Robotic Arms

This paper examines three approaches for modeling the dynamics of a flexible-link 2-DoF robotic arm to address unmodeled dynamics not captured by rigid-body models. Two physics informed models combine rigid-body dynamics (RBD) formulations with a Gaussian Mixture Model (GMM) to capture residual model errors and linkage flexibility. A kinematics-based regression model serves as a purely data-driven baseline. Using an open-source dataset, torque predictions are first estimated using Ridge regression on kinematic features, while the physicsbased baseline is constructed from published specifications, and ordinary least-squares regression is subsequently used to estimate the same parameter set directly from data. Results show that the physics-based parameters yield the poorest accuracy, while regularized and least-squares estimators align more closely with measured torques. Residual analysis and error metrics highlight the limitations of purely parametric models for flexible-link systems and underscore the value of regularization and data-driven identification, supporting developments of semi-parametric residual learning methods.

We propose FlipItRight, a framework for stable planar pose-targeted throw-flip with a high-DoF manipulator. The task is decomposed into an object-level planner, which generates candidate release states satisfying the desired landing pose, and a robot-level planner, which evaluates executability and constructs a feasible swing motion. Treating the release state as an explicit intermediate representation enables principled candidate filtering, adaptive selection of release and pre-swing configurations, and structured near-release motion design -- in particular, approximately constant end-effector velocities during the final swing phase to improve robustness to release-timing uncertainty. We validate on a real platform across objects of varying shape, size, and mass, achieving a 90% success rate across 120 trials. Ablation studies confirm that each design choice contributes to throwing performance, and the framework requires no prior data or learned model, enabling direct deployment on new objects and targets without environment-specific calibration or data collection.

While Model Predictive Control (MPC) provides strong stability and robustness, it imposes a significant computational burden on real-time systems. This paper investigates the application of Behavior Cloning to approximate MPC policies for the real-time control of a 3-degree-of-freedom robotic manipulator. We present a baseline controller combining Inverse Kinematics with MPC and evaluate neural network architectures, ranging from classical regression algorithms to deep learning models including Deep MLPs and RNNs, to derive computationally efficient surrogate policies. We analyze generalization capabilities, stability considerations, and the trade-offs inherent in different architectural choices. Our empirical study employs both online and offline evaluations to assess performance regarding accuracy, computational efficiency, and fidelity to the original MPC policy. Our results demonstrate that Behavior Cloning can effectively reduce the computational burden of MPC policies for 3-DOF robotic manipulators, achieving a 3x reduction in inference latency with a 84.98% success rate under relaxed tolerances. Notably, we find that static architectures outperform temporal variants, confirming the sufficiency of instantaneous state observations for this task. However, we observe a precision gap under strict tolerances, which suggest that while Behavior Cloning captures the global optimal trajectory, further research is needed to minimize terminal steady-state error.

Robot teleoperation enables safe, non-contact task execution in hazardous environments where direct human access is difficult, and its application has expanded with recent VR technologies. Many VR teleoperation studies, however, have primarily served as data-collection tools for robot imitation learning, so they often do not explicitly address dynamic obstacles, workspace changes, or collision risks during operation. For real deployment aimed at operator safety, teleoperation must react to dynamic situations with low latency and remain robust to mistakes made by inexperienced operators. This paper presents a VR teleoperation framework that supports real-time manipulation while handling collisions with both static and moving obstacles. The framework integrates GPU-accelerated inverse kinematics and trajectory optimization within a VR interface to generate feasible joint commands at each control cycle under robot constraints. Experiments with a 7-DoF manipulator demonstrate stable online behavior and collision-aware motion generation across three scenarios: obstacle-free, static-obstacle, and moving-obstacle environments. The results indicate that the proposed approach generates motion consistent with the operator's command while producing safe detours when obstacles interfere with the commanded path.

Safe physical interaction is critical for deploying robotic manipulators in human-robot interaction and contact-rich tasks, where uncertainty, external forces, and actuator limitations can compromise both performance and safety. We propose an online adaptive impedance control framework that enforces joint-state safety while achieving compliant interaction under uncertain dynamics. The approach combines a quadratic-program-based safety filter with a novel composed position-velocity non-smooth control barrier function (NCBF), enabling joint position and velocity constraints to be enforced through a unified relative-degree-one barrier. Unknown dynamics are compensated online using an interval type-2 fuzzy logic system, while actuator torque limits are handled through soft constraints with exact penalty recovery of feasible solutions. A disturbance-observer-enhanced safety mechanism improves robustness against modelling errors and external interaction forces. Using composite Lyapunov analysis, we prove forward invariance of the safe set and the uniform ultimately boundedness of the impedance-tracking error. Simulations on a 7-DOF manipulator with severe parametric uncertainty and external interaction wrenches demonstrate safe constraint satisfaction and robust impedance tracking.

