Overview

Vehicle-dynamics research models how forces and motion interact, helping predict behavior and keep cars, trucks, motorcycles, and mobile robots safe and controllable. Approaches range from physics-based bicycle, tire, and multibody models to learned or hybrid methods such as Gaussian processes, Koopman models, and neural state-space models, often informed by system identification and onboard sensors. These models support model predictive control, stability and safety constraints, and reinforcement learning in settings from autonomous racing to rough terrain, with evaluation in simulation and on real vehicles. A central challenge is ensuring that accurate predictions also produce reliable closed-loop control across changing surfaces, speeds, and vehicle configurations without sacrificing safety for performance.

Latest papers

84 papers9 papers in the last four weeks, down 31% on the four weeks before. 0.1% of all new papers.

Aug 31, 2026

Optimized Modular Design and Development of a Tilt-Rotor Bicopter Drone

Hybrid systems like tilt-rotor bicopter drones combine the beneficial characteristics of both fixed-wing and rotary-wing technology, enabling long endurance and VTOL capability. However, such drones also require an optimum design to ensure both static and dynamic stability. The modular design of a traditional bicopter is developed in this paper based on extensive analysis and in-depth structural and aerodynamic simulations. The structural analysis has been performed to ensure that the aircraft's structure withstands the stresses encountered during different flight modes. Controlling the relative positions of the Center of Gravity (CG) and Neutral Point (NP) is an essential aspect of the design, ensuring stability during hover and positive stability during forward flight. The thrust and power analyses have been conducted to assess the flight performance and endurance. After analysis, the drone has been developed, and flight tests with a basic flight controller were conducted to validate the performance metrics obtained in the simulation.
Aug 28, 2026

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap3 to 25.50 s on Lap12, with drift first emerging on Lap11. Lap12 reaches 16.5∘^\circ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.
Aug 20, 2026

DART-S: Reachability-Audited Active-Suspension Preconditioning for Off-Road Vehicle Jumps

Airborne torque reaction cannot recover takeoff errors beyond the wheel angular-momentum budget. DART-S applies ramp-face suspension preconditioning to change pitch, pitch rate, and wheel spin before liftoff, thereby shifting the queried state and altering the remaining authority budget. To predict how each suspension action reshapes this state-budget pair, DART-S employs a local calibration map. A support-aware selector combines the predicted shift with local outcome evidence and an interval-reachability screen; an exact-pair audit reports residual authority. Across 600 new runs in 72 independent BeamNG sessions, every positive, negative, and boundary query follows its prespecified branch. At the confirmed 40°/13 m/s boundary, DART-S attains 24/24 post-touchdown attitude-criterion successes versus 0/24 for DART (session-level Holm-adjusted p=0.0234). At 11.5 m/s, a 0.35 s timing action attains 23/24 versus 0/24 for the static preset (p=0.0156). The 200 rad/s command guard keeps drivetrain hard-limit exceedance at zero across all 600 runs. The source code will be available at https://github.com/MeridianCAS/DART-S
Aug 18, 2026

Stability Control for Real World Testing in Autonomous Racing

Controlling an autonomous vehicle at the limits of handling is a challenging task. Due to external influences, such as road conditions or weather, a vehicle can easily become unstable. Since most control algorithms assume stable vehicle behavior, they might fail in these situations. Especially when operating expensive vehicles without a safety driver on board, as in autonomous racing, this poses a significant challenge. To enable safe operation at the vehicle's dynamic limits, we present a comprehensive stability control system that safeguards motion control algorithms in autonomous driving. The proposed system consists of an electronic stability control (ESC), a slip control (SC), and a countersteer system (CS), which collectively adapt steering and brake commands from the motion controller to maintain vehicle stability. We validate our approach through both simulation and experiments on a real-world, full-scale vehicle. The results show that the stability control system maintains vehicle stability in critical situations and extends the operational feasible region. To simplify integration, we provide an open-source implementation at github.com/TUMFTM/tam-stability-control.
Aug 11, 2026

