Category-Level Object Pose Estimation

Recovering the relative 6-DoF pose between two image groups underlies cross-sequence relocalization and multi-camera rig odometry. Each group carries known intra-group geometry from visual odometry or rig calibration, and pretrained multi-view backbones already fuse such geometry into visual features. Yet current models treat all views as an unstructured set, leaving cross-group reasoning as the missing piece. We introduce G2G, which keeps the foundation model entirely frozen and adds three lightweight trainable modules to bridge the two groups: a perceiver resampler, a cross-group bridge with merged self-attention, and a multi-frame pose head. The trainable footprint totals about 32M parameters, under 6% of the full model, and is supervised only by relative poses. Across four datasets that span indoor and outdoor simulation, real-world cross-season capture, and zero-shot sim-to-real transfer, G2G attains state-of-the-art accuracy on both tasks, while trainable baselines are retrained with their original supervision. Code and visualizations: https://github.com/WeiYuFei0217/G2G.

We are surrounded by various objects with movable, articulated parts, e.g., box, handle, door. An accurate and generalizable perception of articulated parts is essential to enhance robotic manipulation capabilities. Building on this need, recent efforts in articulated parts perception have followed two main directions: One line of work uses pose-based representation, which requires high manual cost; in parallel, affordance-based methods extract future object motion from point tracking without additional manual efforts, but suffer from low-quality data. In this paper, we propose a new representation of articulated parts, Geometric Primary Structure (GPS), an abstraction of the part geometry structure to balance scalability and quality. For efficient and scalable data collection, GPS is integrated with a portable Virtual Reality (VR) device and requires only one minute to annotate one object sequence. This direct human annotation provides higher quality than the estimated affordance. With this efficient VR-GPS system, we collect 41K frames for 234 objects across six part classes, and train a generalizable GPS model with a single RGB-D object image as input. For object manipulation, we deploy a heuristic policy based on GPS prediction. Without any in-domain fine-tuning, our method achieves an 73% success rate, covering 270 initial states for 9 objects. Our code, data and reusable tool are available at https://enlighten0707.github.io/gps.

Recovering 3D human poses for multiple individuals from different camera views is a fundamental bottleneck for analyzing interacting behaviors. Existing self-supervised approaches leverage synthetic catalogues of 3D poses; however, this leads to poor generalization in real-world scenarios due to distribution shifts. We therefore introduce DisPOSE, a self-supervised framework that approximates the inherently discrete multi-view person-assignment problem as a generative diffusion process over the space of polystochastic tensors. By employing differentiable Sinkhorn projections during denoising, our model learns to guide solutions toward valid and feasible assignments based on 2D image priors. The complete 3D skeletons of localized individuals are then regressed using a Hypergraph-Convolutional Decoder that explicitly models relational structures and articulated joints across multiple views. The proposed approach outperforms current state-of-the-art self-supervised methods on standard datasets and demonstrates strong performance on a newly proposed benchmark featuring highly occluded scenes from surgical operating rooms. Our diffusion-based localization demonstrates high label efficiency, retaining 99% of its performance with only 10% of the pseudo-labels. Notably, disentangling the assignment and root regression components while maintaining differentiability makes DisPOSE nearly agnostic to different camera arrangements.

Human pose estimation (HPE) utilizing wireless WiFi signals has emerged as a promising technology owing to its device-free nature, privacy preservation, and robustness against occlusion and poor lighting. However, existing methods often overlook the physical complex phase information of WiFi signals and fail to generalize across diverse environments due to severe domain shifts. In this paper, we present C-MambaPose, a physics-informed complex-valued Mamba-GraFormer hybrid framework for robust cross-environment WiFi-based 3D HPE. Our framework first sanitizes raw WiFi Channel State Information (CSI) phase errors and constructs a phase-preserving complex-valued representation. We then employ a Spatiotemporal Complex Mamba encoder with a dynamic selective receptive field to capture fine-grained phase dynamics. A cross-attention joint-query mapper maps the unstructured sequence tokens to human joints, which are decoded by a Graph Convolutional Network (GCN) to predict anatomically coherent 3D coordinates. Extensive evaluations on the MM-Fi dataset show that C-MambaPose achieves competitive or superior performance to state-of-the-art baselines across all settings, setting a new state-of-the-art specifically on the challenging cross-environment split, requiring only 3.78 M parameters-an 83.1% reduction compared to GraphPose-Fi~\cite{chen2026graph} and an 85.7% reduction compared to MetaFi++\cite{zhou2023metafi++}, while maintaining a comparable size to DT-Pose\cite{chen2025towards} (which is only 18% smaller) but achieving significantly superior performance without requiring any pretraining. Our code is publicly available at https://github.com/phucngvinuni/cmampose.git.

In this paper, we propose a cross-view fusion framework that enhances the robustness of 6-DoF grasp pose estimation in corner views. Our framework alleviates occlusion by incorporating an auxiliary view and avoids the time-consuming, task-agnostic multi-view reconstruction through a post-fusion strategy. To enhance cross-view fusion, we propose a self-supervised contrastive learning strategy that leverages cross-view associations to regularize point cloud features. In brief, a cross-view point pair is considered a match if the two points correspond to the same 3D location, and a non-match if they represent distinct grasp directions. The learning strategy significantly enhances the spatial consistency and direction distinctiveness of point features, thereby facilitating cross-view fusion and improving estimation robustness. Furthermore, we propose a cross-view-aligned cylinder integration module to fuse grasp-relevant geometry into a comprehensive representation. Specifically, the module first aligns the cross-view points and features according to their similarity to enhance the robustness against noise. Subsequently, these points are registered into the cylindrical coordinate frame, emphasizing the rotation-symmetric geometry which is important for grasping. Finally, local self-attention and seed cross-attention layers are alternately employed, respectively enabling interactions within single views and across views, which supports fine-grained representation of grasp-relevant geometry. Our framework achieves strong performance on the GraspNet-1Billion benchmark and in real-world applications. Code is available at https://github.com/KJZhuAutomatic/Cross-view-Grasp.

Objective: To develop and externally test a video-based framework for simultaneous detection of hyperkinetic MDs phenomenologies: dystonia, tremor, myoclonus, chorea, athetosis, ballismus, stereotypies, and tics using routine clinical recordings, with explicit testing of external, cross-cohort transfer from adult to pediatric populations. Methods: In this proof-of-concept study, the framework combines markerless pose estimation, kinematic descriptors, and a pretrained fondation model. A shared predictive backbone was developed on 21 adults with confirmed hyperkinetic MDs and 4 healthy controls assessed under a standardized protocol. External validation was performed on an independent external cohort: a real-world pediatric sample (n=12, monogenic combined MDs). For the external dataset, the backbone was deployed without retraining; lightweight calibration adjusted only the final subject-level decision step using a small labeled subset of patients selected by clinicians as representative of the cohort's phenotypic range. Results: After local calibration of the decision layer on the clinician-selected subset, performance improved consistently on the held-out pediatric patients (n=7): Hamming accuracy rose from 0.804 to 0.839 and the Jaccard index from 0.548 to 0.633. This calibrated performance was preserved, and the Jaccard index further improved, when the evaluation was restricted to the phenomenologies with more definite clinician agreement (Hamming accuracy 0.9, Jaccard index 0.786), indicating that the gains did not rest on the least-reliable labels.

Object insertion aims to seamlessly composite a reference object into a specified region of a background image. Recent diffusion-based methods achieve high visual quality but formulate insertion as a simple 2D inpainting task, providing no explicit control over the object's 3D pose and limiting their practical applicability. We propose DIRECT (Decomposed Injection for Reference Composition and Target-integration), a novel framework that integrates interactive pose manipulation with high-fidelity 2D image synthesis to enable pose-controllable object insertion. Our method decomposes the insertion conditions into three complementary components: appearance guidance capturing visual details from the reference object, geometry guidance derived from the user-adjusted 3D proxy, and context guidance from the target background. By injecting them through separate pathways, DIRECT avoids feature entanglement and simultaneously preserves reference appearance, follows the user-specified pose, and adapts the object to the target scene. We also introduce an automated data construction pipeline to improve the diversity and quality of training data. Experiments show that DIRECT outperforms previous methods in both geometric controllability and visual quality.