This paper addresses the problem of identifying parsimonious explicit piece-wise polynomial relationships that might involve a relatively large number of raw features. The algorithm leverages a recently proposed identification algorithm that yields parsimonious implicit relationships enabling to derive normality characterization in the context of anomaly detection and localization. The algorithm proposed in this paper goes a step further by deriving explicit piece-wise representations that are built using the set of polynomials involved in the implicit representations. The framework is illustrated on the problem of identifying parsimonious explicit representations of the inverse model of a 6-axis manipulator robot. Moreover, further experiments on a 4-axis robot are also shown which are designed to investigate the generalization capability of parsimonious models compared to state-of-the-art DNNs structures, when models face unseen contexts of use.

We propose an optimization-based framework for robust contact-rich manipulation. Recent contact-implicit methods enable online hybrid planning across contact modes, allowing closed-loop manipulation for a given target state and contact location sequence of the robot and object. However, most existing approaches lack the ability to autonomously reason and generate diverse contact location sequences and manipulation trajectories, i.e., active contact location selection, which limits their applicability to relatively simple tasks. Active contact location selection is challenging due to complementarity in contact dynamics and the sparse gradients, making the design of a unified framework for contact selection and planning difficult. To address these challenges, we introduce Simultaneous Contact Selection and Planning (SCSP), a cascaded optimization framework comprising Contact Selection Optimization (CSO) and Contact Planning Optimization (CPO). CSO leverages a surrogate contact model and discrete-continuous optimization to efficiently resolve the nonsmoothness and coupling in contact selection, enabling online global searching of optimal contact locations. CPO performs prior-guided contact planning by evaluating the reference contact locations produced by CSO and generating corresponding manipulation trajectories in real time for redundant manipulators. Extensive simulations and real-world experiments demonstrate that SCSP produces diverse manipulation behaviors and robust control under inaccurate dynamics and perceptual noise. We further validate the generalization of the framework on challenging manipulation tasks. Project website: \href{https://sites.google.com/view/scsp-robot}{https://sites.google.com/view/scsp-robot}.

Planning the motion path for a tightly coupled dual-arm space manipulator under closed-chain constraints is a fundamental yet challenging problem in on-orbit assembly of large-scale space structures. The closed-chain constraints significantly reduce the feasible configuration space, making it difficult for existing planners to efficiently generate collision-free motions, especially in cluttered environments. To address this issue, this paper proposes a task-space constrained bidirectional rapidly-exploring random tree algorithm, termed TCBiRRT. Unlike conventional methods that operate in the high-dimensional configuration space, the proposed approach performs random sampling and node expansion directly in the task space defined by the manipulated object pose. A task-space node expansion strategy is developed to generate candidate object motions, which are then mapped to continuous joint paths using a path inverse kinematics algorithm. The method is further integrated with a bidirectional RRT framework and a regrasp mechanism to efficiently connect two random trees. Extensive simulations are conducted in representative on-orbit assembly scenarios with varying levels of environmental complexity. The results demonstrate that TCBiRRT achieves significantly higher success rates and orders-of-magnitude improvements in planning time compared to state-of-the-art planners. The proposed method provides an efficient and robust solution for motion planning of tightly coupled dual-arm space manipulators.

Robotic systems with redundant degrees of freedom can achieve the same task outcome using multiple configurations, resulting in solution sets that form manifolds in the configuration space. Existing approaches typically exploit such redundancy locally through Jacobian-based techniques to compute individual solutions or trajectories. While effective for solution computation, these methods do not retain a representation of the geometry of the solution set itself. In this work, we adopt a representation-centric approach to estimate the geometric structure of the solution space. We consider solution manifolds induced by general task-defining maps and construct an implicit scalar field over the configuration space, whose zero-level set corresponds to the solution manifold. To this end, we generate samples in the neighborhood of the solution manifold using a Jacobian-guided exploration strategy, which efficiently captures its local and global structure. The resulting implicit representation is defined over the configuration space and naturally induces a continuous, distance field that encodes proximity to the solution manifold. Experiments on a planar three-link robot and a seven-degree-of-freedom Franka manipulator demonstrate the effectiveness of the proposed representation. Furthermore, the framework enables consistent modeling of solution spaces across families of tasks with continuous variation.

Safety-critical control is essential for humanoid robots operating in complex human-centered environments, where physical safety constraints such as joint limits, self-collision avoidance, obstacle avoidance, and workspace boundaries must be satisfied during real-robot operation. However, existing approaches remain limited because kinematic safety guarantees can be degraded in the presence of unknown disturbances, such as model uncertainties, trajectory-tracking errors, and external perturbations. This paper presents a hierarchical safety-critical whole-body control framework for humanoid robots based on input-to-state safe control barrier functions (ISSf-CBFs). The proposed architecture integrates a kinematic-level whole-body controller (KinWBC), an ISSf-CBF safety filter, and a dynamic-level whole-body controller (DynWBC). KinWBC generates nominal joint-motion references from prioritized tasks; the ISSf-CBF filter minimally modifies these references to satisfy kinematic safety constraints under bounded disturbances; and DynWBC tracks the filtered references while enforcing full-body dynamic feasibility and contact stability. Safety constraints are imposed on a whole-body kinematic model, and the ISSf-CBF parameters are conservatively tuned so that the resulting kinematic safety guarantees can be transferred to full-order humanoid dynamics under unknown disturbances. Simulation and real-robot experiments demonstrate that the proposed framework improves safety margins under model mismatch and reliably enforces multiple safety constraints in real time during locomotion, teleoperation, and single-leg balancing with hand control. Project website: https://kwlee365.github.io/SafeWBC-Website/