A Neural Network Based Teleoperation for Remote Controlled Vehicles

Direct teleoperation of vehicles faces critical technical bottlenecks: communication latency and the operator's inability to physically perceive unmodeled environmental disturbances (e.g., aerodynamic drag, bank angles) coupled with highly nonlinear tire-road dynamics. To address these challenges, we propose a tailored unilateral teleoperation framework. The system integrates the Wave Variable (WV) approach to passively guarantee stability under stochastic delays, and an adaptive Radial Basis Function Network (RBFN) to actively compensate for vehicle-specific uncertainties. Unlike existing WV-neural network architectures designed for bilateral robotic arms, our framework features decoupled adaptive laws specifically designed for vehicle longitudinal and lateral dynamics. Furthermore, compared to model-heavy predictive controllers, the model-free RBFN offers rapid online adaptation without heavy computational overhead. Building upon our preliminary theoretical formulation, this brief paper presents comprehensive comparative analyses and real-world hardware validations. Simulation benchmarks against PID, LQR, MPC, and NMPC demonstrate that the RBFN achieves superior robustness against unmodeled disturbances while requiring orders of magnitude less execution time than MPC and NMPC, making it ideal for resource-constrained vehicle edge computing. Finally, hardware-in-the-loop experiments using a 1/10th scale vehicle over a 4G network validate the system's practical feasibility, safety, and robust trajectory tracking under physical road uncertainties.
Aug 10, 2026

Predictive safety filter enhanced curriculum learning control for efficient vehicle dynamics controller

Recent advances in learning-based control have enabled impressive achievements in solving complex control problems in various domains. However, since learning-based control may not be able to realize safety-guaranties, it is of great importance to enhance safety and robustness while maintaining good performances. Take vehicle motion & dynamics control as an example, in order to overcome the pain points of traditional methods such as heavy parameter calibration effort and learning-based control to bring better performance and efficiency in stability & agility over prior work for state-based vehicle control tasks, in this work, our method aims to develop a curriculum learning controller enhanced with physics-based predictive safety filter. The validation is conducted with the Python-CarSim platform, demonstrating better improvements and scalability under various maneuvers.
Aug 10, 2026

Beyond the Plane: Coupling Planar Vehicle Dynamics with Three-Dimensional Road Geometry

Simulation is crucial for developing and testing autonomous driving systems. In particular, the development of localization and control algorithms relies on an accurate vehicle dynamics simulation. However, most vehicle dynamics models are two-dimensional while real-world roads are three-dimensional. For example, effects from the three-dimensional road geometry on the Las Vegas Motor Speedway can increase the normal forces on the tires by more than 66% compared to the nominal load at standstill. As a result, even highly detailed planar vehicle dynamics models struggle to accurately reproduce the real vehicle's behavior. While solutions for three-dimensional vehicle dynamics exist, they are rarely adopted, computationally expensive, and complex. To address this issue, we present a novel method to couple planar vehicle dynamics models with real-world three-dimensional road geometry. We transform the planar vehicle state from the vehicle model's two-dimensional plane to its corresponding representation in three-dimensional space. Additionally, we calculate road-geometry-induced forces and moments and apply them to the planar vehicle model. We validate our approach using high-speed data recorded with a full-scale race car on the banked Las Vegas Motor Speedway. Furthermore, on synthetic tracks, we show that our method yields accurate results even in edge cases. Together, our results demonstrate that the gap between planar simulation and real-world three-dimensional roads can be closed without abandoning simpler planar models. To simplify adoption of our method, we provide the implementation as open-source software on github.com/TUMFTM/3d-road-geometry-coupling.
Aug 8, 2026

Parameter-Dependent LMI Synthesis for Semi-Global Differential ISS Trajectory Tracking of Nonholonomic Mobile Robots Under Multiplicative Wheel Slip

This paper presents a parameter-dependent linear matrix inequality (LMI) synthesis framework for trajectory tracking of nonholonomic mobile robots subject to multiplicative wheel slip. A sampled polytopic convex formulation jointly targets four design objectives on the variational dynamics in Kanayama coordinates: a prescribed exponential decay rate, an H-infinity disturbance-to-error gain, regional pole placement, and a weighted gain bound acting as a design-time actuator budget. The inverse metric and the auxiliary gain are parameterized affinely in the reference linear and angular velocities. A Slip-to-Disturbance Lemma provides an explicit closed-form upper bound on the additive disturbance equivalent to bounded multiplicative wheel slip in Kanayama coordinates, connecting the physical slip mechanism to the convex synthesis. The dissipation inequality is established at the sixteen vertices of the parameter-rate polytope, and a Lipschitz-based residual condition is given as a sufficient criterion for extending feasibility to interior points; the regions where the criterion succeeds for the synthesized controller, and where it does not, are both reported. An integral representation of the Kanayama residual lifts the variational certificate to a pointwise exponential-plus-ISS bound on the trajectory error directly from the LMI. The certified envelope is the semi-global ball at sigma_bar = 0.10; variable-terrain tests at slip ratios up to plus-minus 50% are reported as empirical observations outside that envelope. In the certified regime, the LPV controller and a fixed-gain LMI baseline produce quantitatively similar tracking records; on the severe-slip probes, the parameter-dependent design retains modest reproducible margins over both the fixed-gain and the classical Kanayama baselines.
Aug 5, 2026

muSync-GS: Physics-Synchronized Driving Video Synthesis for Weather and Geometric Road Hazards

