Neural Control

As the number of autonomous robots continues to grow, safety becomes increasingly important. Control barrier functions (CBFs) provide a theoretically grounded framework for ensuring safety, but existing design methods often face limitations in effectiveness, scalability, or interpretability, and may result in overly conservative safe sets. In this paper, we propose \emph{VertexCBF}, a framework for learning neural CBFs in a scalable, systematic, and explainable way. We approximate the stationary Hamilton--Jacobi value function using a neural network trained via a combination of physics-informed and sparsely supervised learning. By exploiting control-affine dynamics and a convex polytope control set, under which the Hamiltonian is maximized at the control vertices, we efficiently generate supervision points via GPU-parallel vertex-restricted tree search, while a residual architecture guarantees that the learned CBF is never larger than the specified constraint function. We evaluate the method on 15 systems and compare it against relevant baselines, showing that it reliably recovers large safe sets where the baselines are conservative or fail completely. In addition, we perform a hardware experiment in which a mobile robot safely avoids pedestrians using a neural CBF trained with our method.

Animals coordinate their movements through distributed neural circuits, but soft robots still typically depend on external, centralized electronics for control. Building soft robots that operate without centralized electronic controllers while remaining responsive to their environment remains a frontier challenge in soft robotics. In this work we introduce a soft-robot control architecture inspired by leaky integrate-and-fire models of biological neural circuits. The Pneumatic neuron (Pneu-ron) is a soft actuator that unifies energy conversion, logic, and actuation in one component. Each module combines a low-boiling-point fluid (LBF), a heater, and a mechanical switch into a self-excitable unit. Boiling the LBF inflates the module and triggers excitation and inhibition of adjacent modules in a process we call "inflate-and-fire". When interconnected into excitatory-inhibitory rings, Pneu-rons generate stable, sequential oscillations whose frequency emerges from the material dynamics and environmental conditions. By harnessing the inflation of Pneu-rons for actuation these networks can drive oscillatory locomotion of soft robots. Pneu-ron networks sustain oscillation under mechanical load and thermal variations, adapting through material physics rather than computation. Dynamical modeling of these networks reveals a dimensionless bifurcation diagram that dictates the network's oscillatory behavior. Encoding logic and actuation into material-level modules presents a new avenue for adaptive, electronics controller-free, soft robots.

Large-scale industrial robot fleets share constrained physical infrastructure, making vehicle travel times dependent on safety separation, intersection access, downstream blocking, and station contention. We study this problem in overhead hoist transport (OHT) systems, a representative ceiling-mounted material-handling system used in semiconductor fabs. Static shortest-path routing cannot account for these time-varying traffic costs, whereas tabular Q-routing adapts online but learns each destination--node--action value independently, limiting information sharing across sparsely visited routing contexts and making startup behavior sensitive to inaccurate value estimates. We propose Neural Double Q-routing, which replaces destination-indexed tables with a shared state--action value network. The network is warm-started through return-to-go regression on mixed simulator-generated routing trajectories and then refined online using Double-Q updates, local congestion correction, and event-stratified structured replay. Across nine matched fleet-size--arrival-rate settings with 100, 150, and 200 OHTs, the proposed framework reduces mean completion time relative to tabular Double Q-routing by $0.8\%$--$8.8\%$. It achieves the lowest mean completion time among all compared methods in the six 150- and 200-OHT settings, whereas Dijkstra remains best in the three 100-OHT settings. Completed-task counts remain within $1\%$ of tabular Double Q-routing in eight of nine settings, and 95th-percentile completion time decreases in eight settings. In two matched startup scenarios, offline initialization increases the number of completed tasks by up to $23\%$ and reduces tail completion time by up to $15\%$.

We present a traffic-signal control interface in which a shared graph neural network assigns scores to individual traffic movements. Each junction converts these scores into its own variable-sized set of legal signal phases using a deterministic incidence matrix. Directed corridor nodes provide traffic context, while movement nodes represent controlled input-to-output paths through junctions. Typed mean aggregation produces one scalar per movement; phase definitions and signal timing remain outside the learned network. This makes graph size and junction-specific action count independent of the learned parameter shapes. PPO experiments evaluate the interface on unseen synthetic grid geometries, altered signal coverage, and five heterogeneous city graphs. The policies retained performance across unseen geometries within the synthetic grid family, while changes in signal coverage exposed sensitivity to a signal-coverage distribution shift. A single trained city-policy instance executed across all five city graphs, with heterogeneous outcomes. These results provide feasibility evidence rather than a general estimate of transfer to arbitrary road networks.

We investigate conditional invertible neural networks (cINNs) as probabilistic inverse-dynamics models for multirotor control. For a planar X8 coaxial multicopter, we learn $p(u \mid s_t, c_t)$ from an incremental nonlinear dynamic inversion (INDI) teacher using rational-quadratic spline coupling and invertible linear mixing. Open-loop reproduction reaches $R^2 = 0.944$, mean CRPS 0.0915, and log-probability-error correlation $ρ= -0.60$. Over 15 closed-loop scenarios, position RMSE matches INDI (9.7 vs. 9.5 m), with 47 percent tracking acceptably; failures separate into attitude divergence under aggressive steps and phase lag under high-frequency references, isolating command bandwidth and data coverage as dominant failure mechanisms.

Differentiable simulators have advanced policy learning and model-based control, yet actuator dynamics remain an important source of sim-to-real error. This is particularly acute on low-cost platforms, where the linear current-to-torque relation $τ= K_tI$ becomes unreliable during commanded-target tracking because of friction, hysteresis, backlash, and thermal effects. We present NeuralActuator, a neural actuator model that jointly predicts (i) a simulator-equivalent generalized-effort surrogate for trajectory propagation on low-cost servo platforms, (ii) external force with a contact-probability gate for sensorless force perception, and (iii) a motor-condition score for the supervised joint. We also introduce the Neural Actuation Dataset (NAD), collected with a twin-arm teleoperation system that records robot states and actuator telemetry together with external-force labels. The torque-surrogate head is trained through differentiable simulation from pose trajectories without direct generalized-effort labels, while the force, gate, and motor-condition heads receive direct supervision. A Transformer captures temporal dependencies while supporting real-time inference. We evaluate NeuralActuator on a 5-DoF OpenManipulator-X, a 6-DoF SO-101, and a 7-DoF Franka Emika Panda, spanning three actuator families and platforms costing approximately USD 500 to over USD 30,000. The low-cost platforms support dynamics and force evaluation, while the offline Franka experiment provides an additional payload-force-estimation benchmark. Experiments further demonstrate its application for motor condition estimation on OpenManipulator-X and improved behavior-cloning performance when NeuralActuator is used as a pretrained module.

Active flow control involves nonlinear dynamics, partial observations, and computationally expensive simulations, making controller design particularly challenging. Deep reinforcement learning (DRL) has emerged as a powerful framework for such problems, but its success typically relies on large numbers of simulator interactions and produces neural-network policies whose decision process often remains difficult to interpret. In this work, we investigate a different paradigm: instead of optimizing neural-network parameters, we use modern coding agents to search directly for explicit executable feedback laws. We introduce a constrained heuristic-learning protocol in which an agent iteratively proposes, evaluates, and revises controller implementations while interacting exclusively through the public benchmark interface. The proposed framework is evaluated on 13 active flow-control benchmarks spanning one, two, and three-dimensional problems and compared against the strongest available DRL baselines under identical simulation budgets. The discovered heuristic controllers match or outperform the best DRL policy in 10 of the 13 environments while remaining compact, interpretable, and directly inspectable. Beyond aggregate performance, the resulting controllers reveal physically meaningful feedback mechanisms, transfer successfully across more challenging configurations, and remain competitive under varying Reynolds and Rayleigh numbers, actuator counts, and observation sparsity. These results suggest that heuristic learning through coding agents constitutes a credible and complementary alternative to conventional reinforcement learning, combining competitive performance with physically interpretable controller representations. Prompts and source code are available at https://github.com/DonsetPG/fluid-heuristic-learning.