The strong dynamic coupling between the manipulator and the base poses a significant challenge to maintaining spacecraft attitude stability, potentially compromising mission safety. In this paper, we propose a Dual-Agent Coordinated Manipulation Planning (DACMP) framework that simultaneously achieves high-precision end-effector pose reaching for a 6-DoF space manipulator and attitude stabilization of the base spacecraft. To enhance learning efficiency, we present a prior policy-guided Deep Reinforcement Learning algorithm incorporating the Timestep-level Expert Switching Guidance (TESG) mechanism, thereby promoting global convergence and improving task success rates. Extensive experiments demonstrate that DACMP significantly outperforms baseline DRL algorithms in terms of task success rate and control precision. Furthermore, the robustness of DACMP is validated under various challenging scenarios, including system constraints, environmental disturbances, and perception uncertainties. The code and simulation configurations are available on GitHub: https://github.com/HIT-YuhuiHu/DACMP.

Sampling-based model predictive control methods, such as Model Predictive Path Integral (MPPI), offer derivative-free optimization and robustness in complex robotic systems. However, standard MPPI relies on cost-based soft penalties that cannot guarantee hard-constraint satisfaction, severely limiting its applicability to highly constrained tasks such as closed-chain manipulation. To address this, we propose Manifold-Constrained MPPI (MC-MPPI), a real-time sampling-based control framework that enforces manifold-based equality constraints while preserving the computational advantages of MPPI. The key idea is to decouple the constrained optimal control problem into latent-space planning and execution-level correction. At the planning stage, a Variational Autoencoder (VAE) learns a low-dimensional latent representation of the constraint manifold, enabling MPPI to efficiently generate near-feasible candidate trajectories without per-sample modification. Since this reference enables accurate linearization of the equality constraints, an execution-level Quadratic Programming (QP) controller resolves the residual manifold mismatch in a single solve rather than through iterative projection. Experiments on a 14-DoF closed-chain dual-arm system in both simulation and real-world settings demonstrate that MC-MPPI operates stably at 100 Hz, reliably navigates dynamic environments while effectively maintaining hard equality constraints, and significantly outperforms baseline methods in tracking accuracy. Supplementary videos and implementation details are available at https://rcilab.github.io/mcmppi.

Inverse Kinematics (IK) plays a critical role in robotic motion planning and control. The IK solutions of a robot manipulator could be done by conventional ways such as geometric, algebraic, or Jacobian methods, which have drawbacks. The Artificial Neural Networks (ANNs) have become a promising alternative for approximating IK solutions due to their generalization ability and computational efficiency. This approach basically trains only a few samples of the end effector that are recorded for the solution of the IK problem. However, a fundamental question remains: how many training samples are sufficient to achieve reliable and accurate IK predictions? This study investigates the mathematical framework of relating the size of training datasets and the accuracy of ANN-based IK solvers. Using an articulated robotic manipulator, we generate varying amounts of joint-position pairs to train feedforward neural networks and assess their accuracy, convergence, and generalization capability. The results reveal more training samples than 125 did not contribute to the improvement of the model efficiency that the comparable measure dealing with the approximation accuracy over the sampling size, offering valuable insight into data efficiency. This work provides practical guidance for optimizing the data sizing of ANN solutions, balancing computational cost and model accuracy for real-world robotic applications.

Industrial robotic object handling often involves boxes and packages whose mass and center of mass are not known in advance. These uncertainties affect the force--moment balance required for stable lifting, and improper regulation of contact wrenches can lead to slip, object drop, orientation deviation, or excessive squeezing. This paper presents a friction-aware dual-arm box-handling framework for objects with unknown inertial properties. The proposed approach estimates the object mass and center of mass online from measured contact wrenches, and computes friction-feasible contact forces and torsional moments through a second-order cone program (SOCP) under ellipsoidal friction-limit-surface constraints. An offline trajectory refinement stage is also included to reduce undesired object--environment contact when geometric constraints are present. By enforcing friction feasibility as a hard constraint and minimizing contact effort within the feasible region, the framework achieves stable lifting without treating slip avoidance and excessive squeezing as separately tuned objectives. Experiments on a real dual-arm robotic system under different center-of-mass configurations demonstrate that the method lifts objects with unknown inertial properties while maintaining stable frictional contact.

Robotic systems are vulnerable to False Data Injection Attacks (FDIAs), where adversaries corrupt sensor signals to gain malicious control. Feedback linearization exposes robotic systems to integrator vulnerability, making them susceptible to stealthy attacks that can cause significant deviations in end-effector behavior without raising alarms. This paper addresses the resilience of manipulators against finite-horizon FDIAs by formalizing two defense methods, namely anomaly-aware virtual damping and manipulability reduction, with probabilistic guarantees on nominal task execution. Simulations on a 7-DOF redundant manipulator show that the proposed defenses substantially reduce the impact of FDIA compared to using solely a threshold-based ADS like the Chi-squared, while preserving nominal task performance in the absence of attack.