High-quality driving data are essential for autonomous-driving systems and generative world models. However, rare and safety-critical scenarios involving adverse weather, braking under low tire--road friction, and uneven road geometry are costly and risky to collect at scale. Existing video-generation and 3D Gaussian editing methods can modify weather appearance or road geometry, but typically do not couple these edits with tire--road interaction and vehicle dynamics. As a result, an edited video may retain its original trajectory even when the modified road condition should alter braking, wheel slip, load transfer, and ego-camera motion. We present muSync-GS, a physics-synchronized framework for driving video synthesis under adverse-weather and road-elevation hazards. A precipitation-derived road-surface condition jointly controls road appearance and tire friction, while a shared road-elevation profile drives both visible road-geometry editing and axle excitation. A calibrated vehicle model predicts speed, slip ratio, normal loads, and pitch for constructing the ego-camera trajectory and synchronized physical annotations. On 12 held-out CarSim cases spanning precipitation levels, brake inputs, and road-profile parameters, the model achieves mean case-wise RMSEs of 0.0273 m/s for speed, 0.0590 degrees for pitch, 0.0101 for slip ratio, and 26.61 N for per-wheel normal load. Together with the reconstructed-scene experiments, these results show that muSync-GS accurately reproduces vehicle responses under held-out controls while synchronizing them with controllable scene edits and ego-camera motion.
Aug 2, 2026

VertiAKD: Adaptive Off-Road Kinodynamics on Vertically Challenging Terrain

Off-road mobility requires autonomous mobile robots to generalize across heterogeneous vehicle fleets and continuously changing terrain conditions. Existing cross-vehicle adaptation approaches generally assume flat terrain, while terrain-aware kinodynamic models often require platform-specific data collection and retraining. To this end, we propose VertiAKD, a unified framework for transferring and adapting off-road kinodynamic knowledge across diverse vehicles on geometrically and semantically complex terrain simultaneously. VertiAKD learns a shared mobility representation that jointly encodes vehicle configurations, trajectory transitions, and local elevation and semantic terrain features. Given limited data from a novel vehicle operating on unseen terrain, VertiAKD identifies the most relevant mobility descriptors and transfers their knowledge to initialize a terrain-aware kinodynamic model via function encoders, which is then periodically refined online from streaming observations without gradient-based retraining. We evaluate VertiAKD in the Verti-Bench simulator, built on the Chrono multi-physics engine, and on five physical configurations of the Verti-4-Wheeler platform. With only one minute of new trajectory data and associated terrain features, VertiAKD reduces long-horizon prediction error by up to 34.52% over direct mobility descriptor transfer across diverse unseen vehicle configurations and 94.43% over competing baselines. We further demonstrate robust closed-loop trajectory tracking in both simulation and physical experiments, highlighting the effectiveness of terrain-aware cross-vehicle knowledge transfer for accurate modeling and reliable off-road navigation.
Jul 31, 2026

DART: Dual-Axis Airborne Reachability-Gated Torque-Reaction for Off-Road Vehicle Jumps

Traversing crests, ledges, and ditches at high speed often launches vehicles into the air, and a mishandled landing presents a substantial crash hazard. We show that the airborne phase is barely controllable: on a 1383 kg platform the wheel angular-momentum budget caps the recoverable pitch-rate change at roughly 99-13∘13^\circ/s in the tighter nose-up direction under drive at typical takeoff wheel speeds, and at about twice that in the reverse-inclusive braking direction; driving the wheels to their drivetrain hard limit raises the measured nose-up ceiling to only 1616-18∘18^\circ/s. Takeoff pitch-rate disturbances beyond this directional budget are physically unrecoverable in flight, so the decisive leverage lies before takeoff. DART (Dual-Axis Airborne Reachability-Gated Torque-Reaction) back-propagates the landing constraint into a closed-form certified feasible-takeoff set, which supplies a conservative go/no-go condition and a pre-takeoff speed-shaping law. In flight, DART regulates pitch and roll via steer-resolved wheel-reaction torque, governed by a per-flight roll latch derived from the yaw-coupling analysis. In deterministic full-scale simulation in BeamNG.tech, a calibrated pre-takeoff speed regulator reduces touchdown speed by 36% and raises on-target landings from 0/30 to 30/30. Under the same steep-lip approach the airborne law completes 29/30 safe landings under crash-avoidance bounds versus 0/30 for reaction-wheel-style PD (RW-PD) and time-optimal bang-bang (TOBB). On banked run-ups DART holds the median pitch error at or below 2∘2^\circ at every cross-slope, with the largest baseline separation at γ=12∘γ=12^\circ. Across disturbance regimes, the latch preserves pitch-only allocation on low-disturbance entries and enables dual-axis control when roll becomes binding. All results are from simulation; hardware validation remains open.
Jul 28, 2026

