Robotics Systems

Generative robot policies typically begin action generation from an observation-independent standard Gaussian distribution, leaving the choice of source distribution underexplored. This work asks a simple question: where should action generation begin? We propose LeaP, a Learnable source Prior that replaces the standard Gaussian with a proprioception-conditioned diagonal Gaussian over action chunks. Parameterized by a lightweight MLP, LeaP jointly predicts the mean and state-adaptive variance of the source distribution, while keeping the downstream generator architecture and inference solver unchanged. This design provides an observation-informed yet stochastic initialization, allowing the generator to focus on precise action refinement rather than transporting samples from an uninformed noise source. On 15 RoboTwin manipulation tasks, LeaP achieves an average success rate of 81.6%, outperforming four representative baselines -- including deterministic-source methods, a no-prior counterpart, and a diffusion-bridge policy -- by 6.5 to 25.5 percentage points. The same prior consistently improves both flow-matching and diffusion-bridge generators, while using fewer parameters and converging faster. The advantage carries over to real-world deployment, where LeaP attains the best performance. These results suggest that the source distribution is an independent and reusable design axis for generative robot policies, complementary to the choice of generative dynamics.

Respiratory-rate (RR) monitoring is a critical component of remote triage and victim assessment in emergency response, disaster recovery, and infectious-disease scenarios, where minimizing physical contact can reduce responder risk and improve operational safety. However, field deployment of contactless RR monitoring remains challenging due to variable illumination, posture changes, platform heterogeneity, and the impracticality of wearable sensors in hazardous environments. In this paper, we present a modality-adaptive contactless RR monitoring framework for heterogeneous mobile robots with onboard edge computing. The proposed system combines brightness-adaptive sensor selection across RGB, thermal, near-infrared (NIR), and low-light cameras, keypoint-guided chest ROI extraction for posture-robust monitoring, and a signal-quality-index (SQI)-based filtering mechanism for reliable respiratory estimation. We implement and evaluate the framework on three robotic platforms spanning quadruped and wheeled locomotion and multiple edge-computing architectures. Experiments conducted across diverse lighting conditions, subject poses, and robot-to-subject distances demonstrate that the framework generalizes across platforms without per-platform algorithmic retuning, while revealing modality-specific operational boundaries. RGB provides the broadest coverage up to 8m, NIR remains effective up to 6m, thermal is reliable only at short range, and low-light sensing supports monitoring in complete darkness up to 8m. Overall, the results demonstrate the feasibility of multimodal contactless RR monitoring on mobile robots and support its use as a foundation for autonomous triage and victim assessment in hazardous search-and-rescue settings.

Robots operating in non-stationary environments must continually adapt their policies as the dynamics drift, but onboard energy and compute budgets cap how often a full state estimation and re-planning step can be performed. This raises a question: \emph{when}, along a horizon, should a robot spend its limited budget? We formulate this problem in time-varying Markov decision processes (TVMDPs) with a known bound on the rate of transition drift. We model execution as a \emph{skip-update} scheme in which, at chosen update times, the agent estimates the transition kernel by maximum likelihood and computes a finite-horizon policy, and between updates reuses this policy under a propagated state estimate. We analyze the dynamic regret of this scheme and show how it grows during skip intervals in terms of the properties of the TVMDP and the skip lengths; the resulting bound answers the opening question via an online, regret-guided update rule that allocates the budget adaptively. We evaluate the rule in a simulated Mars-rover navigation task with time-varying slip dynamics and on a Crazyflie quadrotor in indoor obstacle fields. Adaptive allocation outperforms other budgeted baselines.

We present Unified Motion-Action (UMA) Model, an approach that uses 3D object motion trajectories as a shared interface to bridge visuomotor control and dynamics modeling. UMA treats object motion and robot actions as co-evolving variables under a masked generative objective, in which the mask pattern determines both the supervision regime during pretraining and the inference mode at deployment. Using hindsight-relabeled motion contexts and a contrastive objective that disentangles task intent from scene geometry, UMA enables multi-task pretraining across heterogeneous data sources without requiring manually annotated task instructions. At deployment, the same pretrained parameters support motion-conditioned visuomotor control, motion-based dynamics modeling, and task adaptation from few-shot demonstrations. Pretrained on a mixture of robot demonstrations, human videos, and simulated data, UMA consistently outperforms state-of-the-art baselines specialized for each inference mode.

Foundation models are reshaping robotics by enabling robots to interpret open-ended instructions, reason over multimodal contexts, and operate in complex, open-world environments. However, their integration also introduces security and privacy (S&P) risks that extend beyond the FMs themselves to embodied execution pipelines, supporting ecosystems, and broader governance impacts. Existing literature reviews provide valuable insights but often focus on specific FM types, risk categories, mitigation strategies, or trust boundaries. Consequently, the field lacks a unified structure for analyzing where risks originate, how they propagate across robotic systems, and where mitigations should intervene. To address this gap, we propose a progressive F-E-S-G structural boundary framework for analyzing the S&P of FM-powered robots. The framework comprises four layers: the Foundation model layer (F), Embodied system layer (E), Supporting ecosystem layer (S), and Governance impact layer (G). Building on this structure, we develop a multi-level taxonomy that organizes prior studies along three levels: F-E-S-G trust boundary, security-privacy concerns, and risk-mitigation perspectives. We further annotate each study using fine-grained coding attributes, including target, lifecycle stage, mechanism, system access, and effect. Guided by this framework and taxonomy, we systematize 96 papers. Our analysis uncovers multiple threat patterns, defense mismatches, and evaluation gaps that are difficult to identify from a single-boundary perspective. Based on these findings, we identify open challenges and future directions to provide a research agenda for developing secure, privacy-preserving, and responsibly governed FM-powered robotic systems.

Learning-based manipulation policies have made substantial progress in real-world robot manipulation, particularly for short-horizon action generation. However, deployment in open workspaces remains fragile under unexpected local scene dynamics, such as moving objects, transient occlusions, or disturbances near the intended motion. Existing runtime monitors often rely on global observation anomalies, policy uncertainty, or frame-level visual changes, and struggle to distinguish task-relevant execution risk from benign visual variation. We introduce PATCH, an action-chunk-conditioned latent patch innovation monitor for deployment-time intervention. Given the active action chunk, PATCH defines a projected execution corridor, predicts latent patch evolution inside it, and accumulates persistent residuals unexplained by the robot's own motion. These residuals form a localized intervention signal that allows PATCH-Router to pause execution, select an available recovery source, and resume the original policy once localized innovation subsides. Experiments on real robot rollout data show that PATCH produces more stable and context-relevant triggers than competing runtime monitors. Real-robot deployment further demonstrates monitor-driven intervention and policy resumption for disturbance-aware manipulation. Project Page: https://yananzhou5555.github.io/PATCH/.

Robotic systems routinely encounter conflicting objectives, modeling errors, and degenerate contact conditions that render quadratic programs (QPs) infeasible. Yet most optimization solvers and differentiable QP layers assume feasibility, leading to numerical failures, unstable gradients, or solver breakdown when constraints cannot be simultaneously satisfied. We present Elastic ODYN, a primal--dual non-interior-point QP solver that handles infeasibility through smooth squared-$\ell_2$ elastic relaxations. The resulting formulation remains well posed under ill-conditioning and degeneracy, supports warm starting, and converges to closest-to-feasible solutions when no feasible point exists. A lightweight refinement stage recovers physically meaningful dual variables from the elastic solution. Building on this framework, we develop Elastic OdynLayer, a differentiable QP layer with stable gradients under infeasibility, and Elastic OdynSQP, an infeasibility-aware SQP method that resolves inconsistent subproblems and intrinsically infeasible optimal control tasks through selective constraint relaxation. We evaluate the framework on benchmark QPs, singular contact mechanics, differentiable parameter identification, and quadrupedal and humanoid trajectory optimization. Across all settings, Elastic ODYN consistently outperforms state-of-the-art elastic QP solvers in robustness, warm-start performance, and convergence reliability, enabling optimization, simulation, control, and learning beyond the feasibility assumptions of existing methods.

