Robot Systems

Generative vision-language-action policies have advanced robot manipulation, but they often exhibit instability under noise, partial observability, and stochastic initial conditions. During extended rollouts, small velocity errors accumulate, degrading execution reliability. Existing diffusion and flow-based policies typically assume homoscedastic residuals and lack explicit uncertainty modeling within action generation, limiting robustness during iterative rollout. We propose SUREFlow, a state-space uncertainty-aware residual flow matching framework built on a Mamba backbone. The method jointly predicts action velocities and input-dependent residual uncertainty, enabling selective refinement of unreliable action dimensions without environment feedback while preserving computational efficiency. On LIBERO, SUREFlow achieves 92.5% average success rate (SR), outperforming the Mamba-based MaIL by 34.2%. On LIBERO-PRO, it attains around 49% SR using only 179M parameters, achieving performance comparable to large VLAs with 3-7B parameters. SUREFlow source code is available on: https://github.com/tanvirnwu/SUREFlow

Safe and socially compliant navigation remains a fundamental challenge for autonomous robots operating in human-populated environments. Beyond collision avoidance, robots must anticipate human motion and respect personal space to ensure human comfort. Model Predictive Control (MPC) offers a robust alternative to classical and data-driven methods, although its effectiveness strongly depends on accurate human motion prediction and efficient computation. This paper introduces SFM-NMPC, a Social Force Model-based Non-linear Model Predictive Control framework that embeds human motion prediction directly within the optimization loop. By incorporating the Social Force Model into the dynamic model of surrounding agents, the controller jointly predicts the trajectories of humans and robots over the prediction horizon, thereby enabling socially-aware planning. A tailored set of social cost functions guides the optimization toward human-compliant behaviors. Despite the increased model complexity, the proposed formulation runs in real time at 20 Hz. Extensive simulated testing in crowded environments demonstrates that SFM-NMPC outperforms state-of-the-art baselines in social compliance metrics while maintaining efficient and smooth navigation. Visual trajectory analysis and an ablation study further highlight the contribution of the embedded SFM dynamics and social cost terms, confirming the effectiveness of the proposed approach for real-world social navigation.

State estimation is essential for quadruped robots, enabling robust locomotion, navigation, and control. While many estimators have been proposed in the literature, existing implementations are often tied to specific robots or software stacks, making fair comparisons difficult. This lack of a general-purpose benchmarking framework hinders reproducibility and slows down algorithmic innovation. In this paper, we introduce Chalito, an extensible MATLAB/Python library for benchmarking filter-based state estimation algorithms in quadruped robots. Chalito imports robot models directly from URDF, supports multiple filtering approaches, and is designed to be easily extended with new methods. The framework runs on both simulated and real datasets, enabling systematic evaluation across robots and filters. To the best of our knowledge, this is the first open-source library exclusively dedicated to benchmarking filtering algorithms for quadruped robots.

We aim to address the challenge of teleoperating robotic arms for high-degree-of-freedom (high-DoF) manipulation tasks, which is cognitively demanding and error-prone, particularly when relying on low-bandwidth interfaces. We propose Robot Trajectron V3 (RT-V3), a probabilistic shared control framework designed for $SE(3)$ grasping tasks. RT-V3 formulates shared control as Bayesian inference by learning a prior over user intent and combining it with real-time user commands to estimate the posterior intent distribution. The prior models user intent as a distribution over future trajectories conditioned on past robot dynamics and visual scene context. The intent prior is parameterized by a transformer-based conditional generative model that reasons over point clouds and candidate grasp poses, together with a factorized translation-rotation representation that improves learning efficiency in high-dimensional action spaces. During execution, RT-V3 continuously estimates the posterior distribution over future trajectories by combining the learned intent prior with a user-command likelihood derived from the observed control input, enabling continuous intent refinement and shared assistance. Comprehensive experiments demonstrate that RT-V3 achieves high accuracy in trajectory prediction and competitive performance in reactive planning. Furthermore, real-world user studies indicate that RT-V3 significantly outperforms baseline methods in terms of success rate and efficiency, while substantially reducing the user's physical and mental workload.

Multi-UAV exploration is often constrained by unreliable communication, limited field-of-view sensing (e.g., lightweight onboard camera), and finite travel budgets that require each robot to reserve enough budget to return to its base. We present Dec-MARVEL, a decentralized budget-aware exploration framework for communication-free teams with directional sensing. Rather than exchanging maps, goals, or messages, each robot coordinates through its incidental observations: any teammate trajectory within its field of view serves as a coordination signal. A graph-attention actor fuses local frontier geometry, teammate motion, and budget features to select return-feasible waypoint-heading actions. The actor is trained with phase-conditioned critics, a training-only task-oriented privileged critic, and a mixture-based budget curriculum. Across 900 held-out trials spanning three team sizes (2, 4, 8 robots) and three travel budgets (720, 800, 1024 meters) against four baselines, Dec-MARVEL achieves the highest or tied-highest exploration rate and lowest sensing overlap across all nine team-size budget configurations. Under our tightest 720m budget, it reaches 53%, 94%, and 100% success for 2, 4, and 8 robots, versus 37%, 83%, and 99% for the strongest baseline. Physical-robot experiments demonstrate successful sim-to-real transfer and real-world deployment of Dec-MARVEL.

The advent of video-action models offers a promising path for robot control. Nevertheless, we argue that repurposing video generative models designed for digital content creation is inherently inadequate for physical environments. To bridge this gap, we present LingBot-VA 2.0, a video-action foundation model built from the ground up for embodiment. Four core design principles showcase its evolution from LingBot-VA. (1) Departing from traditional reconstruction-focused VAEs, we introduce a semantic visual-action tokenizer, which aligns visual representations with both semantics and actions, improving instruction following and action precision in subsequent policy learning. (2) Given the strictly causal nature of temporal dynamics, we adopt a causal pretraining paradigm, training from scratch to circumvent the catastrophic forgetting that frequently occurs when adapting bidirectional architectures. (3) To meet the demands of high-frequency inference, our model employs a sparse MoE backbone, expanding model capacity without compromising efficiency. (4) Real-time closed-loop control is realized through an enhanced asynchronous inference scheme, which predicts future latents in parallel with action execution while re-grounding each rollout on the latest observation via learned forward dynamics. Real-world deployment validates LingBot-VA 2.0 as a robust foundation model, as evidenced by its few-shot generalization across complex manipulation tasks.

As human-robot interaction rapidly spreads in numerous fields, the subject of robot acceptance gains increasing importance. Visual similarity to the human body, as occurs for humanoids, is generally not enough to ensure acceptance in physical interaction, as acceptance directly links to comfort and ergonomics, which are measured in terms of the quality of the robot movement perceived by the human. This paper discusses the connection between comfort and similarity of the robot movement to the human one. By considering the kinematic characterization of human movement, this paper focuses on the time laws of such movements, wherein the end-effector path is prescribed. Based on the lognormality principle for modeling human movements, a human-likeness index is defined and used to provide an a priori characterization of trajectories. Such an index can be used to evaluate the performance of trajectory generation algorithms in producing human-like movements before they are actually executed. For validation purposes, 68 subjects are required to judge their comfort. The results of three experimental campaigns involving a physical interaction with a robot demonstrate a globally consistent trend between the preference in terms of perceived comfort and the distribution of the suggested human-likeness index.

Long-horizon robot planning requires jointly reasoning over semantic task structure and geometric feasibility. To successfully execute a task, a robot must decompose goals, select task-relevant objects, and sequence actions, while ensuring that plans satisfy spatial constraints such as limited free space and object collisions. In this work, we propose APIVOT, a VLM-based planner that adaptively interleaves language and visual thoughts for long-horizon planning. APIVOT learns to leverage language for semantic reasoning, while using visual thoughts as imagined future states for internal verification of geometric feasibility. On long-horizon kitchen tasks, APIVOT outperforms general-purpose VLMs and prior planning frameworks, achieving the largest gains in spatially constrained settings. We find that APIVOT learns meaningful modality selection behavior, demonstrating that adaptive interleaving of vision-language thoughts improves both planning success and reasoning efficiency.