Flexible robotic manipulators (FRMs) offer advantages in lightweight design and large workspace, but their structural flexibility induces vibrations, accelerates fatigue, degrades tracking performance, and limits operational speed. These challenges are further amplified in multi-link serial manipulators, where increased overall length leads to greater structural flexibility. This article presents a backstepping output-feedback framework for fast vibration suppression and tip tracking of an n-degree-of-freedom serial flexible manipulator robot (nDSFMR), with a DeepONet-based approximation for practical deployment. Each link-joint is modeled as a Timoshenko beam coupled with an ODE and transformed into a canonical hyperbolic PDE with boundary dynamics. A backstepping-based boundary controller at the joint is developed to equivalently inject distributed damping along the beam, enabling rapid vibration suppression and trajectory tracking, only using available boundary measurements. To enable real-time implementation and scalability, a DeepONet neural operator is introduced to approximate the backstepping kernels, significantly reducing computational cost and facilitating fast controller updates under varying operating conditions. Experiments on a two-link flexible manipulator demonstrate faster vibration suppression and convergence of the end-effector to the desired trajectory, compared with a linear quadratic regulator (LQR) with feedforward control.

This work introduces a cooperative task capability improvement utilizing additional moments. The manipulators apply forces at the object's grasp point. Applying forces at a point other than the object's center of gravity produces undesired moments. The undesired moment acts as an additional moment. It improves the capability of an individual manipulator and, hence, the entire collaborative group. Any improvements in task capability directly add up to the object and transportation capability. The group's enhanced capability also helps achieve optimal capability, optimal resource allocation, and maximum fault tolerance in object manipulation. Our simulation results show an improvement in the capability of 5.86 % compared to when no moment is used to enhance the capability of the manipulators.

Open-source mobile manipulators have reached $660 (XLeRobot) but every sub-$1,000 platform shares three limitations: a fixed-height workspace, reactive-only control, and no protection against the stall-induced burn-out that destroys cheap Feetech servos. We present Nori Bot, a 17-DoF dual-arm mobile manipulator at $947 (~3% the cost of comparable commercial platforms) that addresses all three: (1) a 600mm Z-axis lift on the existing servo bus for floor-to-counter reach; (2) a thin-client Raspberry Pi 4 paired with the OpenClaw proactive agent runtime so cron jobs and hooks trigger physical tasks autonomously; and (3) a software safety stack with sensorless grip-force feedback via motor current on a soft TPU finger. Code, CAD, and the skill manifest will be released.

Legged manipulators extend robotic capabilities beyond static manipulation by integrating agile locomotion with versatile arm control. However, achieving precise manipulation while maintaining coordinated locomotion remains a major challenge. This work presents a hierarchical reinforcement learning framework for dynamic pick-and-place tasks using a quadruped equipped with a 6-DOF robotic arm. The framework incorporates an explicit mass estimation module enabling adaptive whole-body control for objects with varying weights. In simulation, the system achieves an 86.05% success rate with payloads up to 2.3 kg. The approach is further validated through real-world experiments across six representative scenarios with controlled variations in object physical properties (size and mass) and task heights. Specifically, within a wide vertical workspace ranging from ground level to 1.1~m-high tabletops, the system demonstrates an average success rate of 73.3% for payloads up to 1.3 kg, with an average execution time of 4.06 s. Unlike prior works that handle lightweight objects and execute pick-and-place motions with slow, piecewise motions, the proposed framework exploits concurrent locomotion and manipulation for dynamic, continuous execution. These results demonstrate the potential of quadrupedal mobile manipulators for adaptive, whole-body pick-and-place with heavier payloads and extended workspaces.

This paper presents an object manipulation strategy for the Variable Topology Truss (VTT) system, a truss robot that comprises actuated truss members connected by passive spherical joints. Although truss robots were originally proposed as rapidly deployable manipulators, manipulation strategy has not been studied thoroughly. To enable manipulation, we introduce a hybrid control framework that regulates position and force concurrently without explicit decoupling. At the actuator level, each member employs a sensor-based force feedback controller to generate the desired axial forces despite high actuator friction. At the task level, the forces applied at the end-effector nodes are produced by computing the required member forces using a static model of the VTT. We evaluate force-tracking performance through experiments on both a single member module and the full VTT system. Finally, we demonstrate object manipulation using two representative configurations and quantitatively assess combined position and force tracking performance. Experimental results confirm that the proposed approach enables consistent and reliable object manipulation with the VTT system.

