Underwater Image Enhancement

Surface-level marine debris remains a practical bottleneck for autonomous clean-up, where small, reflective targets (e.g., aluminum cans) must be detected at distance under glare, ripples, and partial submersion. This paper presents, an ASV vision system and a new surface-can dataset. The dataset comprises ~7.3k raw images extracted from videos and annotated with bounding boxes, expanded via ten augmentation types to ~57k training/validation images spanning diverse lighting and water states. A family of detector and detector-tracker pipelines tailored to surface operations were benchmarked. Training YOLOv11 on CANSURF boosts performance 12x over generic datasets, highlighting the dataset's value. Experiments show that YOLOv11+ByteTrack yields the most stable tracks (fewer identity switches) and stronger multi-object accuracy under, while YOLOv11+SAHI increases recall on far-field cans at the cost of lower precision in full-context inputs. Given the mission profile, single-can pickup with approach and grab, YOLOv11 + SAHI proves better for detecting the maximum number of cans. No prior open dataset targets aluminum cans on water from a surface-level viewpoint; this dataset fills this gap and supports reproducible evaluation.

Underwater salient object detection (USOD) has attracted increasing attention for underwater visual scene understanding and vision-guided robotic applications. However, existing USOD methods still struggle with underwater image degradations, which often lead to inaccurate object localization, fragmented salient regions, and coarse boundary prediction. To address these challenges, this paper proposes DSS-USOD, a novel RGB-based USOD method built upon dynamic structural specialization. DSS-USOD extracts a shared base representation from a single underwater image, decomposes it into boundary-sensitive and region-coherent structural features, and dynamically coordinates their contributions according to local structural context. Specifically, the extracted shared base representation is decomposed into a boundary-sensitive branch for modeling fine-grained boundary details and a region-coherent branch for capturing region-level structural consistency. A spatial coordination module is then introduced to adaptively regulate the relative contributions of the two branches according to local structural context. Moreover, cooperative structural supervision is introduced to promote branch specialization and stabilize spatial coordination, enabling DSS-USOD to better balance boundary precision and region coherence under degraded underwater conditions. Extensive experiments show that DSS-USOD achieves superior performance on benchmark datasets. Finally, real-world deployment on an underwater robot validates the practical effectiveness of DSS-USOD for underwater object inspection.

Autonomous underwater vehicle (AUV) swarms are emerging as intelligent underwater networks, where each node must sense, communicate, process local data, and make decisions under severe acoustic constraints. Persistent underwater target tracking is a typical task with moving targets, changing communication topology, intermittent acoustic links, and limited observation for each AUV. Multi-agent reinforcement learning (MARL) is a natural candidate for distributed tracking, yet existing studies still lack a unified open-source platform for evaluating different MARL algorithms under six-degree-of-freedom AUV dynamics. In addition, policies trained with raw geometric states and low-level force actions often struggle to represent task phases, observation reliability, link quality, and local cooperation roles. This paper addresses these issues by developing an open-source MARL-AUV platform that integrates DI-engine with a six-degree-of-freedom underwater AUV target-tracking simulator. To the best of our knowledge, it is the first open platform that connects a public MARL training framework with physically modeled AUV swarm-based tasks, and provides a unified experimental protocol for fair training, testing, and comparison of representative RL and MARL algorithms. Based on this platform, we propose STG-MAPPO, a Semantic Task Graph-enhanced variant of Multi-Agent Proximal Policy Optimization. STG-MAPPO builds semantic policy inputs from tracking diagnostics, task phases, observation confidence, link availability, neighbor tracking quality, and local role advantage. A compact semantic task graph links communication-constrained network states to decentralized actor decisions, and a velocity-level action abstraction maps high-level cooperative decisions to executable six-degree-offreedom AUV control inputs.The code is available at https://github.com/dasjsaj/MARL-AUV.

This paper addresses the problem of reconstructing missing or dropped frames in top-down drone video of autonomous surface vehicles performing structured maritime manoeuvres. We propose a pipeline that converts raw GPS telemetry and a single reference frame into a trajectory-guided video sequence using a pre-trained image-to-video diffusion model, requiring no domain-specific fine-tuning. GPS coordinates from onboard telemetry logs are projected into image space via an equirectangular mapping, producing per-vessel motion cues that condition the SG-I2V diffusion model. The generated frames are evaluated against ground-truth video using perceptual, temporal and trajectory-based metrics, and benchmarked against optical flow extrapolation and RIFE interpolation baselines. SG-I2V produces the most naturally appearing frames among all methods (BRISQUE 25.52, closest to ground-truth 23.64), the most realistic motion magnitude (temporal smoothness 1.14 vs. ground truth 1.42), and the strongest GPS trajectory adherence (9.31px vs. 28.70px for ground-truth, the latter reflecting approximate temporal alignment between footage and GPS logs rather than generation error), demonstrating that trajectory-guided diffusion synthesis is a viable approach to maritime video reconstruction under challenging low-texture, small-object conditions.

High-resolution seafloor mapping necessitates stable and precise positioning for underwater robots. This paper introduces a novel mathematical model for SeaVis remotely operated towed vehicles (ROTVs) and develops a gain-scheduled linear-quadratic regulator (LQR) for robust depth and attitude control. We validate the approach in a high-fidelity simulation, benchmarking the LQR against a conventional PID controller over a challenging seabed profile. The presented results demonstrate the LQR's superior performance, with significantly enhanced robustness to disturbances, greater control efficiency, and substantially reduced flap actuation. The gain scheduling also confirms the controller's effectiveness across the full operational velocity range. The complete simulation environment and controller are open-sourced.

With the rapid evolution of computer vision, vision-based methodologies for water level and river surface velocity estimation have reached significant maturity. Compared to traditional sensing, these techniques offer superior interpretability, automated data archiving, and enhanced system robustness. However, challenges such as environmental sensitivity, limited precision, and complex site calibration persist. This work proposes an integrated framework that synergizes state-of-the-art (SOTA) vision models with statistical modeling. By leveraging physical priors and robust filtering strategies, we improve the accuracy of water level detection and flow estimation. Code will be available at https://github.com/sunzx97/Vision_Based_Water_Level_and_Flow_Estimation.git

Autonomous robotic exploration in remote and extreme environments allows scientists to model complex transport phenomena and collective behaviors described by continuously deforming flow fields. Although these environments are naturally modeled as time-varying domains, most adaptive exploration methods assume static environments and fail to provide adequate coverage or satisfy any formal guarantees. This is especially the case in oceanography where autonomous underwater systems (UxS) have highly restrictive compute and payload requirements that necessitate path planning methods that yield robust data collection strategies in open-loop and underactuated settings. In this work, to address the aforementioned issues, we propose to formulate adaptive search as an ergodic coverage problem and investigate certifying coverage in the ergodic sense over evolving domains with flow-induced dynamics. We expand upon recent work demonstrating maximum mean discrepancy (MMD) as a functional ergodic metric, and derive a flow-adaptive formulation that explicitly accounts for domain evolution within the coverage objective. We show that this approach preserves ergodic coverage guarantees in ambient flows and enables effective exploration in under-actuated, and even open-loop planning settings by integrating environment dynamics. Experiments validate that our method generalizes to diverse spatiotemporal processes including ocean exploration, and tracking human and cattle movement. Physical experiments on aerial and legged robotic platforms validate our ability to obtain ergodic coverage in non-convex, flow-restricted environments while respecting robot dynamics.

This paper introduces a novel automatic coverage path planning algorithm for bathymetry surveying with unmanned surface vehicles. The detection range of the mapping sensor employed - a multibeam echo sounder - is heavily influenced by local seafloor depths. Hence, a path designed to uniformly cover the sea surface does not guarantee uniform coverage of the seafloor. Yet this is currently the typical process for bathymetric surveys, with the simplistic boustrophedon scheme along manually selected waypoints at constant depths being the most widespread planner used. The proposed scheme incorporates coarse prior depth information to pre-process the target region and adaptively guide path generation and sensing range configuration. By explicitly accounting for depth variations, the proposed algorithm designs a coverage path with optimised spacing between survey passes that adjusts the sensing beam aperture to achieve more consistent seafloor coverage. The proposed method is shown to offer significant improvements in both synthetic and real-world scenarios. Validations in challenging synthetic terrains achieves coverage ratios beyond 99%, a marked improvement when compared with traditional boustrophedon paths revealing a maximum 75% coverage. The same trend appears in realistic simulations using real bathymetric data from a coastal harbour, with coverage reaching over 92%, and significantly surpassing boustrophedon sweeps with coverage rates below 65%. Beyond improved performance, the scheme also brings a fully automated design, suitable for autonomous marine vehicles, thus offering practical utilities for real-world applications.

