Model Predictive Control

While deep learning models achieve state-of-the-art performance in complex tasks, they remain brittle when faced with new environments or sensory deprivation. In contrast, biological systems exhibit remarkable tolerance to these challenges. We address this vulnerability by developing a recurrent neural network (RNN) whose architecture is directly derived from the synaptic-resolution brain connectome of the fruit fly Drosophila melanogaster. We demonstrate the feasibility of training the fly connectome neural network (FLYNN) to perform vision-based navigation in MuJoCo, achieving performance comparable to modern hand-crafted networks of similar parameter counts. Crucially, FLYNN exhibits superior resistance to out-of-distribution (OOD) data and tolerance to sensory loss without further training. It remained functional even under total vision loss while hand-crafted networks largely failed, even when specifically trained with camera dropout. Principal Component Analysis (PCA) of the internal state of FLYNN suggests that it exhibits a particularly high degree of representational modularity, which might be related to its robustness. Our work provides a new direction for designing resilient artificial agents following the topology of biological brains.

Sit-to-stand (STS) transitions impose significant joint-loading demands on elderly individuals, making them a primary target for lower-limb exoskeleton assistance. However, accurate trajectory tracking during STS is challenging due to complex, time-varying human exoskeleton interaction dynamics and inter-subject variability that render model-based control approaches difficult to apply in practice. This paper presents an intelligent model free adaptive backstepping control strategy for a bilateral lower-limb exoskeleton during STS motion. The proposed controller design uses an ultra-local second-order model to avoid explicit system identification, while a Gaussian radial basis function (RBF) neural network estimates the unknown lumped dynamics online. To further improve phase-aware tracking performance, a Twin Delayed Deep Deterministic Policy Gradient (TD3) reinforcement learning agent is integrated as a supervisory gain scheduler that adaptively adjusts controller gains across the distinct phases of STS motion. The proposed controller is evaluated through co-simulation in MATLAB/Simulink and Simscape Multibody using OpenSim-derived reference trajectories and benchmarked against state-of-the-art controllers. Results demonstrate that the proposed controller achieves the lowest average RMSE of 0.078 degree across all joints, representing improvements of 60.2%, 54.4%, 48.7%, and 42.6% over proportional integral derivative (PID), model-free adaptive control (MFAC), linear quadratic regulator (LQR), and sliding-mode control (SMC), respectively. TD3 integration further reduces tracking error by 35%, 33%, and 79% at the hip, knee, and ankle joints compared to the standalone RBF-MFAC baseline. These results demonstrate the effectiveness and robustness of the proposed controller design for assistive exoskeleton control during STS transitions.

The cardiovascular system evolves along a bounded trajectory in physiological state space that converges to a compact geometric object: the cardiac attractor. A wearable photoplethysmograph (PPG) or electrocardiograph (ECG) observes a one-dimensional projection of this attractor; by Takens' embedding theorem, delay coordinates reconstruct its full geometry. Three decades of nonlinear cardiac dynamics have extracted Lyapunov exponents, recurrence statistics, and sample entropy from reconstructed attractors, yet no principled account exists of which attractor properties capture which cardiovascular quantities, or why, leaving feature selection as a search problem and negative results uninterpretable. We introduce Attractor Domain Theory (ADT), which proves that the reconstructed attractor's information partitions into three mutually non-redundant domains: the Geometry Domain G (delay embedding; native capability: artifact rejection), the Ergodic Domain S (asymptotic statistical invariants; native capability: stability estimation), and the Variational Domain V (finite-time Lyapunov exponent field; native capability: hemodynamic inference). We prove a Domain Sufficiency Theorem (the Parseval analog for attractor information) and establish that three domains are necessary and sufficient. Geometry Domain validation via the SCSI framework across 176,742 PPG segments from four datasets yields AUC = 0.757 [0.686-0.828] and NPV = 0.966 after correcting three systematic evaluation artifacts (+0.179 net inflation). Ablation confirms C_NL as the dominant Geometry Domain component (Delta AUC = -0.413) and intra-domain redundancy across five components.

As robots move from controlled environments into real-world settings, it becomes increasingly crucial to ensure that they perform as expected. A key step toward that goal is a rigorous specification of the desired robot behavior, capturing intricate temporal, spatial, and logical requirements. Complementing this, plan and control synthesis methods are needed to fulfill these specifications with provable guarantees. This manuscript presents temporal logics - particularly linear and signal temporal logic - as expressive specification languages for robot behavior over time. We then discuss principles of formal synthesis, from discrete graph- and game-based approaches to sampling-based motion planning, trajectory optimization, and control-certificate-based synthesis. Finally, we outline challenges in deploying formal synthesis in real-world robotics, emphasizing the interplay between modeling fidelity, computational tractability, and the types of rigorous guarantees that can be achieved.

NeuroEvolution of Augmenting Topologies (NEAT) is a widely used neuroevolution algorithm for learning neural network architectures and weights for control tasks. However, standard offline optimisation searches for connection strengths directly, which can scale poorly in high-dimensional weight spaces and more difficult continuous control problems. Hybrid methods that combine neuroevolution with online learning can address this challenge, but their theoretical properties remain underexplored. This paper gives the first regret analysis for a general NeuroEvolutionary Online Learning (NEOL) framework, which decouples learning into two timescales: an outer loop for architecture search and an inner loop for online weight adaptation via rewardmodulated plasticity. Under mild conditions, we prove that NEOL achieves sublinear regret. Empirically, under fixed interaction budgets on four standard control benchmarks, a NEAT-based NEOL implementation achieves higher final fitness and lower variance than pure NEAT, and is competitive with strong reinforcement learning (RL) baselines on several tasks. The results are supported byWilcoxon rank-sum tests and ablation studies. Overall, the findings show that online plasticity can improve the sample efficiency and robustness of two-timescale neuroevolution. Code is available at https://github.com/boobaa2001/NeuroEvolution Online Learning NEOL.

In this article, we present a robust $Q$-learning algorithm for discrete-time mean-field control problems under Wasserstein uncertainty in the common noise law. The algorithm combines a quantization-and-projection scheme with a Wasserstein dual reformulation on the common-noise space. We establish its convergence together with finite-time iteration bounds for both synchronous and asynchronous learning schemes. Numerical experiments on systemic risk and epidemic models compare the asynchronous implementation with an idealized Bellman iteration, illustrate the robustness-performance tradeoff under common-noise misspecification, and report the observed convergence behavior of the asynchronous $Q$-learning algorithm.

Autonomous vehicles must plan trajectories that satisfy a multitude of requirements on safety, passenger comfort, and compliance with traffic rules. However, in safety-critical scenarios, it is not always possible to satisfy all requirements simultaneously, necessitating their prioritization based on importance. At the same time, in these safety-critical scenarios, the uncertainty in trajectory predictions of the surrounding traffic, such as other vehicles and pedestrians, should be explicitly accounted for. In this work, we propose an uncertainty-aware trajectory planning framework that incorporates a predefined lexicographic ordering over Signal Temporal Logic (STL) specifications that stays valid under uncertainty. We implement this formulation with Model Predictive Path Integral (MPPI) control and we demonstrate the effectiveness of our method on simulation scenarios, showing that our framework efficiently handles conflicting objectives under realistic multi-modal uncertainty.

Actor-Critic Model Predictive Control (MPC) effectively addresses complex, non-convex control problems, but guaranteeing the closed-loop stability of sequence-based learning models within these pipelines remains challenging. This paper introduces a novel Transformer-Actor-Critic MPC architecture with formal robustness guarantees. First, we prove that Transformer networks can satisfy global incremental Input-to-State Stability ($δ$ISS). We then leverage Riemannian contraction theory to analyze the interconnected dynamics between the physical plant and the predictive neural network. Finally, we integrate these theoretical bounds as a training regularizer to yield a certifiably robust policy. The framework is validated on a nonlinear 3D drone model executing target-reaching and obstacle-avoidance maneuvers.

