Ego-Motion

Autonomous nano-UAV navigation requires accurate ego-motion estimation under stringent size, weight, power, and computing (SWaP-C) constraints, where visual sensors and LiDARs exceed payload limits, optical flow degrades in low-texture scenes, and inertial-only state estimation is susceptible to accumulated drift. While multi-zone time-of-flight (ToF) arrays provide a lightweight metric complement, 6-DoF estimation from merely 384 ranges per frame is challenged by invalid returns, anisotropic observability, and temporal computational scaling. We propose TIO-FORMER, a camera-free, optical-flow-free, and mapless range-inertial odometry framework driven by an IMU and an ultra-lightweight (15 g) payload of six orthogonal 8 x 8 ToF arrays. Our frontend pairs consecutive range grids with a bilateral gated difference, while IMU-guided cross-attention dynamically routes directional features conditioned on platform kinematics. A Streaming Causal Transformer couples an uncompressed Local KV cache with compressed Chunk-FIFO memory, maintaining bounded inference cost and memory footprint independent of flight duration. In real-flight evaluations, TIO-FORMER reduces open-loop position error by 54.4% compared to nano-UAV optical flow and by 66.4%-89.1% over learned inertial baselines. We also evaluate performance across multiple environments and robustness under severe sensing degradation. Deployed on an edge RISC-V companion computer, TIO-FORMER achieves a P95 latency of 10.466 ms and peak resident memory of 6.324 MiB (less than 5 percent system RAM), demonstrating that sparse range sensing provides practical geometric anchoring for resource-constrained micro-aerial robots. Code is available at https://github.com/Ly041021/TIO-Former.

3D hand mesh reconstruction is a challenging yet essential task for downstream applications, including human-robot interaction and AR/VR. Although conventional cameras have been widely adopted for this task, methods that rely on them struggle in low-light environments and under severe motion blur. To address these limitations, event-based cameras have recently attracted attention for their high dynamic range and high temporal resolution. However, applying event cameras to egocentric hand reconstruction remains challenging because camera wearer's motion produces dense background events that obscure hand-specific signals. Although the first egocentric event-based approach mitigates this issue using hand segmentation, its binary hand mask does not distinguish between left and right hands. As a result, the model lacks instance-level hand information and predicts both hands even when only one or neither hand is present. This limitation leads to incorrect inter-hand relationships and degraded reconstruction accuracy. In this paper, we propose EventEgoHands++, a framework for event-based 3D hand mesh reconstruction from an egocentric viewpoint. The proposed method incorporates a Hand Detector that estimates instance-level bounding boxes and masks for both the left and right hands. Moreover, we introduce Adaptive Attention, which dynamically gates the attention based on these detection results to accurately learn the spatial relationship and mutual interactions between the hands. To train and evaluate our framework, we extend the synthetic N-HOT3D dataset and newly construct EEH-R, the largest real-world event-based egocentric hand dataset to date, comprising approximately 1M annotated frames captured in environments including low-light conditions. Extensive experiments on both synthetic and real datasets demonstrate that our method consistently outperforms the baselines.

Learning manipulation from human video requires high-fidelity hand-motion reconstruction in metric units. Today's metric hand labels come from studio rigs and instrumented headsets, and both are confined in the same two ways: neither leaves a prepared setting, and neither is checked against an independent reference. Unconstrained head-worn recording promises the opposite trade-off, scaling with the number of people wearing a device. We therefore introduce MEgoVista, an offline pipeline that turns a single unprepared MEgo View recording into metric two-hand and head motion in one gravity-aligned world frame. Three properties set it apart from existing egocentric reconstruction systems: first, it reconstructs in settings studio volumes and tabletop rigs cannot reach, settling hand ownership at detection so bystander hands stay out of the wearer's trajectory; second, it takes its metric gauge from calibrated stereo rather than a monocular prior, installing scale at initialisation so policies receive physical units, not arbitrary coordinates; third, both outputs are scored inside a motion-capture volume against independent Chingmu optical capture, under a protocol that audits its own reference and charges what a method declines to predict. MEgoVista is offered as a measured route from egocentric video to metric hand supervision, one that widens where such labels can be gathered.

Recent visual generators produce high-fidelity images yet often violate physical consistency under ego-motion, limiting their use for spatial reasoning and embodied planning. Existing benchmarks largely focus on isolated images or single-step quality, leaving this challenge underexplored. We introduce EgoGenEval, a geometry-grounded, pose-free benchmark designed to evaluate the physical consistency of visual generators under ego-motion, and organize our study into two parts. (1) EgoGenEval contains 1,400 cases and 2,360 target views spanning single-step and multi-step ego-motion. It separately measures Camera Motion Grounding (CMG) and Scene State Preservation (SSP), with both metrics validated against blinded human judgments. Evaluating 16 pose-free generators together with two pose-conditioned references reveals that current models struggle to execute camera motion while maintaining scene state, and that no system performs well on both axes at once. (2) To examine whether benchmark-derived data can improve these capabilities, we build EgoGen-Train from the same geometry-grounded pipeline and run controlled SFT studies. These show that pairwise supervision does not reliably improve camera-motion grounding and scene-state preservation together: even at the full training pool and the longest budget, scene preservation gains a fraction of what camera motion does. This points to the pairwise teacher-forced objective itself as the binding constraint, motivating a trajectory-centric paradigm that couples self-conditioned rollouts with explicit pose and visibility supervision.

This paper proposes an open-set ego-noise separation framework for legged-robot audition via annotation-free adaptation and pretrained-model transfer. The framework removes robot-specific ego-noise while preserving environmental sounds whose classes are not specified in advance. Acoustic sensing provides cues about a robot's surroundings beyond the visual field, but walking-induced ego-noise from footstep impacts, joint-backlash rattling, and motor noise severely contaminates the recordings. The framework first uses RecurGraph to select ego-noise-dominant clips from the unlabeled recordings by aggregating clip embeddings into an embedding centroid and propagating scores over an audio-embedding graph. The selected clips are mixed with diverse environmental sounds from a large-scale sound-event dataset to provide paired mixture--target supervision for open-set separation. Transfer-DiT then adapts a general-purpose zero-shot neural separator to achieve high-fidelity open-set ego-noise separation for the target robot. Experiments with bipedal and quadrupedal robots show reliable clip selection and improvements in separation quality and downstream task performance over baseline separators. These results demonstrate the feasibility of annotation-free adaptation without separately recorded ego-noise-only data or manual clip-level annotations.

