Motion Understanding and Generation

Recent advances in physics-grounded video generation leverage physics simulation as a physical prior to guide video synthesis toward physically plausible outcomes. The simulation process is controlled by physical specifications, which are typically generated by a vision-language model in a single pass. Such one-shot prediction often fails to accurately translate user intent into executable simulations, particularly for fine-grained object dynamics, complex motion trajectories, and temporally structured interactions. In this paper, we propose PhysAgent, a reflective agentic framework that closes the loop among physical program generation, physics simulation, stage-specific verification, and targeted program repair. Beyond improving the control of coupled physical parameters, our framework enables the agent to progressively realize complex trajectories, multi-stage interactions, and precise event outcomes by treating each physical program as an executable hypothesis. In addition, we design a set of physics-control APIs to support more stable and complex motion behaviors. Extensive experiments demonstrate that PhysAgent produces more physically plausible videos, achieves better prompt alignment, and generalizes more effectively across diverse physical scenarios.

Sign language production, which generates continuous 3D skeletal motion from spoken language input, must simultaneously satisfy two constraints: semantic fidelity, so that a deaf viewer can recognize the intended sequence of glosses, and biomechanical plausibility, so that the generated skeleton respects anatomical constraints. Existing approaches optimize semantic reconstruction through coordinate-based objectives that treat the skeleton as an unstructured vector, thus allowing for bone length drift, joint angle violations, and temporarily locked fingers. We introduce PIDiffSign, a physics-informed diffusion model for gloss-to-pose translation that incorporates anatomical constraints into both the architecture and training objective. The model uses a Transformer encoder-decoder, where the decoder is conditioned on the diffusion time step through adaptive zero-initialized layer normalization and cross-attends to gloss representations. A differentiable geometry module enforces bone length consistency and biologically valid joint angles throughout generation. Training combines anthropomorphic, kinematic, angular, and finger-joint constraints with a contrastive gloss-pose alignment loss and classifier-free guidance for semantically conditioned sampling. Experiments on the PHOENIX14T and CSL-Daily benchmarks show consistent improvements over a strong diffusion baseline in pose accuracy, joint-angle correctness, distributional realism, and back-translation quality. These results demonstrate that physics-informed diffusion improves both motion realism and semantic fidelity for sign language generation.

End-to-end trajectory planners need to represent multiple plausible driving behaviors while producing a single executable trajectory under real-time constraints. Proposal-based approaches address this ambiguity by generating multiple candidates, but converting the proposal set into a final plan remains a key design problem. We present DRIFT, a fixed-depth planner that combines one-step drifting in a compact trajectory latent space with scene-aware proposal aggregation. Conditioned on features from a pretrained visual encoder, the DRIFT Decoder generates 48 proposal features in a single batched pass, with 32 samples at alpha=0.5 and 16 samples at alpha=0.9. A lightweight Aggregation Head integrates these features with scene, navigation, and ego-state information and directly predicts the final trajectory without requiring trajectory-level quality labels for aggregation. Its output is trained with expert-trajectory imitation and a map-derived boundary regularizer that penalizes waypoints outside the drivable polygon and inside waypoints near its boundary. On NAVSIM navtest, DRIFT achieves 89.6 PDMS and 90.4 EPDMS, with strong drivable-area compliance and ego progress among the methods compared. The proposal-generation and aggregation module runs in 10.82 ms on an NVIDIA RTX 4090, while full-model inference including the visual backbone takes 66.43 ms. These results show that one-step latent proposal generation and direct aggregation provide an efficient design for multi-hypothesis motion planning.

In recent years Flow Matching has become a prominent method for generative modeling robot motion generation. In its generic form Flow Matching is an ODE-based neural sampler that is trained by regressing empirical flow fields associated with motion samples as data. However, in robot motion generation we often have additional constraints that might not be present in the collected data. The majority of current approaches train the flow on the available data and use inference-time guidance to enforce task-specific constraints. To address this mismatch, we propose \textbf{ConFlow}, a constraint-guided flow matching framework that incorporates constraint information directly into the training objective via differentiable barrier or cost functions. To address design specifications such as smoothness and boundary conditions, we propose replacing the standard Gaussian source distribution used in flow matching training with a conditional Gaussian Process. Our approach also uses infeasible demonstrations as negative supervision, improving constraint satisfaction without requiring additional expert data. Experiments on a two-robot navigation task demonstrate that ConFlow achieves lower collision rates and higher trajectory quality than standard flow matching baselines, with or without inference-time guidance. These results validate training-time constraint integration as an effective approach to closing the training--inference gap in generative motion models.

Multi-robot-arm motion planning is a key challenge in deploying multiple manipulators for industrial tasks such as manufacturing. Existing search-based and sampling-based solvers often require significant computation time to produce collision-free, high-quality motions suitable for safe real-world execution. In this work, we introduce a new suite of multi-robot-arm motion planners capable of near real-time motion generation, combining classical planning algorithms with state-of-the-art vectorized collision-checking techniques. Based on CPU SIMD instructions, our new planners accelerate their primary bottleneck, collision checking, and achieve up to two orders of magnitude speedup in both motion planning and execution postprocessing for multi-arm manipulation tasks. We also release our implementation to lower the barrier for research and development of multi-robot-arm planning and manipulation problems. Code is available at https://vamp-mr.github.io/vamp-mr

Humans recognize movements effortlessly, even from noisy and complex visual input. But what information in the stimulus allows humans to rapidly classify movements? No framework has systematically compared different strategies of movement analysis to address this question. Here, we used videos of 16 daily activities from the MoVi dataset and compared three strategies: Temporal Movement Primitives (TMPs), which decompose movements into weighted sums of temporally smooth basis functions; Legendre polynomial coefficients, which project joint-coordinate trajectories onto an orthogonal polynomial basis; and Autoencoder latent embeddings. Legendre coefficients and TMPs achieved the highest classifier accuracy, followed by autoencoders. We found two discriminative features for movement classification. The most informative is the general posture of the body, the average spatial configuration that distinguishes one activity from another. Additionally, we identified 9 critical joints that are most predictive for movement classification. Interestingly, good classification accuracy did not automatically lead to good movement generation: when we reconstructed movements for each activity, TMPs preserved the temporal dynamics and produced perceptually natural motion, whereas reconstructions from Legendre coefficients retained only the average posture and appeared frozen. These results reveal a dissociation in how movement information is organized: the static configuration of the body suffices to classify what activity is performed, but the temporal dynamics of movement are required to reconstruct how it unfolds. This distinction clarifies which features the visual system may rely upon for rapid action recognition, and suggests that postural features could enable efficient movement screening in clinical applications, while dynamic information remain essential wherever movement generation is the goal.

Robot motion planning is inherently multimodal, yet classical planners typically return only a single solution. Probabilistic formulations address this limitation by maintaining a distribution over motions, allowing the planner to reason over multiple low-cost alternatives. In robotics, however, motion samples must also satisfy strict constraints, including collision avoidance, joint limits, contact conditions, and dynamics consistency. These hard requirements make motion sampling substantially more challenging: within a limited planning budget, the ensemble must cover diverse low-cost motions while ensuring that every sample remains feasible under the relevant constraints. We propose SteinSQP (Stein Variational Sequential Quadratic Programming), a constrained Stein variational inference method for diverse feasible robot motion sampling. SteinSQP evolves an interacting particle ensemble, as in Stein variational methods, while embedding constraints directly into a kernel-space SQP subproblem. We solve the resulting constrained Stein-Newton subproblem with a GPU-friendly matrix-free primal-dual algorithm, enabling efficient batched ensemble updates. To globalize the method, we introduce an ensemble-level merit function that jointly balances objective value, constraint violation, and particle diversity. Across five constrained motion-planning tasks, SteinSQP returns fully feasible ensembles while preserving diverse motion alternatives. Compared with first-order constrained Stein baselines and serial multistart nonlinear programming, SteinSQP shows faster and more robust ensemble convergence in terms of iterations, improves particle-wise feasibility, and achieves faster batched time-to-solution on challenging robot-scale tasks.

