Engineering

Large language models can produce engineering descriptions and structured process representations, but standards-level serialization can substantially increase the generation burden. This diagnostic study examines whether separating engineering reasoning from Data Exchange in the Process Industry (DEXPI) serialization changes where representation and engineering failures occur in constrained greenfield surface-process design for underground gas storage. We compare Direct DEXPI generation with generation of a lightweight Engineering Intermediate Representation (IR) on three cases: single-pressure injection, withdrawal and export, and dual-pressure injection. All six conditions use one fixed model snapshot, qwen3.8-max-0902, with one completed hosted generation per condition. Direct outputs are XSD-valid in 2 of 3 cases, while all 3 Engineering IR outputs are structurally valid under a minimal validator. Direct prompt inputs contain approximately 121.8k-121.9k tokens, compared with 617-699 tokens for the Engineering IR prompts. Engineering feasibility does not uniformly favor the IR: one IR output is rejected for an explicit cooling-state contradiction. The cases also reveal two distinct Direct DEXPI failure modes: engineering inconsistency and standards-level serialization failure. The observed comparison shows that, in these evaluated method bundles, deferring DEXPI serialization substantially reduces representation burden and helps isolate serialization failure, but reducing representation burden alone does not eliminate engineering inconsistencies.

When an agent writes code, the development framework becomes the control system for a non-deterministic worker. Spec-first, agent-driven frameworks have gained rapid traction since 2025; the installable ones, GitHub Spec Kit, obra/superpowers, BMAD, and GSD, and our own, all capture intent through a specification or durable planning artifacts. Since they agree on capturing intent up front, what separates them is how each enforces the engineering discipline that keeps agent-written code clean, correct, and maintainable. Every framework enforces that discipline somehow; they differ in how. We characterize three modes: enforcement by persuasion (prompt discipline the model may ignore), by front-loaded structure (strong specs, then a trusted build), and through controls the agent cannot edit (a deterministic orchestrator, human-approved gates, immutable tests, and a green result that must pass against a live, branched database). We introduce Consort, a spec-first, test-driven agent framework built on the third, enforcing that discipline through controls the agent runs inside but cannot bypass, in which a deterministic orchestrator drives separate role agents through a spec-first design lane and a test-driven build lane on a live database branch. We argue that enforcing the tests and gates in code keeps agent-written code honest and verifiable, while its specialized roles, like the human roles before them, are what make it maintainable, claims we frame as a pre-registered, testable hypothesis.

The development of generative artificial intelligence resources enables opportunities of speeding up systems and engineering design work. This contribution introduces a framework of formal operations for assembling context in LLM-based engineering design. This framework involves the assembly of modular context units, including policy prompts, reference units with persistence, and user questions with prompt vectoring. This approach enables the systematic structuring of interactions with generative models. A formal method for evaluating modelling-as-code LLM outputs is also presented, which enables the evaluation of compliance to intent from LLM answers and thereby asses the support from LLMs for systems architecture modelling.

AI-assisted programming raises distinct questions about who produces code, who feels ownership of it, and who is responsible when it fails. This research note examines these distinctions through a hypothetical enrollment failure and a selective reading of the literature. Identifying the producer of a defective expression does not, by itself, determine the duties of reviewers, release decision-makers, or service operators. Collective ownership likewise leaves those duties to be specified. The discussion then considers how quality engineering can evaluate both generated implementations and the processes that produce them. Acceptance criteria should be justified by the required service outcome, with component checks contributing evidence toward that outcome. This perspective also permits comparison with systems that perform a task without generating a separate program for it. Such substitution would change the object of authorship while leaving the service obligation intact. The note reports no new empirical results; it proposes distinctions and evaluation questions for AI-assisted software production.

Converting in-service reinforced-concrete (RC) building blueprints into simulation-ready models---structured frame representations that support deterministic FEM export and qualified-engineer review---underpins safety assessment and seismic retrofit, but the process remains manual. Direct prompting of a multimodal large language model (MLLM) over a scanned sheet is unreliable: outputs often violate engineering constraints on beam--column support, span count, or 3D continuity. We present BlueprintAgent (BPA), a constraint-triggered multimodal agent for simulation-ready frame extraction from scanned blueprints. BPA treats the MLLM as the primary reader and decision maker, with OCR and computer vision supplying localized evidence. Its central mechanism realizes engineering constraints as callable validators whose entity-level conflict reports trigger targeted MLLM revisits over the local region---an inference-time control distinct from fixed pipelines and free-form self-reflection. We evaluate BPA on 300 real scanned blueprint sheets from 20 anonymized RC frame projects, against five baselines and six ablations. BPA reaches a macro-averaged Beam F1 of 0.994, against 0.301 for single-MLLM zero-shot and 0.820 for a fixed pipeline; removing MLLM-led axis adjudication collapses Beam and Column F1 on complex multi-sheet projects. For dense technical drawings, engineering constraints are best deployed as triggers for entity-level targeted revisits rather than as post-hoc output filters.

Language-model judges now gate training data, score generations, and drive leaderboards. The judge is then a measurement instrument, resting on one rarely stated assumption: the same request, sent to the same model name, reads the same tomorrow. We audited that assumption in two preregistered campaigns with every threshold fixed in advance; neither got past validating its instrument. Across 52,988 audited request attempts, same-window repeat rankings agreed at Spearman 0.400 against a required 0.90, and byte-identical next-day replays agreed at 0.78 against a required 0.99, each time with the execution record at ceiling. Three mechanisms explain the gap: a label-to-meaning mapping that biased readouts as strongly as the signal; candidate gaps seven orders of magnitude below the instrument's own noise floor; and byte-identical inputs returning different rankings, a noise that exact-permutation readouts compound. Neither metric substitution nor sampling repaired it on the tested grid. Preregistered follow-ups bound the problem: waiting did not help on the days sampled (0.805 versus 0.800, replicated over five further days); switching providers did not help (four providers share the floor, medians 0.74 to 0.88, predicted by none of the metadata fields they expose); self-hosting on batch-invariant kernels helped only while the server was quiet; and on constructed errors with known gaps, the readout's separation tracks error type, not size. We distill the evidence into a three-level snapshot-identity ladder, eight design rules, and a reporting checklist; a pilot at roughly 2% of the study's call volume would have exposed both unreachable gates in advance. All results concern externally measured behaviour on shared serving infrastructure. On a shared endpoint, a model name is not a frozen instrument; a preregistered evaluation must measure its instrument before freezing any gate on it.

Large Language Model (LLM) agents increasingly automate multi-step engineering workflows through tool use, interpretation of intermediate results, and iterative planning. Diagnosing and resolving non-convergent power flow cases is a promising yet largely unexplored application, as it requires engineering judgment, experimentation, and decision-making within constrained action spaces. We introduce a benchmark that evaluates these capabilities across multiple LLMs and three architectures: \emph{chatbot}, \emph{single agent}, and \emph{multi-agent} systems. The evaluation covers two power grids and 46 cases per grid, each requiring one or more corrective actions to restore convergence. The benchmark defines the simulation environment, observation and action spaces, and evaluation metrics, providing a reproducible foundation for developing agentic AI systems for power system planning and operation. The code is available at https://github.com/Mansutti081/RestoreBench

Streaming-potential-mediated transport of viscoelastic fluids has attracted research attention owing to its applications in electrokinetic energy conversion and microfluidic transport. Existing analytical and semi-analytical models in published literature provide valuable physical insights, but require repeated numerical evaluations for exploring large design spaces and identifying the optimal operating conditions. In this work, a surrogate-assisted framework is developed for rapid design optimization of pressure-driven electrokinetic transport of simplified Phan-Thien-Tanner fluids in a slit microchannel. A high-fidelity numerical database is generated over a broad range of governing dimensionless parameters, which includes the zeta potential, the Debye parameter, the Dukhin number, and the viscoelastic parameter. A Machine Learning surrogate model is subsequently trained to accurately approximate the nonlinear relationship between the governing parameters and the streaming potential, while the volumetric flow rate and hydroelectric energy conversion efficiency were calculated from closed form equation by using the streaming potential predicted by the surrogate. This is coupled with a multi-objective optimization strategy to identify operating conditions that simultaneously maximize energy conversion efficiency and volumetric flow rate. The proposed methodology can significantly accelerate parametric exploration compared with repeated numerical simulations across different parameters and provides practical design guidelines for electrokinetic microfluidic devices. The study demonstrates the potential of combining computational fluid mechanics with data-driven surrogate modeling for efficient engineering design and optimization.