Collaborative mobile manipulation requires robots to coordinate with a partially observed partner while physically interacting through shared objects. This is difficult because failures often arise not from poor local skills, but from mistimed waiting, yielding, pulling, releasing, or repositioning. We study this problem with two bimanual mobile manipulators coupled through rigid and deformable objects. We propose Sequential Asymmetric Imitation (SAI), a single-teleoperator curriculum for learning coupled multi-robot behaviors without synchronized dual-operator demonstrations or explicit inter-robot communication. SAI trains Robot A from unilateral demonstrations with a compliant human partner, trains Robot B against the deployed Robot A policy, and then refines Robot A using sparse interventions near coordination failures. This staged process exposes the policies to increasingly realistic partner behaviors, including delay, phase mismatch,insufficient yielding, and interaction conflict. Across real-world dual-robot manipulation tasks, SAI improves task success, phase synchronization, and partner-contingent yielding over independent imitation and curriculum-ablation baselines. These results suggest that physically coupled collaboration can be learned through the structure of the imitation curriculum, rather than through synchronized multi-operator demonstrations or explicit coordination mechanisms. More videos on project page:http://cyc0429.github.io/sai-project-page/

The integration of augmented reality (AR) and EEG-based brain-computer interfaces (BCIs) offers a promising path for enabling intuitive control of robots for assistive purposes. However, existing AR brain-robot interface (BRI) systems are often constrained to task-specific structures, limiting their utility in real-world environments. We present an AR BRI designed for generalist robot arm manipulation that combines gaze-based object selection with motor imagery action control. Our system uses eye-tracking for intuitive object targeting and context-aware visual overlays ("Place" and "Use") to guide the user through tasks within a shared autonomy framework. We evaluated the interface through a feasibility study with 18 healthy participants performing three multi-step activities of daily living: drinking, using a drawer, and operating an oven. Our results demonstrate that this interaction paradigm enables effective sequential task execution and high user engagement, achieving a "Good" usability rating (SUS > 70). These findings support the feasibility of the proposed interaction paradigm for complex BCI-driven robotic assistance, and motivate future evaluation with the intended target population. Project website: https://ar-bri-manip.github.io/.

Reliable state estimation in robotics and control re quires balancing estimation accuracy against computational cost. While filtering-based methods such as the Extended Kalman Filter (EKF) provide efficient real-time updates, and optimisation based formulations using factor graphs improve global consistency, the role of optimisation scheduling is often treated implicitly rather than examined as an explicit design variable. This paper presents an experimental study that explicitly isolates optimisation scheduling using a Smart Scheduled Hybrid (SSH) EKF-FGO framework as a controlled testbed. By combining EKF-based state propagation with periodically invoked batch optimisation and holding solver structure and effort fixed, the main contribution of this work is the experimental characterisation of optimisation scheduling as an independent design variable governing the trade-off between intermediate estimation accuracy and computational cost. Simulation results in a planar SLAM environment show that scheduling strongly influences pre optimisation drift, transient error behaviour, and runtime. In particular, the results identify operating regimes in which most of the benefit of global optimisation can be retained at a fraction of the computational cost, highlighting optimisation scheduling as an under-explored yet critical consideration in hybrid state estimation systems.

Vision-Language-Action models (VLAs) leverage large-scale vision-language pretraining for semantic robot control, but often lack explicit foresight into how robot actions change the scene. World-Action Models (WAMs) address this limitation by conditioning policies on predicted futures, yet existing approaches typically rely on computationally expensive video generation with substantial pixel-level redundancy. We present LaWAM, a Latent World Action Model that exposes predictive dynamics to robot policies through compact latent visual subgoals instead of reconstructed future video. At the core of LaWAM is a latent-action-conditioned Latent World Model (LaWM). We obtain LaWM by training a latent action model in the latent space of a pretrained vision foundation model and repurposing its forward decoder to predict future observation features for scene evolution. LaWAM then conditions action generation on these predicted latent visual subgoals to enable dynamics-aware robot control. LaWAM achieves state-of-the-art or competitive success rates (SRs) across LIBERO (98.6% SR), RoboTwin (91.22% SR), and real-world manipulation tasks while retaining low-latency inference. LaWAM runs in 187 ms per action-chunk prediction and achieves up to 24x lower wall-clock latency than pixel-space WAMs.

Embodied reasoning requires models to perceive task-relevant objects and spaces in physical environments and maintain consistent visual grounding throughout multi-step reasoning. However, current vision-language models rely on text-only or coordinate-augmented chain-of-thought, where entity references remain implicit and ambiguous. This may cause the reasoning process to decouple from visual evidence, entity references to drift across steps, and a causal disconnection between the reasoning trajectory and the final answer, with these problems further amplified in multi-view scenarios due to cross-view appearance changes. To address these issues, we propose Pinned Chain-of-Thought (PinCoT), a structured reasoning paradigm that pins every reasoning step to visual evidence. PinCoT introduces the concept of reasoning anchor, which binds each task-relevant entity to a structured visual anchor with entity name, unique identity, view index, and spatial grounding, enabling consistent entity tracking across reasoning steps and views. We build a fully automated data generation pipeline to construct PIN-170K, a high-quality PinCoT-formatted reasoning dataset. We then train RoboPIN through three-stage post-training that progressively injects embodied knowledge, structured reasoning ability, and process-supervised alignment, with rewards that directly constrain both anchor localization and identity consistency during reasoning. On 14 benchmarks covering embodied spatial reasoning, multi-view reasoning, and pointing, RoboPIN with only 4B parameters consistently outperforms 7B level open-source embodied models, achieving a 12% average improvement over the strongest 7B baseline, Mimo-Embodied. Further analysis shows that PinCoT improves grounding accuracy and cross-step identity consistency, validating the effectiveness of process supervision.

The success of generative models in language and visual generation has inspired extensive applications to generative robot planning. However, most existing works either focus on single-robot planning, or generate multi-robot trajectories in a sequential manner with iterative post-processing to resolve inter-robot conflicts. In this work, we investigate whether coordinated multi-robot trajectories, as a special spatiotemporal distribution, can be learned and generated with a generative model in a feed-forward manner. We propose Robots as Tokens (Roken), a unified diffusion transformer that directly generates multi-robot trajectories that satisfy both (individual) safety and (global) connectivity constraints. The core design of Roken is to represent each robot as a discrete token, allowing them to naturally interact with each other through self-attention, and cross-attend to map tokens for environment layouts. We further introduce several auxiliary tasks based on Bayes' theorem to provide multi-scale spatial-temporal supervision for efficient learning of the conditional distribution. In training, Roken absorbs diverse expert trajectories from different team sizes. During inference, Roken behaves as a versatile multi-robot planner that can handle single-robot planning, coordinated multi-robot trajectory generation, and conditional trajectory generation by fixing some robot tokens as conditions. Experiments in diverse cluttered environments show that Roken can generate coordinated multi-robot trajectories to perform connectivity-constrained goal navigation tasks with high success rates, outperforming the baseline method used to generate the training dataset. Roken also demonstrates good scalability after training with mixed team sizes, and shows generalization to unseen or partially observed environments, verifying its potential to learn from diverse data and perform versatile tasks.

Robotic systems that assist humans should be capable of adapting their behaviors to individual user preferences. For instance, users may want a robot arm to adjust the amount of force it applies while folding their laundry or cleaning furniture. Natural language provides an intuitive way for humans to communicate such preferences. Recent progress in language-conditioned robot policies has shown that robots can successfully use language prompts to determine what task to perform. However, extending the same approach to realize how the task should be performed requires detailed labels describing the preferences or styles of trajectories in the task data. Not only is collecting such annotations challenging, but conditioning directly on these labels may also fail to provide fine-grained control over a continuous range of behaviors. For example, it can be difficult to convey the exact force that a robot must apply through abstract instructions like "apply a bit more pressure than before". Therefore, in this work, we propose using language to reason over preferred behaviors instead of directly generating them. We first learn a structured latent representation that organizes user preferences according to differences in the corresponding trajectories. Then, given a preference prompt, we use a foundation model to interpret this latent space and choose a value that produces the desired behavior. Through both simulation and real-world experiments, we show that selecting robot behaviors from an intuitively structured latent space enables more precise adaptation to user preferences while requiring significantly fewer preference labels than language-conditioned policies.