This paper studies motion estimation of moving energy emitters using passive sensors. The emitters may be light, acoustic, or radio sources. While the bearing vector pointing from the sensor to the emitter can be easily obtained, existing approaches mainly rely on the bearing-only motion estimation method. However, this method suffers from a fundamental limitation that the sensor must have lateral motion to ensure observability. Unfortunately, this lateral motion requirement often conflicts with the sensor's desired motion in many tasks. In this paper, we point out that the received signal strength, which can also be obtained easily in many ways, can greatly enhance motion estimation. Surprisingly, this strength information has not been well explored so far. Here, we propose a new bearing-strength method to fully exploit both the bearing and strength measurements. Our theoretical analysis shows that the system observability is significantly enhanced in the sense that the lateral motion condition is not required anymore. Real-world experimental results verify the proposed method and the theoretical analysis. It is notable that the benefit of the proposed method comes with no additional cost since it simply utilizes the received strength information that has not been fully exploited in the past.

Recent 4D Gaussian Splatting (4DGS) methods often fail under fast motion with large inter-frame displacements, where Gaussian attributes are poorly learned during training, and fast-moving objects are often lost from the reconstruction. In this work, we introduce Spatiotemporal Position Implicit Network for 4DGS, coined SPIN-4DGS, which learns Gaussian attributes from explicitly collected spatiotemporal positions rather than modeling temporal displacements, thereby enabling more faithful splatting under fast motions with large inter-frame displacements. To avoid the heavy memory overhead of explicitly optimizing attributes across all spatiotemporal positions, we instead predict them with a lightweight feed-forward network trained under a rasterization-based reconstruction loss. Consequently, SPIN-4DGS learns shared representations across Gaussians, effectively capturing spatiotemporal consistency and enabling stable high-quality Gaussian splatting even under challenging motions. Across extensive experiments, SPIN-4DGS consistently achieves higher fidelity under large displacements, with clear improvements in PSNR and SSIM on challenging sports scenes from the CMU Panoptic dataset. For example, SPIN-4DGS notably outperforms the strongest baseline, D3DGS, by achieving +1.83 higher PSNR on the Basketball scene.

This work explores the motion transfer from one video to another, which is crucial in animation for diverse characters. Previously, video motion transfer has been largely explored between human and human-like characters, enabling a lot of applications in digital creation. However, these approaches encounter a main limitation. Specifically, related technical pipelines heavily rely on a predefined human skeleton structure and accordingly require skeleton-conditional model training. On the one hand, these methods are difficult to generalize to diverse characters, such as animals from different species, while preserving their unique motion styles. On the other hand, labeled data in diverse skeletons is limited, which additionally restricts the large-scale training for the task. In this paper, we jump out of the skeleton-based motion transfer framework and propose a training-free motion transfer framework, named Motion4Motion. Motion4Motionmodels the motion flow of the character in a video instead of skeletons, which makes motion transfer across species easier. Extensive experimental results and novel applications show our methods outperform baselines impressively. Project page is available at https://lhchen.top/Motion4Motion.

Diffusion Transformers (DiTs) have advanced video generation with high-quality, temporally coherent results. However, extending them to motion transfer, which requires following reference motion while aligning with a target prompt, remains challenging due to limited understanding of motion and structure representations within DiTs. We analyze video DiTs at the attention-head level and identify distinct heads specialized for motion and spatial structure. Based on this insight, we propose a head-aware controllable motion transfer framework that requires no parameter updates. Our method refines motion cues from motion-specialized heads via semantic correspondence guidance and preserves structure through selective feature injection. This head-level control not only enables accurate motion transfer but also provides an interpretable foundation for controllable video generation with DiTs.

For close-contact human-robot interaction (HRI), trunk-like continuum manipulators provide a physical channel for diverse whole-body expression, but grounding open-vocabulary responses into such robots is difficult: end-effector motion underspecifies body shape, whereas direct whole-body commands are high-dimensional and hard to keep feasible. We propose a whole-body semantic-to-actuation grounding framework for elephant-inspired soft-trunk HRI based on lightweight flow matching. The framework converts responses from a multimodal large language model into bounded, morphology-aligned intent-intensity tuples, parameterizes tendon-actuation trajectories with compact Catmull-Rom spline controls, and uses a rectified-flow generator to sample feasible whole-body trunk motions. Experiments show that the proposed framework improves held-out grounding correctness from 25.0% to 77.2% over a raw-response dense-regression baseline. Compared with a denoising-diffusion baseline, it improves correctness from 71.9% to 77.2% and reduces inference time from 7.86 ms to 4.87 ms while preserving motion diversity. A 100-participant physical HRI study further shows that adding the generated soft-trunk motion channel increases the positive overall-satisfaction rating from 46% to 82% over the audiovisual-only baseline.

Existing Stochastic 3D Human Motion Prediction models are fundamentally constrained by hard-coding the skeleton kinematics, severely limiting generalization, preventing cross-dataset training, and requiring complex data retargeting. We introduce EquiFusion, the first kinematics-agnostic model to solve this bottleneck, implementing a latent diffusion model with a permutation equivariant architecture. EquiFusion treats the kinematics' connectivity as an explicit input parameter, ensuring its internal computations are inherently agnostic to joint ordering and graph structure. This novel design enables truly cross-dataset generalization to unseen kinematics and unlocks novel zero-shot directions, such as motion prediction from partial or occluded observations and targeted limb generation. EquiFusion achieves state-of-the-art results on major benchmarks, being up to 75% more compact than previous kinematics-specific methods, while achieving faster training and inference. EquiFusion thus establishes a new, flexible standard for robust human motion prediction. Model and training code are available at https://ceveloper.github.io/publications/equifusion/.

End-to-end motion planning has emerged as a promising paradigm in autonomous driving, directly mapping raw sensor data to control commands via deep neural networks. Despite its advantages, its large model size hinders deployment in resource-constrained platforms. In this paper, we present BucketKD, a bucket-based knowledge distillation framework that yields compact and safety-aware end-to-end planners. Compared to the state-of-the-art approach, which relies on simplified planning state representations, BucketKD discretizes critical environmental variables into adaptive buckets that capture richer scene semantics while preserving efficiency. In addition, we design a safety-aware waypoint attention mechanism that evaluates each waypoint's risk level by accounting for both obstacle proximity and relative motion through a time-to-collision (TTC) formulation widely used in transportation research. This enables the student model to better retain safety-critical behaviors during distillation. Extensive experiments in CARLA using the Bench2Drive dataset show that BucketKD significantly outperforms the state-of-the-art in both planning accuracy and safety while maintaining strong compression ratios.

Motion blending in character animation enables the synthesis of new motions by interpolating between existing examples. Current methods are typically restricted to fixed skeleton topologies, requiring identical or near-identical skeletal structures across characters. We present a novel framework for motion blending across heterogeneous skeletons. The proposed architecture combines a semantic encoder, which extracts per-frame latent representations of the motion state, with a diffusion-based decoder, which reconstructs character-specific motion conditioned on this latent code. At inference, blended motions are obtained by interpolating the latent representations of two input motions. We train and evaluate the method on the Truebones Zoo dataset using motions defined on both same and distinct skeleton topologies, demonstrating the ability to achieve smooth and plausible blending in a variety of scenarios.

Motion and emotion are core parts of intelligent, expressive behavior. In this paper, we introduce fog, a function composition framework for implementing and compose motion functions. We demonstrate how fog can be used to express motion and emotion in Heider-Simmel style animations. This code generation framework can help users generate functions for verbs, adverbs, gestures, and emotions to create an open-ended motion vocabulary. It is complemented by an animation editor that helps users refine motion through direct manipulation and dynamically generated UI. We evaluate our approach with a perceptual evaluation, where we test 452 fog-generated animations to see if people can recognize the semantic meaning of the motion. We find that fog's motion functions can be recognized at 68% accuracy, a 2.68x improvement over a chance baseline. In a mixed-methods user study with professionals and novices, we show that fog in interface form can support users with more rapid iteration, exploration, and control.

