V2X

Modern smart vehicles leverage multimodal sensors, ranging from high-bandwidth vision systems to low-rate physiological monitors, to provide personalized in-cabin services. However, integrating high-fidelity multimodal fusion with collaborative training is often hindered by the heterogeneous and time-varying Quality of Service (QoS) constraints of vehicular networks. Standard Federated Learning (FL) approaches enforce rigid synchronous rounds that fail to account for these resource asymmetries, leading to safety-critical timing violations and energy exhaustion. In this paper, we propose FedQoS, a novel asynchronous, event-triggered FL framework that decouples local computation from global communication via a two-phase gating mechanism. First, we introduce a resource-aware training gate that initializes local learning only when sensing buffers and energy reserves meet safety thresholds, preventing ML tasks from compromising core vehicle mobility. Second, a QoS-aware transmission policy gates uplink updates based on an efficiency score that balances model novelty against instantaneous latency and energy costs. Locally, clients optimize an objective featuring a staleness-aware proximal term that dynamically adjusts the global anchor strength based on update age. Extensive experiments on multimodal vehicular datasets demonstrate that FedQoS achieves competitive personalized accuracy with only marginal performance loss compared to FedAvg, while substantially reducing QoS violations, cutting communication overhead by 76.7%, and lowering latency cost by 26.0%, demonstrating a highly favorable accuracy and efficiency balance for real-world vehicular deployments.

Cooperative autonomous driving in the IoT-to-Edge-to-Cloud continuum requires system-level validation across vehicles, infrastructure sensors, edge-side Dynamic Map services, and in-vehicle autonomous-driving stacks. This paper presents VAST, a V2X/Dynamic Map-aware validation toolchain that connects Scenic, Scenario Simulator v2, AWSIM, Autoware, and SIM-LDM. VAST does not introduce a new search algorithm; instead, it addresses interoperability challenges, including Lanelet2-to-Scenic mapping, ROS 2-based co-simulation through SS2, Dynamic Map object injection into Autoware, and collection of TTC, PET, collision, timeout, and performance measurements. In occluded-intersection scenarios, Lanelet2-compatible constrained sampling increases the edge-case discovery rate from 40.0% to 80.0% and reduces the average time per discovered edge case from 259.7 s to 110.4 s. Under the same generated scenario distribution, Dynamic Map availability reduces the collision rate from 78.0% to 40.0% and increases non-collision outcomes from 22.0% to 60.0%, with statistically significant TTC/PET shifts. A throughput study with 1-16 NPCs shows that sampling remains below 0.1 s, whereas AWSIM/Autoware execution and restart overhead dominate runtime. These results position VAST as a practical validation infrastructure for cooperative autonomous-driving CPSs.

Vehicular federated learning (VFL) enables privacy-preserving collaborative model training for intelligent transportation systems, where communication resource allocation and gradient sparsification techniques have been explored to reduce communication overhead. However, vehicle mobility leads to rapidly varying channel conditions and transmission capacity, rendering predetermined resource allocation and sparsification decisions ineffective. In this paper, we propose FedPGT, a progressive gradient transmission scheme for VFL over time-varying channels, where vehicles progressively transmit high-magnitude gradient entries in response to instantaneous channel conditions. We establish a convergence bound that characterizes the impact of transmitted gradient entries and reveals diminishing-return behavior governed by a power-law decay. Motivated by this result, we formulate a stochastic optimization problem for online decision-making, where the main challenge lies in a cumulatively coupled, non-separable objective. To handle this challenge, we introduce per-slot surrogate transmission variables to decouple the long-term dependence across time slots and convert the original objective into an additive per-slot optimization problem, enabling a Lyapunov drift-plus-penalty approach for online scheduling. We further develop a low-complexity resource allocation algorithm for efficient online implementation. Experimental results demonstrate that the proposed scheme achieves a 3.65% accuracy improvement on the CIFAR-10 image classification task and a 12.66% reduction in average displacement error on the Argoverse trajectory prediction task compared with state-of-the-art baselines, demonstrating its applicability to diverse learning tasks under highly dynamic vehicular environments.

Integrated sensing and communication (ISAC) provides a promising foundation for beam prediction in future vehicle-to-everything (V2X) networks. However, existing sensing-assisted beamforming methods still rely heavily on radio-frequency sensing, which may become unreliable in complex vehicular environments. Meanwhile, the growing availability of heterogeneous sensors, such as cameras and LiDAR, offers new opportunities to improve beam prediction through richer environmental perception. Motivated by this, this paper proposes a multi-modal beam prediction framework for V2X networks. Specifically, we develop BeamTransFuser, a hierarchical Transformer-based architecture that progressively fuses camera, LiDAR, radar, and GPS observations for robust beam prediction. In addition, to handle possible missing modalities in practical deployment, we introduce a generative module that reconstructs missing modality features from the available observations. Experimental results on a real-world multi-modal V2X dataset show that the proposed framework consistently outperforms representative baselines, while the generative module further improves robustness under incomplete sensing conditions.

Vehicular Ad hoc Networks (VANETs) increasingly rely on federated learning (FL) to enable collaborative intelligence without sharing raw sensory data. However, most existing vehicular FL frameworks assume that all vehicles train a single global model for a common task, which limits their applicability in practical vehicular environments where vehicles may perform heterogeneous learning tasks under non-independent and identically distributed (non-IID) data, intermittent connectivity, and high mobility. To address these challenges, this paper proposes an AutoEncoder-based Reliability-Optimized Hierarchical Multi-Task Federated Learning (AERO-HMTFL) framework for dynamic multi-hop clustered VANETs. The proposed framework introduces a tri-weighted clustering metric that jointly considers vehicular mobility, shared-model similarity, and task affinity to produce mobility-stable, semantically aligned clusters. Each vehicle employs a split-model architecture comprising a shared autoencoder-based representation module and multiple task-specific heads, with only the shared autoencoder parameters exchanged while the task heads remain local. To improve robustness, cluster heads perform reliability-aware aggregation based on historical validation performance and participation frequency, while the Evolved Packet Core (EPC) conducts global shared-autoencoder fusion across clusters. Extensive simulations demonstrate that, compared with the multi-task federated learning benchmarks, AERO-HMTFL achieves up to 13% higher sustained EPC-level accuracy, exhibits more stable learning dynamics, and reduces EPC-level packet transmissions by approximately 87-97%. Under short-range connectivity, it also requires approximately 13-29% fewer communication rounds to converge.