Socially assistive robots (SARs) are increasingly deployed in educational and information-sharing contexts, supported by advances in large language models that enable fluent real-time interaction. Despite the growing diversity of robot embodiments, it remains unclear whether a single robot appearance is appropriate across different interaction tasks or whether trust depends primarily on contextual factors. In this study, we examine how robot appearance and task type jointly influence trust in robots. Using a within-subjects video-based experiment (N = 81), participants evaluated three robots with distinct appearances while performing three educationally relevant tasks: teaching, procedural instruction, and personal-information discussion. Results from repeated-measures analyses show a strong main effect of task on trust, with participants reporting the highest trust during instructional guidance, moderate trust during teaching activities, and significantly lower trust when robots requested personal information. In contrast, robot appearance showed no significant main effect, and the interaction between appearance and task was marginal. These findings suggest that trust in human-robot interaction is shaped more strongly by task context than by physical embodiment alone. By focusing on future educators as end users, this work contributes empirical evidence toward task-aware robot deployment in educational environments and highlights the importance of aligning robot roles and behaviors with interaction goals rather than relying solely on anthropomorphic design.

The recent popularity of robotics, combined with the steadily decreasing cost of robotic hardware, has lowered the entry barrier to robotics research and enabled rapid advancements in the field. One of the primary examples is the Unitree Go2 quadruped robot, which is often used by researchers in the areas of locomotion, navigation, control, and others. Many researchers use the Go2 robot in combination with techniques like imitation learning, reinforcement learning, and behavioral cloning to allow machine learning systems to take full control of the robot. At the same time, many of those techniques require demonstration data consisting of the robot's kinematics information and actions applied to the motors. Obtaining such data is difficult, requires building complex pipelines, and can take significant time. To aid in those kinds of efforts, we present Kine2Go - a dataset with 800 diverse gait kinematics trajectory motion data for the Unitree Go2 robot, derived from 40 distinct policies. Our pipeline accepts data from various quadruped morphologies and translates them to a Go2-compatible format. Then we use Reinforcement Learning to train policies following a given motion, and finally we gather data from those policies, which grants robust, perturbed kinematic data with corresponding motor-level actions.

In this report, we present Hy-Embodied-0.5-VLA, abbreviated as HyVLA-0.5, an end-to-end system that spans the full robot learning stack: data collection, model design, continued pre-training and supervised fine-tuning, RL post-training, and real-world deployment. Each component serves a distinct role in this stack.

In this paper, we propose a method that applies Inertial-Leg (IL) tokenization to an attention-based network for proprioceptive state estimation in legged robots. Unlike existing learning-based state estimators that concatenate all sensor measurements into a single flat vector, the proposed architecture represents inertial measurements and leg-wise measurements as individual tokens and uses an attention mechanism to learn the relative importance of each measurement.This design allows the network to reweight each measurement according to the current contact condition, reflecting the fact that the reliability of forward kinematic measurements depends on whether the corresponding foot is in contact. Unlike conventional contact-aided estimators, however, the proposed method learns this behavior without relying on an explicit contact estimator or on explicit measurement updates based on a stationary contact assumption. To validate the proposed method, we conducted experiments on a Unitree Go1 robot, including debris terrain not modeled in simulation and gait patterns not seen during training. Experimental results show that the proposed method achieves better estimation performance than existing learning-based state estimators under unseen gait patterns and also improves performance over contact-aided model-based methods.

Robotic apple harvesting offers a promising solution to labor shortages in commercial orchards, but low throughput and poor performance in orchard environments hinder its commercial adoption. This paper presents a modular dual-arm apple harvesting robot that uses a vertically stacked arms to enable simultaneous operation in the upper and lower zones of a single tree, simplifying platform positioning from multi-tree lateral repositioning to single-tree stops. Compared to our prior horizontal dual-arm system, the platform integrates 5 advances: (1)a foundation-model-based perception pipeline combining Grounding-DINO and EfficientViT-SAM for robust fruit localization in unstructured outdoor environments; (2)7th-order jerk-bounded trajectory generation paired with a Control Barrier Function safety filter to achieve fast yet safe arm motions; (3)a linear sweep harvesting strategy with a 10cm approach buffer and rotational detachment that improves picking reliability; (4)a temporal-logic-based dual-arm coordination policy with vision-arm async scheduling that maximizes usage of a shared vacuum source; and (5)field validation in 2 commercial orchards covering different apple varieties and tree architectures during the 2025 harvest season. Across the 1738 arm cycles collected in these field trials, the system achieved an 80.0% per-attempt success rate and a mean per-arm cycle time of 7.53s. Fruit damage assessments confirmed that 91.2% of robotically harvested fruit retained the highest USDA grade (Extra Fancy), with bruise rates between 2.4% and 4.9%. With further improvements in the picking cycle time and handling of heavy foliage occlusions, this new modular robot design holds promise for commercial harvesting of apples.

The potential impacts of world models (WMs, i.e., learned simulators) on robotics are far-reaching -- policy evaluation, policy improvement, and test-time planning -- all with limited real-world interaction. To unlock these downstream capabilities, a WM needs to jointly satisfy three desiderata: $\textit{(i)}$ fidelity (i.e., producing simulated trajectories that correlate with reality), $\textit{(ii)}$ consistency (i.e., producing simulated trajectories that are coherent over long horizons), and $\textit{(iii)}$ efficiency (i.e., producing simulated trajectories quickly). We propose WEAVER (World Estimation Across Views for Embodied Reasoning): a WM architecture that simultaneously achieves all three desiderata, providing state-of-the-art results on robotic manipulation tasks. WEAVER is a multi-view WM trained to predict future latents and reward values via a flow-matching loss. We distill the key design decisions across model architecture, memory, and prediction objectives required to unlock the kinds of long-horizon dynamic manipulation tasks that have confounded prior world modeling approaches. We apply WEAVER in robotic hardware, demonstrating its effectiveness at policy evaluation ($ρ$=0.870 correlation with real-world success rate), policy improvement (real-world success rate improvement of $38\%$ on top of the $π_{0.5}$ robot foundation model), and test-time planning (real-world success rate improvement of $14\%$ with a $5-10\times$ speedup over prior WMs). WEAVER also demonstrates better performance than prior WMs when evaluated on out-of-distribution scenarios. Code, models, and videos at: https://arnavkj1995.github.io/WEAVER/ .

Scientific laboratories increasingly rely on AI systems to reason about experiments, but the physical act of doing science remains largely outside their reach. AI can help read literature, generate hypotheses, and plan protocols, yet the execution of those protocols at the bench still requires a human operator. Vision-Language-Action (VLA) models provide one possible interface between written protocols and robot execution, but existing policies are trained mostly on household and tabletop demonstrations and rarely encounter the instruments, transparent liquids, or fixed protocol workflows found in scientific laboratories. Closing this gap requires both laboratory-specific supervision and a unified learning framework that can accommodate the diverse robot embodiments used to execute experimental protocols. We therefore identify data and embodiment as central bottlenecks alongside model design. To address the data side, we build RoboGenesis, a simulation-based workflow and data engine that composes configured laboratory workflows from atomic skills, validates and filters rollouts, and exports structured demonstrations across supported robot profiles. On the policy side, we present LabVLA, trained with a two-stage recipe: FAST action token pretraining first makes the Qwen3-VL-4B-Instruct backbone action aware before any continuous control is learned, and flow matching posttraining then attaches a DiT action expert under knowledge insulation. On the LabUtopia benchmark, LabVLA achieves the highest average success rate among all evaluated baselines under both in-distribution and out-of-distribution settings.