MetaKoopman: Bayesian Meta-Learning of Koopman Operators for Modeling Structured Dynamics under Distribution Shifts

Modeling and forecasting nonlinear dynamics under distribution shifts is essential for robust decision-making in real-world systems. In this work, we propose MetaKoopman, a Bayesian meta-learning framework for modeling nonlinear dynamics through linear latent representations. MetaKoopman learns a Matrix Normal-Inverse Wishart (MNIW) prior over the Koopman operator, enabling closed-form Bayesian updates conditioned on recent trajectory segments. Moreover, it provides a closed-form posterior predictive distribution over future state trajectories, capturing both epistemic and aleatoric uncertainty in the learned dynamics. We evaluate MetaKoopman on a full-scale autonomous truck and trailer system across a wide range of adverse winter scenarios, including snow, ice, and mixed-friction conditions, as well as in simulated control tasks with diverse distribution shifts. MetaKoopman consistently outperforms prior approaches in multi-step prediction accuracy, uncertainty calibration, and robustness to distributional shifts. Field experiments further demonstrate its effectiveness in dynamically feasible motion planning, particularly during evasive maneuvers and operation at the limits of traction. Project website: https://mahmoud-selim.github.io/MetaKoopman/
Jul 26, 2026

Steeringless Drifting: Differential-Torque Control of a Four-Wheel Independently Driven Vehicle

Control methods for emerging vehicle chassis architectures are important for autonomous driving near handling limits. Unlike conventional drift control, which relies on mechanical steering and rear-tire saturation, a steering-free four-wheel independently driven (4WID) vehicle can generate direct yaw moment through differential wheel torques. This paper proposes a differential-torque drift control method for such a vehicle. A double-track vehicle model incorporating four-wheel differential actuation is established, based on which a drift-equilibrium calculation method and a closed-loop drift controller are developed. The proposed approach is validated through simulations and experiments on a 1:10-scale vehicle. The results show that the vehicle can achieve steady circular drifting with a sideslip angle of approximately 20∘^\circ and perform figure-eight drift tracking. This study demonstrates the feasibility of drift control using only differential wheel torques and provides a new perspective on near-limit control for steering-free vehicle architectures.
Jul 22, 2026

Digital Twin Modeling of a Highly Automated Agricultural Tractor

In efforts to increase research efficiency and availability, a digital twin of our research tractor (AMX G-trac) is created, focusing especially on the CAN communication for data reading and actuation command following the ISOBUS protocol. Mevea Simulation Software is utilized as the foundation, providing the kinematic model and visuals, while Python is used to read and write CAN messages over a Kvaser CanKing virtual CAN channel. Various performance tests involving straight line and turning behavior are performed in both the digital twin simulation and in the real world to measure similarity. Results indicate that the Mevea model behaves very comparable in its lateral dynamics, often within 5-10 percent, but requires better data to fully capture the longitudinal aspects like acceleration. The final model described in this paper sets the table for a second iteration to include more tractor functions such as hydraulics and tractor-implement dynamics.
Jul 21, 2026

Emergent Autonomous Drifting for Collision Avoidance in Real-World Winter Driving Scenarios

Real-world collision avoidance is a core motivation for studying the dynamics and control of high sideslip drifting in vehicles, yet the practical benefit of such maneuvers has so far primarily been tested in scenarios explicitly engineered to require drifting. In this work, we explore the question of if and when drifting may be optimal for safety in real-world winter driving conditions. We present a drift-capable nonlinear model predictive control (MPC) system designed to handle scenarios grounded in crash fatality data and deploy the controller in a high fidelity simulator across road departure and oncoming vehicle collision avoidance scenarios. The controller naturally initiates and sustains drifting maneuvers to stay on the road when hitting a patch of ice on the rear axle and to avoid an oncoming vehicle that has slid into its lane. Comparisons with a benchmark electronic stability control (ESC) system demonstrate how a drift-capable controller can trade off stability for controllability to precisely maneuver through dangerous winter driving scenarios. A Monte Carlo study over random ice patches further shows that the drift-capable controller achieves lower median lane error than ESC across several speeds, while revealing that drifting emerges predominantly at higher speeds.
Jul 15, 2026

nuTruck: Benchmarking Autonomous Driving Planning for Distributed Electric-drive Trucks