IT service management (ITSM) systems accumulate large volumes of heterogeneous ticket data that are difficult for sales and executive stakeholders to convert into actionable intelligence. This paper presents a sociotechnical AI pipeline, designed and evaluated following design science research principles, that transforms raw ITSM exports into a multilevel decision-support artifact. The pipeline combines LLM-based schema normalization, HDBSCAN sub-topic clustering, and hierarchical agglomerative clustering to generate executive-facing Main-topics and granular Sub-topics. A stakeholder evaluation across six artifacts and five raters from Sales Engineering and customer success roles shows that all four decision-support metrics, interpretability, actionability, trust, and likelihood of use, on average exceed 4.0 out of 5.0, with trust as the most consistent signal. The findings position ITSM analytics as an Information Systems (IS) problem of transformation, abstraction, and human-centered design.

Autonomous Unmanned Aerial Vehicles (UAVs) are complex cyber-physical systems that require the coordinated integration of flight control, navigation, perception, communication, power management, and mission-level decision-making under safety, timing, and reliability constraints. However, many autonomous UAV development workflows still rely on document-centric requirements, separated architectural descriptions, and software implementation artifacts, which can lead to ambiguity, interface inconsistencies, and weak traceability during early design. This paper presents a Model-Based Systems Engineering (MBSE) design framework for the SysML-driven development of autonomous UAVs. The proposed framework uses the Systems Modeling Language (SysML) as a formal design backbone to structure UAV development across four connected layers: stakeholder requirements, functional decomposition, logical architecture, and physical/software allocation. SysML requirement diagrams, activity diagrams, block definition diagrams, internal block diagrams, state machine diagrams, and parametric diagrams are used to capture the functional, structural, behavioral, interface, and performance aspects of the UAV system. The logical architecture is then systematically mapped to a Robot Operating System 2 (ROS 2) software architecture by relating SysML blocks to ROS 2 nodes, flow ports and connectors to topics, request-response interactions to services, and goal-oriented behaviors to actions. The framework is illustrated at the design level using representative autonomous UAV mission scenarios, including autonomous take-off, waypoint navigation, hover stabilization, obstacle avoidance, return-to-home, and emergency handling. The resulting model supports requirement allocation, interface definition, subsystem responsibility assignment, and verification planning before simulation or physical deployment.

Translating technical requirements across languages can introduce semantic drift, altering numerical constraints, polarities, modalities, or other specification-critical meaning. IDRAAK is presented as an interpretable framework for detecting such drift using a language-independent Semantic Requirement Representation (SRR), with six detection workflows evaluated, ranging from deterministic comparison to multi-agent verification and few-shot prompting. On 890 synthetic perturbations across 300 requirements from 10 engineering domains, a single LLM call with six few-shot examples achieves MCC=0.888 and F1=0.983, outperforming the evaluated structured and multi-stage alternatives. Further evaluation on PAWS-X (805 pairs, 5 languages) and XNLI (700 pairs, 7 languages) exposes complementary strengths and limitations of structured and LLM-based approaches. Deterministic SRR comparison performs strongly on technical requirements (F1=0.898) but poorly on general-domain text (F1=0.012), while structured evidence improves performance on adversarial paraphrases. Post-hoc Platt scaling further improves confidence calibration. The results demonstrate that increased agentic complexity does not necessarily improve semantic-drift detection and that simple few-shot prompting can provide a strong and efficient alternative.

Multi-agent large language model(LLM)systems are applied to structural design,yet most use one-shot generation and cannot verify their output,leaving themill-suited to safety-critical tasks.Rather than trusting LLM self-correction,thisframework injects feedback from an external physics-based verier into a closedrepair loop.The framework couples a three-layernite-element verication systemwith a dual-node loop.Node 1 turns code violations into hard repair constraints,Node 2 turns a four-dimensional quality score into safety-rst soft constraints,and a retrieval-augmented code base makes every violation traceable to a clause.Overve structure types and 44 cases,code compliance rises from 56.8%to 98.6%and the composite score from 63.8 to 71.4(p<0.000001),using about 5.8%lessmaterial.Removing either node degrades performance,and compliance does notchange detectably across the two backbone LLMs tested,indicating that it ishere attributed to the external verier rather than the model.The framework,the 44-case benchmark and all experiment scripts are released as open source forreplicability.

Continuous workpiece localization is essential for traceability and process coordination in hot forging, but direct tracking is unreliable because of extreme temperatures, surface degradation, and irregular routing. This study presents an equipment-centric framework that infers workpiece locations from handling equipment observed by multiple static 2D cameras. The framework estimates floorplan-space 3D equipment coordinates and recognizes grasp and release activities. Event-driven finite state machines validate these activities as discrete handling events and continuously update workpiece states and locations. A keypoint-guided attention mechanism integrated into a 3D convolutional neural network improves activity recognition by focusing on functionally relevant equipment regions. Evaluation in an operational hot forging factory achieved 100% event detection accuracy within a 33-second tolerance window, a mean localization error of 317.8 mm, and a mean system latency of 21 seconds. The framework connects vision-based perception with interpretable event-driven reasoning and supports visualization of workpiece transfers and quantitative analysis of equipment operations.

Agentic AI is increasingly used to coordinate planning, implementation, review, and testing in software development, yet it often offers limited transparency into its decisions and interactions. Many such systems also assume that users can effectively guide the AI's decisions and validate its outputs. This assumption poses a particular challenge for novices, who must simultaneously learn how agentic AI works, how to collaborate with it effectively, and how to evaluate its outputs critically. To address this challenge, we present \textit{AgentForge}, an immersive learning system in which novices take on one of four software-engineering roles: Task Planner, Patch Author, Code Reviewer, or Test Runner, within a multi-agent code-repair workflow. In each practice session, the novices perform their chosen role while AI agents perform the remaining three. Through role-based scaffolding and metacognitive support, AgentForge clarifies role-specific responsibilities, makes agent coordination and intermediate artifacts visible, and encourages novices to monitor and evaluate their decisions. In a study with 37 novice developers, participants achieved high task-completion rates with AI-agent support. However, interaction demands differed significantly across practices: the Code Reviewer practice required more interaction turns, reroutes, and completion time ($p_{\mathrm{adj}} = .004$) and was perceived as the most challenging. Participants nevertheless reported significant gains in their understanding of software repair and agent collaboration ($p_{\mathrm{adj}} < .001$). These findings suggest that AgentForge can help novices develop practical software-engineering skills while learning to collaborate with agentic AI more critically and effectively.

As Moore's law slows, the industry is turning to three-dimensional integration; yet in merged 3D-IC flows, routed designs expose bond-level defects with no 2D analogue, and post-route engineering change orders (ECO) remain manual, expertise-bound work. Worse, the standard edit-then-fully-reroute practice entangles a repair with router churn, so a signoff number cannot be attributed to the edit that motivated it. We present AgenticECO, an evidence-gated tool-using agent workflow for 3D-IC ECO on the open-source TaiWei flow, paired with EcoRoute, a minimal-disturbance ECO-routing layer that drives the unmodified pinned router so a repair is attributable to its edit. Across nine matched natural defect cases under identical budgets, AgenticECO clears seven versus two for both full reroute and stock repair, at 0.66% mean disturbance over cleared cases and zero clock nets touched, and a cross-backbone rerun under the same sealed contract clears all nine. Controlled studies show that the repair moves are necessary under preservation, that occupancy-aware choice buys legal landings rather than repair success, and that under tightened clocks minimal disturbance flips accept versus reject. Three preregistered visual studies localize the pixel instrument's edge to contested landing sites, and a preregistered blind diagnostic exactly restores every held-out injected defect, the only arm with zero wrong edits. Every accepted result passes routing, fresh extraction, max/min timing, DRC, and structural-equivalence gates. Code, environment, and per-episode audit artifacts are released as supplementary material.