Robotic manipulation of textiles remains challenging because continuous deformation and self-occlusions hinder the robust visual perception required to estimate the cloth's state. To address the lack of annotated real-world data, we developed a Blender-based synthetic pipeline exporting auto-annotated keypoints, and combined manually labeled renders with real-world data to train a wrinkle detector. We present a perception framework integrating a CNN for permutation-invariant keypoint detection and a YOLOv8-OpenCV pipeline to extract grasping points from structural wrinkles. A proposed bimanual algorithm uses this system to stretch fully folded garments via wrinkles, transitioning to keypoint-based ironing once corners emerge. The keypoint model achieves a Mean Position Error (MPE) of 1.7615 pixels. The perception system transfers to physical fabrics without fine-tuning, outperforming baselines that fail in high-occlusion states or yield false positives on severe folds.

Measuring the angle between bone structures is a routine task in medical image analysis and provides a key quantitative parameter for diagnosis and treatment planning. Automated methods can reduce time and cost while improving reproducibility. In this work, we address automatic bone pose estimation using a learning-based point candidate proposal followed by a line model to extract axis parameters. Since conventional line models such as least squares are sensitive to outliers, we incorporate false-positive reduction strategies and robust fitting techniques, such as RANSAC and Hough transforms, to improve robustness. We evaluate our method on three clinically relevant paediatric angle estimation tasks: fracture fragment assessment in radiographs and ultrasound and developmental dysplasia of the hip evaluation in ultrasound using the Graf method. Our approach achieves mean errors of $4.1^\circ$, $5.4^\circ$, and $5.51^\circ$, respectively, not only remaining within the expected clinical observer variability, but also significantly outperforming landmark-based methods. Our code and annotations for fracture angle assessment in radiographs are publicly available on GitHub.

High-quality dynamic human pose annotation equips AI with precise motion kinematics to enable human behavior mastery, yet remains labor-intensive and time-consuming. Current annotation tools either lack temporal correction propagation or fail in multi-person scenarios, necessitating excessive manual intervention. In this paper, we introduce IMPose, an interactive tool for multi-person dynamic pose annotation. It features a dual-level tracking mechanism that propagates one-frame multi-person pose corrections from annotators across entire videos. The keypoint-level ensures corrections temporal propagation via sequential modeling, while the instance-level employs keypoint-aware embedding with relative positional encoding to maintain multi-person cross-frame consistency. To further improve robustness, IMPose maintains historical pose and instance cues in a trajectory bank, which enhances long-range temporal association and stabilizes annotation in challenging cases such as occlusion and motion blur. By converting sparse human corrections into dense and coherent pose trajectories, our framework significantly reduces repeated manual refinement across frames. Extensive experiments show that IMPose consistently achieves a strong accuracy efficiency trade off under different interaction budgets, demonstrating particular advantages in low click annotation settings. IMPose achieves high precision annotation with high efficiency, requiring only 27 clicks per 1,050 frame video on 3DPW and 3 clicks per tracklet per 84-frame on PoseTrack21. We further expand PoseTrack21 with 188K pose instances (3.55M keypoints) at a minimal cost of 10 annotators in 10 hours. The annotation tool, codes, and extended dataset will be open-sourced.

Concept bottleneck models (CBMs) predict a layer of human-named attributes before predicting a class, which makes their decisions auditable. On fine-grained recognition tasks the concept heads are usually free to attend anywhere in the image, so a head named for one body region can be satisfied by evidence on another. This work studies a part-factorized CBM that removes that freedom by construction. The method has three components built on a frozen DINOv3 vision transformer. A learned foreground gate, trained on DINOv3 patch features, suppresses background patches inside the part attention. A set of part queries cross-attends to patch features and each of the 312 CUB attributes is routed, through a fixed concept-to-part map, to read only from the part token its name implies. A learnable two-dimensional Gaussian prior, injected additively in log space into the attention logits, breaks the permutation symmetry among part queries; its means are initialized from the dataset-average keypoint location of each part, which requires no per-image keypoint supervision at training or test time. On CUB-200-2011 the spatial-prior model matches a fully supervised baseline (88.85% versus 88.95% top-1) while raising pointing accuracy by 16 points (52.6% versus 36.4%). Replacing bounding-box supervision with a PCA foreground target and combining it with the Gaussian prior removes all per-image supervision and reaches 88.6% top-1 at about 70% pointing accuracy. A keypoint-fraction sweep shows that 0.5% of the training set (about 27 images) suffices to initialize the prior with no measurable loss. Removing part identity entirely is the harder case: without any spatial prior, pointing accuracy collapses to $2.9\%$.

LiDAR odometry is a fundamental component of autonomous robotic systems, relying on geometric registration between consecutive point clouds to estimate ego-motion. However, traditional geometric approaches often degrade in dynamic or unstructured environments due to unreliable correspondences caused by moving objects, sparse geometric features, vegetation, and semantically ambiguous structures. Existing works have shown that, some of these limitations can be addressed by introducing semantic information from the environment in the registration process. In this work, we build on this, and show that not all elements in the environment are equally relevant for registration. Hence, we propose a semantic class-weighted ICP for LiDAR odometry. Instead of strictly filtering out points belonging to specific semantic classes, the proposed approach weights the residuals of points belonging to semantic categories based on their expected geometric stability. This strategy enables informative but potentially unstable structures, to contribute to the registration process while mitigating the influence of dynamic objects. The experimental evaluation was conducted on the SemanticKITTI and RELLIS-3D datasets, which include urban, highway, rural, and off-road environments. The empirical results show that the proposed Semantic-weighted ICP improves pose estimation, especially in challenging off-road scenarios where conventional rigid features are scarce. Furthermore, the analysis reveals that the effectiveness of this weighting strategy is highly environment-dependent, influenced by the structural and semantic composition of the scene.

Object pose estimation is a fundamental problem for an agent system to perceive or manipulate objects in images or videos. However, current instance-level methods struggle with generalization to unseen objects. Category-level methods seek to address this, but remain constrained by the complexities of learning in the non-linear Sim(3) space and intra-class variations. To address these challenges, We propose an effective method for category-level object pose estimation with two key innovations: (1) A translation/size estimator, featuring a semantic-guided symmetry-aware module that leverages robust generalization capabilities of a large vision model (LVM) to infer symmetry points, resulting in accurate translation and size without shape priors. This result serves as a precomputed cue for rotation estimation, thereby reducing the difficulty of learning in the non-linear Sim(3) space and laying a robust foundation for tackling the inherently more challenging rotation estimation. (2) A feature fusion module, based on our proposed spherical large-kernel inception convolution, fuses semantic features from the LVM with systematically computed geometric features to extract essential pose features from intra-class variations by modeling long-range dependencies without excessive computational cost. Built on these innovations, we achieve SOTA on benchmarks and real-world scenes, while developing a robust robotic picking system capable of handling diverse objects. Our code will be available at the project page: {\hypersetup{urlcolor=blue}https://panfei-cheng.github.io/SSH-Pose}.

Existing methods for category-level object articulation from a single 3D observation often rely on dense supervision, multi-frame inputs, or CAD templates, and still struggle to disentangle geometry from articulation or to recover explicit joint parameters. We propose SCAPO, a self-supervised framework that estimates canonical geometry, rigid part segmentation, and joint pivots, axes, and articulation states from a single RGB-D observation without ground-truth labels or category-specific models. Our SCAPO first uses an SE(3)-equivariant vector-neuron autoencoder to factor out global pose and align diverse instances into a shared canonical space. On this aligned shape, a joint-aware blend-skinning module is then designed to model part motion. We learn this representation through cycle reconstruction between observed and canonical shapes and cross-space alignment with a learnable canonical template that decouples shared category geometry from instance-specific residual shape. Experiments on synthetic and real articulated-object datasets show that our SCAPO recovers consistent part structure and accurate articulation parameters and outperforms all self-supervised baselines.