The dominance of traditional rule-based methods in autonomous driving has gradually been replaced by learning-based approaches. While learning-based planners have achieved considerable success in passenger vehicles, their performance on heavy-duty trucks, particularly modern distributed electric-drive trucks (DETs), remains largely unexplored. To facilitate research and application of learning-based planners in DETs, this letter presents the first high-fidelity benchmark, called nuTruck, designed to support large-scale neural network training and closed-loop evaluation. Given the complex dynamics and high rollover susceptibility of DETs, we first incorporate a highly accurate nonlinear truck dynamical model into the simulation, which enables independent driving and steering of all wheels and captures dynamic load transfer caused by acceleration, deceleration, and cornering, thereby allowing quantitative assessment of rollover risk in closed-loop simulation. Second, we adapt several rule-based and learning-based planners as baselines for DETs and evaluate their performance in closed-loop simulation. Finally, using real-world driving scenarios from the nuPlan dataset, we conduct extensive closed-loop evaluations, analyzing not only conventional collision-free planning performance, but also the dynamical safety of the planned trajectories. The proposed nuTruck benchmark is expected to serve as a new standard for fair and realistic evaluation of autonomous driving planners on DETs.
Jul 15, 2026

Ego-Dynamics-Augmented World Model for Autonomous Driving with Zero-Shot Cross-Embodiment Adaptation

End-to-end autonomous driving requires generalization ability across platforms with dissimilar physical characteristics. The chassis defines the physical embodiment of each platform, and real-world fleets span sub-tonne microcars to bus-class vehicles. Consequently, the driving stack must either be retrained per platform or adapt to the underlying chassis dynamics online. World model (WM)-based reinforcement learning offers a sample-efficient path toward end-to-end autonomous driving on egocentric bird's-eye-view (BEV) representations, but its effectiveness hinges on how faithfully the WM captures the ego vehicle's dynamics. This work identifies a structural bottleneck in BEV-based WMs: observation transitions entangle ego-motion with scene dynamics, consuming modeling capacity at the cost of imagination accuracy. This burden is embodiment-dependent: dissimilar chassis produce different observation warps under the same control input. The proposed DynaDreamer addresses this bottleneck by conditioning the WM's latent distributions on a physics-informed ego-dynamics context derived from a lateral dynamics model with a neural tire force formulation. This context is extracted online via a neural-ODE encoder-decoder that simultaneously identifies the underlying chassis parameters. Information-theoretic analysis confirms that this conditioning removes the ego-motion terms from both the WM's transition entropy and its prior-posterior KL divergence. The identified physical parameterization enables zero-shot cross-embodiment adaptation across a dynamically diverse fleet without per-platform retraining. Simulation results show 28% and 43% improvements in driving task success rates over the strongest baseline in urban and highway scenarios, and the advantage over the base Transformer WM reaches up to 73% when extrapolating to unseen chassis.
Jul 14, 2026

Adapting Generalist Vehicle Models for High-Speed MPC Across Terrains

High-speed off-road autonomy requires precise closed-loop control for a target vehicle while remaining robust across changing terrains. Recent forward kinodynamic (FKD) prediction foundation models suggest a promising path, starting from a generalist model and specializing it to the target platform. However, effective specialization remains challenging, as it often requires substantial real-world data, and models adapted to one setting can still overfit to specific terrains or driving regimes. We present OptCar (Optimized Car), a recipe for bridging the gap from generalist to specialist FKD models that preserves cross-terrain generalization while optimizing performance for a specific vehicle. OptCar introduces a transformer FKD architecture that uses FiLM to condition multi-step predictions on a single dynamics context token summarizing recent state-action history. It then specializes the generalist model using limited real-world data and targeted synthetic rollouts from environment-specific system identification. In closed-loop model predictive control (MPC) experiments across three terrains and an out-of-distribution cart-pulling task, the largest gains appear at 6 m/s, the highest speed evaluated and the regime in which slip dominates tracking error. On vegetation + dirt, the most slip-diverse terrain, OptCar reduces 6 m/s trajectory tracking error by roughly 55% relative to AnyCar fine-tuned on real data alone, and remains the most accurate even when an unseen cart payload changes the dynamics. With 5 minutes of real data per terrain, OptCar is competitive on road with a specialist trained on 30 minutes of road data and outperforms it when the terrain changes. Project Page : https://amrl.cs.utexas.edu/optcar/
Jul 14, 2026