This paper studies a class of distributed optimization problems in networked nonlinear systems (NNSs) subject to input delays and consensus constraints. It introduces input-delay tolerant semiglobal convergence (IDTSC), meaning that for any prescribed compact initial set there exists an admissible delay bound under which the optimal solution is computed within consensus constraints and all node states converge to the solution. Building on a hierarchical design and input-to-state stability analysis, a new semiglobal input-delay tolerant (SIDT) algorithm is developed that practically achieves IDTSC for distributed optimization under the coupling between input delays and nonlinear dynamics. Further, by relaxing strict convexity requirements through the Polyak-Łojasiewicz condition, the SIDT algorithm broadens its applicability to nonconvex optimization. Finally, numerical experiments corroborate the theory on NNSs with input delays.

A control framework is proposed for safe local navigation of mobile robots equipped with Ackermann steering in unmapped environments where a global goal is absent. Based on local obstacle detections, the safest heading angle is determined along the direction of the largest open space ahead of the vehicle. Guided by this direction, bounding lines are constructed on the left and right sides of the vehicle to achieve obstacle separation. These bounding lines are obtained by solving a convex quadratic optimization that maximizes vehicle-to-obstacle clearance. Optionally, conditions are imposed on the bounding lines to preserve parallelism and smooth abrupt changes from prior control steps. A feedback-linearizing controller is then used to regulate the vehicle's distance from one or both bounding lines, effectively enabling tracking of a local reference path that preserves safety through obstacle clearance maximization. Open-source code is included for the application of this control scheme. Experimental results demonstrate that the proposed method produces safer navigation paths with significantly shorter computation times, compared to some existing exploration-based planners.

Multi-agent LLM deliberation, where agents exchange and revise answers over several rounds, is increasingly used to improve reasoning and accuracy, yet how and why it works is rarely modelled. Such deliberation mirrors how humans reach decisions. As social animals we are pulled both by the group, the herd effect that classical opinion-dynamics models such as DeGroot and Friedkin--Johnsen capture, and by our own internal belief, which they do not. We model multi-agent deliberation as a closed-loop dynamical system in which each agent carries a hidden internal belief, its anchor, that continually pulls its opinion regardless of its neighbours. We show this anchor can be recovered from the deliberation alone, and that it explains a behaviour classical consensus rules forbid: an agent's confidence in the correct answer can climb past where any agent started, escaping the space (convexhull) formed by the initial beliefs. Checking whether the recovered anchor also predicts held-out runs (generalizes) gives a simple test for when a model is truly driven bysuch an anchor. Across three open-weight model families this is a spectrum, not all-or-nothing. All anchors' influence are about equally strongly, but they differ in where the anchor sits, and only when it sits far from the initial opinions does deliberation escape the hull and need the full closed-loop model.

In this letter, we present a hierarchical control framework that enables wheeled bipedal robots to perform planar object sliding tasks with their wheeled legs. The proposed approach formulates a nonlinear model predictive controller (NMPC) based on a reduced-order three rigid bodies (TRB) dynamical model that explicitly accounts for the hip roll degree of freedom and multiple wheel-environment contact modes, which is essential for lateral stepping and pedipulation tasks. Within this framework, the NMPC simultaneously regulates robot locomotion and interaction forces, allowing the robot to stably execute both rolling and object manipulation behaviors. A trajectory-optimization-based robot-object motion planner is developed to generate reference motions that incorporate stick-slip transitions in ground-object contact. Two representative pedipulation motions, namely scooting and lateral sliding, are validated through real-world hardware experiments, in which the robot successfully retrieves a 1 kg object from under a desk and slides a 4 kg object over a distance of 0.228 m via scooting.

This paper compares the performance of model-free controllers on a nonlinear system under cyberattacks, including false data injection and denial-of-service attacks. Four RL reward types are analyzed for accuracy, cost, and resilience. Results show that the Lyapunov reward offers the best resilience with low tracking error. Exponential mode also provides good trade-offs with acceptable resilience under moderate training conditions. Progressive and linear rewards converge faster but are less robust. RL-MPCs show strong steady-state resilience but require longer training times; RL-PID controllers are faster with significantly less training time. Proximal Policy Optimization outperforms Deep Deterministic Policy Gradient with a significant reduction in KPI variance. This study serves to highlight how well-designed RL rewards can improve performance and resilience against cyber threats.

Transformer-based architectures have significantly advanced the generation of complex symbolic sequences, yet a significant gap remains in achieving fine-grained, interpretable control over discrete signal attributes. This paper investigates the mechanistic interpretability of the Multitrack Music Transformer (MMT) and proposes a framework for deterministic attribute modulation without retraining to bridge this gap via inference-time activation steering. Utilizing the Difference-in-Means (DiffMean) methodology, we isolate latent directions for signal attributes, specifically Pitch and Duration, within the residual stream. We validate the Linear Representation Hypothesis in this domain, achieving high correlation between steering magnitude and attribute shift. To address the inherent feature entanglement in multi-attribute steering, we introduce a Dual Steering framework utilizing Gram-Schmidt Orthogonalization. Experimental results demonstrate that this geometric decoupling reduces conceptual interference and signal degradation compared to naive vector addition, enabling independent deterministic control even against strong autoregressive conditioning.

Conventional human-in-the-loop approaches typically involve users only when a robot encounters failure or uncertainty, treating humans primarily as tools for improving robot performance. However, in many human-centered robotics settings, interaction should support engagement by keeping users involved in decision-making rather than limiting them to failure-driven interventions. This is particularly compelling in physical caregiving, where mobility limitations can reduce users' ability to intervene or modulate the robot's behavior in the moment. As a result, failure-driven interaction policies may relegate users to passive observers for long stretches of the task. For example, a user with mobility limitations may feel less engaged when being continuously and passively fed by a robot. At the same time, overly frequent interaction can be tiring and increase the user's workload. To address this trade-off, we propose Engagement-aware MPC (E-MPC), a user-engagement-aware method that plans interaction to maintain engagement while respecting a workload constraint. E-MPC leverages a user interaction dynamics model that captures how user engagement evolves as a function of both the frequency and type of interaction. Rather than requesting input only when difficulties arise during task execution, the robot proactively considers the user's preferred level of engagement throughout the task, balancing autonomy and interaction while ensuring task success. We evaluate E-MPC in simulation with several ablations and baseline comparisons. Results demonstrate the effectiveness of our approach across diverse user personas. In addition, we conduct a real-world user study with participants with emulated mobility limitations on a robot-assisted bite acquisition system, showing that E-MPC improves user experience while maintaining task success.

Sampling-based Model Predictive Control (SMPC) is a promising strategy for contact-rich robotic manipulation, combining gradient-free optimization with massively parallel GPU simulation. Yet, most prior work relies on simplified dynamics or remains confined to simulation. We present an MPC framework that leverages JAX for large-scale parallelization and efficient computation, coupled with the high-fidelity MuJoCo MJX simulator, and deploy it on a Franka Research 3 executing the Push-T manipulation task through a complete real-to-sim-to-real pipeline. The MTP variant with structured global sampling outperforms unimodal baselines such as CEM, MPPI, and PS across tasks that require mode switching, both in simulation and on hardware. Furthermore, we evaluate online domain randomization within the MPC sample budget, showing that contact-initiation parameters yield interpretable adaptation signals, whereas global physics parameters provide feedback that is too weak for reliable exploitation at typical replanning frequencies. These findings highlight key challenges for sampling-based MPC in contact-rich manipulation-contact sensitivity, tight compute budgets, and the difficulty of obtaining informative domain-randomization signals in real time.