Extreme ocean phenomena are challenging not only to predict but to diagnose, as accurate forecasts alone do not reveal the underlying physical drivers. While recent machine learning approaches achieve strong predictive skill, they remain largely opaque and provide limited guarantees of fidelity to ground-truth physics. We introduce OceanCBM, the first concept bottleneck model (CBM) for spatiotemporal prediction and mechanistic interrogation of ocean dynamics. OceanCBM uses mixed supervision to predict mixed layer heat content, a key precursor of marine heatwaves, while routing information through an intermediate layer of prescribed concepts derived from geophysical fluid dynamics and a 'free' concept. This design imposes soft physical structure without over-constraining the model, and the free concept both regularizes concept predictions and captures residual physical processes. Across ensemble initializations, we show that mixed supervision yields consistent mechanistic representations, whereas prediction-only and prescription-only baselines learn highly variable latent structures despite similar predictive performance. OceanCBM achieves interpretable, physically grounded representations without sacrificing skill, explicitly characterizing the interpretability-performance trade-off.

Dimensionality reduction is essential in simulation-based shape design, where high-dimensional parameterizations hinder optimization, surrogate modeling, and systematic design-space exploration. Parametric Model Embedding (PME) addresses this issue by constructing reduced variables from geometric information while preserving an explicit backmapping to the original design parameters. However, PME is intrinsically linear and may become inefficient when the sampled design space is governed by nonlinear geometric variability. This paper introduces a nonlinear extension of PME, denoted NLPME. The proposed framework preserves the defining principle of PME -- geometry-driven latent variables and parameter-mediated reconstruction -- while replacing the linear reduced subspace with a nonlinear latent representation. Geometry is not reconstructed directly from the latent variables; instead, the latent representation is decoded into admissible design parameters, and the corresponding geometry is recovered through a forward parametric map. The method is assessed on a bio-inspired autonomous underwater glider with a 32-dimensional parametric shape description and a CAD-based geometry-generation process. NLPME reaches a 5% reconstruction-error threshold with $N=5$ latent variables, compared with $N=8$ for linear PME, and a 1% threshold with $N=9$, compared with $N=15$ for PME. Comparison with a deep autoencoder shows that most of the nonlinear compression gain can be retained while preserving an explicit backmapping to the original design variables. The results establish NLPME as a compact, admissible, and engineering-compatible nonlinear reduced representation for parametric shape design spaces.

Accurate measurement of island area and coastline length is crucial for coastal zone monitoring and oceanographic analysis. However, traditional measurement and mapping methods usually rely heavily on orthophotos, expensive airborne depth sensors, or dense ground control points, which face serious limitations of high labor costs, time-consuming efforts, and low operational efficiency in vast and inaccessible open sea environments. To overcome these challenges and break away from the reliance on manual field exploration, this paper proposes a geometrically consistent, real-scale island measurement framework based on pure monocular vision. This project significantly reduces the mapping cost through a fully automated process and achieves high-efficiency measurement without prior GIS data. In our system pipeline, only the geographical coordinates or names of the target area need to be input to obtain a low-altitude surrounding image sequence. After obtaining the point clouds, a lightweight trajectory alignment algorithm (Umeyama) is used to restore the global physical scale, and the scaled model is orthorectified, enabling high-precision area and perimeter extraction directly on the 2D rasterized plane. We have fully verified this pipeline on four islands with different terrain features (covering natural landform islands and islands with complex artificial facilities). The experimental results show that the final measurement error of the system is stable at around 10%, demonstrating excellent accuracy and robustness. Moreover, this framework has outstanding inference speed, requiring only 70 ms to process a single high-resolution image and generate point clouds, providing a highly practical new paradigm for large-scale marine and coastline

What happens when the strongest alliance member pressures a weaker member over territory and strategic control? We examine the Greenland sovereignty crisis as a stress test for LLM geopolitics, centered on the 2019-2026 U.S. push to acquire Greenland from the Kingdom of Denmark. The crisis nests two collective-action problems: Arctic strategic control and whether NATO can enforce alliance norms against the dominant member. We develop three games (asymmetric coercion; a NATO assurance game with a critical-mass tipping point; a triadic extensive-form game with social preferences) and test them with a multi-agent simulation in which eight frontier LLMs play six geopolitical roles (United States, Denmark, Greenland, NATO, Russia, Canada) across 3,604 completed games and 108,120 action observations. Using inverse game theory, we recover each model's structural utility parameters (alpha, beta, gamma, delta, eta) for material self-interest, reciprocity, inequality aversion, norm respect, and commitment consistency. Three findings stand out. First, all eight models become more escalatory under coercion framing (four-action escalation rises from 10.7% to 28.6%). Second, Chinese-origin models show systematically different power-weight profiles from Western-origin models when playing the U.S. role. Third, peaceful US acquisition emerges in only 1.9% of clean games and only 3 of 8 frontier models ever achieve it, most prominently DeepSeek V3.2, which executes a stable five-round playbook through the metropole. Prompts emphasizing jus cogens and self-determination reduce escalation back near baseline in the English-only confirmatory sample; multilingual contrasts are reported as exploratory sensitivity checks. We position this as a structural benchmark for LLM geopolitical behavior, complementing action-frequency benchmarks.

Self-supervised learning (SSL) has emerged as a promising approach to seismic data denoising as it does not require clean reference data. In this work, the deployment of the Noisy-as-Clean (NaC) method was evaluated for real seismic data denoising under controlled conditions. Two independent seismic acquisitions, each comprising noisy and filtered data, were organized into four real datasets. The NaC SSL method was adapted to add real noise to the noisy input, controlled by a parameter. An experimental protocol with ten experiments was designed to compare different strategies for deploying the NaC SSL method with the supervised learning baseline, using identical network topology and hyperparameters. The models were evaluated in terms of denoising performance, computational cost, and generalization capability. The results show that the synthetic additive white Gaussian noise (AWGN) is inadequate for the denoising of seismic data within the NaC method, and performance strongly depends on the compatibility between the injected and actual noise characteristics. Furthermore, both the characteristics of the seismic data and the noise level influence the performance of the model. Self-supervised fine-tuning on test data has improved SSL performance, whereas no such gain was observed for fine-tuning of supervised models. Finally, NaC has shown to be a simple, effective, and model-independent method that offers a feasible solution for the denoising of real seismic data.

Short-term ocean forecast skill depends strongly on the three-dimensional ocean structure of the upper ocean, which governs stratification, subsurface heat storage, and the response of the ocean to atmospheric forcing. However, AI ocean forecasting models often fail to preserve this vertical structure, resulting in over-smoothed subsurface features and weak physical consistency under strong forcing. Here, we present AxiomOcean, a global AI ocean forecasting model that explicitly represents vertical hierarchy and cross-layer dependence within the water column. By combining a fully three-dimensional encoder-backbone-decoder architecture with surface atmospheric forcing, AxiomOcean jointly predicts upper-ocean temperature, salinity, and three-dimensional currents at global 1/12° resolution down to 643 m depth. In 10-day forecasts, AxiomOcean outperforms an advanced AI comparison model across variables and lead times, reducing day-1 RMSE by approximately 20 to 35% while maintaining higher anomaly correlation. The gain is not achieved through excessive smoothing: AxiomOcean better preserves eddy kinetic energy, temperature and salinity variance. Its advantage also extends through the water column and remains evident across the equatorial Pacific, Kuroshio Extension, and Southern Ocean, yielding a more realistic reconstruction of upper-ocean heat content. These results show that explicitly preserving upper-ocean three-dimensional structure can improve both forecast accuracy and physical fidelity in AI ocean prediction.

Quantifying fish community structure is essential for understanding biodiversity and ecosystem responses in a changing environment, yet existing survey methods provide limited high-frequency, quantitative observations. Conventional approaches, including catch-based methods, underwater visual censuses, and environmental DNA metabarcoding, either require intensive labor or lack reliable estimates of abundance and biomass. Here, we develop an automated framework for quantifying fish communities from underwater video using computer vision. Using videos acquired with a custom-made stereo camera system, the framework integrates deep learning-based fish identification, multi-object tracking, and 3D reconstruction to estimate species-level abundance and biomass. We applied the approach to a reef fish community over a 20-day period with hourly daytime observations, revealing dynamic fluctuations in species richness, abundance, and biomass associated with changes in species composition. By comparing fish communities estimated from visual census and environmental DNA surveys, we demonstrate that our method provides complementary strengths for continuous, non-invasive, and quantitative monitoring of consistently observed species. This approach provides a scalable foundation for long-term monitoring and advances the capacity to resolve fine-scale temporal dynamics in fish communities.