Recent advances in actuation, control and learning have rapidly pushed humanoid robots from a distant vision towards near-term real-world deployment. Healthcare is a particularly pressing domain, in which staffing shortages and increasing care demand are widening the gap between clinical workload and available skilled labour. Although current automation has largely focused on digital and logistical tasks, much hospital work remains embodied, requiring mobility, manipulation and safe interaction in human-designed environments. Humanoid form factors offer unique potential, particularly for assisting with surgical tasks. Traditionally, robotic systems for surgery are purpose-built platforms such as Intuitive Surgical's da Vinci Surgical System, and it remains unclear how close current humanoid systems are to meeting the precision, control and safety requirements of minimally invasive surgery. Here we present a systematic evaluation of contemporary humanoid technology for laparoscopic surgical tasks. We develop a humanoid-based laparoscopic teleoperation framework using general-purpose instruments and assess its abilities through benchtop characterization, dry-laboratory user studies spanning diverse surgical experience levels and in vivo porcine studies. Across these evaluations, we quantify technical feasibility, task performance and clinical readiness relative to established surgical platforms. Together, our study provides an evidence-based assessment of current humanoid abilities and limitations for surgical applications, highlighting both their promise and key technical challenges that must be addressed before clinical deployment.

Dynamic obstacle avoidance in unstructured outdoor environments remains a critical challenge for autonomous mobile robots, particularly when large-scale robot-specific training data and simulation-based policies are impractical. We present a data-efficient, interpretable method for vision-based dynamic obstacle avoidance that operates entirely on real-world data, avoiding the sim-to-real transfer problem inherent in simulation-trained policies. Our approach leverages UniDepth, a large pretrained monocular depth estimation model, to produce dense depth maps from RGB video without requiring stereo cameras or LiDAR at inference time. Dynamic obstacle avoidance is achieved by extending the SuperPoint and SuperGlue feature correspondence pipeline to track keypoints across long frame sequences, projecting their 2D pixel-space positions into 3D using camera intrinsics and predicted depth, running bundle adjustment initialized from these 3D keypoints, and computing per-keypoint time-to-collision (TTC). A 2D motion primitive in the ground plane is then selected to move the robot away from the closest point of approach of the minimum-TTC keypoint. Evaluated on real-world data from the M3ED dataset, our pipeline achieves a precision of 0.49 and a recall of 0.38 in identifying frames with a ground truth TTC below 1 second, and correctly generates the evasive motion direction in 84% of true positive detections. Crucially, it detects at least one frame with TTC less than 1 second for 20 out of 22 unique physical obstacles present in our test sequences. Unlike end-to-end learned methods that demand thousands of hours of robot-specific training data, our approach eliminates model training entirely, requiring only 74 seconds of data for hyperparameter tuning. This demonstrates exceptional data efficiency while preserving interpretable and generalizable behavior across diverse obstacle types.

The scalability of organic agriculture is partially limited by the labor costs associated with monitoring for pests. While drones and rovers are well-suited for agricultural monitoring from above or next to plants, many pests live on the underside of leaves or on plant stems, making them detectable only after they have caused significant damage. To enable early pest detection we present STEMbot, a miniature climbing robot system designed for autonomous navigation under plant canopies. Unlike existing climbing platforms that lack on-board perception or are restricted to unbranched vertical trunks, STEMbot integrates a fully geometric PIN-SLAM pipeline with a semantic OcTree to achieve robust localization and mapping while climbing the plant. To plan STEMbot's motion we propose a manifold-constrained A* planner along with ray-tracing goal specification to enable branch-aware traversal and the inspection of occluded targets. We validate our system through hardware experiments, demonstrating reliable traversal of stems ranging from 7-33mm and autonomous navigation across four distinct plant specimens. Quantitative evaluations show that our system achieves high-fidelity geometric reconstructions with an average Chamfer distance of less than 1cm relative to an offline photogrammetry baseline, confirming that STEMbot maintains the globally consistent odometry needed for autonomous navigation.

Nonverbal communication through head and neck movement is fundamental to human social signalling, yet how robotic neck morphology translates motion into communicative information remains poorly understood. We present an information-theoretic framework characterising robot neck movement as a communication channel, quantifying information transmitted and energy expended across varied configurations. Using a robotic neck platform, we recorded 84 video stimuli spanning three rotational degrees of freedom (DoF), varying amplitude, acceleration, and frequency, measuring Shannon entropy of pixel-change signals alongside energy consumption. A perceptual study validated communicative interpretations of each motion. While humans typically engage one axis per gesture, robots are unconstrained by biological architecture, motivating tests up to 3 DoF. Yet communicative information peaks at two DoF and decreases at three despite rising energy cost, a phenomenon we term the morphological information bottleneck. Motion parameter effects were parameter-dependent, some additive, others non-linear. We introduce the Motor Information Space, a framework mapping entropy against energy to expose communicative efficiency across morphologies, in which the optimal configuration achieves 5.26 bits at competitive energy cost. Perception data further confirm multi-axis movements reduce clarity. These findings challenge the assumption that anatomical completeness improves robotic expressiveness, establishing a quantitative basis for morphological design in robots, especially humanoids.

The motion controller is one of the most fundamental modules in embodied intelligence systems. Driven by large-scale human motion-capture data and the motion-tracking paradigm, humanoid control has achieved remarkable progress in recent years. However, migrating this recipe to the quadrupedal setting is far less straightforward: animal motion data is scarcer and harder to capture at scale than human data, and cross-embodiment retargeting remains fragile. We present ABot-C0, a generalist motion-control system for quadruped robots that establishes three complementary behavior foundations: a scalable multi-source motion-data pipeline, robust policy learning across motion tracking, locomotion, and scene interaction, and a unified deployment stack for reliable real-world operation. Fundamentally, we construct a data pyramid through conditional video-generation synthesis, annotated motion capture, teleoperation, and human design, producing 16,074 physically feasible motion clips as the data foundation for diverse motion-learning demands. With large-scale motion data, a Flow-Matching generalist policy demonstrates, for the first time, a scaling law for quadruped motion tracking: performance improves consistently as training scales up, with zero-shot capability to track unseen motions. We then go a step further toward robust all-terrain locomotion by adopting a three-stage privileged-to-perceptive framework with temporal LiDAR memory and terrain-predictive supervision. Collectively, these components form a motion generalist that coordinates multi-policy execution, smooth behavior transitions, energy-efficient control, and safety mechanisms for real-world deployment. Extensive experiments on urban-terrain autonomous navigation and companion-style multimodal interaction demonstrate that quadruped robots can move beyond functional demos toward product-level behavioral intelligence.

Effective social robot navigation requires sensitivity to human behavior, often revealed through subtle skeletal cues like gait and orientation. We present Human-Aware Implicit Social Robot Navigation (HumAIN), a novel framework that fuses implicit social cues directly into the planning loop via knowledge distillation. We first employ a transformer-based teacher model that fuses rich multi-modal inputs, including historic images, skeletal keypoints, robot state, and a robot's target goal, to learn robust, human-aware representations for the robot's future trajectory planning. To enable real-time deployment, we then distill this knowledge into a lightweight student model. By optimizing for both trajectory reconstruction and latent feature alignment with the teacher, the student learns to infer complex social dynamics from minimal inputs. Bridging the prediction-planning gap with an efficient distilled architecture, our method enables robots to reason about human behavior in a manner that is adaptive, robust, and socially compliant. We validate HumAIN through extensive experiments, where it improves trajectory prediction metrics by an average of 29.8% across all metrics compared to state-of-the-art baselines. These results highlight the benefit of using implicit, whole-body cues to achieve human-like navigation awareness on resource-constrained platforms.

Turn-taking prediction is a key requirement for social robots involved in human-human interaction, particularly in mediator settings, where the robot must anticipate conversational dynamics rather than merely react to pauses. This work presents a Multimodal Voice Activity Projection (MM-VAP) framework that extends the original audio-only VAP formulation to synchronized audio-visual inputs while preserving its self-supervised future-projection objective. The proposed approach builds on pretrained audio-visual backbones originally optimized for speech-related tasks and adapts them through Low-Rank Adaptation to the multimodal turn-taking problem. After independent speaker encoding, an inter-speaker attention stage models the relational dynamics required to project future voice activity. In addition, a semantic consistency loss is introduced to regularize the 256-state output space according to higher-level dialogue activity patterns. Experiments on NoXi and NoXi+J showed improvements over the current baselines, particularly for some turn-taking events. Additional evaluation on the Haru EDR corpus further supported the suitability of this direction for mediation-oriented human-robot interaction.

