Robust Lidar-Inertial Odometry

This short report documents our entry to the COMFORT Localization Benchmark (IROS 2026), evaluated on the GrandTour dataset recorded with the Boxi payload. It extends MOLA-LO into a LiDAR-inertial system that also ingests IMU and, optionally, legged kinematic odometry. We describe the architecture, the streams consumed, the local protocol that selected the submitted configuration, and the measurements backing our real-time claim.

This paper proposes Dynamic-LIVO, a dynamic-aware LiDAR-Inertial-Visual Odometry (LIVO) system for robust state estimation and static colored mapping in dynamic environments. Dynamic-LIVO employs Spatio-Temporal (S-T) normal analysis to identify dynamic LiDAR points and propagates the resulting classification to both LiDAR-inertial and visual-inertial updates, preventing dynamic LiDAR measurements and their associated visual observations from affecting state estimation and mapping. However, S-T normal estimation can be unreliable in newly observed and spatially sparse regions due to insufficient spatio-temporal observations. To address this issue, we introduce a time-delayed S-T normal estimation strategy that defers the classification of insufficiently constrained points and re-evaluates them as additional observations become available. This strategy improves dynamic classification reliability while preserving valid static points for map construction. Extensive experiments on public and self-collected datasets with diverse sensor configurations demonstrate that Dynamic-LIVO improves localization accuracy and produces cleaner static colored maps in challenging dynamic environments. The source code and self-collected dataset will be publicly released upon acceptance.

LiDAR-based SLAM (Simultaneous Localization and Mapping) and LIO (LiDAR-inertial odometry) algorithms are often used for precise navigation of unmanned aerial vehicles, especially during interactions with the aerial robot's environment. However, the performance of these algorithms is greatly dependent on the scenario, LiDAR, and robot motion characteristics, often requiring an intensive tuning process to achieve the desired performance. To aid these tuning efforts, this paper analyzes the influence on performance of the parameters of an EKF-based LIO algorithm (FAST-LIO2) and the LIO module of a graph-based SLAM algorithm (Cartographer) on aerial LiDAR SLAM datasets recorded using different LiDARs in low-to-moderate-altitude flights in diverse environments. The analysis is conducted on the absolute trajectory error (ATE) resulting from processing the datasets with the LIO algorithms configured with each combination of parameters obtained in an exhaustive grid search. The relationship between individual parameters and the ATE results is assessed using Pearson's correlation, while the influence of each parameter is assessed using random forest permutation importance analyses with random forest models trained to predict the resulting ATE values based on the choice of parameters. The performed analysis obtains for Cartographer and FAST-LIO2: i) the identification of parameters with stronger influence in performance, ii) a simplified tuning procedure, and iii) tuning recommendations. Using the proposed tuning recommendations, both algorithms obtain on the analyzed datasets ATE values within 5 cm to the optimal performance found in the grid search procedure in 94% of the analyzed cases.

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within $\pm 2\%$. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

We present DCLP++, a local navigation frameworkthat uses footprint clearance as the geometric basis for studying relative motion features in dynamic environments. Each valid LiDAR return is mapped to its shortest Euclidean distance from the filled robot footprint before reciprocal encoding, replacing distance from the sensor with distance to the occupied body. Radial measurementsor simulated planar relative velocities provide short-horizon features without static-dynamic labels in the policy input. A preliminary study uses a rectangular robot with a speed limit of 1 m/s among 20 moving obstacles. On 100 fixed validation tasks, two selected training seeds yield mean success rates of 42% with sensor rangeand 70% with footprint clearance after 200,000 environment steps.Motion variants show mixed additional gains. These results supportthe clearance-based observation in the evaluated setting; reliable motion benefits and transfer across robots require further evaluation.

Autonomous navigation in space requires reliable terrain assessment for safe operations, especially in underground environments with limited communication, computing resources, and power budget. This paper presents a lightweight method for real-time vibration-aware traversability mapping using a Light Detecting And Ranging (LiDAR) point cloud and Inertial Measurement Unit (IMU) measurements. An initial vibration proxy is estimated from terrain geometry by applying Random sample consensus (RANSAC) to local point-cloud patches produced by a Simultaneous Localisation And Mapping (SLAM) algorithm. In parallel, the IMU provides local observations of the vibration experienced by the rover during traversal. The point-cloud-based prediction is then corrected online using Recursive Least Squares, allowing the system to adapt the geometric estimate to the measured rover response. The approach is evaluated in a lunar analogue environment, an outdoor field, and an underground mine.

Reliable onboard state estimation is essential for safe robotic operation, yet unmodeled disturbances, such as sensor aliasing or out-of-distribution noise, still cause estimators to degrade or fail completely. While many methods aim to improve estimator robustness, only a few provide introspective mechanisms to assess estimate quality. Existing uncertainty measures, such as covariances, rely on idealized assumptions and tend to be overconfident, and more recent data-driven approaches are typically tied to their training data distributions. We propose a sensor-agnostic introspective method that assesses estimator health by analyzing the frequency-domain power distribution of recent velocity estimates. The method is evaluated using outdoor flight data from an aerial robot running visual-inertial, LiDAR-inertial, and radar-inertial odometry. The dataset includes multiple estimator failures, enabling analysis of several frequency-domain indicators, such as signal power, spectral bandwidth, and entropy. We observe consistent spectral power differences between healthy and degraded estimates, allowing detection of 51%-58% of labeled failures with 60%-84% precision across three fundamentally different state estimation frameworks. Our results show that even a simple frequency-domain analysis of a state estimator's output can serve as a lightweight introspective tool to complement existing robustness techniques in real-world robotic deployments, and opens promising avenues for future investigation.