Agents built around large language models continually accumulate interaction trajectories during deployment, yet their behavior typically remains fixed. Beyond updating model weights, these trajectories can improve the agent harness that constructs context, mediates tools, validates actions, and recovers execution. We introduce Harness-R1, the first method, to our knowledge, that makes failure-conditioned, lifecycle-wide editing of an existing executable runtime a learned capability. It post-trains a dedicated harness engineer with online reinforcement learning so that its edits are optimized for the realized task success they produce, rather than proposed by a fixed editor. A separate 9B engineer converts batches of target-agent failures into validated executable patches; fresh same-batch reruns of the frozen target provide outcome rewards, so training updates only the engineer. Cold-start supervised fine-tuning initializes this editing policy, which is then trained online with group-relative policy optimization. Across WebShop, ALFWorld, and DBBench, Harness-R1 raises vanilla Qwen3.5-9B success from 44.3% to 53.6% (+9.3 percentage points). After direct target-agent fine-tuning, a target-specific engineer raises the average further from 59.2% to 64.2% (+5.0 points); because these gains hold both before and after fine-tuning the target, Harness-R1 points toward co-evolving the harness engineer and the target agent.

Long-horizon tasks require agents to maintain coherent state and goals across nested and branching work. We call this capability goal-directed execution (GDE): the repeated application of four behaviors, namely selecting goals, constructing task-relevant state, maintaining fidelity to higher-level objectives, and verifying completion against the environment. We hypothesize that long-horizon post-training strengthens these behaviors across domains. We test this by post-training Qwen3.5-122B-A10B on 363 Long-Horizon Multi-Tool Agent (LHMTA) tasks drawn from office workflows. The collection contained no software-engineering tasks, yet the model's pass@1 improved by 5.8 points on SWE-Bench Pro. Matched trajectory analysis shows gains in all four GDE behaviors in both office workflows and software repositories. Aggregate SWE-Bench Pro statistics showed related changes in information gathering, implementation, and verification. Together, the results support a behavioral interpretation in which long-horizon post-training changed how the model organized and applied knowledge across tasks, with effects extending beyond the training domain.

Humanoid robots, with their human-like shape and multi-tasking capabilities, are well-aligned with human-dominated workplaces, like those in civil and construction engineering, where they could collaborate with human workers or autonomously perform physically demanding and hazardous tasks. Despite this promise, limited research has explored how to endow these robots with the practical capabilities needed to perform construction tasks. To this end, this study proposes a novel perception-and-action system that enables humanoid robots to learn and perform construction tasks from worker demonstrations. This system contains two deep networks: Humanoid-PoseNet, which extracts human postures and translates them into mechanically feasible poses for a humanoid robot; and Humanoid-ActionNet, which learns robot-executable actions based on these translated poses. Experimental results demonstrate that the humanoid robot reliably executed eight construction-related actions, achieving an average motion-tracking error of 82.45 mm MPJPE (Mean Per Joint Position Error). This work provides an early step toward deploying humanoid collaborators in construction.

Modern chip design relies on electronic design automation (EDA) tools that generate large, heterogeneous artifacts, including source files, scripts, logs, netlists, and reports. Analyzing these artifacts is critical for debugging, optimization, and design-flow understanding, but remains difficult because relevant evidence is often distributed across many artifact types and design stages. Although LLM agents show promise for EDA assistance, existing approaches lack public benchmarks for large-scale cross-artifact analysis and often struggle to ground reasoning in tool-generated evidence. We present EDATracer, an agentic framework for evidence-grounded EDA artifact analysis. EDATracer organizes design artifacts into a knowledge graph paired with a semantic vector index, enabling LLM agents to retrieve evidence across source files, logs, netlists, and reports. We curate an 18.9 GB dataset of 2,787 synthesizable open-source chip designs and introduce a 90-question benchmark spanning factual, statistical, and reasoning tasks. Across evaluated agents, EDATracer achieves the best pass@1 accuracy, outperforming Cursor and Claude Code by 6.4 and 7.2 percentage points on average, while using 2.0-3.2x fewer tokens.

Constructing an executable chemical-process model remains manually intensive. Chemical engineers translate underspecified requests into coupled decisions about unit operations, thermodynamics, streams, specifications, degrees of freedom (DoF), initialization, solver repair, and optimization; one error can invalidate the model. CRAFTS mirrors the staged workflow of chemical engineers by decomposing simulation building into bounded subtasks assigned to seven bounded roles, with deterministic IDAES/Pyomo gates between stages. Given a natural-language request, process flowsheet diagram (PFD) evidence, and curated chemical-engineering knowledge, Input Understanding and Intent recover requirements, constraints, and process semantics; visual, topology, and specification specialists translate them into typed simulator contracts; and Debug and Optimization support bounded repair and eligible optimization. Fine-tuning is applied to the three schema-critical visual, topology, and specification roles, while the remaining roles use untuned Qwen. The resulting VisualGraphIR, TopologyIR, SpecIR, BuildPlan, and SolveReport expose unit, port, thermodynamic, numerical, and execution decisions. Compatible constructors, property packages, and runners are attached only after semantic artifacts pass engineering gates. We introduce OpenIDAES-450, a 450-case IDAES process- simulation dataset, and evaluate the complete seven-role LangChain/LangGraph workflow through solve and eligible optimization on its frozen 82-case held-out split. CRAFTS completes the prescribed validation and execution contract for for 91.5% of cases and achieves unit, stream, and directed-connection F1 scores of 0.815, 0.791, and 0.782. These results demonstrate the effectiveness of role specialization, typed intermediate representations, and deterministic engineering gates for reliable automated process-model construction.

Construction standards are critical for building safety and sustainability. Existing standard application workflows rely on keyword-based document retrieval and manual cross-clause interpretation, which cannot reliably support multi-clause reasoning, multimodal knowledge utilization, or traceable clause-level evidence linkage. To address these limitations, this study develops a multimodal knowledge-driven framework that supports question answering on standard knowledge named BEST-KAG (Knowledge-Augmented Generation for Building Engineering STandards). The framework introduces 1) a multimodal knowledge graph (MKG) for unified representation of document hierarchy and heterogeneous standard knowledge with various connections, 2) a rule-LLM hybrid knowledge construction pipeline for scalable multimodal knowledge extraction, creating a large MAG with 251 building engineering standards, 171,652 nodes and 310,914 edges, and 3) a graph-retrieval-based knowledge-augmented generation architecture for clause-grounded and traceable question answering. Experiments demonstrate that BEST-KAG consistently outperforms multiple mainstream LLMs in terms of Expert evaluation, and metrics including BLEU, and ROUGE, with the best improvement up to 74.01% compared to the baselines.

Generative artificial intelligence (AI) has transformed text-to-image synthesis, yet its ability to represent specialized engineering domains remains largely unexplored. As an exmaple in nuclear engineering, general-purpose foundation models frequently generate physically incorrect or conceptually inconsistent images because they lack domain-specific knowledge. This work presents one of the first systematic studies of domain adaptation for nuclear text-to-image generation through fine-tuning of open-source diffusion models. We curate a dataset of 1,000 captioned nuclear energy images spanning reactors, fuel cycles, radiation, and related concepts, and use it to fine-tune three state-of-the-art open-source models: Stable Diffusion XL (SDXL), SD-v3.5-Medium, and the flow-matching Flux.1 model. Their performance is evaluated using both quantitative image-similarity metrics and qualitative expert assessment against the corresponding zero-shot models. Fine-tuning substantially improves the fidelity of SDXL, provides only limited gains for SD-v3.5-Medium, and yields no measurable improvement for Flux.1, demonstrating that adaptation effectiveness depends strongly on the underlying generative architecture rather than model scale alone. We further compare the fine-tuned models against three leading commercial systems--GPT-Image-2, Gemini-3.1-Flash-Image, and Midjourney. Although GPT-Image-2 and Gemini generate convincing images for broad nuclear concepts, they frequently fail on specialized engineering prompts, where the fine-tuned open-source models produce more accurate and technically consistent outputs. These results establish domain-specific fine-tuning as a practical pathway for developing trustworthy generative AI tools for domain-specific applications.