Proprioception is fundamental to robotic manipulation, yet standard fusion methods often treat it as an isolated vector lacking explicit alignment with visual tokens. Without a direct correspondence between 3D kinematics and 2D feature maps, manipulation policies struggle to ground the robot's state within the scene, frequently underperforming even vision-only baselines. To address this, we introduce GeoProp, a lightweight, plug-and-play adapter that aligns proprioception with vision through explicit geometric grounding and spatial feature sampling. GeoProp projects the robot state onto the image plane to sample localized visual features, constructing a grounded state token. It then injects state-derived spatial priors into the corresponding visual features via FiLM modulation. To capture motion intent, GeoProp further samples features at a short-horizon predicted coordinate derived from recent kinematics, providing look-ahead visual context. Across 67 tasks, GeoProp improves Diffusion Policy by 8.7% on 63 simulation tasks and pi_0 by 4.0% on the RoboTwin subset, and yields a 10.6% average gain across both policy families in the real world, while adding only 2-3% to the parameter count. These results demonstrate that GeoProp is a simple yet high-impact inductive bias for generalist embodied policies. Project page: https://alibaba-damo-academy.github.io/GeoProp/.

Table tennis, a dynamic, compact, and popular sport, has received significant attention as a robotics benchmark over the last decades. Most of the research has focused on the rally aspect - returning an incoming ball - requiring high-speed vision, agile motion planning, and tight closed-loop control. However, the other component of table tennis gameplay - the serve - is comparatively a quite unexplored research problem, that in fact requires pushing physics modeling and control to the extremes. Achieving competitive serves with a robot presents domain-specific challenges, such as high-spin generation from a spinless ball, precise aiming, or multi-objective optimization. In this work, we present a novel approach for generating official rule-compliant serves by combining motion primitives, Model Predictive Control, and Bayesian Optimization. Serves generated in this way offer a wide and controllable variation of spins of up to 550 rad/s, and speeds of up to 6.7 m/s, matching and even surpassing those of elite table tennis players.

Robot imitation learning for manipulation should preserve demonstrated task geometry while producing dynamically admissible robot motions. Existing pipelines often learn task-dependent trajectories and impose execution limits afterward through filtering, smoothing, clipping, or time scaling, which may distort task-critical end-effector paths. We propose the Spectral Movement Primitive (SMP), a frequency-domain imitation learning framework that couples task-space skill generation with joint-space execution regulation. Demonstrations are represented by truncated finite-horizon Fourier coefficients. An empirically selected low-frequency task band captures the dominant motion geometry, while higher harmonics contribute disproportionately to derivative growth. A frame-aware context-conditioned GMM/GMR prior predicts the task-band coefficients in a canonical task frame, and the resulting Cartesian trajectory is mapped to joint space through sequential inverse kinematics. A phase-coupled regulator then limits the requested phase progression without modifying the spectral coefficients, thereby enforcing joint velocity and acceleration limits while preserving the represented path. Experiments evaluate task-band reconstruction, robustness to composite demonstration corruption, out-of-distribution cross-board generalization, joint-space dynamic admissibility, end-effector path preservation, and deployment on a Franka Panda robot. Results show compact geometric reconstruction, consistent transfer across unseen task frames, substantial reductions in dynamic violations and jerk, and preservation of the intended end-effector path during phase regulation.

Visual navigation policies built on large pretrained models have so far followed a common recipe: a dedicated visual encoder, a bespoke action head, and training on thousands of hours of cross-embodiment datasets. We ask whether this recipe is necessary. In this paper, we introduce GemNav, a visual robot navigation policy that adapts a frozen Multimodal Large Language Model (MLLM) for short-to-medium horizon waypoint navigation using Low-Rank Adaptation (LoRA) on the language tower alone, with no auxiliary visual encoder and no continuous regression head. Waypoints and categorical navigation signals share a single discrete token vocabulary generated by the language-model head, and a soft-decoded auxiliary loss recovers the metric structure that pure cross-entropy training discards. On a single 8.7-hour open corpus, roughly three orders of magnitude smaller than competing training sets, the policy transfers zero-shot to four physically distinct unseen environments and stops within 0.25-0.42m of the goal across 20 real-world trials covering an open carpark, an obstacle carpark, a long outdoor chemical yard, and an indoor warehouse. Conditioning on short image histories improves offline metrics but yields no robot benefit, pointing to a ceiling on what temporal context adds once pretrained vision features are in place. These results indicate that discrete-token adaptation of frozen MLLMs can provide a data-efficient, deployable alternative for foundation model robot navigation.

LLM-based robot planners are fluent but cannot guarantee that their plans are executable or safe. Classical PDDL planners can guarantee these properties, but only after the problem is fully specified, and they make poor use of an LLM's ability to read context and repair plans. This paper presents a neuro-symbolic framework with three parts. All LLM calls use a locally-hosted open-weight model, so the pipeline can be deployed on-robot with no cloud dependency. First, an offline procedure that mines a single global Signal Temporal Logic (STL) constraint on mobility from demonstration data. The procedure recovers codified rules (e.g., stopping at red lights, mined from nuPlan driving logs) or population preferences (e.g., social-navigation comfort, mined from SCAND teleoperation), depending on what the demonstrations encode. Because the demonstrations are a one-class signal, we generate the missing negatives with counterfactual perturbations and an LLM violation generator and then fit the constraint by evolutionary search. We use the mined constraint to shield a vision-language driving policy on Bench2Drive and two discrete-action navigation policies on HA-VLN-CE. Second, an evolutionary PDDL planner: an LLM proposes and repairs plans, programmatic validators decide which ones survive, and the validated portion of the plan grows over iterations. We test the planner on the open-world ALFWorld Text benchmark, where it beats strong baselines and stays robust when the goal vocabulary does not match the action-model vocabulary. Third, a constrained execution loop: the planner's plan is compiled into waypoints, the waypoints are checked against the mined constraint, and the planner re-plans on a violation. We illustrate the full pipeline via demonstrations using the Gazebo simulator.

Recovering real-world scenes as interactive simulation environments can enable generalizable robot learning and reproducible policy evaluation. However, constructing scenes that are both physically stable and visually faithful remains slow and expensive. In this work, we present RoboSnap, a real-to-sim framework that turns a single RGB image into a simulation-ready scene. The key idea is a layered design that separates the physics-critical interaction area from the surrounding visual context: collision-aware foreground assets are refined for stable robot interaction, while a 3D Gaussian splatting visual layer preserves faithful background appearance under novel views. Experiments on DROID scenes and real-robot tasks show that RoboSnap achieves reliable trajectory replay in the recovered scenes, supports task-specific synthetic data generation for policy training, and yields meaningful sim-real correlation for policy evaluation. To further support real-to-sim research, we introduce DROID-Sim, a real-to-sim companion dataset constructed from 564 real-world scenes in DROID. Extensive experiments suggest that the value of real-to-sim methods lies not only in high-fidelity visual reconstruction, but in turning real environments into reusable infrastructure for robot learning and evaluation.

Validation of robotic systems critically depends on the operating conditions under which they are assessed. Scenario selection and variation are often manual, experience-driven, and difficult to scale, which harms reproducibility and weakens validation conclusions. We propose a scenario-based methodology that models scenarios compositionally and formalizes how these dimensions are varied, instantiated, executed, and interpreted. Building on this, we introduce RoboVAST, a framework that realizes declarative campaign specifications, plugin-based scenario generation, and scalable containerized execution with integrated result analysis. We demonstrate the approach with a navigation dataset comprising 5480 scenario configurations and over 100000 execution runs across five indoor maps with varied paths, sensor noise, software parameters, and obstacle settings, totaling more than 1800 hours of simulated operation and 1873 km traveled. Twenty repetitions per configuration allow us to distinguish systematic failures from stochastic anomalies.