Orientation-aware manipulation is essential in post-harvest agricultural processing, where produce must be grasped and placed in consistent configurations. This paper presents ROG-Grasp, a geometry-based robotic grasping and placement framework that estimates the produce orientation from root surface geometry using RGB-D perception. A YOLO-based root detector and point cloud plane fitting are used to infer the root normal, enabling stable grasp pose generation and orientation-constrained Cartesian motion planning. Experiments on tomatoes and onions demonstrate high success rates and stable execution time in both isolated and cluttered scenarios. Compared with vision-language-action (VLA) policies, the proposed method achieves more reliable and accurate grasp completion with faster execution. These results highlight the effectiveness of geometry-driven perception for practical orientation-controlled manipulation tasks. A video of our paper is available online https://youtu.be/Ir2UtGODdMo.

We present our approach to the FIFA Skeletal Tracking Challenge 2026, which requires estimating 3D world-space poses of soccer players from broadcast video. Our method finetunes SMPLest-X (ViT-H, 687 M parameters) via a stratified clip split, multi-task depth supervision, and broadcast augmentation, paired with a RAFT dense optical flow camera tracker, foot-plane anchoring, and two-pass temporal smoothing. Against the FIFA baseline score of 1.053 on the validation set, SMART achieves 0.647, a 38.6% improvement; on the held-out test set, SMART scores 0.593 (Global MPJPE: 0.324 m, Local MPJPE: 0.054 m).

Robotics manipulation usually assumes that the shape and pose of the object are known to the robot prior to motion planning. However, precise geometric information is not always available in practice, and pose inference suffers from sensor uncertainties and view occlusion. In this work, we propose a unified model-based geometric framework integrating robotic haptic perception, modeling, and manipulation planning. Our novelties involve: \textit{i)} Introducing Bayesian Optimization (BO) to guide the haptic exploration for object shape inference, where superellipses are used to approximate geometric boundary; \textit{ii)} Adaptive formulation of manipulation potential encoding object geometry for quasi-static robot-object interaction; \textit{iii)} Proposing an online Ordinary Differential Equation (ODE) for real-time pose inference based on model prediction and tactile feedback. We deploy our system on a 2D robotic sorting task, and vary object geometries to validate the robustness and generalizability of our framework in both simulation and a real-world multi-arm setup.

Monocular 6-DoF spacecraft pose estimation methods predominantly process individual frames, discarding the temporal information present in an image sequence acquired during spacecraft manoeuvres. Few temporal approaches require full backbone fine-tuning or auxiliary optical flow networks, risking catastrophic forgetting or increasing computational cost, respectively. We propose TALON (Token-Aligned Lightweight adapters for Orbital Navigation): spatiotemporal 3D adapters injected before the self-attention layers of a frozen ViT vision transformer, combined with a patch-token alignment loss that geometrically grounds the adapted features to keypoint structure through a prototype-conditioned KL-divergence objective. Pre-attention placement allows the frozen attention to reason over temporally enriched tokens, achieving stronger performance with a single adapter per block than post-attention alternatives. The alignment loss shapes the intermediate representations so that each keypoint induces a spatially precise activation in the token field, while the framework adds less than 5% parameters to the frozen backbone. On SPADES dataset, TALON reduces the pose error by 50% over the prior state-of-the-art, and on SwissCube dataset it surpasses the prior best by 21.8% in ADD-0.1d accuracy. Zero-shot cross-domain evaluation from sim-to-real on SPARK real data reduces pose error by 4.7x, and ablations characterise the role of adapter depth across in-domain and cross-domain settings.

Vision-Language-Action (VLA) models have shown promise for robotic manipulation, yet most existing policies operate reactively by directly regressing actions from current observations, without explicitly modeling future dynamics. This limits their ability to generalize under out-of-distribution perturbations. To address this issue, we propose ELAN4D, an embodiment-centric, 4D-aware training framework that enhances VLA policies with future robot keypoint tracks as predictive spatio-temporal supervision. Using only forward kinematics from proprioceptive states, we derive 3D displacement tracks of robot keypoints, such as joints and the end-effector, with negligible preprocess cost. These tracks provide metric and compact supervision without requiring external trackers or reconstruction. A plug-and-play auxiliary branch with a lightweight track decoder injects this 4D signal into the action expert while preserving the pretrained vision-language backbone through gradient isolation. The track decoder is discarded during inference, leaving the base policy interface unchanged. Extensive experiments on LIBERO, LIBERO-Plus, RoboTwin2.0 and real-world manipulation tasks demonstrate that ELAN4D consistently improves over strong VLA baselines, achieving the best overall performance and substantial gains under out-of-distribution perturbations, including camera, background, and layout shifts. These results highlight the effectiveness of embodiment-centric 4D supervision for building more robust and generalizable manipulation policies.

Multi-view multi-person 3D pose estimation in team sports scenarios remains challenging due to player occlusions, appearance similarity caused by team uniforms, and the scarcity of annotated multi-view data, all of which limit the effectiveness and generalization capability of learning-based methods. In contrast, the performance of training-free approaches is inherently constrained by the accuracy of 2D keypoint detection and the robustness of cross-view association. To address these challenges, we propose Mesh-Aware Epipolar Matching (MAEM), a training-free framework for multi-view multi-person 3D pose estimation. Our method employs a monocular 3D human mesh recovery model as the frontend and introduces a two-stage epipolar matching strategy based on the recovered mesh outputs. Specifically, the proposed framework combines disjoint-set-union-based clustering with per-joint triangulation to achieve robust cross-view association and accurate 3D pose reconstruction. Experiments on two public multi-view basketball datasets demonstrate that MAEM consistently outperforms existing training-free association baselines while achieving competitive RGB-only performance in both indoor and outdoor basketball scenarios. MAEM achieves MPJPE/PA-MPJPE scores of 59.8/40.7 mm on SportCenter EPFL and 74.0/51.8 mm on Human-M3 Basketball, highlighting the effectiveness of dense mesh geometry for cross-view association without requiring target-domain training or fine-tuning.

Estimating the 9D pose of everyday objects from a single real-world image remains challenging. This is largely due to the lack of large-scale supervision. Most existing datasets either rely heavily on synthetic renderings or provide limited coverage of real-world objects: the largest real-world 9D pose dataset to date contains only 17K annotated objects across 9 categories. We address this gap with Every9D-21M, a dataset of 9D pose annotations for 21.8M real-world images from 109K object- centric videos spanning 700 everyday object categories - two orders of magnitude larger than prior real-world 9D pose benchmarks in both image and category count. To achieve this scale, we leverage object-centric videos by reconstructing object- level point clouds via multi-view geometry and aligning similar instances into a shared canonical coordinate frame. Canonical poses are manually annotated for only a small set of reference objects (fewer than 0.01% of all images) and propagated to the remaining instances via cross-instance alignment. All propagated canonical poses are then verified from multiple viewpoints. We further introduce cross-category orientation rules that induce category-level symmetries, enabling symmetry-aware evaluation. Beyond establishing dedicated training and evaluation splits as a benchmark for 9D pose foundation models, we show that training on Every9D-21M improves performance on ImageNet3D and PASCAL3D+, and generalizes to HANDAL substantially better than training on ImageNet3D. Data and code are available at https://github.com/GenIntel/Every9D.