Complete 3D perception from egocentric video requires recovering the surrounding scene and the wearer's full-body motion in a shared metric frame. Existing methods typically address scene reconstruction and motion estimation separately: scene reconstruction methods ignore the wearer, whereas motion estimation methods lack explicit scene geometry and often depend on external trajectories. Joint recovery is challenging because the two tasks exhibit asymmetric visibility and require different prediction paradigms. The largely visible scene supports deterministic geometric regression, whereas the severely occluded body requires generative motion inference. We therefore propose RESELF (REconstructing the Scene and the sELF), a unified framework that couples deterministic metric geometry reconstruction with geometry-conditioned motion generation. RESELF adapts a geometry foundation model pre-trained on large-scale exocentric data to egocentric video using frame-wise scale and relative-pose consistency objectives. The resulting camera trajectory and latent geometric features condition a diffusion model that recovers the wearer's motion. A subsequent closed-loop kinematic feedback stage further refines the camera head while preserving the reconstructed scene geometry. To support training and evaluation, we curate EE4D-JSM from EgoExo4D by aligning egocentric video, sparse metric scene geometry, camera trajectories, and full-body motion annotations. Experiments show that RESELF outperforms state-of-the-art methods designed for the individual tasks across depth estimation, camera tracking, and full-body motion estimation. Code, models, and datasets will be available at https://ka1guan.github.io/RESELF/.

As Vision-Language Models (VLMs) tackle dynamic 3D spatial reasoning, ego-motion perception becomes essential to resolve monocular scale ambiguity. However, current models often overfit to smooth trajectory priors rather than genuinely understanding physical motion. Consequently, their spatial reasoning degrades severely under large displacements, a phenomenon we term Kinematic Collapse. This failure stems from spurious visual-motion correlations in natural videos and a lack of explicit physical supervision. To evaluate this, we introduce Dyn-3D, a benchmark using counterfactual 3D rendering to rigorously decouple visual changes from true kinematic properties. Furthermore, we propose the TempoVista framework, featuring the Kinematic-GSPO algorithm. By embedding metric physical ground truth into policy optimization, TempoVista explicitly grounds visual representations in 3D space. Experiments demonstrate that our approach significantly improves both motion estimation and robust spatial reasoning by utilizing camera dynamics as an effective geometric calibration signal.

Understanding motion in daily living requires context beyond kinematics, because similar inertial patterns during activities of daily living (ADLs) can reflect intentional stopping, object interaction, or pathological movement impairment. Egocentric vision provides task-related context that may help disambiguate these cases. We investigate this challenge through freezing of gait (FOG) detection in Parkinson's disease (PD), a symptom strongly influenced by contextual factors during ADLs. Using synchronized egocentric video, wearable IMUs, and expert-annotated FOG labels collected from 13 PD participants in their homes, we evaluate frozen representations from pretrained ego-video and time-series foundation models, alongside an IMU-based TCN trained from scratch, under leave-one-subject-out evaluation. The IMU-based TCN achieved the strongest event-detection performance, reaching 42.3 F1 and 83.0 AUROC, compared with 32.6 F1 and 77.2 AUROC for V-JEPA2 ego-video features. Although ego-video alone did not outperform IMU-based sensing, it showed above-chance discrimination, and qualitative analyses suggest that egocentric vision may capture FOG-relevant information independent of IMUs. Together, these results support the use of pretrained ego-video representations to add contextual information to wearable-sensor-based clinical motion understanding in daily living.

Kinematic models provide reliable motion constraints for odometry estimation in featureless environments, where exteroceptive sensing degrades and IMU integration drifts. Learning-based kinematic models can achieve more accurate odometry estimation than model-based methods by capturing nonlinear effects; however, most existing learning-based models are trained on a single embodiment and generalize poorly to new embodiments. This generalization is difficult because the meanings and structures of proprioceptive measurements vary across embodiments, including the number of joints and ground-contact elements (e.g., wheels, feet). To address this challenge, we propose KING, a Graph Neural Network (GNN)-based kinematic model that explicitly incorporates robot embodiments by representing them as a common graph. We show that wheel and leg kinematic models can be expressed by a unified representation, enabling a single model for both wheeled and legged robots. Trained on datasets spanning diverse embodiments, KING provides a unified representation of wheeled and legged kinematics and achieves high-accuracy odometry estimation in real environments. KING estimates accurate odometry using only an embodiment description (e.g., a URDF file) and on-board proprioception (encoders and an IMU) and can be adapted to new robot embodiments through few-shot learning with only one minute of data, avoiding retraining from scratch on a new dataset for each robot. The project page is available at: https://smrg-aist.github.io/king_project_page/

Egocentric devices, such as wearable front-facing cameras, provide a unique perspective for capturing the continuous interaction between a human viewer and the surrounding environment. A holistic and efficient multimodal model capable of reconstructing this 4D representation is therefore highly desirable. However, existing approaches often rely on auxiliary inputs such as pre-computed camera trajectories, treat scene perception and human ego-motion modeling as separate problems despite their strong interdependency, and suffer from slow inference time. To address these limitations, we present ReViV, the first unified framework for holistic egocentric 4D reconstruction that extracts both viewer and view dynamics from a single monocular RGB video. We formulate the task as learning the full joint probability distribution over multimodal signals, including RGB video, camera trajectory, gaze direction, full-body motion, hand motion, and depth. Powered by a Masked Generative Egocentric Transformer, ReViV operates within a single feed-forward architecture to simultaneously reconstruct the temporally consistent 4D reconstruction across the viewer and the view with fast inference speed. Extensive experiments on diverse benchmarks, including HoloAssist, HOT3D, ARCTIC, Aria Digital Twin, and TACO, demonstrate that ReViV achieves state-of-the-art accuracy and efficiency across holistic ego-body, hand, and gaze reconstruction, camera tracking, while maintaining highly competitive egocentric depth estimation without relying on heavy task-specific priors. Code and models are fully open-sourced: https://reviv4d.github.io/.

Classical approaches to event-based egomotion estimation, including those adopted by the top-performing teams of the ELOPE challenge, rely on geometric optimization frameworks such as contrast maximization, homography estimation, or dense optical flow combined with analytic motion inversion. This work investigates the geometric structure that emerges inside a multi-modal network for egomotion estimation. Event tensors, inertial measurements, and range signals are fused through a cross-modal attention architecture and trained in a batch setting. We analyze the latent space geometry and attention dynamics, showing that (i) embeddings lie on low-dimensional manifolds aligned with motion variables, (ii) attention weights adapt with angular excitation and visual reliability, and (iii) the fused representation recovers classical observability cues. These results bridge analytical estimation theory and modern data-driven fusion.