Decoding continuous three-dimensional (3D) motor imagery (MI) using non-invasive electroencephalography (EEG)-based brain--computer interfaces (BCIs) remains challenging due to signal variability and residual decoding errors. Deep learning architectures such as convolutional neural network--long short-term memory (CNN--LSTM) models can capture spatial and temporal dynamics for continuous kinematic decoding; however, systematic residual errors persist in predicted trajectories. We propose a two-stage decoding framework that applies reinforcement learning (RL) to perform residual kinematic correction on the outputs of a CNN--LSTM decoder (CNN--LSTM--RL). The RL agent is trained offline without direct EEG input and instead operates on predicted kinematic trajectories to optimize movement accuracy relative to target trajectories. Decoding performance was quantified using Pearson correlation coefficients ($r$) and Root Mean Square Errors (RMSE) along the $x, y$, and $z$ axes. Compared to CNN--LSTM applied alone, CNN--LSTM--RL improved the mean correlation from $0.5076$ to $0.7181$ ($p = 0.0005$) in 2D and from $0.6420$ to $0.7780$ ($p = 0.0059$) in VR, with relative gains of $41.5\%$ and $21.2\%$, respectively. Correspondingly, RMSE was reduced from $0.0890$ to $0.0532$ (2D, $p < 0.0001$) and from $0.0714$ to $0.0441$ (VR, $p < 0.0001$), representing relative reductions of $40.2\%$ and $38.2\%$. These findings demonstrate that this scalable framework enhances 3D BCI MI decoding by correcting kinematic errors via offline residual RL without extra neural data, advancing neurorehabilitation, prosthetics, and virtual interaction.

Implicit neural controllers (INCs) are static feedback laws that are evaluated through an algebraic fixed point {equation}; they include as special cases neural network controllers. We propose a so-called implicit representation of neural networks as a key enabling device that exposes the controller as a trainable linear interconnection closed through a known static activation map, thereby making well-posedness and Lyapunov/IQC analysis mathematically easy to handle. For finite-dimensional LTI plants, we first develop a rigorous analysis theory for a given INC, including Perron--Frobenius and norm conditions for well posedness, LMI/IQC certificates for exponential stability, and LMIs for discounted infinite-horizon quadratic performance. We then formulate synthesis as a certification-compatible heuristic search: training is carried out under explicit well-posedness constraints, implicit-differentiation formulas provide gradients, and the resulting controller is accepted only after independent post-training LMIs or regional admissibility checks are feasible. Finally, we establish constrained-control separation results: for a specific scalar unstable plant with hard actuator bounds, an INC achieves a strictly smaller discounted infinite-horizon cost than any admissible finite-order dynamic linear controller. Additional results cover quadratic state-input costs, comparison with linear static output feedback, and computable upper/lower-bound certificates. Numerical examples illustrate the mechanism and the resulting certified performance.

Neural networks can learn algorithmic input-output mappings, but trusting a learned executor requires more than a correct final answer because the state transitions that produce it are usually hidden. To make those transitions visible, we introduce a trace-supervised symbolic neural CPU, a factorized learned execution architecture that combines recurrent control, an explicit operation router over a fixed differentiable arithmetic-logic unit bank, destination-masked register writeback, complete trajectory supervision and matched fixed-point replay. The model exposes the selected operation, source and destination registers, register trajectory, memory signals and writeback semantics at every step. On the principal 16-wide benchmark, the non-quantized executor reproduces reference execution exactly, while the eight-bit quantization-simulated executor preserves the symbolic operation path through programs of 1,000 instructions. When the same execution is evaluated against a matched fixed-point replay, the residual numerical drift disappears, showing that it comes from a mismatch between continuous and low-precision reference semantics rather than from execution failure. We compare recurrent, Transformer, temporal-convolution, temporal graph-inspired and state-space controllers, and the ablations show that operation-gate supervision is necessary for an inspectable execution path. Hidden-opcode memory-pressure tasks expose the remaining limits in delayed state use and temporal binding. We also extend the interface with ValueMemory, hybrid adaptive leaky integrate-and-fire controllers, candidate-constrained symbolic control trained through behaviour cloning and actor-critic reinforcement learning, and an RV32I base-integer semantic bridge. Together, these results establish a trace-verifiable framework for interpretable, low-precision and controllable neural execution.

Existing classical control methods commonly require precise models and struggle to cope with model uncertainties and external disturbances, while end-to-end reinforcement learning (RL) approaches suffer from low sample efficiency and poor convergence. To overcome these challenges, this paper proposes a hierarchical hybrid physics-informed deep reinforcement learning (HHy-PIDRL) framework, aiming to realize high-precision, highly responsive formation control for heterogeneous multi-robot systems (HMRSs). The proposed framework contains two layers. Specifically, first, the upper layer designs an autonomous navigation policy network for Ackermann-steering leader based on the Soft Actor-Critic (SAC) deep reinforcement learning (DRL) algorithm. Second, the lower module integrates a high-fidelity physical feed-forward controller, a classical proportional-derivative (PD) controller, and an adaptive DRL residual controller to propose an effective hybrid model and DRL (HM-DRL)-based formation control policy network. Third, a unique hierarchical reward function is designed for training Omnidirectional followers, which effectively guides agents toward a refined, stable control policy. Experimental results demonstrate that, the success rate of both the upper-layer autonomous navigation policy network and the HM-DRL based formation control policy networks reach 100%. Meanwhile, ablation experiments are conducted to verify the validity and credibility of the proposed method.

Realistic traffic simulation requires agents that imitate logged behavior and can also be steered along interpretable axes. Such controllability enables engineers to isolate variables, reproduce specific edge cases, and test autonomous systems without real-world risk. We introduce Controllable Neural Variational Agents (CNeVA), a controllable simulated-agent framework that learns to infer a per-agent Gaussian behavior latent from per-channel discounted returns via a closed-form conjugate variational update, conditioning a rectified-flow trajectory generator trained on a mixed channel-mask curriculum for classifier-free guidance. To tackle scarcity in reward signals, we propose soft eligibility gates that replace hard binary thresholds with smooth exponential decay, preserving the gradient signal for near-threshold agents. On the Waymo Open Motion Dataset, CNeVA attains competitive realism on the benchmark while exposing per-channel controllability that the higher-ranked imitation models lack. Speed- and acceleration-based steering produces monotone responses without stall-induced reward hacking. Safety controllability is monotone and substantial with the introduction of soft eligibility. We manage to achieve steerable map compliance under a context-residual return measure. Furthermore, our experiment demonstrates that steering metrics must be read alongside physical-plausibility guardrails to avoid reward-hacking confounds.

While neural network control policies are powerful, their deployment on safety critical systems depends on ensuring that they obey strict constraints. Existing work often treats safety as a metric to optimize for, which competes with other performance objectives, if training converges at all. Instead, we introduce ShardNet, a neural network architecture that strictly enforces unions of polyhedral constraints by construction, using a differentiable projection layer parameterized by a classification network. The key insight is to embed safety into the neural network's structure, allowing performance to be optimized independently because formal safety guarantees are always given. In contrast with existing neural architectures that can only enforce simple convex constraints, ShardNet enables the first safe-by-construction synthesis of forward-invariant neural network controllers on closed-loop systems where safety constraints are expressed as nonconvex unions of polyhedras or learned value function level sets. To support this, we also introduce a technique to verify and train such value functions correctly as rectified linear unit (ReLU) networks, which has not previously been possible. On double integrator benchmarks drawn from the literature, ShardNet policies maintain 100% safety on verified sets and achieves significantly lower objective loss compared to existing formal methods. Furthermore, our value function training technique also produces safe sets more than 3 times larger than existing verification approaches.