Portrait animation methods have achieved substantial visual quality and lip synchronization, but fine-grained manipulation of the eye region still faces a trade-off between input granularity and motion accuracy. Existing methods using emotion labels or coarse text prompts are insufficient for describing subtle ocular dynamics, whereas approaches based on Action Units or driving videos provide higher fidelity at the cost of a heavier input burden. These limitations are still restrictive for beyond-emotion states (e.g., thinking) and drowsiness. In light of the above, we propose CogPortrait, a two-stage framework that generates portrait animations from high-level labels. In the first stage, three chain-of-thought Multimodal Large Language Models (MLLMs) agents compile high-level labels into facial keypoints through temporal event planning, prototype retrieval, and composition from a real-behavior library, and semantic-physiological constraint enforcement. In the second stage, a DiT-based video generation backbone synthesizes the final animation conditioned on the keypoints, reference portrait, audio, and text prompt, enhanced by a dynamic classifier-free guidance strategy with eye-region-aware reweighting and KTO-based refinement for boundary cases. We further introduce the EMH benchmark covering diverse emotions and beyond-emotion categories with two AU-level metrics for evaluating fine-grained eye-region and head-motion control. Extensive experiments on HDTF and the EMH benchmark demonstrate that CogPortrait achieves more precise eye-region control than existing methods while maintaining supe- rior visual quality and identity consistency

The problem of object pose and shape estimation has seen key advancements lately. Encoder-decoder (e.g., SAM3D, LRM, CRISP) and diffusion-based models (e.g., InstantMesh, Zero123, SceneComplete) have shown category-agnostic shape encoding capacity and open-set generalizability. In this work, we ask the question: Are the object pose and shape estimation methods mature enough, such that when used with antipodal grasp sampling, can outperform the end-to-end grasp synthesis methods? We explore this question in detail by scoping our study to parallel jaw grippers, 7-DoF grasps, and single-view RGB(-D) image as input. We implement and compare a state-of-the-art, end-to-end grasp synthesis method and three modular methods, which first estimate the object pose and shape for all objects in the scene, and generate grasps using antipodal sampling. We observe that the modular methods outperform the end-to-end method in all our experiments. The modular methods are able to synthesize plenty of grasps, even for small objects, where the end-to-end methods fail. The effectiveness of the modular methods is contingent on the accuracy of the pose and shape estimation, and suffers partial degradation in cluttered scenes - a limitation of the existing pose and shape estimation methods. We also analyze the failure modes and run-times for the three modular methods, which use two different ways of object pose and shape estimation: one based on an encoder-decoder model, while another a diffusion model. Finally, we demonstrate that the single-view object pose and shape estimation methods can be augmented with vision-language models to yield language-conditioned grasps from just single-view RGB-D image as input. We notice comparable performance to the state-of-the-art LERF-TOGO baseline.

RGB-based imitation learning requires many demonstrations to generalize to unseen objects or scenes, motivating research into intermediate representations to improve generalization for robotic manipulation. Visual foundation models enable one-shot extraction of keypoints to provide such representation. However, it remains unclear how to integrate them into imitation learning optimally and when they outperform alternative representations. We combine approaches from previous works on keypoint imitation learning (KIL) and investigate several design choices to provide practical guidelines. Using over 2000 real-world rollouts, we also assess the generalization capabilities of KIL to unseen objects and scene variations. KIL achieves a 75% overall success rate across five tasks, significantly outperforming the RGB baseline (47%) and performing on par with S2-diffusion (73%). Finally, we explore the limitations of the foundation models used for keypoint extraction and extend KIL to tasks with multiple object instances. Our results confirm KIL as a data-efficient approach for robot learning, though it does not outperform alternative representations and inherits limitations of the foundation models used for keypoint extraction. All rollout videos, demonstrations, and results are available at https://kil-manipulation.github.io/.

Surgical instrument pose estimation provides crucial information for promising applications, including autonomous robotic surgery, skill assessment, and standardization of surgical workflow. However, this task remains highly challenging due to high precision requirements, frequent occlusions, textureless instruments, scarcity of depth information and very limited annotated data. These constraints often lead to unsatisfactory performance when employing general object pose estimation approaches to surgical scenarios. To address these issues, we first construct a new dataset SynSurg6D, to alleviate the data shortage in this task. We further propose SurfSurg6D, a dense-correspondence framework tailored for surgical instrument pose estimation. Experimental results on the SurgRIPE, EndoVis2018 and SurgPose datasets demonstrate that the introduction of our generated dataset SynSurg6D is able to diversify the pose distributions, thus enhancing the performance of existing approaches. Furthermore, SurfSurg6D outperforms existing methods, providing a robust solution for precise and efficient RGB-only pose estimation.

Category-level object pose estimation aims to predict the pose and size of arbitrary objects in specific categories. Existing methods struggle with the inherent incompleteness of observed point clouds, which limits their ability to capture complete object shapes for robust pose reasoning. While point cloud completion offers a promising solution, naively treating it as a separate preprocessing step for partial observations introduces compounding errors and additional computational overhead, ultimately hindering both accuracy and efficiency. To address these challenges, we propose ComPose, a novel unified framework that tightly integrates shape completion to provide complete geometric cues for enhanced pose estimation. At the core of ComPose is a keypoint-based progressive completion module, which recovers full shape representations by progressively predicting a sparse set of keypoints and their surrounding dense point sets, empowering the keypoints to capture holistic object geometries. A geometric relation encoding module further enriches keypoint features with both local and global geometric context. In addition, we introduce a novel geometric relation consistency loss to enforce structural alignment between observed keypoints and their predicted NOCS coordinates, ensuring globally coherent coordinate transformations. Extensive experiments on standard benchmarks demonstrate that our method outperforms state-of-the-art approaches without relying on category-level shape priors.

Recent advances in imitation learning and vision-language models highlight the need for high-fidelity tactile perception, with 6-DoF tactile object pose estimation providing a crucial foundation for precise robotic manipulation. We introduce InvariantCloud, a 6-DoF pose estimation framework that leverages the global invariance of surface marker constellations on vision-based tactile sensors. In contrast to recent approaches, our one-shot globally invariant point cloud registration suppresses cumulative drift and overcomes long-standing limitations in accurately estimating yaw (Z-axis) rotation. Experimental verifications show that InvariantCloud achieves superior yaw tracking accuracy and re-localization repeatability compared to existing benchmarks, demonstrating its precision and robustness in long-sequence manipulation tasks.

A robot resolving ``put the cup on that one'' must fuse gesture, language, and scene geometry, yet 3D grounding benchmarks only partially capture this regime: descriptions are written post-hoc, gestures are templated, or pointing is staged for the camera. MM-Conv captures natural co-speech gesture from dyadic VR interaction alongside full-body motion capture and 3D scene graphs. We use it to evaluate pose-language fusion with a decoupled late-fusion architecture in which pose and text pathways share no learned parameters. The two choices together make category, pose, and text contributions easier to isolate through controlled ablations. Fusion with frozen MiniLM category embeddings exceeds pose alone and the best text-only pathway on every reference type, reaching 31.9% top-1. The learned scalar gate flips between opposing policies depending on whether the text pathway has category access. This is a reliability diagnostic: fusion-accuracy claims for semantic grounding systems are indistinguishable from category-representation artifacts unless pathways are architecturally decoupled.

Robotic manipulation of deformable linear objects (DLOs) presents significant challenges due to complex dynamics and frequent self-occlusions. Existing robotic knot tying methods typically rely on precise topological state tracking with ordered keypoints and explicit edge connectivity. This reliance makes them prone to failures due to tracking drift and topology mismatch caused by repeated bending and crossings during knot formation.To address these limitations, we introduce RoboHitch, a novel framework that learns to perform hitch knot tying from human demonstrations using only disordered 3D keypoints and RGB images. This eliminates the need for explicit topological order, allowing for more flexible manipulation. Our method employs a dynamic Graph Autoencoder to extract geometric features from untracked keypoints, complemented by a Convolutional Autoencoder that captures essential visual context. A bidirectional cross-attention mechanism then fuses these modalities to jointly predict pick and place affordances, facilitating implicit reasoning about the rope's state and enabling knot tying under occlusion.Real-world experiments demonstrate the effectiveness and generalizability of our approach, successfully completing hitch knots in scenarios with self-occlusions.