Relative pose estimation is a fundamental capability for collaborative perception and coordination in multi-robot systems. However, robots encountering each other in real-world environments often operate in short interaction windows and must operate under limited communication bandwidth with intermittent or missing visual overlap caused by occlusions or limited fields of view. Existing approaches typically rely on global reference frames, assume sustained view overlap, or incur prohibitive communication costs, thereby limiting their applicability to ephemeral collaborative perception. To address these challenges, we introduce communication-efficient relative pose estimation (CERPE), a system-level framework that coordinates vision foundation models to jointly estimate ego-motion and inter-robot relative pose. CERPE reduces unnecessary raw-observation exchange by using continuously shared fixed-size descriptors to gate event-triggered raw-image requests independently of pose estimation. Non-overlapping encounters are handled by propagating inter-robot relative poses through metrically scaled ego-motion, thus maintaining relative pose estimates even in the absence of visual overlap. Experiments in simulation and real-world robots show that CERPE improves 6-DoF relative pose estimation over selected baselines in ephemeral collaborative perception.

A robot must understand the state of its own body, but a camera sees only part of it. Force and contact leave almost no trace in a single frame, and raw vision features read force at $R^2$ at or below $0.10$ on every robot we test. We present Kepler-Encoder-v0.1, a robot-first multimodal encoder that treats robot state as a modality and fuses vision, proprioception, and force/torque into a single shared latent with a learned-query cross-attention layer, trained self-supervised by masked cross-modal prediction under the LeJEPA/SIGReg objective. At evaluation only vision enters, which poses a sharp question. Does fusing state into training make the vision-only latent carry anything the pixels do not already contain? On the RH20T corpus the answer is yes, precisely where the camera is weakest. On held-out scenes, the vision-only latent recovers end-effector state, and force in particular, significantly above both raw frozen-ViT features and a compute-matched vision-only control on every sensored robot, though absolute force recovery at a single timestep is modest; on motor state, which the camera largely sees, it is statistically tied with the strongest vision baselines, and it is the only feature whose latent geometry tracks state. A single embodiment-agnostic encoder covers four robots, and a data-matched control shows this breadth reflects embodiment diversity rather than data volume. The frozen latent is directly useful. Its own cross-modal prediction error is a training-free invalid-state monitor (AUROC $0.90$ on out-of-range states, $0.69$ on scene-swapped states), and a diffusion decoder (PixNerd) reconstructs the camera frame from the latent, confirming the spatial compression preserves world-state. This report validates the single-timestep case; native-rate temporal fusion is the next step.

Vision-centric autonomous driving requires accurate metric geometry and ego-motion estimation from synchronized multi-camera observations. Recent visual geometry models show strong performance in pose estimation, depth prediction, and 3D reconstruction, but are not tailored to rigid multi-camera driving systems. They often encode camera poses as entangled representations, in which time-varying ego-motion and static camera-rig geometry are jointly modeled, limiting the utilization of vehicle-side geometric priors. We propose Trajectory-Rig Decoupled Metric Geometry Learning (TRIG), a geometry perception framework for autonomous driving. TRIG factorizes camera poses into ego-trajectory and camera-rig components, enabling separate modeling of ego-motion and static multi-camera topology. We introduce decoupled pose encoding and supervision, which separately constrain trajectory evolution and rig geometry for metric-consistent learning. Moreover, sparse Temporal--Spatial attention separates cross-camera interaction from temporal aggregation, reducing global attention cost while preserving geometric reasoning. Experiments on five autonomous driving benchmarks show that TRIG achieves state-of-the-art performance in pose estimation, metric depth prediction, and 3D reconstruction.

Constructing octrees for mobile robots that process continuous point streams in real time poses significant computational and memory challenges. Standard global structures often suffer from high latency and unbalanced tree growth. We introduce the Ego-Centric Octree (ECO), a spatial data structure that acts as a 3D sliding window, dynamically bounding the mapping space to the robot's immediate surroundings. ECO uses an efficient incremental update algorithm that categorizes the environment into shift-out, shift-in, and overlap regions, eliminating redundant global coordinate transformations. Evaluations on the KITTI benchmark demonstrate that ECO reduces update times by up to 25.60% (24.87% on average) compared to full static reconstruction and by up to 67.52% (54.60% on average) compared to a bounded incremental baseline. Furthermore, ECO substantially lowers the total system latency of downstream tasks, running up to 34.17% faster than full reconstruction in voxel-map generation. In dynamic scenes, ECO naturally retains a short-term temporal memory of moving objects, providing useful temporal context while keeping update cost bounded and the tree balanced for real-time spatial perception.

Autonomous robots often need to move their camera before they can act: to inspect an object, reveal an occluded region, or obtain a view that responds to a user's intent. While vision-language navigation translates instructions to base motion and vision-language-action policies map instructions to manipulation actions, language-conditioned camera motion remains comparatively underexplored as a first-class action. We formulate language-conditioned camera motion generation: given a current RGB observation and a free-form natural-language intent, predict a relative target camera pose for the next observation. This task is inherently non-trivial: viewpoint changes are driven by latent perceptual intentions, and a valid motion may operate at different semantic granularity, from entering a room to looking around a corner, inspecting a visible object, or revealing an occluded detail. To model this structure, we mine multi-intention camera-motion supervision from egocentric video, pairing plausible intents and observation-gain descriptions with relative SE(3) target poses. We propose LIME, a vision-language camera-motion generator that combines an auto-regressive observation-gain output with a continuous flow-matching pose head. This design lets the model jointly predict what the next view should reveal while representing multi-hypothesis target views. Across experiments and downstream robotic tasks, we show that LIME can learn to actively choose camera poses from passive human video, turning ordinary egocentric recordings into supervision for intent-aware active perception.

We present OctoSense, an open-source sensor platform with stereo RGB and event cameras, LiDAR, a thermal camera, an inertial measurement unit, RTK-corrected global positioning system, and proprioception (CAN bus data from a car, and joint angles for a quadruped robot). The eponymous OctoSense dataset contains 59 hours of time-synchronized driving data across different types of environments at different times of the day, including situations with highly degraded sensors. We demonstrate multi-modal self-supervised learning using such real-world robotics data, where sensors have different representations, frequencies, latencies and noise. Our approach, a "late-fusion" masked autoencoder, (i) uses modality-specific tokenizers to account for different spatiotemporal characteristics of these sensors, and (ii) caches modality-specific tokens at inference time to process new measurements as they come. This architecture (i) is fast (6.68 ms and 112 ms on NVIDIA 5090 and Orin NX respectively, to compute the representation), (ii) performs better than existing image-only foundation models on tasks such as estimation of optical flow, depth, semantic segmentation, and ego-motion (translation, rotation, and steering angle), and (iii) predicts robustly at nighttime or in situations where sensory data is degraded. See our project page for links to the dataset, code, and supplementary videos: https://abisulco.com/octosense/.