NeuroEvolution of Augmenting Topologies (NEAT) is a widely used neuroevolution algorithm for learning neural network architectures and weights for control tasks. However, standard offline optimisation searches for connection strengths directly, which can scale poorly in high-dimensional weight spaces and more difficult continuous control problems. Hybrid methods that combine neuroevolution with online learning can address this challenge, but their theoretical properties remain underexplored. This paper gives the first regret analysis for a general NeuroEvolutionary Online Learning (NEOL) framework, which decouples learning into two timescales: an outer loop for architecture search and an inner loop for online weight adaptation via rewardmodulated plasticity. Under mild conditions, we prove that NEOL achieves sublinear regret. Empirically, under fixed interaction budgets on four standard control benchmarks, a NEAT-based NEOL implementation achieves higher final fitness and lower variance than pure NEAT, and is competitive with strong reinforcement learning (RL) baselines on several tasks. The results are supported byWilcoxon rank-sum tests and ablation studies. Overall, the findings show that online plasticity can improve the sample efficiency and robustness of two-timescale neuroevolution. Code is available at https://github.com/boobaa2001/NeuroEvolution Online Learning NEOL.

This work presents a transparent and reproducible benchmark study of a direct dual-network Physics-Informed Neural Network (PINN) formulation for the optimal control of a mass-spring-damper system. The classical linear-quadratic optimal control problem is solved by two independent classical methods -- Pontryagin's Minimum Principle with single shooting, and direct transcription through trapezoidal collocation -- and recast as a constrained optimization problem solved by two feedforward neural networks: a state network whose boundary conditions are enforced exactly through a composite cubic-and-mask ansatz, and an unconstrained control network. The composite loss combines the physics residual at the collocation points with a trapezoidal approximation of the cost functional, weighted by a single scalar hyperparameter. On the benchmark considered, the PINN reproduces the classical optimal cost to four significant digits, satisfies the terminal state constraints exactly by construction, and produces pointwise state and control errors that fall within the spread of the two classical references. Training is approximately two orders of magnitude slower than classical shooting on this benchmark, which is honestly reported. The contribution is methodological clarity rather than methodological novelty: the formulation and the accompanying Google Colab implementation are intended to lower the barrier to entry for practitioners exploring PINN-based optimal control without prior exposure to adjoint methods or two-point boundary value problems.

Deploying neural networks on low-power microcontrollers (MCUs) requires selecting model architectures under tight memory, latency, and energy constraints. Existing workflows often simplify this process along one or more axes: static proxy costs such as FLOPs or parameters, treating one MCU as representative, and continuous-inference tests instead of deployed sensing schedules. These assumptions can mis-rank Pareto-front candidates, miss infeasible deployments, and obscure schedule-dependent energy. We present CREST (Cross-platform Runtime Evaluation and Search Tool), a deployment-realistic hardware-in-the-loop (HIL) neural architecture search (NAS) framework for MCU sensing systems. CREST keeps the optimizer, HIL measurement boundary, logging, and replay workflow fixed while exposing workload, model family, target backend, schedule, quantization, and scoring policy as configurable axes. This makes deployment effects experimentally separable within one reusable workflow. We evaluate CREST on inertial odometry and audio classification across three Arm Cortex-M targets. For inertial odometry, measured-energy HIL search reduces median per-inference energy by 41.7% versus FLOPs-based selection and 40.8% versus memory-traffic-based selection at similar error. FLOPs-based selection also chooses infeasible deployments on memory-constrained targets. On the STM32 N657 target, continuous-inference and duty-cycled searches produce different Pareto frontiers. For audio classification, the same application-level policy selects different DS-CNN architectures on different boards, and cross-board replay changes deployment cost substantially. Overall, CREST shows that deployment-realistic MCU NAS must jointly optimize model architecture, target platform, runtime schedule, and deployment policy rather than relying only on static proxy costs or continuous-inference measurements.

Control-function instrumental variable estimators need a first-stage residual, not merely a first-stage prediction. High-capacity first stages can interpolate treatment and leave too little residual information for the outcome equation. We study Adaptive Anisotropic Instrumental Heat Flow (A-IHF), a deterministic graph-diffusion residual extractor for flexible control functions. A-IHF treats treatment as a signal on a graph of first-stage features, uses pilot diffusion to detect large treatment jumps, attenuates conductance across those jumps, and computes the generated control with a sparse graph resolvent. Its observational selection rule uses only $(Z,X)$, combining graph generalized cross-validation, roughness, residualized-treatment relevance, and graph-admissibility filtering. The analysis decomposes error into structural leakage, residual attenuation, and residualized treatment variation, yielding finite-sample bounds, graph-admissibility rates under latent piecewise-smooth geometry, and finite-path selection calibration. Across 54 synthetic benchmark cells with tuned graph, kernel, tree, boosting, series, and neural control-function baselines, guarded observational A-IHF has the lowest average structural-response MSE; the A-IHF family beats the best non-A-IHF baseline in 32 cells. Performance is strongest when the graph captures piecewise-smooth first-stage structure.

Mobile networks continue to grow in complexity and next generation networks are expected to support both increasing traffic loads and more diverse services. As network complexity rises, optimizing antenna parameters under dynamic or changing objectives becomes increasingly challenging. We propose a novel multi-agent reinforcement learning (MARL) algorithm for high-level control and orchestration of mobile networks. The Temporally Consistent Graph Q-Network (TC-GQN) algorithm learns a self-predicting representation of the whole network that is task-independent and aggregates information from all base-stations. A graph neural network is trained using a global reward function to assign coordinated local actions based on the learned encoding of the global network state. We evaluate the algorithm in a simulated environment to orchestrate an energy-saving feature across multiple sectors and multiple carriers under different quality of service (QoS) constraints. The proposed algorithm outperforms state-of-the-art graph-based baselines and a competitive rule-based controller by improving hardware sleep time while maintaining QoS. Moreover, the learned representation enables rapid adaptation to changing intents.

In this work we investigate the role of neural architectures as implicit functional priors in control problems governed by ordinary differential equations. Rather than focusing on highly complex problems, our objective is to investigate architecture-dependent effects in controlled dynamical systems within the simplest physically interpretable settings possible. In particular, we study a controlled linear RLC electrical circuit and a nonlinear Duffing-type dynamical system. Both systems are analyzed first through classical optimal-control formulations and later through PINN-based approaches. We compare different combinations of multilayer perceptrons (MLPs) and Fourier-based KAN-like architectures, and analyze their influence on the resulting controls. The numerical experiments suggest that different architectural choices systematically generate qualitatively distinct controls, even under identical governing equations, loss functionals, initial and target states, training parameters and physical constraints. Significant differences appear in the spectral structure, smoothness, energy distribution, and phase-space behavior of the learned solutions. A central observation of this work is the emergence of a functional specialization phenomenon when the neural architectures are allowed sufficient freedom to shape the structure of the learned controls. More specifically, in the systems considered here, Fourier-based architectures tend to produce trajectories with richer oscillatory content, whereas smoother low-frequency-biased architectures tend to generate more regular and energetically efficient controls. This suggests that different functional components of the control problem may be handled more efficiently by different neural architectures, leading to an implicit specialization between state representation and control generation.