Underwater images captured by Autonomous Underwater Vehicles (AUVs) are inevitably affected by artificial light sources, which often produce halos in the foreground of the camera and seriously interfere with the quality of the image. The existing underwater image enhancement methods fail to fully consider this key problem, and the robustness of processing images under artificial light scenes is poor. In practical applications, since underwater image enhancement itself is a very challenging task, the influence of artificial light sources will lead to serious degradation of image performance and affect subsequent vision tasks. In order to effectively deal with this problem, this paper designs a single halo image correction method based on an iterative structure. The network is mainly divided into two sub-networks, one is the halo layer separation sub-network which aims to separate the halo by gradient minimization, and the other is the multi-scale recovery sub-network which aims to recover the image information masked by halo. The UIEB and EUVP synthetic datasets are used for training to ensure that the network can fully learn the characteristics and laws of underwater halo images. Then a large number of halo images taken in an underwater environment with real artificial light are collected for testing. In addition, the brightness distribution characteristics of underwater halo images are analyzed and the radial gradient is introduced to constraint eliminate halo to improve the effect of underwater image restoration.

Maritime object detection is critical for the safe navigation of unmanned surface vessels (USVs), requiring accurate recognition of obstacles from small buoys to large vessels. Real-time detection is challenging due to long distances, small object sizes, large-scale variations, edge computing limitations, and the high memory demands of high-resolution imagery. Existing solutions, such as downsampling or image splitting, often reduce accuracy or require additional processing, while memory-efficient models typically handle only limited resolutions. To overcome these limitations, we leverage Vision Mamba (ViM) backbones, which build on State Space Models (SSMs) to capture long-range dependencies while scaling linearly with sequence length. Images are tokenized into sequences for efficient high-resolution processing. For further computational efficiency, we design a tailored Feature Pyramid Network with successive downsampling and SSM layers, as well as token pruning to reduce unnecessary computation on background regions. Compared to state-of-the-art methods like RT-DETR with ResNet50 backbone, our approach achieves a better balance between performance and computational efficiency in maritime object detection.

Multi-robot simultaneous localization and mapping (SLAM) is a fundamental task in multi-robot operations. Robots must have a common understanding of their location and that of their team members to complete coordinated actions. However, multi-robot SLAM between Uncrewed Surface Vessels (USVs) and Autonomous Underwater Vehicles (AUVs) has primarily been achieved through acoustic pinging between robots to retrieve range measurements; a measurement technique requires that robots to be in similar locations simultaneously, have an uninterrupted path for signal propagation, and may necessitate synchronized clocks. This is especially challenging in complex, cluttered maritime environments, where structures may impede signals. However, these same structures may be observable above and below the water's surface, presenting an opportunity for inter-robot SLAM loop closure between USV and AUV data streams. This work builds upon recent research on inter-robot SLAM loop closure between USV and AUV data, extending it to propose a centralized multi-robot SLAM system. Each robot performs its state estimation, and we detect loop closures between each AUV and the USV data. These inter-robot loop closures are used to merge each robot's state estimate into a centralized graph, yielding estimates for the whole time history of the USV and all AUVs in the system. Validation is performed using real-world perceptual data in three different environments. Results show improved errors for AUVs in the multi-robot SLAM system compared to single-robot SLAM over the same trajectories. To our knowledge, this is the first instance of a multi-robot SLAM system with AUVs and USVs built on loop closures rather than acoustic distance measurements.

Unmanned underwater vehicles (UUVs) operate persistently in communication-constrained environments, thus requiring high-level autonomous fault-tolerant control under faulty operating conditions. Existing approaches rely heavily on predefined hard-coded rules and struggle to achieve effective fault-tolerant control against unforeseen faults. Although large language models (LLMs) possess powerful cognitive and reasoning capabilities, their inherent hallucinations remain a major obstacle to their application in UUV control systems. This paper proposes an intelligent control method based on the LASSA (LLM-based Agent with Solver, Sensor and Actuator) architecture. Within this architecture, an LLM identifies unknown faults and accomplishes task replanning via autonomous reasoning without hard-coded rules; the intelligent agent undertakes perception, scheduling and decision evaluation; the solver verifies physical boundary feasibility constraints prior to command transmission to the actuators. This architecture suppresses physically infeasible LLM hallucinations and ensures interpretable, verifiable decision-making. Moreover, it enables fast-slow dual closed-loop collaborative control, where the slow loop undertakes high-level dynamic decision-making and the fast loop guarantees high-frequency real-time control, simultaneously balancing decision intelligence and control timeliness. Lake experiments under normal and lower-rudder-fault conditions show that the framework detects trajectory tracking abnormalities, replans the route by adjusting the turning radius from 4m to 12m and reducing speed from 2kn to 1kn, passes all three solver constraints on the first invocation, and guides the UUV to complete the full mission; under normal conditions no false fault alarms are raised throughout the run.

A Remotely Operated Vehicle (ROV) is a tethered underwater robot used for tasks like inspection and intervention. While essential tools for underwater science, the high cost of commercial ROVs and a persistent gap between mechanically capable platforms and those with integrated intelligence create a significant barrier to access. HyDRA Scorpion differs from conventional systems by addressing these challenges, integrating an advanced, AI-driven perception stack with in-situ measurement capabilities onto a low-cost, locally manufacturable platform. The system combines 4-DoF maneuverability, dual manipulators, and a custom pressure-tested housing. Experimental results validate the system's robustness and performance. Leak-free operation was confirmed through prolonged pressure testing of the electronics housing to 4 bar, equivalent to the pressure of a 304.8-meter water depth approximately in a simulated environment, with no moisture ingress detected. The vehicle also demonstrated stable station-keeping, maintaining its position within a tight tolerance of $$\pm$0.15$ meters under external disturbances. The onboard AI module achieved underwater object detection mean Average Precision (mAP) of 0.89 with real-time inference, length and 3D-mapping based distance measurement. Also, 4-DoF manipulator arm can grip and maintain dual-function manipulator feature which support 360 degree tangle-free rotation.

Post-disaster situational awareness relies heavily on understanding both the extent and the volume of floodwaters. While 2D semantic segmentation provides accurate flood masking, it lacks the vertical dimension required to assess navigability and structural risk. This paper presents a geometric "Water Surface Elevation" approach for estimating flood depth from monocular aerial imagery. Our pipeline utilizes Mask2Former, a state-of-the-art transformer-based segmentation model, to generate precise 2D flood masks. These masks are fused with Digital Elevation Models (DEMs) to identify the water-land boundary, calculate a global water surface elevation ($Z_{water}$), and compute per-pixel depth based on the principle of local hydrostatic equilibrium. We evaluate this workflow using the FloodNet and CRASAR-U-DROIDS datasets, demonstrating how high-performance segmentation can be leveraged to extract 3D volumetric data from 2D imagery without the latency of hydrodynamic simulations.

Underwater image enhancement (UIE) is a practically important yet underexplored application of spiking neural networks (SNNs), where the dominant degradations are large-scale and low-frequency, such as wavelength-dependent colour casts and scattering-induced veiling. Existing SNN restoration designs rely on locally bounded spiking perception, which can limit global correction and lead to saturated or inconsistent representations. To address these challenges, we propose a scale-aware SNN framework for UIE named UIESNN. At its core is a Multi-scale Pooling LIF Block (MPLB) that injects hierarchical multi-scale pooling responses into membrane dynamics, thereby enlarging the effective receptive field while preserving fine-grained details and inducing heterogeneous scale-dependent activations. Building on MPLB, we design a spiking residual architecture that integrates frequency decomposition and attention-based refinement in a fully spike-driven pipeline. Extensive experiments on the EUVP and LSUI benchmarks demonstrate that UIESNN achieves state-of-the-art performance among SNN-based methods, delivering improved colour fidelity and spatial coherence with competitive energy cost.