Recent advances in Vision Language Models (VLMs) have created new opportunities for disaster response, where responders must interpret large volumes of sensor data under time pressure. Current VLM applications include social media monitoring for situational awareness, generation of draft action plans, and translation of technical alerts into public-facing messages. While these efforts can accelerate information flow, they remain largely limited to decision-support roles. Such approaches can increase operator burden because humans must still translate outputs into coordinated actions across teams and robotic assets. This study explores the viability of embedding VLMs as coordination agents within the human-UAV loop. The proposed architecture integrates natural language interaction, mission-level task coordination, software-in-the-loop implementation, and communication aligned with the Incident Command System (ICS). Rather than functioning solely as advisory tools, VLMs facilitate communication between human operators, mission control logic, and UAV task execution. The framework was developed using a Model-Based Systems Engineering (MBSE) approach, with use case and block definition diagrams representing system roles, internal structure, and component interactions. Three key elements, the VLM Coordinator Agent, UAV Mission Control, and Task Allocator, were implemented within an integrated simulation and control environment. A preliminary human-factors evaluation with seven participants showed reduced perceived workload across mental demand, effort, and frustration, along with high ratings for AI trust and communication clarity. By integrating MBSE, software-in-the-loop testing, and human-factors evaluation, this work advances scalable human-autonomy teaming for high-stakes disaster response, with broader implications for aerospace autonomy and civil safety.

Prompts stopped being isolated strings some time ago. In real systems, one model call feeds another, retrieval interleaves with generation, routers branch, and aggregators merge parallel results. Practice converged on a single structure to hold this together: the graph. Frameworks such as LangGraph, DSPy, and Prompt Flow expose it openly, and research systems already optimize it automatically. The vocabulary, however, lags behind. Graph names, variously, a reasoning topology inside one sampling strategy, a multi-agent conversation, or an orchestration artifact, while prompt engineering still evokes writing one good string. What is missing is a reference definition treating prompts as nodes of an explicit, executable, improvable graph. We build that definition through conceptual analysis over sources with persistent identifiers, complemented by primary grey literature. We reconstruct the genealogy of the idea, from dataflow graphs and build systems, through prompt chaining and the thought topologies (chain, tree, graph), to graphs compiled and optimized as artifacts. We then propose a constitutive definition of prompt graph engineering, state its four conditions (explicit structure, separation between structure and prompt content, executable semantics, and the graph as a first-class engineering artifact), and operationalize them as an inclusion and exclusion test. We draw the boundary against six neighboring concepts and apply the test to six real systems (LangGraph, DSPy, Prompt Flow, AutoGen, CrewAI, and Claude Code subagents); it includes and excludes consistently. We close with a research agenda organized along four design tension axes. The contribution is an operational definition and a shared vocabulary for a practice that industry already exercises daily without naming precisely.

Verifying building compliance requires validating thousands of rules against large Building Information Modeling (BIM) designs, which is laborious, capital-intensive, and unscalable. Existing Automated Compliance Checkers (ACCs) are often difficult to generalize across different scenarios, as they are typically developed for highly specific rule sets and use cases. In addition, many ACCs are proprietary, meaning the underlying verification code is not released to end users, so users cannot verify whether their regulatory intent can be accurately captured. We introduce ARCHER (Agentic Rule and Compliance Harness for Executable Regulations), a test-driven, deterministically orchestrated multi-agent program-synthesis harness that generates auditable verification code from regulatory Codes of Practice, enabling transparent, adaptable, and scalable compliance checking. To characterize what makes agentic synthesis work, we evaluate a taxonomy of six harnesses of increasing agentic sophistication across four backbone models, spanning realistic data-governance tiers (from frontier third-party APIs to a fully on-premise open-weights model) on a novel dataset derived from real-world compliance scenarios. ARCHER's deterministic multi-agent orchestration achieves the highest accuracy for every backbone, improving mean union accuracy by 82% over a naive single-pass prompting baseline. Our cost-accuracy analysis further shows that using the ARCHER harness, a self-hosted open-weights model can reach 97.8% of frontier-API accuracy at a quarter of the cost, making data-sovereign compliance checking practical.

Maintenance regulations are complex legal texts that are difficult to exploit when addressing a specific case and challenging to integrate into operational systems. This paper presents a two-stage LLM-assisted workflow for French maintenance regulations: ontology engineering from a SEMLEG-based core ontology, followed by construction of an ontology-grounded French legal knowledge graph. The first stage consists in the open extraction of typed entities and triples from a stratified corpus sample, the normalization of labels through embedding-based fusion, and the induction of candidate object properties with their signature (domain and range). The second stage uses the resulting ontology to guide the closed extraction of triples and RDF graph construction over the full corpus. Experiments with GPT-4.1 and mistral-large-2512 show robust structured outputs, near-complete class alignment, and a substantial reduction of duplicated entities and predicates after fusion. Fewer than 20% of triples introduce unseen properties, while lower exact signature compliance reveals new domain-range combinations for existing predicates. These results point to predicate normalization and the validation of newly observed relation signatures as key refinement steps for industrial maintenance settings.

Artificial intelligence (AI) systems are increasingly deployed in high-stakes domains such as healthcare, autonomous driving, finance, and education. While these systems offer powerful data-driven and adaptive capabilities, their complexity, rapid evolution, and dependence on dynamic data pipelines introduce new forms of engineering liability collectively referred to as AI Technical Debts (AITDs). AITDs arise from root causes spanning data governance, model implementation, algorithm design, architectural decisions, operational processes, documentation practices, and testing adequacy. Unlike conventional technical debt, many AITDs are latent and propagate across tightly coupled AI pipelines, leading to maintenance challenges, reliability degradation, and heightened safety or security risks. Guided by the principles of AI Trust, Risk, and Security Management (AI TRiSM), this study reinterprets technical debt through the interconnected dimensions of trustworthiness, focusing on AI safety and security technical debts. We conduct a systematic review of 60 primary studies and identify 31 distinct types of AITD, which are organized into a root-cause-oriented taxonomy comprising seven classes. The analysis examines how these debts map to 18 trust-related concerns, including 6 safety hazards and 12 security vulnerabilities. To support mitigation, the review synthesizes 34 actionable guidelines (8 safety and 26 security) targeting the prevention, detection, and reduction of AITDs across the AI lifecycle. Building on these findings, we introduce AITD-MAP, an integrated framework that connects the AITD taxonomy, quality and risk impacts, and mitigation strategies into a unified structure for risk-aware AI engineering. The framework aims to assist AI software engineers in making AI safety and security technical debts visible, understanding their root causes, and mitigating their presence.

This paper examines the question of whether artificial intelligence (AI) systems can be creative, approached from the dual perspective of a researcher trained in electrical engineering, pattern recognition, machine learning, and neural networks, who has also spent most of his life engaged in the arts as actor, stage and film director, writer, composer, and visual artist, and in philosophy. Drawing on Margaret Boden's foundational framework, both her three properties of creativity (novelty, surprise, and value) and her three types of creative processes (combinatorial, exploratory, and transformational), the paper argues that AI systems are structurally incapable of creativity in its strongest sense. While they exhibit genuine capability in the domain of combinatorial creativity, they are significantly bounded in exploratory creativity, and fundamentally incapable of transformational creativity. The paper further argues that the most important limitation of current AI systems is not the absence of novelty per se, but the absence of any mechanism for serendipity, accident, or the unexpected, all of which play a central role in the phenomenology of creativity, and the absence of any subject position from which to recognize and welcome such chance events. The paper concludes by proposing a model of human, AI creative collaboration that is both realistic and generative, illustrated by several concrete experiments. The paper is itself a demonstration of the thesis it advances: it was composed through a deliberate human AI collaborative process, which is described in the methodological note that opens it.

Nowadays, the creation of a process flow diagram (PFD) and its subsequent transformation into a piping and instrumentation diagram (P&ID) is predominantly performed manually. Applying artificial intelligence in the task could potentially lead not only to process automation and time savings, but also to financial gains by exploring numerous diagram's topology options and reducing manual labor. This research presents P&ID Pilot - a practical end-to-end AI pipeline capable of handling flowsheet developing for both stages. The first stage focuses on PFD synthesis, whereas the second is directed toward modifying the generated PFD into P&ID. After comparing four different methods, the hybrid approach combining genetic algorithms (GA) and large language models (LLM) is shown to generate the optimal valid PFD topology, achieving the lowest loss value among all the methods, while satisfying the required outlet flow parameters without engineering-rule violations. For the second stage, the proposed LLM-based agent successfully transforms the generated PFD into a source-grounded P&ID by producing validated, executable modifications through a restricted engineering software development kit, achieving 100% execution success while maintaining compliance with domain-specific rules and reference graph structures. This unified pipeline - coupling GA/LLM-driven synthesis with an LLM-based transformation agent - offers a feasible path toward end-to-end process design automation by producing validated, deployable outputs and substantially reduces manual engineering effort.