Spiking Neural Networks (SNNs) coupled with neuromorphic hardware offer energy-efficient solutions for humanoid robot control. However, existing SNN-based motor control systems address bipedal locomotion and arm control in isolation, leaving integrated control of both unaddressed. We present a spiking architecture that coordinates force-based arm control and bipedal locomotion in a simulated humanoid, using the Neural Engineering Framework (NEF) and Semantic Pointer Architecture (SPA). High-level action selection between locomotor and arm control is mediated by a biologically grounded spiking basal ganglia model. We validate the system through co-simulation of Nengo, for the neural control, and Isaac Sim, demonstrating successful target reaching, continuous digit drawing, path-following locomotion, and finally, switching between walking and arm control via basal ganglia disinhibition. To our knowledge, this is the first integrated spiking controller to combine bipedal locomotion and arm control on a full-scale humanoid platform. The full spike-based implementation enables future deployment on low-power neuromorphic hardware.

While physics-informed neural networks (PINNs) have shown strong potential for process modeling, physical equations are only enforced as soft constraints during training, and thus, they do not guarantee constraint satisfaction at inference. We propose a framework, called piecewise-linear Karush--Kuhn--Tucker hard-constrained PINNs (PL-KKT-hPINNs), that strictly enforces nonlinear equality constraints through piecewise-linear projection. This extends the KKT-hPINN framewor, which exactly enforces linear equalities through the Karush--Kuhn--Tucker (KKT) conditions associated with orthogonally projecting neural network outputs onto the constraint feasible region. The method is demonstrated on a continuous stirred-tank reactor (CSTR) case study for both one and two inputs. Results show that PL-KKT-hPINN preserves predictive accuracy comparable to that of a standard neural network while achieving substantially lower constraint violations. In addition, the proposed model shows improved robustness in low-data regimes, yielding lower RMSE than the unconstrained neural network for limited training sample sizes. These results demonstrate that PL-KKT-hPINN provides a computationally efficient and physically consistent framework for surrogate modeling of nonlinear chemical engineering systems.

Multirotors are widely used in applications ranging from surveillance to precision agriculture, yet conventional designs remain limited by their under-actuation. Tilt-rotor configurations overcome this limitation by enabling full actuation. This paper investigates neural-network-based control strategies for a fully actuated tilt-rotor system with four thrust-vectoring inputs. Our work is structured in two parts. First, we deliberately present a negative result by evaluating a direct input-output control approach. In this method, multilayer perceptrons (MLPs), long short-term memory (LSTM) networks, and transformer models are trained to map system states and their desired values directly to control signals. We show that this strategy fails to stabilize the system, highlighting the inherent difficulty of applying direct input-output learning to highly unstable plants. Second, as the main contribution, we propose a neural-network-enhanced sliding mode controller (SMC). The method decomposes the system dynamics into input-independent and input-dependent components, with the former learned from a small dataset using lightweight networks, thereby reducing real-time computational demands. Moreover, the proposed method can be trained using flight logs collected from low-performance controllers, and the resulting dynamic model learned from real-world data can be used in simulation. We further compare MLP- and LSTM-based implementations under model uncertainties and external disturbances, demonstrating the robustness and effectiveness of the proposed approach; in particular, the controller with the LSTM plant dynamics predictor achieves superior performance to its MLP-based counterpart while also exhibiting lower runtime.

This paper investigates multi-degrees of freedom (DoF) joint kinematics estimation under partially observed surface electromyography (sEMG), where only a subset of task-relevant muscles can be measured due to anatomical inaccessibility or sensor constraints. A novel musculoskeletal neural network (MSK-NN) is proposed to estimate multi-DoF joint angles while simultaneously inferring activations for both measured and unmeasured muscles. MSK-NN consists of a CNN-based muscle activation estimator and an embedded MSK forward dynamics module, forming a fully differentiable architecture. Unlike existing hybrid neural frameworks that require additional biomechanical labels (e.g., muscle-tendon forces, joint torques), MSK-NN is trained without direct supervision of internal biomechanical variables. A composite physics-physiology loss is designed by incorporating a joint kinematics loss, a data-driven muscle synergy loss, and an anatomy-guided trend loss. The proposed method is evaluated on two-DoF wrist kinematics estimation across three rhythmic motions with unconstrained speed and amplitude, and one random motion. Compared with CNN, Bi-LSTM, CNN-LSTM, and PET baselines, MSK-NN achieves lower normalized root mean square error (NRMSE) and higher coefficient of determination (R2), especially for the random motion. More importantly, the optimized MSK parameters remain within physiological limits, and the estimated activation of an input-excluded muscle exhibits strong temporal agreement with its recorded sEMG envelope, demonstrating the capability of musculoskeletal (MSK)-NN to recover physiologically plausible activations.

Advances in novel materials science enable structures to function as intelligent machines by embedding memory and learning capabilities directly into materials. Our work introduces a physical adaptive material motor unit neural network,leveraging a new generation of controllable actuators composed of wood- and carbon black-based composites, sensitive to temperature and relative humidity. These material actuators are assembled into a motor unit-like structure inspired by muscle contraction trigger, forming an intelligent machine capable of dynamic shading control that can be used, for example, in buildings. The machine is governed by a neural network trained on over 350 experimental data points collected under diverse environmental conditions. By establishing a new data-aware backpropagation training, we show that the machine predicts shading responses and learns to predict appropriate behaviour incrementally as the database expands. We also demonstrate the ability of the machine to optimise configurations to achieve similar shading outputs under two distinct conditions.

Enforcing nonlinear inequality constraints in neural networks remains challenging, especially when the output is subject to many coupled constraints. Existing hard constraint methods often impose structural restrictions on the constraint set or introduce substantial computational overhead for large-scale nonlinear problems. Here, we propose DiffSlack, a differentiable projection layer for nonlinear inequality-constrained neural prediction. DiffSlack reformulates inequalities as equalities with learnable slack variables, which are predicted as part of the augmented network output and provide a data-driven warm start for damped Gauss-Newton projection. The projection layer maps raw predictions onto the augmented feasible manifold while preserving end-to-end differentiability. A two-stage curriculum further stabilizes training and improves constraint satisfaction. We evaluate DiffSlack on vehicle path planning with 200 nonlinear inequality constraints from collision avoidance, curvature limits, and waypoint spacing. Compared with existing learning-based baselines, DiffSlack achieves a higher planning success rate and stronger geometric constraint satisfaction under a comparable inference budget. Ablation studies further show that the hard projection layer reduces sensitivity to supervision quality. Closed-loop tracking in CARLA and real-world vehicle experiments confirms the executability of the generated trajectories. These results demonstrate that DiffSlack provides a practical and scalable approach to embedding hard inequality constraints into neural networks for engineering applications.

This paper proposes a Network Distributed Multi-Agent Reinforcement Learning (ND-MARL) framework for quadcopter consensus control. Compared to conventional multi-agent MARL formulations that rely on centralized planning or fully decentralized execution, ND-MARL incorporates the swarm communication graph into the decision process. Under a 2-Neighbor communication topology, each agent observes information of only two neighbors and outputs an action through a distributed policy. A high-level distributed consensus planner is trained using Multi-Agent Soft Actor-Critic (MASAC) and embedded in a hierarchical stack to generate reference target positions tracked by a low-level quadcopter controller. Results demonstrate smooth consensus trajectories and planner-tracker integration when compared to a centralized MARL controller. Most notably, the learned controller exhibits zero-shot scalability, as policies trained on a three-agent system are deployed to swarms of up to 250 agents under the same 2-Neighbor communication topology without retraining or fine-tuning, achieving consistent convergence with increasing steady-state spread at large team sizes due to sparse information propagation. These findings highlight ND-MARL as a stable framework for distributed, communication-aware quadcopter consensus control.