While closed-loop motion planners trained on large-scale, object-level datasets, e.g., nuPlan, demonstrate strong in-distribution (ID) performance, their generalization to novel urban topologies and recovery mechanisms following execution perturbations remain under-explored. To address this, we present Shift & Drift, a novel dual-track benchmark designed to rigorously stress-test motion planners across two critical axes of distribution shift: (1) The Semantic Shift Track leverages a novel conversion pipeline that transforms the aerial, DeepScenario Open 3D dataset into the nuPlan simulation framework. This enables zero-shot evaluation of planners trained on North American and Singaporean data against 1,182 scenarios spanning four German cities and the US city of San Francisco featuring dense pedestrian-cyclist interactions. (2) The State-Distribution Drift Track injects stochastic perturbations into the ego vehicle's dynamics to quantify robustness against compounding execution errors. Based on this, we systematically evaluate the failure modes of diverse planning paradigms under semantic and state-distribution shifts. While imitation learning methods achieve high scores in ID benchmarks, they exhibit significant failures under semantic shift, particularly in pedestrian-dense environments, and suffer from persistent drift when subjected to temporally correlated actuation noise. In contrast, the evaluated reinforcement-learning-based planner demonstrates more graceful degradation, maintaining higher safety and progress metrics across both tracks. Our findings reveal an empirical trade-off between imitation fidelity and closed-loop resilience, providing the community with a rigorous benchmark to evaluate progress toward reliable deployment.

Nonverbal communication through head and neck movement is fundamental to human social signalling, yet how robotic neck morphology translates motion into communicative information remains poorly understood. We present an information-theoretic framework characterising robot neck movement as a communication channel, quantifying information transmitted and energy expended across varied configurations. Using a robotic neck platform, we recorded 84 video stimuli spanning three rotational degrees of freedom (DoF), varying amplitude, acceleration, and frequency, measuring Shannon entropy of pixel-change signals alongside energy consumption. A perceptual study validated communicative interpretations of each motion. While humans typically engage one axis per gesture, robots are unconstrained by biological architecture, motivating tests up to 3 DoF. Yet communicative information peaks at two DoF and decreases at three despite rising energy cost, a phenomenon we term the morphological information bottleneck. Motion parameter effects were parameter-dependent, some additive, others non-linear. We introduce the Motor Information Space, a framework mapping entropy against energy to expose communicative efficiency across morphologies, in which the optimal configuration achieves 5.26 bits at competitive energy cost. Perception data further confirm multi-axis movements reduce clarity. These findings challenge the assumption that anatomical completeness improves robotic expressiveness, establishing a quantitative basis for morphological design in robots, especially humanoids.

The modern-day surge in popularity of wearable devices poses a fundamentally unique motion capture problem: reconstructing full-body movement from any set of sensing hardware worn at a given moment. Yet, most research efforts assume fixed sensor configurations (e.g. IMU suits or HMD-centric rigs) and cannot generalize across them. In contrast, we argue that motion capture should prioritize unobtrusive and lightweight devices such as smartphones, smartwatches, smart glasses, and smart insoles, and study the interplay between them. To this end, we make three contributions. First, we present a large-scale multi-modal dataset synchronizing these consumer-grade sensors with ground-truth 3D motion, spanning 50 diverse activities including everyday tasks, sports, and social interactions. Second, we propose WHIP, a baseline generative model that reconstructs motion from arbitrary subsets of available sensors, robustly handling missing modalities and producing physically plausible motions. Third, we conduct a systematic study of sensor complementarity, quantifying how different modalities complement one another. Code and dataset are available at https://vcai.mpi-inf.mpg.de/projects/WHIP/

Underwater robots often operate near delicate targets where high-power thrusters resuspend sediments and induce turbulence, degrading image quality at the sensor input. Conventional controllers optimize vehicle-centric objectives, such as tracking and stability, without accounting for the impact of actuation on sensing. We address this actuation-to-perception coupling by exploiting redundancy in over-actuated platforms. For an eight-thruster ROV, multiple thrust allocations can yield the same motion; we search this null space to minimize predicted disturbance in a task-relevant target region while enforcing motion constraints. Our method uses a control-oriented thruster-wake proxy derived from actuator-disk theory with directional attenuation and validated by PIV ($R^2 = 0.99$ near the wake axis; $R^2 > 0.82$ in the primary wake region), together with a real-time redundancy-resolving allocator running at 10 Hz (45 ms/solve). Across 440 trials, the approach reduces target-region particle velocity by 67% ($p < 0.001$), improves 3D reconstruction RMSE by 55% versus a disturbance-unaware baseline ($1.9 \pm 0.4$ mm vs. $4.3 \pm 1.8$ mm), and achieves a 98.5% reconstruction success rate. The framework supports autonomous scanning, which is quantitatively evaluated, and operator-assisted inspection, which is demonstrated in the supplementary materials.

Compositionality, by organizing complex behavior as combinations of simpler elements, enables robot learning that is scalable and data efficient. Leveraging this principle, we propose a generative learning-from-demonstration framework that enables compositional modeling of robotic behavior by connecting perception and motion through shared object-level representations. We render scenes from object-centric neural representations that integrate canonical neural fields with latent-conditioned deformations, capturing positional and geometric variations in a smooth, consistent, and interpretable way. For motion generation, a temporal mixture-of-experts (MoE) employs a gating mechanism to combine object-conditioned movement primitives over time, producing complete trajectories. This spatial-temporal compositionality maintains the data efficiency of movement primitives while grounding motion in visual structure, enabling systematic generalization across diverse scene configurations. In simulation, long-horizon manipulation tasks are successfully completed using the proposed model, which requires significantly less training data than other image-based baselines. Real-world experiments further demonstrate the method's robustness to noise, its ability to generalize at the category level through language-based segmentation models, and its capacity to operate directly on 3D scene representations.

Anticipating human motion from an egocentric perspective is fundamental for proactive assistance in AR/VR, human-robot collaboration, and embodied AI. While recent works incorporate language as a semantic prior to reduce the ill-posed nature of egocentric forecasting, they largely neglect the 3D spatial and semantic context that governs how motion unfolds, and treat pose and language prediction as separate inference streams. We introduce Ego3DLM, built on two core principles: accurate motion forecasting requires explicit spatial and semantic understanding of the 3D environment, and pose and language must be predicted holistically in a single pass, since motion is inherently tied to the semantic interpretation of actions being performed. Given three-point tracking, 3D scene features, and egocentric video, Ego3DLM simultaneously decodes past pose, future pose, past narration, and future narration in a single autoregressive pass, grounding predicted poses and descriptions in one another to enforce cross-modal and temporal consistency. We adopt a three-stage training scheme: (1) spatial-semantic scene awareness pretraining; (2) holistic instruction tuning over all four outputs in a single pass; and (3) GRPO-based reinforcement finetuning with intra- and inter-modal rewards that directly optimize pose-language fidelity. Experiments on the Nymeria benchmark demonstrate that Ego3DLM achieves state-of-the-art performance across future motion prediction, past motion tracking, and motion description, showing that 3D scene grounding and holistic cross-modal prediction yield physically plausible and semantically coherent motion forecasts. The project page is available at https://jaewoo97.github.io/Ego3DLM/.

Diffusion-based text-to-motion models synthesize realistic human motions but often exhibit semantic drift from the input text. Motion is inherently temporal, especially in compositional and long-duration sequences that require semantic consistency across multiple action segments and smooth kinematic transitions throughout the trajectory. We posit that the initial noise is central to this consistency: within the Gaussian noise space, certain instances, i.e. winning noise tickets, carry latent structure that biases denoising toward particular motion semantics, even under null prompts. We propose WInning Noise Retrieval and Optimization (WINRO), a training-free, model-agnostic framework that improves text-motion alignment by selecting and refining such tickets before diffusion sampling. WINRO maps random noises to motion features generated under null prompts, retrieves the best-aligned noise for a given text, and refines it via a KL-regularized objective that reduces the residual semantic gap while preserving the Gaussian prior. An optional LoRA-based adapter amortizes this refinement into a single forward pass. WINRO consistently improves text-motion fidelity across different base models, MDM and MotionLCM, on HumanML3D without retraining, improves temporal robustness on the MTT benchmark, and generalizes to applications such as motion stylization and spatial constraint satisfaction.