Curvature of planar curves serves as a key regularization term for computing second-order minimal paths, due to its tight relevance to desirable geometric properties such as smoothness, rigidity, and elasticity. In this paper, we tackle a more challenging problem in computational physics and geometry problem: tracking minimal paths whose curvature is constrained by arbitrary upper and lower bounds. For that purpose, we propose a new curvature-bounded geodesic model, developed under the Hamilton-Jacobi-Bellman (HJB) partial differential equation (PDE) framework. It provides strong geometric control over minimal paths by enforcing curvature range constraints, whose paths are smooth and of bounded curvature limitation. We also present a discretization scheme for the Hamiltonian and the HJB PDE incorporating curvature bounds, allowing efficient solver for estimating numerical solutions to the model. Finally, we illustrate the capability of the proposed curvature-bounded geodesic model in applications of robot path planning and curvilinear structures tracking from images. Numerical experiments demonstrate that the proposed curvature-bounded geodesic model serves as a powerful and robust tool for finding satisfactory paths.

Existing stretch and touch sensors for robots are generally expensive with respect to at least one of material costs, required manufacturing equipment, or manufacturing time. We present and experimentally characterize a conductive fiber made using only inexpensive commercial off-the-shelf parts (conductive thread at $0.07/ft, silicone tubing at$0.94/ft) and tools (loop-style needle threader at $2), which can be manufactured quickly (20 cm length in 2 minutes.) We demonstrate its use as a resistive strain sensor with three applications: Triggering a grasp in a pneumatically actuated assistive finger, sensing the pose of a pneumatically actuated robotic strap, and estimating the pose of a flexible solid. We also demonstrate that it can be used as a capacitive sensor with two applications: First, as a touch sensor which triggers a commercial robot arm to move, and second, as a near-field sensor enabling the robot arm to follow a moving hand. The capacitive sensors are knitted, showcasing the high flexibility of the fiber. We discuss methods for improving manufacturing scalability and their cost trade-offs. Finally, we demonstrate a method for repairing a cut fiber.

In bimanual robotic manipulation, task-relevant visual information varies with the task stage and context, while the interaction of the two arms shifts between independent and coordinated modes, making policy learning challenging. However, existing monolithic VLA policies typically process multi-view observations and distinct bimanual interaction patterns without explicitly adapting their visual conditioning or action-generation structure. To address this issue, we propose a bimanual manipulation VLA framework based on Dual-Level Structural Decomposition. The View-Selective Visual Router dynamically adjusts wrist-view contributions to emphasize relevant visual cues, while the Interaction-Aware Action Mixture-of-Experts decomposes action generation into coordinated and arm-wise pathways to adapt to varying bimanual interaction modes. We evaluate the proposed method on six simulated bimanual manipulation tasks in RoboTwin 2.0 and three long-horizon real-world tasks. Our model improves the overall average success rate over a monolithic baseline by 27.7% in simulation and 43.3% in real-world evaluation, while consistently outperforming single-module variants across both settings. These results demonstrate that jointly considering selective visual processing and explicit decomposition of bimanual interaction structures provides an effective inductive bias for robust bimanual manipulation.

Distinguishing self from others is a prerequisite for social intelligence, yet humanoid robots that increasingly share workspaces with humans still lack this ability. Here we show that a humanoid robot can learn self-other distinction from proprioceptive-visual correspondence, without any identity labels or kinematic models. Once established, this distinction bootstraps a predictive self-model that maps joint configurations to three-dimensional body occupancy, capturing how the robot's body changes with action. In multi-agent scenes involving humans or morphologically identical robots, the system reliably identifies itself, learns a 3D self-model, and supports downstream tasks including target reaching, collision-aware motion planning, and human-to-robot motion retargeting. Together, these results outline a route toward bodily self-representation in robots that act and coordinate alongside others in shared physical environments. Project page: https://euron-zc.github.io/humanoid-self-model/.

Human-Robot Collaboration (HRC) requires strict adherence to safety standards, such as ISO 10218, to prevent harmful interactions. Standard Speed and Separation Monitoring (SSM) filters calculate safe robotic speeds based on conservative assumptions, such as constant human velocity, which prevents accurate predictions of minimum separation distances and causes unnecessary operational halts. This paper proposes a Control Barrier Function (CBF) that explicitly incorporates human acceleration data to analytically forward-predict the minimum human-robot separation distance during a worst-case robotic stopping trajectory. To guarantee safety at the control level, this predictive CBF is integrated as an inequality constraint within a Sequential Quadratic Programming (SQP) framework. Specifically, two methods are proposed: Method I, a CBF-constrained PD safety filter; and Method II, a task-scaling SQP controller that enforces a spatial tube constraint. Simulated and real-world experiments on a UR10e robot evaluate the two proposed methods against a standard industrial SSM module baseline. Results demonstrate that Method II dynamically modulates execution speed and confines spatial deviations. Compared to Method I, Method II achieves a 63% reduction in mean trajectory error and avoids excessive evasive manoeuvres, ensuring high task throughput while complying with ISO 10218 SSM guidelines.

Quadruped robots are capable of traversing a wide range of complex terrains with high flexibility. As highly mobile ground-based intelligent platforms, they can be equipped with modules for navigation control, environmental perception, and intelligent interaction, thereby serving as real-world mobile deployment platforms for various algorithms. In this paper, we introduce Y-BotFrame, an extensible embodied platform that turns a robot into an intelligent ground assistant. Y-BotFrame integrates multimodal perception capabilities, including speech, vision, and LiDAR, and employs a large language model as the cognitive core for environmental understanding, contextual reasoning, and task planning. The system maps user natural-language instructions into executable embodied task units that can be carried out by the robot. Y-BotFrame supports natural interaction through voice commands and visual feedback, removing the need for a remote controller and enabling efficient human-robot collaboration. With a highly extensible framework, Y-BotFrame supports plug-and-play integration of new functional modules as well as modular upgrades and iterative development, offering a reference implementation for the real-world deployment of general-purpose, instruction-driven embodied agents.The supplementary video is available at https://xdei-group.github.io/Y-BotFrame/.

Vision-language-action (VLA) policies bring natural language into closed-loop robot control, enabling robots to execute manipulation tasks directly from text instructions. The same interface gives text a recurring role in control because the prompt is reused at every replanning step, and each prompt-conditioned action changes the future observations on which the policy acts. Existing VLA attacks study adversarial prompts that elicit targeted low-level actions or make such actions persist across changing images. We identify a stronger trajectory-level failure mode: a prompt that still $\textit{appears}$ to specify the intended task but redirects the final physical outcome. We mathematically formalize this setting as $\textit{command-preserving trajectory redirection}$, a prompt-only threat model in which the attacker chooses one prompt before the episode, all policy and environment components remain fixed, and the prompt must stay close to the benign instruction while omitting target words and correction language. To find such prompts, we introduce an on-policy prompt search method that uses rollouts to discover perturbations whose closed-loop behavior tracks a target task while satisfying the command-preserving constraints. Experiments in simulation and on hardware show that near-benign prompt perturbations can redirect VLA rollouts to attacker-specified targets. These results expose a trajectory-level vulnerability in VLA instruction grounding: text that appears to preserve the intended command can still give an adversary control over the robot's final physical outcome. Project website: https://vla-redirection-attack.github.io/

Dexterous manipulation is limited by the cost of collecting large-scale robot demonstrations. Egocentric human videos offer a scalable source of diverse manipulation behaviors, but directly using them for robot learning requires bridging two gaps: the visual gap between human and robot observations, and the action gap between human motion and robot-executable action. We propose EgoEngine, a scalable framework for transforming egocentric human manipulation videos into high-fidelity robot data. Given an egocentric RGB video, EgoEngine produces: (i) a high-fidelity robot observation video replacing human with robot while preserving scene context and temporal alignment, and (ii) a task-aligned, executable robot action trajectory under feasibility constraints. Experiments in simulation and on real robots show that EgoEngine enables scalable conversion of human videos into robot data and, to our knowledge, demonstrates the first zero-shot visuomotor dexterous policy learning from egocentric human videos without real-robot demonstrations. Project website: https://egoengine.github.io.

Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

Physiological awareness is important for service, social, and assistive robots that interact with humans in everyday environments. Remote photoplethysmography (rPPG) enables non-contact heart-rate (HR) estimation from an RGB camera, making it a promising sensing modality for robot-mounted vision systems. However, illumination variation remains a major barrier to robust deployment. This paper presents an end-to-end spatial-temporal transformer framework for remote HR estimation on a new dataset with varied illumination. Our estimator integrates PRNet-based 3D face alignment, clip-level illumination augmentation, the Residual Temporal Standardization Module, and controlled hybrid temporal-frequency supervision. The training objective combines a Soft-Shifted Pearson waveform loss with a spectral Kullback-Leibler divergence loss, where a tuned weight ($\mathbfβ$) controls the contribution of frequency-domain heart-rate guidance. Experiments on a static all-level mix protocol covering three illumination levels show that $\mathbfβ=5$ provides the strongest result among the tested beta settings, achieving a best-run HR mean absolute error (MAE) of 0.79 bpm and an HR correlation of 0.982. Compared with the PhysFormer baseline evaluated on our dataset, our estimator reduces HR MAE by 93.6 %, while increasing HR correlation from 0.088 to 0.982, making it usable when illumination varies.

We propose Ambient Diffusion Policy, a simple and principled method for imitation learning from suboptimal data in robotics. High-quality, task-specific robot data is expensive and time-consuming to collect, while suboptimal datasets with lower-quality or out-of-distribution demonstrations are abundant. Existing methods that co-train on both data sources in robotics often fail to separate the meaningful and the harmful features in the suboptimal samples. In contrast, our method extracts only the useful features by introducing a new axis to co-training in robotics: noise-dependent data usage. Ambient Diffusion Policy restricts the contribution of suboptimal data during training to only the high and low diffusion times. To rigorously justify our approach, we first observe that robot action data exhibits a spectral power law. This induces two important properties on the optimal Diffusion Policy that we exploit: a global-to-local hierarchy and locality. We theoretically formalize this discussion using a simplified model. Our experiments validate Ambient Diffusion Policy on four types of suboptimal action data (noisy trajectories, sim-to-real gap, task mismatch, and large-scale data mixtures) across six tasks. The results show that it effectively learns from arbitrary sources of suboptimal data. Notably, it outperforms existing co-training baselines by up to 33% when scaled to Open X-Embodiment - a large dataset with heterogeneous data quality and unstructured distribution shifts. Overall, Ambient Diffusion Policy increases the utility of suboptimal demonstrations and expands the set of usable data sources in robotics.

Accurate identification of hydrodynamic derivatives is essential for precise control and autonomous navigation of Unmanned Surface Vehicles (USVs). However, acquiring high-fidelity manoeuvring data from physical sea trials is often constrained by cost, safety, and environmental disturbances. Standard manoeuvring trials, particularly Turning Circle (TC) and Zig-Zag (ZZ), remain fundamental to IMO and ITTC assessment procedures because they provide comparable performance metrics reflective of underlying hydrodynamic behaviour. This paper extends the open-source Marine Robotics Unity Simulator (MARUS) by introducing a standardised Virtual Sea Trial framework for automated execution and data generation of TC/ZZ manoeuvres. The framework provides traceable command-actuation logging, system-identification (SI)-focused data conditioning, and automated extraction of IMO/ITTC-aligned manoeuvring metrics. A key contribution is a dedicated TC/ZZ data acquisition and post-processing pipeline, improving the repeatability and auditability of simulator-based manoeuvres while producing SI-ready datasets for hydrodynamic-derivative identification and digital-twin workflows. The framework also provides explicit command-execution separation for differential-thrust steering, where manoeuvre inputs are recorded as ordered rudder-equivalent commands and realised actuation is logged as an execution-level proxy derived from applied thrust. Case study results demonstrate repeatable and IMO-compliant manoeuvre behaviour. For TC tests, the normalised advance differs by approximately 3.9% between port and starboard turns, while the tactical diameter differs by 4.6-4.7%. For ZZ tests, first and second overshoot excesses remain below 1 degree for both +/-10-degree and +/-20-degree manoeuvres, satisfying IMO criteria, while peak yaw rates range from approximately 4.1 to 5.8 degrees/second.

This paper presents the design, development, and experimental verification of PEBRE, an open-hardware add-on for fast software development on the Pepper Robot. Our project enhances Pepper's computational and perception capabilities by integrating external components such as a Jetson Orin Nano, Logitech BRIO, Intel RealSense D435i, Samson UB1, and RØDE VideoMicro II. Our results show that the new hardware considerably improved Pepper's perception abilities and computational power. This development contributes to the community by implementing an open hardware and open-source modular add-on to the Pepper robot and keeping this relevant research platform functional beyond its expected lifespan. With PEBRE, we aim to facilitate faster software development and more efficient integration of external components, ultimately enhancing the capabilities of the Pepper robot.

Generalizable robot manipulation requires not only task-level reasoning over unseen scenes, but also reliable grounding of visual plans into embodiment-specific execution. To bridge this gap, we propose VICX (Video generation and In-Context eXecution), a decoupled closed-loop manipulation framework. In VICX, a frozen video generation model produces vision-language-conditioned high-level visual plans, while a Video-to-Trajectory In-Context Operator Network (V2T-ICON) serves as the task-agnostic interface that grounds these plans into executable robot-state trajectories. To improve execution generalization, V2T-ICON operates on segmentation-extracted arm-only frame observations and uses retrieved image-state pairs as in-context prompts, allowing a robust and generalizable visual-to-state mapping at inference time without parameter updates. Experiments on Meta-World show that VICX supports cross-task generalization, closed-loop self-correction, and cross-embodiment transfer, demonstrating dual generalization across both task semantics and robot execution. The project webpage can be found here: https://scaling-group.github.io/vicx/.

While commonsense knowledge may suffice for virtual agents, embodied robots interacting with humans require grounded and semantically rich representations of both their environment and their own physical embodiment. In cognitive robotics, ontologies are effective for integrating such heterogeneous knowledge to enable explainable reasoning, even during continuous knowledge updates. Yet, their manual construction remains a bottleneck. We present a preliminary approach for the automatic generation of robot semantic abstractions by transforming Unified Robot Description Format (URDF) models into populated ontologies. Although URDF files provide structural and kinematic descriptions, their identifiers often require commonsense interpretation to recover meaningful semantics, a task at which Large Language Models (LLMs) excel. Our pipeline leverages LLMs to infer semantic relationships by prompting them with concepts from an existing ontology, ensuring the final classification remains aligned with the formal model. To improve reliability, the pipeline combines majority voting across multiple LLM queries along with syntactic and schema-level validation to ensure that generated outputs conform to the expected representation format and ontology constraints. We evaluate the approach on multiple robot descriptions and discuss the generated abstractions. Initial results indicate that the proposed method can effectively bridge the gap between low-level robot descriptions and the structured, grounded knowledge representations required for human-robot interaction.