Robust multi-sensor fusion is essential for reliable autonomy in diverse and degraded environments, where sensor reliability can fluctuate rapidly. Because different modalities fail in distinct ways, effective fusion should adaptively balance complementary cues rather than rely on fixed weighting. This adaptability is particularly important for ego-motion estimation, since accurate updates depend on the consistent integration of complementary sensor information. We propose ADM-Fusion, an end-to-end deep learning based multi-sensor fusion method designed to adapt to environmental changes and sensor degradation. ADM-Fusion employs an adaptive sensor mixture-of-experts framework with content-aware routing to dynamically assign weights to sensor inputs in real time. The system further incorporates separate translation and rotation branches, coupled through a cross-task attention mechanism to preserve task-specific specialization while enabling information sharing. ADM-Fusion is trained on the CARLA-LOC simulated dataset and subsequently fine-tuned on KITTI real-world data, demonstrating effective simulation-to-real transfer. Experiments show that ADM-Fusion remains robust under degraded conditions while maintaining competitive performance against existing methods.

Forecasting the evolution of dynamic environments is crucial for autonomous agents. While generative world models have recently achieved high photorealism in 2D video synthesis by mixing ego-motion and environmental dynamics within the image plane, they exhibit physical inconsistencies, such as morphing or vanishing objects, especially over long time horizons. In this paper, we propose FR3D, a world model that predicts a persistent 3D latent representation for future dynamic 3D reconstruction. Unlike prior works that treat the world as a sequence of image-based features, FR3D explicitly decouples the 3D evolution of the scene from the agent's trajectory, treating the inferred ego-motion as a latent proxy for action. This disentanglement resolves the ambiguities between self-motion and world-motion, ensuring geometric consistency into the future. Furthermore, we introduce a teacher-student distillation strategy that leverages the spatial "common sense" of off-the-shelf foundation models, leading to robust zero-shot generalization. Extensive experiments demonstrate FR3D's strong performance for future dynamic 3D reconstruction from monocular observations across multiple datasets, even 2 seconds into the future. Project page: https://fr3d-wm.github.io.

While video segmentation has advanced rapidly on short clips and closed-set benchmarks, open-world video segmentation remains largely unexplored. The challenge is twofold: (1) existing methods are not designed to support object discovery and identity maintenance in long videos of dynamic ego-motion, and (2) existing evaluation protocols rely on a rigid 1:1 matching that unfairly penalizes semantically valid predictions with mismatched granularity. To address both gaps, we introduce Savvy, a practical and strong system for zero-shot open-world long-horizon video segmentation. Savvy combines hierarchical mask discovery, deferred admission, and track consolidation to support persistent object discovery, safe track promotion, and stable long-range identity maintenance. We further propose OGA, a granularity-aware evaluation suite for open-world video segmentation. Built on a Granularity-Agnostic (GA) matching protocol, OGA relaxes conventional 1:1 matching to an n:1 mapping, but still enforces temporal rigor by detecting support discontinuities through sever points and scoring each reference object through its dominant coherent fragment. This prevents fragmented or flickering support from being over-rewarded while enabling GA-adapted metrics and structural diagnostics: identity persistence (IP), and identity concentration (IC). On VIPSeg, we show that standard 1:1 evaluation substantially underestimates open-world methods, whereas GA evaluation recovers much of their suppressed performance. On the more realistic long-horizon benchmarks: ScanNet and HM3D, Savvy consistently outperforms strong baselines across both classical and proposed metrics, including STQ, VPQ$_\infty$, IP and IC. Together, these results establish a practical benchmark and a strong baseline for open-world long-horizon video segmentation.

As a bio-inspired intelligent sensor, event cameras have introduced a new paradigm in the intelligent perception of spatiotemporal information and visual motion estimation, characterized by their high temporal resolution, low latency, and minimal power consumption. However, their asynchronous data streams present significant challenges to traditional synchronous, frame-based algorithms. To address these challenges, this paper presents a novel framework for full degree of freedom (DoF) egomotion estimation directly from asynchronous optical flow, specifically targeting the joint recovery of angular and linear velocities. We decouple the differential epipolar constraint into distinct angular and linear velocity components, and derive its formulation for asynchronous data. Based on this formulation, an optimization algorithm is developed that enables full-DoF egomotion estimation leveraging at least five points. Furthermore, by applying a first-order approximation to rotational dynamics, we transform the constraint equations into a polynomial form, resulting in the first algebraic minimal 5-point solver for this formulation. To ensure real-time performance in high-speed scenarios, we additionally propose an accelerated solver achieved by truncating high-order angular velocity terms. Extensive evaluations on both synthetic and real-world datasets demonstrate that the asynchronous approach outperforms traditional synchronous methods, particularly in its accuracy and robustness to spatiotemporal noise. We believe that this work establishes a critical foundation for efficient and accurate continuous-time motion estimation in high-speed robotics applications.

Simulation is central to robot learning, yet the sim-to-real gap remains a major bottleneck. Existing approaches often tackle visual or dynamic gaps separately, overlooking how these individual mismatches accumulate and propagate throughout the robot's state evolution. In this paper, we introduce QuadVerse, an integrated framework that uses reconstructed scenes as a calibration substrate for aligning visual perception, physical interaction, and actuator dynamics. From captured RGB videos, we reconstruct geometry-constrained 3D Gaussian Splatting (3DGS) scenes that support batched photorealistic ego-view rendering and collision-ready semantic mesh extraction. The meshes further enable contact calibration by initializing spatially varying friction priors and refining them through trajectory-based posterior search. To address remaining actuator discrepancies, QuadVerse trains a residual dynamics compensator by replaying real-world trajectories on the contact-calibrated terrain, reducing the entanglement between terrain-induced contact errors and actuator non-idealities. Experiments show that QuadVerse improves reconstruction quality and locomotion tracking over relevant baselines. Leveraging this foundation, we demonstrate robust zero-shot visual-navigation policy deployment without task-specific real-world rollouts.