Fast and reliable motion detection is essential for machine vision and autonomous systems operating in dynamic environments. This work integrates emerging event-based sensing with biologically structured neural computation to establish an efficient computational paradigm for visual motion detection. The proposed framework is built upon a recently developed fly-inspired neural network that emulates motion-processing circuits in the optic lobe. Owing to its feed-forward and training-free architecture, the neural model requires only a small number of interpretable parameters and is well suited for real-time implementation. Event cameras provide low-latency, low-power, and high-dynamic-range visual sensing by asynchronously transmitting brightness-change events. However, their performance can be degraded by event noise, including temporal noise and junction-leakage-induced activity, particularly under low-light conditions. Moreover, effective integration between event-based visual representations and biologically inspired neural processing remains under-explored. To address these challenges, we propose an event-driven computational framework that combines time-surface encoding for front-end event representation with a fly optic-lobe-inspired neural network for foreground motion-direction estimation. A bottom-up attention mechanism is further incorporated to suppress background motion and enhance the saliency of foreground targets. The proposed method is evaluated via real-world datasets of ground-vehicle detection and compared with a baseline frame-based model and an optimization-based approach. Experimental results demonstrate that the framework effectively combines the temporal advantages of event-driven vision with the efficiency and interpretability of bio-inspired neural processing.

We address sampling-based motion planning for continuous-time stochastic systems under process and measurement uncertainty, with probabilistic guarantees on safety and performance. The robot dynamics are modeled as a continuous-time linear stochastic differential equation, while sensor measurements arrive at discrete time instants. We derive an offline hybrid belief propagation model in which the belief evolves according to continuous-time ODEs between measurements and undergoes discrete Kalman filter update jumps at measurement times. To ensure safety, we introduce a belief-barrier-function-based safety checker for segment-level probabilistic verification. This enables the planner to certify safety over entire continuous trajectory segments and detect inter-sample chance-constraint violations that are missed by conventional node-based checks. Together, these components provide a principled framework for sampling-based belief planning that accounts for both continuous-time uncertainty propagation and continuous-time safety requirements. We integrate the method with RRT and SST planners and evaluate it across multiple benchmark environments. The results show that the proposed method achieves high success rates and robust enforcement of chance constraints, including in narrow-passage scenarios where discrete-time counterparts fail due to missed inter-sample unsafe behavior.

Markerless motion capture (MMC) techniques have been widely beneficial in biomechanical analysis of human movement; however, application to complex motions of the hand lags other musculoskeletal systems. The primary goal of this study was to evaluate the performance of a biomechanical reconstruction method that implements a gradient-based optimization approach with a biomechanical model in the loop for tracking dexterous, unconstrained hand movements using MMC. Using a custom, 8-camera setup, we acquired 121 video recordings from 6 participants performing 11 different tasks that spanned 6 hand postures, 5 object manipulation tasks, and involved motion of the proximal upper limb joints. Performance of the proposed MMC pipeline was directly compared to a more commonly adopted two-stage reconstruction method that first triangulates 2D keypoints from computer vision pose estimation algorithms to 3D and then enforces biomechanical constraints by solving a constrained inverse kinematics problem. Relative performance was assessed qualitatively by visual inspection and quantitatively using a computer vision metric. Our method generated solutions for all 121 video recordings; the two-stage method did not converge for 15% of the recordings. Across the remaining videos, our method produced more biomechanically plausible hand kinematics than the two-stage method and was more robust to occlusion effects during tasks that involved objects. The relative robustness of the end-to-end method suggests that it is more effective in utilizing the available 2D digital keypoint information. Automatic and biomechanically meaningful tracking of hand kinematics during dexterous movements has the potential to support clinical evaluation, rehabilitation monitoring, and studies of human motor control.

Autonomous robots often need to move their camera before they can act: to inspect an object, reveal an occluded region, or obtain a view that responds to a user's intent. While vision-language navigation translates instructions to base motion and vision-language-action policies map instructions to manipulation actions, language-conditioned camera motion remains comparatively underexplored as a first-class action. We formulate language-conditioned camera motion generation: given a current RGB observation and a free-form natural-language intent, predict a relative target camera pose for the next observation. This task is inherently non-trivial: viewpoint changes are driven by latent perceptual intentions, and a valid motion may operate at different semantic granularity, from entering a room to looking around a corner, inspecting a visible object, or revealing an occluded detail. To model this structure, we mine multi-intention camera-motion supervision from egocentric video, pairing plausible intents and observation-gain descriptions with relative SE(3) target poses. We propose LIME, a vision-language camera-motion generator that combines an auto-regressive observation-gain output with a continuous flow-matching pose head. This design lets the model jointly predict what the next view should reveal while representing multi-hypothesis target views. Across experiments and downstream robotic tasks, we show that LIME can learn to actively choose camera poses from passive human video, turning ordinary egocentric recordings into supervision for intent-aware active perception.

Video diffusion transformers (DiTs) generate high-fidelity and temporally coherent videos, yet motion control remains implicit, primarily relying on text prompts. As a result, achieving desired motion often requires extensive prompt engineering and repeated resampling. While fine-tuning models with additional spatial prompts (e.g., bounding boxes or point trajectories) enables explicit control, it demands substantial data curation and computation, and may compromise the generative capabilities of pretrained models. Consequently, training-free motion control using such spatial prompts has been explored in U-Net-based video diffusion models, but remains largely unexplored for DiTs. We introduce QWERTY, a training-free framework that enables flexible motion control in pretrained image-to-video DiTs via user-defined object warping and optical flow. We carefully manipulate the 3D full attention of DiTs by warping the frame-invariant semantic subspace of queries. We find that the noise predicted by the query-warped DiT naturally guides the diffusion trajectory toward the desired motion, and further show that leveraging this noise as self-guidance for latent optimization improves control stability and visual quality. Experiments show that QWERTY achieves the most effective motion control among existing training-free approaches on a recent image-to-video DiT, with performance comparable to fine-tuning-based methods.

We present World from Motion, a method for generating freely renderable dynamic 3D Gaussian representations from monocular videos. Our approach conditions a video model on dense, pixel-aligned renderings that encode appearance, geometry, and 3D scene motion along both input and target camera trajectories to correct rendering artifacts and fill in missing regions from an initial reconstruction. To train this model, we construct a dataset of aligned multiview video pairs and dynamic 3DGS representations, with simulated artifacts characteristic of monocular reconstruction. At test time, we distill the model's generations, including newly observed regions and motions, back into a single consistent, high-quality dynamic 3DGS, improving both novel-view synthesis and the underlying 3D motion. Our method sets a new state of the art in 4D reconstruction and seamlessly generalizes to in-the-wild videos with large viewpoint changes and dynamic motions.

Different stages of manipulation tasks exhibit varying levels of difficulty, suggesting stage-dependent motion speeds and temporal prediction horizons. However, existing IL-based visuomotor policies typically imitate the execution speed of expert demonstrations and operate with a fixed temporal prediction horizon, limiting flexibility and overall task throughput. In this paper, we introduce AutoSpeed, a model-agnostic learning framework that enables existing visuomotor policies to predict trajectories with stage-adaptive motion speeds, without requiring speed or stage annotations. We treat future trajectories at different speeds as candidate optimization targets, evaluate each candidate using a composite cost that trades off prediction error against prediction horizon, and optimize the policy toward the minimum-cost candidate. With a fixed-length action sequence, speed modulation adjusts the effective temporal prediction horizon: simple stages are executed faster with a longer prediction horizon, whereas complex stages are executed more slowly with a shorter prediction horizon. Specifically, we implement speed modulation in the frequency domain via the discrete cosine transform (DCT), which enables smooth, non-integer speed scaling and thus preserves motion continuity. Extensive evaluations show that AutoSpeed substantially reduces task execution time while also improving success rates. Under the AutoSpeed framework, the inferred motion speeds exhibit a strong correspondence with task stages.