Information Extraction (IE) from Architecture, Engineering, and Construction (AEC) drawings remains hindered by manual inefficiency, while Layout Detection, a vital 'middleware' organizing graphical and textual hierarchies, is underexplored. General document layout models, optimized for text-centric content, lack validation on engineering drawings. This study constructs a custom AEC-specific layouts dataset and benchmarks five deep learning architectures. RF-DETR achieves state-of-the-art performance with an $mAP_{50}$ of 0.949, while the Vision-Language Model Qwen3-VL attains a leading F1-score of 0.911. Conversely, models pre-trained on general document datasets suffer from "domain interference", causing performance degradation. This establishes a robust technical foundation for automated IE in AEC.

Agentic artificial intelligence systems, capable of autonomous perception, planning, tool use, and multi-step action, are increasingly proposed for critical engineering domains where decisions carry physical, operational, or economic consequences. This survey addresses a gap in current literature by treating trustworthiness, whether agentic behavior can be verified, audited, and trusted under the constraints that engineering practice actually requires, as a first-class engineering property, rather than evaluating agentic AI by task capability alone. The study adopts a trustworthiness model organized around five cross-cutting dimensions: safety and constraint satisfaction; robustness and reliability; transparency and interpretability; accountability and auditability; and privacy and security. This is mapped onto an agentic assurance workflow spanning perception through audit. Building on this foundation, agentic systems architectures, threats, concrete trust mechanisms, and quantitative metrics are surveyed for direct application in agentic systems development and evaluation. These principles are then examined across four constraint-bound engineering domains: power systems, autonomous vehicles/robotics/UAVs, high-performance computing, and communication networks, identifying recurring design patterns, shared failure modes, and domain-specific gaps. Synthesizing across those domains, agentic AI trustworthiness is shown to be a single problem, with a path outlined toward a reusable, cross-domain assurance framework analogous to the graded certification regimes used by mature safety-critical engineering fields.

Ontology extension refers to the process of enriching an existing ontology in response to emerging requirements, making it more complete. This task is a resource-intensive and error-prone process. Large Language Models (LLMs) have shown promising performance on generating ontologies from scratch, but current approaches rarely tie ontology extension explicitly to requirements or reusable core models, and offer limited, systematic evaluation of LLM outputs. This paper introduces OntoExtend, a requirements-driven framework for ontology extension with LLMs. It uses retrieval-augmented generation (RAG) over relevant input ontologies and requirements in the form of competency questions to propose grounded extensions. We evaluate OntoExtend on 39 CQs from two use cases: a public EU-project ontology, Onto-DESIDE, and an industrial ontology from Bosch. The generated fragments show few structural issues, satisfy all functional evaluation tests, and are rated by ontology engineers as requiring minor to moderate revision before integration. These results suggest that OntoExtend is useful as a drafting assistant for requirement-driven ontology extension in real world scenarios, while remaining sensitive to CQ specificity and modelling profile.

Agentic AI systems do not just predict or recommend; they plan, maintain state, and act in external environments with varying degrees of autonomy. This changes the requirements engineering problem in a specific and under-addressed way: it introduces what we call the delegated-autonomy boundary -- the set of decisions about what may be delegated to the system, under what graduated authority, with what oversight, and how control is returned. Current practices bury these decisions inside prompts, tool schemas, and runtime policies, even though they are requirements-level commitments. This paper proposes two complementary artifacts. First, an Agency Justification Record (AJR) helps teams decide when an agent is warranted over simpler alternatives. Second, an Agentic Delegation Policy (ADP) captures what must be specified for safe and effective development: purpose, authority, information, coordination, assurance, and evolution. Crucially, authority in the ADP is modelled as graduated, i.e., a tiered structure. We illustrate the framework with two contrasting examples: a safety-critical hospital discharge coordination agent and an automated code review agent.

Many engineering problems involve phenomena whose governing equations are poorly characterized or only partially known. Surrogate modeling techniques such as neural networks can capture the behavior of these systems, but they typically demand large training datasets that are difficult to obtain in engineering contexts and yield models with limited physical interpretability. The Sparse Identification of Nonlinear Dynamics (SINDy) method addresses both limitations by performing sparse regression over libraries of candidate nonlinear terms, recovering interpretable governing equations from comparatively small datasets. Although SINDy has been demonstrated extensively on canonical benchmark systems, its application to practical engineering problems is less widely documented. This tutorial introduces the SINDy method and progressively builds toward its main extensions, from noise-robust weak-form and ensembling-based variants to constrained and parametrizable formulations. The paper and the accompanying tutorial (available at https://github.com/paullililili/SINDy4Engineers) is organized in three parts: the first introduces the standard SINDy algorithm and progressively extends it, inviting readers without prior knowledge to follow each step and adapt the methods to their own problems; the remaining two parts present detailed case studies on (1) the system identification of an unmanned aerial vehicle and (2) a chaotic thermosyphon heat exchanger. Through these examples, we aim to demonstrate that SINDy is simple to implement yet flexible enough to serve as a valuable identification tool for advanced engineering applications.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

Interoperability between heterogeneous modeling tools remains a significant challenge in Model-Driven Engineering (MDE), particularly in the automotive domain where multiple modeling languages, as well as defacto standard proprietary and open-source tools coexist. This paper presents an LLM-driven approach for automated model interoperability by considering two relevant aspects: 1) mapping model instances to a target metamodel 2) merging of metamodels. The proposed methodology is demonstrated through transformations involving Ecore and SysML v2 based metamodels and incorporates structural validation of generated model instances against user-defined target models. Automotive case studies illustrate the feasibility of the approach and show that large language models can significantly reduce manual transformation effort while generating structurally valid target models for cross-tool interoperability.

The rapid emergence of LLM-powered autonomous and semi-autonomous agents is reshaping software systems from static, request-response components into goal-directed, adaptive, and tool-using computational actors. As these agents move from isolated cognitive prototypes into complex distributed workflows, they confront challenges that the Service-Oriented Computing community has studied for more than two decades: composition, interoperability, quality of service, lifecycle management, governance, security, and trust. Yet much of today's agentic AI ecosystem is developing these foundations ad hoc, without the engineering rigour required for dependable enterprise and societal deployment. This paper introduces Agentic Service-Oriented Computing (ASOC) as a new research and practice area concerned with engineering agents as services, orchestrating services through autonomous and semi-autonomous agents, and governing ecosystems of agents and services under constraints of trust, cybersecurity, compliance, performance, and accountability. We articulate six foundational principles of ASOC (harness-ability, composability, lifecycle engineering, trustworthiness by design, goal-driven orchestration, and observability/accountability) and organise a five-dimensional research agenda spanning: (i) agentic services foundations and lifecycle engineering; (ii) composition, orchestration, and interoperability; (iii) governance, observability, and accountability; (iv) security, trust, and risk management; and (v) evaluation, certification, and Agentic QoS. We argue that the Services Computing community is especially well positioned to provide the conceptual and engineering spine for this emerging field, transforming agentic AI from fragmented demonstrations into dependable, service-based systems worthy of human and organisational trust.

Structural optimization problems often involve a large number of decision variables and highly non-convex feasible regions, making convergence to the true Pareto front extremely challenging. Even when convergence is achievable, it typically requires thousands of function evaluations, resulting in significant computational cost. This highlights the need for efficient and robust optimization algorithms for real-world engineering applications. In this study, we introduce a novel constrained multi-objective evolutionary algorithm, termed DPCME. The algorithm employs two interacting populations that exchange information, enabling effective global exploration and reducing the risk of convergence to local optima. To further enhance performance, a recent repair-based constraint-handling technique is incorporated, and alternative repair approaches are proposed and systematically evaluated. The proposed algorithm is tested on three engineering problems: the 72-bar truss, the 120-bar truss, and a chemical tanker structure, each involving hundreds of nonlinear failure constraints. Its performance is evaluated against state-of-the-art constrained multi-objective optimization algorithms from the latest PlatEMO package. A total of 43 algorithms are initially tested, from which the 12 best-performing methods are selected for detailed comparison. The results demonstrate that DPCME achieves superior or competitive convergence and diversity across all test cases, and that the inclusion of repair-based constraint handling further improves its performance.