Underwater environments impose severe constraints on conventional imaging systems and demand solutions that balance high-quality sensing with strict resource efficiency. While emerging event cameras offer a promising alternative, their potential in aquatic scenarios remains largely unexplored. Through the lens of neuromorphic vision, this work pioneers the investigation of motion fields that serve as key media for agile underwater perception. Built upon spiking neural networks, we introduce a self-supervised framework to estimate per-pixel optical flow from asynchronous event streams, elegantly bypassing the long-standing bottleneck of underwater data scarcity. Extensive evaluations demonstrate that our method achieves competitive visual and quantitative results against leading techniques while operating with superior computational efficiency. By bridging neuromorphic sensing and aquatic intelligence, this work opens new frontiers for lightweight, real-time, and low-cost perception on resource-constrained underwater edge platforms.

Marine debris detection for ocean robot is crucial for ecological protection, yet performance is often degraded by low-quality images with blur, complex backgrounds, and small targets. To address these challenges, we propose YOLO-MD, an enhanced YOLO-based detection framework. A Dual-Branch Convolutional Enhanced Self-Attention (DB-CASA) module is designed to strengthen spatial-channel interactions, improving feature representation in degraded images. Additionally, a lightweight shift-based operation is introduced to enhance fine-grained feature extraction for objects of varying scales while maintaining parameter efficiency. We further propose SFG-Loss to mitigate class imbalance and optimization instability via dynamic sample reweighting. Experiments on the UODM dataset demonstrate that YOLO-MD achieves 0.875 precision, 0.822 F1-score, and 0.849 mAP50, outperforming the latest state-of-the-art methods. The effectiveness of this method has also been verified through real-world robotic edge deployment experiments.

The decline of global shellfish biodiversity poses a severe threat to coastal ecosystems. Although artificial intelligence (AI) technologies show potential for automated ecological monitoring, existing marine benthic datasets often lack adaptation to the complexities of real underwater environments (e.g., variable lighting conditions and diverse species postures), posing challenges for the robust generalization of vision models in practical ecological monitoring. To address this problem, we construct ShellfishNet, a comprehensive image benchmark dataset designed specifically for real-world ecological monitoring constraints. Comprising 8,691 images across 32 taxa, this dataset includes a curated subset annotated with descriptive captions. It is constructed through field photography and web scraping, encompassing samples from complex real-world environments. Based on this benchmark, we systematically evaluate 80 representative neural network models, including Convolutional Neural Networks (CNNs), Vision Transformers (ViTs), State Space Models (SSMs), and Self-Supervised Learning (SSL) methods. Furthermore, we evaluate the performance of fine-grained visual categorization (FGVC) models and investigate the image captioning capabilities of several mainstream multimodal large language models (MLLMs). Meanwhile, we introduce image corruption benchmark tests to simulate common underwater degradation scenarios (turbidity, severe weather) and assess the robustness of vision models, enabling trustworthy decisions on ecological protection in the wild. ShellfishNet is dedicated to providing a data foundation and a model-evaluation benchmark for the intelligent monitoring of benthic organisms.

Underwater salient object detection (USOD) plays a vital role in marine vision tasks but remains fundamentally challenging due to severe visual degradation, such as selective absorption and medium scattering. Conventional pipelines typically adopt a sequential "enhance-then-detect" paradigm. However, isolating low-level visual restoration from high-level semantic perception often leads to semantic inconsistency, where the restored images may not be optimal for detection and can even introduce task-irrelevant noise. To break this sequential bottleneck, we propose UniV2D, a Unified Vision-to-Detection Network that jointly optimizes visual restoration and salient object detection within a mutually beneficial framework. Unlike traditional methods that rely on disjointed pipelines or rigid physical priors, UniV2D introduces a semantic-driven learning paradigm: high-level saliency semantics actively guide the restoration process, while the restored visual cues reciprocally enhance saliency perception. Specifically, UniV2D features a hierarchical dual-branch architecture. It first employs a self-calibrated decoder to predict initial saliency masks alongside a mask-aware restoration module to reconstruct image content. Subsequently, a saliency-guided refinement module equipped with cross-level modulation is utilized to align structural fidelity with semantic consistency. Extensive experiments across multiple benchmarks demonstrate that UniV2D significantly outperforms state-of-the-art methods in both quantitative and qualitative evaluations, establishing a new standard for joint underwater perception.

Hyperspectral in situ sensing has shown promise in retrieving aquatic biogeochemical (BGC) parameters, such as total suspended solids, dissolved organic carbon, and total chlorophyll-a, for cost-effective monitoring of coastal water quality. However, generalising such retrieval algorithms across water bodies remains challenging, as the relationship between remote sensing reflectance (Rrs) and BGC parameters can vary considerably from one region to another due to regional distinctions in environmental conditions and biogeochemistry that lead to different BGC ranges and bio-optical properties. In this study, we propose a two-stage physics-aware meta-learning framework for retrieving coastal BGC parameters from near-surface Rrs observations. In the first stage, a bio-optical forward model is used to generate a large synthetic dataset based on an in situ bio-optical spectral library with broad representativeness of Australian coastal waters. This dataset is then used to pretrain a region-agnostic base model with meta-learning, allowing the model to learn fundamental physical relationships. In the second stage, the pretrained base model is fine-tuned for specific regions with local samples. We collected in situ hyperspectral Rrs and BGC measurements from five geographically distinct sites in Australian coastal waters. Our experimental results suggest: (1) the BGC parameters and their corresponding hyperspectral Rrs signatures exhibited clear regional distinctions among the experimental sites; (2) the synthetic dataset was physically plausible and closely aligned with real-world samples in both parameter distributions and inter-parameter correlations; (3) the proposed approach outperformed five benchmark models in BGC retrieval; and (4) time series of in situ measured and model-predicted BGC parameters showed good agreement in both magnitude and temporal dynamics.

This study presents a bio inspired signal processing framework for robust Underwater Acoustic Target Recognition (UATR). The latest state of the art methods often fail to resolve dense low frequency harmonic structures in vessel propulsion signals under high noise conditions, which is addressed by the proposed framework using a biologically inspired Gammatone filter bank that emulates the cochlea nonlinear frequency selectivity. By distributing filters according to the Equivalent Rectangular Bandwidth (ERB) scale, the framework achieves a high fidelity representation of engine radiated tonals while effectively suppressing isotropic ambient interference. The resulting Cochleagram features are processed by a lightweight, custom designed Convolutional Neural Network (CNN) that leverages large receptive fields to integrate spectral-temporal continuities. Experimental results on the VTUAD dataset demonstrate a state of the art classification accuracy of 98.41%, outperforming Continuous Wavelet Transform and Mel Frequency Cepstral Coefficients baselines by 3.5% and 7.7% respectively. Furthermore, the framework achieves an inference latency of only 0.77 ms and a 0.971 Cohen Kappa score, validating its efficacy for real time deployment on autonomous, low-power sonar hardware.

Identification of less-articulated objects using single-channel images, such as thermal images, is important in many applications, such as surveillance. However, in this domain, existing methods show poor performance due to high similarity among objects of the same category in the absence of color information (overlooking shape information) and de-emphasized texture information. Furthermore, variability in viewpoint adds more complexity as the features vary from side to side. We address these issues by constructing viewpoint-conditioned feature vectors and area-specific feature comparisons in separate feature spaces. These interventions enable leveraging the advancements of existing RGB-pre-trained ViT feature extractors while effectively adapting them to address the challenges specific to the thermal domain. We test our system with RGBNT100 (IR) vehicle dataset and a thermal maritime dataset acquired by us. Our results surpass the state-of-the-art methods by 19.7% and 12.8% for the above datasets in mAP scores, respectively. We also plan to make our thermal dataset available, the first of its kind for maritime vessel identification.

Autonomous underwater vehicles (AUVs) have become indispensable for deep-sea exploration, spanning critical scientific research and commercial applications. The rapid attenuation of electromagnetic waves renders satellite radio signals unavailable, while the dynamic unpredictability of the marine environment presents formidable navigation challenges. This chapter explores recent advancements in AI-aided AUV positioning, specifically focusing on advanced sensor fusion architectures that integrate inertial navigation systems with Doppler velocity logs and cameras. Beyond traditional model-based filtering, we examine the transformative emergence of AI-driven learning approaches in enhancing inertial dead-reckoning tasks and adaptive fusion algorithms. By addressing these recent milestones, this chapter provides a comprehensive roadmap for achieving the high-precision navigation essential for autonomous underwater missions.