Agile quadrotor flight in cluttered scenes requires more than a reactive mapping from a depth image to a control command: the vehicle must remember which regions have been observed, infer nearby occupied space, and act under partial visibility and tight latency. In this paper, we present Mapping-Aware Dreamer (MAD), a geometry-aware world model for vision-based quadrotor flight. Instead of using raw-image reconstruction as the main self-supervised objective, MAD learns recurrent latent dynamics that reconstruct robocentric occupancy and visibility grid maps together with proprioceptive states. This design forces the latent state to encode local geometry, visibility history, and ego-motion in a form that is directly relevant to collision avoidance. MAD is trained in DiffAero using a GPU-parallel map-construction module that provides high-throughput supervision for occupancy and visibility. The learned representation is used in three policy-learning modes: imagination-based MAD-Dreamer and feature-extractor variants based on PPO and SHAC. Across visual navigation and racing tasks, MAD-based agents achieve higher success rates, faster flight, and better cross-task transfer than corresponding vision-only baselines. The model also produces interpretable map predictions and accurate ego-motion estimates from depth observations. We further deploy the learned policy on a physical quadrotor with an Intel RealSense D435i and demonstrate safe indoor and outdoor flight under limited sensing, reaching 9.66 m/s in simulation and 5.05 m/s in real-world forest experiments. These results show that mapping-aware world models provide a practical middle ground between modular aerial navigation and end-to-end learning.

LiDAR odometry is a fundamental component of autonomous robotic systems, relying on geometric registration between consecutive point clouds to estimate ego-motion. However, traditional geometric approaches often degrade in dynamic or unstructured environments due to unreliable correspondences caused by moving objects, sparse geometric features, vegetation, and semantically ambiguous structures. Existing works have shown that, some of these limitations can be addressed by introducing semantic information from the environment in the registration process. In this work, we build on this, and show that not all elements in the environment are equally relevant for registration. Hence, we propose a semantic class-weighted ICP for LiDAR odometry. Instead of strictly filtering out points belonging to specific semantic classes, the proposed approach weights the residuals of points belonging to semantic categories based on their expected geometric stability. This strategy enables informative but potentially unstable structures, to contribute to the registration process while mitigating the influence of dynamic objects. The experimental evaluation was conducted on the SemanticKITTI and RELLIS-3D datasets, which include urban, highway, rural, and off-road environments. The empirical results show that the proposed Semantic-weighted ICP improves pose estimation, especially in challenging off-road scenarios where conventional rigid features are scarce. Furthermore, the analysis reveals that the effectiveness of this weighting strategy is highly environment-dependent, influenced by the structural and semantic composition of the scene.

Video world models are a foundational generative technology for embodied AI and the Metaverse, yet existing approaches are inherently limited to a single agent observing from a single perspective. Extending these models to multi-agent settings introduces two critical challenges: data scarcity (coordinated multi-view recordings are prohibitively expensive to collect for general open-domain scenarios) and world state alignment (independently generated video streams cannot ensure that shared physical environments and events evolve consistently across views). To address these challenges, we propose MetaWorld, a novel framework that scales multi-agent video world models to open-domain environments directly from single-view videos. First, we introduce Monocular World-State Unrolling (MWSU) to explicitly decompose monocular footage into the camera operator's ego-motion and the visible subject's spatial trajectory. This camera-trajectory decomposition naturally extracts synchronized multi-agent motion data within a shared 3D space, completely bypassing the need for multi-camera setups. Second, for precise visual control, we develop the Subject-Aware World Generator to enable appearance-driven simulation conditioned on per-agent identity images. Finally, to ensure both views are grounded in the identical physical reality, we propose World-State Alignment, a per-frame inter-branch cross-attention mechanism inserted at every transformer layer of the video DiT. By jointly synchronizing the denoising process, WSA enforces both static geometric consistency and dynamic motion consistency, encouraging that the shared 3D environment and physical events remain well-aligned across both egocentric views. Extensive experiments demonstrate that MetaWorld achieves superior cross-view consistency and identity fidelity, establishing a highly scalable, physics-driven paradigm for multi-agent video world modeling.

Recovering ego-camera orientation from manipulation video is a prerequisite for disentangling hand motion from camera motion, a key step in imitation learning from egocentric demonstrations. The obvious approach, inferring orientation from scene geometry, fails when hands occlude the frame: VGGT, a 1B-parameter scene reconstruction model, scores worse than a constant predictor on the TACO benchmark. We identify an alternative visual concept that is present precisely when scene geometry is absent: kinematic coupling dynamics, the structured physical relationship between wrist motion and camera orientation imposed by the arm-shoulder-head chain. We find that this concept is compact (4D inter-wrist features outperform 126D full hand keypoints), temporal (requiring a GRU over short windows rather than per-frame retrieval), and physically grounded (transferring zero-shot across datasets because it is rooted in anatomy rather than scene appearance). Trained only on tabletop manipulation, WristCompass transfers zero-shot to Epic Kitchens cooking video, achieving 14.3$^\circ$ median geodesic error and approaching the performance of a 1B-parameter scene model at 200K GRU parameters.

Understanding dynamic 3D environments is essential for safe autonomous driving, particularly when reasoning about human-centric, nonrigid agents. However, existing weakly supervised occupancy prediction frameworks predominantly assume rigid-body motion and rely on simple frame-to-frame offsets, limiting their ability to capture fine-grained deformations and maintain temporal coherence. To address this issue, we propose DeGO, a deformable Gaussian occupancy framework that unifies decoupled Gaussian deformation with factorized 4D foundation-model distillation. DeGO disentangles rigid and nonrigid motion, enabling each Gaussian primitive to evolve through both deformation and offset-based updates. In parallel, a factorized 4D distillation strategy transfers cross-camera and cross-frame knowledge from the VGGT foundation model, producing foundation-aligned features that enhance temporal consistency. Experiments on the Occ3D-NuScenes benchmark demonstrate that our method achieves state-of-the-art performance under weak supervision, delivering 13.5% gains on human-centric instances and 10.9% overall improvements. These results highlight the effectiveness of deformation-aware and foundation-guided occupancy modeling for dynamic scene understanding. The code is publicly available: https://github.com/vita-epfl/DeGO

Controllable and physically grounded egocentric video generation is essential for embodied agents to reason about how their own and others' actions manifest and change the world. Compared to generic video synthesis, egocentric generation is especially challenging: the camera is tightly coupled to the actor, leading to rapid viewpoint changes and frequent self-occlusions; the underlying actions are subtle, articulated, and often only partially visible; and both the people and the scene state must evolve consistently with the specified controls. We present E$^3$C, a controllable video diffusion framework for egocentric generation that builds structured and compact conditions disentangling persistent scene structure from human-driven dynamics. From context frames, E$^3$C constructs a semi-dense point cloud-based 3D memory and augments each point with appearance descriptors from video-VAE features. Rendering this memory into target viewpoints produces conditioning aligned with the target frames. Human dynamics are modeled separately. The observed people in the scene are controlled by skeleton renderings (exo human control), while the camera wearer is specified by their 3D body joints and 6DoF wrist motion (ego human control). To preserve ego human control when the wearer's body parts are invisible, we introduce an ego motion encoder that produces persistent cross-attention tokens. Experiments on Nymeria show that E$^3$C improves visual fidelity, camera-motion accuracy, object consistency, and ego & exo human control over strong baselines, while also enabling intuitive scene editing.