This paper introduces a low-cost experimental mockup to simulate the laser cutting process of containers in nuclear decommissioning. It is composed of a three-axis table supporting a cuboid container with ultraviolet-sensitive faces, a six-degree-of-freedom serial manipulator holding an ultraviolet torch that simulates the laser, and a visual system based on cameras and fiducial markers. The system employs a constrained task-space adaptive motion controller that compensates for inaccurate parameters and eliminates the need to calibrate the system. Furthermore, as the motion controller explicitly accounts for geometric constraints, the robot reactively avoids collisions with obstacles while handling the ultraviolet torch. To improve the tracking of the laser-cutting path, we control the ultraviolet beam, which requires only four degrees of freedom, instead of the full end-effector pose. Experiments show that, despite an initially uncalibrated system, the overall system is capable of tracking different trajectories with an overall mean accuracy of 3.9 (sd 2.5) mm when the end-effector pose is controlled and 2.4 (sd 1.3) mm when the ultraviolet beam is controlled.

This paper presents a subsystem-based adaptive control framework for serial flexible manipulators with an arbitrary number of links, in which the elastic deformation PDE of each link is carried through the entire control design without spatial discretization or modal truncation. All dynamic quantities -- rigid-body motion, elastic deformation, and inter-link constraint forces -- are expressed uniformly as body-fixed twists and wrenches within the se3 Lie-algebraic structure. A controllable form of the per-link dynamics is derived by substituting the strain-based deformation PDE into the dynamic equation, eliminating distributed elastic acceleration and yielding a model governed by the body-fixed twist acceleration and deformation field. Desired subsystem twist trajectories are generated via a deflection-compensating inverse kinematics procedure. A nominal per-link controller is proven to produce exponential twist error decay via a per-subsystem Lyapunov function. An adaptive modification replaces exact physical parameters with online estimates governed by a projection-based law, augmenting with a parameter estimation error term. Upon summing over all links, the interaction power terms telescope to zero by Newton's third law and the frame invariance of the natural power pairing on se3se(3), establishing exponential convergence of all twist errors and bounded elastic deformation under both nominal and adaptive controllers. The screw-theoretic structure renders interaction term cancellation exact, making the stability certificate modular and scalable to chains of arbitrary length. The framework is validated numerically on a two-link flexible manipulator in three-dimensional motion.

This paper investigates singular configurations of planar 3-RPR parallel manipulators, which result from applying the averaging technique to solution pairs of their direct kinematic problem. Without computing the zeros of the corresponding degree 6 polynomial we parametrize the input pairs and determine their relative orientation in a way that the flexion order of the averaged configurations increases. Moreover, the obtained results are visualized for concrete examples. The presented methodology can also be used for studying the spherical and spatial analogues of planar 3-RPR parallel manipulators.

This paper presents a novel model predictive control (MPC) approach for autonomous pick-and-place between moving platforms with a hook-equipped aerial manipulator. First, for accurate and rapid modeling of the complex dynamics, a digital twin model of the quadcopter equipped with a hook-based gripper, implemented in MuJoCo, is constructed and used as the predictive model for the MPC. To handle uncertainties of the predictive model (e.g. due to aerodynamics and uncertain payloads), a robust adaptive MPC approach is proposed. By systematic integration of zero-order robust optimization (zoRO) based uncertainty propagation and an extended Kalman filter (EKF) for parameter estimation, the MPC algorithm ensures robust constraint satisfaction, high performance, and computational efficiency. The effectiveness of the proposed method is evaluated in complex simulated scenarios and in real-world flight experiments.

In this paper, we design feedback control laws for soft robots modelled using the Cosserat rod, which is spatially discretised using the Piecewise Constant Strain (PCS) approach. The PCS approach transforms the nonlinear PDEs describing the Cosserat rod to a system of nonlinear ODEs. This simplification results in a model describing soft robots which is similar to the serial rigid-link manipulators. We design feedback control laws for the quasi-static PCS model by using external wrenches as control inputs. The control laws are designed based on state-feedback linearisation in strain and task spaces. An extensive set of numerical results demonstrates the performance of the control laws for end-effector trajectory tracking and shape control of soft robots.

This paper discusses null-space wrench components in parallel manipulators. We examine the adaptation of the two most common characterizations of these components in grasp-like systems, namely, interaction forces and internal loads, to parallel manipulators with actuation redundancy. We identify critical oversights in the existing literature on the subject, resolve ambiguities related to the definitions of interaction forces and internal loads, and provide explicit methods for synthesizing equilibrating and manipulating joint torque vectors. A case study is also provided to justify the validity of our novel methods and correct erroneous results reported in the literature.

An asymmetric two-link robot supported atop a flat platform by wheels that roll and pivot freely, but do not slip laterally, will develop forward momentum if the joint between the links is actuated internally. In particular, oscillations in the joint angle will generate undulatory locomotion suggesting fishlike swimming. If two such robots surmount a common platform that's free to translate with its own inertial dynamics, then the individual robots' dynamics will be coupled so that the locomotion of either robot is affected by that of the other. We develop a mathematical model for this system and present simulations demonstrating its behavior. We then consider a single robot with an unactuated joint rolling atop a platform that moves under control, and show that actuation of the platform is sufficient to dictate the robot's behavior. In particular, with the acceleration of the platform as an input, the robot's heading can be made to track a chosen function of time. This is sufficient to guarantee that the robot can be induced to orbit a fixed point on the platform or to locomote persistently in a desired direction.