We propose a five-step diagnostic protocol for residual-trained neural HJB-PIDE solvers with control-dependent Lévy jumps, targeting a general failure mode of neural PDE methods: a learned solution can match headline scalar diagnostics while miscomputing an operator inside its training loss. The protocol pairs each neural solve with at least one from-scratch independent reference, decomposes the Hamiltonian into drift, diffusion, compensator, and nonlocal-integral components across a u-grid, and compares the value function and its low-order derivatives over a (t,x) grid before any argmax comparison. Applied to a standard CRRA-Merton-Variance-Gamma benchmark, it isolates a missing 1/2-mixture factor in the neural method's importance-proposal density that scaled the nonlocal integral by exactly half - a textbook signature of a constant proposal scale error, invisible to longer training, grid refinement, and truncation sweeps. With the bug corrected, four references - two finite-difference solvers with disjoint discretizations, the neural solver, and a semi-analytic scalar baseline obtained from CRRA homogeneity - agree on the optimal control to within ~2%. The constant-coefficient CRRA benchmark collapses by homogeneity to a scalar maximization, so the scalar baseline is the efficient method here; the contribution is the protocol, applicable in principle to non-homogeneous and higher-dimensional settings where neural HJB-PIDE solvers are genuinely needed. The episode is a concrete instance of a broader neural-PDE verification failure: pointwise agreement of a learned value or control can coexist with a systematically wrong nonlocal operator, so per-component and surface-level checks are needed before trusting the argmax policy.

Vision-Language-Action (VLA) models can be steered at test time by intervening on semantically meaningful internal directions, but existing methods use a fixed steering coefficient, effectively operating in open loop. This is poorly suited to embodied control, where task state and concept error evolve over time, often causing overcorrection, oscillation, and reduced task success, especially for temporal behaviors such as speed and smoothness. We propose CTRL-STEER, a closed-loop framework that replaces static intervention strength with adaptive, time-varying control signals. The key idea is to decouple representation from regulation: rather than assuming temporal concepts are directly controlled by individual neurons, we steer along motion-aligned residual directions while a feedback controller adjusts intervention magnitude online. We instantiate this framework with both PID and reinforcement learning based controllers. Experiments with a fine-tuned OpenVLA policy on four LIBERO task suites show that CTRL-STEER achieves more stable concept regulation and a better steering-task success trade-off than fixed-coefficient baselines, without modifying or retraining the base model.

As Low Earth Orbit has grown more crowded with space debris, the need for reliable and efficient debris removal solutions becomes more urgent. An active tether-net system with maneuverable units is one of the promising solutions to this problem, whose success is dependent on the robustness of the net maneuver and closing decisions. These in turn are impacted by the uncertainties attributed to i) noisy observation of the target debris state (e.g., sensing errors), and ii) imperfect simulations of the complex net dynamics and net/debris interaction behavior, over which the decision system is trained. This paper focuses on the first of these two uncertainty sources, and presents a pipeline to propagate and quantify the resulting uncertainty in the debris capture performance expressed in terms of Capture Quality Index (CQI). This quantification is uniquely performed for both an active tether-net using a fixed baseline control and one using a trained neuro-control policy to guide the net maneuver during the deployment phase. Two different uncertainty quantification (UQ) techniques, namely Sobol's variance-based sensitivity analysis and perturbation-based method are exploited. A high-fidelity simulator and a lower-fidelity surrogate-based environment are used to demonstrate trade-offs between prediction accuracy versus ease of resolving uncertainties.

Learning-based methods for synthesizing controllers have gained popularity due to their high expressiveness and strong empirical performance. However, in safety-critical scenarios such as autonomous driving, robotics, and power systems, empirical performance alone is insufficient, and formal verification of controller properties such as stability and safety is highly desirable. Unfortunately, many prior verification approaches are either tied to specific structural assumptions on the system or the certificate, making them difficult to transfer across settings, or suffer from poor scalability on higher-dimensional neural network systems. In this tutorial, we present a unified framework that aims to mitigate this gap via bridging control with the state-of-the-art neural network verifier $α,\!β$-CROWN (alpha-beta-CROWN). At its core, $α,\!β$-CROWN is a general-purpose bounding engine for nonlinear functions represented as computation graphs: given an input domain, it can produce certified bounds and explicit linear relaxation of the nonlinear function. These certified bounds are useful on their own for tasks such as reachability analysis, and they also provide the foundation for more complex routines that perform satisfiability checking and optimization. More specifically, many control problems reduce to verifying real-valued inequalities over a state domain (e.g., Lyapunov theory). Consequently, $α,\!β$-CROWN enables scalable verification of such conditions by computing tight bounds and recursively partitioning and pruning subdomains based on the bounds. Thanks to GPU parallelization, this pipeline demonstrates superior scalability on verification and optimization problems that are challenging for traditional approaches. In this tutorial, we discuss the basics of $α,\!β$-CROWN and introduce its application to various control-related tasks.

Decentralized multi-agent swarm coordination on resource-constrained edge platforms remains fundamentally bottlenecked by the exponential scaling of joint action spaces and high-latency communication overhead. This paper introduces the Swarm Policy Interference Network (SPIN) framework, an architectural paradigm that bypasses these limitations by modeling swarm topologies as a compressed tensor network. We factorize the joint policy tensors of local multi-agent cliques into Matrix Product State (MPS) chains, reducing the computational complexity of evaluation from an exponential $O(n^m)$ wall to a strictly linear $O(m \cdot n \cdot χ^2)$ constraint. To bridge local continuous spatial geometry with this discrete algebraic backend without requiring power-intensive online training loops, we introduce a decoupled, hybrid neuro-symbolic control pipeline. Local multi-layered neural networks operate as structural coordination encoders, pre-trained offline to nonlinearly map hand-engineered geometric descriptors into abstract environmental target measures. At runtime, edge agents execute instantaneous behavioral adaptations by applying the Radon-Nikodým derivative directly as a zero-shot importance-reweighting filter. We validate the framework within a discrete-time multi-agent simulation sandbox spanning tracking, decentralized dispersion/area coverage, and multi-goal coordination regimes. Qualitative telemetry demonstrates that the integrated pipeline achieves stable target-directed motion, anti-collapse spatial spreading under decentralized constraints, and structured subgroup formation across multiple targets, providing a mathematically grounded route to tractable, low-power edge swarm intelligence.

Neural network (NN) dynamics models and control policies achieve strong performance in robotics, but providing sound guarantees under uncertainty remains difficult, especially for closed-loop NN systems. Existing reachability tools provide formal over-approximations, yet are often non-differentiable, overly conservative, or too slow for modern learning and online planning pipelines. To address this, we present a parallelizable, differentiable reachability framework in JAX for continuous- and discrete-time systems with analytical and NN-based dynamics and controllers. Our framework combines Taylor-model flowpipe construction with CROWN-style linear bound propagation through a unified representation that preserves affine dependencies while supporting GPU-batched computation and automatic differentiation. Building on this reachability primitive, we develop (i) a certified training method that encourages reachability-friendly dynamics models and controllers, and (ii) a reachability-aware sampling-based MPC scheme with gradient-based refinement. Experiments on non-prehensile manipulation and quadrotor tasks, including hardware and higher-dimensional evaluations (up to 72D), demonstrate practical online planning while maintaining certified reachable-set over-approximations under bounded uncertainty.

Conflict Mitigation (ConMit) is a crucial part of intelligent network control in Open Radio Access Networks (O-RAN). In this paper, we propose a method named ACCoRD to resolve detected control conflicts in Near-Real Time RAN Intelligent Controller using a Conflict Resolution (CR) Agent with an Artificial Neural Network (ANN) trained with a reinforcement learning algorithm PPO-Clip. The implemented ANN analyzes data about the network and conflicting control decisions to infer optimal CR actions. The CR Agent gathers feedback from the network after each resolved conflict to assess its efficiency and adjust the ANN's weights during batch training. The evaluation of the proposed approach is based on simulation data. A new methodology for evaluating CR solutions is proposed. Results show that the proposed ANN-based method improves on the efficiency of rule-based approaches by significantly reducing negative network events caused by conflicting control decisions in medium and high traffic scenarios.