Electrodermal activity (EDA) is widely used in wearable Internet of Medical Things (IoMT) systems for continuous health monitoring, including autonomic assessment. However, EDA signals are highly vulnerable to motion artifacts and environmental noise, limiting reliable deployment in harsh operating conditions such as underwater. This study proposes a robust, deployable EDA denoising framework that generalizes across multiple measurement locations and harsh environments. The framework integrates a hybrid CNN-Transformer teacher model with a lightweight depth-wise separable CNN student model via a knowledge distillation (KD) strategy. To further improve robustness, a realistic data augmentation scheme is introduced to simulate diverse motion artifacts and environmental distortions. The KD-based student model significantly reduces model size (7.87 MB to 0.51 MB) and computational cost (105.1M to 11.61M FLOPs) while maintaining denoising performance (MAE: 0.144, SNR improvement: 12.08 dB) using the public dataset validation. In real-world underwater conditions (UMAC dataset) testing, the proposed method substantially improves skin conductance response reconstruction, reducing mean absolute error from 2.809 to 0.215. Furthermore, on independent testing using the CNS-OT dataset, the denoised signals enhanced downstream CNS-OT prediction performance, achieving the highest AUROC (0.806) compared to prior denoising methods. The proposed method also improved the early prediction rate (sensitivity) from 0.550 to 0.767, enabling CNS-OT prediction up to a median of 6.9 minutes before symptom onset. These results demonstrate that the proposed framework not only improves EDA signal quality but also enhances clinically relevant prediction performance while remaining suitable for deployment in resource-constrained wearable Internet of Things systems operating in harsh environments.

Scientists increasingly rely on sensor-based data, yet transforming raw streams into insights across the edge-to-cloud continuum remains difficult. Provisioning heterogeneous infrastructure and managing execution on emerging platforms like Data Processing Units typically requires cross-domain expertise, creating significant barriers to rapid prototyping. This paper introduces an experience-driven methodology for the rapid development of sensor-driven applications. By combining pattern-based workflow engineering with AI-assisted development-implemented via Pegasus on the FABRIC testbed - we utilize an existing Orcasound hydrophone workflow as a reusable template. We introduce a pattern-based engineering methodology to generate and refine workflows for air quality, earthquake, and soil moisture monitoring. Furthermore, we show how these abstract structures are extended to edge resources through modular configuration and placement. Our evaluation focuses on user productivity and practical lessons rather than peak performance. Through these case studies, we illustrate how AI-assisted, pattern-based development lowers the entry barrier for non-experts and enables iterative exploration of sensor-driven applications across distributed infrastructures.

Accurate seabed mapping is essential for habitat monitoring and infrastructure inspection. In turbid, shallow coastal waters, such as shellfish aquaculture farms, the effectiveness of traditional optical methods is limited. Autonomous surface vehicles (ASVs) equipped with forward-looking sonar (FLS) offer a promising alternative. However, existing sonar-based systems face challenges in achieving fine resolution mapping over long trajectories due to low-resolution positioning measurements and accumulated drift over long trajectories. In this paper, we present a drift-resilient seabed mapping framework that integrates local FLS frame alignment using the Fourier-Mellin transform (FMT) with global trajectory optimization based on an extended Kalman filter (EKF) that fuses global positioning system (GPS), inertial measurement unit (IMU), and compass data. A variance-based image blending strategy is used to further reduce visual artifacts in overlapping regions. Field trials on a structured oyster farm site show that our framework helps reduce drift in RMSE by 9.5% relative to the FMT-only baseline. This framework also enables sub-meter reconstruction accuracy and preservation of high-resolution textures needed for oyster inventory estimation within the mapped areas.

Retrieval-augmented generation and tool-integrated LLM agents increasingly depend on external textual sources. This reliance broadens the available attack surface, allowing adversaries to insert malicious instructions that trigger unintended model behaviors. Current defensive measures often utilize LLM-based detectors to filter such content, but these approaches remain vulnerable to optimization-based attacks. Additionally, training-based methods frequently fail to generalize to novel data distributions. To resolve these issues, we introduce SONAR, a prompt sanitization framework that identifies and removes injected content using metrics from natural language inference. Specifically, SONAR constructs a sentence-level relational graph across the user query and external data. By using entailment and contradiction scores as edge weights, the system identifies sentences that deviate from the core task. It then employs connectivity-driven pruning to eliminate flagged injection seeds and their related neighbors while maintaining benign context. Rigorous evaluations across several models and datasets show that SONAR reduces the attack success rate to nearly zero, significantly outperforming nine established baseline defenses.

This study presents an unsupervised machine learning workflow for electrofacies analysis in the offshore Keta Basin, Ghana, where core data are scarce. Six standard wireline logs from Well~C were analysed over a depth interval comprising approximately $11{,}195$ samples. K-means clustering was applied in multivariate log space, with the clustering structure evaluated using inertia and silhouette diagnostics. Four clusters were identified, supported by an average silhouette coefficient of approximately $0.50$, indicating moderate but meaningful separation. The resulting electrofacies exhibit systematic, depth-continuous patterns associated with variations in clay content, porosity, and rock framework properties, forming a geological continuum from shale-dominated to cleaner sandstone-dominated units. The results demonstrate that log-only, unsupervised clustering supported by quantitative metrics provides a robust and reproducible framework for subsurface characterisation. The proposed workflow offers a practical tool for early-stage formation evaluation in frontier offshore basins and a foundation for future integrated studies.

Domain shift, where deviations between training and deployment data distributions degrade model performance, is a key challenge in underwater environments. Existing benchmarks testing performance for underwater domain shift simulate variability through synthetic style transfer. This fails to capture intrinsic scene factors such as visibility, illumination, scene composition, or acquisition factors, limiting analysis of real-world effects. We propose a labeling framework that defines underwater domains using measurable image, scene, and acquisition characteristics. Unlike prior benchmarks, it captures physically meaningful factors, enabling semantically consistent image grouping and supporting domain-specific evaluation of detection performance including failure analysis. We validate this on public datasets, showing systematic variations across domain factors and revealing hidden failure modes.

Landslide susceptibility prediction is critical for geohazard risk assessment and mitigation. Conventional data-driven paradigm achieves high predictive accuracy but require sufficient conditioning factors and large-scale landslide inventories. However, in practical engineering applications across mountainous and plateau regions, data-scarce conditions are commonly observed, where such data requirements are rarely satisfied, rendering conventional data-driven paradigm inapplicable. To address this issue, we propose a knowledge-data dually driven paradigm for accurate landslide susceptibility prediction under data-scarce conditions. The essential idea behind the proposed novel paradigm is the integration of the geomorphic prior knowledge with scarce landslide data. To validate the proposed paradigm, we first applied it to a data-rich region in central Italy, where a conventional data-driven paradigm trained on the full dataset served as the baseline. By utilizing only 30% of the available landslide data, the proposed paradigm achieved comparable predictive accuracy to the baseline, demonstrating its effectiveness under data-scarce conditions. The paradigm was further evaluated in a genuinely data-scarce environment for application, the Qilian Permafrost Region of the Tibetan Plateau, where it also yielded reliable susceptibility predictions, confirming its applicability under data-scarce conditions.

Containerised shipping underpins global trade, yet container loss at sea remains a persistent safety, environmental, and economic challenge. Despite compliance with Cargo Securing Manuals, dynamic maritime conditions such as vessel motion, wind loading, and severe sea states can progressively destabilise container stacks, leading to overboard losses. With the new International Maritime Organisation's (IMO) mandatory reporting requirements for lost containers, there is an urgent need for a reliable, evidence-based early detection solution for destabilised containers. This study showcases a low-cost, retrofittable computer vision-based system for early detection of destabilised containers using existing onboard cameras. The framework integrates object segmentation to isolate container stacks, temporal object tracking using optical flow and individual objects' residual motion extraction to quantify relative movement. Experimental evaluation on real onboard ship footage demonstrates that the proposed pipeline effectively isolates container-level motion under challenging conditions of varying sea states and visibility conditions. By enabling early alerts for crew intervention and navigational adjustment, the proposed approach enhances cargo safety, operational resilience, and regulatory compliance.

Videos captured in low-light and underwater conditions often suffer from distortions such as noise, low contrast, color imbalance, and blur. These issues not only limit visibility but also degrade automatic tasks like detection. Post-processing is typically required but can be time-consuming. AI-based tools for video enhancement also demand significantly more computational resources compared to image-based methods. This paper introduces a novel framework, Visual Mamba, designed to reduce memory usage and computational time by leveraging the Visual State Space (VSS) model. The framework consists of two modules: (i) a feature alignment module, where spatio-temporal displacement between input frames is registered in the feature space, and (ii) an enhancement module, where noise removal and brightness adjustment are performed using a UNet-like architecture, with all convolutional layers replaced by VSS blocks. Experimental results show that the Visual Mamba technique outperforms Transformer and convolution-based models in both low-light and underwater video enhancement tasks. Code is available on line at https://github.com/russellllaputa/BVI-Mamba.