Most existing drone-based inspection systems require the drone to fly dangerously close to the target or follow complex flight paths to capture small details. In addition, drone flight is affected by disturbances and localization inaccuracies, which can cause the drone to lose sight of its supposed target when it has a narrow view. Furthermore, trajectory planning often requires prior information about the target's geometry, position, and orientation, which is not always available for non-structural targets such as trees, vehicles, or people. To address these challenges, this paper presents aerial_micro_inspection, a generic pipeline for aerial micro-inspection across different use cases. The pipeline assumes a PX4-powered drone equipped with two cameras: (i) a zoomed, gimbal-mounted inspection camera that captures fine details without requiring the drone to fly very close to the target, and (ii) a wide-field-of-view stereo navigation camera that acquires the target surface on site, estimates its range, and partitions it into smaller inspection regions. In addition, a vision-based feedback loop compensates for drone motion while the inspection camera visits small partitions of a larger surface. We evaluate the pipeline in simulation and real-world experiments, mainly in two use-case scenarios: tree inspection for detecting oak processionary caterpillars and their eggs, and greenhouse inspection of sticky traps for detecting whiteflies. The results show improved coverage robustness under drone disturbances in simulation, as well as effective detection of caterpillars and eggs and high-detail imaging of insects in real-world experiments. The pipeline is open-source, developed in ROS 2, and can be adapted to new applications by replacing the surface-segmentation and micro-target detection checkpoints. The code is available at: https://github.com/SaxionMechatronics/aerial_micro_inspection

Generative design of robots requires navigating a vast search-space, encompassing physical configurations and behavioural parameters. Evolutionary Algorithms (EAs) have shown promising results, but often converge prematurely to a small set of sub-optimal designs. Most EAs fail to maintain sufficient diversity in the population that would allow the discovery of distinct functional robots. To counter premature convergence, we introduce a superquadrics-based representation (SQs) for robot bodies. SQs are interpretable, compact and computationally efficient mathematical representations of 3D geometrical shapes that can be tuned to specific design-spaces. To encourage morphological diversity, we combine this representation with a quality-diversity (QD) algorithm (MAP-Elites). We compare SQs and Compositional Pattern Producing Networks representations as generators of morphologies, combining them with standard EAs and MAP-Elites. In two test environments, we find that using SQs to generate morphology in conjunction with the MAP-Elites algorithm reaches the highest QD-score across both environments, maximising diversity of design and functionality of generated robots. The findings highlight the benefits of using a compact and interpretable geometric representation for exploring a complex design-space and suggest that combining SQs with an explicit diversity mechanism increases the quality and number of designs generated.

Precise state estimation for navigation of autonomous agricultural robots is often compromised by sensor outages (GNSS/LiDAR/Visual) and high-frequency vibrations inherent in off-road environments. This paper proposes a robust navigation algorithm based on a jerk-augmented Extended Kalman Filter (EKF) integrated with a Multiple Tuning Factor (MTF) adaptation method. Unlike standard EKF approaches that assume constant measurement noise, our method dynamically adjusts the measurement covariance matrix in real-time, allowing the system to cope with sudden disturbances and sensor outliers. We evaluate the algorithm using real-world data from a Salin247 autonomous robot. Results demonstrate that jerk-augmentation combined with MTF adaptation significantly reduces 3D position Root Mean Square Error (RMSE) compared to baseline EKF models, providing superior dead-reckoning capabilities.

The recent trend in scaling models for robot learning has resulted in impressive policies that can perform various manipulation tasks and generalize to novel scenarios. However, these policies continue to struggle with following instructions, likely due to the limited linguistic and action sequence diversity in existing robotics datasets. This paper introduces Task Robustness via Re-Labelling Vision-Action Robot Data (TREAD), a scalable framework that leverages large Vision-Language Models (VLMs) to augment existing robotics datasets without additional data collection, harnessing the transferable knowledge embedded in these models. Our approach leverages a pretrained VLM through three stages: generating semantic sub-tasks from original instruction labels and initial scenes, segmenting demonstration videos conditioned on these sub-tasks, and producing diverse instructions that incorporate object properties, effectively decomposing longer demonstrations into grounded language-action pairs. We further enhance robustness by augmenting the data with linguistically diverse versions of the text goals. Evaluations on LIBERO demonstrate that policies trained on our augmented datasets exhibit improved performance on novel, unseen tasks and goals. Our results show that TREAD enhances both planning generalization through trajectory decomposition and language-conditioned policy generalization through increased linguistic diversity.

We present a generalist position control policy capable of controlling arbitrary multirotor configurations of a certain rotor count (e.g., hexarotors or quadrotors) with a single set of network weights. The policy is conditioned on a physics-grounded embodiment descriptor: a mass and inertia-normalized control allocation matrix that captures how mass-normalized motor thrusts generate linear and angular accelerations in the body-frame. To train the policy, we sample from a broad distribution of arbitrary multirotor configurations, including non-planar and asymmetric systems, and optimize a single, compact network using Proximal Policy Optimization. Training requires only five minutes on an RTX 3090 GPU using a custom NVIDIA Warp-based dynamics simulator. Through extensive simulation experiments, we show that embodiment conditioning enables robust generalist control across arbitrary morphologies. We demonstrate zero-shot real-world transfer of this generalist policy on three diverse hexarotor systems, including a planar robot, a partially symmetric non-planar system, and a random asymmetric, non-planar configuration.

Robot Operating System 2 (ROS 2), the de facto standard middleware framework for robots, runs each robot as a graph of nodes communicating over the Data Distribution Service (DDS), a publish/subscribe substrate. Observing this inter-node communication in real time is essential to robot development, yet it has a price. A tool can receive data only by joining the DDS domain as a subscriber that discovery has matched to the publisher, so observing folds the tool into the system it measures and perturbs it. We define this protocol-inherent perturbation as the observer's probe effect. It inflates the discovery plane, adds deserialization cost on the observer, makes the loss it reports diverge from what the subscriber actually received, and near saturation displaces the subscriber's messages. The only escape, capturing all wire traffic passively, discards ROS 2 message semantics and scales with total traffic, not what is observed. We present ros2probe, a non-intrusive observation framework that removes the probe effect. It reconstructs the full ROS 2 communication state from the domain's discovery packets at no bandwidth cost, then drives an in-kernel filter restricted to the topics the user asks for, lifting only those packets at minimal cost and observing what the real subscriber receives. Its interfaces and recordings match the standard ROS 2 tools. Across three hardware platforms (laptop, Jetson, and Raspberry Pi), two DDS implementations, and seven robot-operation workloads, ros2probe holds the discovery graph within 0.5% of an unobserved system, whereas domain-joining tools inflate discovery up to 2.6$\times$ and drop 38.5% of the subscriber's messages at saturation while ros2probe drops none. It reports loss with a recall of 1.0, cuts observer CPU and memory by up to 7$\times$ and 28$\times$, and stays practical on the embedded robots where existing tools overload the system.

Deploying Vision-Language-Action (VLA) models in real robotic systems requires robustness not only to semantic and perceptual variations, but also to embodiment-side faults that change how actions are physically realized. Real robots can experience joint-level changes caused by actuator degradation, hardware faults, safety limits, collision damage, or wear-induced friction. These faults are critical because they alter the action-to-motion interface of a policy, disrupting the learned closed-loop relationship between commanded actions, realized motion, and subsequent observations. In this work, we study realistic joint-level physical faults and show that VLA models are vulnerable when predicted actions are executed through a perturbed robot body. Our analysis reveals joint-dependent effects, with heterogeneous degradation in task success across affected joints. We also show that performance drops cannot be attributed solely to physical infeasibility, since feasible faults such as increased joint friction can still substantially reduce success rates and induce closed-loop execution mismatch. Motivated by these findings, we propose Joint-level Physical-fault Aware Residual Calibrator (J-PARC), a lightweight residual calibration framework built on top of a frozen VLA policy. J-PARC infers a latent joint-fault regime from recent joint dynamics and conditions a shared residual calibrator on this regime, enabling adaptive action correction across faulty joints. Experiments show that J-PARC improves robustness under joint-level faults while preserving fault-free environment performance.

Safe social navigation requires robots to distinguish people from ordinary obstacles and to react before danger becomes imminent. We show that pretrained Vision-Language-Action (VLA) models already encode pedestrian-object distinctions and future collision signals in their internal representations, but behavior cloning fails to translate these signals into socially appropriate actions. To address this mismatch, we propose SALSA, a two-stage annotation-free post-training framework: (1) social behavioral alignment bridges intermediate-layer social features to the action head and trains on counterfactual human-object scene pairs to break visual saliency shortcuts; (2) temporal safety alignment provides automatically generated future-risk supervision to enable anticipatory collision avoidance. On SCAND and real-world deployment, SALSA reduces near-collisions by 86.4% and improves social counterfactual accuracy from 53% to 93%, demonstrating that safer social navigation can be achieved by teaching VLA policies to act on representations they already possess. These results show that pretrained VLA policies can be adapted for safer social navigation by better aligning their latent representations with action generation.