Object detection from Unmanned Aerial Vehicles (UAVs) is challenged by severe ego-motion, camera jitter, and large scale variations. While modern detectors perform well on static images, their direct application to UAV video often fails, particularly for small objects in dynamic scenes. Existing motion-based methods either rely on computationally expensive optical flow or use single-interval differencing, which is sensitive to jitter and limited in capturing diverse motion patterns. We propose a vision-only motion-guided detection framework that decouples target motion from camera-induced disturbances. A homography-based Global Motion Compensation (GMC) first aligns adjacent frames. We then introduce a Dual-Interval Motion Extraction strategy that captures both short-term and long-term motion cues. To integrate these cues, a lightweight Motion-Guided Attention (MGA) module enhances feature representations within a Feature Pyramid Network. Experiments on the VisDrone-VID dataset demonstrate consistent improvements over a strong YOLOv8 baseline under severe ego-motion. Ablation studies further confirm the effectiveness of the dual-interval design and the proposed motion-guided attention mechanism.

Retrieving the 3D kinematics of articulated objects from monocular video is a fundamental challenge in computer vision. Existing methods rely on complex video setups or cues such as long-term point tracking or wide-baseline matching, but are frequently brittle under severe occlusions, rapid camera ego-motion, or weak local features. Learning-based methods, meanwhile, struggle to generalize beyond their training categories. We propose a category-agnostic optimization framework that treats articulated object understanding as a primitive-fitting problem. Geometric primitives serve as a proxy representation that avoids the pitfalls of unstable point tracks; a novel mechanism organizes them into coherent parts constrained by revolute and prismatic joints. Our formulation jointly optimizes part segmentation and joint parameters, recovering complex kinematics from a single casually captured video. A visibility-aware procedure handles partial observations and occlusions inherent to real-world data. We also propose the AiP-synth and AiP-real benchmarks, featuring significant camera motion and heavy occlusions, and outperform existing methods. Project page: https://aartykov.github.io/Articulation-in-Prime/

With recent advances in embodied agents and AR devices, egocentric observations are readily available as input for real-world interactive online applications. However, egocentric viewpoints can only sporadically observe hands, in addition to the estimated head trajectory. We propose EgoForce, an online framework for reconstructing long-term full-body motion from noisy egocentric input. While existing generative frameworks can robustly handle noisy and sparse measurements, they assume a fixed-length observation window is available and are thus not suitable for real-time applications. Faster inference often relies on autoregressive prediction, sacrificing robustness. In contrast, we adopt a diffusion-based method with a temporally asymmetric noise schedule inspired by Diffusion Forcing. Specifically, our approach models temporally evolving uncertainty and incrementally denoises states as new streaming observations arrive. Combined with a noise-robust imputation strategy, EgoForce progressively generates stable and coherent full-body motion under strict causal constraints. Experiments demonstrate that our online framework outperforms existing online and offline methods, enabling long-horizon, full-body motion reconstruction in challenging egocentric scenarios.

Egocentric 3D hand pose estimation and gesture recognition are essential for immersive augmented/virtual reality, human-computer interaction, and robotics. However, conventional frame-based cameras suffer from motion blur and limited dynamic range, while existing event-based methods are hindered by ego-motion interference, monocular depth ambiguity, and the lack of large-scale real-world stereo datasets. To overcome these limitations, we propose EgoEV-HandPose, an end-to-end framework for joint 3D bimanual pose estimation and gesture recognition from stereo event streams. Central to our approach is KeypointBEV, a flexible stereo fusion module that lifts features into a canonical bird's-eye-view space and employs an iterative reprojection-guided refinement loop to progressively resolve depth uncertainty and enforce kinematic consistency. In addition, we introduce EgoEVHands, the first large-scale real-world stereo event-camera dataset for egocentric hand perception, containing 5,419 annotated sequences with dense 3D/2D keypoints across 38 gesture classes under varying illumination. Extensive experiments demonstrate that EgoEV-HandPose achieves state-of-the-art performance with an MPJPE of 30.54mm and 86.87% Top-1 gesture recognition accuracy, significantly outperforming RGB-based stereo and prior event-camera methods, particularly in low-light and bimanual occlusion scenarios, thereby setting a new benchmark for event-based egocentric perception. The established dataset and source code will be publicly released at https://github.com/ZJUWang01/EgoEV-HandPose.

Tiny UAV detection from an onboard event camera is difficult when the observer and target move at the same time. In this motion-on-motion regime, ego-motion activates background edges across buildings, vegetation, and horizon structures, while the UAV may appear as a sparse event cluster. Unlike static- or ground-observer event-based UAV detection, onboard UAV-view detection breaks the clean-background assumption because sensor ego-motion can activate dense background events over the entire field of view. To explore this practical problem, we present M$^2$E-UAV, to the best of our knowledge, the first onboard UAV-view motion-on-motion event-based dataset and benchmark for tiny UAV detection, where both the sensing platform and the target UAV are moving. M$^2$E-UAV provides synchronized event streams and IMU measurements collected from an onboard sensing platform, together with event-level UAV foreground labels derived from temporally propagated 10 Hz bounding-box annotations. The processed benchmark contains 87,223 training samples and 21,395 validation samples across four scene families: sunny building-forest, sunny farm-village, sunset building-forest, and sunset farm-village. We define a train/validation split and an evaluation protocol for comparing representative existing baselines across event-frame, voxel-grid, and point-set representations, with optional IMU input. The benchmark results show that existing baselines remain limited under sparse tiny-target evidence and dense ego-motion-induced background events. Code and benchmark files will be released at https://github.com/Wickyan/M2E-UAV.