Controlling the motion of multiple objects in image-to-video (I2V) generation requires preserving object identities while enforcing adherence to distinct target trajectories. This becomes particularly challenging as the number of objects increases and their paths intersect or occlude one another. Existing approaches entangle multiple trajectories within a shared, dense conditioning signal, making object-level correspondence difficult to preserve in crowded scenes. We depart from this paradigm and enforce a strict, per object spatial constraint that isolates instances independently. Our method, TrajLoc, achieves this directly within the attention layers by substituting the cross-attention weights of each object token with a Gaussian heatmap centered on its target location at every frame. The same per object token interface carries trajectory and depth through a learned embedding and preserves identity by encoding first frame appearance in place of an object token. Evaluations across six datasets, featuring up to 20 simultaneously controlled objects and out of distribution real world scenes, demonstrate that our method consistently improves both visual fidelity and trajectory adherence. Applied to two architecturally distinct backbones (CogVideoX 5B and WaN 2.1 14B), our approach achieves average gains of +4.3 dB PSNR and a 51% reduction in trajectory end point error compared to the strongest baselines. Project page: https://sela-omer.github.io/traj-loc/

Safe motion planning in dynamic environments requires reasoning about the uncertainty in predicted obstacle motion without sacrificing real-time performance. Existing conformal approaches conformalize a scalar score that aggregates per-obstacle prediction errors, losing spatial coherence and scaling poorly with scene density. We instead conformalize the entire predicted distance field at once. This functional conformal prediction (FCP) framework yields a distribution-free, field-level lower bound, from which safety follows uniformly: any trajectory satisfying the resulting constraint is certified safe, independent of how the control space is sampled. The key enabler is that the residual distance field is empirically low-rank and approximately time-invariant, which makes the bound decomposable in coefficient space. An envelope is fitted offline via functional PCA and a Gaussian-mixture inductive conformal procedure, then refined online by a lightweight adaptive functional conformal (AFCP) update on a low-dimensional vector. This keeps the per-step cost largely insensitive to obstacle count and retains long-run field coverage under distribution shift. We embed the envelope as a tightened safety constraint in a sampling-based model predictive controller, FCP-MPC. On the ETH--UCY pedestrian benchmarks and a dense 3D quadrotor task with up to 280 dynamic obstacles, FCP-MPC attains a favorable balance of safety, feasibility, and efficiency, reaching goals where pointwise and egocentric conformal baselines become too conservative or too expensive, while keeping per-step computation far below online uncertainty-reasoning baselines.

Merge with Motion Vector Difference (MMVD) is a key coding tool in Versatile Video Coding for improving motion prediction accuracy. However, its exhaustive search strategy imposes a significant computational burden on the encoder. To address this issue, we propose a novel fast MMVD algorithm for the VVenC encoder based on fractional motion vector filter difference analysis. By approximating the 8-tap interpolation filter with a 2-tap filter, we derive a criterion based on spatial gradients and prediction residuals for estimating the potential gain of MMVD candidates. We further generalize this criterion to accommodate both shifted integer reference samples and 2D separable filtering. To minimize the overhead of the proposed method, we introduce implementation optimizations, including symmetric offset inference and cross-shaped downsampled dot-product computation. Compared with existing fast MMVD algorithms in VVenC, our method reduces the average MMVD search ratio from 21.07% to 11.05% and decreases the efficiency-complexity metric $η$ from 11.79 to 7.10 under the fast preset.

Deep learning methods have vastly expanded the capabilities of motion planning in robotics applications, as learning priors from large-scale data has been shown to be essential in capturing the highly complex behavior required for solving tasks such as manipulation or navigation for autonomous vehicles. At the same time, model-based planning algorithms based on search or optimization remain an essential tool due to their flexibility, efficiency, and the ability to incorporate domain knowledge via expert-designed algorithms and objective functions. We propose a new generative framework to unify these two paradigms. First, we learn an autoencoder with a high compression ratio and a latent space of hierarchically ordered, discrete-valued tokens. Leveraging both the dimensionality reduction and the hierarchical coarse-to-fine structure learned by this autoencoder, we then perform motion planning by directly searching in the latent space of tokens. This search can optimize arbitrary objective functions specified at test time, providing a large degree of flexibility while maintaining efficiency and producing realistic solutions by relying on the generative capabilities of the highly compressed autoencoder. We evaluate our method on nuPlan and the Waymo Open Motion Dataset, showing how latent space search can be used for a variety of guided behavior generation tasks, achieving strong performance for closed-loop motion planning and multi-agent guided scenario synthesis without requiring any task-specific training.

Motion-language agents must possess the bidirectional capability to both understand human movement (motion-to-text, M2T) and generate it from natural language (text-to-motion, T2M). While foundational models have achieved strong performance in static settings, autonomous agents operating in dynamic environments must continuously incorporate new motion concepts -- such as novel athletic styles or specialized gestures -- without catastrophic forgetting of previously acquired skills. We investigate the stability-plasticity trade-off in bidirectional motion-language learning under sequential task exposure. Building on a frozen large language model backbone, we introduce low-rank adaptation (LoRA) variants designed to mitigate inter-task interference. We specifically propose mixture-of-experts architectures that utilize an autoencoder-based router to select task-specific experts at inference time, so that no task-label is needed. To evaluate these methods, we establish a reproducible five-task benchmark derived from HumanML3D through semantic clustering of motion descriptions. Our experimental results demonstrate near-zero forgetting across both M2T and T2M directions while maintaining high generation and captioning quality. Furthermore, we show that hard expert selection via routing significantly outperforms soft expert blending in quality metrics, indicating that preserving expert isolation is critical for maintaining performance in our continual learning setting. Finally, we observe that a divergence between token-level accuracy and downstream generation quality may occur, highlighting the need for more comprehensive evaluation protocols in future research on lifelong motion-language agents.

Multi-Object Tracking (MOT) is a core capability for embodied perception, and panoramic cameras are attractive for embodied systems because their 360° field of view reduces blind spots and keeps surrounding targets observable for longer durations. However, panoramic MOT is not a straightforward extension of perspective MOT. In equirectangular panoramic videos, the horizontal image domain is periodic rather than Euclidean, which breaks planar motion assumptions and makes IoU-based association unreliable near the 0°/360° seam. Meanwhile, large-FoV scenes often contain more objects, stronger scale variation, and more frequent interactions, making online association particularly sensitive to unstable frame-wise depth cues. To address these issues, we propose CylindTrack, a depth-aware cylindrical tracking-by-detection framework for panoramic MOT. CylindTrack first introduces Depth-Temporal Trajectory Modeling (DTM), which promotes instance depth from an isolated frame-wise cue to a temporally filtered trajectory-level state. To improve the reliability of depth observations, we further develop Spherical Spatio-Temporal Consistency Learning (SSTC), which combines a Temporal Mixer and Spherical Geometry-aware Attention to enhance temporal coherence and panoramic geometric alignment in depth-aware representations. Finally, we design a Topology-Aware Cylindrical Motion Model (TCMM) that lifts horizontal motion into a continuous angular state space and performs seam-consistent motion prediction and association in the periodic panoramic domain. By jointly modeling trajectory-level depth consistency and panoramic topology, CylindTrack improves identity preservation and trajectory continuity in challenging panoramic scenes. The source code will be released at https://github.com/warriordby/CylindTrack.

Visual Object Tracking (VOT) and Moving Object Segmentation (MOS) are two fundamental tasks in computer vision that involve both spatial and temporal object dynamics. Existing methods rely predominantly on visual cues and thus often falter in real-world scenarios where object motions are inherently complex and nonlinear. To address this limitation, we propose SUMO, a zero-shot, training-free, unified framework integrating nonlinear dynamics with vision-based segmentation for accurate and consistent VOT and MOS. Specifically, we develop a nonlinear State Space Model (SSM) inspired by robotics principles to capture the complex object dynamics. Building on this model, we propose a Selective Unscented Filter (SUF) for accurate state estimation, which features a joint scoring mechanism and dynamically fuses multi-source predictions to identify the most plausible object state over time. Furthermore, we apply a memory selection mechanism to evaluate the reliability of memory frames. Our extensive experimental results show that SUMO achieves state-of-the-art performance on both VOT and MOS tasks.

Shared autonomy systems combine user input with autonomous assistance to help users with motor impairments control robot arms to perform everyday manipulation tasks, by inferring user goals and providing appropriate guidance. However, the robot's internal beliefs about user goals cannot be observed by users. Traditional shared autonomy systems provide assistance along efficient shortest paths toward inferred goals, but when multiple objects lie in similar directions, such assistive motion remains ambiguous and fails to reveal the specific goal identified by the robot. This creates two critical problems. First, when the robot correctly infers the goal, users continue controlling because they cannot perceive understanding from ambiguous assistive motion, wasting effort when autonomous completion would suffice. Second, when the robot misunderstands intent, users cannot quickly detect errors until assistive motion diverges significantly, requiring substantial corrective input. We address this by introducing legible motion into shared autonomy, where robot actions must both advance toward the goal and clearly reveal which goal has been inferred, enabling users to understand the robot's beliefs and adjust control accordingly. The robot modulates communication strength through confidence-aware adaptive authority allocation by providing assertive legible assistive actions when confident while increasing user authority when uncertain, transforming shared autonomy into transparent bidirectional collaboration. User studies including simulation, and physical experiments with a six-degree-of-freedom robot arm demonstrate that legible shared autonomy significantly improves users' understanding of robot beliefs and reduces user control effort compared to standard shared autonomy.