Reconstructing realistic underwater scenes from underwater video remains a meaningful yet challenging task in the multimedia domain. The inherent spatiotemporal degradations in underwater imaging, including caustics, flickering, attenuation, and backscattering, frequently result in inaccurate geometry and appearance in existing 3D reconstruction methods. While a few recent works have explored underwater degradation-aware reconstruction, they often address either spatial or temporal degradation alone, falling short in more real-world underwater scenarios where both types of degradation occur. We propose MarineSTD-GS, a novel 3D Gaussian Splatting-based framework that explicitly models both temporal and spatial degradations for realistic underwater scene reconstruction. Specifically, we introduce two paired Gaussian primitives: Intrinsic Gaussians represent the true scene, while Degraded Gaussians render the degraded observations. The color of each Degraded Gaussian is physically derived from its paired Intrinsic Gaussian via a Spatiotemporal Degradation Modeling (SDM) module, enabling self-supervised disentanglement of realistic appearance from degraded images. To ensure stable training and accurate geometry, we further propose a Depth-Guided Geometry Loss and a Multi-Stage Optimization strategy. We also construct a simulated benchmark with diverse spatial and temporal degradations and ground-truth appearances for comprehensive evaluation. Experiments on both simulated and real-world datasets show that MarineSTD-GS robustly handles spatiotemporal degradations and outperforms existing methods in novel view synthesis with realistic, water-free scene appearances.

Underwater acoustic target recognition is critical for maritime applications, yet it faces challenges arising from the complex and diverse nature of ship-radiated noise. To address these issues, we propose a robust deep learning-based framework. First, we introduce a feature extraction and fusion method based on variational mode decomposition (VMD) and the 3/2-D spectrum to generate high-fidelity 2-D DEMON spectral features, which effectively capture modulation envelope information. To further enhance feature representation, we design a one-dimensional convolutional neural network (1-D CNN) integrated with a novel Multi-Stage Multi-Type Attention Mechanism (MMATT) that adaptively refines features at different network depths. Within this mechanism, we propose a Residual Channel-Independent Spectral Attention Mechanism (R-CISAM) and a Multi-Scale Separate-and-Fuse Spectral Attention Mechanism (MS-SFSAM). Moreover, to mitigate performance degradation caused by severe class imbalance inherent in real-world ship-radiated noise data, we devise an Adjustable Class-Balanced Focal Loss (ACBFL), which provides flexibility across tasks with varying degrees of imbalance. Experimental results on a real-world ship-radiated noise dataset demonstrate that the proposed solutions effectively enhance underwater acoustic target recognition performance.

Autonomous underwater vehicles are required to perform multiple tasks adaptively and in an explainable manner under dynamic, uncertain conditions and limited sensing, challenges that classical controllers struggle to address. This demands robust, generalizable, and inherently interpretable control policies for reliable long-term monitoring. Reinforcement learning, particularly multi-task RL, overcomes these limitations by leveraging shared representations to enable efficient adaptation across tasks and environments. However, while such policies show promising results in simulation and controlled experiments, they yet remain opaque and offer limited insight into the agent's internal decision-making, creating gaps in transparency, trust, and safety that hinder real-world deployment. The internal policy structure and task-specific specialization remain poorly understood. To address these gaps, we analyze the internal structure of a pretrained multi-task reinforcement learning network in the HoloOcean simulator for underwater navigation by identifying and comparing task-specific subnetworks responsible for navigating toward different species. We find that in a contextual multi-task reinforcement learning setting with related tasks, the network uses only about 1.5% of its weights to differentiate between tasks. Of these, approximately 85% connect the context-variable nodes in the input layer to the next hidden layer, highlighting the importance of context variables in such settings. Our approach provides insights into shared and specialized network components, useful for efficient model editing, transfer learning, and continual learning for underwater monitoring through a contextual multi-task reinforcement learning method.

Accurate quantification of the physical exposure area of beach litter, rather than simple item counts, is essential for credible ecological risk assessment of marine debris. However, automated UAV-based monitoring predominantly relies on bounding-box detection, which systematically overestimates the planar area of irregular litter objects. To address this geometric limitation, we develop PLAS-Net (Pixel-level Litter Area Segmentor), an instance segmentation framework that extracts pixel-accurate physical footprints of coastal debris. Evaluated on UAV imagery from a monsoon-driven pocket beach in Koh Tao, Thailand, PLAS-Net achieves a mAP_50 of 58.7% with higher precision than eleven baseline models, demonstrating improved mask fidelity under complex coastal conditions. To illustrate how the accuracy of the masking affects the conclusions of environmental analysis, we conducted three downstream demonstrations: (i) power-law fitting of normalized plastic density (NPD) to characterize fragmentation dynamics; (ii) area-weighted ecological risk index (ERI) to map spatial pollution hotspots; and (iii) source composition analysis revealing the abundance-area paradox: fishing gear constitutes a small proportion of the total number of items, but has the largest physical area per unit item. Pixel-level area extraction can provide more valuable information for coastal monitoring compared to methods based solely on counting.

Object detection models typically perform well on images captured in controlled environments with stable lighting, water clarity, and viewpoint, but their performance degrades substantially in real-world underwater settings characterized by high variability and frequent occlusions. In this work, we address these challenges by introducing a novel data augmentation framework designed to improve robustness in dense and unconstrained underwater scenes. Using the DeepFish dataset, which contains images of fish in natural environments, we first generate bounding box annotations from provided segmentation masks to construct a custom detection dataset. We then propose a pseudo-simulated annealing-based augmentation algorithm, inspired by the copy-paste strategy of Deng et al. [1], to synthesize realistic crowded fish scenarios. Our approach improves spatial diversity and object density during training, enabling better generalization to complex scenes. Experimental results show that our method significantly outperforms a baseline YOLOv10 model, particularly on a challenging test set of manually annotated images collected from live-stream footage in the Florida Keys. These results demonstrate the effectiveness of our augmentation strategy for improving detection performance in dense, real-world underwater environments.

Internal ice layers imaged by radar provide key evidence of snow accumulation and ice dynamics, but radar-derived layer boundary observations are often incomplete, with discontinuous traces and sometimes entirely missing layers, due to limited resolution, sensor noise, and signal loss. Existing graph-based models for ice stratigraphy generally assume sufficiently complete layer profiles and focus on predicting deeper-layer thickness from reliably traced shallow layers. In this work, we address the layer-completion problem itself by synthesizing complete ice-layer thickness annotations from incomplete radar-derived layer traces by conditioning on colocated physical features synchronized from physical climate models. The proposed network combines geometric learning to aggregate within-layer spatial context with a transformer-based temporal module that propagates information across layers to encourage coherent stratigraphy and consistent thickness evolution. To learn from incomplete supervision, we optimize a mask-aware robust regression objective that evaluates errors only at observed thickness values and normalizes by the number of valid entries, enabling stable training under varying sparsity without imputation and steering completions toward physically plausible values. The model preserves observed thickness where available and infers only missing regions, recovering fragmented segments and even fully absent layers while remaining consistent with measured traces. As an additional benefit, the synthesized thickness stacks provide effective pretraining supervision for a downstream deep-layer predictor, improving fine-tuned accuracy over training from scratch on the same fully traced data.

Rotating FMCW radar odometry methods often assume flat ground conditions. While this assumption is sufficient in many scenarios, including urban environments or flat mining setups, the highly dynamic terrain of subarctic environments poses a challenge to standard feature extraction and state estimation techniques. This paper benchmarks three existing radar odometry methods under demanding conditions, exhibiting up to 13° in pitch and 4° in roll difference between consecutive scans, with absolute pitch and roll reaching 30° and 8°, respectively. Furthermore, we propose a novel radar-inertial odometry method utilizing tilt-proximity submap search and a hard threshold for vertical displacement between scan points and the estimated axis of rotation. Experimental results demonstrate a state-of-the-art performance of our method on an urban baseline and a 0.3% improvement over the second-best comparative method on a 2-kilometer-long dynamic trajectory. Finally, we analyze the performance of the four evaluated methods on a complex radar sequence characterized by high lateral slip and a steep ditch traversal.