Vehicle-to-everything (V2X) systems increasingly incorporate large language models (LLMs) for semantic tasks such as message summarization, operator assistance, and decision support at roadside units and edge nodes. Although these components are not part of safety-critical control loops, they introduce prompt-level attack surfaces that are not addressed by traditional V2X security mechanisms focused on authentication and message integrity. This paper presents Guarded-V2X, an inline semantic guardrail architecture for securing LLM-enabled V2X services under real-time constraints. The proposed system integrates rule-based ingress filtering, a lightweight safety classifier, policy-constrained structured generation, trusted-only retrieval, and post-decision adjudication to enforce machine-checkable safety boundaries prior to downstream execution. Guarded-V2X is evaluated using a four-stage experimental pipeline encompassing intrusion vulnerability analysis, calibration and latency benchmarking, guardrail validation, and robustness under adversarial stress. Experiments are conducted on a V2X-aligned simulated dataset derived from RSU advisories, operator messages, and annotated V2X message summaries. Results show that unguarded and prompt-only baselines retain residual vulnerability under multi-turn adversarial trials, while Guarded-V2X consistently reduces intrusion acceptance success rates and eliminates observed unsafe completions in two-turn settings, without exceeding latency budgets for V2X semantic advisory paths.

We propose RSTA, a domain-generalized semantic communication framework enabling source-free V2X collaborative perception under both observation-domain shift and unseen wireless channel conditions. In V2X, received semantic tokens suffer coupled degradation from pre-transmission domain drift and in-transit channel corruption; existing methods address only one source, leaving adaptation misled by tokens that are simultaneously off-domain and physically degraded. RSTA trains a pre-deployment semantic encoder for transmission stability via cross-domain prototype alignment and cross-channel gradient consistency, and updates a lightweight in-deployment decoder adapter through reliability-gated entropy minimization that restricts gradients to tokens ranked high in both semantic relevance and channel fidelity. A theoretical task robustness decomposition links each loss term to a distinct degradation source, grounding each algorithmic component in a measurable error mode. Trained on AWGN and tested on unseen Rayleigh fading, RSTA achieves +7.2 AP@0.7 over pre-deployment domain generalization on cross-weather tasks and +5.5 on cross-dataset tasks across four V2X benchmarks, updating only 0.21% of parameters in-deployment with zero inter-agent synchronization overhead.

Cooperative perception through vehicle-to-everything (V2X) communication can overcome the inherent physical limitations of individual autonomous vehicles, such as occlusions and limited sensor range. However, the development of robust V2X algorithms, particularly those relying on unified spatial representations like bird's-eye view (BEV) representation, is hampered by the lack of large-scale, multi-modal, multi-task datasets. Moreover, collecting and annotating a large set of synchronized, real-world multi-agent data is prohibitively expensive. This has resulted in a landscape where existing V2X datasets are notably limited in both size and scope. To overcome this, we introduce SimBEV2X, an advanced synthetic data generation tool built on the CARLA simulator. SimBEV2X automatically creates randomized driving scenarios to collect multi-modal sensor data alongside various types of ground truth including 3D bounding boxes with unique track IDs, HD map information, BEV segmentation maps, and semantic occupancy voxel grids from both vehicles and RSUs. We also present the SimBEV2X dataset, the largest V2X perception dataset to date. The dataset comprises 258 scenes, each involving up to 8 connected vehicles and up to 4 RSUs across a variety of road networks. The SimBEV2X dataset is an order of magnitude larger than existing V2X datasets and contains 102,200 frames, 588,520 lidar point clouds, more than 3 million images, over 27 million bounding boxes, and a comprehensive set of other annotations. Finally, we establish a strong baseline on the SimBEV2X dataset using CoopDet3D and propose CoBEVFusion, a novel architecture that combines CoopDet3D with fused axial attention (FAX) for context-aware multi-agent feature aggregation, resulting in superior performance. SimBEV2X, the SimBEV2X dataset, and CoBEVFusion are available at https://simbev2x.org and https://github.com/GoodarzMehr/SimBEV2X.

In visual storytelling, human performances are central to creative intent and narrative meaning. However, preserving human identity and performance while enabling flexible visual edits remains challenging for generative video models. We formalize this challenge as identity-preserving video restylization, which propagates scene, lighting, and style changes specified by an edited keyframe across a source video, while preserving facial likeness and performance, including expressions, eye gaze, and lip synchronization. A key obstacle is the absence of paired training data, as identity-preserving restylized video pairs are rare in real-world settings. To address this, we propose a decoupling of source-grounded identity preservation and edit-driven video synthesis. Our key insight is that facial appearance and expression should remain invariant, with illumination being the primary permissible variation. We therefore cast identity preservation as a video relighting problem, while modeling visual edit propagation as controlled video synthesis guided by the edited keyframe. Building on this formulation, we introduce ID-V2V, a video-to-video generative framework integrating complementary control signals: relit facial regions and facial normal maps tightly constrain facial likeness and performance, while edited keyframes and depth sequences enable flexible and temporally coherent generation. This design enables constructing training pairs from a single video, eliminating the need for scarce paired data. Extensive experiments demonstrate that ID-V2V significantly outperforms existing methods in preserving facial likeness and fine-grained facial performance, supports both single- and multi-subject scenarios, and delivers high visual quality, highlighting its potential as a human-centric tool for real-world content production. The code is available at: https://github.com/Eyeline-Labs/ID-V2V.

Vehicle-to-everything-aided autonomous driving (V2X-AD) significantly enhances driving performance through information sharing. However, existing collaborative perception methods only optimize module-level perception capabilities and fail to effectively serve the ultimate planning and control tasks. We propose an end-to-end collaborative driving system that directly optimizes planning task performance. The system employs MotionNetwork to fuse historical temporal information, utilizes attention mechanisms to efficiently compress spatial features into compact tokens, and adaptively fuses multi-agent features through an autoregressive decoder. Additionally, we introduce Mixture-of-Experts (MoE) architecture to enhance the model's representation capacity for heterogeneous features. Experiments demonstrate that our method achieves a driving score of 79.72, surpassing the state-of-the-art CoDriving baseline (77.15) by 3.33% in closed-loop evaluation while maintaining communication efficiency.

V2X collaborative object detection features overcoming the limitations of single-vehicle systems by aggregating environmental features from multiple collaborative agents. However, existing mainstream V2X perception methods mainly focus on 2D BEV object detection. When 3D detection task is concerned, inferior results are obtained because they ignore the 3D spatial misalignment caused by differing height and attitude among the collaborators. In this paper, we propose a novel collaborative 3D object detection framework called CoGoal3D, which extracts and refines the 3D feature gradually in a two-stage pipeline. In the first stage, a multiscale 3D-aware global fusion module is designed to mitigate the 3D spatial misalignment. The resulting proposals are then refined in the second stage with an auxiliary task of 3D point reconstruction. An effective multi-agent collaborative data augmentation strategy is further proposed to enrich the training data while minimizing information loss. Extensive experiments on public real-world datasets demonstrate that our CoGoal3D achieves new state-of-the-art performance, with 3D AP@0.7 improvements of 10.86%, 10.34%, and 10.18% on the DAIR-V2X, V2V4Real, and V2X-Real datasets, respectively. Code is available at https://github.com/Megalo-f/CoGoal3D.