Pose histories provide the core kinematic evidence for 3D human motion prediction, but they lack explicit high-level semantic guidance. This paper introduces ZGL, a lightweight language-conditioned predictor that uses captions of the observed motion as a semantic prior while preserving a strong motion backbone as the main source of dynamics. We render only the observed poses, generate a one-sentence description with a vision-language model, encode the caption with a frozen CLIP-L text tower, and project it into a small set of conditioning tokens. These tokens are injected into a DCT-based spatial-temporal Transformer by compact crossattention adapters with zero gates: each adapter output is multiplied by a learnable gate initialized to zero, so the full network is numerically identical to the pose-only baseline at initialization and can learn to use language only when it reduces prediction error. On Human3.6M, ZGL improves overall MPJPE over representative motion-prediction baselines in our comparison. Results on CMUMocap further show that compact caption conditioning transfers to a second benchmark and provides a practical semantic cue for 3D human motion prediction.

In a changing decision problem, standard dynamic-regret analyses have often equated the cost of non-stationarity to how far loss moves. However, it is simultaneously possible for a loss sequence to travel far and retain the same optimal policy, or for a small movement in loss to force the optimal policy to change completely. Thus, the size of the movement through loss variation, transition variation, or comparator path length describe the adversary's motion, but not the cost of that motion to the control problem. For a more faithful analytic interpretation, this paper develops a normal-fan geometry for finite-horizon adversarial MDPs with fixed transitions. Occupancy measures form a polytope, and each loss vector exposes an optimal face of that polytope. Non-stationarity in rewards is therefore a path through the normal fan, where motion inside one cone leaves the optimal face unchanged, while crossing a wall may carry regret. We pose the notion of a face-crossing price, which is the minimum regret incurred by remaining on the previous optimal face under the new loss. For any learner that tracks the previous face, dynamic regret decomposes exactly into intrinsic priced face motion plus within-face selection error. The resulting theory separates consequential from harmless non-stationarity, where loss variation can be arbitrarily large at zero price, and identical one-coordinate variation can hide horizon-scale differences in regret.

Weather synthesis aims to add weather effects to input videos while preserving scene identity, structure, and motion. The key limitation of existing methods is the lack of diversity in weather appearance and effective control over weather dynamics (e.g., temporal evolution and particle motion). Most approaches rely on text prompts, which are inherently underspecified and often fail to produce detailed weather characteristics. Additionally, general-purpose video editors optimized for clean and aesthetic outputs tend to suppress heavy weather phenomena, making dense particle effects difficult to generate. To address these, we propose a Semantic-Aware, Physics-Informed, and Geometry-Grounded framework that steers an off-the-shelf video editor to synthesize diverse global appearances and detailed particle dynamics. We factorize the synthesis into three conditional signals, so that each provides a distinct and stable source of guidance: semantics specifies what the weather should look like, dynamics governs how it evolves over time, and geometry determines where it should appear in the scene. Specifically, we introduce (1) semantic-aware appearance anchoring to establish the target appearance from scene semantics and user input; (2) physics-informed dynamic simulation to generate particle effects by simulating a Gaussian-represented particle field under gravity, wind, and turbulence; and (3) geometry-grounded video synthesis to align the simulated particles with target scene geometry and synthesize the final video. Experiments demonstrate that our method produces diverse, physically and visually realistic weather effects. Furthermore, we show that our synthesized data significantly improves the robustness of autonomous driving semantic segmentation under adverse weather conditions. Project page: https://jumponthemoon.github.io/w-crafter/.

Robots deployed in safety-critical environments must execute motions that are simultaneously robust to disturbances and provably safe from collisions. Dynamic Movement Primitives (DMPs) offer inherent stability, temporal flexibility, and efficient trajectory generalization from single demonstrations, but they lack formal safety certificates. Conversely, Hamilton-Jacobi (HJ) Reachability analysis provides a principled framework for computing worst-case safety margins and forward-invariant safe sets, but classical grid-based methods suffer from the curse of dimensionality and are impractical for real-time control. This paper introduces HJ-SafeDMP, a framework that integrates DMPs with learned HJ Reachability-based safety value functions to achieve provably safe, robust, and computationally efficient robot motion. We learn a Control Barrier Value Function (CBVF) from offline demonstration data using a model-free, finite-difference HJ recursion and deploy it as a real-time safety filter via a closed-form control law that modulates the DMP output. Unlike optimization-based CBF-QP approaches, our method achieves safety filtering without online quadratic program solves, preserving the computational efficiency of DMPs. We further incorporate an expectile-based offline learning objective that avoids querying out-of-distribution actions, and a conformal prediction calibration step that provides finite-sample probabilistic safety coverage. Experimental evaluation on a 7-DOF robot manipulator demonstrates that HJ-SafeDMP achieves formal safety guarantees with orders-of-magnitude faster execution than optimization-based baselines, while maintaining the robustness and adaptability of DMPs for human-robot interaction.

Emotional body motion expressions are an essential element of non-verbal communication. Effectively conveying these expressions through technology is of utmost importance, for example, with virtual reality avatars and in social robotics. Recent advances in generative models have opened new opportunities for advancing research on emotional body motion learning. However, generating accurate emotional expression representations is challenging, given the subtlety of emotional cues, individual variability, and cultural differences. We investigate whether a generative model can implicitly learn emotional body motions directly from culturally grounded motion-capture data, without explicit emotion-motion guidance. Using a dataset of emotional performances by 49 Japanese actors, we trained a Transformer-based generative model to generate expressive motions conditioned on 13 discrete emotion labels. We evaluate the generated motions from two perspectives: (1) an LSTM-based classifier to assess recognizability by machine observers, achieving a recognition accuracy of 22.80%, and (2) a human perception study with Japanese raters to assess alignment with human affective interpretations, yielding a recognition accuracy of 24.91%. Beyond these, we evaluate the utility of generative modeling for three practical tasks: augmenting emotion recognition models, extracting representative emotion-specific motion patterns, and synthesizing smooth transitions between emotion intensities. Our findings highlight the potential of implicit, data-driven generative modeling to enhance affective computing applications and our understanding of emotion expressions.

Capturing full-body human motion with object interactions is crucial for AR/VR and robotics applications, yet it remains challenging for conventional vision-based methods due to occlusions and constrained capture volumes. Inertial measurement units (IMUs) offer a compelling alternative without line-of-sight requirements, but existing IMU-based motion capture assumes an isolated human and ignores object contacts and dynamics. To bridge this gap, we present IMU-HOI, a novel framework that jointly recovers full-body human pose and 6-DoF object trajectory from sparse IMUs on the body and object, explicitly modeling human-object interaction. Our approach first infers probabilistic hand-object contacts directly from IMU streams and uses them as a high-level signal to route between kinematic and inertial reasoning. These contact cues drive a three-stage fusion pipeline that refines human pose and root translation, and fuses hand-based forward kinematics with object-IMU integration for object motion, yielding coherent, drift-resilient trajectories for both human and object. Experiments on challenging human-object interaction scenarios demonstrate substantial accuracy gains over prior inertial motion capture methods. Moreover, IMU-HOI can be plugged into existing sparse-IMU mocap backbones with minimal changes, effectively extending the scope of purely inertial motion capture from isolated humans to full human-object interaction and joint motion estimation.

Vision-based assessment can provide convenient and cost-effective evaluation in Traditional Chinese Medicine (TCM) rehabilitation training, where action quality assessment (AQA) from computer vision offers a promising solution. Existing automatic AQA frameworks for physical therapy typically rely on skeletal data captured from a single viewpoint, which is inefficient for TCM techniques such as acupuncture or Tuina that involve dense hand self-occlusion and complex hand-object interactions. To address these challenges, we propose CME-AQA, a cross-view, multimodal vision-based assessment framework that integrates visual-pose fusion to enhance understanding of environmental context and leverages both first-person and third-person videos during training to improve inference robustness. We collected two dual-view datasets, TCM-AQA61-A (Acupuncture) and TCM-AQA61-T (Tuina), each containing synchronized first-person and third-person recordings of 61 subjects with expert annotations. Experimental results show that our approach achieves superior or comparable mean performance against competitive baselines, achieving over 10% relative improvement in weighted F1 over the best competing method on key rating tasks such as Needle Depth and Quick Needle Insertion, while also reducing mean absolute error in quantitative measures such as insertion time and manipulation frequency. Testing on a CPR dataset further demonstrates comparable performance on several posture-based criteria, suggesting applicability to related structured simulated clinical skill assessments where participant motion is central to evaluation. Overall, CME-AQA enhances assessment accuracy for structured TCM rehabilitation training and facilitates more convenient and effective training-oriented skill evaluation.