VectorizationLLM is a specialized Large Language Model based on Google open-weight LLMs. The model is designed to assist students to learn smart vectorization, time/wave vector analysis, piecewise functions, Fourier analysis, and differential equations in MATLAB. The course application is CTEC 247: Applied Computational Analysis II by the Department of Electrical & Computer Engineering Technology at New York Institute of Technology Old Westbury. The LLM model is designed to be an instructive assistant, providing detailed explanations of concepts with examples from in-class notes without providing direct answers to questions. The model is designed with a RAG (Retrieval Augmented Generation) knowledge base and system prompt architecture. Examples in both code, text, and images are provided in the LLM responses.

This paper presents a black-box evaluation framework to systematically assess the ability of Large Language Models (LLMs) to generate Design Structure Matrices (DSMs) from structured technical documentation. Motivated by the closed-source nature of current Auto-DSM pipelines, the framework introduces a reproducible methodology that benchmarks generated DSMs (GEN-DSMs) against manually validated ground-truth matrices (GT-DSMs). The evaluation integrates both single-run and multi-run perspectives, combining structural metrics (Completeness, Correctness, Coupling Density), classification metrics (Selective Accuracy, Abstention Coverage), and stability measures (Entropy, Fleiss' $κ$). To synthesize these aspects, a Composite Quality Score (Q) is proposed. Controlled experiments are conducted on two datasets: a fictive abstract system and a real-world refrigerator decomposition, covering variations in phrasing, parameter-dataset alignment, and system complexity. Results show that LLMs can produce structurally plausible DSMs and achieve high reproducibility under well-structured inputs, but remain sensitive to ambiguity, inconsistent dependency definitions, and prompt formulation. The findings highlight systematic sources of hallucination and abstention failure, demonstrating both the potential and current limitations of LLM-driven DSM automation. The proposed framework provides a transparent benchmark for auditing Auto-DSM pipelines and establishes foundations for integrating LLM-based decomposition methods into model-based systems engineering (MBSE) workflows.

Large language models (LLMs) are increasingly applied to resume optimization for applicant tracking systems, introducing hallucination failures distinct from general text generation: anachronistic technology injection, cross-domain terminology contamination, structural mutation, and content fabrication. We present Grounded Optimization, a five-layer framework combining temporal context validation, deterministic contamination detection, structural invariant enforcement, prompt-level grounding, and an evaluator agent. In ablation experiments across three LLMs, four temperature settings, and six layer configurations on 25 synthetic resumes spanning 14 industries, undefended baselines produce 2.48-5.36 detected hallucinations per resume. Among detectors independent of the active defenses, temporal hallucinations are reduced by 50-95% across all conditions; overall detected hallucination rate falls to 0.04-0.24. Prompt-level grounding alone achieves zero detected hallucinations at low temperature with a capable instruction-following model; higher temperatures and weaker models reveal the need for the deterministic layers as a complement. We release the contamination taxonomy, evaluation code, and raw data.

Multimodal CT-MRI registration is central to image-guided radiotherapy, surgical navigation, and diagnostic workflows, but most pipelines report only aggregate quality metrics without per-case reliability signals. We propose a reliability-aware framework that converts registration quality into Green/Yellow/Red risk categories using data-learned thresholds. CT images were registered to T1-weighted MRI using rigid and affine transformations on 90 paired slices from 18 patients across brain, abdominal, and neck anatomies. Reliability was assessed using Delta NMI, Delta SSIM, Dice overlap, registration stability, and inverse consistency error, combined into a single score R. Thresholds learned from training patients were applied unchanged to held-out test patients. Affine registration outperformed rigid registration on NMI and SSIM, yielding 44% Green classifications versus 33% for rigid. Reliability-filtered registrations improved the average alignment profile compared with unfiltered methods. Per-anatomy analysis showed substantial variation, with stronger reliability for abdominal registrations than brain registrations. Weight sensitivity analysis identified Dice overlap as the dominant reliability component. The proposed framework provides an interpretable quality-control layer for multimodal registration, while risk thresholds reflect statistical rather than clinical validation.

Engineering specifications such as interlocks, alarm rationalization tables, and cause-and-effect (C&E) matrices remain central to process control and safety, yet their creation is still predominantly manual, document-driven, and prone to inconsistency. This paper presents a semantic-AI framework that automates the generation of C&E logic by combining a knowledge graph (KG) with a constrained large language model (LLM) layer. The KG builds on an established modular alignment ontology to represent process structure, operating modes, faults, symptoms, causes, and mitigation actions in a machine-interpretable form. The LLM then transforms this information into operator-ready safety narratives and Semantic Web Rule Language (SWRL) rules under strict ontology and vocabulary constraints, grounding the generated artifacts in the underlying semantic model. The workflow is demonstrated on a modular process plant, showing how engineering semantics, diagnostic relations, and machine-verifiable specifications can be generated from a unified knowledge representation with reduced manual effort.

Scalar objective functions are required when a multi-criteria optimization problem must yield a single preferred design rather than only a Pareto set. The choice of scalarization influences which compromise is selected, how preference parameters are interpreted, and whether non-supported Pareto regions can be reached. This paper compares four formulations for normalized bi-criteria minimization: weighted sums, achievement scalarizing functions, desirability functions, and a fuzzy-logic-based formulation. Two analytically defined Pareto fronts, one convex and one concave, isolate the effect of the objective formulation from numerical optimizer behavior. The comparison focuses on reachable Pareto regions, parameter-induced selection density, compensation between criteria, sensitivity, and interpretability. Results show that weighted sums are simple but structurally limited on concave fronts, while achievement, desirability, and fuzzy formulations reach interior non-supported regions through different mechanisms. Desirability functions introduce nonlinear single-criterion preference mappings, whereas fuzzy rules express nonseparable and reference-dependent engineering preferences.

The transition from static chat bots to autonomous agents--equipped with persistent memory, tool-use protocols, and multi-agent collaboration--has fundamentally expanded the AI threat landscape. Current defense mechanisms, such as perimeter security and training-time alignment, remain external to the agent's active reasoning loop. Consequently, they fall short: a fully aligned agent remains highly vulnerable to runtime hijacking via memory poisoning, tool-chain manipulation, or multi-agent protocol attacks. To address this critical gap, we introduce the Agent-Native Immune System (ANIS), the first biologically inspired, endogenous defense architecture embedded directly within the agent's cognitive loop. Our framework presents four primary contributions. First, we design a six-layer Immune Tower (L0-L5), distinctly incorporating Barrier Immunity (L1) as a non-cognitive, physical-and-logical isolation layer. Second, we establish a unified taxonomy of Agent Viruses and Agent Vaccines, formalizing the critical distinction between superficial non-parametric defenses and robust parametric vaccines. Third, we conceptualize the Harness Triad--Meta, Self, and Auto--a self-monitoring, meta-cognitive automation backbone that drives Continual Immune Learning (CIL), enabling vaccines to dynamically adapt to novel threats. Finally, we establish a rigorous theoretical demarcation between model alignment and agent immunity: while alignment provides a static "constitutional" value foundation during training, ANIS serves as the dynamic "law enforcement" mechanism during runtime. We conclude by framing open challenges for the field, including immune protocol standardization, novel evaluation metrics such as the Autoimmunity Rate (false-positive intervention rate), and the co-evolutionary dynamics between pathogens and vaccines within collective intelligence ecosystems.

In ill-posed inverse problems, the recovered solution depends as much on the prior as on the data, yet much of the engineering knowledge that could serve as that prior is recorded qualitatively rather than in formal mathematical form. Here we test whether sentence embeddings can act as an inference-time interface for injecting geological descriptions into a learned Darcy-flow inverse solver. Across six synthetic geological classes and an exploratory transfer to a benchmark reservoir model (SPE10), we vary only the conditioning representation and find that text conditioning reduces reconstruction error by 81 % relative to a no-text counterfactual. Most of this gain comes from a categorical, class-level constraint whose value concentrates where the hydraulic head leaves the conductivity field underdetermined, while within-class geometric detail is secondary and pattern-dependent. Compared with a discrete class label, sentence embeddings add little dense-observation accuracy but improve training stability and enable paraphrase-based sensitivity analysis and open-vocabulary inputs. These results show that language priors can serve as an engineering-informatics interface for injecting geological knowledge into learned inverse solvers, while clarifying when they help and what signal they actually carry.