European safety regulation now permits a large share of automated-driving homologation evidence to be produced virtually, provided a validated physical-virtual facility generates it. We present a deployed hybrid Vehicle-in-the-Loop (ViL) platform that couples a real instrumented vehicle with a CARLA-based digital twin (DT) through a V2X message pipeline, and we report its first integrated operation on a public-road-representative test track. A real vehicle streams ETSI-compliant CAM/CPM messages into the DT, where a GPU-accelerated Cooperative Perception (CP) module fuses them into a probabilistic occupancy grid during scenario runtime. We demonstrate the platform on a multi-vehicle double T-intersection scenario, characterise the CP workload across nominal, rain and night conditions and five localization-noise levels, and discuss the platform's current architectural limits and the engineering targets they define. The results show that CP substantially widens field-of-view (FoV) coverage and improves occupied-cell recall, and that beyond a moderate localization-noise threshold, positioning uncertainty, and not weather, becomes the dominant error source. We outline the platform's trajectory toward a Mediterranean operational design domain (ODD) testing service.

Reliable, low-latency uplink connectivity is a key requirement for C-V2X networks in dense urban environments, where fast channel variations and blockages often degrade direct vehicle-to-infrastructure links. Multi-hop relaying can restore coverage, but relay-link activation under radio, capacity, and routing constraints results in an NP-hard optimisation problem, typically solved via Mixed-Integer Linear Programming (MILP), whose runtime scales poorly with graph size. This paper introduces an edge-aware Learning-to-Optimise framework for real-time relay selection. Each V2X snapshot is modelled as a directed graph: node features encode vehicle state and traffic demand, while edge features capture radio-link capacity. An offline MILP oracle generates optimal relay configurations that supervise a Graph Isomorphism Network with Edge Features (GINE), enabling edge-level relay activation through a single forward pass, with tightly bounded inference latency. To bridge learning and exact optimisation, we also propose a hybrid GINE-Pruned MILP (GP-MILP) strategy in which GINE predictions prune the MILP search space. Experiments on a large-scale dataset generated via an OSM-SUMO-GEMV$^2$ pipeline show that GINE closely matches MILP decisions at the link level (accuracy 0.9589), F1-score (0.9544) on validation) and yields consistent end-to-end connectivity gains over a 1-hop MILP baseline (up to 9.2% with four RSUs and 12% with two RSUs). Inference latency remains tightly bounded, with all evaluated instances completing within 5ms. Moreover, GP-MILP preserves MILP-equivalent solutions (same objective value) while achieving solver runtimes below 30ms for more than 98%) of the graph instances, making MILP-grade optimisation compatible with stringent NR-V2X latency budgets.

LiDAR-based collaborative 3D perception in Vehicle-to-Everything (V2X) systems typically relies on fusing bird's-eye-view (BEV) features across agents. However, current BEV representations, typically extracted by LiDAR backbones trained from scratch, are geometry-dominated and lack general semantic priors, inherently limiting the efficacy of feature-level collaboration. Meanwhile, vision foundation models (VFMs) pretrained on large-scale image data have demonstrated strong capability in learning general-purpose and informative visual representations for 2D tasks, and have the potential to enhance agent-wise LiDAR BEV representations for collaboration. Despite this potential, adapting VFMs to LiDAR-based 3D detection remains challenging due to the substantial image-point cloud modality gap. To bridge this gap, we propose ViCo3D, a collaborative 3D object detection framework powered by VFMs. Specifically, ViCo3D adapts VFMs to LiDAR-based collaborative perception from three aspects: First, ViCo3D projects point clouds onto the BEV plane as three-channel images, enabling DINOv2 to extract BEV-space visual features from LiDAR inputs. Besides, to effectively integrate these DINOv2-derived features with LiDAR geometric features, ViCo3D introduces a multi-scale BEV fusion module within the single-agent encoder. In addition, ViCo3D adopts an ego-centric cross-agent fusion strategy to aggregate complementary information from multiple agents. Experiments on DAIR-V2X and V2XSet demonstrate that ViCo3D achieves state-of-the-art 3D detection performance. Remarkably, it delivers up to 1.8x greater collaborative gains than prior methods on DAIR-V2X. The code will be made public available for future investigation.

Vehicles are increasingly equipped with advanced V2X communication capabilities. While early V2X apps utilized services such as Cooperative Awareness Messages, recent developments have allowed more advanced applications including cooperative driving, shared perception, and sensor-sharing services. The broader mix of applications leads to heterogeneous requirements for latency and reliability. At the same time multiple communication technologies for V2X are available with pros and cons. Hybrid V2X communication can exploit the distinct advantages at the right moment to fulfill the requirements of the applications. This work studies the decision problem between cellular Uu link, NR-V2X PC5 sidelink, and the simultaneous use of both channels. We address this problem by using the multi-agent reinforcement learning algorithm MAPPO and compare it to five baselines consisting of a deep reinforcement learning (DRL) approach, a static decision tree approach and static channel selection strategies. The methods are evaluated in an urban scenario and with a set of selected communication use cases. The evaluation results show that when compared to the DRL approach, the on-time delivery ratio improves from 0.508 to 0.535 in a single-controlled-vehicle setting and from 0.548 to 0.567 when all vehicles follow the learned policy and reduces the training time by half. The gains result mainly from the advanced applications scenarios, as opposed to scenarios involving exclusively CAM messaging. This indicates future applications will benefit from such adaptive communication strategies and that multi-agent modelling is useful for addressing the underlying decision problem.

Automated vehicles rely on onboard sensors to perceive their surroundings and navigate autonomously. However, sensor performance may degrade under adverse weather conditions or when line-of-sight is obstructed. Cooperative perception (or collective perception) is expected to mitigate these limitations by enabling Connected and Automated Vehicles (CAVs) to share sensor data and collaboratively enhance situational awareness. Several studies have analyzed the potential of cooperative perception, yet the fusion of V2X data with information from onboard sensors has received limited focus. V2X data may contain errors that affect the quality of the fused data, and hence the effectiveness of cooperative perception. This study analyzes the impact of sensing measurement errors, V2X packet losses, and GNSS inaccuracies on the effectiveness of cooperative perception. The results highlight the potential of cooperative perception to enhance perception levels and range compared to using onboard sensors alone. However, they also identify key challenges related to the generation of ghost vehicles during the fusion process, which must be addressed to prevent V2X data from introducing additional errors when fused with onboard sensor data.