This article presents a kinematic-inertial-LiDAR-visual odometry for humanoid robots, called KILVO. Tailored to the platform features, requirements, and real-world complexity, it fully utilizes the sensors commonly equipped on humanoid robots, including joint encoders, IMU, LiDAR, and camera, within an asynchronous-sequential hybrid error-state iterated Kalman filter (ESIKF). Specifically, inertial data are used for prediction, leg kinematics are processed asynchronously at a high rate and provide proprioceptive constraints, while exteroception is updated sequentially, first by registering LiDAR points for geometric priors and then by updating the visual component via photometric errors. Moreover, the framework is elaborately designed with multimodal adaptation for resilience to sensor failures. A compact contact estimation module is also developed, sharing information with state estimation without additional sensors. Extensive experiments on public datasets and in the real world across multiple humanoid robots, gait patterns, and scenarios demonstrate that KILVO achieves highly competitive accuracy, efficiency, and output rates, with strong robustness against sensor degradation and failures, making it more suitable for humanoid robots than state-of-the-art fusion methods. Our code and datasets are released on GitHub.

The AI City Challenge 2026 Track 1 evaluates multi-camera 3D perception in large indoor warehouses under a synthetic-to-real (Sim2Real) setting; depth is available only for training and validation, so inference is RGB-only. We use two RGB-only routes as a controlled test of one hypothesis: that cross-view geometric consistency, not monocular depth accuracy, governs performance under Sim2Real. The first is a geometry-first pipeline: YOLO11x detection, homography lifting to the world frame, class-level 3D size priors, multi-camera fusion, world-coordinate tracking, and offline tracklet stitching. The second is estimated-depth pseudo-LiDAR: monocular depth (D4RT, Metric3D~v2) back-projected into a fused point cloud and passed to a 3D detector (V-DETR), mirroring prior point-cloud winners that used depth. The gap is decisive: geometry-first reaches 13.0 3D HOTA (51.6 LocA), whereas pseudo-LiDAR collapses to 0.12 (9.2 LocA). We trace the collapse to cross-view inconsistency of monocular depth---scale correction is necessary but not sufficient---which domain-adaptation fine-tuning does not repair within budget. Within the geometry pipeline, offline stitching is the only intervention that helps; SAHI detection, appearance Re-ID, learned lifting, RT-DETR ensembling, test-time augmentation, and domain randomization all fail to beat the baseline detector. The bottlenecks are complementary: detection quality bounds the geometry route (DetA), localization consistency bounds pseudo-LiDAR (LocA). We release a complete, reproducible RGB-only pipeline and ablation.

Open-source LiDAR-inertial odometry (LIO) systems have achieved remarkable benchmark accuracy, yet current state-of-the-art implementations are primarily optimized for evaluation performance rather than the requirements of real-time closed-loop aerial control. When deployed onboard UAVs, this can introduce limitations that degrade flight performance. In this work, we identify five architectural deficiencies in a representative tightly coupled IESKF-based LIO implementation: odometry publishing tied to the LiDAR rate (10 Hz instead of the IMU's 200 Hz), missing velocity outputs, execution bottlenecks that block IMU processing, mutex contention, and synchronization race conditions. We introduce corresponding modifications including IMU-rate forward propagation, direct body-frame velocity publishing, SLERP-based smoothing, dual-executor isolation, and explicit synchronization protection. The resulting system increases odometry output from ~10 Hz to a stable 200 Hz, provides a complete Twist state at every IMU sample, and preserves continuity during transient LiDAR loss. Experiments on a Livox Mid-360 / Pixhawk 4 Mini autonomous UAV with motion-capture ground truth validate the approach. Since the underlying estimator (IESKF + ikd-Tree) remains unchanged, the proposed improvements can be directly applied to FAST-LIO2-derived implementations.

LiDAR-inertial odometry (LIO) is a key component of autonomous navigation, but high-dynamic driving exposes two coupled challenges: intra-scan motion distortion and vibration-contaminated inertial measurements. Most real-time LiDAR-inertial pipelines propagate the system state by integrating raw IMU measurements and then use the propagated trajectory for point cloud de-distortion, thereby propagating inertial noise into both the corrected scan and the subsequent scan-to-map registration. This paper presents WNOJ-LIO, a LiDAR-IMU fusion framework based on a White-Noise-on-Jerk (WNOJ) Extended Kalman Filter (EKF). WNOJ-LIO employs a decoupled WNOJ prior on $\R^3 \times \SO(3)$ for state prediction and treats the IMU as a high-frequency measurement source rather than the driver of state propagation. The resulting posterior state history is then used for LiDAR scan de-distortion and subsequent point-to-plane LiDAR updates. The decoupled process model enables closed-form covariance propagation, thereby bridging the gap between batch WNOJ Gaussian process (GP) trajectory priors and recursive filtering. Simulation results demonstrate improvements in acceleration and angular-velocity denoising, scan de-distortion, and localization accuracy over a FAST-LIO-style baseline. Real-world experiments were conducted using an autonomous racing car on four driving segments with maximum speeds ranging from 53 to 208~km/h, covering a wide range of vehicle vibration levels. The experiments further validate the proposed method and provide a comprehensive evaluation of its performance in estimating acceleration, angular velocity, body-frame linear velocity, attitude, and position under highly dynamic driving. The source code of WNOJ-LIO is publicly available at https://github.com/LvJohny/wnoj-ekf-lio.git.

iG-LIO is a tightly-coupled LiDAR-inertial odometry system fusing generalized-ICP and point-to-plane constraints in an iterated error-state Kalman filter over an incremental voxel map. We report an open-source ROS 2 Jazzy port of the original ROS 1 implementation and, more importantly, the diagnosis of environment-induced numerical failures that appear only after the port: a mechanically faithful migration -- estimation mathematics left unchanged -- compiled and ran, yet diverged with NaN internal values. Both causes trace to the modern ROS 2 toolchain, not the algorithm: a Quality-of-Service (QoS) mismatch that silently drops and reorders IMU samples, and an uninitialized parallel-reduce accumulator arising from the oneTBB + Eigen combination shipped with current distributions. We further correct Ouster point-field parsing to ensure correct point cloud undistortion with newer Ouster revisions, add Velodyne Velarray M1600 support, provide both a compile-time-gated Livox CustomMsg path and a driver-free path for Livox sensors publishing standard PointCloud2 (e.g. Mid-360), and expose the runtime via YAML. The result has been validated in an Ouster OS0 Rev7, an Ouster OS1 Rev 7, and a Livox MID-360. This report is a citable reference for the port itself, not a claim on the underlying algorithm [1]. The ROS 2 port of iG-LIO described in this document can be found at https://github.com/Forestry-Robotics-UC/ig_lio/tree/ros2-jazzy.