Engineering reliable autonomous systems is an important and growing topic in computer science. As autonomous systems become more prevalent, easy-to-use techniques for building them reliably are increasingly important. This workshop report captures and expands on the discussions at the Lorentz Center Workshop "Engineering Reliable Autonomous Systems" (ERAS), held from 10 to 14 June 2024. The workshop was co-organised by the organisers of the Workshop on Formal Methods for Autonomous Systems (FMAS) and the Workshop on Agents and Robots for reliable Engineered Autonomy (AREA). It brought together members of the FMAS and AREA communities, industry practitioners, and representatives from sectors where autonomous systems pose distinctive engineering challenges. The workshop focused on three main research topics: techniques for verification and validation of autonomous systems; engineering real-world autonomous systems; and software architectures for safe autonomous systems. Its main outcome is a catalogue of challenges in these areas and, most importantly, a pathway to solutions. Some challenges can already be tackled by techniques that are well known in academia but have not yet become regularly used in practice. Other challenges remain unresolved and require further research. This roadmap is intended to support future research and industrial collaboration.

Large language models can produce confident but protocol-invalid answers in domains where procedural compliance is critical. This paper presents Answer Engineering, a deterministic runtime and authoring layer that applies localized rule-guided interventions to the visible reasoning trajectory during standard autoregressive generation, without retraining, modifying model weights, or performing global search. The method is evaluated on a controlled clinical benchmark for sudden sensorineural hearing loss (SSNHL), where correct management depends on protocol-consistent interpretation of symptom timing, Weber/Rinne tuning-fork findings, and otoscopic findings. In the benchmark, step-by-step reasoning shifted rather than eliminated errors: compliant outcomes for SSNHL decreased from 54.5% under unguided generation to 25.1%, while acceptance on the conductive contrast condition increased from 1.6% to 58.9%. Local trajectory editing increased SSNHL compliance to 83.5% and conductive-case adherence to 77.9%, raising balanced accuracy from 42.0% under reasoning-only generation to 80.7%. The results support a systems-level view in which protocol adherence can be improved through auditable runtime control of reasoning trajectories, while also identifying limitations caused by rule coverage, trigger reliability, and persistent diagnosis-first generation dynamics.

Electronic design automation (EDA) is inherently multi-stage and handoff-heavy. Design artifacts, flow scripts, and engineering decisions cross tool, session, and organizational boundaries before final implementation, signoff, or release. Each transfer carries explicit and implicit requirements that may not be fully captured by stage-local checks. LLM-based agents now invoke EDA tools directly, embed retrieved knowledge in executable scripts, and hand off state across sessions and stages. Once their outputs condition downstream engineering decisions, the transferred object must satisfy a handoff contract and meet the assumptions of its next consumer. This survey introduces handoff validity as its organizing principle. A handoff is valid when the transferred object satisfies the consumer's acceptance conditions and carries sufficient context, evidence, and provenance for downstream use. We review 82 systems and classify them into three boundary classes. Stage-Bound systems establish validity within a single EDA stage or bounded verification task. Flow-Bound systems preserve coherent workflow state across tools, invocations, and sessions. Organization-Bound systems maintain source grounding, provenance, scope, and admissibility across knowledge and authority boundaries. For each class, we analyze handoff contracts, handoff objects, coordination mechanisms, and open questions. These analyses motivate a five-layer EDA agent communication protocol (EACP), covering the agent discovery, agent message, tool invocation, workflow orchestration, and security and IP protocols. We aim to provide a common vocabulary and research agenda for trustworthy agentic EDA.

The March 2020 INCOSE INSIGHT special issue on AI and Systems Engineering (SE) became the most downloaded issue in the publication's history and launched a research community that now draws over 250 registrants to its annual workshop. In this article, we trace the progress in AI and SE across three phases (labeled here foundational, applied, and LLM inflection) based on the authors' reading of the field's core papers, and describe our opinions of where the community has converged and where critical gaps remain. Separately, a human-AI agreement literature review leveraging both human expertise and six AI models was performed to assess the relevance of 1,712 INCOSE INSIGHT articles and 889 SERC publications. The results identify five critical research gaps and offer guidance for practitioners navigating AI adoption, assurance, and workforce transformation in SE. We share the agreement data and the AI4SE/SE4AI Explorer web application so readers can compare their own relevance judgments with the human and AI raters.

AI pipelines that reason quantitatively over technical text depend on input where physical quantities, numbers, units, and symbolic expressions arrive intact; when these entities fragment at tokenization, errors propagate downstream. Byte-Pair Encoding, optimized for vocabulary compression, is blind to such entities and fragments them into arbitrary subwords -- a problem aggravated in technical Brazilian Portuguese. We present TOTEN, a knowledge-based system whose input representation preserves each technical entity as a whole, typed unit: vocabulary is not derived statistically but classified declaratively under a formal ontology of engineering entities (OEE). The core is the triple <O, classify, {inst_tau}>: types, principles, and invariants; a classifier mapping raw text into typed regions; and instantiators yielding a self-descriptive representation. Integrity rests on deterministic coupling to three external authorities: Pint (dimensional), Unicode Character Database (typographic), and RSLP (Portuguese morphology). We evaluate four properties verifiable by construction -- atomicity, dimensional equivalence, typographic robustness, numerical reconstruction -- on an internal benchmark (EngQuant, N=800) and four Brazilian Portuguese external corpora (N=1771 eligible cases), and report detection recall. Against eight state-of-the-art baselines, TOTEN reaches unit atomicity in all contrasts and reconstruction of 0.775-0.904 externally vs. 0.627-0.703 for the best (Quantulum3); on EngQuant, 0.780 vs. 0.340. Differences are significant (McNemar, Holm-corrected). Spearman correlation between internal and external rankings confirms concurrent validity of the control benchmark. TOTEN shows statistical parity with Pint in dimensional equivalence. The result is a structurally faithful, auditable, low-cost input layer for intelligent systems on technical knowledge, without generative models.

The prevailing engineering intuition for addressing conceptual drift in long-horizon LLM collaboration is to trade more formal constraints for more reliable outputs -- designing symbolic identifier systems, accumulating defensive rules in System Prompts, expanding context windows. Our engineering record shows that in long-horizon settings, this direction may produce effects contrary to design intent. Using action research methods in a real software project (Bang-v3) spanning approximately one month and 391 collaborative sessions, we document and analyze the failure process of these strategies. When the symbolic system exceeds a complexity threshold, LLMs do not become more accurate -- instead, they abandon genuine understanding of business semantics, retreat to self-referential reasoning within the symbolic layer, and generate outputs that appear internally consistent but are physically disconnected from reality. We name this failure pattern "Index Sickness," and its canonical manifestation "Phantom Legislation." We name the underlying principle the "Pang Principle (Semantic Vitality Law)": natural language carrying explicit purpose conveys far greater information quality than symbolic expression. From this, we design and validate its physical engineering mechanism: "Baseline-Log Physical Separation." In the same project, this mechanism reduced AI Instructions volume by ~75%, and across the subsequent ~150 sessions, no recurrence of Index Sickness was observed. A bilingual companion version (Chinese) is included as supplementary material.

In many engineering applications, a single high-fidelity model produces multiple quantities of interest (QoIs) under the same input parameters, e.g. finite element models of complex physical systems. To alleviate the high computational cost of direct model evaluations, surrogate models are widely used to construct efficient approximations of model responses. Naturally, the accuracy of surrogates strongly depends on the quality of the experimental design (ED). However, a single ED may not provide an adequate representation for all outputs simultaneously, especially when different outputs exhibit varying sensitivities to the input variables. A straightforward solution is to perform separate sampling for each output, but this results in increased sampling complexity and computational cost. From a statistical perspective, such an approach also ignores potential correlations among all outputs and may compromise data consistency. To address this issue, an adaptive sequential sampling method for constructing polynomial chaos expansion surrogate models is generalized for vector valued QoIs. The method sequentially selects new samples from a candidate pool based on their local contribution to the output variance, while balancing distance-based exploration of the input space and exploitation of aggregated variance information across all outputs. Its performance is compared with non-sequential Latin Hypercube Sampling through several numerical examples from engineering problems. Numerical results demonstrate that the proposed strategy improves both surrogate accuracy and stability, and provides a more reliable estimation of second-order statistics.