This paper introduces a probabilistic framework and hybrid validation methodology for V2X-enabled Collective Perception (CP) in complex traffic scenarios. The proposed Bayesian fusion algorithm extends the perceptual horizon of connected and autonomous vehicles by integrating heterogeneous sensor observations from multiple agents into a shared probabilistic occupancy grid. Each cell of this grid encapsulates both occupancy likelihood and uncertainty, enabling explainable and trustworthy situational awareness beyond the ego vehicle's field of view. To bridge the gap between simulation and real-world evaluation, a hybrid testing framework is developed, combining CARLA-based virtual environments with vehicle-in-the-loop experimentation. Experimental results in a roundabout scenario demonstrate a 260 percent increase in field-of-view coverage and a rise in occupied-cell recall from 0.82 (ego-only) to 0.94 (six-agent CP) under nominal localization conditions. Overall, the proposed approach provides a reproducible and interpretable foundation for validating CP systems, supporting the safe and certifiable deployment of cooperative autonomous vehicles.

Collaborative-perception enables multi-robot systems to enhance situational awareness by sharing perceptual information. Existing collaborative-perception systems face an inherent trade-off between communication bandwidth requirements and perception accuracy, where methods that exchange more information achieve better perception results at the cost of increased communication overhead. However, real-world communication networks impose bandwidth constraints that require minimizing communication overhead without sacrificing perception performance. To address this challenge, we propose HydraCollab, an adaptive collaborative-perception framework that (i) selectively transmits the most informative sensor features and (ii) dynamically employs collaboration strategies (intermediate or late) based on spatial confidence maps. Extensive evaluations on the V2X-R, V2X-Radar and UAV3D-mini datasets demonstrate that HydraCollab achieves the best overall trade-off between accuracy and communication cost among existing collaborative-perception methods. Relative to SOTA Where2comm, HydraCollab uses only 41% of the bandwidth on V2X-R and 26% on V2X-Radar while improving performance by 0.78% and 0.75% respectively. Our code and models are available at https://github.com/AICPS/HydraCollab.

Cellular vehicle-to-everything (C-V2X) enables cooperative perception, prediction, and planning beyond the field of view of individual agents. However, existing datasets often overlook the complexities of real-world deployment, such as limited communication bandwidth and its dynamics, heterogeneous sensing modalities, and scalability beyond a single cooperative partner. In this paper, we introduce CooperScene, a high-fidelity cooperative autonomy dataset with real-world C-V2X communication characterization. The dataset is organized into diverse scenes, including intersections, highway ramps, and parking lots. These scenes involve three connected and autonomous vehicles (CAVs) and one infrastructure roadside unit (RSU), all equipped with multi-modal sensors and commercial off-the-shelf C-V2X communication radios. All scenes are annotated with globally consistent 3D labels at 10 Hz, totaling 344K objects across 59K frames, underpinned by tight sensor- and agent-synchronization, centimeter-level localization and spatial alignment, precise cross-modality calibration, and 3GPP-standard-compliant C-V2X communication. CooperScene establishes a rigorous benchmark for evaluating multi-agent scaling and actual performance in real-world deployable settings. Project website for data and benchmark: https://cisl.ucr.edu/CooperScene

High-precision remote perception is often hindered by the severe bandwidth constraints of Vehicle-to-Everything (V2X) networks. We propose \textit{DinoLink}, a token-centric compression framework that replaces raw pixel streaming with discrete semantic communication for vehicle-cloud collaborative inference. DinoLink employs a dual-sparsity architecture: a saliency-aware selector prunes redundant background tokens, while a Residual Vector Quantization (RVQ) module collapses features into compact codebook indices. By transmitting only lightweight indices and positional priors, DinoLink achieves a $139\times$ bitrate reduction compared to uncompressed transmission while maintaining a competitive 32.8% mAP on the nuScenes dataset. Deployment simulations further demonstrate a $34.5\times$ acceleration in narrow-band environments, such as LoRa. Our results substantiate DinoLink as a robust, bandwidth-efficient frontend for high-fidelity remote perception in constrained V2X scenarios. The code is publicly available at https://github.com/UGA-MOBILITY-LAB/dino_link.

This paper examines the critical role of intent-sharing in enabling effective maneuver coordination for connected and automated vehicles (CAVs). Successful maneuver coordinations require vehicles to accurately know other vehicles' driving intentions. Intent-sharing can be achieved by the remote vehicles directly communicating their plans with the ego vehicle, as opposed to the ego vehicle predicting the trajectory on the remote vehicles' behalf. In this paper, we investigate the potential of intent-sharing on maneuver coordination effectiveness by quantifying the percentage of successful coordinations. We analyze the potential of intent-sharing by comparing its effectiveness for coordinated lane changes in a highway scenario with the effectiveness of a trajectory prediction method based on current kinematic data. Our analysis demonstrates in two scenarios substantial improvements in maneuver coordination when CAVs have direct access to the nearby vehicles' driving intentions through intent sharing. These findings highlight the importance of including intent-sharing in the maneuver coordination protocol.

We present OmniV2X, a generative foundation model for vehicle-to-everything (V2X) cooperative driving. The model directly interprets independent context sequences comprising multi-modal and multi-agent observations. The new design mitigates the computational cost of dense 3D perception, the vulnerability to data scarcity in cooperative scenarios, and the poor compliance with standardized messaging in existing methods that fuse multi-modal inputs into a shared representation. For training, we present an end-to-end supervised pipeline using a downstream trajectory generation loss, in which a high-capacity generative sequence planner implicitly learns to steer the model and leverage multi-modal inputs via cross-attention injection. As a foundation model, we demonstrate that OmniV2X pre-trained on large-scale single-agent planning datasets can efficiently adapt to cooperative environments by integrating the conditioning context with lightweight, standard-compliant V2X tokens. Evaluated on the DAIR-V2X-Seq dataset, OmniV2X outperforms existing end-to-end cooperative driving baselines, achieving state-of-the-art performance with less than 10% of the fine-tune V2X dataset and less than 1% of the communication bandwidth. We conduct comprehensive evaluations to demonstrate its computational efficiency and robustness under real-world constraints.

Cloud-hosted large multimodal models (LMMs) can provide strong open-vocabulary perception for Vehicle-to-Everything systems, but naively transmitting full-resolution frames from edge to cloud causes severe communication overhead and high cloud-side prefill latency. We present CABLE, a cloud-assisted bandwidth-efficient LMM-based encoding framework for edge-cloud perception. CABLE propagates the previous cloud segmentation mask on the edge using ego-motion compensation, refines it with residual-motion cues, and consolidates disconnected regions via a corridor envelope to form a robust region of interest (ROI). Only ROI-masked images are uploaded, while the cloud segmentation output is fed back as the prior for the next frame, forming a mask-to-ROI-to-LMM feedback loop. Experiments on five datasets (nuScenes, WOD-ZB, Waymo, KITTI, and CADC) show consistent communication savings while largely preserving perception, achieving $73$--$87\%$ ROI pixel-coverage reduction with $5$--$8\times$ estimated LMM prefill speedup at a modest detection-quality trade-off relative to full-frame inference.