Deploying neural networks on microcontroller units (MCUs) is critical for edge intelligence but remains challenging due to tight memory, storage, and computation constraints. Existing approaches, such as model compression and hardware-aware neural architecture search (HW-NAS), often depend on proxy metrics, incur high search cost, and do not fully bridge the gap between architecture design and verified deployment. This paper presents AutoMCU, a feasibility-first large language model (LLM)-based multi-agent system for automated neural network customization under MCU constraints. Given natural-language task requirements and hardware specifications, AutoMCU iteratively generates structured architecture candidates, filters infeasible designs through vendor toolchain feedback before training, evaluates feasible models under a controlled protocol, and verifies deployability through backend-grounded deployment analysis. AutoMCU includes two key mechanisms: 1) hardware-in-the-loop architecture generation for early elimination of undeployable candidates under RAM and Flash constraints, and 2) state-isolated multi-agent scheduling for stable coordination of proposal, training, evaluation, and deployment stages. Experiments on CIFAR-10 and CIFAR-100 under strict MCU constraints show that AutoMCU achieves competitive accuracy while reducing customization time to about 1--2 hours, compared with hundreds of GPU hours for representative MCU-oriented HW-NAS baselines. Comparisons with ColabNAS and the LLM-based NAS method GENIUS on NAS-Bench-201 further demonstrate the effectiveness and stability of AutoMCU. Real-device deployments on multiple STM32 microcontrollers validate its practical applicability to MCU-scale edge intelligence.

In this work we present an efficient and practically implementable approach for the application of reinforcement learning (RL)-based control in chemical process systems. This is an area that has yet to widely adopt RL-based control largely due to inherent challenges in trusting RL algorithms and the time-consuming process of training reliable agents. To address these challenges, we leverage a class of RL algorithms termed Y-wise Affine Neural Network (YANN)- RL, which we have developed in our prior work (Braniff and Tian, 2025a). By strategically initializing actor and critic networks YANN-RL algorithms provide confident and interpretable starting points within control schemes. We apply this RL-based control approach to three different process engineering case studies publicly available on the PC-Gym library (Bloor et al., 2026): (i) a continuous stirred tank reactor (CSTR), (ii) a four-tank system, and (iii) a multistage extraction column. Our approach is compared to several popular RL algorithms (PPO, SAC, DDPG, and TD3) and is benchmarked against nonlinear model predictive control (NMPC). These case studies demonstrate that YANN-RL can greatly reduce the training time and data needed, can be deployed with confidence for chemical process systems, and can approach the performance of NMPC without the knowledge of a full nonlinear model.

Quadratic constraints (QCs) are widely used to characterize nonlinearities and uncertainties, but generic analytical characterizations can be conservative on bounded domains. This paper develops a framework for constructing verified quadratic characterizations of scalar relations in the two-dimensional real plane. Candidate quadratic inequalities are locally generated by solving convex quadratic programs using samples from the relation and exterior sample points. They are then verified globally using sum-of-squares certificates over an exact semialgebraic description or, in the case of nonpolynomial relations, over relaxed polynomial descriptions. The resulting verified constraints define a sound overapproximation of the scalar relations over the considered domains. These constraints are directly compatible with existing analysis frameworks based on QCs and pointwise integral quadratic constraints (IQCs) for static nonlinearities and uncertainties, and they can also be embedded in QC-based semidefinite programs for reachability and safety analysis of feedforward neural networks. For smooth activations such as $\tanh$, the method yields domain-dependent quadratic characterizations that constitute an alternative to generic sector- or slope-based descriptions. For ReLU networks, we give methods to reduce conservatism in QC-based reachability analysis of feedforward networks by exploiting dependencies between neurons and tighter local bounds. Numerical examples demonstrate improved reachability results for smooth activations, reduced conservatism for ReLU networks, and applicability beyond neural networks through an example involving saturation.

Flapping-Wing Micro Aerial Vehicles (FWMAVs) provide exceptional maneuverability and aerodynamic efficiency but pose significant challenges for onboard control due to nonlinear dynamics and stringent Size, Weight, and Power (SWaP) constraints, as exemplified by a butterfly-inspired robot less than 30 gram. To this end, we present a hierarchical neuromorphic control framework that enables fully onboard, closed-loop flight on a widely available, resource-constrained ESP32 microcontroller with a unit cost of approximately $5. Specifically, our method deploys two lightweight Spiking Neural Networks (SNNs) onboard: one for state estimation from raw sensory feedback and another for control via modulation of a Central Pattern Generator (CPG) for wing actuation. Trained by imitation learning, the system achieves stable pitch and heading angle tracking during untethered real-world flight. Experimental results further reveal that the SNN-based controller reduces latency by 36% (1059us to 680us) and power by 18% (0.033W to 0.027W) for inference compared to the conventional Artificial Neural Network (ANN) baseline, demonstrating the viability of spike-based computation without specialized hardware. To the best of our knowledge, this work constitutes the first demonstration of fully onboard neuromorphic control for autonomous flight of a FWMAV, highlighting the potential of SNNs to enable energy-efficient autonomy under stringent SWaP constraints. Visual abstract: http://bit.ly/4nI8ECY Code: https://anonymous.4open.science/r/Espikify-76E3/

Continuum robots enable dexterous manipulation in constrained environments, but require accurate and efficient models for real-time manipulation and control. Traditional physics-based models can be computationally expensive and may suffer from inaccuracies due to unmodeled effects, while current learning-based methods often generalize poorly beyond the specific robot on which they are trained. We present a formulation of surrogate modeling for tendon-driven continuum robots as an operator learning problem that maps robot design parameters and tendon actuation inputs to resulting configurations. This formulation enables a single trained model to generalize across a large class of robot designs. We develop four novel neural operator architectures--two based on Deep Operator Networks (DeepONets) and two based on Fourier Neural Operators (FNOs)--and train them on simulation data to predict robot configurations. All architectures achieve good accuracy while allowing for fast and accurate generalization across designs. Our results demonstrate that operator learning provides an effective and generalizable surrogate for continuum robot mechanics in the design space, enabling fast modeling for control, planning, and design optimization in surgical and industrial applications.

Reinforcement learning (RL) is increasingly used to improve the reasoning, coding, and tool-use capabilities of large language models, but agentic RL remains prohibitively expensive. Scaling RL to agentic LLMs requires supporting complex workloads, including multi-policy collaborative training, while efficiently using elastic, heterogeneous, and cross-region compute resources. Existing LLM RL systems support some of these capabilities, but each new extension often requires dedicated system engineering. This burden arises from trainer-centered control architectures and the lack of principled abstractions for RL system components. To address these limitations, we propose AstraFlow, a dataflow-oriented RL system that replaces conventional trainer-centered control with principled component abstractions. In AstraFlow, rollout services, dataflow management, and training are decoupled into autonomous components, enabling the system to natively support complex multi-policy agentic RL workloads and efficiently exploit diverse compute resources. We evaluate AstraFlow across math, code, search, and AgentBench workloads, showing that the same system supports multi-policy training, elastic scaling, heterogeneous cross-region execution, and composable data algorithms without system-level code changes. In multi-policy collaborative training, AstraFlow achieves comparable or better accuracy than existing RL systems while speeding up training time by 2.7x.