Reconstructing the motion of objects from videos is a key component for embodied AI and robot manipulation. While diverse approaches to object pose tracking have been studied, they rely heavily on strong external priors, such as depth data or 3D templates, and remain highly vulnerable to severe occlusions by hand grasps despite the use of explicit masks. In this work, we present ComPose, a 6DoF object tracking framework designed for hand-aware object pose estimation from RGB video. Rather than treating the hand purely as an occluder, our method harmonizes hand motions as a \textit{complementary cue} for object tracking. In detail, we recover a variety of object motions over time by combining object and hand cues from foundation models within a unified tracking pipeline. Here, ComPose adaptively selects informative hand joints, combines object- and hand-derived cues for motion estimation, and refines the resulting object motion using visible geometric evidence and a learned correction. We further enforce the temporal consistency over both rotation and translation, yielding stable 3D object trajectories over time without any external smoothing. Extensive experiments show that our method is accurate, efficient, and robust under severe hand occlusion and geometric ambiguity. In addition, the resulting trajectories can also effectively transfer to downstream robot manipulation by enabling robots to reconstruct human actions from online videos.

Accurately reconstructing full-body poses from sparse head and hand trajectories is a foundational challenge for immersive AR/VR telepresence. Current methods often struggle with error accumulation and unnatural joint coordination, primarily because they treat the human body as a monolithic entity, thereby failing to capture the fine-grained ``atomic intents'' embedded in subtle signal variations and overlooking the inherent structural topology. To bridge this gap, we present AtomicMotion, a framework designed to decouple and re-integrate body dynamics through three core innovations. First, we introduce a logical body partitioning scheme that decomposes the skeleton into five distinct clusters based on functional intent; this ensures that each partition preserves internal joint synergies while isolating local motion primitives. Second, to robustly map sparse inputs to high-dimensional poses, we employ a masked full-body pre-conditioning strategy during training, forcing the model to internalize global skeletal topology and latent kinematic constraints. Finally, addressing the limitations of vanilla spatial attention, which often ignores fixed physiological connectivity, we propose Kinematic Attention. By embedding the classical kinematic tree structure into the attention mechanism, we ensure biological plausibility in the synthesized motions. Extensive evaluations on the AMASS dataset demonstrate that AtomicMotion significantly outperforms existing baselines, yielding higher reconstruction fidelity and superior biomechanical realism.

Monocular egocentric human pose estimation is essential for ubiquitous activity monitoring. However, understanding the user's absolute location within the environment remains a challenge. Existing methods primarily focus on relative motion from an initial position, and tend not to account for the wearer's absolute location within an environment. Furthermore, inherent scale ambiguity in monocular vision leads to severe translational drift, limiting long-term tracking without specialized multi-sensor hardware. To address this, we propose MapMonoEgo, a novel framework achieving globally consistent human pose estimation solely from a monocular camera by leveraging a pre-scanned 3D point cloud. We also introduce AIST-Living dataset, a new dataset pairing egocentric video with ground-truth motion in a scanned environment. Experiments demonstrate that our approach significantly outperforms the state-of-the-art baseline, proving its utility for practical monitoring tasks without specialized hardware.

EASA's learning-assurance guidance requires data-driven aviation systems to build and monitor their own situation representation, yet for neural networks the technical means to provide such evidence remain an open problem. We address this gap for a vision-based aircraft landing system: we propose that a minimally assurable model must at least be shown to separate content from style in its own situation representation. Showing that the model's predictions then rely largely on the contentful representation components leads to a concrete assurance path. To demonstrate this assurance path on a concrete model we train a vision transformer model for runway keypoint regression on the LARDv2 dataset. The model, which acts as the subject for our assurance demonstration, produces per-patch embeddings that we decompose into interpretable atoms via K-SVD sparse dictionary learning. A qualitative visualization confirms that contentful atoms track task-relevant runway structure and stylistic atoms track domain-specific appearance, and the regression head is shown to place almost all of its linear weight on contentful atoms. We further build on the content/style separation and define out-of-model-scope (OOMS) detection, a novel runtime assurance approach directly monitoring the model's situation representation. OOMS monitoring is complementary to operational design domain and output-space out-of-distribution monitoring and addresses concrete requirements of the recent EASA guidance. By directly analyzing a model's situation representation both at test time and runtime, this work delivers the first concrete piece of the representation-level evidence that EASA learning-assurance guidance demands, and points to mechanistic interpretability as a practical building block of future aviation safety cases.

Spacecraft pose estimation networks require tens of thousands of CAD-rendered images to be trained. This reliance on synthetic CAD data (i) limits applicability to targets with reliable geometry prior, excluding uncooperative or poorly documented spacecraft, and (ii) causes poor generalization to real on-orbit conditions due to unrealistic illumination and material appearance. This paper introduces a NeRF-based image augmentation method that enables the learning of spacecraft pose estimators from only a few tens to a few hundreds of images. The method learns a Neural Radiance Field of the target and generates a large, diverse dataset through geometrically-consistent viewpoint and appearance augmentation. This augmented dataset enables the training of accurate target-specific pose estimators without requiring a CAD model or large synthetic datasets. Experiments show that our approach supports the training of accurate pose estimators from only 25 to 400 realistic images, even under severe illumination variations. When applied on large CAD-based synthetic datasets, the NeRF-based augmentation also enhances out-of-domain generalization, yielding improved robustness to real on-orbit conditions.

Accurate estimation of plant skeletal structures (e.g., branching structures) from images is essential for smart agriculture and plant science. Unlike human skeletons with fixed topology, plant skeleton estimation presents a unique challenge, i.e., estimating arbitrary tree graphs from images. To address this problem, we introduce PlantPose, a universal plant skeleton estimator via tree-constrained graph generation. PlantPose combines learning-based graph generation with traditional graph algorithms to enforce tree constraints during the training loop. To enhance the model's generalization capability, we curate a large and diverse dataset comprising real-world and synthetic plant images, along with simplified representations (e.g., sketches and abstract drawings). This dataset enables the generalized model to adapt to diverse input styles and categories of plant images while preserving topological consistency. Our approach demonstrates robust and accurate plant skeleton estimation across multiple domains, including previously unseen out-of-domain scenarios. Further analyses highlight the method's strengths and limitations in handling complex, heterogeneous data distributions. All implementations and datasets are available at https://github.com/huntorochi/PlantPose/.

arly identification of motor impairment in infancy relies on expert visual assessment of spontaneous movement, motivating the development of automated, objective alternatives. One promising approach is using computer vision, which benefits from high quality pose estimation from video. In this study, we systematically evaluated three state-of-the-art pose estimation frameworks (MeTRAbs-ACAE, SAM 3D Body, and Sapiens) on 100 videos over 13 sessions of 8 infants recorded with a multi-view markerless motion capture system. We quantified keypoint detection accuracy using reprojection error, geometric consistency, and Procrustes-aligned 3D position error, and demonstrated proof-of-concept for fitting an inverse kinematic framework to infant data. While Sapiens achieved the lowest reprojection error and highest geometric consistency of the methods evaluated (22.8 pixels and 0.82, respectively), SAM 3D Body provided the most comprehensive 3D information for kinematic reconstruction with Procrustes-aligned position errors of 19 to 28 mm. We demonstrate in a case comparison example that biomechanical models fit to SAM 3D estimates distinguish representative movement patterns in infants related to motor development, as identified by a clinical expert. Together, these findings highlight both the promise and current limitations of 3D pose estimation for infant biomechanics and establish preliminary groundwork for scalable, video-based assessment of early motor development.

Urgently needed generalizable robot object interaction and manipulation requires high-quality Cross-Category object perception. As a pioneer of this area, Generalizable and Actionable Parts (GAParts) understanding has attracted increasing attention from relevant researchers. However, most recent works either have insufficient design regarding the symmetry issue or require rich symmetry annotation, which severely impedes precise GAPart pose estimation in data-lacking scenarios. In this paper, we propose SAFAG, a novel Symmetry Annotation-Free framework for Generalizable and Actionable Parts Pose Estimation. Specifically, we suggest a stepwise refinement two-stage framework for candidate-to-final quaternion regression, and tackle the symmetry prediction as a probability distribution problem with self-supervised learning strategy. The experimental results demonstrate the superior performance and robustness of our SAFAG. We believe that our work has the enormous potential to be applied in many areas of embodied AI system.