Hierarchical vision-language-action (Hi-VLA) systems have emerged as a promising paradigm for complex robot manipulation, by using high-level VLM planners to decompose tasks into language subgoals executed by low-level VLA controllers. Despite recent empirical progress, there is a lack of unified design principles for these systems: existing Hi-VLA systems differ in how they choose and connect planners, controllers, mechanisms to switch between the two, and how observations and memory are represented in the planner. In this paper, we present a systematic study of Hi-VLA design for robot manipulation. We unify representative Hi-VLA agents under an options-style control framework and benchmark core design choices across short-horizon, long-horizon, and reasoning-intensive tasks. Our analysis distills practical principles for building Hi-VLA systems, showing how model choices and interface mechanisms jointly shape performance. Applying these principles yields a substantially stronger system than either flat VLA control or a naively designed hierarchy, across experiments both in simulation and on a real ALOHA robot. Overall, our results provide a foundation for building more capable, robust, and principled hierarchical VLA agents. More information and video at jiahenghu.github.io/hi-vla.

Demand for older-adult and patient care is growing rapidly as populations age worldwide. Foundation models are increasingly being integrated into robots and interactive agents, with the promise of more flexible communication and personalized assistance. However, care settings require reliable and workflow-compatible systems with accountable human oversight, and it remains unclear whether current embodied systems can translate technical advances into clinical impact. This Perspective synthesizes foundation model-based care robots across three areas: design features, user experience, and evidence for care-related outcomes. Current systems most commonly use foundation models as conversational and reasoning layers within voice-centered socially assistive embodiments, while multimodal grounding and physical autonomy remain limited. Empirical evaluations report positive usability and engagement benefits, but reliability failures persist across the interaction pipeline such as hallucinations and conversational breakdowns. Evidence for care impact remains concentrated in proximal outcomes such as cognitive engagement and participation, with limited evidence for validated clinical or care-related changes. We argue that future research should transition toward care-specific evaluation standards, accountable autonomy, and integration into care workflows to support more responsive and responsible care technologies.

We introduce flow control of vision-language-action (VLA) models, a simple and effective way to steer VLA actions in real-time through generic inputs, such as a keyboard. This method can be used out-of-the-box and does not require retraining or fine-tuning VLAs. It enables relatively crude user inputs to steer a VLA to align with user intent. The VLA transforms these inputs into action samples drawn from the VLA expert action distribution learned during training, so that the generated actions are high quality (conformity to the action expert distribution) and high fidelity (reflecting the user's intent). We demonstrate that flow control has many desirable properties: (1) flow control accurately and responsively steers robot actions with user inputs, (2) it is robust to suboptimal user inputs, (3) it enables users to steer VLAs to achieve significantly higher success rates and faster task completion, and (4) fine-tuning a VLA on flow control trajectories improves the autonomous policy. Together, these results provide a simple and intuitive way for users to help steer VLA actions, increasing task performance.

We present GHOST, a framework for learning visuomotor manipulation policies that generalize beyond the training distribution. GHOST factorizes control into (i) a high-level policy that predicts the next sub-goal as a distribution over 3D end-effector poses from multi-view RGB-D observations, and (ii) a low-level goal-conditioned controller that executes embodiment-specific actions. To condition image-based policies on 3D goals, we introduce a simple spatial interface that projects predicted goals into the image plane and represents them as end-effector heatmaps. Across a suite of manipulation tasks, this hierarchical factorization consistently improves performance and robustness compared to a flat Diffusion Policy. Further, we show that this hierarchical interface also makes it easy to incorporate human demonstrations without relying on (noisy) action retargeting. As sub-goals are largely embodiment-agnostic, we train the high-level policy on human video to specify how learned skills should be applied and composed, while keeping the low-level policy trained purely on robot data. This hierarchy enables adaptation to novel objects and task variations using a small number of human demonstrations.

Force and tactile sensing are indispensable in contact-rich manipulation. However, force-aware robot learning faces critical challenges due to the incompatible assembly of tactile and force sensors in handheld or wearable devices. To address these limitations, we first introduce AetheRock for gripper-force, vision, and tactile data collection, which is an arm-worn device featuring a modular and easily manufactured visuo-tactile sensor, GelSlim-MiniFab, at the fingertip, a resistive pressure sensor at the human finger contact region, a customized PCB module, and a wearable kit for comfortable and robust collection. Building on this, we propose ForceVT, a representation learning framework that uses force and vision to guide fidelity-agnostic tactile learning, enabling robust inference in any tactile situation. Real-world experiments show that AetheRock achieves qualified data efficiency and that ForceVT effectively alleviates inefficiencies when visuo-tactile sensors exhibit manufacturing and utilization inconsistencies. Overall, our work mitigates the limitations of gripper-force vision-tactile robot learning through innovative hardware design and algorithms.

Planning collision-free motion for large robot fleets is difficult because collision avoidance induces strong inter-agent coupling that grows rapidly with team size. We consider omnidirectional floating robots on water, where choreographies are specified by sparse keyframes and an interactive tool must generate trajectories within seconds, even when transitions span minutes and thousands of time steps. We propose a scalable pipeline that builds a collision graph from an initialization, decomposes the coupled problem into interaction clusters, and solves clusters independently (and in parallel) with robustness mechanisms for common decomposition pathologies. We validate the approach in simulations up to 500 robots. The synthesized trajectories have also been deployed in two real-world demonstrations, on Lake Zürich with a fleet of 24 Way of Water crafts and at the Time Space Existence 2025 Venice Biennale.

World models have recently seen a rapid growth in both their popularity and capability as more data efficient tools for generating robot training data or simulating real world environments, with many works proposing their integration into the robot learning pipeline. While highly practical, in this work we demonstrate that world models introduce a uniquely stealthy and effective data poisoning entry point into the robot learning supply chain that can result in the deployment of unsafe or otherwise compromised robotic policies despite training on seemingly safe ground truth training data. In contrast to traditional data poisoning techniques which directly implant dangerous trajectories into sold or uploaded datasets, our novel attack methods inject malicious prompts or compromising transition dynamics into visibly safe teleoperated datasets which are only activated once fed through a world model as input. This can result in the generation of synthetic, dangerous robot training trajectories and subsequently unsafe or compromised robot policies. We demonstrate the effectiveness of our attacks against both state of the art action conditioned and text conditioned world models, showing a full end-to-end backdoor on a downstream DRL policy and a proof-of-concept for the VLA setting. Overall these findings necessitate research into more secure world models and reevaluating their position within the robot learning supply chain.

Hindsight relabeling usually turns achieved future states into exact goals, which can overconstrain offline robot learning when task success depends only on a subset of the state. We propose Goal-Set Hindsight Relabeling (GS-HER), a predicate-level generalization of HER in which achieved states certify query-defined goal sets rather than singleton goal states. A binary query specifies which variables define success, making the goal predicate an inference-time input while leaving the underlying offline GCRL algorithm unchanged. Across OGBench tasks and five offline goal-conditioned learners, GS-HER improves performance when full-state goals are bottlenecked by nuisance dimensions and turns hindsight relabeling into a reusable goal interface: one checkpoint can answer multiple robot goal predicates without retraining.