Reliable position and shape control in tokamak plasmas requires accurate real-time regulation of several strongly coupled shape parameters. The control vectors that disentangle these couplings, referred to as \textit{virtual circuits} (VCs), enable independent shape parameter control for a specific Grad--Shafranov (GS) equilibrium. Numerical calculation of VCs is not currently feasible in real time, therefore VCs are usually computed prior to each experiment, using a small number of reference GS equilibria sampled along the desired scenario trajectory, with each VC used to control the plasma within a preset time interval. While effective near the reference equilibrium, this approach can lead to degraded performance as the plasma departs from the reference equilibrium and/or from the desired trajectory, and it complicates the design of robust control strategies for rapidly evolving plasma configurations. In this paper, we construct neural-network-based emulators of plasma shape parameters from which VCs can be derived, to provide the MAST Upgrade (MAST-U) plasma control system with state-aware VCs in real-time. To do this, we develop an extensive library of over a million simulated GS equilibria, covering a substantial portion of the MAST-U operational space. These emulators provide differentiable functions whose gradients can be rapidly computed, enabling the derivation of accurate VCs for real-time shape control. We perform extensive verification of the emulated VCs by testing whether they disentangle the control problem. The neural-network-based approach delivers high accuracy and orthogonality across a diverse range of equilibria. This work establishes the physical validity of emulated VCs as a scalable and general alternative to schedules of precomputed VCs.

In this paper, we study grant-free, asynchronous control-to-control (C2C) communications in an indoor scenario with a shared wireless channel. Each communication node transmits command units, each consisting of a variable-length low-density parity-check (LDPC)--coded payload preceded by a start sequence and followed by a tail sequence. Due to the asynchronous nature of the access, transmissions from different nodes are not aligned over time. As a result, each receiving controller observes the superposition of multiple command units transmitted by different nodes over a receiver-defined superframe interval. Each node transmits one or more replicas of the same command unit. We propose a receiver architecture in which the detection of command unit boundaries (start/tail sequences) is carried out by a single convolutional neural network (CNN) operating directly on the received signal. We show that, while start-sequence detection must rely only on the received waveform, tail-sequence detection can additionally exploit the soft information produced by the LDPC decoder, together with channel estimates. Finally, once commands units are successfully decoded, successive interference cancellation (SIC) can be applied. Simulation results demonstrate that the receiver we propose achieves reliable packet-boundary identification and a low end-to-end packet loss rate, even under uncoordinated and high-traffic operating conditions.

Formal verification of neural control barrier functions (NCBFs) remains challenging, especially for neural networks with nonlinear activations like $\tanh$. Existing CROWN-based methods rely on conservative linear relaxations for Jacobian bounds, limiting scalability. We propose LightCROWN, which computes tighter Jacobian bounds by exploiting the analytical properties of activation functions. Experiments on nonlinear control systems including the inverted pendulum, Dubins car, and planar quadrotor demonstrate that LightCROWN improves verification success rates up to 100%, while enhancing speed and scalability. Our approach provides a generalizable improvement for CROWN-based frameworks, enabling more efficient verification of complex NCBFs. The code can be found at github.com/Autonomous-Systems-and-Control-Lab/verify-neural-CBF.

Physical neural networks (PNNs) exploit diverse physical substrates---spanning molecular, wetware, and solid-state devices---to perform embodied neural computation close to physical processes. However, their operational heterogeneity in signal modalities, timing regimes, reset requirements, calibration lifecycles, and observability prevents their integration as interchangeable execution endpoints in edge, fog, and cloud workflows. We present CP$^2$N$^2$, a substrate-aware control-plane architecture that bridges software-level orchestration and physical neural computing. CP$^2$N$^2$ introduces a three-plane model that decouples high-level orchestration, twin-state synchronisation, and substrate-specific execution under versioned Physical Neural Resource Contracts. It extends Model Context Protocol (MCP)-style discovery and invocation with explicit lifecycle management, atomic leases, telemetry freshness verification, and fail-closed safety boundaries. We evaluate a reference prototype across contrasting behavioural twins, a same-host multi-process deployment under fault injection, and the Cortical Labs SDK Simulator. In a 945-request concurrency campaign, CP$^2$N$^2$ enforces typed contention and fail-closed recovery with sub-millisecond local orchestration overhead. Furthermore, in a 160-decision Agent-to-PNN campaign with a hosted LLM planner, independent enforcement ensured that 100% of executed actions remained strictly safe, verified, and reconciled despite planner-level inconsistencies. CP$^2$N$^2$ thus provides an enforceable systems abstraction for integrating scarce, stateful physical AI substrates into agentic computing environments.

Many physical AI tasks require sequential implicit computation: at each step, boundary controls are applied, and the resulting configuration is obtained by solving an equilibrium problem. This setting arises naturally in deformable object manipulation, where even bending a deformable linear object (DLO) to a target shape can be nonlinear and multistable: identical boundary conditions may produce different configurations depending on actuation history. Unlike explicit transition models, the control-to-configuration relation is implicit and history-dependent, making long-horizon learning and control brittle; backpropagating through iterative solves is also memory- and compute-intensive. We propose Neural Control, a boundary-control framework that propagates gradients through branch-dependent sequences of equilibrium solves rather than a single fixed point. Neural Control computes trajectory-dependent proxy gradients by differentiating equilibrium conditions with an adjoint formulation, avoiding solver unrolling while keeping forward rollouts on converged equilibria. Combined with receding-horizon continuation, Neural Control re-anchors optimization to realized equilibria and mitigates basin switching. We validate Neural Control on simulated and real DLO manipulation, compare against SPSA and iCEM, and demonstrate applicability to a learned DEQ-style implicit equilibrium model.

In biomechanical systems, observable performance is often used as a proxy for underlying organization, although similar outputs may arise from different adaptive configurations. This study considers the vertical dimension of occlusion (VDO) as a constraint applied to an adaptive neuromechanical system. A single-case design in a patient with Parkinson's disease enabled repeated intra-individual gait observations under six occlusal probes. Three complementary analytical levels were examined: (i) an aggregated scalar score of observable performance, (ii) a conceptual dynamical systems framework, and (iii) an exploratory UMAP representation of 55 standardized biomechanical variables from 270 M1 observations. The revised Level 1 analysis showed that the relative ranking of OC2.5 and OC3 depended on score construction, while their scalar distributions remained close. The Level 3 embedding showed substantial overlap among all six probes and did not identify independently separated condition-specific clusters. OC2.5 and OC3 displayed limited centroid displacement but broad observation-level overlap. The principal result is therefore representational non-identifiability: neither the aggregated score nor the selected low-dimensional embedding uniquely identifies an occlusal-condition-specific system state. VDO is interpreted as a constraint parameter rather than a causal determinant. The findings are exploratory, model dependent, and non causal. They do not establish distinct physiological states, an optimal VDO, clinical thresholds, or diagnostic, predictive, mechanistic, or prescriptive validity.

We present a Spatially Embedded Evolutionary Algorithm where robot individuals exist in a physically simulated 2D environment, must navigate to encounter potential mates, and compete for survival under various spatially-aware selection pressures. Using HyperNEAT evolved neural controllers for ARIEL gecko-inspired quadrupeds in MuJoCo, we investigate how spatial structure fundamentally alters evolutionary dynamics. Our experiments show a modest 4.9% difference in peak fitness between proximity-based and random pairing possibly within stochastic variation while combining spatial parent selection with stochastic death selection produces unstable population dynamics. We discover a continuous phase transition in energy-based selection experiments, with critical zone count separating extinction-dominated and explosion-dominated regimes. Our density-dependent death selection mechanism achieves 97% completion rates but causes fitness decline, revealing a fundamental dilemma where decoupled mechanisms produce bistable dynamics, positively coupled mechanisms create counter-selection pressures, and only deterministic fitness-based selection maintains stability. These findings provide important constraints for future spatial EA design.