Collision avoidance for robotic manipulators requires enforcing full-body safety constraints in high-dimensional configuration spaces. Control Barrier Function (CBF) based safety filters have proven effective in enabling safe behaviors, but enforcing the high number of constraints needed for safe manipulation leads to theoretic and computational challenges. This work presents a framework for full-body collision avoidance for manipulators in dynamic environments by leveraging 3D Poisson Safety Functions (PSFs). In particular, given environmental occupancy data, we sample the manipulator surface at a prescribed resolution and shrink free space via a Pontryagin difference according to this resolution. On this buffered domain, we synthesize a globally smooth CBF by solving Poisson's equation, yielding a single safety function for the entire environment. This safety function, evaluated at each sampled point, yields task-space CBF constraints enforced by a real-time safety filter via a multi-constraint quadratic program. We prove that keeping the sample points safe in the buffered region guarantees collision avoidance for the entire continuous robot surface. The framework is validated on a 7-degree-of-freedom manipulator in dynamic environments.

Shared Control methods often use impedance control to track target poses in a robotic manipulator. The guidance behavior of such controllers is shaped by the used stiffness gains, which can be varying over time to achieve an adaptive guiding. When multiple target poses are tracked at the same time with varying importance, the corresponding output wrenches have to be arbitrated with weightings changing over time. In this work, we study the stabilization of both variable stiffness in impedance control as well as the arbitration of different controllers through a scaled addition of their output wrenches, reformulating both into a holistic framework. We identify passivity violations in the closed loop system and provide methods to passivate the system. The resulting approach can be used to stabilize standard impedance controllers, allowing for the development of novel and flexible shared control methods. We do not constrain the design of stiffness matrices or arbitration factors; both can be matrix-valued including off-diagonal elements and change arbitrarily over time. The proposed methods are furthermore validated in simulation as well as in real robot experiments on different systems, proving their effectiveness and showcasing different behaviors which can be utilized depending on the requirements of the shared control approach.

Many mechanical systems exhibit changes in their kinematic topology altering the mobility. Ideal contact is the best known cause, but also stiction and controlled locking of parts of a mechanism lead to topology changes. The latter is becoming an important issue in human-machine interaction. Anticipating the dynamic behavior of variable topology mechanisms requires solving a non-smooth dynamic problem. The core challenge is a physically meaningful transition condition at the topology switching events. Such a condition is presented in this paper. Two versions are reported, one using projected motion equations in terms of redundant coordinates, and another one using the Voronets equations in terms of minimal coordinates. Their computational properties are discussed. Results are shown for joint locking of a planar 3R mechanisms and a 6DOF industrial manipulator.

This paper investigates the control problem of dual-arm unmanned aerial manipulator systems (DAUAMs). Strong coupling between the dual-arm and the multirotor platform, together with unmodeled dynamics and external disturbances, poses significant challenges to stable and accurate operation. An adaptive event-triggered control scheme with neural network-based approximation is proposed to address these issues while explicitly considering communication constraints. First, a dynamic model of the DAUAM system is derived, and a command-filter-based backstepping framework with error compensation is constructed. Then, a neural network is employed to approximate external frictions, and an event-triggered mechanism is designed to reduce the transmission frequency of control updates, thereby alleviating communication and energy burdens. Lyapunov-based analysis shows that all closed-loop signals remain bounded and that the tracking error converges to a neighborhood of the desired trajectory within a fixed time. Finally, experiments on a self-built DAUAM platform demonstrate that the proposed approach achieves accurate trajectory tracking.

Research on mobile manipulation systems that physically interact with humans has expanded rapidly in recent years, opening the way to tasks which could not be performed using fixed-base manipulators. Within this context, developing suitable control methodologies is essential since mobile manipulators introduce additional degrees of freedom, making the design of control approaches more challenging and more prone to performance optimization. This paper proposes a control approach for a mobile manipulator, composed of a mobile base equipped with a robotic arm mounted on the top, with the objective of minimizing the overall kinetic energy stored in the whole-body mobile manipulator in physical human-robot interaction applications. The approach is experimentally tested with reference to a peg-in-hole task, and the results demonstrate that the proposed approach reduces the overall kinetic energy stored in the whole-body robotic system and improves the system performance compared with the benchmark method.

Underground mining robots are increasingly modeled for planning, operator training, and digital-twin workflows, where reliable actuator-level kinematics is needed to reduce hazardous in situ trials. Unlike typical open-chain industrial manipulators, representative mining machines are often linear-actuator-driven closed-chain mechanisms with planar four-bar linkages, making reusable kinematic modeling and real-time FK/IK solving challenging. We present \textit{\hl{MineRobot}}, an actuator-centered framework for modeling and solving the kinematics of this representative mechanism class. MineRobot introduces the Mining Robot Description Format (MRDF), a domain-specific representation that parameterizes mining-robot kinematics with native semantics for actuators and loop closures. It then contracts planar four-bar substructures into generalized joints and extracts, for each actuator, an Independent Topologically Equivalent Path (ITEP) classified into four canonical types. Based on this decomposition, per-type solvers are composed into a sequential forward-kinematics (FK) pipeline, while inverse kinematics (IK) is formulated as a bound-constrained actuator-length optimization solved by a Gauss--Seidel-style update scheme. By converting coupled closed-chain kinematics into small topology-aware solves, MineRobot reduces robot-specific hand derivations and supports efficient repeated FK/IK computation without treating each query as a full coupled constraint-solving problem. Experiments on representative underground mining robots demonstrate real-time FK performance and robust IK convergence within the tested operating ranges, supporting the use of MineRobot as an actuator-centered kinematic layer for planning, training, and digital-twin workflows.