World Action Models (WAMs) provide a promising alternative to Vision-Language-Action (VLA) policies by using video-based world modeling as dense supervision for robot action learning. Existing WAMs excel at physically grounded execution, but typically lack the explicit language-level planning interface in VLM-based VLAs for decomposing coarse instructions. Such decomposition becomes important when household tasks involve complex multi-step goals, where coarse user commands need to be converted into sequences of fine-grained executable subtasks. Meanwhile, the field still lacks a fair real-robot comparison between VLA and WAM execution capabilities, since existing systems often differ in data, robot embodiments, and task protocols. To address both the decomposition gap and the need for a controlled WAM-VLA comparison, we introduce DSWAM, a Dual-System World Action Foundation Model for fine-grained robot manipulation. DSWAM keeps a System 1 WAM executor as the default control path and optionally activates a System 2 vision-language subtask planner only when task decomposition is useful. The planner predicts executable subtasks from short-term visual history and a global task prompt, while the WAM executor performs world-aware action generation for each instruction or subtask. The executor is trained with action prediction and video co-training, but inference directly predicts action chunks without explicit future video generation. To make this execution path practical on real robots, we further integrate TensorRT acceleration, asynchronous execution, and real-time chunking (RTC) so that policy queries do not block robot control. To provide a fair real-robot comparison with VLA policies, we build and evaluate DSWAM under the DeMaVLA real-world deformable manipulation setting with matched robot platform, pretraining data, post-training data, and evaluation criteria.

In heterogeneous robot swarms, caste reassignment (rebinding a robot to a new capability-bound role) is a high-frequency runtime event driven by battery, payload, and priority changes. Existing approaches treat it as an internal allocation algorithm and do not expose the reassignment to external authority. We argue that for regulated embodied deployments a caste change that elevates a robot's privilege envelope is a governance event that must be auditable and externally authorised. We propose an asymmetric-trust protocol: auto-tightening reassignments (to safer, lower-privilege castes) are admitted automatically, while bounded relaxation (to higher-privilege castes) requires an operator countersignature against a per-axis budget. Each transition carries a signed cause-chain, committed to a hash-chained Merkle audit log that an offline auditor verifies from an operator-signed identity manifest alone. We evaluate a reference implementation with real Ed25519 signatures over fleets up to 100 robots: auto-tightening completes in single-digit to low-double-digit milliseconds, and the governed protocol refuses four explicit attacks (caste laundering, repeated-relaxation escalation, operator impersonation, cause-chain forgery) by construction, with a partially-governed baseline isolating which gate stops which attack and a randomized fuzz adversary finding no admission. A distributed audit layer replicates the log across N per-member replicas with quorum-committed total order and cryptographic fork exclusion; we prove agreement and fork exclusion and validate them both in simulation and as a real multi-process deployment over TCP sockets (up to 100 real processes) with a Byzantine equivocator, on which every honest replica agrees, detects the equivocation, and commits no fork. The construction generalises a single-agent persona-mutation governance gate to swarm-level caste governance.

Diverse applications for robotics, such as industry and agriculture, require robots to operate across various embodiments, changing visual conditions, and complex planning. Vision-Language Models (VLMs) offer a promising foundation for general-purpose and interpretable robotic reasoning. Aligning VLMs with diverse robot applications requires a modular understanding of the individual decision components that underlie robotic behavior. Capturing such structure is challenging for conventional robot benchmarks that are primarily based on teleoperated, end-to-end datasets. We propose Robot Question Answering (RQA), a modular evaluation framework and RoboVista, a benchmark curated from real robotic systems, research papers, and expert annotations. RoboVista contains 474 Visual Question Answering (VQA) instances with human annotated reasoning and covers 39 unique task types in agricultural, industrial, domestic, surgical robotics, autonomous driving, and open robot datasets. Experiments on RoboVista show that state-of-the-art VLMs exhibit substantial gaps. Physical robot experiments suggest strong correlation between RoboVista performance and real-world task execution.

Recent advances in embodied AI have established robot foundation models (RFMs) as the dominant approach for generalist robotic systems to date. By leveraging imitation learning on extensive robot demonstrations, RFMs have achieved impressive capabilities in mapping visual observations and language instructions to continuous robotic actions. However, current RFMs lack an inherent ability to reason about physical dynamics and the causal effects of robot behaviors on the 3D physical world. This creates a fundamental mismatch between 2D-centric visual perception and 3D-centric embodied interaction, severely limiting the generalization ability of RFMs in real-world tasks.To address this gap, we present WSA$_1$, a novel RFM built upon proposed 3D-Centric World-Spatial-Action modeling paradigm. It not only learns 3D world-aware visual thought for future robot behaviors, but also models mutual constraints between 3D world state transitions and robotic actions to enhance behavior generalization. Notably, WSA$_1$ achieves highly data-efficient pre-training with 6k hours of expert demonstration data (only 1k hours from real robot), while delivering competitive manipulation performance (93% success rate) on RoboTwin2.0 simulation benchmark and achieving +20% average boosted performance over state-of-the-art RFMs on real-world robot control tasks. These results reveal that generalizable RFM can be attained without large-scale real robot data when paired with 3D-centric world-action joint modeling, which offers a practical and affordable pathway to generalist robotic systems.

In this study, we propose a layout-independent control allocator capable of zero-shot deployment across diverse actuator configurations. The proposed method utilizes a learning pipeline that integrates a Graph Neural Network (GNN) and a Transformer to represent the robot's geometric layout as a graph, along with a Mixture Density Network (MDN) to predict multi-modal control command distributions. Furthermore, by incorporating a differentiable physics surrogate model, we achieve command refinement during inference to minimize target wrench tracking error and energy consumption. A single generalized model using randomly generated actuator layout data demonstrated high trajectory tracking performance on different actuator layout robots outside the training distribution. Additionally, in real-world pool experiments, our approach achieved performance nearly equivalent to conventional controllers designed to specific layouts.

Evaluating embodied robot foundation models remains a critical bottleneck; unlike large language models efficiently assessed via digital benchmarks, robotic policies require slow, costly real-world rollouts limited by hardware and human supervision, which has driven interest in world models as surrogate policy evaluators, yet the key properties that make a world model reliable for policy assessment remain poorly understood. This work presents a systematic study of world models for robotic policy evaluation and introduces WMBench, a benchmark constructed from real-robot teleoperation data and matched policy rollouts covering diverse manipulation tasks to enable controlled comparisons across model families, action encodings, rollout horizons, and evaluation metrics. Using WMBench, we analyze 7 video world models, 4 action representation schemes, and over 324,000 simulated policy rollouts paired with real robot executions, further enriching our analysis with large-scale community submissions from the CVPR 2026 GigaBrain Challenge, curated synthetic trajectories, and a training videos spanning more than 12,000 hours. Our experiments deliver three core insights: evaluator quality is dominated by long-horizon, action-faithful rollout consistency rather than short-term visual realism; pretraining gains stem not only from data scale but from balancing general world knowledge with robot-specific controllability; and architectural choices including action encoding, memory design, and evaluator-focused post-training strongly determine alignment with real-world robot behavior. Drawing on these results, we derive a practical design roadmap and realize it in \textit{GigaWorld-1}, a world model specially optimized for policy evaluation, and we fully release our code, models, datasets, and toolkits to advance scalable evaluation research for embodied foundation models.

Proactive robots are increasingly deployed in public environments where people are encountered not as isolated individuals but as members of cohesive social groups. Yet whether the prevailing design paradigm in proactive human-robot interaction (HRI) accounts for the relational structure that defines a group as a social unit remains largely unexamined. Through a systematic review of 63 proactive HRI studies in group settings from 2000 to 2025, we identify a recurring tendency, the Individual-Targeting Assumption (ITA), in which robots treat co-present people as independent engagement targets. We find that ITA is present in 60.3% of the corpus, with group-aware approaches emerging almost entirely after the robot is already embedded in an ongoing interaction. Critically, how a robot should detect and negotiate entry into a pre-formed group before initiating contact remains unaddressed across the corpus. Three failure modes, engagement misdetection, social ratification blindness, and bystander neglect, emerge as recurring patterns when proactive robots interact with human groups. These findings reframe proactive HRI in group settings not as an extension of dyadic interaction but as a qualitatively distinct design problem, and they identify the robot's approach to the group during the entry phase as a critical and understudied open challenge.