Finite-horizon optimal-control computations repeatedly solve two-point Pontryagin boundary value problems whose conditioning can deteriorate as the horizon grows. We give a verifiable data-level certificate under which it does not. Hyperbolicity of the reduced state--costate transition matrix, together with scaled stable--unstable boundary transversality, yields an endpoint-corrected Green inverse with horizon-independent constants and weighted contractions transfer this inverse to the nonlinear problem, so the original Pontryagin endpoint rows $x_0=x_{\rm in}$ and $p_T=r_x(x_T,y)$ carry a unique local stationary branch whose first-order expansion and Lipschitz constants are uniform in the horizon. Consequently the finite-horizon feedback map is horizon-uniformly Lipschitz, first-order expandable, and satisfies an exact shrinking-horizon consistency identity. Symplectic and Riccati criteria certify the hypotheses from matrix data: every stabilizable definite linear-quadratic system with invertible dynamics and a locally concave terminal Hessian at the reference qualifies. Reproducible computations illustrate both certificates.

In skill-constrained production-inventory systems, the qualified human capacity available tomorrow depends on training decisions made today: production requires certified workers, certifications decay unless maintained, and training consumes the same scarce worker hours that production needs now. We study a closed-loop skill-constrained model predictive controller that, at every shift, solves a finite-horizon mixed-integer program over production, inventory, backlog, and training, with binary predicted certification, hard production eligibility, and an interpretable terminal value that prices certified-capacity gaps at the horizon boundary; only the first-period action is applied before replanning. On synthetic, seed-controlled SkillChain-Gym scenarios - announced and surprise new-skill shocks, demand shocks, absenteeism, forecast- and availability-quality modes, capacity-boundary and training-rate sweeps, and negative controls - we evaluate the controller against production-only and maintenance-only ablations, static cross-training insurance plans, and a strong reactive heuristic, under an ex-ante locked configuration and paired statistics. The result is regime dependence, not superiority: no policy class dominates. Predictive control helps when skill or labor bottlenecks are forecastable early enough for training to complete; lean static insurance remains hard to beat under surprise shocks, near the demand-capacity boundary, and wherever pre-shock slack makes insurance cheap. Attribution ablations separate certification maintenance, re-acquisition of lapsed certifications, and greenfield skill acquisition. Forecastability, not adaptivity per se, decides when predictive control pays.

The well known phenomenon of exploding and vanishing gradients in deep neural networks is analyzed using multiplicative ergodic theory. The effect of adding a residual connection is explained in this context. Specifically, a characterization of Liapunov exponents due to Furstenberg and Kifer is exploited in order to make a precise statement about the Liapunov spectrum and the effect of residual connections on it.

We study the operator-theoretic core of Q-learning in continuous-time stochastic control with continuous states and actions. In value-based reinforcement learning, each Q-learning or DQN update is built from a Bellman optimality target; our analysis isolates this target in a diffusion setting and studies its regularity and approximation complexity. Under uniform ellipticity and Hölder-regular coefficients, we show that a Bellman update maps bounded inputs into an anisotropic regularity class, smoothing the state variable while leaving only Lipschitz dependence on the action variable. This yields a compact family of Bellman iterates and motivates a tensor-product DeepONet architecture adapted to the mixed regularity of the problem. We then derive explicit approximation and resource bounds, together with a stiffness--complexity trade-off as the time step $δ\to 0$. The resulting theory makes a direct contribution to Q-learning theory at the level of Bellman target regularity and approximation in continuous stochastic control. At the same time, we do not claim a full convergence theorem for practical sampled Q-learning with exploration, replay, and stochastic gradient updates.

Neural ordinary differential equations (neural ODE) gained attention in safety critical settings such as continuous-time controllers for cyber-physical systems and classifiers integrated into automated decision pipelines, raising the question whether their behavior can be formally verified. Existing tools dedicated to neural ODE provide only a single reachability call without iterative input-set refinement, limiting the precision of their verdicts to whatever one reachability call can deliver. We present TNODEV, the first formal verifier for neural ODE that integrates a falsification checker, a fast interval-based reachability backend based on continuous-time mixed monotonicity, a verification and refinement loop with three input-set splitting heuristics, and a parallel scheduler in a single end-to-end pipeline. TNODEV supports safe-set inclusion verification on pure neural ODE, neural ODE in closed loop with a neural network controller and general neural ODE (GNODE), with the safe set specified either as an interval or as the half-space intersection induced by a target classification label. We evaluate TNODEV on a range of benchmarks across safe-set inclusion and classification-robustness properties, including a direct reachability comparison against NNV 2.0 and CORA and a verification comparison against NNV 2.0 on MNIST general neural ODE classifiers.

Robotic systems routinely encounter conflicting objectives, modeling errors, and degenerate contact conditions that render quadratic programs (QPs) infeasible. Yet most optimization solvers and differentiable QP layers assume feasibility, leading to numerical failures, unstable gradients, or solver breakdown when constraints cannot be simultaneously satisfied. We present Elastic ODYN, a primal--dual non-interior-point QP solver that handles infeasibility through smooth squared-$\ell_2$ elastic relaxations. The resulting formulation remains well posed under ill-conditioning and degeneracy, supports warm starting, and converges to closest-to-feasible solutions when no feasible point exists. A lightweight refinement stage recovers physically meaningful dual variables from the elastic solution. Building on this framework, we develop Elastic OdynLayer, a differentiable QP layer with stable gradients under infeasibility, and Elastic OdynSQP, an infeasibility-aware SQP method that resolves inconsistent subproblems and intrinsically infeasible optimal control tasks through selective constraint relaxation. We evaluate the framework on benchmark QPs, singular contact mechanics, differentiable parameter identification, and quadrupedal and humanoid trajectory optimization. Across all settings, Elastic ODYN consistently outperforms state-of-the-art elastic QP solvers in robustness, warm-start performance, and convergence reliability, enabling optimization, simulation, control, and learning beyond the feasibility assumptions of existing methods.

Humanoids deployed in human-centered environments must handle force-interactive tasks, where external contacts introduce unexpected disturbances that disrupt locomotion accuracy and stability. Existing learning-based approaches rely on broad domain randomization, task-specific force objectives, or learning-based force estimators from motion history, each of which compromises accuracy, task transferability, or out-of-distribution (OOD) robustness. We present Analytical Disturbance-Aware Policy Training (ADAPT), a framework that equips humanoid policies with a physically grounded disturbance observer. The core of ADAPT is an analytical whole-body disturbance observer that estimates residual force/torque online with the accessible robot dynamics, without requiring force/torque sensors. Fed directly into the policy, the estimated disturbances give the humanoid an explicit, physics-derived sense of external force/torque that can generalize across diverse unseen scenes. Experiments on a Unitree G1 humanoid show that ADAPT achieves accurate disturbance prediction and stronger robustness than a proprioception-only baseline under torso perturbations, standing pushes, and asymmetric hand payloads, with improved velocity tracking even on OOD disturbances. Moreover, ADAPT enables penalizing inferred disturbances at lower-body joints to encourage lighter locomotion.

Agent-based models are widely used to evaluate policy interventions in complex socio-technical systems, yet many policy-oriented ABMs represent regulation as a fixed scenario parameter. This limits their ability to distinguish whether regulatory conclusions depend on agent adaptation, policy adaptation, or the interaction between both. Building on a previously proposed four-regime architecture, this paper contributes a controlled simulation benchmark rather than a new general framework. Using a single configurable emissions-regulation ABM, we compare constant policy/constant agents, constant policy/adaptive agents, adaptive policy/constant agents, and adaptive policy/adaptive agents under matched simulation conditions. We evaluate naive fixed policies, tracking-aware calibrated fixed policies, and three adaptive controllers: setpoint, safety-margin, and one-sided control. The benchmark recovers expected controller archetypes: setpoint control tracks the cap but produces frequent boundary crossings, safety-margin control reduces violations through conservatism, and one-sided control can limit violations but may ratchet toward over-conservatism when combined with adaptive agents. The contribution is methodological: scalar indicators, cap-relative symbolic diagnostics, trajectory motifs, and visual inspection jointly reveal how regulatory conclusions can differ even when average outcomes appear similar. Adaptive policy-oriented ABMs should therefore be evaluated through regime distinguishability, not only through average performance.