Category-level 6D object pose estimation is typically formulated as a multi-category joint learning problem with fully shared model parameters. However, pronounced geometric heterogeneity across categories entangles incompatible optimization signals in shared modules, resulting in gradient conflicts and negative transfer during training. To address this challenge, we first introduce gradient-based diagnostics to quantify module-level cross-category contention. Building on results of diagnostics, we propose DecomPose, a difficulty-aware decomposition framework that mitigates optimization contention via: (1) difficulty-aware gradient decoupling, which groups categories using a data-driven difficulty proxy and routes each instance to a group-specific correspondence branch to isolate incompatible updates; and (2) stability-driven asymmetric branching, which assigns higher-capacity branches to structurally simple categories as stable optimization anchors while constraining complex categories with lightweight branches to suppress noisy updates and alleviate negative transfer. Extensive experiments on REAL275, CAMERA25, and HouseCat6D demonstrate that DecomPose effectively reduces cross-category optimization contention and delivers superior pose estimation performance across multiple benchmarks.

We propose a method of estimating a 3D human pose from a single view without 3D supervision. The key to our method is to leverage the 2D diffusion priors of motion diffusion models (MDMs) pre-trained on large 2D human pose datasets. Specifically, we extend multi-view ancestral sampling of diffusion models to the task of 2D-3D lifting of human pose. To this end, we newly propose a conditional multi-view ancestral sampling (cMAS) that optimizes the 3D pose such that its multi-view projections follow the manifold in 2D MDM noise space, while conditioning the 3D pose to match the given 2D poses and anatomical constraints of humans. Experiments on the Yoga dataset demonstrate that our method achieves better cross-domain performance compared to state-of-the-art supervised and unsupervised 3D pose estimation methods, including extreme human poses where 3D supervision is unavailable. Code is available at: https://github.com/asaa0001/c-MAS.

In multi-view 3D human pose estimation, models typically rely on images captured simultaneously from different camera views to predict a pose at a specific moment. While providing accurate spatial information, this traditional approach often overlooks the rich temporal dependencies between adjacent frames. We propose a novel 3D human pose estimation input method: the sparse interleaved input to address this. This method leverages images captured from different camera views at various time points (e.g., View 1 at time $t$ and View 2 at time $t+δ$), allowing our model to capture rich spatio-temporal information and effectively boost performance. More importantly, this approach offers two key advantages: First, it can theoretically increase the output pose frame rate by N times with N cameras, thereby breaking through single-view frame rate limitations and enhancing the temporal resolution of the production. Second, using a sparse subset of available frames, our method can reduce data redundancy and simultaneously achieve better performance. We introduce the DenseWarper model, which leverages epipolar geometry for efficient spatio-temporal heatmap exchange. We conducted extensive experiments on the Human3.6M and MPI-INF-3DHP datasets. Results demonstrate that our method, utilizing only sparse interleaved images as input, outperforms traditional dense multi-view input approaches and achieves state-of-the-art performance. The source code for this work is available at: https://github.com/lingli1724/DenseWarper-ICLR2026

Category-agnostic pose estimation (CAPE) aims to localize keypoints on query images from arbitrary categories, using only a few annotated support examples for guidance. Recent approaches either treat keypoints as isolated entities or rely on manually defined skeleton priors, which are costly to annotate and inherently inflexible across diverse categories. Such oversimplification limits the model's capacity to capture instance-wise structural cues critical for accurate pixel-level localization. To overcome these limitations, we propose GenCape, a Generative-based framework for CAPE that infers keypoint relationships solely from image-based support inputs, without additional textual descriptions or predefined skeletons. Our framework consists of two principal components: an iterative Structure-aware Variational Autoencoder (i-SVAE) and a Compositional Graph Transfer (CGT) module. The former infers soft, instance-specific adjacency matrices from support features through variational inference, embedded layer-wise into the Graph Transformer Decoder for progressive structural priors refinement. The latter adaptively aggregates multiple latent graphs into a query-aware structure via Bayesian fusion and attention-based reweighting, enhancing resilience to visual uncertainty and support-induced bias. This structure-aware design facilitates effective message propagation among keypoints and promotes semantic alignment across object categories with diverse keypoint topologies. Experimental results on the MP-100 dataset show that our method achieves substantial gains over graph-support baselines under both 1- and 5-shot settings, while maintaining competitive performance against text-support counterparts.

Pedestrian motion, due to its causal nature, is strongly influenced by domain gaps arising from discrepancies between training and testing data distributions. Focusing on 3D human pose estimation, this work presents a controllable human pose generation framework that synthesizes diverse video data by systematically varying poses, backgrounds, and camera viewpoints. This generative augmentation enriches training datasets, enhances model generalization, and alleviates the limitations of existing methods in handling domain discrepancies. By leveraging both indoor/real-world and outdoor/virtual datasets, we perform cross-domain data fusion and controllable video generation to construct enriched training data, tailored to realistic deployment settings. Extensive experiments show that the augmented datasets significantly improve model performance on unseen scenarios and datasets, validating the effectiveness of the proposed approach.

In visual localization, Absolute Pose Regression (APR) enables real-time 6-DoF camera pose inference from single images, yet critically depends on fine-tuning data quality and coverage. While recent methods leverage 3D Gaussian Splatting (3DGS) for novel view synthesis-based data augmentation, random sampling generates redundant views and noisy samples from poorly reconstructed regions. To mitigate this research gap, we propose PoseCompass, an intelligent pose selection pipeline for 3DGS-based APR. PoseCompass formulates synthetic pose selection and derives a value-based pose ranking mechanism to identify informative poses. The ranking integrates three dimensions: Localization Difficulty, favoring challenging regions; Coverage Novelty, exploring under-sampled areas; and Rendering Observability, filtering artifacts and noise. PoseCompass then generates trajectory-constrained candidates, selects the top-K ranked poses, and synthesizes views using 3DGS with lightweight diffusion-based alignment. Finally, the pose regressor is fine-tuned on mixed real and synthetic data. We evaluate PoseCompass on 7-Scenes, where it reduces adaptation time from 15.2 to 5.1 minutes, a 3x speedup, while cutting median pose errors by 53.8 percent and significantly outperforming random baselines.

We present a framework for distributed Pose Graph Optimization (PGO) by formulating the problem as a second-order continuous-time dynamical system evolving on Lie groups. By modeling pose variables as massive particles subject to damping, the equilibrium points of the resulting Riemannian dynamics coincide with first-order critical points of the original PGO problem. Using the governing damped Euler--Poincaré equations and a semi-implicit geometric integrator, we design an optimization algorithm that generalizes existing algorithms such as Riemannian gradient descent and Gauss--Newton. In multi-robot settings, we present a fully distributed and parallel method based on block-diagonal mass and damping matrices, where each robot solves an ordinary differential equation for its own poses with minimal communication overhead. Moreover, modeling both state and velocity enables principled neighbor prediction that significantly improves convergence under delayed communication. Theoretically, we present an analysis and establish sufficient condition that ensures energy dissipation under the employed geometric discretization scheme. Experiments on benchmark PGO datasets demonstrate that the proposed solver achieves superior performance compared to state-of-the-art distributed baselines in both synchronous and asynchronous regimes.

We introduce HYPERPOSE, a novel 3D human pose estimation framework that performs spatio-temporal reasoning entirely within the Lorentz model of hyperbolic space $\mathbb{H}^d$ to natively preserve the hierarchical tree topology of the human skeleton. Current state-of-the-art pose estimators aim to capture complex joint dynamics by relying on transformers and graph convolutional networks. Since these architectures operate exclusively in Euclidean space which fundamentally mismatches the inherent tree structure of the human body, these methods inevitably suffer from exponential volume distortion and struggle to maintain structural coherence. To this end, we depart from flat spaces and aim to improve geometric fidelity with Hyperbolic Kinematic Phase-Space Attention (HKPSA), natively embedding complex joint relationships without distortion, alongside a multi-scale windowed hyperbolic attention mechanism that efficiently models temporal dynamics in $O(TW)$ complexity. Furthermore, to overcome the well-known instability of training non-Euclidean manifolds, HYPERPOSE introduces a novel Riemannian loss suite and an uncertainty-weighted curriculum, enforcing physical geodesic constraints like bone length and velocity consistency. Extensive evaluations on the Human3.6M and MPI-INF-3DHP datasets demonstrate that HYPERPOSE achieves state-of-the-art structural and temporal coherence, significantly reducing both volume distortion and velocity error, while establishing new state-of-the-art benchmarks in overall positional accuracy.