Teaching Software Engineering for AI-enabled systems entails addressing the integration of AI components within full-scale software architectures under realistic constraints. While machine learning courses emphasize model development, students often lack experience in architectural design, deployment, and monitoring of AI-enabled systems. Empirical evaluations of such system-oriented AI courses remain limited. This paper reflects on the design and implementation of a project-based master's-level course titled AI Algorithms: Theory and Engineering, at the University of Bremen, in which students developed a movie recommendation system while making architectural design decisions to address challenges related to scalability, deployment, and evolving requirements. We conducted a mixed-methods study combining analyses of student submissions and questionnaire responses to investigate integration challenges, learning outcomes, and opportunities for improvement. Our results indicate persistent difficulties in early architectural decisions, heterogeneous ML integration, evolving requirements, and data management, largely due to uneven ML and software engineering expertise. From the educator's perspective, the course fostered system-level reasoning and strengthened awareness of data-centric ML practices in AI-enabled systems.

Engineers often measure many quantities-speed, pressure, temperature, length-expressed in different physical units. The Buckingham Pi-grec theorem states that these variables can always be combined into a smaller set of dimensionless numbers whose values fully determine the system's behaviour. Identifying the appropriate dimensionless groups has traditionally required expert knowledge and physical insight. This paper shows that they can instead be discovered automatically from data, without prior knowledge of the governing physics. The key observation is that, after logarithmic transformation, measurements collected under different scalings of the same system lie on a low-dimensional manifold whose geometry is determined by the underlying dimensionless groups. Singular value decomposition (SVD) identifies this manifold directly from data. A subsequent search over integer-exponent combinations recovers candidate dimensionless quantities, while a repeating-variable filter retains only those constructed from the machine's characteristic scales. This procedure recovers familiar engineering groups, including the flow coefficient, head coefficient, and Mach number, while excluding equivalent but less interpretable alternatives. The method is demonstrated on a synthetic compressor dataset containing 16,000 measurements. Starting from raw dimensional variables and no physics input, it recovers the correct dimensionless groups to numerical precision and reproduces the compressor performance map with an error below 0.01%. More broadly, the work reveals a close connection between classical dimensional analysis and modern data-driven learning. Both rely on the same underlying algebraic structure, suggesting new approaches for building physical models that are simultaneously interpretable, scalable, and data-efficient.

Based on a questionnaire of 100 higher-education students, predominantly from engineering-related fields, and a critical review of recent literature, this chapter examines how students use and perceive Large Language Models (LLMs) in engineering education. Students primarily value LLMs for writing support, conceptual clarification, coding assistance, and brainstorming, while simultaneously expressing concerns about inaccuracies, bias, overreliance, academic integrity, and the burden of verification. Through an analysis of two dominant metaphors, namely LLMs as an "oracle" and as a "tutor," the chapter shows how these systems cultivate expectations of authority, expertise, and personalized learning that often exceed their actual capabilities. The chapter further argues that students' attachment to the promises of efficiency and personalized support reflects a form of "cruel optimism," where the perceived benefits of LLMs often depend on the very skills, vigilance, and expertise that students are still developing. Overall, the chapter argues for a purpose-driven and context-sensitive approach to AI integration in engineering education, emphasizing critical AI literacy, reflective assessment design, pedagogical caution, and consideration of broader ethical and environmental impacts.

Current Generative AI (GenAI) interfaces remain largely constrained to chatbox interaction, which can impose high cognitive demands on users and create substantial barriers for people with intellectual disabilities (ID), including prompt formulation difficulties, response overload, and limited mechanisms to assess information reliability. To explore alternative interaction models for cognitive accessibility, we conducted a cross-disciplinary co-design challenge in which two student cohorts (Computer Science and Industrial Design) developed interface concepts from the same set of functional requirements (e.g., prompt scaffolding, structured output, GUI-based refinement, transparency, and personalization). Comparing the resulting proposals reveals both convergence on foundational requirements (notably initial calibration, proactive prompting, and direct manipulation of response fragments) and complementary contributions that outline a multi-layered support system. Computer Science teams primarily produced structural scaffolding, emphasizing predictability, navigability, and trust through mechanisms such as reliability indicators, explicit sources, and context management for long conversations. Industrial Design teams emphasized experiential scaffolding, focusing on pacing, attention guidance, multimodality, and proactive agency, including step-by-step response flows, focus modes, and assistant-like integrations. We synthesize these findings into a dual-layer scaffolding framework that expands the design space for cognitively accessible GenAI interaction beyond chat-centric models and motivates future work on expert refinement, technical feasibility, and empirical validation with users with ID.

The ability to resolve complex physical phenomena with high fidelity and at low computational cost is central to addressing key challenges in modern engineering. A prime example lies in hypersonic flows, where the precise prediction of the full flowfield topology, in particular with respect to shock wave location and intensity, is critical. Yet supersonic and hypersonic flows continue to be a stumbling block for traditional reduced-order models and neural emulators that struggle to capture steep gradients in flow states with physical consistency in applications of industrial relevance. To that end, we introduce a fully GPU based workflow that integrates accelerated data generation with the training of neural emulators augmented by uncertainty quantification and physics-aware refinement. Our workflow is enabled by a differentiable high-fidelity solver (JAX-Fluids) which we employ for rapid dataset creation and residual-based improvement of the neural emulator to enhance physical consistency. Building on this framework, we first present a suite of model architectures and analyze their scaling behavior to expose their strengths and shortcomings. We then show that residual-based refinement enables training on cases where only mesh and input parameters are available, substantially reducing residuals and improving physical consistency. Together, differentiable simulation and residual-based refinement yield physics emulators that remain reliable beyond their training distribution, a key requirement for deploying surrogates in real-world engineering design loops.

Data-driven engineering design is constrained by the lack of large-scale 3D datasets that pair geometry with physics-based performance labels. In particular, existing 3D data augmentation techniques have limitations in preserving subtle and diverse geometric variations, and it remains difficult to automate the subsequent simulation-labeling process, where boundary conditions vary depending on the generated geometry. We present DeepJEB++, a foundation-model-driven data-augmentation framework that expands a small seed set of jet engine brackets into a large, simulation-labeled 3D dataset under constrained resources. Our key idea is to augment in the data-rich 2D latent space, then transfer to 3D. In Stage 1, we fine-tune a pretrained 2D latent diffusion model on multi-view renders and synthesize novel views by latent interpolation, retaining manufacturable designs through a vision-language-model (VLM) quality filter. In Stage 2, the validated images are lifted to 3D meshes by a domain-adapted generative foundation model. In Stage 3, an automated pipeline recognizes the load and bolt interfaces on each mesh and assigns finite-element labels -- mass, stress, and displacement -- without manual intervention. We assess augmentation quality along three intrinsic axes: manufacturability, label fidelity against the SimJEB ground truth, and distributional consistency. Starting from fewer than 400 seed designs, DeepJEB++ yields 15,360 simulation-labeled 3D brackets -- a 40x expansion -- using a single GPU per stage. The dataset will be made publicly available to support reproducible engineering-AI research.

Finite element (FE) modeling of safety-critical infrastructure such as bridge barriers requires high-fidelity nonlinear dynamic analysis, yet the current FE modeling process remains labor-intensive and lacks automation. This paper presents the Human-Enhanced Loop Modeling (HELM) framework, a collaborative human-agent protocol that decomposes long-sequence finite element modeling into discrete, visually verifiable checkpoints across geometry generation, boundary condition definition, and material assignment. The framework is demonstrated through a 20-case matrix of reinforced concrete bridge barriers under MASH TL-4 and TL-5 lateral loading conditions, interfacing specialized agents with two widely used commercial FE softwares, i.e., ANSYS and LS-PrePost. Experimental results show that HELM improves the baseline autonomous modeling success rate from 20% to 75%, with agent-level pass rates for geometry and boundary condition tasks approximately doubling. Error analysis reveals that spatial reasoning and algebraic logic limitations constitute the primary failure modes, underscoring the value of structured human-in-the-loop intervention for modeling automation. The complete agent design code and prompts are open-sourced and can be accessed at: https://github.com/SimAgentDev/Ansys-LSPP-AgentKit.