Robots deployed in the real world must plan motions across diverse scenarios without per-scenario retuning. End-to-end reinforcement learning (RL) can generalize across scenarios but often becomes brittle under distribution shift, reward misspecification, and stochastic interactions. Model predictive path integral (MPPI) control enables strong real-time refinement without gradients, but its performance depends on a well-shaped sampling prior, while manually designing the priors does not scale to multi-scenario deployment. We present HOLO-MPPI (High-level Offline, Low-level Online MPPI), a multi-scenario motion planning framework that combines high-level policy learning with low-level stochastic optimal control. Offline, we learn a high-level policy that proposes scenario-robust plans in an abstract action space, with a learned world model for online rollout. Online, the policy serves as a data-driven prior generator that parameterizes MPPI's sampling distribution conditioned on the current observation and goal. MPPI then optimizes low-level control sequences around this prior in real time to adapt to local disturbances. We instantiate HOLO-MPPI in autonomous driving by designing an effective high-level action space and tailored model architectures. Our evaluation across diverse driving scenarios shows that HOLO-MPPI improves upon MPPI and end-to-end RL baselines while maintaining real-time control.

This paper studies safe distributed consensus for single-integrator multi-agent systems over connected undirected graphs under simultaneous asymmetric actuator constraints and output safety constraints. Each agent is equipped with a continuously differentiable asymmetric actuator dynamics that maps a commanded control signal to the realized plant input while keeping the latter strictly inside a prescribed admissible interval. To address output safety, a barrier-coordinate transformation is introduced over a common time-varying safe interval, and a distributed synchronization law is designed in the transformed coordinates. The resulting controller integrates a graph-based coordination layer with an actuator-side tracking layer, thereby enabling simultaneous enforcement of input admissibility, forward invariance of the safe output set, and asymptotic synchronization. For compact admissible sets of initial conditions, it is shown that the closed-loop solution is complete, all signals remain bounded, the actuator inputs remain strictly within their asymmetric bounds, and the agent outputs remain inside the prescribed safe interval for all time. Moreover, the transformed synchronization errors converge exponentially to zero, and the original agent outputs asymptotically synchronize to a designer-selected admissible trajectory embedded in the common safe interval. Numerical simulations validate the proposed framework and demonstrate safe consensus under both asymmetric actuation bounds and time-varying output constraints.

Residential battery energy storage systems (BESS) are increasingly deployed alongside photovoltaic (PV) generation to reduce household energy costs under volatile time-of-use (TOU) tariffs. Model predictive control (MPC) is a widely adopted optimisation strategy for home energy management systems (HEMS), typically formulated to minimise net energy cost, subject to physical and operational constraints. However, battery degradation is rarely embedded in the optimisation objective, meaning its cost is unquantified and aggressive; high-cycle-count strategies could incur significant losses once deployed to physical systems. This paper presents a receding-horizon mixed-integer linear programming (MILP) baseline for a UK residential HEMS, using demand data from the REFIT dataset. A 3 by 3 sensitivity study is conducted across three battery sizes and three PV array sizes, with post-hoc degradation cost estimated using the Naumann stress model and rainflow cycle counting. Results show that degradation remains constant for each battery size and can exceed energy cost savings by up to 1,060 %. These results demonstrate that energy-cost-only optimisation systematically underestimates the true system cost, motivating a degradation-aware control formulation.

We introduce $λ$-Reachability, a scalable approach to Hamilton--Jacobi safety analysis for high-dimensional robotic systems. Unlike prior discounted formulations that rely on fixed one-step Bellman updates, $λ$-Reachability employs a stochastic multi-step estimator of the safety value, using a geometrically distributed rollout horizon together with a randomly absorbed terminal. Conceptually analogous to TD($λ$), $λ$-Reachability interpolates between local self-consistency updates and long-horizon max-over-trajectory safety targets via an interpretable horizon-control parameter. Unlike TD($λ$), where the terminal value is always incorporated in learning targets, the terminal safety value in $λ$-Reachability is only used at a probability controlled by parameter $δ$. We formally show that for $δ<1$, the update induces a contraction mapping that allows temporal-difference learning; as $λ\to 1$, the estimator recovers the undiscounted reachability objective. We apply $λ$-Reachability to high-dimensional safety learning problems with both simulated and real humanoid robots under balance and collision avoidance constraints. Experimental results demonstrate that $λ$-Reachability significantly improves both safe-set boundary classification and safety margin estimation compared to single-step temporal-difference baselines.

This paper addresses timbral ambiguity in instrument timbre transfer under fine-grained structural conditions. We argue this issue stems from instrument-specific expressive details in these conditions, which conflict with the target timbral properties. For example, imposing a violin's pitch-dominant vibrato contours onto a flute, which naturally exhibits loudness-dominant vibrato, impairs timbral fidelity. We propose AdaTT, a target-adaptive system that ensures high timbral fidelity across diverse timbre transfer scenarios within the ControlNet scheme. It selectively scales the frame-wise influence of pitch and loudness controls via text prompts to match the target instrument's identity. We also present a semi-automatic data construction pipeline to teach the model which expressive details to transform or preserve. Results show AdaTT achieves superior timbral fidelity and naturalness while retaining score-level content. Audio samples are available at https://dabinkim0.github.io/adatt/.

We present SLS^2, a framework for safe feedback motion planning from pixels using robust model predictive control (MPC) in learned latent world models. Our approach trains an action-conditioned joint-embedding world model with compact Markovian latent states, enabling efficient gradient-based trajectory optimization through learned latent dynamics. To enforce safety for the true system despite imperfect latent predictions, we inform a GPU-accelerated system level synthesis (SLS) robust MPC scheme with conformal prediction to obtain calibrated latent error bounds and robust latent-space constraint sets. We further learn and conformalize a latent constraint checker, allowing the SLS planner to impose probabilistic safety constraints during closed-loop execution. We evaluate our method on vision-based control tasks, where it improves both goal-reaching performance and safety over latent world-model and safe-planning baselines.

Robotic systems deployed in uncertain and dynamically changing environments often face variations in contact conditions, aerodynamic effects, and external disturbances that challenge reliable control. To remain effective under model-based control, these systems require dynamics models that can adapt to such changes, especially when direct access to complete environmental information is limited. To enable adaptability and facilitate integration with model predictive control, we propose a context-aware dynamics model based on neural ordinary differential equations, which infers environmental factors from state-action histories using a two-phase training procedure. We validate the approach across diverse robotic platforms, including a quadrotor in simulation, as well as a Sphero BOLT robot and a Fanuc manipulator in real-world experiments. The results demonstrate that our method effectively adapts to temporally and spatially varying environmental changes across different tasks. Videos are available at https://youtu.be/PY0sNyF2rqE , and the source code is available at https://github.com/syyu410-yu/context-aware-neural-ode-control.git .

Conformal prediction (CP) has been used to obtain probabilistic bounds on the error between a learned dynamics model and the true but unknown system. Such CP bounds can then be embedded into robust control Lyapunov function (CLF) and control barrier function (CBF) frameworks. However, such an approach does not retain stability/safety guarantees because of the distribution shift between the closed-loop trajectory distribution under the deployed CLF/CBF policy and the trajectory distribution from which the CP bound and its guarantees were derived. To address this issue, we propose an episodic framework that iteratively updates the robust conformal CLF/CBF policy while maintaining stability/safety guarantees across episodes. We achieve this by (1) using adversarially robust conformal prediction, and (2) quantifying a distribution shift budget that allows us to control how much the model error can increase across policy updates. This distribution shift budget is derived via a closed-loop trajectory sensitivity analysis, yielding an implicit and an explicit update rule for the CP bound. We analyze convergence of our algorithm, which we demonstrate on three case studies. To the best of our knowledge, these are the first results that provide stability/safety guarantees for robust conformal CBF/CLF policies.