Monocular depth estimation (MDE) with self-supervised training approaches struggles in low-texture areas, where photometric losses may lead to ambiguous depth predictions. To address this, we propose a novel technique that enhances spatial information by applying a distance transform over pre-semantic contours, augmenting discriminative power in low texture regions. Our approach jointly estimates pre-semantic contours, depth and ego-motion. The pre-semantic contours are leveraged to produce new input images, with variance augmented by the distance transform in uniform areas. This approach results in more effective loss functions, enhancing the training process for depth and ego-motion. We demonstrate theoretically that the distance transform is the optimal variance-augmenting technique in this context. Through extensive experiments on KITTI, Cityscapes, Waymo, NYUv2 and ScanNet our model demonstrates robust performance, surpassing competing self-supervised methods in MDE.

Forecasting future 3D hand pose sequences from egocentric video is essential for understanding human intention and enabling embodied applications such as AR/VR assistance and human-robot interaction. However, this task remains a highly challenging problem because egocentric hand motion is driven by complex human intent, exhibits highly dexterous articulations, and is observed under drastic viewpoint shifts induced by ego-motion. In this work, we introduce EggHand, a foundation-model-based framework for egocentric hand pose forecasting that unifies multimodal semantic reasoning with dynamic motion modeling. Our approach couples an action decoder from a Vision-Language-Action (VLA) model, which captures the structured temporal dynamics of hand motion, with an egocentric video-text encoder that provides viewpoint-aware contextual information learned from large-scale first-person video. Together, these components overcome the brittleness of generic visual encoders under ego-motion and enable joint reasoning over motion, context, and high-level intent-without relying on body pose or external tracking. Experiments on the EgoExo4D dataset show that EggHand sets a new state of the art in forecasting accuracy, remains robust under severe ego-motion, and further enables controllable prediction via language-based task prompts. Project page: https://jyoun9.github.io/EggHand

Surface electromyography (sEMG) records muscle activity during hand movement and can be decoded to recover detailed hand articulation. EMG and egocentric vision are complementary for hand sensing: EMG captures fine-grained finger articulation even under occlusion and poor lighting, while vision provides global hand configuration. However, no existing dataset synchronizes both modalities. We present EgoEMG, a multimodal egocentric dataset for bimanual hand pose estimation. EgoEMG includes bilateral wristband EMG with 16 total channels (8 per wrist) sampled at 2 kHz, 120 Hz IMU, egocentric wide-angle RGB video, external RGB-D video, and mocap-derived hand motion with wrist articulation angles. The dataset covers 41 participants performing 60 gesture classes, including 30 single-hand gestures and 30 bimanual gestures, totaling more than 10 hours of recording. We also introduce a benchmark with three tasks -- EMG-to-pose, vision-to-pose, and EMG+vision fusion -- under a shared joint-angle prediction target and common generalization split axes (cross-gesture, cross-user, and combined). As baselines, we evaluate EMGFormer for EMG-to-pose and generic ResNet/ViT backbones for vision-to-pose. We further study a residual fusion architecture that improves over matched lightweight vision-only baselines. Together, EgoEMG and its benchmark establish a foundation for future research on multimodal hand pose estimation with EMG and vision.

This paper studies full-body 3D human motion recovery from head-mounted device signals. Existing diffusion-based methods often rely on global distribution matching, leading to local joint reconstruction errors. We propose MotionGRPO, a novel framework leveraging reinforcement learning post-training to inject fine-grained guidance into the diffusion process. Technically, we model diffusion sampling as a Markov decision process optimized via Group Relative Policy Optimization (GRPO). To this end, we introduce a hybrid reward mechanism that combines a learned conditioned perceptual model for global visual plausibility and explicit constraints for local joint precision. Our key technical insight is that policy optimization in diffusion-based recovery suffers from vanishing gradients due to limited intra-group sample diversity. To address this, we further introduce a noise-injection strategy that explicitly increases sample variance and stabilizes learning. Extensive experiments demonstrate that MotionGRPO achieves state-of-the-art performance with superior visual fidelity

While zero-shot appearance-based 3D gaze estimation offers significant cost-efficiency by directly mapping RGB images to gaze vectors, its reliability in Human-Robot Interaction (HRI) settings remains uncertain. Existing benchmarks frequently overlook fundamental HRI conditions, such as dynamic camera viewpoints and moving targets in video. Furthermore, current cross-dataset evaluations often suffer from a complexity gap, where methods trained on diverse datasets are tested on significantly smaller and less varied sets, failing to assess true robustness. To bridge these gaps, we introduce Gaze4HRI, a large-scale dataset (50+ subjects, 3,000+ videos, 600,000+ frames) designed to evaluate state-of-the-art performance against critical HRI variables: illumination, head-gaze conflict, as well as the motion of camera and gaze target in video. Our benchmark reveals that all evaluated methods fail in at least one condition, identifying steeply-downward gaze as a universal failure point. Notably, PureGaze trained on the ETH-X-Gaze dataset uniquely maintains resilience across all other conditions. These results challenge the recent focus in the literature on complex spatial-temporal modeling and Transformer-based architectures. Instead, our findings suggest that extensive data diversity, as exemplified by the ETH-X-Gaze dataset, serves as the primary driver of zero-shot robustness in unconstrained environments, while resilience-enhancing frameworks, such as PureGaze's self-adversarial loss for gaze feature purification, provide a substantial further improvement. Ultimately, this study establishes a rigorous benchmark that provides practical guidelines for practitioners as well as reshaping future research. The dataset and codes are available at https://gazeforhri.github.io.

Most existing heterogeneous cooperative perception methods depend on prior preparation like offline joint training or tailored collaborator-model adaptation. Such preprocessing is, however, generally impractical in real scenarios, as agents are usually independently trained by different developers and meet occasionally online. This work investigates \emph{preparation-free heterogeneous cooperative perception}, where agents use independently trained single-agent detectors without any pre-deployment coordination. We find direct cross-agent fusion under this setting greatly underperforms ego-only perception. We present BOLT, a lightweight plug-and-play module that adapts neighboring features online via ego-as-teacher distillation, requiring only ego predictions without ground-truth labels. BOLT leverages high-confidence ego perception features to guide cross-agent feature-domain alignment, while enabling neighbors to contribute features in the ego's low-confidence regions. With only 0.9M trainable parameters, BOLT improves AP@50 by up to 32.3 points over vanilla unadapted fusion in the preparation-free setting. It consistently outperforms ego-only results on DAIR-V2X and OPV2V, across different encoder pairs and fusion strategies. Code: https://github.com/sidiangongyuan/BOLT.

