Contact-Rich Manipulation

Human-hand demonstrations provide a direct and scalable source of physical interaction data for robot learning. While manual retargeting is indispensable for establishing kinematic action correspondence across different morphologies, robust transfer requires going beyond geometry to address the underlying alignment of physical dynamics between human and robot manipulation. To address this, we introduce LaST-HD, a novel human-to-robot action learning paradigm that extends reasoning-before-acting VLA by aligning human-hand and robot demonstrations in a shared latent reasoning space. Rather than mimicking human kinematics, LaST-HD trains an auxiliary action-conditioned world model on unpaired human-hand and robot trajectories to synthesize unified latent targets. After aligning cross-embodiment representations in this shared forward-dynamics space, these targets supervise LaST-HD's latent reasoning process, enabling it to internalize shared physical dynamics and drive efficient human-hand action learning. Moreover, we develop Out-of-Lab (OOL) Glove, a low-cost motion-capture glove tailored to LaST-HD for human-hand data collection. The captured human data provide precise keypoints and serve as universal action supervision across grippers and dexterous hands. Armed with the aligned latent space and high-fidelity human-hand data, we develop a progressive mixed-to-human training recipe comprising mixed human-robot co-training and human-hand online correction post-training. Through mixed co-training, LaST-HD improves generalization to novel objects, scenes, and positions using only human-hand demonstrations. With online correction, LaST-HD further adapts to novel environments and achieves over 90% accuracy using only 20 minutes of OOL glove data.

Fine-grained, bimanual dexterous manipulation remains a foundational challenge in robotics. Traditional teleoperation systems often fail in contact-rich tasks because embodiment gaps hinder accurate kinematic mapping, while tactile and force feedback remain absent. Consequently, data collection efficiency for high-precision tasks remains prohibitively low. To address these limitations, we propose a tactile-driven adaptation strategy designed to enable fine-grained manipulation on top of teleoperation pipelines. Instantiated within our bimanual dexterous framework, DexTeleop-0, this strategy introduces a real-time optimization loop that bridges the embodiment gap by translating coarse human tracking intents into precise, force-compliant robotic commands with tactile sensing. By estimating accurate contact points and leveraging a tactile-enabled fingertip force-sensing profile, the system dynamically computes localized corrections using the operational space Jacobian with respect to joint angle updates. We rigorously evaluate this tactile-driven adaptation strategy across both simulated environments and real-world hardware. Compared with representative baselines, the proposed method consistently achieves higher task success rates and improved execution efficiency in robust grasping, disturbance-resilient manipulation, and complex dexterous tasks.

Developing generalist embodied agents requires interactive environments providing visually realistic feedback and accurate action-conditioned dynamics. Interactive world models address this by simulating such complex dynamics. However, purely data-driven methods struggle to ensure precise control alignment and physically plausible visual feedback due to a lack of explicit structural constraints. To address this, we propose IOI, a hybrid interactive world model integrating analytical kinematic priors with learned physical dynamics. Unlike data-driven approaches prone to spatiotemporal drift, IOI introduces explicit kinematic guidance, computing forward kinematics from action sequences for accurate motion trajectories. These trajectories are rendered into synchronized front, side, and top orthographic projections, eliminating the need for extrinsic camera calibration. A Multi-view Kinematic Aggregation and Injection module fuses these geometric cues and injects them into the video generator, providing geometry-consistent guidance. Conditioning video generation on these deterministic trajectories establishes a synergy between the analytical simulator and the world model. Decoupling deterministic motion into the kinematic prior frees the generator to model stochastic physical interactions. Experiments on the RoboTwin benchmark validate IOI across kinematic fidelity, out-of-distribution (OOD) generalization, and policy evaluation. IOI achieves state-of-the-art simulation performance and robust zero-shot generalization to unseen OOD tasks. Furthermore, IOI serves as a reliable policy evaluator, yielding success rates closely aligning with ground-truth physics simulators. On real-world platforms, policies trained on IOI-synthesized data match those trained on teleoperation demonstrations, solidifying its practical value for embodied policy learning.

This paper presents a modular training-free framework for zero-shot, language-guided robotic manipulation in semi-structured environments. The architecture bridges the gap between high-level reasoning and low-level kinematics by decomposing the vision-action pipeline into three stages: visual perception, semantic interpretation, and task execution. To overcome the spatial ambiguity and semantic hallucinations inherent in standard Vision-Language Models (VLMs), the perception module employs FastSAM and Set-of-Mark (SoM) prompting to dynamically generate grounded, alphanumeric visual anchors. The same foundation model then operates purely as a Large Language Model (LLM) to act as a semantic router, translating unconstrained human directives into verifiable, reconfigurable configurations. Finally, these configurations are dynamically parsed by a Task Orchestrator into MoveIt Task Constructor (MTC) to generate collision-free trajectories. The framework is evaluated across two zero-shot experimental setups: unconstrained open-world sequential manipulation and dense relational spatial reasoning, achieving a 62% end-to-end task success rate across both scenarios, demonstrating its capacity to reliably execute complex physical actions without domain-specific training or manual coordinate programming.