Automated progress monitoring on construction sites is an active area of research and development. Robot and human-carried mapping systems have been developed to build 3D maps of building and infrastructure projects. While LiDAR-based mapping systems achieve high accuracy, the cost of LiDAR can be prohibitive. Consumer-grade cameras with wide field of view ("360 cameras") combined with embedded inertial measurement units (IMUs) provide a cost-effective alternative. To support change detection and progress monitoring, highly accurate visual Simultaneous Localization and Mapping (SLAM) and floor plan-referenced localization systems are required. In this paper we present a high-quality dataset collected at an active construction site, which captures realistic challenges such as variable lighting conditions, moving workers, fast motions, and repetitive structures. The dataset offers thirty visual-inertial sequences recorded across seven floors over an eight-month period of the construction project. Ground truth trajectories were collected using a high quality LiDAR-inertial SLAM system rigidly attached to the 360 camera. Additionally, we report the results of an open research challenge evaluating the best visual SLAM and localization systems from around the world. The Challenge attracted substantially higher participation in SLAM, with 62 teams compared to 22 in floor-plan-referenced localization, reflecting the broader maturity of SLAM methods. The higher errors in localization further highlight the difficulty of this task in construction and point to the need for continued research, which this dataset is intended to support. The dataset and the benchmark are publicly available at: https://hilti-trimble-challenge.com/dataset-2026.

Although multi-source fusion positioning systems have achieved significant progress, accurate and reliable heading estimation remains a critical challenge due to the lack of gravitational constraints and the inherent weak observability of heading in complex environments. Most existing methodologies are specifically tailored for the startup phase, relying on a singular initial alignment to establish the heading reference. Consequently, these approaches lack the adaptability required to refine heading estimates dynamically, which renders the system highly vulnerable to accumulated drift and observation noise during prolonged navigation or immediately following GNSS signal outages. To address these limitations, this paper proposes WinTA-GIL, a novel heading refinement framework that integrates information from Global Navigation Satellite System (GNSS), Inertial Measurement Unit (IMU), and Light Detection and Ranging (LiDAR) through a temporal window-based optimization strategy. Unlike conventional alignment methods restricted to the startup phase, WinTA-GIL leverages high-precision local trajectories from LiDAR-Inertial Odometry (LIO) to register against filtered GNSS observations. This approach transforms heading estimation into a repeatable, trajectory-based consistency optimization problem. In particular, an adaptive re-estimation mechanism based on state discrimination is incorporated to trigger heading corrections whenever necessary, thereby effectively suppressing the inertial drift accumulated during challenging conditions. Extensive experiments on both open-source and self-collected datasets demonstrate that WinTA-GIL significantly outperforms state-of-the-art approaches in both estimation accuracy and system robustness.

We present a real-time LiDAR-based framework for Gaussian Splatting SLAM that tightly couples fast G-ICP registration with spherical rasterization-based dense mapping for large-scale sequences. Leveraging LiDAR geometry rather than appearance, we reuse tracking-estimated local covariances to initialize Gaussians with range-aware scales and to derive surface normals for geometry-aware map optimization. We further introduce a covariance-derived geometry score that measures local complexity and drives pruning in planar regions and selective densification in structurally rich areas, while optimized Gaussians and LiDAR-specific confidence cues are fed back to improve tracking robustness. On the Newer College dataset, our method achieves an F-score of 86.78% using purely online trajectories at real-time speed ($>$20 FPS), and additional experiments on other datasets confirm its stability and scalability.

Thermal imaging is resilient to adverse conditions, such as intense illumination, low-light operation, and fog, and can therefore mitigate odometry degradation when visible-spectrum imagery becomes unreliable. Nevertheless, most thermal cameras employ automatic gain control (AGC), and thermal images often present low global contrast despite containing informative edge structures. These characteristics undermine brightness constancy and cause conventional optical flow tracking-based odometry pipelines that fundamentally rely on the brightness constancy assumption across consecutive frames. To address these issues, we propose a general LiDAR-Inertial-Thermal SLAM system that accommodates both visible-light and thermal cameras. PL-LIT combines an online photometric calibration module with a deep neural network for point-line feature extraction, enabling more stable and repeatable thermal tracking. For state estimation, we design a tightly coupled LiDAR-Inertial-Thermal formulation within an Error-State Iterated Kalman Filter (ESIKF). We further introduce a line-feature constraint scheme ensuring the reliability of geometric constraints across varying thermal appearances. In addition, PL-LIT builds a probabilistic thermal-intensity voxel map, which supports real-time thermal anomaly detection. Extensive experiments demonstrate that PL-LIT exhibits generality and robustness in visible-light environments, achieves state-of-the-art performance on long-range thermal infrared datasets, and provides practical safety inspection functionality based on thermographic mapping.