Traditional policy learning methods in cooperative pursuit face fundamental challenges in biomimetic underwater robots, where long-horizon decision making, partial observability, and inter-robot coordination require both expressiveness and stability. To address these issues, a novel framework called Mamba-based multi-agent group relative policy optimization (M$^{2}$GRPO) is proposed, which integrates a selective state-space Mamba policy with group-relative policy optimization under the centralized-training and decentralized-execution (CTDE) paradigm. Specifically, the Mamba-based policy leverages observation history to capture long-horizon temporal dependencies and exploits attention-based relational features to encode inter-agent interactions, producing bounded continuous actions through normalized Gaussian sampling. To further improve credit assignment without sacrificing stability, the group-relative advantages are obtained by normalizing rewards across agents within each episode and optimized through a multi-agent extension of GRPO, significantly reducing the demand for training resources while enabling stable and scalable policy updates. Extensive simulations and real-world pool experiments across team scales and evader strategies demonstrate that M$^{2}$GRPO consistently outperforms MAPPO and recurrent baselines in both pursuit success rate and capture efficiency. Overall, the proposed framework provides a practical and scalable solution for cooperative underwater pursuit with biomimetic robot systems.

The reconstruction of ocean subsurface temperature (OST) using satellite remote sensing data holds significant scientific value for advancing the understanding of ocean dynamics and climate variability. However, the scarcity of subsurface observations, combined with the high degree of nonlinearity and spatiotemporal heterogeneity in subsurface processes, poses substantial challenges to the accuracy and generalization capability of traditional reconstruction methods. To address these limitations, this study proposes an adaptive framework that could capture both vertical structural dependencies and temporal variation patterns of OST via spatio-temporal clustering. By incorporating this framework with various deep learning models, e.g., dual-path convolutional neural networks (DP-CNN), Attention U-Net, and Vision Transformer (ViT), the OST field can be accurately reconstructed at a global scale only using surface observations, i.e., sea surface temperature (SST), sea surface salinity (SSS), sea surface height (SSH), and sea surface wind (SSW). Experimental results demonstrate that multiple deep learning methods using the proposed framework largely outperform their original counterparts, yielding improvements in RMSE ranging from 12.4% to 27.2%. This study provides a reliable solution for subsurface temperature reconstruction, offering important implications for meteorological modeling and climate change assessment.

Robust 3D reconstruction across varying environmental conditions remains a critical challenge for robotic perception, particularly when transitioning between air and water. To address this, we introduce BALTIC, a controlled benchmark designed to systematically evaluate modern 3D reconstruction methods under variations in medium and lighting. The benchmark comprises 13 datasets spanning two media (air and water) and three lighting conditions (ambient, artificial, and mixed), with additional variations in motion type, scanning pattern, and initialization trajectory, resulting in a diverse set of sequences. Our experimental setup features a custom water tank equipped with a monocular camera and an HTC Vive tracker, enabling accurate ground-truth pose estimation. We further investigate cross-domain reconstruction by augmenting underwater image sequences with a small number of in-air views captured under similar lighting conditions. We evaluate Structure-from-Motion reconstruction using COLMAP in terms of both trajectory accuracy and scene geometry, and use these reconstructions as input to Neural Radiance Fields and 3D Gaussian Splatting methods. The resulting models are assessed against ground-truth trajectories and in-air references, while rendered outputs are compared using perceptual and photometric metrics. Additionally, we perform a color restoration analysis to evaluate radiometric consistency across domains. Our results show that under controlled, texture-consistent conditions, Gaussian Splatting with simple preprocessing (e.g., white balance correction) can achieve performance comparable to specialized underwater methods, although its robustness decreases in more complex and heterogeneous real-world environments

This paper presents a virtual boundary integral neural network (VBINN) for exterior acoustic problems in three dimensions. The method introduces a virtual boundary inside the scatterer or vibrating body and represents the associated source density with a neural network. Coupled with the acoustic fundamental solution, this representation satisfies the Sommerfeld radiation condition by construction and enables direct evaluation of the acoustic pressure and its normal derivative at arbitrary field points. Because the integration surface is separated from the physical boundary, the formulation avoids the singular and near singular kernel evaluations associated with coincident source and collocation points in conventional boundary integral learning methods. To reduce sensitivity to boundary placement, the geometric parameters of the virtual boundary are optimized jointly with the source density during training. Numerical examples for acoustic scattering, multiple body interaction, and underwater acoustic propagation show close agreement with analytical solutions and COMSOL results, and the Burton Miller extension further improves stability near characteristic frequencies. These results demonstrate the potential of VBINN for exterior acoustic analysis in three dimensions.

This report presents the NTIRE 2026 Rip Current Detection and Segmentation (RipDetSeg) Challenge, which targets automatic rip current understanding in images. Rip currents are hazardous nearshore flows that cause many beach-related fatalities worldwide, yet remain difficult to identify because their visual appearance varies substantially across beaches, viewpoints, and sea states. To advance research on this safety-critical problem, the challenge builds on the RipVIS benchmark, evaluating both detection and segmentation. The dataset is diverse, sourced from more than $10$ countries, with $4$ camera orientations and diverse beach and sea conditions. This report describes the dataset, challenge protocol, evaluation methodology, final results, and summarizes the main insights from the submitted methods. The challenge attracted $159$ registered participants and produced $9$ valid test submissions across the two tasks. Final rankings are based on a composite score that combines $F_1[50]$, $F_2[50]$, $F_1[40\!:\!95]$, and $F_2[40\!:\!95]$. Most participant solutions relied on pretrained models, combined with strong augmentation and post-processing design. These results suggest that rip current understanding benefits strongly from the robust general-purpose vision models' progress, while leaving ample room for future methods tailored to their unique visual structure.

We present E2E-WAVE, the first end-to-end learned waveform generation system for underwater video multicasting. Acoustic channels exhibit 20--46% bit error rates where forward error correction becomes counterproductive -- LDPC increases rather than decreases errors beyond its decoding threshold. E2E-WAVE addresses this by embedding semantic similarity directly into physical layer waveforms: when decoding errors are unavoidable, the system preferentially selects semantically similar tokens rather than arbitrary corruption. Combining VideoGPT tokenization (1024x compression) with a trainable waveform bank and fully differentiable OFDM transmission, E2E-WAVE achieves +5 dB (19.26%) PSNR and +0.10 (14.28%) SSIM over the strongest FEC-protected baseline in less challenging underwater channel (NOF1) while delivering real-time 16 FPS video at 128x128 resolution over 2.3 kbps channels -- impossible for conventional digital modulation. The performance gap only increases in harsher channels (BCH1, NCS1). Trained on a single channel, E2E-WAVE generalizes to unseen underwater environments without retraining, while HEVC fails at sub-5 kbps rates and SoftCast's AWGN assumptions collapse on frequency-selective channels.

Underwater images often suffer from severe degradation, such as color distortion, low contrast, and blurred details, due to light absorption and scattering in water. While learning-based methods like CNNs and Transformers have shown promise, they face critical limitations: CNNs struggle to model the long-range dependencies needed for non-uniform degradation, and Transformers incur quadratic computational complexity, making them inefficient for high-resolution images. To address these challenges, we propose Hero-Mamba, a novel Mamba-based network that achieves efficient dual-domain learning for underwater image enhancement. Our approach uniquely processes information from both the spatial domain (RGB image) and the spectral domain (FFT components) in parallel. This dual-domain input allows the network to decouple degradation factors, separating color/brightness information from texture/noise. The core of our network utilizes Mamba-based SS2D blocks to capture global receptive fields and long-range dependencies with linear complexity, overcoming the limitations of both CNNs and Transformers. Furthermore, we introduce a ColorFusion block, guided by a background light prior, to restore color information with high fidelity. Extensive experiments on the LSUI and UIEB benchmark datasets demonstrate that Hero-Mamba outperforms state-of-the-art methods. Notably, our model achieves a PSNR of 25.802 and an SSIM of 0.913 on LSUI, validating its superior performance and generalization capabilities.