Tendon-Driven Continuum Robots (TDCRs) pose significant modeling and control challenges due to complex nonlinearities, such as frictional hysteresis and transmission compliance. This paper proposes a differentiable learning framework that integrates high-fidelity dynamics modeling with robust neural control. We develop a GRU-based dynamics model featuring bidirectional multi-channel connectivity and residual prediction to effectively suppress compounding errors during long-horizon auto-regressive prediction. By treating this model as a gradient bridge, an end-to-end neural control policy is optimized through backpropagation, allowing it to implicitly internalize compensation for intricate nonlinearities. Experimental validation on a physical three-section TDCR demonstrates that our framework achieves accurate tracking and superior robustness against unseen payloads, outperforming Jacobian-based methods by eliminating self-excited oscillations. For implementation details and source code, please refer to https://github.com/ZiqingZou/ContinuumControl.

While Central Pattern Generators (CPGs) and Multi-Layer Perceptrons (MLP) are widely used paradigms in robot control, few systematic studies have been performed on the relative merits of large parameter spaces. In contexts where input and output spaces are small and performance is bounded, having more parameters to optimize may actively hinder the learning process instead of empowering it. To empirically measure this, we submit a given robot morphology, with limited proprioceptive capabilities, to controller optimization under two bio-inspired paradigms (CPGs and MLPs) with evolutionary- and reinforcement- trainer protocols. By varying parameter spaces across multiple reward functions, we observe that shallow MLPs and densely connected CPGs result in better performance when compared to deeper MLPs or Actor-Critic architectures. To account for the relationship between said performance and the number of parameters, we introduce a Parameter Impact metric which demonstrates that the additional parameters required by the reinforcement technique do not translate into better performance, thus favouring evolutionary strategies.

Reinforcement learning-based control policies have been frequently demonstrated to be more effective than analytical techniques for many manipulation tasks. Commonly, these methods learn neural control policies that predict end-effector pose changes directly from observed state information. For tasks like inserting delicate connectors which induce force constraints, pose-based policies have limited explicit control over force and rely on carefully tuned low-level controllers to avoid executing damaging actions. In this work, we present hybrid position-force control policies that learn to dynamically select when to use force or position control in each control dimension. To improve learning efficiency of these policies, we introduce Mode-Aware Training for Contact Handling (MATCH) which adjusts policy action probabilities to explicitly mirror the mode selection behavior in hybrid control. We validate MATCH's learned policy effectiveness using fragile peg-in-hole tasks under extreme localization uncertainty. We find MATCH substantially outperforms pose-control policies -- solving these tasks with up to 10% higher success rates and 5x fewer peg breaks than pose-only policies under common types of state estimation error. MATCH also demonstrates data efficiency equal to pose-control policies, despite learning in a larger and more complex action space. In over 1600 sim-to-real experiments, we find MATCH succeeds twice as often as pose policies in high noise settings (33% vs.~68%) and applies ~30% less force on average compared to variable impedance policies on a Franka FR3 in laboratory conditions.

Enforcing constraint satisfaction in neural network outputs is critical for safety, reliability, and physical fidelity in many control and decision-making applications. While soft-constrained methods penalize constraint violations during training, they do not guarantee constraint adherence during inference. Other approaches guarantee constraint satisfaction via a projection layer, but often rely on the existence of a tractable projection onto the feasible set, limiting their utility in more general problem settings. Many real-world problems of interest are nonlinear and lack the special structure admitting a tractable projection, motivating the development of methods that can enforce general nonlinear constraints. To this end, we introduce HardNet++, a constraint-satisfaction method that enforces linear and nonlinear equality and inequality constraints. Our approach iteratively adjusts the network output via damped local linearizations of the constraints. Each iteration is differentiable, admitting an end-to-end training framework, where the constraint satisfaction layer is active during training. We show that under certain regularity conditions, this procedure enforces nonlinear constraint satisfaction to arbitrary tolerance. Finally, we demonstrate tight constraint adherence without loss of optimality in a learning-for-optimization context, where we apply this method to a nonlinear model predictive control problem.

The prevailing paradigm in AI for physical systems: scaling general-purpose foundation models toward universal multimodal reasoning, confronts a barrier at the control interface. Frontier vision-language models achieve only 50-53% accuracy on basic quantitative physics tasks, behaving as approximate guessers that preserve semantic plausibility while violating physical constraints. Safety-critical control demands outcome-space guarantees over executed actions, not parameter-space imitation. Here we present a pathway toward domain-specific foundation models through compact language models operating as Agentic Physical AI: policy optimization driven by physics-based simulator validation rather than perceptual inference. We train a 360M-parameter model on synthetic nuclear reactor scenarios scaled from 10^3 to 10^5 examples. Scaling produces strong, regime-dependent reliability gains under nominal simulated conditions, with variance collapse of approximately 500x and elimination of >10% terminal-power excursions on the sampled distribution. Despite balanced exposure to four actuation families, the model concentrates 95% of runtime execution on a single-bank strategy, without reinforcement learning or reward engineering. Representations transfer across simulators without architectural change. We position the system as a candidate decision component within a verification, monitoring, and defense-in-depth architecture, not as a stand-alone safety solution: the demonstrated behavior speaks to closed-loop reliability on a single-step task in simulation and does not yet address off-nominal operation, sensor faults, or uncertainty quantification.

We propose a framework for training neural network controllers with certified robust forward invariant polytopes. First, we parameterize a family of lifted control systems in a higher dimensional space, where the original neural controlled system evolves on an invariant subspace of each lifted system. We use interval analysis and neural network verifiers to further construct a family of lifted embedding systems, carefully capturing the knowledge of this invariant subspace. If the vector field of any lifted embedding system satisfies a sign constraint at a single point, then a certain convex polytope of the original system is robustly forward invariant. Treating the neural network controller and the lifted system parameters as variables, we propose an algorithm to train controllers with certified forward invariant polytopes in the closed-loop control system. Through two examples, we demonstrate how the simplicity of the sign constraint allows our approach to scale with system dimension to over $50$ states, and outperform state-of-the-art Lyapunov-based sampling approaches in runtime.

We analyze a neural semi-discrete method for high-dimensional first-order Hamilton-Jacobi-Bellman (HJB) equations with known or learned dynamics. Centered differences and an artificial viscosity $Nh=O(h)$ define a monotone operator evaluated through $2d+1$ shifted network queries; policy iteration solves the resulting Bellman equation without a tensor grid. At fixed $h$, the sharp componentwise condition $\max_i|f_i|\le2N$ turns every frozen-policy operator into a nearest-neighbor Markov-chain generator with a policy-independent total jump rate. Uniformization gives whole-space well-posedness for measurable feedbacks, an explicit Poisson-tail bound on the numerical domain of dependence, and boundary-free localization. The representation also yields a posteriori policy-evaluation bounds that account for residual and learned-model errors. A greedy-gap analysis controls inexact policy iteration at fixed $h$; a separate consistency estimate connects the semi-discrete equation to the continuous HJB equation. Experiments reproduce the extremal tail, show rates consistent with $O(\sqrt h)$ and nearly $h$-independent exact-policy-iteration decay, and assess empirical estimator effectivity. A nonsmooth example shows that the continuous residual can miss a non-viscosity solution, whereas the shifted residual detects the defect. Further tests provide a structured interval-verified certificate calibration, an early-budget benefit of policy freezing for bang-bang control, and learned-dynamics diagnostics. A structured nonlinear problem with active compact-control constraints is tested against a manufactured semi-discrete reference through $d=1024$.