Robot middleware faces a new role in the era of Physical AI. Learned policies, planners, and vision-language-action (VLA) models now enter deployed robots as causal participants on the control path, but the layer that integrates them with timing, scheduling, and network has not been named. Recent language-agent work names this layer the harness, the external system that mediates tools, manages state, bounds resources, and records execution. The robotics community has not yet adopted this framing, and we propose that robot middleware is that harness. A Physical AI harness differs from a software harness in where it intervenes. A software harness mediates at tool-call boundaries. A Physical AI harness must mediate at control, computing, and communication simultaneously, because a learned policy's output crosses all three: its commands shift the trajectory, its inference time shifts the schedule, and its payload shifts the bandwidth. Robot middleware is the lowest robot-stack layer with mediating abstractions over all three, so it is best positioned to compose their enforcement. It already provides most of what a harness needs but lacks the enforcement for an AI model. We name this missing enforcement as three functions: Projection gates each output at emission, Isolation bounds the model's execution and transmission slot, and Transfer falls back to a verified baseline when checks fail. Each appears today as hand-built application code in deployed robot systems, built on surfaces robot middleware already provides. Robot middleware should host them not as the best single-axis enforcer but as the layer that composes all three. We sketch this as a ROS 2 Harness Profile, a deployment artifact that carries an AI model's declared output region, inference budget, and operating regime while the middleware enforces them across ROS 2, DDS, and Zenoh.

Realizing the vision of 6G connected robotics requires reconciling high-performance collaborative control with the rigid spectral limitations of physical wireless channels. In realistic collaborative sensing scenarios, spectral resources are quantized into finite physical resource blocks or orthogonal subcarriers, rendering simultaneous transmission by all agents infeasible. To address this, we propose Multi-Agent Semantic K-Scheduling (MASK), a control architecture designed to sustain robust, risk-aware coordination under strict instantaneous bandwidth caps. We introduce Arbiter-Assisted Semantic Information Gating (A-SIG), a lightweight coordination mechanism that enforces hard access constraints by scheduling only the top-K agents based on locally computed semantic importance scores. By aggregating these prioritized observations into a compact latent state, a self-supervised global encoder enables a distributional policy to mitigate tail risks despite data sparsity. We evaluate MASK across diverse benchmarks, demonstrating that it matches the performance of communication-unconstrained baselines even when channel access is restricted to a small fraction of the swarm size. Furthermore, the framework exhibits inherent resilience to packet erasures, validating semantic scheduling as a critical enabler for resource-constrained 6G systems.

Time-of-flight cameras are popular in robotics because they provide direct depth information and are compact, inexpensive, and less dependent on ambient visible light. However, their low spatial resolution and depth noise raise questions about their suitability for stabilizing fast, unstable dynamics. In this paper, we show that an inexpensive, low-resolution time-of-flight camera can provide angle feedback for reliable and precise balancing of an inverted pendulum on a cart, a canonical control benchmark. These results open the door to using compact, inexpensive, low-resolution time-of-flight cameras for precise feedback control of fast, unstable systems.

Diffusion models have become a powerful tool for generative modeling in robotics, with diffusion policies excelling at modeling multimodal action-trajectory distributions. However, when demonstrations are limited, standard sampling often reproduces dominant behaviors while neglecting valid but rare modes, limiting the discovery of novel solutions. Existing approaches, such as guidance methods or combining reinforcement learning with diffusion, either push samples into infeasible regions or struggle to escape local minima, failing to systematically uncover diverse behaviors. To address these challenges, we propose a framework that combines Feynman-Kac correctors with a novel guiding potential that systematically guides diffusion policy samples towards promising yet underrepresented samples. These trajectories are refined using sampling-based trajectory optimization and reincorporated into the training set to retrain the diffusion policy. Our method effectively mines and repairs novel trajectories, enabling the systematic discovery of diverse and executable behaviors. We demonstrate the effectiveness of our framework across a range of manipulation environments, consistently discovering new behaviors.

World action models inherit the predictive capability of world models, enabling action generation to be guided by anticipated future observations. However, they rely primarily on vision and often fail in contact-rich manipulation, where critical cues arise from physical interaction. In this paper, we propose Dream-Tac, a unified Tactile-World Action Model that jointly models actions, future visual observations, and tactile dynamics. Specifically, Dream-Tac introduces (i) contact-gated visuotactile fusion to selectively integrate tactile signals and (ii) a contact-aware attention bias to better regulate cross-modal interactions during manipulation. To support real-time deployment, we further design a dual-level acceleration strategy, reformulating the contact-aware bias to preserve the fused attention path during training and introducing cache-based diffusion acceleration at inference, achieving up to 2.9$\times$ faster training and 1.8$\times$ faster inference. Across six contact-rich manipulation tasks, Dream-Tac improves action accuracy by 31.7% on average, demonstrating the effectiveness of unified visuotactile world modeling.Code is available at https://github.com/LYFCLOUDFAN/Dream-Tac.

Simulation plays a key role in automated robotics research supported by large language models (LLMs). However, existing simulators often require custom code or complex interfaces, creating a barrier to rapid prototyping and automated algorithm development. To this end, we propose the Intelligent Robot Simulator (IR-SIM), a lightweight skill-native navigation simulator designed for rapid scenario construction, benchmarking, and robot learning. In IR-SIM, scenarios are entirely defined by YAML configuration files that specify mobile robot kinematics, geometric collision checking, LiDAR sensing, visualization, and behavior modules. This design makes robotic simulation fully describable and reproducible, allowing scenarios to be generated and modified from text prompts through the proposed IR-SIM agent skills. The resulting scenarios can be used for automated benchmarking of navigation algorithms and for automated generation of training data for learning methods. Furthermore, IR-SIM provides bridges to high fidelity simulators and real world deployment, allowing users to validate their algorithms in more realistic settings after prototyping without extra coding. The experiments showcase the convenience and versatility of IR-SIM in multiple tasks: constructing navigation scenarios from natural language, training a collision avoidance policy, benchmarking social navigation policies, and bridging to high fidelity simulators and real world deployment. The project website is available at https://github.com/hanruihua/ir-sim.

Reinforcement learning (RL) has become a powerful paradigm for robot learning, particularly in sim-to-real settings, but its broader adoption remains limited by the engineering pipeline surrounding the algorithms. Building tasks, shaping rewards, and tuning hyperparameters require substantial expert effort, making RL workflows costly and difficult to scale. We introduce HARBOR, an agentic framework that frames robot RL automation as a harness-engineering problem: given a simulator codebase and a task specification, it automates the workflow from environment setup to policy training in simulation. HARBOR decomposes such high-level objectives into bounded stages executed by specialized agents through standardized commands, persistent artifacts, executable gates, and reusable knowledge, and scales iteration via decentralized parallel trials and experience learning across runs. We evaluate HARBOR across 6 benchmarks and 16 tasks in total, spanning manipulation, locomotion, and bimanual dexterous control. We demonstrate that HARBOR automates the simulation RL workflow end-to-end, designs rewards, tunes algorithms to match or improve over default configurations, and reduces engineering effort at practical token and wall-clock cost; the resulting policies can also be transferred to real robots.

Exploratory manipulation often turns an apparent failed attempt into the key evidence for what to do next. For example, a robot pulls a locked cabinet drawer, fails, and only succeeds after opening the lock. The failed pull reveals a latent precondition (the drawer is locked) that determines the minimal-success action chain (the fewest actions that complete the task), here [lock-open, drawer-pull]. Correctly reading this trace is therefore the prerequisite for recovering that chain. We formalize this setting as Exploratory Manipulation Trace QA (EMT-QA): given synchronized video and proprioception from an exploratory trace, predict the minimal-success action chain under the latent precondition revealed by the probe. However, even state-of-the-art VLMs and embodied multimodal LLMs misread this evidence: they do not reliably recover the chain from raw video, raw proprioception, or their combination. We introduce Closed-Loop Trace Distillation, a pipeline that uses a per-task coding agent to inspect labeled training traces and distill a one-line natural-language prompt over the trace, which we call the Distilled Reading Heuristic (DRH). At inference, no agent is invoked and no model weights are updated; a frozen VLM receives the raw trace plus the DRH as a prompt entry. Across three simulator and two real-robot tasks, the DRH improves chain accuracy by +0.38 to +0.47 over the best raw-modality baseline. The same DRH also serves as the sole specification for one-shot programmatic classifiers that match the prompted VLM.