Parsimonious disturbance-aware minimum-time planning with parametric uncertainty

This study presents and validates a minimum-lap-time planning (MLTP) framework for motorsport applications that embeds robustness against both state disturbances and parameter uncertainty. The methodology builds upon a prior disturbance-aware framework that, at each track point, propagates stochastic vehicle dynamics over a short horizon and tightens tyre-friction constraints based on the worst-case scenario at horizon end. We extend the formulation to account for uncertainty in key vehicle parameters: moment of inertia, centre-of-mass position, and aerodynamic drag coefficient. To keep the extended formulation computationally tractable, a spatially selective, parsimonious activation strategy confines the robust constraints to the circuit segments where they are most critical. We demonstrate the improved driveability of the robust references by employing a model predictive controller (MPC) as a virtual test driver. For each reference, the same MPC drives a simulated FSAE (Formula SAE) car over 1000 runs on a representative Barcelona-Catalunya sector, with randomly realised impulsive disturbances and parameter scatter. We compare a nominal reference, planned without robustness, against its robust counterparts. The latter yield consistently fewer failed runs and, at a moderate sector-time cost, show tighter dispersion of key signals (vehicle inputs, axle saturations) around the reference values, evidence of better trackability.
Jul 11, 2026

Diffusion-Residual Model Predictive Steering Control for Vehicle Stabilization at the Limit of Handling under Model Uncertainty

At the limit of handling, a stabilizing MPC depends on the yaw-rate reference it tracks and the stable-handling envelope it enforces, both operating-point-dependent and unknown a priori, so fixed or worst-case settings are either too conservative or unsafe. We learn this uncertainty with a conditional diffusion residual model and apply it to the controller's reference and constraints rather than its control law. Conditioned on the steering command, the model returns the residual's mean and a predictive spread: the mean re-sizes the tracked yaw reference, while the spread, propagated over the prediction horizon, tightens the stable-handling envelope through a one-sided chance back-off. Together these form the proposed diffusion-residual MPC (D-res), so caution is anticipated ahead of the tracking error rather than corrected after it by a high-gain loop. Because only two moments per command are needed, the generator is tabulated offline and the online controller adds a single table lookup to the baseline MPC, with no in-loop diffusion; it runs within the 100 Hz budget on an NVIDIA Jetson AGX Xavier (worst-case 4.08 ms per step). Across a 7-DOF model and high-fidelity CarMaker co-simulation spanning vehicle, tire, road, and maneuver diversity, D-res reduces peak side-slip where the fixed bicycle model is least accurate and restores directional stability on low-friction maneuvers, where the fixed reference over-commands the available grip.
Jul 3, 2026

Longitudinal-Motion-Aware Lateral Control for Autonomous Vehicles: A Robust Nonlinear Control Framework

As autonomous vehicles (AVs) operate in increasingly dynamic traffic conditions, lateral control must be performed while longitudinal speed and acceleration vary. Yet many existing lateral controllers rely on constant-speed or operating-point-based assumptions, which can degrade performance during transient longitudinal maneuvers. Moreover, most methods assume precisely known vehicle parameters, despite real-world parametric uncertainties. To address these limitations, this paper presents a longitudinal-motion-aware robust nonlinear lateral control framework for AVs. It first derives a tracking error model that depends on varying longitudinal speed and acceleration. Using this model, feedback linearization is employed to obtain a linear input-output relation for lateral error tracking while embedding longitudinal motion into the control law. The resulting internal dynamics are then analyzed to ensure overall system stability. To address parameter uncertainty, two robust control designs with distinct implementation trade-offs are proposed: (i) a Lyapunov redesign (LR) approach inspired by sliding mode control, and (ii) an incremental nonlinear dynamic inversion (INDI) method. Both are rigorously analyzed and proven to ensure ultimate boundedness, with key robustness-tuning parameters explicitly identified. Simulations demonstrate enhanced tracking accuracy, consistent performance across varying speeds and accelerations, and robustness to model uncertainties, while also examining the effects of the robustness-related parameters. Real-vehicle tests further confirm real-time implementation and practical path-tracking performance on actual hardware.
Jun 30, 2026

AD-MPCC: Adaptive Differentiable Model Predictive Contouring Control for Autonomous Racing

This paper presents Adaptive Differentiable Model Predictive Contouring Control (AD-MPCC), a framework for autonomous racing that integrates differentiable MPCC with online parameter estimation to handle varying road-surface conditions. For online parameter estimation, we leverage a parameterized Pacejka Magic Formula together with a regularized moving-horizon estimation scheme with exponentially decaying weights to capture road interactions and update parameters in real time. Furthermore, we propose a differentiable MPCC (Diff-MPCC) framework that enables optimal adjustment of objective weights based on predefined long-horizon performance costs. To implement Diff-MPCC for online objective weight adaptation, we propose a Pacejka-informed machine learning model that is trained in a supervised manner using data generated by Diff-MPCC to tune the objective weights. Simulation results demonstrate that AD-MPCC reliably ensures safety and achieves faster lap times compared to baseline controllers in both single-surface and multiple-surface scenarios.
Jun 26, 2026