Cooperative transport and manipulation of heavy or bulky payloads by multiple manipulators requires coordinated formation tracking, while simultaneously enforcing strict safety constraints in varying environments with limited communication and real-time computation budgets. This paper presents a distributed control framework that achieves consensus coordination with safety guarantees via hierarchical event-triggered control barrier functions (CBFs). We first develop a consensus-based protocol that relies solely on local neighbor information to enforce both translational and rotational consistency in task space. Building on this coordination layer, we propose a three-level hierarchical event-triggered safety architecture with CBFs, which is integrated with a risk-aware leader selection and smooth switching strategy to reduce online computation. The proposed approach is validated through real-world hardware experiments using two Franka manipulators operating with static obstacles, as well as comprehensive simulations demonstrating scalable multi-arm cooperation with dynamic obstacles. Results demonstrate higher precision cooperation under strict safety constraints, achieving substantially reduced computational cost and communication frequency compared to baseline methods.

Flexible endoscopic continuum manipulators offer high dexterity and access to complex anatomy, but nonlinear hysteresis limits feedforward control accuracy. Closed-loop control can compensate for these errors but requires accurate six-degree-of-freedom (6D) end-effector pose feedback. We present MarUco, a markerless 6D pose estimation framework for closed-loop control using only stereo vision during operation. A photorealistic pseudo-rigid-body simulation pipeline generates large-scale annotated training data without manual labeling. A multifeature fusion network integrates masks, keypoints, heatmaps, and bounding boxes from both stereo views to estimate an initial pose, followed by a learned single-pass render-and-compare module that refines the pose without iterative optimization. Kinematics-free hand-eye calibration estimates camera-to-robot-base extrinsics, and self-supervised adaptation uses unlabeled real stereo pairs to mitigate sim-to-real pose error. Across 1,000 real samples, MarUco achieves translation and rotation errors of 0.78 $\pm$ 0.50 mm and 3.07 $\pm$ 1.25°, respectively, with a total processing time of 52.4 ms per stereo pair. In closed-loop experiments over eight reference paths, MarUco achieves a mean terminal translation error of 1.8 mm, an 88% reduction relative to uncompensated open-loop control. To the best of our knowledge, this is the first markerless position-based visual servoing framework for continuum manipulators.

With the explosive growth of rigid-body simulators, policy learning in simulation has become the de facto standard for most rigid morphologies. In contrast, soft robotic simulation frameworks remain scarce and are seldom adopted by the soft robotics community. This gap stems partly from the lack of easy-to-use, general-purpose frameworks and partly from the high computational cost of accurately simulating continuum mechanics, which often renders policy learning infeasible. In this work, we demonstrate that rapid soft robot policy learning is indeed achievable via implicit time-stepping. Our simulator of choice, DisMech, is a general-purpose, fully implicit soft-body simulator capable of handling both soft dynamics and frictional contact. We further introduce delta natural curvature control, a method analogous to delta joint position control in rigid manipulators, providing an intuitive and effective means of enacting control for soft robot learning. To highlight the benefits of implicit time-stepping and delta curvature control, we conduct extensive comparisons across four diverse soft manipulator tasks against one of the most widely used soft-body frameworks, Elastica. With implicit time-stepping, parallel stepping of 500 environments achieves up to 6x faster speeds for non-contact cases and up to 40x faster for contact-rich scenarios. Finally, a comprehensive sim-to-sim gap evaluation--training policies in one simulator and evaluating them in another--demonstrates that implicit time-stepping provides a rare free lunch: dramatic speedups achieved without sacrificing accuracy.

Robotic fabric manipulation remains challenging due to fabric deformability and occlusions from wrinkles and the manipulator. This paper defines Random-to-Target Fabric Flattening (RTFF) as the task of bringing a randomly wrinkled fabric to an arbitrary user-specified wrinkle-free target pose. RTFF requires simultaneous flattening and pose alignment, where the two objectives are inherently coupled since flattening the fabric displaces its pose, while realigning it tends to introduce wrinkles. To solve this task, this paper anchors both the current and target fabric states to the same template mesh, enabling direct vertex-level wrinkle and pose assessment without registration. Building on this representation, a hybrid Imitation Learning--Visual Servoing (IL--VS) RTFF policy is proposed. A novel Mesh Action Chunking Transformer (MACT) leverages structured mesh observations to achieve goal-conditioned coarse alignment from a compact demonstration set, after which VS ensures precise convergence to the target. The policy is validated on a real dual-arm teleoperation system, demonstrating precise alignment to unseen target poses, fabric types, and scales. Code and videos: https://kaitang98.github.io/RTFF_Policy/