Simultaneous Localization and Mapping (SLAM) is essential for autonomous systems, yet achieving reliable, globally consistent pose estimation and dense mapping in complex environments remains challenging due to geometric degeneracy and sensor drift. While multi-sensor fusion addresses these issues, existing systems often lack the modularity to adapt to diverse platforms and rely on mathematically inconsistent fusion or suboptimal map representations. To address these limitations, we propose LXD-SLAM (LiDAR+X Dense SLAM), a highly versatile and unified multi-sensor fusion framework. Centered around 3D LiDAR, our system allows for the plug-and-play integration of LiDAR, Camera, IMU, Wheel Encoder, and GNSS, supporting up to 32 distinct sensor combinations. We employ a mathematically unified Iterative Error-Sate Kalman Filter with an adaptive hierarchical prediction strategy and an update step that minimizes point-to-mesh distances and visual reprojection errors. To support this, the environment is modeled using continuous multi-layered Gaussian Process (GP) sub-meshes, which enables efficient ray-to-mesh depth recovery for visual features. For global consistency, we introduce an Extended Scan Context (ESC) descriptor derived from the GP sub-meshes alongside a Bidirectional PnP optimization for robust multi-modal loop closure within a hybrid pose graph. Extensive evaluations on public datasets and real-world experiments demonstrate that LXD-SLAM matches or exceeds state-of-the-art specialized odometry solutions across various configurations while generating high-fidelity, globally consistent dense meshes in real-time. The relevant codes and data will be made available at https://github.com/peterWon/LXD-SLAM upon publication.

6-DoF LiDAR-based localization is a fundamental capability for autonomous systems operating in large-scale outdoor environments. Many deep-learning-based localization methods have achieved promising performance so far. However, as one of the always-on modules competing for limited on-board computational resources, the localization module is expected to consume only a small portion of the overall compute budget. Most existing learning-based methods are still too heavy for this purpose. In contrast, binary neural networks (BNNs) offer an appealing solution, but the 1-bit compression causes severe information loss and performance drop. In this paper, we address this challenge by proposing Binarized LiDAR-based Localization (BiLoc), the first binary neural network framework for 6-DoF LiDAR localization. Specifically, we reinterpret the training of BNNs from the perspective of the information-bottleneck principle, aiming at retaining minimal yet sufficient representations for pose estimation while suppressing redundant variations. And we introduce an auxiliary objective that adaptively regulates information retention in the binary encoder, effectively mitigating the information loss caused by binarization. This auxiliary objective provides additional optimization signals that compensate for the limited representational capacity and the gradient mismatch inherent in BNNs. Extensive experiments on large-scale outdoor LiDAR datasets demonstrate that BiLoc establishes a new state of the art for LiDAR localization with BNNs.

In this study, we develop a Structured framework for Gaussian Splatting (3DGS) with LiDAR integration (Structured-Li-GS). It is a lightweight Gaussian Splatting pipeline that leverages LiDAR-inertial-visual SLAM. Structured-Li-GS achieves high-quality 3D reconstructions with fewer Gaussians by training on accurate, dense, colorized point clouds. Gaussian primitives are anchored using sub-sampled point clouds, and their ellipsoidal parameters are initialized from local surface geometry. Our training strategy integrates a comprehensive set of loss terms, including photometric, flattening, offset, depth, and normal losses, guided by the dense point cloud, enabling accurate reconstruction without Gaussian densification. This approach produces up-to-scale, high-fidelity results with a moderate model size. For experimental validation, we develop a custom hardware-synchronized LiDAR-camera handheld scanner. Experiments on both benchmark datasets and our real-world in-house dataset demonstrate that Structured-Li-GS surpasses state-of-the-art methods while using fewer Gaussians.

Robust and accurate odometry estimation is essential in modern robotics. In environments characterized by highly dynamic motion and sensor noise, odometry estimation becomes increasingly challenging. Autonomous racing combines both factors in an unstructured setting, where minimizing odometry latency is essential for stable closed-loop control. This paper introduces FAR-LIO, a highly optimized CUDA-accelerated LiDAR-inertial odometry framework developed for Fast, Accurate, and Robust performance. Our system leverages a novel CUDA-based voxel hashmap to enable parallelized nearest-neighbor search and efficient map updates. We employ a sparsity-aware Generalized Iterative Closest Point algorithm with adaptive thresholding on top of the CUDA-based voxel hashmap with adaptive density to achieve low-latency without compromising accuracy. An Extended Kalman Filter serves as a robust backend. It utilizes an upsampling and delay compensation strategy to fuse the LiDAR odometry with high-frequency IMU data, thereby ensuring a robust and smooth odometry output. We evaluate FAR-LIO across four different sensor setups, using both public datasets and data from two autonomous racecars driving at speeds of up to 250 km/h. FAR-LIO achieves an average 6.9% reduction in the positional error and 38.4% lower runtime compared to state-of-the-art baselines on target hardware using a single parameter set. This demonstrates its computational efficiency and broad applicability. To build upon our work, our code is available open-source on https://github.com/TUMFTM/FAR-LIO.

Tightly coupled LiDAR-visual-inertial odometry (LIVO) fuses precise geometric depth with complementary visual measurements, yet its exteroceptive sensors face independent failure modes: LiDAR degenerates when scan geometry is under-constrained, while visual measurements degrade under adverse illumination or texture absence. Existing countermeasures, including binary degeneracy detection, covariance inflation, and scene-level quality gating, operate at the modality level and leave the direction-dependent structure of the joint information matrix unaddressed. Consequently, visual residuals enter pose directions where LiDAR is well-constrained, while in deficient directions visual compensation disperses across the full state space rather than concentrating where needed. We propose SA-LIVO, a LiDAR-inertial-visual odometry system addressing these limitations through direction-selective fusion and information-efficient processing. The Subspace-Aware Information Fusion (SAIF) framework eigendecomposes the joint LiDAR-visual information matrix and applies a linear-clamp soft gate per eigendirection, attenuating degenerate directions while preserving observable ones at full strength. LiDAR and visual residuals are then jointly optimized in one InEKF loop at a shared linearization point. Since visual information contributes only where LiDAR is deficient, photometric Jacobians are assembled once before the loop and reused across iterations, avoiding the per-iteration cost of conventional iterated filters. Experiments on 29 sequences from three benchmarks (HILTI'22, New College, Oxford Spires) and concurrent-degradation scenarios show accuracy competitive with the strongest baselines and bounded drift where competing systems diverge. SA-LIVO averages 12.3 ms per frame on a laptop CPU and 26.8 ms on an embedded ARM board without GPU, with 3.6-6.3x lower peak memory. The code will be open-sourced.