Autonomous driving is shifting from isolated vehicle intelligence toward multi-agent embodied systems that share perception, infer intent, and coordinate action under uncertainty. This survey examines this transition through the lens of Shared World Models (SWMs): predictive cross-agent representations maintained across vehicles, infrastructure, and other traffic participants. We review more than 380 publications spanning vehicle-to-everything (V2X) communication, collaborative perception, inter-agent cognition, cooperative planning, end-to-end cooperative driving, and simulation and data engines for closed-loop validation. The organizing question is how exchanged observations become aligned state, intent-aware interaction, and coordinated downstream action. Across the surveyed literature, evaluation remains concentrated in simulation, curated benchmarks, and offline protocols. Foundation-model-based coordination also lacks verified real-time safety guarantees in open traffic. These gaps motivate key research priorities for multi-agent embodied autonomous driving (MAEAD): verifiable shared-state maintenance, robust intent and plan alignment, and safe coordinated action under communication, latency, and deployment constraints.

We describe a Camera and LiDAR fusion detector developed for the TUMTraf V2X cooperative 3D object detection track of the DriveX 2026 challenge. The detector fuses three roadside cameras with a fused infrastructure-plus-vehicle point cloud in a shared bird's-eye-view space and predicts boxes through a CenterPoint-style head with a generalized IoU regression loss and an IoU quality re-ranking head. Trained on the provided train and validation splits, the model reaches a 3D mAP of 0.85 on the public Codabench test split. While iterating on the system, we observed that 44 of the 50 test frames are also present in the released train (40) and validation (4) splits with their labels. We therefore conducted two additional studies to quantify how this overlap affects the final score: (1) a finetuning run that oversamples the 44 overlapping frames, reaching 0.89 mAP, and (2) a post-processing run that replaces predictions on those frames with the released ground truth, reaching 0.99 mAP (uploaded to our Codabench account for testing but not published on the leaderboard). All three configurations and their per-class results are reported.

Vulnerable road users (VRUs) account for approximately half of urban traffic deaths globally, with intersections concentrating a disproportionate share of these casualties. Recent reviews of sensing technology for VRU protection have cataloged dozens of single-sensor and dual-sensor deployments, yet none of the surveyed systems couples multi-modal sensing with edge-side near-miss analytics and bidirectional vehicle-to-everything (V2X) and pedestrian-to-everything (P2X) messaging in a single intersection cabinet. This paper presents an integrated framework for VRU protection at signalized intersections, combining LiDAR, radar, RGB camera, and thermal camera at the perception layer, edge-based prediction and surrogate-safety analytics at the computation layer, V2X and P2X messaging at the communication layer, and adaptive signal control at the actuation layer. The framework is grounded in an empirical case study using R-LiViT, the first publicly released roadside LiDAR-Visual-Thermal dataset, which provides 200 multi-modal sequences and 2,400 annotated RGB-T frames at three German intersections. Analysis of 53,319 detection annotations reveals that VRUs comprise approximately 49% of all road-user observations, that day-to-night density drops by 38% for pedestrians and 45% for vehicles while the night distribution shows a higher close-proximity share, that per-frame close-proximity event counts vary approximately 10-fold across the eight unique locations at three intersections, and that 83% of pedestrian bounding boxes are small in image space, indicating that VRUs are typically far from any single sensor. These findings support multi-modal sensing, edge-side analytics, and adaptive context-sensitive deployment rather than uniform single-sensor solutions.

Uncrewed aerial vehicles (UAVs) are increasingly considered as aerial platforms capable of providing both sensing and communication services, representing a promising paradigm for intelligent transportation systems. This paper investigates the optimal time allocation for a UAV-enabled integrated sensing and communication (ISaC) system operating in the X-band for vehicular networks. We analyze the trade-off between sensing accuracy and communication performance under practical UAV constraints and fading effects, considering both single-shadowing and double-shadowing channel models. An optimization framework is developed to allocate time between sensing and communication while guaranteeing minimum communication rates and sufficient sensing reliability. Simulation results demonstrate adaptive time allocation strategies, highlighting how UAV-to-ground channel conditions and target distances influence the balance between sensing and communication in smart mobility scenarios.

The 3GPP V2X resource allocation framework defines two entity classes -- the base station and the vehicle UE -- and four modes across LTE and NR generations. We demonstrate that this binary taxonomy is structurally incomplete. Base station-led scheduling saturates at high-density traffic nodes, producing latency-tail failures that persist even when mean packet delivery ratios approach the service-class target. UE autonomy is categorically incapable of pre-emergence warning for occluded traffic participants and insufficient for large-scope cascading environmental hazards. We propose Mode 0, a new 3GPP V2X category whose defining entity is the Roadside Computing Unit (RCU) -- an infrastructure ensemble integrating elevated sensing (Seeing), sidelink communication (Speaking), and local computational evaluation (Thinking), owned by traffic management authorities. Mode 0 defines a subfamily spectrum from Mode 0a (all-passive UEs, the guaranteed minimum) through Mode 0c (all-active UEs, the optimal target). Convergent deployment evidence from Chinese national standards (DB11/T 2329.1-2024, T/ITS 0224.1-2025), China Unicom RS-MEC infrastructure, and European and US C-V2X programs confirms that both institutional sides are converging on the roadside traffic node without a coordination standard. A fifteen-run Multi-Agent Proximal Policy Optimization (MAPPO) simulation validates the architectural family: Mode 0a in shared-pool baseline sits at the analytical symmetric-Nash coordination floor; Mode 0c with demand separation achieves strict Pareto improvement for both traffic classes (M0 PDR 0.999, M1 PDR 0.998 at $ρ_{\rm pool} \leq 1$) and lifts the worst-TTI delivery ratio from near-zero to 0.601 -- the only configuration satisfying the latency safety requirement structurally. We call for a 3GPP study item on Mode 0 within the NR-V2X sidelink enhancement work programme.