This study proposes a reconfigurable rocker-bogie mechanism that achieves efficient turning motion with a small number of actuators while maintaining high step-climbing capability. By installing motors at the bogie joints and actively swinging up and down bogies, the system enables switching between four-wheel and six-wheel configurations. Omnidirectional wheels are mounted on the rear ends of the rockers, allowing smooth turning in the four-wheel configuration based on a differential-drive model. Experimental evaluation using a prototype robot demonstrated that the proposed mechanism achieves zero-radius turning at a speed more than five times that of a conventional rocker-bogie mechanism equipped with six non-steerable grip wheels, while requiring only approximately 17% of the total average wheel torque. In addition, the robot successfully climbed a 40 cm step with an average climbing time of 6.4 s, confirming its high turning and step-climbing performance.

Robot policies inevitably encounter failures when deployed in real environments. Naive retries often repeat the same mistakes, while many existing recovery methods rely on human intervention. In this paper, we propose Failure-Aware Retry (FAR), a framework that enables robots to learn from previous failures at test time, adapt their behavior accordingly, and eventually complete the task autonomously. FAR combines Failure-Contrastive Preference Adaptation, which constructs preference learning data from failures to steer the policy away from previously unsuccessful behaviors, with lightweight action perturbations during retries to encourage local exploration. We further incorporate successful recovery trajectories into a training loop for continual policy improvement. Experiments in both simulation and real-world manipulation tasks show that FAR substantially improves success rates and robustness, with average gains of 17.6% over the standard diffusion policy in simulation and 11.7% in the real world. In addition, FAR significantly improves data efficiency under both reset and timestep budgets during continual policy improvement by exploiting informative failure cases.

Robotics foundation models (RFMs) are making general-purpose robots increasingly practical for factory deployments. While RFM serving systems are central to this vision, existing systems are largely shaped by a single-robot, single-model assumption: inference is treated as an edge-computing problem handled by an on-robot or dedicated nearby GPU, and the serving objective is to minimize the latency of a single action model. In this paper, we propose ROSA, an RFM serving system for robot factories designed around three key principles. First, ROSA adopts shared GPU-pool serving, allowing a fleet of robots to access powerful server-class GPUs over the network in order to improve inference performance, battery duration, and GPU utilization. Second, ROSA provides a robotics-aware programming abstraction and system design that supports multi-model pipelines, per-task performance requirements, and failure handling. Third, ROSA uses factory-objective-driven scheduling to maximize SLO-qualified factory productivity rather than minimizing individual request latency. We implement ROSA on top of Ray Serve for distributed orchestration, with vLLM, PyTorch, and JAX as model-serving backends, and evaluate it on both real robots and synthetic large-scale workloads. The results show that ROSA improves factory productivity by up to 12.06x over conventional dedicated serving systems.

Assistive autonomous robots operating in multi-agent environments require efficient strategies to locate specific individuals among multiple residents. Current social navigation methods focus on reactive collision avoidance and trajectory adaptation, but lack mechanisms to proactively gather information through human-robot communication. We introduce Communication-enabled Social Navigation (CommNav). In this novel task, robotic agents actively seek assistance from residents to locate target individuals by requesting information about recent sightings, locations, and movements. To evaluate CommNav, we extend Habitat 3.0 to create Habitat 3.0c, a communication-enabled variant supporting multi-human environments with information exchange protocols. Adding our communication module (COMM) to a state-of-the-art social navigation model yields a 10 percentage-point improvement in Episode Success. We further investigate the transition from structured data to natural language by evaluating models trained on LLM-generated instructions and on colloquial instructions collected from a human study. Our experiments reveal that: (i) explicit human-robot communication substantially enhances multi-person navigation performance; (ii) pre-training COMM on a communication pretext task effectively addresses the challenge of occasional interaction signals; and (iii) the navigation policy is highly robust to natural, colloquial human language, achieving an episode success statistically similar to the model using perfect structured data.

Accompanying a group of humans is an essential aspect of developing human-like social cognition in robots. However, human groups typically do not follow fixed formations, which poses significant challenges for robots in maintaining natural companionship behaviors. In this paper, we propose an adaptive group-accompaniment method for social robots based on Vision-Language Models (VLMs), leveraging their semantic reasoning capabilities to infer companion positions, maintain social distances, and understand group dynamics. The members of the group are first detected, and a perceptual module generates visual representations of the interaction group space as input to the VLM, which is then combined with a Model Predictive Path Integral (MPPI) controller to ensure stability and safety. Experimental evaluations across five scenarios show that the proposed method enables robots to accompany the group effectively, demonstrating a 15% improvement in success rate and a 25% reduction in collision rate compared to baseline approaches. Additionally, a user study indicates that the generated companionship behaviors are perceived as natural and socially appropriate.

Robots deployed in unstructured outdoor environments often plan from scene reconstructions collected before deployment because operators cannot remap large or remote sites before every mission. As a result, robots must make long-horizon planning decisions using stale maps that assume the terrain remains unchanged, even though physical changes to the environment may render previously feasible routes unsafe or unreachable at execution time. We present a physically viable world model for evaluating what-if queries for robot navigation under future terrain change. The system augments reconstructed 3D Gaussian splat scenes with physics-based simulation to generate physically modified versions of the same environment without recollecting sensor data or rebuilding the map. We then implement a terrain-aware planner that accounts for physical events, obstacles, and deformations that are simulated by the world model. This allows robots and human operators to evaluate whether planned routes remain feasible before committing to a planned route, particularly in constrained environments where retreat or recovery may become impossible once conditions change. We evaluate the system on a real outdoor field site in Central Texas using simulated flooding across multiple severity levels. We measure route and mission feasibility as terrain conditions deteriorate under physically simulated interventions. Our results show that physically viable world models expose long-horizon route failures and rerouting behavior that are not apparent when planning only on the original reconstructed environment, allowing robots to evaluate how future terrain changes may affect route feasibility before deployment.

We study the symmetric bouncing of a point robot within orthogonally-joined rectangles with equal width, which we refer to as pipes. We provide an exhaustive case analysis of every trajectory pattern inside a single rectangular pipe segment, identifying the conditions under which the robot exits. We then extend the analysis to L-shaped pipes and, more generally, to linear chains of $k$ orthogonally connected pipe segments. We prove exit guarantees for the special angle $α= π/4$. Furthermore, these results extend to pipes with curved joints.

Modular reconfigurable robotic systems provide a scalable solution for cooperative surface operations in future lunar missions. However, cooperative cargo transportation remains challenging due to morphology-dependent topology changes, strong payload-induced coupling, long-horizon decision making, and safety constraints. This paper proposes a phase-decomposed reinforcement learning framework for cooperative cargo transport with distributed robotic units. The task is decomposed into lifting, transportation, and placement, each optimized with a dedicated joint-state policy capturing inter-agent coupling. Centralized training promotes stable convergence, while deployment uses onboard proprioception for control and OptiTrack motion capture for ground-truth evaluation and post-processed metrics. A deterministic phase controller expressed in Markov state representation regulates transitions between stages, and a failure-sensitive synchronization mechanism ensures coordinated progression and safety-aware halting during real-world execution. The framework is evaluated in simulation and through controlled field experiments at a JAXA space exploration test facility. Results demonstrate reliable cooperative transport across all stages in both simulation and hardware experiments.

This paper takes issue with the recent themes of both the RO-MAN and the HRI conferences for their portrayal of a future human-robot society as inevitable. The focus is on discussing how such statements ultimately shape research. By treating a future human-robot society as a fait accompli, license is given for user studies to imagine any scenario they like, no matter whether it has any ecological relevance, and to emphasise the scenario design over actually creating robot abilities needed to fullfill the imagined role. Meanwhile, research that focusses on actual societal needs, without assuming that robots are a solution, is deprioritised, as is technical development, in particular with respect to abilities that are necessary to enable robots that function as social agents rather than a mere automation of tasks. A frame that simply assumes a robot future not only detracts from scientific advancement in favour of a techno-solutionism we ought to resist, it is also self-defeating as it risks stifling the research needed to bring it about. We should therefore reject attempts to frame and promote the field in terms of the inevitable social robot and instead focus on one that facilitates advances in the field regardless of what the future holds. This paper suggests that a renewed focus on cognitive mechanisms necessary for the "I" in HRI would be a good starting point.