Drifting in the Future: Stabilizing Path Following Drifting on High-Latency Vehicle Systems

Autonomously controlling and handling a vehicle at and beyond its stability limit is a mathematically and computationally demanding task. Prior demonstrations of automated drifting have been limited to research platforms with instantaneous torque delivery and independently actuated wheels, leaving their applicability to production vehicles with actuator latencies and mechanically coupled axles uncertain. To overcome these issues, we design a predictor to compensate for powertrain delays, develop a revised control formulation to accommodate higher actuation latencies as well as a differential coupling on the driven axle, and introduce brake-based velocity stabilization. This paper presents the controller framework, the model extensions, and real-world experimental results. We observe that our controller enables a production sports car with a combustion engine to robustly sustain circular and figure-eight drifts, limiting lateral error to 1.1 m and sideslip overshoot to 0.06 rad despite actuator delays exceeding 250 ms, while mitigating oscillations and maintaining stable path and sideslip tracking. In conclusion, our results establish that autonomous drifting is feasible on production-ready vehicles, opening pathways to advanced safety systems capable of stabilizing cars in scenarios where traditional control fails.
Jun 24, 2026

Racing a Wheeled Quadruped: Active Load Transfer Mitigation via Model Predictive Control

This paper presents a hierarchical control framework using model predictive control (MPC) and reinforcement learning (RL) for active roll control to manage lateral load transfer during autonomous racing of a wheeled quadruped. The framework integrates offline time-optimal raceline generation, an online MPC planner that actively minimizes the lateral Load Transfer Ratio (LTR), and a low-level, whole-body RL policy deployed directly onto the robot's 16 actuators. The MPC is based on a vehicle dynamics bicycle model of the Unitree Go2-W platform. The robot's leg actuators act as active suspension where knee joints generate anti-roll torque to bank into turns. Physical track experiments demonstrate that active roll control reduces mean LTR by up to 44%, improves the fastest lap time by 8.7%, and boosts peak lateral acceleration capability by 21.3% to 1.98 m/s2m/s^2, maintaining robust high-speed stability beyond the range of a non-tilting baseline controller. Supplementary code and video can be found at https://github.com/meisman-ucb/go2w-roll-control-mpc
Jun 12, 2026

Short-Horizon Position Accuracy of Single-Track Models: Implications for Motion Planning of Autonomous Vehicles

Accurate and computationally efficient vehicle models are essential for motion planning of autonomous vehicles, where positional accuracy directly affects trajectory feasibility and safety. However, the positional accuracy has not been systematically evaluated against real measurements. Therefore, this paper compares the short-horizon positional accuracy of three single-track vehicle models against vehicle measurements across various driving maneuvers. Model parameters are identified through dedicated experiments with the instrumented test vehicle. Rather than identifying a single best model, this work aims to provide insight into the trade-offs between model complexity, parameterization quality, and positional accuracy for informed model selection in Model Predictive Control applications.
Jun 9, 2026

Vehicle Prediction Model for Enhanced MPC Path Tracking in Formula Student Driverless

Autonomous race cars, such as in Formula Student Driverless, operate close to their physical handling limits. The resulting highly nonlinear vehicle behavior increases the path tracking complexity, especially on narrow tracks. Model Predictive Control (MPC) is commonly used to address this issue, a method whose performance is closely tied to the accuracy of the underlying prediction model. This paper presents a novel, real-time capable prediction model for autonomous race cars that adjusts to changing conditions by combining information from past runs and the current driving situation. Our model is divided into three consecutive submodels: a nominal Kinematic Bicycle Model, an offline Bayesian Linear Regression (BLR) model, and an online Sparse Gaussian Process Regression (SGPR) model. The proposed approach enables efficient integration of all available data without significantly increasing computational cost, ensuring high prediction accuracy and a quantitative uncertainty assessment right from the start of the run. Compared to existing approaches, an improvement in prediction accuracy of up to 57% was achieved. Further, we successfully demonstrated the practical applicability of the model within an MPC-based path tracking controller on a real Formula Student race car.
Jun 9, 2026

Pushing the Performance Limits in Autonomous Racing: Continuous Stability-Aware Adaptive Velocity Planning in Formula Student Driverless