Single-vehicle Vision-Language Models (VLMs) are fundamentally constrained by sensor occlusions. While Vehicle-to-Everything (V2X) systems mitigate this, current benchmarks lack the cooperative reasoning required for resolving ambiguities in complex environments. We introduce D2-V2X, a spatially-aware Question-Rationale-Answer (QRA) benchmark featuring 8,500 triplets derived from multimodal vehicle and infrastructure sensors. We additionally establish a baseline that aligns 3D LiDAR features with the VLM's latent space. By enforcing natural language Chain-of-Thought rationales prior to structured JSON outputs, our model is forced to explicitly articulate spatial relations. Our experiments demonstrate that grounding VLMs in cooperative LiDAR achieves 24.4% recall in identifying occluded hazards compared to near-zero in zero-shot models and reduces spatial estimation error for visible objects by 77% compared to the zero-shot baseline. While the model achieves a functional decision-making F1-score of 53.5, we identify 3D-to-2D projection as a fundamental bottleneck in current VLM architectures, establishing a new baseline for future innovation. Data, code, and trained models available at https://github.com/KevinRichard1/D2-V2X

Cooperative perception enabled by Vehicle-to-Everything (V2X) communication enhances autonomous driving safety by creating a unified environmental representation through shared sensory data. While recent works have advanced multi-agent fusion for improved perception, uncertainty quantification in such cooperative frameworks remains largely unexplored. This paper introduces Hyper-V2X, a hypernetwork-based framework for estimating both epistemic and aleatoric uncertainties in V2X-based perception. Specifically, we propose a partial weight generation scheme and V2X context embedding module that conditions a Bayesian hypernetwork on fused multi-agent features to generate weight distributions for stochastic Bird's-Eye-View (BEV) segmentation. Unlike existing deterministic BEV models, Hyper-V2X enables efficient uncertainty estimation with little computation overhead. Our approach is architecture-agnostic, and can be seamlessly integrating with modern cooperative backbones such as CoBEVT. Experiments on the OPV2V benchmark demonstrate that Hyper-V2X provides accurate, well-calibrated uncertainty estimates and improves overall perception reliability. Our code and benchmark are publicly available under an open-source license: https://github.com/abhishekjagtap1/Hyper-V2X

Dense low-altitude aerial operations require more than pre-flight route coordination and last-resort collision avoidance. Once aircraft are airborne, disturbances can emerge on timescales shorter than strategic reauthorization can absorb, while collision avoidance is too late and disruptive to serve as routine traffic management. Although tactical separation is recognized as the intermediate layer, realizing it at scale requires a deployable neighborhood communication mechanism that provides fresh, trusted information for local coordination. This paper presents what is, to our knowledge, the first controller-coupled characterization of an all-airborne, sidelink-class, intent-first vehicle-to-vehicle (V2V) tactical neighborhood exchange stack for dense Unmanned Aircraft System Traffic Management (UTM) operations. Unlike awareness-only broadcast, the proposed exchange combines refreshed state and intent beacons for local awareness, cooperative perception, and degraded-mode assessment with event-triggered messages for yielding, sequencing, release, and contingency coordination. We implement and evaluate this model on an all-airborne V2V stack using sidelink-class C-V2X modules with authenticated freshness checks. Evaluation uses a scenario-driven, high-volume stress campaign supported by real-time, field-anchored infrastructure. Results show that V2V reduces stale-belief divergence, preserves observability through cooperative perception, rejects invalid tactical messages, suppresses false local inference, and structures shared-resource coordination. The implemented stack provides a viable communication layer for tactical separation in lower-to-moderate regimes, but transitions toward guarded fallback as density, impairment, and complexity increase. These findings position intent-first aerial V2V as a bounded enabler for scaling tactical coordination in disturbance-driven urban airspace.

With the advent of sixth-generation (6G) mobile communication technology, vehicle-to-everything (V2X) communication faces unprecedented challenges in communication efficiency, system generalization capabilities, and model collaboration. Conventional machine learning struggles with high-dimensional state spaces, slow convergence, and poor generalization under heterogeneous V2X nodes, rapidly varying channels, and multimodal sensing data in V2X systems. To address these issues, we propose a quantum-enhanced framework for V2X communication and model aggregation that targets efficient, robust, and intelligent transportation in 6G, which includes four modules: the channel-adaptive semantic communication module, the multimodal fusion module, the model transfer module, and the federated aggregation module. Specifically, the channel-adaptive semantic communication module leverages quantum convolutional neural networks (CNN) and quantum distortion metrics to enable efficient transmission and strong generalization across diverse conditions. The multimodal fusion module exploits quantum attention and entanglement to compress features and associate semantics across heterogeneous data. The model transfer module employs quantum reinforcement learning to model decision-making and improve adaptability in dynamic environments. The federated aggregation module integrates quantum tensor decomposition with backpropagation-based corrections to provide privacy preservation with low overhead and to strengthen global model robustness. This work outlines a new paradigm for communication and model collaboration in future 6G intelligent transportation.

Collisions at non-line-of-sight (NLOS) intersections remain a major safety concern because drivers have limited visibility of approaching traffic. V2X based warnings can reduce these risks, yet many vehicles are not equipped with V2X and drivers may ignore in vehicle alerts. Collective perception (CP) can compensate for low V2X penetration by extending the awareness of connected vehicles, but it cannot influence unconnected vehicles. To fill this gap, our work introduces a complementary concept that adds a cooperative humanoid robot as an active traffic moderator capable of physically stopping a vehicle that attempts to merge into an unseen traffic stream. The system operates on two parallel perception pathways. A dual camera infrastructure unit detects the position, speed and motion of approaching vehicles and transmits this information to the robot as a collective perception message (CPM). The robot also receives cooperative awareness messages (CAM) from connected vehicles through its onboard V2X unit and can act as a relay for decentralized environmental notification messages (DENM) when safety events originate elsewhere along the road. A fusion module combines these streams to maintain a robust real time view of the main road. A Zone of Danger (ZoD) is defined and used to predict whether an approaching vehicle creates a collision risk for a merging road user. When such a risk is detected, the robot issues a human-like STOP gesture and blocks the merging path until the hazard disappears. The full system was deployed at the Future Mobility Park (FMP) in Rotterdam. Experiments show that the combined vision and V2X perception allows the robot to detect approaching vehicles early, predict hazards reliably and prevent unsafe merges in real world NLOS conditions.

Vehicle-to-Everything (V2X) communication has emerged as a promising paradigm for autonomous driving, enabling connected agents to share complementary perception information and negotiate with each other to benefit the final planning. Existing V2X benchmarks, however, fall short in two ways: (i) open-loop evaluations fail to capture the inherently closed-loop nature of driving, leading to evaluation gaps, and (ii) current closed-loop evaluations lack behavioral and interactive diversity to reflect real-world driving. Thus, it is still unclear the extent of benefits of multi-agent systems for closed-loop driving. In this paper, we introduce MDrive, a closed-loop cooperative driving benchmark comprising 225 scenarios grounded in both NHTSA pre-crash typologies and real-world V2X datasets. Our benchmark results demonstrate that multi-agent systems are generally better than single-agent counterparts. However, current multi-agent systems still face two important challenges: (i) perception sharing enhances perceptions, but doesn't always translate to better planning; (ii) negotiation improves planning performance but harms it in complex and dense traffic scenarios. MDrive further provides an open-source toolbox for scenario generation, Real2Sim conversion, and human-in-the-loop simulation. Together, MDrive establishes a reproducible foundation for evaluating and improving the generalization and robustness of cooperative driving systems.