Hydropower tunnel inspection is critical for infrastructure integrity yet remains inefficient and hazardous using manual methods. We propose FLISP (Fast LiDAR-IMU Synchronized Path Planner), a mapless planning framework for cooperative UGV-UAV inspection. Unlike traditional map-based paradigms, FLISP features three core contributions: (1) a unified architecture where a single UGV-mounted LiDAR-IMU suite drives synchronized path generation for both platforms; (2) platform-specific solvers utilizing an enhanced Firefly Algorithm for UGV obstacle avoidance and a dynamic iterative optimizer for UAV flight; and (3) a hierarchical refinement strategy ensuring kinematic feasibility without state estimation drift. Benchmarks in a 1.2 km operational tunnel demonstrate that FLISP circumvents structural bottlenecks of map-based methods, eliminating map rasterization overhead (Fast-LIO2 + A*) and sampling instability (LIO-SAM + RRT*). FLISP achieves a 100% success rate with 7 ms latency, representing a 7-fold speedup over grid-based and a three-order-of-magnitude improvement over sampling-based baselines. Validated in operational hydropower tunnels, this approach offers a scalable solution for robotic inspection in feature-degraded linear infrastructure. A demonstration video is available at https://youtu.be/Y_ezs1PfLJ4, and the code at https://github.com/ArchibaldGuo/FLISP.git.

Gaussian Splatting has enabled real-time neural rendering, yet existing LiDAR-inertial-visual (LIV) Gaussian mapping pipelines remain fragile under illumination changes and texture-deficient scenes due to their reliance on RGB photometric cues. We present LIT-GS, a LiDAR-inertial-thermal Gaussian Splatting framework that injects LiDAR-derived plane geometry as an explicit constraint in both pose/structure refinement and Gaussian optimization. Specifically, we exploit LIV visual map points as confidence-aware cross-modal anchors to establish reliable thermal-LiDAR associations, and incorporate weighted LiDAR point-to-plane residuals into bundle adjustment to jointly refine camera poses and 3D points under weak thermal supervision. Building on the refined structure, we further introduce a LiDAR-plane-regularized differentiable splatting objective that constrains rendered 3D points to align with locally observed planes, mitigating surface thickening and structural drift in low-contrast thermal imagery. Experiments on proprietary sequences and public datasets demonstrate that LIT-GS consistently improves geometric accuracy and rendering quality over state-of-the-art LIV-based Gaussian Splatting baselines, particularly in challenging lighting conditions.

Robust state estimation and mapping in long-term, large-scale, and highly dynamic environments remains a key challenge in robotics. Existing LiDAR-Inertial-Visual Odometry (LIVO) systems achieve strong local accuracy but suffer from accumulated drift over long distances and may fail in geometrically degraded or textureless scenes. Meanwhile, GNSS-aided fusion frameworks often rely on LiDAR or visual odometry for state prediction and outlier rejection, making them vulnerable when odometry degenerates. To address these limitations, we propose a tightly coupled LiDAR-Inertial-Visual-GNSS fusion framework based on an Error-State Iterated Kalman Filter. An online spatiotemporal alignment module using Dynamic Time Warping is introduced for highly dynamic conditions. To better exploit GNSS precision, we develop observation models based on Doppler shifts and fixed-anchor Time-Differenced Carrier Phase, providing millimeter-level relative constraints without augmenting historical anchor states. We further design a degeneracy-aware dual-mode outlier rejection strategy that switches between LIVO-prior-guided rejection and GNSS-aided recovery according to the LIVO degeneracy level. Experiments on the public M3DGR dataset and a custom 20~m/s fixed-wing UAV dataset demonstrate that our system reduces accumulated drift and map ghosting, outperforming state-of-the-art methods in accuracy and robustness.

LiDAR odometry is a fundamental component of autonomous robotic systems, relying on geometric registration between consecutive point clouds to estimate ego-motion. However, traditional geometric approaches often degrade in dynamic or unstructured environments due to unreliable correspondences caused by moving objects, sparse geometric features, vegetation, and semantically ambiguous structures. Existing works have shown that, some of these limitations can be addressed by introducing semantic information from the environment in the registration process. In this work, we build on this, and show that not all elements in the environment are equally relevant for registration. Hence, we propose a semantic class-weighted ICP for LiDAR odometry. Instead of strictly filtering out points belonging to specific semantic classes, the proposed approach weights the residuals of points belonging to semantic categories based on their expected geometric stability. This strategy enables informative but potentially unstable structures, to contribute to the registration process while mitigating the influence of dynamic objects. The experimental evaluation was conducted on the SemanticKITTI and RELLIS-3D datasets, which include urban, highway, rural, and off-road environments. The empirical results show that the proposed Semantic-weighted ICP improves pose estimation, especially in challenging off-road scenarios where conventional rigid features are scarce. Furthermore, the analysis reveals that the effectiveness of this weighting strategy is highly environment-dependent, influenced by the structural and semantic composition of the scene.