Motion feasibility prediction plays a central role in robotics, particularly in task and motion planning and manipulation. A major bottleneck for this problem in cluttered environments is that infeasible planning attempts by Sampling-based motion planners (SBMPs) can incur substantial computational cost. Also existing approaches for infeasibility certification are limited to low-dimensional configuration spaces and often assume simplified geometric environments represented by primitive objects with known parameters. We study the complementary problem of learning motion feasibility prediction directly from raw RGB-D observations for a 7-DOF manipulator operating in realistic cluttered scenes. We introduce the first large-scale benchmark for this setting, comprising 2.7M grasp feasibility labels over 88 scanned objects and 190 cluttered tabletop scenes. We benchmark three representative classifier families spanning MLP- based, volumetric-CNN, and point-cloud-based Transformer architectures under matched training conditions. Our best model, GRASPFC-PTX (a point-cloud transformer), achieves an AUROC of 0.996 on Novel objects while providing predictions significantly faster than SBMPs.

Video customization based on Text-to-Video (T2V) models aims to learn specific features from reference data to generate controllable videos. While significant strides have been made in image stylization and video motion customization, simultaneously controlling multiple concepts, such as content, style, and motion, remains a major challenge. In this work, we systematically define the task of multi-concept video customization, which requires the joint control of content, style, and motion. To facilitate research in this area, we construct a comprehensive benchmark and propose Disco-LoRA, a unified framework designed to tackle this problem by disentangling and flexibly recombining different concepts in two stages: (1) We decompose the objective into two sub-tasks: Content-Style and Content-Motion. Each sub-task is addressed using our Iterative Dual-LoRA Disentanglement Framework, which effectively disentangles distinct concepts within the data. (2) We identify layer-wise weight trends as crucial for LoRA identity, while weight magnitudes dictate composability. To harmonize these scales, we propose a Z-score-based statistical regularization that aligns weight distributions, preserving layer-wise trends while minimizing interference between different LoRAs. Extensive experiments show that Disco-LoRA excels in multi-concept video customization, effectively preserving appearance, style, and motion for controllable text-to-video generation.

Motion forecasting is essential for autonomous driving systems to enable safe decision-making and planning in complex driving scenarios. While existing predictors excel at minimizing standard displacement errors, they often overlook the adherence to lane topology of multimodal predictions, particularly for lower-probability modes. Consequently, predicted trajectories may violate physical and logical constraints, making the prediction set unreliable for safety-critical planning. In this paper, we propose LAMP (Lane-Aligned Motion Primitives), a topology-aware forecasting framework that anchors multimodal prediction to structured motion primitives aligned with lane topology. Specifically, we use a VQ-VAE to learn shape-aware motion primitives as discrete intention queries, capturing spatiotemporal patterns beyond endpoint-based intentions. We further introduce a feasibility-aware intention selector trained with a lane-topology prior for filtering unreachable intention queries, guiding the decoder to prioritize topology-consistent intentions while preserving behavioral diversity. Extensive experiments on the Argoverse 2 dataset demonstrate that LAMP achieves prediction accuracy comparable to state-of-the-art baselines while outperforming them in feasibility and diversity metrics.

This paper describes an automatic method for adjusting or tuning models of multi-agent motion. Simulating the motion of bird flocks, human crowds, vehicle traffic, and other multi-agent systems is a widely used technique. These simulations model the behavior of a single group member (bird, human, or vehicle). The group behaviors (flock, crowd, traffic) emerge from interactions between group members. These models typically have many numerical control parameters. Even if each parameter is intuitive in isolation, their interaction can be complex and nonlinear. It is challenging to determine which parameters to adjust for the desired change in group behavior. Changing one aspect of group behavior often causes other aspects to change, leading to a tedious process of incremental changes. This work takes an inverse design approach. The desired group behavior is measured with a user-defined objective(/fitness/loss) function and optimized with a genetic algorithm. The objective function used here for basic flocking rewards proper spacing with neighbors, flying near a desired speed, and avoiding obstacles. Interestingly, the vivid alignment seen in bird flocks appears to emerge from maintaining proper spacing between flockmates.

Sign language models are typically trained on datasets captured under constrained conditions, with limited viewpoint, background, and signer-identity diversity, leading to poor robustness under real-world distribution shifts. We introduce SignNet-1M, a large-scale augmented dataset spanning ASL, CSL, and German Sign Language (DGS). SignNet-1M synthesizes realistic variations along three axes: (i) novel-view rendering (rotation and zoom) via 3D Gaussian Splatting (3DGS), (ii) scene/identity editing via diffusion models for background replacement and signer substitution while preserving sign motion and linguistic content, and (iii) post-rendering augmentations that emulate capture and compression artifacts (e.g., pose/temporal perturbations and video-level corruptions) to better match in-the-wild recordings. Beyond data release, we provide a unified benchmark suite across downstream tasks (e.g., translation and recognition) and ablations that isolate each augmentation component. Experiments across backbones show that training with SignNet-1M consistently improves generalization under cross-view, cross-background, cross-identity, and post-rendering shifts, while maintaining strong in-distribution performance. The dataset, full augmentation pipeline, and benchmark are available at https://signnet.chatsign.ai/.

Controllable video generation demands independent command of the camera and the subject, yet 2D conditioning entangles them: camera- and object-induced optical flow share the same inverse-depth (1/Z) scaling and cannot be separated from image evidence alone. We first prove that this entanglement is representational, not architectural -- the 2D camera/object split is a non-identifiable inverse problem -- and therefore reframe decoupling as a question of operator design. We resolve it at the level of the attention operator. OrthoMotion routes camera motion into a geometric channel, a norm-preserving rotation of the rotary position embedding (RoPE) phase, and subject motion into a semantic channel, a gated value injection in cross-attention. Because these sub-operators are algebraically complementary -- a rotation versus a translation of the affine action on tokens -- a lightweight decoupling regularizer provably drives their response subspaces to orthogonality, so the two controls stop interfering. To our knowledge OrthoMotion is the first method to guarantee disentanglement by construction rather than hope for it to emerge. It attains state-of-the-art camera and subject accuracy at once while minimizing cross-talk, which we quantify with a new Cross-Talk Error (CTE) metric, cutting cross-talk by more than 2.4x with no loss in fidelity and generalizing across backbones.

This paper presents "PenduMorph", a wireless reconfigurable rolling spherical robot designed as a modular platform for enclosed locomotion and inter-module interaction in challenging environments. The proposed robot extends our previous pendulum-actuated rolling disk concept to a fully enclosed spherical architecture integrating a 2-DoF internal pendulum, onboard control, battery-powered operation, and magnetic docking. The design aims to combine independent rolling mobility with protected hardware and reliable reconfigurability. We first present the robot design and an analytical study of the magnetic coupling mechanism to evaluate retention and interaction between coupled modules. We then experimentally investigate key motion behaviors at both the single-module and dual-module levels, including independent rolling, magnetic coupling, and coordinated coupled motion. The results show that the proposed platform enables stable wireless operation and a set of distinctive reconfigurable rolling behaviors, providing a useful foundation for future modular spherical robots operating in contact-rich and demanding environments.

Human motion generation has been widely studied across diverse input modalities, text, music, and video, and recent efforts have unified these into single multimodal frameworks. However, while morphological factors such as gender and body shape are known to produce distinct kinematic signatures, no existing unified framework incorporates this into generation, treating all subjects as morphologically equivalent. We present Odoriko, the first unified multimodal motion generation framework that reflects subject bio-morphological information directly in synthesized motion output. Rather than averaging over subject variation, Odoriko generates motion that is consistent with who is moving, not just what they are asked to do, across text, music, and video conditions within a single model. When explicit morphological information is unavailable, Odoriko additionally recovers subject morphology alongside motion, unifying estimation and generation in one framework. Extensive experiments across text-to-motion, music-to-dance, and video-to-motion benchmarks demonstrate that Odoriko matches or exceeds prior specialized models on standard metrics, while enabling morphology-consistent generation that no existing unified framework supports.