Generalist robot policies learn a diverse repertoire of behaviors from large-scale pretraining. In principle, this makes them excellent priors for downstream adaptation via reinforcement learning (RL). In practice, however, standard RL methods leveraging this prior optimize directly over robot actions, requiring the base policy's action distribution to be close to that of a performant policy from the start. This assumption breaks down for complex or long-horizon tasks that fall outside the pretraining distribution. Our key insight is that, for sufficiently expressive generalist policies, language prompts are an effective alternative space for learning to solve such tasks: modulating language inputs elicits skills already within the policy's repertoire, which can be composed to solve tasks beyond its zero-shot capabilities. We propose Semantic Action Reinforcement Learning (SARL), which learns to optimize this prompt space through online interaction, treating the generalist policy as a controllable skill prior. Importantly, leveraging pretrained skills rather than learning new ones from scratch yields structured, semantically meaningful exploration and highly efficient online improvement, and learning to modulate prompts through experience grounds them in induced real-world behaviors for robust task-solving. Across real-world settings and simulated benchmarks, we show SARL unlocks fundamentally new capabilities -- adapting VLA behavior to solve complex, long-horizon tasks -- and significantly outperforms existing approaches for improving robot behavior in deployment.

As humanoid robots become increasingly dynamic, coupling them with reinforcement learning offers a promising approach to solving the complex, underactuated mechanics of passive inline skating. Equipping a humanoid robot with passive inline skating wheels presents an opportunity to combine the versatile agility of humanoids with the high-speed, energy-efficient locomotion strategies utilized by human skaters. In this paper, we train and deploy a reinforcement learning control policy that enables novel locomotion strategies for a humanoid robot modified to equip consumer inline skates instead of conventional feet. Unlike previous work limited to quadrupedal robots or actively driven wheels, our system allows for precise 6-DoF control of the skates to execute dynamic, edge-driven propulsion strategies. Our skating strategies emerge entirely from our reward structure, without reliance on human motion data, imitation learning, or kinematic priors. We overcome the inherent instability of passive wheels and simulation contact artifacts by utilizing different geometric wheel models (spherical and ellipsoidal) during training and validation, along with a custom success-based command curriculum and a specialized rolling reward. Consequently, our policy demonstrates up to a 50% reduction in Cost of Transport (CoT) compared to standard walking gaits. The resulting policy successfully transfers zero-shot to the physical Booster T1 hardware. Real-world deployments demonstrate dynamic balance, the ability to reject active physical perturbations, and agile locomotion strategies capable of turning at speed. A video of our results can be found at https://www.youtube.com/watch?v=-_APcOS7uFo.

Cloud-hosted foundation models enable robots to use semantic reasoning beyond onboard computational limits. In this setting, the robot executes a currently available primitive generated by the cloud, and continued task progress requires the next cloud result before this primitive is exhausted. This execution becomes fragile under spatially heterogeneous connectivity, because the current primitive determines when the next result is needed, whereas the wireless environment determines where the next request can be submitted and where the response can be retrieved. Strategies that reduce latency or improve individual transmissions can shorten this dependency, but they do not determine a submission location that supports reliable upload and leaves a feasible opportunity for response retrieval. To address this problem, we introduce the request--response window, which characterizes the time required for the next cloud cycle, including uplink transmission, cloud inference, downlink retrieval, and inference uncertainty. Building on this window and an available communication map, the proposed framework treats the next request point as a motion decision during ongoing primitive execution, selecting it to provide sufficient communication quality for cloud request submission while preserving progress within the finite support of the current primitive. The selected request point is incorporated into a local planner, which guides the robot toward the request point before submission and then continues task execution while maintaining sufficient connectivity for retrieving the next cloud result. Experiments in an indoor wireless scenario built from measurements show that the proposed method achieves the best or tied-best task success among the compared methods, while using fewer request attempts and producing lower request failure rates.

Beryllium contamination surveys in radioactive areas are challenging for robots in environments cluttered with cables and electronics. To address this problem, we have developed a novel quadruped system augmentation: A lightweight, soft, and compliant tendon-actuated robotic tail mounted on a quadruped robot. The tail features a hollow, flexible backbone and a tendon-actuated soft gripper that enables the robot to pick up sampling tissues, swab contaminated surfaces, and release the tissues at designated collection locations for subsequent beryllium analysis. To enable intuitive teleoperation, a closed-form kinematic model and a singularity-robust task-space controller are developed. Experimental results demonstrate that gripper actuation has a negligible effect on robot shape, while common-mode tendon actuation provides an effective mechanism for stiffness modulation and preload control. Furthermore, experimental validation indicates that the proposed kinematic model provides a suitable basis for real-time task-space control. The proposed system combines the agility of legged locomotion with the compliance of soft robotic manipulation, enabling the complete contamination-survey procedure to be performed without human exposure. While motivated by beryllium contamination surveys at CERN, the proposed quadruped soft-tail concept is broadly applicable to legged robots operating in cluttered, confined, or hazardous environments where conventional rigid-link manipulators are undesirable.

Can the robot use a plate to cut a cake if no knife is available? Tool use greatly expands robot capabilities, but to use tools creatively beyond their intended functions, the robot faces the challenge of $\textit{open-world affordance grounding}$: select an open-category object to act as a tool and localize its specific region of action. To this end, we introduce GROW$^2$ (GROunding Which and Where), which leverages object parts as a natural abstraction to split the grounding process hierarchically into semantic and geometric levels, thus bypassing the need for data-heavy, end-to-end training. Semantically, GROW$^2$ harnesses the commonsense reasoning of Vision-Language Models (VLMs) to parse a natural-language task instruction, select a suitable object as the tool, and identify task-relevant parts on the tool and the target object. Geometrically, vision foundation models then ground the selected parts into precise 3D regions from a single RGB-D image. Experiments on established benchmarks show that GROW$^2$ outperforms state-of-the-art baselines on affordance prediction benchmarks. Further, it achieves zero-shot generalization over open-category objects and outperforms baselines in both simulated and real-world robot tool use experiments.

Recent progress in humanoid behavior models has been driven in large part by abundant human motion data, but comparable motion data is scarce for non-humanoid legged robots such as quadrupeds, hexapods, and quadruped manipulators. A promising alternative is to repurpose human motion across embodiments; however, direct retargeting often produces motions that are visually plausible yet physically inconsistent or difficult to track under robot dynamics. We present X-Morph, a human-motion-to-robot-behavior pipeline that converts human motion into deployable locomotion and loco-manipulation policies for diverse non-humanoid legged morphologies. A cross-morphology retargeting stage converts human motions into kinematically plausible, intent-preserving robot references, which are then tracked by a privileged RL policy and distilled into a causal student policy. We evaluate X-Morph on three morphologically distinct platforms: a quadruped, a hexapod, and a quadruped equipped with a manipulator. The resulting policies track diverse retargeted motions, generalize to unseen human motions, and support downstream use cases including video-based teleoperation, behavior-prior control, and text-conditioned motion generation. These results suggest that large-scale human motion can serve as a substrate for learning broad, reusable behavior priors beyond humanoid robots. Project page: https://maker-rat.github.io/morph/

Home robots require reliable vital signs monitoring to support long-term companionship and safety in daily environments, yet obtaining respiration and heart rate without physical contact remains challenging in unconstrained home settings. Millimeter-wave (mmWave) radar offers a promising solution due to its phase sensitivity to sub-millimeter motions. However, mmWave measurements are fundamentally constrained by observation geometry, since only the radial component of motion is observable. Consequently, arbitrary robot-human orientations often introduce angular misalignment that destabilizes vital signs estimation. To address this limitation, we reformulate vital signs monitoring from passive signal recovery to active geometric regulation. We propose ActiveVital, a vision-guided sensing framework that treats sensing geometry as an explicit control variable for robots. It localizes the chest anchor via visual keypoints and converts alignment errors into control commands. This steers the robot-mounted radar toward near-normal incidence to the thoracic surface, maximizing radial observability within a perception-action loop. A differential phase enhancement module further stabilizes signal extraction under motion. Experiments show that ActiveVital reduces respiration interval error from 0.87 s to 0.14 s and heart rate error from 13.59 bpm to 2.22 bpm, achieving accuracy comparable to controlled static sensing while remaining robust under unconstrained robot-human configurations.