Reliable mobile manipulation in dynamic indoor environments requires a scene representation that remains geometrically consistent, semantically queryable, and computationally bounded as the environment changes. Existing systems often rely on pre-built maps, static-scene assumptions, or highly accurate camera poses, which can lead to stale or misaligned scene information when target objects are relocated or pose estimates are corrected. This paper presents DREAM, a real-robot mobile manipulation framework that integrates perception, memory, localization, navigation, and manipulation in previously unseen indoor environments without a pre-built map. DREAM constructs an online spatio-semantic voxel memory from RGB-D observations registered by a LiDAR-inertial-visual SLAM backend. It further introduces pose-graph-aware Redundancy-Aware Memory Pruning (RMP) to update historical observations after pose corrections while keeping long-horizon observation history bounded. For target localization and reacquisition, DREAM combines language-conditioned 3D retrieval, open-vocabulary image detection, and multimodal large language model based semantic verification. Real-robot experiments in four dynamic indoor laboratory scenes show that DREAM improves long-horizon task success rates from 40%-60% with DynaMem to 55%-70%, while maintaining a memory footprint of 0.37-0.63 GB and an online memory-update time of 0.43-0.53 s across scenes.

Decentralized multi-robot LiDAR-SLAM is essential for collaborative missions but faces significant challenges in maintaining global consistency. Existing frameworks predominantly rely on local-search optimization or one-time coordinate alignment, which are prone to suboptimal convergence and long-term inconsistency, especially in large-scale or degenerate environments. To address these limitations, this paper presents the first decentralized LiDAR-SLAM system that integrates a state-of-the-art certifiably optimal Pose Graph Optimization (PGO) backend. By leveraging the Riemannian Block Coordinate Descent (RBCD) algorithm, our system ensures globally consistent trajectory estimation without requiring accurate initial guesses. Experimental results demonstrate that the proposed framework achieves superior robustness, improving trajectory RMSE by up to 48.9% compared to the state-of-the-art DiSCo-SLAM.

In Global Navigation Satellite System (GNSS)-degraded environments, pseudolites (PLs) provide additional signal sources to enhance positioning performance, but their integration in optimization-based frameworks remains limited. This paper presents a loosely coupled factor graph optimization (FGO) framework that fuses the GNSS/PL least-squares (LS) solutions with inertial measurement unit (IMU) data. The evaluation considers low GNSS visibility scenarios with four high-elevation GNSS satellites and up to two PL transmitters over an 80~s window. FGO achieves a 22.8% to 41.3% reduction in mean 3D error compared to standard LS methods. Compared to a GNSS-IMU baseline, incorporating PL transmitters further improves positioning accuracy, with performance depending on geometry.

This paper presents Elevator-LIO, a LiDAR-inertial odometry framework designed to achieve continuous robot localization during elevator travel, thereby supporting cross-floor robotic tasks. To address the state-estimation problem in non-inertial frames, Elevator-LIO establishes a decoupled state-estimation model that separately models the robot motion relative to the elevator and the elevator motion itself, and embeds it into a mode-dependent iterated error-state Kalman filter framework. This framework degenerates to conventional LIO estimation in ordinary indoor environments, while enabling the propagation and constrained update of elevator-related states in elevator non-inertial environments, thereby achieving continuous and stable localization. An elevator mode manager detects elevator entry and exit events using LiDAR ranging statistics and estimated states, and introduces event-triggered zero-velocity and zero-acceleration updates when the elevator stops to suppress accumulated vertical drift. In addition, this paper adopts an adaptive voxel downsampling strategy to maintain a stable number of effective points under significant environmental scale changes. We conduct extensive experiments on 20 real-world sequences containing 79 elevator rides, including practical challenges such as large-scale spaces, long vertical travel, dynamic pedestrian interference, and mirror reflections. The results show that Elevator-LIO maintains continuous localization accuracy in all sequences, with terminal height error below 1 cm in 17 sequences. In contrast, existing representative localization systems perform poorly on these elevator sequences. Tests on the Hilti 2022/2023 datasets further show that the proposed method remains competitive in standard indoor scenarios. The project page is available at https://xiaofan4122.github.io/Elevator_LIO_Page/.

LiDAR Inertial Odometry (LIO) is a critical component for many mobile robots that need to navigate without relying on external positioning (e.g., GPS). Platforms that operate autonomously in different environments and with heterogeneous LiDAR sensors require a LIO approach that can adapt to these different scenarios without human intervention. Existing LIO approaches can typically provide reliable and accurate odometry in scenarios with similar environments and sensors when suitably tuned. However, many approaches struggle to retain robust odometry across heterogeneous environments and sensors while using a consistent configuration. This paper presents EllipseLIO, a real-time LIO approach that generalises between scenarios by using methods for LiDAR scan filtering and registration that adapt to the sensor capabilities and environment without requiring scenario-specific tuning. Experiments with EllipseLIO and state-of-the-art LIO approaches on five datasets with diverse and challenging scenarios demonstrate that EllipseLIO is the best-performing approach overall. It achieves a 38% lower odometry error on average than the second-best approach and is the only approach that does not diverge in any experiment. An open-source version of EllipseLIO will be available at github.com/v4rl-ucy/ellipselio.

Autonomous navigation in GNSS-denied environments remains a core challenge for legged robots, where exteroceptive sensors such as LiDAR are prone to elevation drift in geometrically sparse or repetitive scenes. We present a factor graph architecture that augments the LIO-SAM framework with a parallel kinematic lane driven by proprioceptive leg odometry, coupled to the main LiDAR-inertial lane via an identity relative pose constraint with a selective noise model. Applied to a Linxai D50 quadruped platform across two outdoor loops totaling over one kilometer, our approach reduces elevation drift from over 30m to under 30cm and enables convergence in a scene where the baseline pipeline fails entirely. These results suggest that proprioceptive data, already computed onboard for gait control, constitutes a lightweight and effective vertical anchor for SLAM in GNSS-denied settings.