In this work, we propose \methodname, an LLM-based model for fine-grained human motion understanding that represents motion as a sequence of skeletal poses with explicit timestamps for each pose. Each pose encodes body joint positions and is temporally grounded with timestamp tokens, allowing the model to reason about motion order, duration, and rhythm. To study what supervision is needed for motion-language reasoning, we construct a diverse training mixture spanning pose captioning, pose question answering, motion captioning, and motion question answering. Our ablations show that the primary gains come from the diversity of pose- and motion-level supervision, while staged training provides a smaller additional benefit. Different from previous works that rely on ground-truth 3D motion capture, our approach supports both 2D and 3D skeletal motion representations through a unified pose encoder, and can optionally incorporate video to provide contextual information. Extensive experiments on BABEL-QA, HuMMan-QA, CompMo, NTU-RGB+D, and QEVD-Coach demonstrate that our method achieves state-of-the-art performance across multiple benchmarks, highlighting the effectiveness of explicit temporal encoding and diverse pose- and motion-level supervision for fine-grained human motion understanding. Notably, even when using only 2D skeletal input, our approach surpasses previous 3D-based methods.

This paper presents an experimental study of motion planning for resilient continuum robots. In this study we mainly focused on multi-criteria decision-making, its application for path-planning algorithms, impact on the generated path and execution time. To do this, we used two well-known algorithms for path planning, namely Genetic algorithm and A star algorithm, and modified them by adding the Analytical Hierarchy Process algorithm to evaluate the quality of the paths generated. In our experiment the Analytical Hierarchy Process considers four different criteria, i.e. distance, motors damage, mechanical damage of the robot's arm and accuracy, each considered to contribute to the resilience of a continuum robot. The use of different criteria is necessary to increase the time to maintenance operations of the continuum robot. We conducted the experiments using two different simulated environments of the robot. Although we significantly simplified the robot's model and its environment, we still implemented some of the features of the environment based on the real robot prototype. In particular, one of the environments has single- as well as multi-path points, and other consists of the multi-path points only. The results show that, in contrast to A star, the performance time of Genetic algorithm does not depend on the environment's cardinality. It generates more diverse paths, which increases the robot's resilience.

Humanoid robots require co-speech motions that are not only expressive and speech-aligned, but also physically executable under embodiment constraints. Existing co-speech generation pipelines are predominantly human-centric: motions are first generated in human-body representations such as SMPL-X and subsequently retargeted to humanoid robots. In this work, we identify a fundamental embodiment gap in this paradigm, where the mismatch between human motion manifolds and humanoid embodiment constraints disrupts embodiment consistency during motion transfer and physical execution. Through extensive analysis, we show that although retargeting can preserve coarse motion semantics, it significantly compresses motion diversity and weakens prosody-motion synchronization, limiting expressive humanoid behaviors. To address this problem, we first propose IK-EER, a prosody-preserving humanoid motion curation framework that jointly optimizes kinematic feasibility and speech-motion temporal alignment during retargeting. Building upon the curated robot-native motion dataset, we further introduce PhysDrift, an embodiment-aware co-speech motion generation framework that directly predicts executable humanoid joint trajectories from speech without relying on intermediate human-body representations. Unlike conventional human-centric pipelines, PhysDrift maintains embodiment consistency throughout both training and inference while incorporating physical regularization to stabilize robot motion dynamics. Extensive experiments and real-world humanoid deployment demonstrate that embodiment-aware robot-native generation substantially improves speech-motion alignment, physical plausibility, motion smoothness, inference efficiency, and real-time interaction capability.

Large-scale human motion datasets are essential for training robust motion models for analysis, synthesis, and understanding. While marker-based motion capture provides precise data, it is costly and limited in scale and diversity. Recent advances in monocular motion capture and video-language understanding open the way to extract plausible motion from unconstrained online videos. We present a scalable pipeline for constructing in-the-wild human motion datasets. From a few keywords, the system retrieves videos, extracts 3D body and facial motion, and generates high-level textual descriptions. The pipeline is flexible, enabling targeted collection of various motions, multi-person interactions, or expressive behaviors. We demonstrate its quality by training motion reconstruction and motion generation models, showing performance comparable to models trained on traditional motion capture datasets and strong cross-dataset generalization.

Motion forecasting is central to visual intelligence: agents must anticipate how objects will move in order to plan actions, reason about physical interactions, and synthesize realistic futures. We argue that 3D points in world coordinates provide a general representation that is class-agnostic, view-stable, compact, and directly useful for downstream tasks. We formalize the task of goal-conditioned 3D point motion forecasting: given a short visual history, a set of 3D query points on an object of interest, and a language description of the intended goal, the model predicts the future 3D trajectory of each point. We introduce a full stack to study this task at scale: (1) MolmoMotion-1M is a large corpus of action-described, object-grounded 3D point trajectories annotated from 1.16M unconstrained videos; (2) PointMotionBench is a human-verified benchmark spanning 111 object categories and 61 motion types; and (3) MolmoMotion is a general motion forecasting model that supports both autoregressive coordinate prediction and flow-matching-based trajectory generation. MolmoMotion accurately predicts diverse motion patterns with different language instructions, and significantly outperforms existing motion prediction baselines on PointMotionBench. Finally, we show that the learned 3D motion prior transfers well to downstream applications: it improves training efficiency and generalization for robot manipulation, and its predicted trajectories provide effective motion guidance for generative models to synthesize videos with more realistic object motion.

Collaborative human-object interaction shows dynamic and complex movements that require mutual anticipation and continuous adjustment between participants and the shared object. Modeling such collaborative multi-human object interaction (MHOI) scenarios requires high-quality data acquisition as a foundational step; however, this is challenging due to the inherent complexity of MHOI where human-human and human-object interactions occur simultaneously. Such complexity leads to noisy MHOI captures characterized by several artifacts: contact misalignment between hands and objects, motion jitter and temporal inconsistencies in the captured sequences, and missing or incomplete finger-level articulation details. To address these challenges, we present MOCHI (MOtion Enhancement of Collaborative Human-object Interactions), a two-stage framework for enhancing noisy MHOI data. Our approach first generates physically plausible hand grasps through optimization from noisy body input, producing grasps that are both physically plausible and semantically consistent with the body pose, where these optimized grasps are extended into complete hand-object interaction sequences. Consequently, the full-body motion for all participants are refined through a diffusion-based noise optimization framework that uses single-person motion priors. During the optimization process, we introduce optimization objectives to encode human-object and human-human interaction information within these single-person priors. Experimental results demonstrate the effectiveness of our pipeline across diverse MHOI data, either acquired by existing capture methods or synthesized by generative models. We further show robustness of our system across varying numbers of participants and types of interactions, and demonstrate various applications including keyframe-based MHOI creation and data augmentation through varying object geometries.

We ask whether the representational hierarchy seen in perception, from local primitives such as edges to higher level structures such as parts and objects, can be established for motion. In humanoid control, low level actions specify immediate motor commands, while meaningful behavior is organized over longer temporal scales, including contacts, gait fragments, balance recovery, reaching, and whole body skills. We introduce MotionPyramid, a hierarchical action representation that learns such structure from motion data. Starting from a motion tracking teacher, it trains a recursive stack of latent decoders: low level latents decode to immediate full body motor commands, while higher level latents unfold through lower levels into temporally extended motion programs. After pretraining, the hierarchy is frozen and reused by downstream reinforcement learning policies as a family of action interfaces at different control resolutions. Experiments show the learned levels form a motion hierarchy: coarser interfaces improve early learning and motion regularity by constraining exploration to structured segments, while finer interfaces preserve feedback control and final task precision. Representation probes show the hierarchy supports traversal, interpolation, transition, and qualitative composition, exposing editable control handles across temporal scales. Finally, we introduce Residual Interfaces, letting a downstream policy maintain coarse, segment level, and frame level residual commands through the frozen hierarchy. Analogous to residual or skip connections in deep networks, this allows coarse motion programs and fine residual corrections to coexist within one controller. MotionPyramid shows that motion, like perception, can be organized into a reusable multi level representation, providing structured abstraction without sacrificing controllability.