In physical human-robot collaboration (pHRC) settings, humans and robots collaborate directly in shared environments. Robots must analyze interactions with objects to ensure safety and facilitate meaningful workflows. One critical aspect is human/object detection, where the contacted object is identified. Past research introduced binary machine learning classifiers to distinguish between soft and hard objects. This study improves upon those results by evaluating three-class human/object detection models, offering more detailed contact analysis. A dataset was collected using the Franka Emika Panda robot manipulator, exploring preprocessing strategies for time-series analysis. Models including LSTM, GRU, and Transformers were trained on these datasets. The best-performing model achieved 91.11% accuracy during real-time testing, demonstrating the feasibility of multi-class detection models. Additionally, a comparison of preprocessing strategies suggests a sliding window approach is optimal for this task.

This paper presents an immersive bilateral teleoperation framework for beyond-human-scale manipulators, combining motion/force transparency with enhanced operator embodiment through virtual reality (VR) and distributed haptic feedback. The platform integrates a full-scale industrial hydraulic manipulator, a 7-DoF haptic exoskeleton, and head-tracked visual feedback to reinforce operator agency and self-location. A force-sensorless adaptive controller incorporates an augmented human-robot dynamic model to address master-surrogate asymmetries, input nonlinearities, model uncertainties, and communication delays. Rigorous analysis establishes semi-global uniform ultimate boundedness of the closed-loop system. Extensive full-scale experiments demonstrate precise motion and force tracking with scaling up to 1:13 and 1:1000, respectively, and fixed or time-varying delays up to 150 ms. Coordinated 6-DoF pick-and-place and multi-axis contact tasks further validate system performance. A ten-participant user study supports system usability and indicates approximately 50% higher normalized embodiment scores with VR than with monitor-based feedback. These results advance intuitive, force-reflected remote manipulation at industrial scale.

This paper investigates whether sequential context improves goal-conditioned Reinforcement Learning in sparse-reward manipulation tasks. While Hindsight Experience Replay (HER) addresses reward sparsity through goal relabeling, its operation on isolated transitions limits its ability to capture temporal dependencies inherent in joint-space control. We hypothesize that incorporating motion history can enhance policy learning and introduce CONTHER, which integrates a Transformer-based architecture with a modified HER replay buffer. The Transformer encodes sequences of prior states and goals to provide temporal awareness, while the buffer populates experience with artificially successful trajectories. Two architectural variants are analyzed to examine how contextual information should be integrated. In simulated point-reaching tasks with a UR3 manipulator, CONTHER achieves a 38.46% higher average success rate compared to baselines and outperforms the strongest baseline by 28.21%, with faster convergence and more stable learning. The framework is further evaluated on three dynamic tasks requiring complex trajectory following and obstacle avoidance, where temporal context is critical. By operating directly on joint velocities, the approach provides a foundation for transfer to physical systems. The primary contribution is a systematic investigation into fusing sequential context with goal relabeling, offering insights into how temporal awareness benefits policy learning.

This paper presents a novel approach to real-time safety monitoring in human-robot collaborative manufacturing environments through a wrist-mounted Inertial Measurement Unit (IMU) system integrated with a Predictive Safety Model (PSM). The proposed system extends previous PSM implementations through the adaptation of a spring-damper-mass model specifically optimized for wrist motions, employing probabilistic safety assessment through impedance-based computations. We analyze our proposed impedance-based safety approach with frequency domain methods, establishing quantitative safety thresholds through comprehensive comparative analysis. Experimental validation across three manufacturing tasks - tool manipulation, visual inspection, and pick-and-place operations. Results show robust performance across diverse manufacturing scenarios while maintaining computational efficiency through optimized parameter selection. This work establishes a foundation for future developments in adaptive risk assessment in real-time for human-robot collaborative manufacturing environments.

This paper outlines the specifications and design approach used to construct a full body imaging scanner capable of capturing skin lesions at a dermatoscopic level using cameras mounted on the end-effectors of four UR10 manipulators. The system possesses a view-planning algorithm capable of appropriately selecting the best camera position to acquire images of moles, a high-level controller to allow the manipulators to work simultaneously and a collision-detector that halts the manipulators when they make contact with an object or a person. We evaluate the system through real-patient full-body scans, comparing acquired images against contact dermoscopy and an existing total-body photography system (Vectra) across clinically relevant lesion features, and quantify true optical resolving power using a USAF 1951 resolution target, yielding a smallest resolvable feature size of 22.1 microns for our scanner compared to 8.8 microns for contact dermoscopy. Results show the scanner consistently outperforms Vectra across most clinically relevant features and achieves comparable performance to contact dermoscopy for the majority of features assessed. By acquiring dermatoscopic-quality images automatically and without contact, and without requiring a separate manual dermoscopic examination, the scanner closes part of the gap between total-body photography and handheld dermoscopy, suggesting potential for future integration into screening workflows.