Tightly coupled SLAM formulations under mixed-rate sensing often bind temporal processing, local geometric association, estimator formulation, and map-update policy into method-specific designs. Such binding makes it difficult to vary one design choice without re-engineering the rest of the state-estimation process. This paper presents FUSE, a framework for unified state estimation in vehicular and robotic SLAM systems. FUSE organizes the state-estimation interface around observation ingestion, propagation, update, and state query, and uses this interface to separate temporal processing, residual-ready local geometric association, estimator formulation, and map-update policy. A LiDAR--IMU instantiation is developed to examine the framework under mixed-rate sensing and directional degeneracy, where high-rate inertial propagation, LiDAR-triggered geometric update, residual screening, and degeneracy-aware correction operate through the same interface boundaries. On a 418~m loop-corridor sequence, the instantiation reports a 1.626 m end-to-end trajectory error, corresponding to a 7.9% relative error reduction compared with Faster-LIO, the lowest-error baseline on this sequence. The results support FUSE as a framework for organizing state-estimation design choices and show how the evaluated instantiation regularizes updates along weakly observable directions.

Robust robotic autonomy remains challenging in complex environments, where loss of stability on uneven or slippery terrain can induce extreme accelerations and angular velocities. Such motions corrupt sensor measurements and degrade state estimation, motivating the need for improved algorithmic robustness. To investigate this issue, we introduce the Tumbling-Induced Gyroscope Saturation (TIGS) dataset, which consists of recordings from a mechanical lidar and an Inertial Measurement Unit (IMU) tumbling down a hill. The dataset contains angular speeds up to four times higher than those in similar datasets and is publicly available. We then propose two complementary methods to improve Simultaneous Localization And Mapping (SLAM) robustness and evaluate them on TIGS. First, Saturation-Aware Angular Velocity Estimation (SAAVE) estimates angular velocities when gyroscope measurements become saturated during aggressive motions, reducing angular speed estimation error by 83.4%. Second, Stretch-ICP, a novel registration and deskewing algorithm, enables reconstruction of smoother 6-Degrees Of Freedom (DOF) trajectories under aggressive motions compared to classical Iterative Closest Point (ICP). Stretch-ICP reduces linear and angular velocity errors by 95.2% and 94.8%, respectively, at scan boundaries. Together, these contributions improve the robustness and consistency of lidar-inertial state estimation under aggressive motions.

Reliable pose estimation in previously unseen environments is a fundamental capability of autonomous systems. Existing LiDAR odometry methods typically employ point-, surfel-, or NDT-based map representations, which are distinct from the semantic occupancy grids commonly used for downstream tasks such as motion planning. We introduce SOCC-ICP, a semantics-assisted odometry framework that jointly performs Semantic OCCupancy grid mapping and LiDAR scan alignment. Each map voxel encodes geometric and semantic statistics, enabling adaptive point-to-point or point-to-plane ICP based on local planarity. Further, the occupancy grid naturally filters dynamic objects through raycasting-based free-space updates. Across diverse evaluation scenarios, SOCC-ICP achieves performance competitive with state-of-the-art LiDAR odometry and remains robust in geometrically degenerate environments, even in the absence of semantic cues. When semantic labels are available, integrating them into map construction, downsampling, and correspondence weighting yields further accuracy gains. By unifying odometry and semantic occupancy grid mapping within a single representation, SOCC-ICP eliminates redundant map structures and directly provides a map suitable for downstream robotic applications.

In safety-critical scenarios, the protection level of the autonomous navigation system is crucial for enabling mobile robots to perform safe tasks. However, existing studies on probabilistic navigation systems for robots usually perform offline accuracy evaluations using limited datasets and assume that the results can be applied to unknown real-world environments. As a result, current autonomous mobile robots often lack protection levels for online safety assessment. To fill this gap, we propose a safety-critical LiDAR-inertial odometry (LIO) that provides deterministic protection levels based on on-manifold deterministic state estimation. By adopting the unknown but bounded assumption, we derive a neat closed-form relationship between point cloud noise and the uncertainty of the estimation from the iterated closest point algorithm. Using this relationship, we design an on-manifold ellipsoidal set-membership filter and implement it within the LIO system. Leveraging the properties of the set-membership filter, our system offers the feasible sets of the estimated locations as the deterministic protection levels, serving as safety references for the robots' downstream autonomous operations. The experimental results show that our system can provide effective deterministic online safety references for diverse robots in various environments.

Dense, dynamic crowds pose a persistent challenge for autonomous mobile robots. Purely reactive planning methods, such as Model Predictive Path Integral (MPPI) control, often fail to escape local minima in complex scenarios due to their limited prediction horizon. To bridge this gap, we propose Ray-based Task-Oriented Latent Dynamics (RAY-TOLD), a hybrid control architecture that integrates obstacle information into latent dynamics and utilizes the robustness of physics-based MPPI with the long-horizon foresight of reinforcement learning. RAY-TOLD leverages a LiDAR-centric latent dynamics model to encode high-dimensional sensor data into a compact state representation, enabling the learning of a terminal value function and a policy prior. We introduce a policy mixture sampling strategy that augments the MPPI candidate population with trajectories derived from the learned policy, effectively guiding the planner towards the goal while maintaining kinematic feasibility. Extensive tests in a stochastic environment with high-density dynamic obstacles demonstrate that our method outperforms the MPPI baseline, reducing the collision rate. The results confirm that blending short-horizon physics-based rollouts with learned long-horizon intent significantly enhances navigation reliability and safety.

Robot navigation in crowded pedestrian environments is a well-known challenge and we explore the practical deployment of group-based representations in this setting. Pedestrian groups have been empirically shown to enable a mobile robot's navigation behavior to be safer and more social. However, existing approaches either explored groups only in limited scenarios with no high-density crowds or depended on external detection modules to track individuals, which are prone to noise and errors due to occlusions in crowds. We show that group prediction accuracy affects navigation performance only marginally in crowded environments. Based on this observation, we propose the visible edge-based group representation. We additionally demonstrate via simulation experiments that our navigation framework, integrated with the simplified group representation, performs comparatively in terms of safety and socialness in dense crowds, while achieving faster computation speed. Finally, we deploy our navigation framework on a real robot to explore the benefits of practically deploying group-based representations in the real world.