In autonomous racing, especially in competitions such as Formula Student Driverless, precise planning of the target velocity of a race car is crucial for competitive lap times and stable driving behavior. Especially at high speeds, Velocity Planning (VP) is a significant challenge as it has to be performed in real time, taking into account track layouts, environmental influences, mechanical tolerances, and the resulting control inaccuracies. In this paper, we present a novel approach to VP that dynamically adapts to such changing conditions. Instead of estimating the physical Tire-Road Friction Coefficient (TRFC), a continuous scaling factor is inferred indirectly from vehicle stability. This factor not only reflects the effective tire-road interaction but also captures effects of control inaccuracies. From this, we generate a continuous friction map, which serves as a robust, adaptive basis for computing the optimal target speed, accounting for both vehicle and environmental limits. Our proposed approach was evaluated on a real Formula Student race car, showing a lap time improvement of 35 % over ten laps and an average increase of 8 % compared to a non-adaptive approach.
Jun 5, 2026

Learning All-Terrain Locomotion for a Planetary Rover with Actively Articulated Suspension

This paper presents ERNEST, a four-wheeled planetary rover concept equipped with a two-degree-of-freedom Active Gimbal Suspension that combines yaw and roll actuation to enable wheel reconfiguration, steering, and active load redistribution. A single neural network controller, trained to track a desired path across challenging terrain, fully unlocks the capabilities of this actuated suspension system for autonomous obstacle negotiation. A reinforcement learning framework is developed using the high-fidelity DARTS simulation engine, which combines rigid-contact dynamics and Bekker-Wong terramechanics, enabling the emergence of locomotion strategies adapted to loose-soil conditions. To obtain a single unified controller across heterogeneous terrains, a policy consolidation strategy merges the experience of terrain-specialized agents into one neural network, eliminating the need for explicit terrain classification and controller switching. The resulting controller operates on a combination of proprioceptive and exteroceptive feedback, including sparse stereo-derived terrain elevation, chassis attitude, joint states, and force-torque measurements. Zero-shot transfer to the physical rover is achieved through domain randomization, sensor noise injection, and model-to-real system identification. Experimental results demonstrate autonomous traversal of rock fields, a Bickler trap (bump obstacle), a wheel-high step, sand ripples, and sandy slopes. On a 20° sandy slope, the learned controller reduces the cost of transport by 37% on dry sand despite the additional actuation, and achieves superior performance on wet sand where the passive suspension becomes completely immobilized. A video accompanying this paper is available at https://youtu.be/d684P5a3xMc
Jun 1, 2026

Binary Road Surface Classification Using Machine Learning on Production Vehicle Signals During Cruising

Knowledge of real-time road slipperiness, or even better, a refined estimate of peak grip potential, is a critical input for vehicle warning and intervention control systems. Typically, friction is estimated through dynamics-based recursive estimators by calculating the slip slope; however, its efficacy is heavily constrained by the vehicle dynamic scenario. When the vehicle is cruising and there is little to no slip, these methods become ineffective due to the inability of present-day production-grade sensors, such as wheel speed sensors, and methods to either measure or accurately estimate micro slip, which is crucial for distinguishing different surfaces. To address this challenge, the correlation between vehicle signals and road surface condition during cruising needs to be uncovered using machine learning. In this paper, a feature-based framework and an end-to-end data-driven framework are used to correlate the statistics of vehicle dynamics behavior with the condition of the road surface and perform binary classification into grip, dry or damp, and slip, snow or ice, conditions. A sliding-window approach is adopted to batch a short buffered window of wheel speeds, wheel torques, longitudinal acceleration, steering angle, and yaw rate, which are fed into a machine learning module for predicting the road state. Validation results on public-road data show scenarios where the data-driven method identifies the road surface correctly even during cruising, showing promise for accurate data-driven friction-related state estimators in the field of tire and vehicle dynamics.
May 20, 2026

A Terrain-Adaptive epsilon-Constraint MPC for Uneven Terrain Kinodynamic Planning

Kinodynamic planning for car-like vehicles on uneven terrain requires simultaneously optimizing competing objectives such as path efficiency and pose stability. This work presents an adaptive epsilon-constraint method integrated into a Model Predictive Control (MPC) framework, where the epsilon bounds are dynamically adjusted based on terrain descriptors to explore the Pareto front in real time. To capture vehicle-terrain dynamics, we develop a semi-parametric model combining analytical vehicle dynamics with a Sparse Gaussian Process (SGP) trained on the same terrain descriptors. The proposed epsilon-MPC is evaluated against MPPI and GAKD baselines, achieving a 94% navigation success rate while reducing maximum orientation deviation by 24% and improving multi-objective trade-off quality by 23%.