In Global Navigation Satellite System (GNSS)-denied underwater environments, individual unmanned underwater vehicles (UUVs) suffer from unbounded dead-reckoning drift, making collaborative navigation (CN) crucial for accurate state estimation. However, the severe communication delay inherent in underwater acoustic channels poses serious challenges to real-time state estimation. Traditional filters, such as Extended Kalman Filters (EKFs) or Unscented Kalman Filters (UKFs), usually block the main control loop while waiting for delayed data, or effectively discard Out-of-Sequence Measurements (OOSMs), resulting in serious drift. To address this, we propose an Asynchronous Two-Speed Kalman Filter (TSKF) enhanced by a novel projection mechanism, which we term Variational History Distillation (VHD). The proposed architecture decouples the estimation process into two parallel threads: a fast-rate thread that utilizes Gaussian Process (GP) compensated dead reckoning to guarantee high-frequency real-time control, and a slow-rate thread dedicated to processing asynchronously delayed collaborative information. By introducing a Finite-Length Circular State Buffer (FLCSB), the algorithm applies delayed measurements to their corresponding historical states, and utilizes a VHD-based projection to fast-forward the correction to the current time without computationally heavy recalculations. Simulation results demonstrate that the proposed TSKF maintains a trajectory error comparable to computationally intensive batch-optimization methods under severe delays (up to 30,s). Executing in sub-millisecond time, it significantly outperforms standard EKF/UKF. The results demonstrate an effective control, communication, and computing (3C) co-design that significantly enhances the resilience of autonomous marine automation systems.

Autonomous underwater vehicles (AUVs) are increasingly used to survey coral reefs, yet efficiently locating specific coral species of interest remains difficult: target species are often sparsely distributed across the reef, and an AUV with limited battery life cannot afford to search everywhere. When detections of the target itself are too sparse to provide directional guidance, the robot benefits from an additional signal to decide where to look next. We propose using the visual environmental context -- the habitat features that tend to co-occur with a target species -- as that signal. Because context features are spatially denser and often vary more smoothly than target detections, we hypothesize that a reward function targeted at broader environmental context will enable adaptive planners to make better decisions on where to go next, even in regions where no target has yet been observed. Starting from a single labeled image, our method uses patch-level DINOv2 embeddings to perform one-shot detections of both the target species and its surrounding context online. We validate our approach using real imagery collected by an AUV at two reef sites in St. John, U.S. Virgin Islands, simulating the robot's motion offline. Our results demonstrate that one-shot detection combined with adaptive context modeling enables efficient autonomous surveying, sampling up to 75$\%$ of the target in roughly half the time required by exhaustive coverage when the target is sparsely distributed, and outperforming search strategies that only use target detections.

Underwater robots are widely deployed for ocean exploration and manipulation. Underactuated mechanisms are advantageous in aquatic environments because reducing actuator count lowers motor-leakage risk while introducing inherent mechanical compliance. However, accurate modeling of underwater underactuated and soft robotic systems remains challenging, as it requires identifying high-dimensional structural and hydrodynamic parameters. In this work, we propose a trajectory-driven global optimization framework for unified structural-hydrodynamic modeling of underwater multibody systems. Inspired by the Covariance Matrix Adaptation Evolution Strategy (CMA-ES), the proposed approach simultaneously identifies coupled elastic, damping, and distributed hydrodynamic parameters through trajectory-level matching between simulated and experimental motion. This enables high-fidelity reproduction of underactuated mechanisms and compliant soft robotic systems in underwater environments, using as little as a single video recording. We first validate the framework on a link-by-link underactuated multibody mechanism, demonstrating accurate identification of distributed hydrodynamic coefficients, with normalized end-effector position error below 5% across multiple trajectories, initial conditions, and both active-passive and fully passive configurations. The modeling strategy is further validated on an asymmetric octopus-inspired soft arm, confirming its effectiveness for compliant soft robotic systems. Finally, eight identified arms are assembled into a swimming octopus robot, where the unified parameter set enables realistic whole-body behavior without additional retuning. These results demonstrate the scalability and transferability of the proposed structural-hydrodynamic modeling framework across underwater underactuated and soft robotic systems.

Autonomous robotic systems are increasingly deployed for mapping, monitoring, and inspection in complex and unstructured environments. However, most existing path planning approaches remain domain-specific (i.e., in the air, on land, or at sea), limiting their scalability and cross-platform applicability. This article presents OmniPlanner, a unified planning framework for autonomous exploration and inspection across aerial, ground, and underwater robots. The method integrates volumetric exploration and viewpoint-based inspection, alongside target reach behaviors within a single modular architecture, complemented by a platform abstraction layer that captures morphology-specific sensing, traversability and motion constraints. This enables the same planning strategy to generalize across distinct mobility domains with minimal retuning. The framework is validated through extensive simulation studies and field deployments in underground mines, industrial facilities, forests, submarine bunkers, and structured outdoor environments. Across these diverse scenarios, OmniPlanner demonstrates robust performance, consistent cross-domain generalization, and improved exploration and inspection efficiency compared to representative state-of-the-art baselines. Videos presenting the OmniPlanner framework and demonstrating its field deployments across aerial, ground, and underwater robots are available at https://ntnu-arl.github.io/omniplanner, and the source code is publicly available at https://github.com/ntnu-arl/gbplanner_ros/tree/gbplanner3.

Field robotics research in maritime and space domains is constrained by a persistent gap between low-cost, low-fidelity simulation and costly offshore experimentation. Instrumented water tanks partially bridge this gap but often provide limited sensing, restricted experimental capabilities, and weak integration with simulation tools. To address these limitations, we present Marinarium, a modular, standalone experimental facility that provides a cost-effective intermediate testbed between simulation and field deployment. Marinarium combines a fully instrumented underwater and aerial operational volume with motion capture (MoCap), a retractable roof enabling both sheltered and open-air operation, a digital twin implemented in SMaRCSim, and direct integration with a planar space robotics laboratory, enabling both maritime and underwater space-analog experimentation. We present the design rationale of the facility and validate its capabilities through four representative studies in field robotics: (i) data-driven system identification of underwater vehicle dynamics; (ii) heterogeneous multi-domain robotic rendezvous; (iii) sim-to-real transfer for underwater robotics using learned dynamics residuals; and (iv) cross-domain validation of spacecraft autonomy using underwater surrogates. Together, these studies demonstrate that Marinarium enables reproducible, instrumented experimentation across multiple field robotics challenges that would otherwise require costly offshore deployments or be impractical to investigate using simulation alone.

Localization and mapping are core perceptual capabilities for underwater robots. Stereo cameras provide a low-cost means of directly estimating metric depth to support these tasks. However, despite recent advances in stereo depth estimation on land, computing depth from image pairs in underwater scenes remains challenging. In underwater environments, images are degraded by light attenuation, visual artifacts, and dynamic lighting conditions. Furthermore, real-world underwater scenes frequently lack rich texture useful for stereo depth estimation and 3D reconstruction. As a result, stereo estimation networks trained on in-air data cannot transfer directly to the underwater domain. In addition, there is a lack of real-world underwater stereo datasets for supervised training of neural networks. Poor underwater depth estimation is compounded in stereo-based Simultaneous Localization and Mapping (SLAM) algorithms, making it a fundamental challenge for underwater robot perception. To address these challenges, we propose a novel framework that enables sim-to-real training of underwater stereo disparity estimation networks using simulated data and self-supervised finetuning. We leverage our learned depth predictions to develop SurfSLAM, a novel framework for real-time underwater SLAM that fuses stereo cameras with IMU, barometric, and Doppler Velocity Log (DVL) measurements. Lastly, we collect a challenging real-world dataset of shipwreck surveys using an underwater robot. Our dataset features over 24,000 stereo pairs, along with high-quality, dense photogrammetry models and reference trajectories for evaluation. Through extensive experiments, we demonstrate the advantages of the proposed training approach on real-world data for improving stereo estimation in the underwater domain and for enabling accurate trajectory estimation and 3D reconstruction of complex shipwreck sites.

Holonomic autonomous underwater vehicles (AUVs) have the hardware ability for agile maneuvering in both translational and rotational degrees of freedom (DOFs). However, due to challenges inherent to underwater vehicles, such as complex hydrostatics and hydrodynamics, parametric uncertainties, and frequent changes in dynamics due to payload changes, control is challenging. Performance typically relies on carefully tuned controllers targeting unique platform configurations, and a need for re-tuning for deployment under varying payloads and hydrodynamic conditions. As a consequence, agile maneuvering with simultaneous tracking of time-varying references in both translational and rotational DOFs is rarely utilized in practice. To the best of our knowledge, this paper presents the first general zero-shot sim2real deep reinforcement learning-based (DRL) velocity controller enabling path following and agile 6DOF maneuvering with a training duration of just 3 minutes. Sim2Swim, the proposed approach, inspired by state-of-the-art DRL-based position control, leverages domain randomization and massively parallelized training to converge to field-deployable control policies for AUVs of variable characteristics without post-processing or tuning. Sim2Swim is extensively validated in pool trials for a variety of configurations, showcasing robust control for highly agile motions.