This paper presents KYON, a hybrid wheel-legged quadruped robot equipped with a bimanual upper body for loco-manipulation tasks. The platform features a semi-modular design with a reconfigurable lower legs, enabling both wheeled and legged locomotion depending on the environment. A design approach that places actuators in the base and uses transmission mechanisms reduces distal inertia, improving agility and dynamic performance. The robot integrates a whole-body control framework together with a reinforcement learning based policy to handle nonlinear dynamics and enhance robustness to disturbances for the execution of locomotion and manipulation tasks, independently. Experimental results demonstrate effective dynamic locomotion and bimanual manipulation, validating the platform's capability to operate in complex and unstructured scenarios.

Existing robot policies based on learned visual embeddings lack explicit structure and are sensitive to visual distractions. Thus, the representations that drive their behaviour are often opaque, making their decision-making process difficult to interpret. To address this, we introduce Structured Image Representations (SIR), a method that leverages Scene Graphs (SGs) as an intermediate representation for robot policy learning. Our approach first constructs a fully connected graph, using image-derived features as initial node representations. Then, a module learns to sparsify this graph end-to-end, creating a task-relevant sub-graph that is passed to the action generation model. This process makes our model intrinsically explainable. Evaluations on RoboCasa show that our sparse graph policies outperform image-based baselines on average with 19.5% vs 14.81% success rate. Most importantly, we show that the learned sparse graphs are a powerful tool for model analysis. By analysing when the model's sub-graph deviates from human expectation, such as by including distractor nodes or omitting key objects, we successfully uncover dataset biases, including spurious correlations and positional biases. https://github.com/intuitive-robots/SIR_Model

Real-world evaluation is the gold standard for robot policies because it tests them against the physical conditions and deployment challenges they are ultimately designed to handle. However, real-world evaluation is also the bottleneck for iterating on robot policies: it is costly, difficult to reproduce, and often too sparse to reliably compare nearby model variants. A straightforward proxy for performance is validation loss on expert demonstrations, but this proxy is often poorly correlated with real-world performance. In this paper, we introduce Critical Interval MSE (CI-MSE), an intuitively simple yet effective offline validation metric. CI-MSE restricts error computation to task-critical segments and pairs it with simple action-alignment procedures that better match rollout-time behavior. Across simulation and real-world experiments, CI-MSE yields a stronger correlation between validation error and rollout performance than raw MSE. Across a wide range of policy checkpoints, CI-MSE achieves a Spearman's rank correlation of $-0.87$, much closer to the ideal value of $-1$ than raw MSE's $-0.61$, demonstrating a significant improvement. We show through sensitivity analysis that our metric is robust to a wide range of hyperparameters. We further study the effectiveness of CI-MSE under evaluation distribution shifts and suggest design boundaries when using this metric. In summary, this paper provides a simple and reliable offline validation tool for accelerating policy iteration. Project webpage: https://ci-mse.github.io/

Shared autonomy systems combine user input with autonomous assistance to help users with motor impairments control robot arms to perform everyday manipulation tasks, by inferring user goals and providing appropriate guidance. However, the robot's internal beliefs about user goals cannot be observed by users. Traditional shared autonomy systems provide assistance along efficient shortest paths toward inferred goals, but when multiple objects lie in similar directions, such assistive motion remains ambiguous and fails to reveal the specific goal identified by the robot. This creates two critical problems. First, when the robot correctly infers the goal, users continue controlling because they cannot perceive understanding from ambiguous assistive motion, wasting effort when autonomous completion would suffice. Second, when the robot misunderstands intent, users cannot quickly detect errors until assistive motion diverges significantly, requiring substantial corrective input. We address this by introducing legible motion into shared autonomy, where robot actions must both advance toward the goal and clearly reveal which goal has been inferred, enabling users to understand the robot's beliefs and adjust control accordingly. The robot modulates communication strength through confidence-aware adaptive authority allocation by providing assertive legible assistive actions when confident while increasing user authority when uncertain, transforming shared autonomy into transparent bidirectional collaboration. User studies including simulation, and physical experiments with a six-degree-of-freedom robot arm demonstrate that legible shared autonomy significantly improves users' understanding of robot beliefs and reduces user control effort compared to standard shared autonomy.

Real-world robot learning increasingly relies on heterogeneous data, but demonstrations and rollouts often mix useful progress with stalls, corrections, and suboptimal behavior. Effective policy learning therefore requires frame-level advantages that distinguish reliable local progress from failures and regressions. We propose Self-supervised Temporal Ensemble Advantage Modeling (STEAM), a label-free method that learns such advantages from expert demonstrations. STEAM trains an ensemble of temporal-offset predictors on frame pairs within expert trajectories, using the normalized temporal offset between two frames as a self-supervised signal. Each predictor maps a frame pair to a distribution over temporal offsets, which is converted into a scalar advantage. STEAM then takes the minimum advantage across the ensemble to score mixed-quality rollout data conservatively. Across real-world bimanual towel folding, chip checkout, cola restocking, and single-arm pick-and-place tasks, STEAM identifies stalls, failures, and recoveries. When combined with CFGRL, STEAM further improves policy success rate by 59%, 54.3%, 23% and 16.2% over baselines, respectively.

We present RIPA, the first systematic multi-channel empirical study of prompt injection attacks delivered through the sensory pipeline of a ROS 2-based LLM-controlled robotic system. Across 100 independent runs per injection variant on five LLMs spanning four model families and parameter scales from approximately 4B to approximately 284B (DeepSeek-V4-Flash, Llama-3-8B-Instruct-Lite, Llama-3.3-70B-Instruct-Turbo, Qwen 2.5-7B-Instruct-Turbo, Gemma-3n-E4B), we identify model-specific vulnerability profiles that do not follow a monotonic scaling trend: Llama-3.3-70B-Instruct-Turbo exhibits 100% attack success rate (ASR) across all injection variants, while Llama-3-8B-Instruct-Lite and Qwen 2.5-7B-Instruct-Turbo resist direct-override injection (0% ASR), and the smallest model evaluated (Gemma-3n-E4B, approximately 4B) matches the 70B model's vulnerability profile, indicating that robustness is model-specific rather than scale-dependent. We propose a hybrid semantic firewall that achieves 0% ASR against known injection patterns with no false positives on a preliminary benign set (0/20 commands) but exhibits a 10.2% trial-weighted bypass rate (58/570 trials; N equals 30 per payload across 19 obfuscation payloads) against adversarially obfuscated attacks, exposing a critical gap between rule-based and semantic defense layers. We further introduce three sensory injection channels: visual (Channel 1, via OCR), audio (Channel 2, via Whisper STT), and LiDAR sensor context poisoning (Channel 3). We show that Channel 3, which injects fabricated obstacle data into the robot environment-state representation at the LLM system-prompt level, achieves 100% ASR across all variants on DeepSeek-V4-Flash. We also contribute a firewall bypass taxonomy spanning 19 obfuscation payloads across five categories. All code, data, and results are publicly available.

Physical caregiving robots need to assist different users with different tasks in diverse environments, and they come in many embodiments. While substantial progress has been made on individual caregiving tasks, most existing systems remain tightly coupled to specific environments and robot embodiments, and often do not explicitly model or constrain interactions around people, despite humans being special agents in the environment. This motivates a focus on adapting to context that emerges from the joint interaction between the environment and the robot's embodiment. We propose $E^2$-CARE, a framework that enables context-aware adaptation by representing primitive caregiving skills as interaction templates whose execution is reshaped online. $E^2$-CARE represents the environment, the robot, and the human within a unified 3D dynamic scene graph that models these interaction contexts explicitly, and synthesizes task-specific constraints to govern how each skill is executed. By enforcing these constraints at runtime, the same skill templates can be reused zero-shot and safely across diverse environments and robot embodiments. We evaluate $E^2$-CARE across four activities of daily living in hundreds of simulated household environments, including assistive home settings, and across diverse robot embodiments, and validate it through user studies on two caregiving tasks with two robots in various real-world environments. Results demonstrate consistent and successful adaptation across these environments and embodiments. Website: https://emprise.cs.cornell.edu/e2care

Nowadays mobile robots have wide engineering applications. Simultaneous localization and mapping (SLAM) is an important task of these robots. The major and common algorithms used for this task are based on extended Kalman filter (EKF). One of the main problems in EKF-based SLAM is its divergence. The nonlinearity of motion and observation models and linearization error are the main reasons for the divergence. There have been some efforts to address this problem with limited success. In this paper, by applying a simple compass and using an effective transformation, we transform the non-linear state space model into a linear model. Then, by applying the original KF to this model, we reach a new method, which is called LMKF SLAM. We show that the LMKF SLAM is significantly superior to the state-of-the-art methods, especially EKF-based SLAMs, both in accuracy, convergence, and computational complexity. The proposed method is also more stable with respect to the uncertainty of sensors values and changes in system parameters. Experimental results verify these points.