We present SS3D, a web-scale SfM-based self-supervision pretraining pipeline for feed-forward 3D estimation from monocular video. Our model jointly predicts depth, ego-motion, and intrinsics in a single forward pass and is trained/evaluated as a coherent end-to-end 3D estimator. To stabilize joint learning, we use an intrinsics-first two-stage schedule and a unified single-checkpoint evaluation protocol. Scaling SfM self-supervision to unconstrained web video is challenging due to weak multi-view observability and strong corpus heterogeneity; we address these with a multi-view signal proxy (MVS) used for filtering and curriculum sampling, and with expert training distilled into a single student. Pretraining on YouTube-8M (~100M frames after filtering) yields strong cross-domain zero-shot transfer and improved fine-tuning performance over prior self-supervised baselines. We release the pretrained checkpoint and code.

While Vision-Language Models (VLMs) have advanced high-level reasoning in autonomous driving, their ability to ground this reasoning in the underlying physics of ego-motion remains poorly understood. We introduce EgoDyn-Bench [Project page: (https://tum-avs.github.io/EgoDyn-Bench-Website/), Code: (https://github.com/TUM-AVS/EgoDyn-Bench), Dataset: (https://huggingface.co/datasets/fnc1901/EgoDyn-Bench)], a diagnostic benchmark for evaluating the semantic ego-motion understanding of vision-centric foundation models. By mapping continuous vehicle kinematics to discrete motion concepts via a deterministic oracle, we decouple a model's internal physical logic from its visual perception. Our large-scale empirical audit spanning 20$+$ models, including closed-source MLLMs, open-source VLMs across multiple scales, and specialized VLAs, identifies a significant Perception Bottleneck: while models exhibit logical physical concepts, they consistently fail to accurately align them with visual observations, frequently underperforming classical non-learned geometric baselines. This failure persists across model scales and domain-specific training, indicating a structural deficit in how current architectures couple visual perception with physical reasoning. We demonstrate that providing explicit trajectory encodings substantially restores physical consistency across all evaluated models, revealing a functional disentanglement between vision and language: ego-motion logic is derived almost exclusively from the language modality, while visual observations contribute negligible temporal signal. This structural finding provides a standardized diagnostic framework and a practical pathway toward physically aligned embodied AI. Ego-motion - Physical Reasoning - Foundation Models

Despite rapid progress, embodied navigation in dynamic and unstructured urban environments remains brittle. Most existing approaches directly map monocular visual inputs to actions through end-to-end pixel-to-action training, assuming that accurate spatiotemporal (4D) scene understanding will emerge implicitly. While appealing, this paradigm requires large amounts of pixel-to-action supervision that are difficult to obtain. This challenge is amplified in dynamic, unstructured settings, where robust navigation requires precise 4D scene modeling. To address these limitations, we present Stereo4DWalker, a 4D-aware embodied navigation model that leverages stereo inputs and explicitly builds structured 4D representations of geometry and motion. These 4D structures are integrated into the navigation transformer through simple yet effective 4D-conditioned attention layers. To support scalable training, we curate a large-scale stereo navigation dataset with automatically annotated actions from Internet stereo videos. Our experiments show that Stereo4DWalker surpasses state-of-the-art performance using only 1.5% of the training data, highlighting the effectiveness of explicit 4D visual modeling for data-efficient and robust urban navigation.

Traditional Visual Odometry (VO) and Visual Inertial Odometry (VIO) methods rely on a 'pose-centric' paradigm, which computes absolute camera poses from the local map thus requires large-scale landmark maintenance and continuous map optimization. This approach is computationally expensive, limiting their real-time performance on resource-constrained devices. To overcome these limitations, we introduce Sparse Motion Field Visual Odometry (SMF-VO), a lightweight, 'motion-centric' framework. Our approach directly estimates instantaneous linear and angular velocity from sparse optical flow, bypassing the need for explicit pose estimation or expensive landmark tracking. We also employed a generalized 3D ray-based motion field formulation that works accurately with various camera models, including wide-field-of-view lenses. SMF-VO demonstrates superior efficiency and competitive accuracy on benchmark datasets, achieving over 100 FPS on a Raspberry Pi 5 using only a CPU. Our work establishes a scalable and efficient alternative to conventional methods, making it highly suitable for mobile robotics and wearable devices.

End-to-end autonomous driving requires generalization ability across platforms with dissimilar physical characteristics. The chassis defines the physical embodiment of each platform, and real-world fleets span sub-tonne microcars to bus-class vehicles. Consequently, the driving stack must either be retrained per platform or adapt to the underlying chassis dynamics online. World model (WM)-based reinforcement learning offers a sample-efficient path toward end-to-end autonomous driving on egocentric bird's-eye-view (BEV) representations, but its effectiveness hinges on how faithfully the WM captures the ego vehicle's dynamics. This work identifies a structural bottleneck in BEV-based WMs: observation transitions entangle ego-motion with scene dynamics, consuming modeling capacity at the cost of imagination accuracy. This burden is embodiment-dependent: dissimilar chassis produce different observation warps under the same control input. The proposed DynaDreamer addresses this bottleneck by conditioning the WM's latent distributions on a physics-informed ego-dynamics context derived from a lateral dynamics model with a neural tire force formulation. This context is extracted online via a neural-ODE encoder-decoder that simultaneously identifies the underlying chassis parameters. Information-theoretic analysis confirms that this conditioning removes the ego-motion terms from both the WM's transition entropy and its prior-posterior KL divergence. The identified physical parameterization enables zero-shot cross-embodiment adaptation across a dynamically diverse fleet without per-platform retraining. Simulation results show 28% and 43% improvements in driving task success rates over the strongest baseline in urban and highway scenarios, and the advantage over the base Transformer WM reaches up to 73% when extrapolating to unseen chassis.

Event cameras are increasingly adopted in embodied perception for their microsecond temporal resolution, high dynamic range, and resilience to motion blur. However, training event-based models for robotics requires large-scale, action-conditioned data with dense physical annotations that are difficult to collect in the real world. We introduce EVIS, an open-source physics-grounded event simulator integrated into NVIDIA Isaac Sim that generates events from linear-HDR radiance from a closed-loop robot training episode. Rather than relying on learning-based video interpolation or expensive dense rendering, EVIS exploits renderer-provided motion vectors and depth maps through bi-directional warping and depth-based splatting. This enables high throughput, real-time, and high-fidelity event generation. We evaluate EVIS across runtime efficiency, sim-to-real transfer, and zero-shot model compatibility. A rotation-speed estimator trained solely on EVIS events achieves 2.75 rad/s MAE on real sensor data. Pretrained models for reconstruction, matching, and tracking perform competitively on EVIS events without any fine-tuning. EVIS sustains real-time generation across GPU-parallel environments on a single GPU. Code repository: https://github.com/spikelab-jhu/isaac-sim-event-camera-plugin.