V2X can warn an autonomous vehicle about hazards beyond line-of-sight, but it also brings uncertainty: messages may be delayed, dropped, or even forged. Meanwhile, map knowledge may change during a trip, forcing the vehicle to replan under tight real-time budgets. This paper studies how to make motion planning and low-level control robust to such uncertain, event-driven updates. We present MORPH-U, a CARLA-based closed-loop stack that fuses LiDAR/radar/camera with V2X (CAM/DENM) into a Local Dynamic Map (LDM) and triggers Hybrid-A* replanning when validated hazards or map changes affect the planned route. We expose the planning/control trade-offs via a multi-objective formulation over tracking error, safety margin (minimum TTC), responsiveness, and smoothness, and select operating points using Pareto-frontier analysis. To avoid unsafe replanning from faulty V2X triggers, MORPH-U adds a lightweight Byzantine-inspired acceptance gate that combines a quorum rule with an on-board sensor veto. Experiments in dynamic CARLA scenarios show that V2X-augmented LDM improves downstream safety, Pareto tuning provides controllable accuracy-comfort trade-offs, and the gate prevents replanning under saturated false-DENM injection ($p_{\text{attack}}=1.0$).

Misbehavior detection in Vehicle-to-Everything (V2X) networks is a second line of defense against insider falsification attacks that cryptographic mechanisms alone cannot address. Existing learning-based Misbehavior Detection Schemes (MDSs) are supervised, requiring labeled attack samples at training time, thus failing to counter unseen falsification attacks. We present PAMPOS, a causal transformer-decoder trained on benign VeReMi++ trajectories to learn normal mobility patterns. At inference time, misbehavior is identified as a deviation from the model's next-step kinematic predictions using a top-K normalized anomaly scoring mechanism that localizes falsification to specific kinematic features, without requiring attack-labeled training data. We evaluate PAMPOS across all 19 attack types in VeReMi++ under rush-hour and afternoon scenarios, achieving Area Under the Curve (AUC) values of up to 0.98 and F1-scores of up to 0.95 for most attack categories.

This paper presents a Vehicle-to-Everything (V2X) communication framework that enables decentralized cooperation among social robots operating in complex urban traffic environments. Building on ETSI Cooperative Awareness and Maneuver Coordination services, the framework introduces two robot-centric facility-layer services: the Robot Awareness Service (RAS) and the Robot Maneuver Coordination Service (RMCS), realized through the Robot Awareness Message (RAM) and the Robot Maneuver Coordination Message (RMCM), respectively. RAS enables role-aware, task-oriented robot awareness while integrating externally detected Vulnerable Road Users (VRUs), including non-V2X pedestrians, into cooperative awareness. RMCS supports event-driven, low-latency coordination of robot maneuvers under explicitly established roles, without centralized infrastructure or prior pairing. A real-world proof of concept demonstrates deterministic multi-robot coordination between a humanoid robot and a quadrupedal robot assisting a pedestrian during a road-crossing scenario, governed by a formally specified finite-state coordination model. Complementary simulations evaluate robot-mediated VRU clustering in mixed V2X environments, showing that RAS-based clustering integrates non-V2X VRUs in safety-critical areas while reducing redundant transmissions from V2X-enabled VRUs, thereby lowering channel load. Together, the proposed services provide a scalable and standards-aligned foundation for integrating cooperative robots into future Connected, Cooperative, and Automated Mobility ecosystems.

Event cameras offer high temporal resolution, low latency, and wide dynamic range, making them promising receivers for visible light communication (VLC) in vehicle-to-everything (V2X) applications. This work presents an event-camera-based VLC system addressing three key challenges: bandwidth saturation, multi-transmitter reception, and latency characterization. We adopt a positive-event-only mode and design a protocol that suppresses event generation while maintaining communication distance and a wide field of view. We also propose a method to identify multiple transmitters and demonstrate simultaneous reception from up to three LEDs. Finally, we evaluate end-to-end latency in real vehicular scenarios and show that the system meets cooperative perception requirements. These results demonstrate that event-camera-based VLC is a feasible complement to existing V2X technologies (e.g., RF).

Millimeter-wave (mmWave) frequencies promise multi-gigabit connectivity for vehicle-to-everything (V2X) networks, but face challenges in terms of severe path loss and mobility-related beam misalignment. Reliable V2X connectivity requires fast, double-directional beam alignment. However, existing methods suffer from high training overhead and limited generalization to unseen scenarios. This paper presents VIsion-based BEamforming(VIBE), a hybrid model-based, closed-loop, learning architecture for real-time double-directional mmWave beam management primed by camera sensing. VIBE fuses machine learning, model-based reasoning, and closed-loop RF feedback to balance beam-pair establishment latency with link quality. VIBE bypasses exhaustive training overhead and accelerates link establishment by leveraging camera observations to reduce the beam-search space. Lightweight beam refinement and offset tracking mechanisms adaptively refine beams in response to dynamic application requirements. VIBE is implemented and evaluated across online indoor/outdoor testbeds, public datasets, and real-time vehicular experiments, demonstrating strong generalization capabilities, making it suitable for real-time V2X communication. Comparisons with 5G NR hierarchical beamforming show that VIBE consistently maintains lower outage rates. Furthermore, VIBE outperforms state-of-the-art end-to-end ML models for beam selection when evaluated on public datasets and achieves outage rates as low as 1.1-1.4 %. The results show that a hybrid model-based, closed-loop learning architecture is better suited for real-world mmWave vehicular connectivity than end-to-end trained ML models. For reproducibility, we publish our code to https://github.com/UNL-CPN-Lab/Look-Once-Beam-Twice.

Accurate 3D object detection is essential for ensuring the safety of autonomous vehicles. Cooperative perception, which leverages vehicle-to-everything (V2X) communication to share perceptual data, enhances detection but is vulnerable to channel impairments, such as noise, fading, and interference. To strengthen the reliability of intelligent transportation systems, this work improves the robustness of V2X cooperative perception under communication conditions that reflect common channel impairments. This paper proposes an Adaptive Feature Fusion Transformer (AFFormer), a Transformer-based framework that mitigates the adverse effects of corrupted features by modeling temporal, inter-agent, and spatial correlations. AFFormer introduces three key modules: Multi-Agent and Temporal Aggregation for context-aware fusion across agents and over time, Dual Spatial Attention for efficient modeling of spatial dependencies, and Uncertainty-Guided Fusion for entropy-driven refinement of fused features. A teacher-student knowledge distillation strategy further enhances robustness by aligning fused features with reliable early-collaboration supervision. AFFormer is validated on the V2XSet and DAIR-V2X datasets, where it consistently outperforms existing methods under both ideal and impaired communication conditions, demonstrating improved robustness to communication-induced feature degradation while maintaining a competitive efficiency-accuracy trade-off.