Diffusion models have emerged as powerful tools for planning and control by learning multimodal distributions over actions and trajectories. Yet reliable inference-time safety enforcement remains a key barrier to their deployment in safety-critical tasks. Existing approaches typically project each denoising iterate onto the feasible set, even though constraints are defined only on the final clean trajectory. Enforcing feasibility on noisy intermediate samples can therefore overconstrain the sampling dynamics, substantially degrading sample quality. To address this limitation, we introduce DiRecT (Diffusion-based planning via Receding-horizon denoising with Terminal constraints), a training-free algorithm for constrained sampling from diffusion models via stochastic optimal control (SOC). DiRecT enforces constraints only on the final clean sample, avoiding unnecessary restrictions on the intermediate denoising dynamics. Inspired by model predictive control, we derive a principled receding-horizon surrogate for the otherwise intractable constrained SOC formulation, yielding an efficient algorithm that cleanly separates stochastic denoising from constraint satisfaction, progressively steering samples toward feasible final trajectories without distorting the learned diffusion dynamics. Furthermore, DiRecT is highly flexible: it can leverage off-the-shelf or domain-specific optimizers, incorporate priors over environment dynamics, and optimize additional soft rewards. Extensive experiments on safe planning benchmarks demonstrate that DiRecT substantially improves deployment safety and task performance over existing diffusion-based planning baselines.

This work presents a transparent and reproducible benchmark study of a direct dual-network Physics-Informed Neural Network (PINN) formulation for the optimal control of a mass-spring-damper system. The classical linear-quadratic optimal control problem is solved by two independent classical methods -- Pontryagin's Minimum Principle with single shooting, and direct transcription through trapezoidal collocation -- and recast as a constrained optimization problem solved by two feedforward neural networks: a state network whose boundary conditions are enforced exactly through a composite cubic-and-mask ansatz, and an unconstrained control network. The composite loss combines the physics residual at the collocation points with a trapezoidal approximation of the cost functional, weighted by a single scalar hyperparameter. On the benchmark considered, the PINN reproduces the classical optimal cost to four significant digits, satisfies the terminal state constraints exactly by construction, and produces pointwise state and control errors that fall within the spread of the two classical references. Training is approximately two orders of magnitude slower than classical shooting on this benchmark, which is honestly reported. The contribution is methodological clarity rather than methodological novelty: the formulation and the accompanying Google Colab implementation are intended to lower the barrier to entry for practitioners exploring PINN-based optimal control without prior exposure to adjoint methods or two-point boundary value problems.

Control-function instrumental variable estimators need a first-stage residual, not merely a first-stage prediction. High-capacity first stages can interpolate treatment and leave too little residual information for the outcome equation. We study Adaptive Anisotropic Instrumental Heat Flow (A-IHF), a deterministic graph-diffusion residual extractor for flexible control functions. A-IHF treats treatment as a signal on a graph of first-stage features, uses pilot diffusion to detect large treatment jumps, attenuates conductance across those jumps, and computes the generated control with a sparse graph resolvent. Its observational selection rule uses only $(Z,X)$, combining graph generalized cross-validation, roughness, residualized-treatment relevance, and graph-admissibility filtering. The analysis decomposes error into structural leakage, residual attenuation, and residualized treatment variation, yielding finite-sample bounds, graph-admissibility rates under latent piecewise-smooth geometry, and finite-path selection calibration. Across 54 synthetic benchmark cells with tuned graph, kernel, tree, boosting, series, and neural control-function baselines, guarded observational A-IHF has the lowest average structural-response MSE; the A-IHF family beats the best non-A-IHF baseline in 32 cells. Performance is strongest when the graph captures piecewise-smooth first-stage structure.

Safe physical human--robot interaction on floating-base robots requires interaction regulation under changing contact constraints. We develop a contact-consistent normalization in which the residual end-effector channel is represented as a linear double integrator in acceleration coordinates. Both discrete prediction matrices are independent of configuration and support mode; posture and contact enter only through task-inertia force recovery and constraints. The controller combines a constant-Hessian receding-horizon QP, an acceleration-disturbance observer, and a priority-consistent realization. Classical operational-space impedance is shown to be the unconstrained infinite-horizon limit. MuJoCo experiments on a 17-DOF biped and a Menagerie-derived Unitree G1 model evaluate sustained forces, transmitted shocks, and scheduled contact-model changes. The observer sustains near-offset-free tracking across a genuine contact-set switch and a scheduled support-mode transition, while disturbance estimation---not contact consistency alone---is the dominant source of fixed-stance accuracy; covariance inflation gives only scenario-dependent transient benefit.

Population-based and distributional optimization methods, from evolution strategies and consensus-based optimization to covariance-matrix adaptation and stochastic gradient methods viewed as distributional dynamics, are widely used for nonconvex or black-box problems, yet their convergence analyses remain fragmented across algorithm-specific techniques. We introduce an operator calculus in which a broad class of such methods, after choosing an appropriate state space and, where necessary, augmenting the state by memory or strategy variables, is described as a composition of three elementary operators (mutation, selection, and recombination) acting on probability measures. Under explicit stability and regularity conditions, the composite operator admits a pre-generator whose continuous-time limit is a transport-reaction-jump (TRJ) PDE that preserves the operator splitting. On this foundation we establish a modular Lyapunov principle. If a state-space Lyapunov function both dissipates under the full generator and controls the relevant search-space gauges, then the state-space Lyapunov functional and the induced search errors decay exponentially. The additive generator structure allows dissipation estimates to be assembled operator by operator, providing a toolkit for certifying convergence of composite mean-field algorithms.

Accurate and computationally efficient vehicle models are essential for motion planning of autonomous vehicles, where positional accuracy directly affects trajectory feasibility and safety. However, the positional accuracy has not been systematically evaluated against real measurements. Therefore, this paper compares the short-horizon positional accuracy of three single-track vehicle models against vehicle measurements across various driving maneuvers. Model parameters are identified through dedicated experiments with the instrumented test vehicle. Rather than identifying a single best model, this work aims to provide insight into the trade-offs between model complexity, parameterization quality, and positional accuracy for informed model selection in Model Predictive Control applications.

We present CORD-SLS, a real-time control method for safe deformable object manipulation, with a focus on ropes and cloth. At its core is a GPU-parallel differentiable simulator with contact smoothing which enables efficient gradient-based planning through intermittent contact. To robustly satisfy constraints under model and sensing uncertainty, we develop a real-time, GPU-parallel output-feedback robust model predictive control (MPC) algorithm that plans with this simulator. We further show that the simulator accelerates model-based RL for training neural manipulation policies. To improve real-world robustness, we use conformal prediction to calibrate visual-feedback and perception-error bounds for MPC, producing reachable tubes that enable high-probability safe control. We evaluate CORD-SLS on high-dimensional, contact-rich rope and cloth manipulation tasks in simulation and hardware, including obstacle avoidance, routing, folding, and smoothing. Across settings, CORD-SLS achieves millisecond-speed planning, exceeding baselines in safety, speed, and task success.

We study the sample complexity of learning in average-reward weakly-coupled Markov decision processes (WCMDPs) and Restless Bandits (RBs) under a generative model. Naive reduction to a tabular MDP leads to high complexity bounds as the state-action space is exponentially large in the number of arms $N$. By exploiting the weakly coupled structure, we show that near-optimal policies can be learned with sample and computational complexities that are polynomial in $N$. Specifically, we analyze the plug-in approach, which applies an efficient planning algorithm to an empirical model estimated from data. For fully heterogeneous WCMDPs, we establish the first finite-sample PAC guarantee with polynomial complexity and an $O(1/\sqrt{N})$ optimality gap. For homogeneous RBs, we further prove that a smaller optimality gap is achievable under mild structural assumptions. A primary technical contribution of our work is a novel Lyapunov-based analysis framework. Unlike classical approaches that rely on the difficult-to-control bias function, our framework uses an explicitly constructed Lyapunov function along with a drift transfer technique between the true and empirical models. A key step of independent interest in our framework is a fine-grained perturbation analysis for the underlying linear programming (LP) relaxation, which provides a general tool for analyzing LP-based policies and weakly-coupled systems.