Existing 2D-3D lifting human pose estimation methods have achieved strong performance. But the utilization of historical pose representations across network depth was overlooked. In current pipelines, information is propagated through fixed residual connections, which restricts effective reuse of early-layer features such as fine-grained spatial structures and short-term motion cues. However, naively incorporating historical features across layers is non-trivial. We further identify that maintaining a consistent representation space across layers is a prerequisite for effective cross-layer feature aggregation. To address this issue, we propose a history-aware framework that enables effective network cross-layer history feature utilization. Specifically, we adopt a spatial-temporal parallel Transformer backbone to prevent alternating spatial-temporal transformations during sequential processing, thereby maintaining a consistent representation space. Building upon this, we introduce a History Pose Accumulation (HPA) mechanism that adaptively aggregates features from all preceding layers to enhance current representations. Furthermore, we propose a Layer Pose History Aggregation (LPA) module that transforms layer pose features into a compact and structured form, reducing redundancy and enabling more stable aggregation. Extensive experiments demonstrate that our approach achieves state-of-the-art performance on benchmarks.

On-orbit servicing and active debris removal involving non-cooperative spacecraft require reliable pose estimation to supply accurate position and orientation data for autonomous visual navigation. Learning-based monocular methods have seen widespread adoption in spacecraft pose estimation, yet they suffer from an intrinsic depth ambiguity problem and tend to fail under the harsh illumination conditions routinely encountered in orbit. Active depth sensors could in principle address the geometric ambiguity, but their power and mass requirements make them poorly suited to most spacecraft platforms. This work addresses these issues through a passive stereo vision framework for six-degree-of-freedom (6-DOF) pose estimation of non-cooperative spacecraft. A binocular stereo matching network called TSCA-Stereo is developed to cope with weak-texture surfaces, specular highlights, and severe lighting variations typical of space imagery. A cross-modal fusion Transformer is introduced to combine RGB appearance information with stereo depth features in an adaptive manner, supporting reliable pose recovery. A synthetic binocular multimodal dataset is also built for the experiments, covering stereo disparity maps and 6-DOF pose annotations across a range of illumination scenarios, attitude configurations, and noise levels. Experimental results show that TSCA-Stereo outperforms the baseline across every evaluated metric on this space-specific dataset. The full pose estimation pipeline achieves a mean translation error of 0.0419 m and a mean orientation error of 0.8632° under varied imaging conditions, confirming that the passive stereo approach is both effective and resilient when operating under the demanding visual conditions of the space environment.

In this paper, we propose a modular framework for 6D pose estimation based on keypoint heatmap regression. Our approach combines YOLOv10m for object detection with a ResNet18-based network that predicts 2D heatmaps from RGB images. Keypoints extracted from these heatmaps are used to estimate the 6D object pose via the PnP RANSAC algorithm. We compare different keypoint selection strategies to assess their impact on pose accuracy. Additionally, we extend the baseline by incorporating depth data using a cross-fusion architecture, which enables interaction between RGB and depth features at multiple stages. We further explore general training improvements, such as experimenting with activation functions and learning rate scheduling strategies to improve model performance. Our best RGB-only model achieved a mean ADD-based accuracy of 84.50%, while the RGB-D fusion model reached 92.41% on the LINEMOD dataset. The code is available at https://github.com/ameermasood/HeatNet.

The robustness of event cameras to high dynamic range and motion blur holds the potential to improve visual odometry systems in challenging environments. Although their high temporal resolution does not require synchronous processing, most event-based odometry methods still run at fixed rates, which simplifies system design but restricts latency and throughput. In this work, we present AERO-VIS, a stereo event-inertial SLAM system with an integrated, data-driven, robust, and performance-optimized keypoint detector. By decoupling event preprocessing from state estimation, our architecture operates asynchronously at the maximum rate supported by available hardware, dynamically adapting to downstream runtime demands and ensuring low-latency, real-time performance. When deploying AERO-VIS on a UAV, we achieve unprecedented accuracy in onboard event-based SLAM. These unique characteristics enable us to present the first purely event-based inertial SLAM system that demonstrates closed-loop UAV control and large-scale state estimation while relying solely on onboard compute. Videos of the experiments, source code, and additional results are available at https://ethz-mrl.github.io/AERO-VIS/.

The rapid advances in deep learning have significantly enhanced the accuracy of multimodal 3D human pose estimation (HPE). However, the state-of-the-art (SOTA) HPE pipelines still rely on Transformers, whose quadratic complexity makes real-time processing for long sequences impractical. Mamba addresses this issue through selective state-space modeling, enabling efficient sequence processing without sacrificing representational power. Nevertheless, it struggles to capture complex spatial dependencies in multimodal settings. To bridge this gap, we propose VIMCAN, a hybrid architecture that combines the efficient sequence modeling of Mamba with the spatial reasoning of Cross-Attention, and performs robust visual-inertial fusion and human pose estimation between RGB keypoints and wearable IMU data. By leveraging Mamba's dynamic parameterization for temporal modeling and Attention for spatial dependency extraction, VIMCAN achieves superior accuracy, with mean per-joint position errors (MPJPE) of 17.2 mm on TotalCapture and 45.3 mm on 3DPW. VIMCAN outperforms prior Transformer-based and other SOTA approaches while supporting real-time inference at over 60 frames per second on consumer-grade hardware. The source code is available at \href{https://github.com/Eddieyzp/VIMCAN}{this GitHub repository}.

LLM-based game generation promises to turn natural-language specifications into executable games, but progress is limited by the lack of reliable automated verification. Unlike conventional code generation, game correctness is defined over long-horizon interaction: a game may appear correct while violating core mechanics such as state updates, interaction rules, and phase transitions. Existing Agent-as-a-Verifier approaches collapse verification into open-ended gameplay, making verdicts reachability-bound, time-consuming, coverage-limited, and sensitive to the agent's gameplay ability. We present GameGen-Verifier, an automated verification paradigm for LLM-generated games that decomposes a specification into verifiable keypoints and grounds them into independent verification units. Each unit patches the game runtime into a concrete target state, executes a bounded interaction, and judges the outcome against the keypoint assertion. We implement GGV-Harness, a scalable agentic harness providing concurrency management, runtime isolation, and fault recovery. On VeriGame, our dataset of 100 games across seven genres, GameGen-Verifier achieves up to 92.2% accuracy against human judgments versus 58.8% for the coverage-enforced Agent-as-a-Verifier baseline, while reducing wall-clock time by up to 16.6x.

In many practical 6D object pose estimation scenarios, we often have access to only a single real-world RGB-D reference view per object, typically without CAD models. Existing methods largely rely on explicit 3D models or multi-view data, which limits their scalability. To address this challenging single-reference model-free setting, we propose \textbf{OneViewAll}, a semantic-prior-guided framework that performs pose estimation via a novel Project-and-Compare paradigm. Instead of relying on computationally expensive CAD-based rendering, our method directly aligns reference and query observations within a projection-equivariant space. OneViewAll progressively integrates hierarchical semantic priors across three levels: (1) \textit{category- and scene-level} priors for efficient hypothesis initialization; (2) \textit{object-level symmetry} priors for geometry completion via mirror fusion; and (3) \textit{patch-level} priors for discriminative refinement. Extensive experiments demonstrate that OneViewAll achieves \textbf{92.5%} ADD-0.1 accuracy on the LINEMOD dataset using only one real reference view -- significantly outperforming the CVPR 2025 baseline One2Any (52.6%). It also yields consistent improvements on YCB-V, Real275, and Toyota-Light while maintaining low inference latency. Our results underscore the efficacy of symmetry-aware projection in handling symmetric, texture-less, and occluded objects.