Perception for automated driving is largely based on onboard environmental sensors, such as cameras and radar, which are cost-effective but limited by line-of-sight and field-of-view constraints. These inherent limitations may cause onboard perception to fail under occlusions or poor visibility conditions. In parallel, cooperative awareness via vehicle-to-everything (V2X) communication is becoming increasingly available, enabling vehicles and infrastructure to share their own state as object-level information that complements onboard perception. In this work, we study how such V2X information can be integrated into 3D object detection and how robust the resulting system is to realistic V2X imperfections. Using the nuScenes dataset, we emulate object-level cooperative awareness messages from ground truth, injecting controlled noise and object dropout to mimic real-world conditions such as latency, localization errors, and low V2X penetration rates. We convert these messages into a dedicated bird's-eye view (BEV) input and fuse them into a BEVFusion-style detector. Our results demonstrate that while object-level cooperative information can substantially improve detection performance, achieving an NDS of 0.80 under favorable conditions, models trained on idealized data become fragile and over-reliant on V2X. Conversely, our proposed noise-aware training strategy, coupled with explicit confidence encoding, enhances robustness, maintaining performance gains even under severe noise and reduced V2X penetration.

Predictive maintenance for connected vehicles offers the potential to reduce unexpected breakdowns and improve fleet reliability, but most existing systems rely exclusively on internal diagnostic signals and are validated on simulated or industrial benchmark data. This paper presents a contextual data fusion framework integrating vehicle-internal sensor streams with external environmental signals -- road quality, weather, traffic density, and driver behaviour -- acquired via V2X communication and third-party APIs, with inference at the vehicle edge. The framework is evaluated across four layers. A feature group ablation study on a physics-informed synthetic dataset shows contextual features contribute a 2.6-point F1 improvement; removing all context reduces macro F1 from 0.855 to 0.807. On the AI4I 2020 benchmark (10,000 samples), LightGBM achieves AUC-ROC 0.973 under 5-fold stratified cross-validation with SMOTE confined to training folds. A noise sensitivity analysis shows macro F1 remains above 0.88 at low noise and degrades to 0.74 at high noise. Most critically, the pipeline is validated on real-world telemetry from five vehicles across three countries (India, Germany, Brazil), comprising 992 trips and 11 evaluable service events identified from component wear resets in the trip logs. Across six wear-driven events spanning four vehicles, the model achieves 100% detection with mean MAE of 12.2 days. A fine-tuning ablation shows the base synthetic model already achieves 6/6 binary detection; per-vehicle adaptation reduces wear-driven MAE from 25.9 to 12.2 days. SHAP analysis confirms contextual and interaction features rank among the top 15 predictors. Edge-based inference reduces estimated latency from 3.5 seconds to under 1.0 second relative to cloud-only processing.

Radio resource allocation (RRA) is a critical function in cellular vehicle-to-everything (C-V2X) networks, where vehicles must share limited wireless resources to support safety-critical communications. Multi-agent reinforcement learning (MARL) has emerged as a promising approach for this problem. However, key MARL challenges, including non-stationarity, coordination difficulty, large action space, partial observability, and limited robustness and generalization, are often intertwined, making it difficult to assess their individual impact on performance in vehicular environments. Moreover, existing studies primarily focus on developing new algorithms, while systematic benchmarking and comparative analyses remain limited. To address this gap, we formulate C-V2X RRA as a hierarchy of multi-agent interference games that progressively introduce key MARL challenges. Based on this framework, we develop a suite of benchmark learning tasks and construct training and testing datasets from SUMO-generated highway traces with diverse vehicular topologies and interference conditions. Using the proposed benchmark, we evaluate representative MARL algorithms spanning value-based, actor-critic, Independent Learning (IL), and Centralized Training with Decentralized Execution (CTDE) paradigms. The results identify robustness and generalization across diverse vehicular topologies as the dominant challenge among those considered in this work, reducing average normalized return by up to 59 percentage points, and show that, on the most challenging task, the best actor-critic method outperforms the best value-based method by 42%. By revealing the relative strengths and limitations of different MARL paradigms and open-sourcing the code, datasets, and benchmark suite, this work provides a systematic and reproducible foundation for evaluating and advancing MARL algorithms in vehicular networks.

Intelligent Transportation Systems (ITS) demand real-time collision prediction to ensure road safety and reduce accident severity. Conventional approaches rely on transmitting raw video or high-dimensional sensory data from roadside units (RSUs) to vehicles, which is impractical under vehicular communication bandwidth and latency constraints. In this work, we propose a semantic V2X framework in which RSU-mounted cameras generate spatiotemporal semantic embeddings of future frames using the Video Joint Embedding Predictive Architecture (V-JEPA). To evaluate the system, we construct a digital twin of an urban traffic environment enabling the generation of d verse traffic scenarios with both safe and collision events. These embeddings of the future frame, extracted from V-JEPA, capture task-relevant traffic dynamics and are transmitted via V2X links to vehicles, where a lightweight attentive probe and classifier decode them to predict imminent collisions. By transmitting only semantic embeddings instead of raw frames, the proposed system significantly reduces communication overhead while maintaining predictive accuracy. Experimental results demonstrate that the framework with an appropriate processing method achieves a 10% F1-score improvement for collision prediction while reducing transmission requirements by four orders of magnitude compared to raw video. This validates the potential of semantic V2X communication to enable cooperative, real-time collision prediction in ITS.

Cooperative perception through Vehicle-to-Everything (V2X) communication offers significant potential for enhancing vehicle perception by mitigating occlusions and expanding the field of view. However, past research has predominantly focused on improving accuracy metrics without addressing the crucial system-level considerations of efficiency, latency, and real-world deployability. Noticeably, most existing systems rely on full-precision models, which incur high computational and transmission costs, making them impractical for real-time operation in resource-constrained environments. In this paper, we introduce \textbf{QuantV2X}, the first fully quantized multi-agent system designed specifically for efficient and scalable deployment of multi-modal, multi-agent V2X cooperative perception. QuantV2X introduces a unified end-to-end quantization strategy across both neural network models and transmitted message representations that simultaneously reduces computational load and transmission bandwidth. Remarkably, despite operating under low-bit constraints, QuantV2X achieves accuracy comparable to full-precision systems. More importantly, when evaluated under deployment-oriented metrics, QuantV2X reduces system-level latency by 3.2$\times$ and achieves a +9.5 improvement in mAP30 over full-precision baselines. Furthermore, QuantV2X scales more effectively, enabling larger and more capable models to fit within strict memory budgets. These results highlight the viability of a fully quantized multi-agent intermediate fusion system for real-world deployment. The system will be publicly released to promote research in this field: https://github.com/ucla-mobility/QuantV2X.