Many materials and chemical systems exhibit history-dependent responses, where functional outcomes are governed not only by final-state variables but by the time-dependent sequence of fields, temperatures, or chemical potentials applied during operation. Discovering new processing protocols is therefore a high-dimensional search problem in which the control variable is an entire waveform or sample history, and conventional strategies either remain confined to conservative interpolative families or become prohibitively measurement intensive. Here, a closed-loop workflow is introduced that couples evolutionary search over a compact waveform representation with uncertainty-aware deep kernel learning to generate, rank, and experimentally validate candidate protocols. Applied to ferroelectric thin films, with the scanning-probe tip-bias waveform as the protocol and the nonlinear electromechanical response as the reward, the workflow discovers waveform families that enhance nonlinearity by de-aging the film. Spatially resolved before/after measurements show that the best-performing waveforms selectively activate pre-existing, weakly pinned domain-wall segments, whereas the worst drive long-range irreversible switching. This framework reframes protocol tuning as out-of-distribution discovery, generalizable to synthesis and annealing trajectories, battery formation protocols, and other high-dimensional control problems.

Nonlinear dynamics and the strong couplings that arise between multiple effectors undermine the assumptions behind conventional, linear control allocation techniques. When flight enters regimes where nonlinear effects dominate, linear allocators exhibit reduced accuracy due to increased model mismatch, which subsequently degrades performance and robustness of the flight control system. High fidelity onboard models and black box data driven approaches can recover accuracy across the flight envelope, but respectively impose computational burdens prohibitive for real time allocation and sacrifice the interpretability required for verification and fault diagnosis. This paper addresses these limitations by learning an explicit, physics constrained analytical model of the control effectiveness mapping from representative flight data using Sparse Identification of Nonlinear Dynamics. The resulting mapping is compact, interpretable, and admits analytical derivatives, enabling efficient computation within nonlinear solvers that additionally incorporate actuator dynamics, without requiring an onboard model. An online adaptation mechanism monitors prediction residuals and refreshes the model when significant plant changes are detected, providing graceful reconfiguration under actuator failures and varying operating conditions. The methodology is evaluated on a high fidelity nonlinear benchmark aircraft across a range of aggressive maneuvers, achieving accuracy comparable to a full nonlinear onboard model while substantially reducing computational cost relative to established baselines.

Safe rehabilitation is an interaction-dynamics problem: the controller must regulate a prescribed motion while absorbing involuntary spasm, voluntary effort, actuator compliance, and model mismatch as interaction disturbances. This paper instantiates the predictive interaction-dynamics framework of the base pHRI formulation on a series-elastic-actuated knee joint. SEA feedforward reduces the gravity-compensated knee to the same constant-coefficient scalar double integrator used in the base framework, while a dynamic-residual measurement from spring deflection supplies an interaction-disturbance observation. A steady-state target converts the estimated disturbance into a cancelling input, and a finite-horizon quadratic program regulates deviations from that target under range-of-motion, torque, and velocity constraints. The evaluation is stiffness- and damping-matched so improvements cannot be attributed to higher impedance. Under a motion-opposing $15\unit{Nm}$ step, classical impedance and MPC without estimation produce about $500\unit{mrad}$ steady-state error, whereas Kalman-augmented interaction MPC reduces this to $1.17\unit{mrad}$ at 100Hz and $0.70\unit{mrad}$ at 500Hz; the 500~Hz peak is $7.27\unit{mrad}$. In 30 randomized trials, the 95th-percentile peak is $21.57\unit{mrad}$. Bounded Assist-as-Needed scheduling, a corrective-channel energy tank, inequality-constrained OSQP stress cases, direct MuJoCo execution, and a posture-clamped MyoSuite knee-slice run are implemented. The results support the SEA-knee instantiation of the interaction-dynamics framework while separating it from clinical intent recognition, full-system passivity, safety certification, hardware trials, and free-standing multi-joint validation.

In this work we investigate the role of neural architectures as implicit functional priors in control problems governed by ordinary differential equations. Rather than focusing on highly complex problems, our objective is to investigate architecture-dependent effects in controlled dynamical systems within the simplest physically interpretable settings possible. In particular, we study a controlled linear RLC electrical circuit and a nonlinear Duffing-type dynamical system. Both systems are analyzed first through classical optimal-control formulations and later through PINN-based approaches. We compare different combinations of multilayer perceptrons (MLPs) and Fourier-based KAN-like architectures, and analyze their influence on the resulting controls. The numerical experiments suggest that different architectural choices systematically generate qualitatively distinct controls, even under identical governing equations, loss functionals, initial and target states, training parameters and physical constraints. Significant differences appear in the spectral structure, smoothness, energy distribution, and phase-space behavior of the learned solutions. A central observation of this work is the emergence of a functional specialization phenomenon when the neural architectures are allowed sufficient freedom to shape the structure of the learned controls. More specifically, in the systems considered here, Fourier-based architectures tend to produce trajectories with richer oscillatory content, whereas smoother low-frequency-biased architectures tend to generate more regular and energetically efficient controls. This suggests that different functional components of the control problem may be handled more efficiently by different neural architectures, leading to an implicit specialization between state representation and control generation.

Underactuated spacecraft faces controllability limitations and heightened sensitivity to environmental disturbances, complicating attitude maneuvering and stabilization. Due to the lack of control authority along the underactuated axis, conventional controllers cannot directly stabilize all attitude components and therefore require reference planning strategies. Furthermore, MPC approaches remain sensitive to inertia uncertainty and unmodeled dynamic couplings, resulting in degraded tracking performance under mismatch. To address these issues, we consider a hierarchical architecture integrating three layers: (i) a nonlinear model predictive controller (NMPC) for constraint and underactuation-aware maneuver planning and nominal closed-loop stability under actuator limits; (ii) a physics-informed neural network (PINN) trained offline on simulation data to estimate residual disturbance torques, with loss terms that enforce consistency with rigid-body rotational dynamics; (iii) a Lyapunov-based supervisory safety mechanism that evaluates the learned correction online and bounds or suppresses its influence to preserve the stability properties of the baseline controller. The architecture is evaluated in a high-fidelity simulation environment modelling reaction wheel dynamics, actuator saturation, and environmental disturbances. Monte Carlo studies show statistically significant reductions in steady-state attitude error relative to standalone NMPC while maintaining robust behavior under uncertainty. The supervisory layer ensures graceful degradation to purely model-based control when the learning-based augmentation is unreliable.

Scale buys interpolation; structure buys certifiable transfer. A world model's average error does not say whether a particular rollout can be trusted, or for how long. For equivariant latent world models we give a predictability certificate: a computable region spanning configuration, horizon, and resolution. Under exact equivariance, rollout error is invariant over the monoid generated by k primitive symmetries and is certified from the k generators (Theorem A); universal orbit-flatness over equivariant targets characterizes equivariance at the function level (Lemma 2), so an unconstrained architecture cannot certify the property by construction. Approximate orbit-transfer defects propagate by the finite-time Lyapunov spectrum (Theorem B): expanding channels give a logarithmic horizon $T_j(ε)\sim\log(1/ε)/λ_j$, neutral channels accumulate recurrent defect linearly, and contracting channels accumulate a bounded nonzero floor. Exact conserved charge values are certified to all horizons only at zero defect; with one-step defect $η$, charge-value error grows at most as $Tη$. Empirically, on a 40-dimensional learned model a $\mathbb{Z}_N$-equivariant network recovers the full Lyapunov spectrum ($R^2=0.98$-$0.99$) where dense and recurrent baselines fail. A cone/adapted-metric certificate reads an a-priori horizon off the model's own Jacobian, tight on uniformly hyperbolic dynamics and self-abstaining elsewhere; the resulting horizon improves a budgeted re-observation decision. For public non-equivariant world models the tangent spectrum gives a training-free candidate horizon, paired with a held-out divergence cross-check that abstains or corrects when the learned loop over-promises.