Solid-state LiDAR-inertial SLAM has attracted significant attention due to its advantages in speed and robustness. However, achieving accurate mapping in extreme environments remains challenging due to severe geometric degeneracy and unreliable observations, which often lead to ill-conditioned optimization and map inconsistencies. To address these challenges, we propose an environment-adaptive solid-state LiDAR-inertial odometry that integrates local normal-vector constraints with degeneracy-aware map maintenance to enhance localization accuracy. Specifically, we introduce local normal-vector constraints to improve the stability of state estimation, effectively suppressing localization drift in degenerate scenarios. Furthermore, we design a degeneration-guided map update strategy to improve map precision. Benefiting from the refined map representation, localization accuracy is further enhanced in subsequent estimation. Experimental results demonstrate that the proposed method achieves superior mapping accuracy and robustness in extreme and perceptually degraded environments, with an average RMSE reduction of up to 12.8% compared to the baseline method.

Reliable odometry is essential for mobile robots as they increasingly enter more challenging environments, which often contain little information to constrain point cloud registration, resulting in degraded LiDAR-Inertial Odometry (LIO) accuracy or even divergence. To address this, we present BIEVR-LIO, a novel approach designed specifically to exploit subtle variations in the available geometry for improved robustness. We propose a high-resolution map representation that stores surfaces as voxel-wise oriented height images. This representation can directly be used for registration without the calculation of intermediate geometric primitives while still supporting efficient updates. Since informative geometry is often sparsely distributed in the environment, we further propose a map-informed point sampling strategy to focus registration on geometrically informative regions, improving robustness in uninformative environments while reducing computational cost compared to global high-resolution sampling. Experiments across multiple sensors, platforms, and environments demonstrate state-of-the-art performance in well-constrained scenes and substantial improvements in challenging scenarios where baseline methods diverge. Additionally, we demonstrate that the fine-grained geometry captured by BIEVR-LIO can be used for downstream tasks such as elevation mapping for robot locomotion.

Teach and Repeat (T&R) topometric navigation enables robots to autonomously repeat previously traversed paths without relying on GPS, making it well suited for operations in GPS-denied environments such as underground mines and lunar navigation. State-of-the-art T&R systems typically rely on iterative closest point (ICP)-based estimation; however, in geometrically degenerate environments with sparsely structured terrain, ICP often becomes ill-conditioned, resulting in degraded localization and unreliable navigation performance. To address this challenge, we present a degeneracy-resilient Frequency-Modulated Continuous-Wave (FMCW) lidar T&R navigation system consisting of Doppler velocity-based odometry and degeneracy-aware scan-to-map localization. Leveraging FMCW lidar, which provides per-point radial velocity measurements via the Doppler effect, we extend a geometry-independent, correspondence-free motion estimation to include principled pose uncertainty estimation that remains stable in degenerate environments. We further propose a curvature-enhanced degeneracy-aware localization method that leverages per-point curvature for improved data association and adaptive registration formulation, and unifies translational and rotational scales to enable consistent degeneracy detection. Closed-loop field experiments spanning environments with varying structural richness demonstrate that the proposed system reliably completes autonomous navigation, including in a challenging flat airport test field where a conventional ICP-based system fails. We release the implementation of this work at: https://opensource_code/place_holder.

Map-based LiDAR pose tracking is essential for long-term autonomous operation, where onboard map priors need be compact for scalable storage and fast retrieval, while online observations are often partial, repetitive, and heavily occluded. We propose Graph-Loc, a graph-based localization framework that tracks the platform pose against compact structural map priors represented as a lightweight point-line graph. Such priors can be constructed from heterogeneous sources commonly available in practice, including polygon outlines vectorized from occupancy/grid maps and CAD/model/floor-plan layouts. For each incoming LiDAR scan, Graph-Loc extracts sparse point and line primitives to form an observation graph, retrieves a pose-conditioned visible subgraph via LiDAR ray simulation, and performs scan-to-map association through unbalanced optimal transport with a local graph-context regularizer. The unbalanced formulation relaxes mass conservation, improving robustness to missing, spurious, and fragmented structures under occlusion. To enhance stability in low-observability segments, we estimate information anisotropy from the refinement normal matrix and defer updates along weakly constrained directions until sufficient constraints reappear. Experiments on public benchmarks, controlled stress tests, and real-world deployments demonstrate accurate and stable tracking with KB-level priors from heterogeneous map sources, including under geometrically degenerate and sustained occlusion and in the presence of gradual scene changes.

This paper introduces 2Fast-2Lamaa, a lidar-inertial state estimation framework for odometry, mapping, and localization. Its first key component is the optimization-based undistortion of lidar scans, which uses continuous IMU preintegration to model the system's pose at every lidar point timestamp. The continuous trajectory over 100-200ms is parameterized only by the initial scan conditions (linear velocity and gravity orientation) and IMU biases, yielding eleven state variables. These are estimated by minimizing point-to-line and point-to-plane distances between lidar-extracted features without relying on previous estimates, resulting in a prior-less motion-distortion correction strategy. Because the method performs local state estimation, it directly provides scan-to-scan odometry. To maintain geometric consistency over longer periods, undistorted scans are used for scan-to-map registration. The map representation employs Gaussian Processes to form a continuous distance field, enabling point-to-surface distance queries anywhere in space. Poses of the undistorted scans are refined by minimizing these distances through non-linear least-squares optimization. For odometry and mapping, the map is built incrementally in real time; for pure localization, existing maps are reused. The incremental map construction also includes mechanisms for removing dynamic objects. We benchmark 2Fast-2Lamaa on over 750km of public and self-collected datasets from both automotive and handheld systems. The framework achieves state-of-the-art performance across diverse and challenging scenarios, reaching odometry and localization errors as low as 0.22% and 0.06 m, respectively. The real-time implementation is publicly available at https://github.com/clegenti/2fast2lamaa.