Visual localization is a core technology for augmented reality and autonomous navigation. Recent methods combine the efficient rendering of 3D Gaussian Splatting (3DGS) with feature-based localization. These methods rely on direct matching between 2D query features and the 3D Gaussian feature field, but this often results in mismatches due to an inherent bias in the learned Gaussian feature. We theoretically analyze the feature learning process in 3DGS, revealing that the widely adopted $α$-blending optimization inherently introduces bias into 3D point features. This bias stems from the entanglement between individual Gaussians and their neighboring Gaussians, making the learned features unsuitable for precise matching tasks. Motivated by these findings, we propose ULF-Loc, an unbiased landmark feature framework that replaces biased feature optimization with geometry-weighted feature fusion. We further introduce keypoint-consensus landmark sampling to select reliable Gaussians and local geometric consistency verification to reject mismatches caused by rendering artifacts. On the Cambridge Landmarks dataset, ULF-Loc reduces the mean median translation error by 17% compared to the state-of-the-art, while achieving superior efficiency with only 1/10 the training time and 1/6 the GPU memory of STDLoc.

This paper introduces the ensemble directional Kalman filter (EnDKF), an ensemble-based Kalman filtering approach for pose tracking that jointly estimates an object's position and attitude using ideas from directional statistics. The EnDKF integrates a unit-quaternion attitude representation to move beyond canonical Kalman filter mean and covariance assumptions that poorly capture directional uncertainty. Experiments on a synthetic constant-velocity constant-angular-velocity system and a digital-twin head-tracking scenario using the FoundationPose algorithm demonstrate a significant reduction in error as opposed to merely using measurements.

Single-view RGB object pose estimators have reached a level of precision and efficiency that makes them good candidates for vision-based robot control. However, off-the-shelf methods lack temporal consistency and robustness that are mandatory for a stable feedback control. In this work, we develop a factor graph approach to enforce temporal consistency of the object pose estimates. In particular, the proposed approach: (i) incorporates object motion models, (ii) explicitly estimates the object pose measurement uncertainty, and (iii) integrates the above two components in an online optimization-based estimator. We demonstrate that with appropriate outlier rejection and smoothing using the proposed factor graph approach, we can significantly improve the results on standardized pose estimation benchmarks. We experimentally validate the stability of the proposed approach for a feedback-based robot control task in which the object is tracked by the camera attached to a torque controlled manipulator.

Physical violence in public spaces is a significant public health concern, with minor incidents such as pushing often serving as precursors to more severe escalations. This research develops an automated system for the real-time detection of moderate physical violence, specifically pushing, in surveillance camera footage. The proposed solution integrates state-of-the-art computer vision models, utilizing YOLO11 and YOLO11-Pose for human detection and skeletal keypoint extraction. By calculating body inclination and joint angles between shoulders and hips, a Random Forest classifier was trained to distinguish between normal behavior and aggressive physical contact. The system's performance was evaluated through three progressive case studies representing increasing levels of difficulty. In controlled environments with frontal views, the model achieved a precision of 0.98. In the most challenging scenario, featuring high-altitude, steep-angle recordings from real-world surveillance infrastructure, the system maintained a precision of 0.72 despite significant perspective distortion and visual noise. These results demonstrate the feasibility of using skeletal analysis for early violence intervention in urban security contexts.

This paper presents a dual quaternion framework for 6-DOF visual target tracking that addresses key limitations of perspective-n-point (P$n$P) solvers: sensitivity to noise and outliers, and inability to propagate estimates through measurement dropouts. A nonlinear observability analysis is performed using a Lie algebraic approach, deriving sufficient conditions for local observability under two sensing modalities: relative position vector and unit vector measurements. For the unit vector case, the classical collinear feature point degeneracy of the perspective-three-point problem is recovered through rank analysis of the observability codistribution matrix, providing a control-theoretic interpretation of a previously geometric result. A dual quaternion Lie group unscented Kalman filter is then developed, directly modeling relative dynamics without assumptions about cooperative measurements or slowly-varying motion. Simulations demonstrate improved pose estimation accuracy and robustness to occlusions compared to an off-the-shelf P$n$P solver. Results are broadly applicable to visual-inertial navigation, simultaneous localization and mapping, and P$n$P solver development.

Millimetre-wave (mmWave) radar offers a more privacy-preserving alternative to RGB-based human pose estimation. However, existing methods typically rely on pre-extracted intermediate representations such as sparse point clouds or spectrogram images, where the rich spatiotemporal information naturally present in radar video streams is discarded for model learning, while such signal processing adds system complexity. In addition, existing solutions are mainly conducted in an end-to-end supervised manner without leveraging unlabelled raw video streams to learn generalized representations. In this study, we present MAEPose, a masked autoencoding-based human pose estimation approach that operates directly on mmWave spectrogram videos. MAEPose learns spatiotemporal motion-aware generalized representations from unlabelled radar video, and leverages its heatmap decoder for multi-frame pose estimation predictions. We evaluate it across three datasets based on leave-one-person-out cross-validation with rigorous statistical testing. MAEPose consistently outperforms state-of-the-art baselines by up to 22.1% in MPJPE p<0.05, and maintains robust accuracy under zero-shot bystander interference with only a 6.5% error increase. Ablation studies confirm that both the pre-training and the heatmap decoder contribute substantially, while modality analysis indicates that leveraging Range-Doppler video as input achieves better pose estimation performance than Range-Azimuth or their fusion, with lower computational cost.

Gait recognition has emerged as a compelling biometric modality for surveillance and security applications, offering inherent advantages such as non-intrusiveness, resistance to disguise, and long-range identification capability. However, prevailing approaches struggle to comprehensively capture and exploit the rich biometric cues embedded in human locomotion, particularly under covariate interference including viewpoint variation, clothing change, and carrying conditions. In this paper, we present a high-precision gait recognition framework that deeply extracts and synergistically fuses gait dynamics with body shape characteristics through a multi-branch architecture grounded in deep residual learning. Specifically, we first employ the High-Resolution Network (HRNet) to perform robust skeletal keypoint estimation, preserving fine-grained spatial information even under low-resolution inputs. We then construct three complementary feature branches -- body proportion, gait velocity, and skeletal motion -- from the extracted pose sequences. A 50-layer Residual Network (ResNet-50) backbone is leveraged within a deep feature extraction module to capture hierarchically rich and discriminative representations. To effectively integrate heterogeneous feature streams, we design a Multi-Branch Feature Fusion (MFF) module inspired by channel-wise attention mechanisms, which dynamically allocates contribution weights across branches through learned activation parameters. Extensive experiments on the cross-view multi-condition CASIA-B benchmark demonstrate that our method achieves a Rank-1 accuracy of 94.52% under normal walking, with the best recognition performance among skeleton-based methods for the coat-wearing condition.

Depth ambiguity and joint uncertainty are the two main obstacles in obtaining accurate human pose predictions by 2D-to-3D lifting methods proposed in the literature. In particular, these issues are caused by 2D joint locations that can be mapped to multiple 3D positions, inducing multiple possible final poses. Following these considerations, we propose leveraging diffusion-based models generation capability to predict multiple hypotheses and aggregate them in a final accurate pose. Therefore, we introduce SnapPose3D, a pose-lifting framework trained deterministically to denoise 3D poses conditioned on both visual context and 2D pose features. SnapPose3D adopts a probabilistic approach during inference, generating multiple hypotheses through random sampling from a unit Gaussian distribution. Unlike most previous methods that address pose ambiguity by processing temporal sequences, SnapPose3D uses single frames as input, avoiding tracking and limiting computational cost, data acquisition complexity, and the need for online, real-time applications. We extensively evaluate SnapPose3D on well-known benchmarks for the 3D human pose estimation task showing its ability to generate and aggregate accurate hypotheses that lead to state-of-the-art results.