While MPC effectively handles structured, diverse, and low-level specifications, it lacks the capability to dynamically incorporate high-level contextual information such as social norms, user intent, or natural language instructions. To address this limitation, this manuscript introduces an agentic MPC framework that enables context-aware, semantically adaptive control synthesis by integrating with large language model-based agents. The agent interprets heterogeneous inputs, including natural language messages, environmental observations, and external knowledge, to resynthesize the control specifications. The effectiveness of the framework is demonstrated in an autonomous driving scenario, where the system aligns with personal preferences or responds to social situations such as emergency vehicle yielding.

Diffusion models provide expressive data-driven priors for Bayesian inverse problems, but many diffusion posterior samplers rely on heuristic guidance approximations that can fail for nonlinear operators and multimodal posteriors. In this work, we develop a stabilized path-space framework for diffusion-based posterior sampling. Starting from a base diffusion process whose terminal marginal represents the prior, we define a likelihood-weighted target measure on trajectories and cast posterior sampling as learning a controlled stochastic process whose path measure matches this target. This formulation connects diffusion posterior sampling to stochastic optimal control while preserving the Bayesian structure needed for uncertainty quantification. We introduce a time reparameterization that makes the path-space control problem well posed by removing the bias induced by the unknown initial value function, without auxiliary training. We then learn the control via a trust-region path-space optimization method with log-variance objectives. The path-space perspective also unifies our learned control approach with existing guidance-based samplers, quantifies the sampling error induced by approximate controls, and yields importance sampling corrections for asymptotically exact posterior expectations. We evaluate the proposed framework on a suite of benchmark inverse problems with analytically characterized or high-quality reference posteriors, enabling principled assessment of sampling accuracy and uncertainty quantification. These experiments provide insight into the behavior of diffusion-based posterior samplers and demonstrate improved accuracy and robustness over leading approaches.

Autonomous surface vehicles offer an efficient solution for environmental cleanup as well as search and rescue operations in open waters. Targets in these settings drift continuously, so efficient search must balance exploration of unobserved regions with tracking of known targets. However, most target tracking and pursuit scenarios consider simple guidance behaviours and short-term predictions for decision-making. In this letter, we address the problem of search and capture of multiple drifting targets, such as litter, in dynamic environments, using a hybrid planning framework. A key aspect of our strategy is a spatiotemporal informative planning method based on model predictive path integral (MPPI) control, a sampling-based model predictive control approach. The planner directly generates kinematic-level commands by optimising continuous trajectories over long horizons. A multi-objective cost balances search and tracking objectives while ensuring safe, feasible trajectories. In the interception stage, we switch to a pure pursuit guidance controller for the physical capture of moving targets. Experiments show that our planner outperforms the chosen planning baselines. Finally, we validate our approach in field trials with an ASV.

In this paper, we develop a continuous-time model-free reinforcement learning algorithm to learn deterministic equilibrium policies in general time-inconsistent control problems. Utilizing the extended Hamilton-Jacobi-Bellman system, we recast the original time-inconsistent problem into an equivalent two-stage problem. In the first stage, for given auxiliary functions, we employ the deterministic policy gradient approach to learn an optimal policy in an auxiliary time-consistent control problem. In the second stage, given the updated policy, we exploit the inner fixed point iterations and some martingale characterizations to learn the auxiliary functions. As a theoretical contribution, we provide some mild model assumptions and establish the convergence of inner fixed point iterations. By repeating this actor-critic style of iterations across two stages, our algorithm aims to learn the equilibrium under different sources of time-inconsistency in a unified manner. The superior effectiveness of the proposed algorithm are illustrated in two classical financial applications with time-inconsistency: mean-variance portfolio management and optimal tracking portfolio under non-exponential discounting.

In this paper, we consider a class of networked systems comprising an interconnected set of linear subsystems, disturbance inputs, and performance outputs. Using dissipativity theory, we first propose a model-based hierarchical control design strategy to ensure the closed-loop networked system is dissipative from its disturbance inputs to performance outputs. This involves designing local controllers for each subsystem to enforce local dissipativity guarantees, which are then exploited to co-design distributed global controllers and the interconnection topology to enforce global dissipativity guarantees while optimizing interconnection topology costs. The overall design process requires only solving a sequence of linear matrix inequality (LMI) problems, thereby retaining compositionality and decentralizability while avoiding non-convex, iterative design processes that are inefficient and centralized. This model-based hierarchical control design strategy assumes the knowledge of the subsystem dynamics, which may not hold in many real-world networked systems. Motivated by this, we also propose a data-driven hierarchical control design strategy that assumes only the availability of rich input-state-output trajectory data from the subsystems. The proposed data-driven design process assumes that the unknown disturbances affecting the subsystem dynamics are bounded by a quadratic matrix inequality (relaxing conventional bounds) and accounts for this by using the matrix S-lemma. Finally, the effectiveness of the proposed model-based and data-driven hierarchical control designs is illustrated for a networked system representing a DC microgrid, with the aim of enforcing robust (dissipative) voltage regulation and current sharing.

Reusing a held-out benchmark adaptively should, in principle, invite overfitting. Yet benchmark-driven machine learning (ML) has produced surprisingly little overfitting in practice. An attractive hypothesis is that successful ML strategies are highly compressible. We study this in the setting of LLM-driven research agents, where the hypothesis becomes directly testable via two complementary information bottlenecks. In \emph{output compression}, an exploration agent adaptively searches for high-performance models using a validation set, and we test whether a fresh ``reproducer agent'' can reproduce its performance given only an extremely short prompt and the training data. In \emph{input compression}, the explorer receives only one-bit feedback indicating whether each submitted model improves on the running best. Across 8 datasets spanning tabular classification, vision, language modeling, diffusion modeling, and reward modeling, we find that these bottlenecks have little effect on performance: short prompts and compressible feedback are sufficient to reproduce and find high-performance models. The hypothesis is falsifiable: when we deliberately induce validation-set overfitting, the results fail to reproduce with short prompts. Taken together, our results support a description-length explanation for the lack of overfitting in benchmark-driven ML: successful strategies occupy a low-complexity region of strategy space.

Spiking Neural Networks (SNNs) coupled with neuromorphic hardware offer energy-efficient solutions for humanoid robot control. However, existing SNN-based motor control systems address bipedal locomotion and arm control in isolation, leaving integrated control of both unaddressed. We present a spiking architecture that coordinates force-based arm control and bipedal locomotion in a simulated humanoid, using the Neural Engineering Framework (NEF) and Semantic Pointer Architecture (SPA). High-level action selection between locomotor and arm control is mediated by a biologically grounded spiking basal ganglia model. We validate the system through co-simulation of Nengo, for the neural control, and Isaac Sim, demonstrating successful target reaching, continuous digit drawing, path-following locomotion, and finally, switching between walking and arm control via basal ganglia disinhibition. To our knowledge, this is the first integrated spiking controller to combine bipedal locomotion and arm control on a full-scale humanoid platform. The full spike-based implementation enables future deployment on low-power neuromorphic hardware.