We study whether we can learn novel manipulation skills from human actions to a bi-manual robot with parallel grippers. Human action data is cheap, abundant, and diverse, making it one of the most promising resources for scaling up robot learning. Yet transferring skills from humans to robots remains hard: most prior work treats humans as just another bi-manual 6DoF embodiment, where hand-pose estimates are noisy and the contact patterns of human fingers differ fundamentally from those of a parallel gripper. We argue that learning rotation-inclusive action signals from human data is therefore sub-optimal, and instead propose a bridging action representation: the relative wrist translation within the initial head-camera frame, an action space shared by humans and robots. To handle the potential absence of certain action components in different embodiments, we build a $π_0$-like vision-language-action model with interleaved action tokens and attention masking. On a suite of novel bi-manual manipulation tasks, our bridging action transfers human manipulation knowledge to robots far more effectively than noisy 6DoF human actions and scales with the amount of human data.

Dexterous manipulation depends on contact events that are fast, local, and often visually occluded. Piezoelectric microphones offer a compact and high-bandwidth way to sense these interactions, but the resulting vibro-acoustic signals are difficult to simulate faithfully enough for end-to-end sim-to-real policy learning on dexterous robot hands. We propose VibeAct, a framework that bridges real vibrotactile sensing and simulation-based reinforcement learning through a shared physical representation of contact and slip. In the real world, we embed piezoelectric microphones into a dexterous robot hand and collect vibro-acoustic data through teleoperation, then replay the recordings in a calibrated digital clone to automatically label per-finger contact and slip. A tactile estimator learns to predict contact and slip from real microphone waveforms, while manipulation policies are trained in simulation on the same representation computed directly from simulated contacts. This decoupling lets policies exploit rapid tactile feedback without simulating raw audio. Across five contact-rich tasks spanning regrasping, in-hand reorientation, and insertion, VibeAct consistently outperforms a proprioception-and-point-cloud baseline in simulation, with the largest gains on tasks requiring sustained reactive control, where the continuous slip-magnitude channel proves the most informative observation. The learned policies transfer to a physical dexterous hand-arm platform, improving success rates on deployed tasks. Project videos and additional details are at https://vibeact.github.io/.

We present OctoSense, an open-source sensor platform with stereo RGB and event cameras, LiDAR, a thermal camera, an inertial measurement unit, RTK-corrected global positioning system, and proprioception (CAN bus data from a car, and joint angles for a quadruped robot). The eponymous OctoSense dataset contains 59 hours of time-synchronized driving data across different types of environments at different times of the day, including situations with highly degraded sensors. We demonstrate multi-modal self-supervised learning using such real-world robotics data, where sensors have different representations, frequencies, latencies and noise. Our approach, a "late-fusion" masked autoencoder, (i) uses modality-specific tokenizers to account for different spatiotemporal characteristics of these sensors, and (ii) caches modality-specific tokens at inference time to process new measurements as they come. This architecture (i) is fast (6.68 ms and 112 ms on NVIDIA 5090 and Orin NX respectively, to compute the representation), (ii) performs better than existing image-only foundation models on tasks such as estimation of optical flow, depth, semantic segmentation, and ego-motion (translation, rotation, and steering angle), and (iii) predicts robustly at nighttime or in situations where sensory data is degraded. See our project page for links to the dataset, code, and supplementary videos: https://abisulco.com/octosense/.

Humanoid motion imitation requires not only accurate perception of human kinematics but also faithful reproduction of physical interactions with the environment. However, existing pipelines rely primarily on vision-based motion capture and kinematic imitation, largely ignoring contact dynamics, leading to artifacts such as foot sliding, floor penetration, and unstable behaviors. In this work, we revisit humanoid motion imitation from the perspective of physical grounding and leverage pressure as a unified modality across perception and control. We present PressMimic, a framework that integrates pressure into the full pipeline from motion capture to humanoid control. In the perception stage, we introduce FRAPPE++, a multimodal model that fuses RGB and pressure to jointly estimate 3D pose and global motion, where pressure provides explicit contact and support constraints to resolve ambiguity in vision-based estimation. In the control stage, we propose a pressure-supervised policy (PSP) that incorporates pressure-derived signals into reinforcement learning, enabling physically consistent contact patterns during execution. We further construct MotionPRO, a large-scale dataset with synchronized RGB, pressure, and motion capture data. Experiments show that pressure improves motion estimation accuracy, trajectory consistency, and execution stability. These results demonstrate that pressure serves as an effective physical grounding signal, bridging perception and control for physically consistent humanoid motion imitation.

This paper focuses on the hardware specifications required for a table tennis robot to beat professional players. After analyzing the motions of elite players, we defined target specifications for the workspace, payload, external-force resistance, physical performance, serve capability, and end-effector accuracy. Based on these specifications, we developed "Ace", a custom 8-DoF robot. The mechanical structure was improved through topology optimization to minimize mass while preserving stiffness. Motor and gearbox selection was optimized using an inverse-dynamics torque model. Low-order per-joint dynamics models with delay compensation were identified and integrated into simulation to enable the use of an RL control policy. Experiments demonstrated repeated full-stroke swings with a cycle time of 0.8 s and a peak racket-center velocity of 22 m/s. The robot successfully defeated multiple professional players.

A central challenge in deploying learned robot policies is inference-time behavior steering: redirecting a policy at test time to satisfy user preferences not anticipated during training, without retraining. Existing methods fail in two modes: end-to-end methods require fine-tuning or expert-level guidance, while neuro-symbolic methods rely on predefined symbols whose edits can result in logically reasonable but physically infeasible plans. To address this challenge, we propose ReStruct, which builds upon a neural automaton policy that decomposes a visuomotor policy into a high-level state-machine skeleton capturing task structure and a low-level continuous controller represented as a residual policy. Specifically, ReStruct adopts the automaton to represent the preference and incorporates it into the skeleton through a synchronous product, thereby reconfiguring the task structure. With the controller kept frozen, the action priors provided by the skeleton are updated accordingly to enable physically-aware control under a modified task structure. Extensive experiments from simulation and real-world show that ReStruct steers a wide range of preferences, from object-centric specifications to temporal-logic constraints, and after steering surpasses existing methods, exceeding VLA models in both task success and preference-following by up to 25%.

Humanoid robots could take on physically demanding, hazardous, and repetitive work in spaces built for humans. However, a useful robot for these spaces must coordinate locomotion, whole body motion, perception, contact, and operator supervision. This thesis presents a robot-local, runtime-editable behavior authoring and runtime system. Our system strives to be maximally observable, predictable, and directable following Coactive Design principles developed during the DARPA Robotics Challenge. Our operator interface remains continuously synchronized to the robot for runtime authoring, monitoring, and repair. Our behavior architecture uniquely combines object-centric Affordance Templates, organization and logic inspired by Behavior Trees, and runtime-editable perception through a behavior scene and primitive scene actions. Action primitives build on a whole-body controller that supports moving the arms while walking, and use a concurrent action layering algorithm for speed. The behavior library developed during this work covers more than twenty real-robot task variants, including push and pull doors with knob, push-bar, and lever-handle mechanisms, multi-step exploration sequences, obstacle clearing, and reactive table-to-table manipulation tasks. This behavior system has been deployed on many humanoid robots, such as Boston Dynamics' DRC Atlas, NASA's Valkyrie, IHMC and Boardwalk Robotics' Nadia, Unitree's H1-2, and IHMC's Alex. We evaluate our system across capability, speed, reliability, and speed of behavior creation, adaptation, extension, and combination. Our experiments demonstrate that we can adapt, extend, and combine existing behaviors to create novel loco-manipulation behaviors in minutes or hours. Videos: https://www.youtube.com/playlist?list=PLJK5CTyotYqsfgfnXb-09YNFeBose6uEY.