Tuning controllers for strongly coupled multi-input multi-output (MIMO) industrial processes is hard: decentralized classical auto-tuning ignores loop interaction, and local numerical optimization from natural initializations stalls in the resulting non-convex cost landscape. We ask whether on-premise open-source large language models (LLMs), which keep data on-site and need no plant model, can help. On a single-loop CSTR, classical relay-feedback tuning (IAE 0.106, near the 0.102 optimum) beats an LLM tuner (0.162): for simple loops the LLM adds nothing. The picture inverts on a strongly coupled quadruple-tank with conflicting set-points, scored by a penalized cost J = IAE + lambda*TV(u) that rewards tracking without chattering actuators. There, naive relay tuning (J ~ 28.6) and naive LLM tuning (29.7) are no better than open loop (22.7), and a local optimizer from balanced starts fails in 10/10 runs. A scaffolded open LLM instead reasons about the coupling, proposes the counter-intuitive asymmetric structure, and reaches J ~ 16.9 +/- 0.2 from any start; refining it with a classical optimizer attains the smooth global optimum (J ~ 12.0, 10/10 vs. 0/10), which even applies a non-obvious negative integral correction decentralized tuning cannot. A global optimizer (differential evolution) also reaches this optimum, so the LLM is not the only route; its advantage is sample efficiency and interpretability: a usable controller in 18 evaluations (where the global optimizer is worse than open loop) plus a stated rationale. This edge grows with dimension, reaching ~6x fewer evaluations on a 3x3 plant. The behaviour generalizes across four open models, and on a benign plant the LLM offers no advantage, sharpening the boundary. We contribute a reproducible benchmark delimiting when open LLMs help in control tuning: not as optimizers, but as a sample-efficient, interpretable structural prior.

The driving behavior of autonomous vehicles is typically governed by the cost function of their motion planner, which encodes objectives such as speed tracking, smoothness, lane keeping, and collision avoidance. However, tuning the parameters that shape this cost function is a challenging task that requires technical expertise, limiting the vehicle's ability to adapt to evolving traffic scenarios or end-user preferences. This work presents a language-driven framework for adaptive cost design in autonomous driving. A Large Language Model (LLM) interprets structured scenario descriptions and natural language user queries to generate the parameters applied to a risk-aware Model Predictive Path Integral (MPPI) controller. The system incorporates a human-in-the-loop validation stage in which the proposed behavioral changes are described in non-technical language and confirmed prior to deployment. Users may additionally provide feedback either before or after deployment, enabling iterative refinement of the vehicle's motion behavior. The framework is evaluated across multiple queries in realistic driving scenarios to assess its effectiveness. Simulation results demonstrate that the method successfully induces behavioral changes that align with the intended requirements in an intuitive manner, thereby bridging the gap between intelligent vehicle control systems and end users.

Inverse Optimal Control (IOC) aims to recover the cost function that explains observed trajectories as solutions of an optimal control problem. Classical IOC formulations rely on bilevel optimization, which repeatedly solves a nested optimal control problem and quickly becomes computationally prohibitive for realistic systems. Recent projection-based approaches offer a promising alternative but suffer from numerical instability when solved with gradient-based methods due to violations of standard constraint qualifications. In this paper, we show that these difficulties stem from the geometric structure of the IOC feasible set. We demonstrate that the set of trajectories satisfying the optimality conditions naturally forms a manifold and reformulate IOC as an optimization problem on this manifold. Based on this insight, we propose a Riemannian Inverse Optimal Control (RIOC) method that projects observed trajectories onto the manifold of optimal solutions while preserving feasibility by construction. Experiments on real human arm trajectories show that the proposed method achieves comparable or better reconstruction accuracy than classical bilevel IOC while reducing computation time by about a factor of four. These results highlight the potential of geometric optimization methods to improve the scalability and reliability of IOC for robotics and human motion analysis.

Real-world robotic manipulation tasks often involve forceful interactions with the environment, such as using tools of varying weights, transporting objects with different masses, and performing contact-rich tasks like table wiping. Previous learning-based approaches typically employ imitation learning policies that output target end-effector poses tracked by low-level impedance controllers. In these systems, forceful interactions are either implicitly realized through steady-state tracking errors or explicitly commanded using wrist force/torque or tactile sensors. However, implicit approaches generalize poorly across object weights, while explicit approaches require specialized hardware and increase system complexity. In this work, we propose IMPACT, a framework that decouples these forceful tasks into task-planning and internal-model-based predictive control. Extensive simulation and real-world experiments demonstrate that the proposed framework achieves higher success rates and improved generalization to unseen object weights, as well as better safety and energy efficiency.

Autonomous race cars, such as in Formula Student Driverless, operate close to their physical handling limits. The resulting highly nonlinear vehicle behavior increases the path tracking complexity, especially on narrow tracks. Model Predictive Control (MPC) is commonly used to address this issue, a method whose performance is closely tied to the accuracy of the underlying prediction model. This paper presents a novel, real-time capable prediction model for autonomous race cars that adjusts to changing conditions by combining information from past runs and the current driving situation. Our model is divided into three consecutive submodels: a nominal Kinematic Bicycle Model, an offline Bayesian Linear Regression (BLR) model, and an online Sparse Gaussian Process Regression (SGPR) model. The proposed approach enables efficient integration of all available data without significantly increasing computational cost, ensuring high prediction accuracy and a quantitative uncertainty assessment right from the start of the run. Compared to existing approaches, an improvement in prediction accuracy of up to 57% was achieved. Further, we successfully demonstrated the practical applicability of the model within an MPC-based path tracking controller on a real Formula Student race car.

Hard safety filters are increasingly placed downstream of learned controllers to guarantee constraint satisfaction at run time. Yet a filtered controller that never violates a constraint may still have learned nothing about safety: the filter can silently repair an incompetent upstream policy, so that post-filter success measures the filter, not the policy. We argue that safe policy learning should ask who earns the safety - the policy or its protective layers - and we make this question measurable. We introduce Intervention-Aware Variational Quantum Differentiable Predictive Control (IA-VQC-DPC), which (i) trains a compact variational quantum circuit (VQC) policy under a primal-dual intervention budget that penalizes reliance on a differentiable Control-Barrier-Function (CBF) projection, and (ii) is evaluated with a safety-attribution protocol that decomposes the executed-trajectory correction into a CBF term and a deployment runtime-guard term, and stress-tests the policy with guard-off evaluation. On closed-loop, high-fidelity BOPTEST building-control emulators (5 seeds, 60 episodes per method), intervention-aware training significantly lowers the quantum policy's raw pre-filter violation and total safety-layer reliance (both p < 10^-4) with no significant energy regression; at an equal approximately 400-parameter budget the quantum policy is significantly safer and more comfortable than a matched classical policy. Guard-off evaluation confirms the improvement is policy-level and exposes a valuable negative result: a learned differentiable energy head is only safe when paired with a distribution-aware runtime guard. The attribution protocol is general beyond quantum policies and buildings.

Real-time autonomous navigation in dynamic, unknown environments remains a fundamental challenge for mobile robotics. We propose a map-free framework that tightly integrates reactive rolling-horizon planning with nonlinear Model Predictive Control (MPC). At each control cycle, a LiDAR-based Gaussian occupancy representation is constructed and used to generate collision-free trajectories via A* search, which are then tracked by a CasADi/IPOPT MPC formulation incorporating a smooth sigmoid obstacle barrier. To improve robustness to parameter sensitivity, we adopt an offline Bayesian optimization scheme based on Tree-structured Parzen Estimators (TPE), which identifies near-optimal controller parameters with respect to a composite navigation objective. In addition, a Gaussian Process surrogate is used to analyze parameter sensitivity and provide insight into the optimization landscape. The proposed framework is robot-agnostic and is evaluated on the Unitree Go2 quadruped in simulation using Gazebo, followed by deployment on the physical robot. Experimental results show that parameters tuned in simulation transfer effectively to hardware, maintaining comparable performance without additional tuning. The full system achieves up to a 90.0% navigation success rate when deployed, along with a 38.9% average improvement in the evaluation metrics across simulated environments.