Urban deceleration is one of the most empirically studied yet least taxonomically organized behaviors in car-following research. Recent perception-equipped autonomous-vehicle datasets enable trajectory-anchored mode discovery. We extract 1,219 sustained deceleration events from 234 urban driving logs of the Argoverse 2 Sensor dataset, encode each event in a 19-dimensional kinematic feature vector, discover behavioral modes via K-means clustering with bootstrap stability analysis, and quantify modulation by eleven scene-context variables. A HistGradientBoosting classifier predicts mode membership from the first 1.0 s of each event. Four stable modes emerge with a bootstrap Adjusted Rand Index of 0.897 across 50 resamples: anticipatory soft (62.8%), reactive closing (30.6%), brake-like jerk (4.8%), and an outlier category (1.8%). Only pair age shows a medium effect (epsilon^2 = 0.085); scene geometry and vulnerable-road-user proximity show negligible effects. The early-event classifier achieves macro-F1 = 0.758 at 1.0 s, with scene context contributing +0.059 F1 over kinematics alone. Modes are regime-invariant in medium-speed driving (ARI = 0.817) but regime-dependent at low speed (ARI = 0.166). A small set of stable kinematic modes structures urban deceleration; early-window jerk dominates predictive signal; and pair age is the primary contextual modulator.

Learning contact-rich, whole-body manipulation for soft continuum robots is held back by the lack of simulation infrastructure that has accelerated rigid-robot manipulation. Existing soft robot simulators are physically grounded but lack the contact handling, actuation support, or learning integration needed for contact-rich manipulation; rigid-body approximations offer these capabilities but sacrifice physical grounding. We bridge this gap for tendon-driven continuum robots (TDCRs) by deriving a continuum-mechanics-informed discretization that places the soft robot natively inside MuJoCo, unifying tendon forces, body contact, and dynamics in a single physics pipeline. We validate the simulator against a Cosserat rod reference (static and dynamic) and real TDCR hardware. We then train state-based imitation learning policies via teleoperation in simulation and deploy them zero-shot to a physical 3-segment TDCR on a 7-DoF Franka arm across two contact-rich manipulation tasks. To our knowledge, this is the first demonstration of sim-to-real transfer for contact-rich manipulation with continuum robots.

An invariant extended Kalman filter (IEKF) is developed for state estimation of serial rigid manipulators with an arbitrary number of links, formulated entirely within the Lie group SE(3). The group-affine property of the kinematic equations makes the linearised error dynamics autonomous, so the Riccati equation governs the true error covariance rather than a local approximation. A physically separated noise model treats gyroscope and accelerometer channels independently: the accelerometer provides translational twist via gravity-compensated integration, yielding a measurement covariance that scales with the sample interval in exact analogy with process noise discretisation; a state-dependent Coriolis noise term captures gyroscope noise propagating through the nonlinear dynamics, vanishing at rest and growing with twist magnitude. The filter is structured as a modular chain of per-link IEKFs in which the predicted covariance of each link depends on its predecessor only through the Adjoint-transformed posterior, giving linear computational cost in link count. Exponential ultimate boundedness in mean square is established via a Lie algebra Lyapunov function, with per-link bounds chained through the Adjoint operator norm to yield a stability certificate that is modular and scalable to arbitrary chain length. Numerical results validate the design.

Tactile sensing enables robots to perceive rich contact information at the grasp, supporting tasks such as object recognition, in-hand pose estimation, and slip detection. However, in many tool-mediated manipulation tasks, the interaction that determines task success occurs at the tool tip, away from the tactile sensor, making direct sensing of tool-environment contact difficult, particularly when the contact moves during interaction. In this work, we reconstruct the trajectory of extrinsic tool-tip contact using tactile sensing and robot proprioception. We formulate tool-tip trajectory reconstruction as a geometric inference problem under a single-point contact assumption. Our method first estimates the global tool-tip contact location from a calibration segment designed to approximate fixed-point behavior, and then reconstructs the full trajectory by composing relative tool motion estimated from tactile marker observations under continuous contact. Across n=51 trials with multiple trajectories, tools, wrist poses, and grasp configurations, the proposed pipeline achieves a trajectory RMSE of 8.59 +/- 2.41 mm in the world frame and a shape RMSE of 5.96 +/- 1.16 mm, while operating online at 14.00 +/- 4.11 Hz. Overall, the results show that extrinsic tool-tip trajectory geometry can be recovered consistently from grasp-level tactile sensing, with trajectory shape remaining stable across variations in tools, wrist poses, and grasp configurations.

Deformable linear objects (DLOs) such as wires, cables, and ropes are common in robotic manipulation tasks, yet simulating them with both visual realism and physical accuracy remains challenging. Existing visual simulation methods typically rely on procedural geometric primitives that lack physically grounded deformation behavior, while physics-based approaches with robot learning support often approximate DLOs as rigid-link chains or generic soft bodies, failing to accurately capture the bending, twisting, and shear mechanics of slender elastic structures. In this work, we introduce DeformX, a co-simulation framework that integrates a dedicated Cosserat rod physics engine with NVIDIA Isaac Sim, enabling DLO simulations that are both physically faithful and visually realistic. Our Cosserat rod engine simulates the dynamics and self-collisions of DLOs, and contact interactions with arbitrary free-form meshes. To achieve high-fidelity visualization, we employ mesh skinning to map discrete rod deformations onto imported CAD models. To the best of our knowledge, DeformX is the one of the first frameworks for DLO simulation that unifies realistic visualization, principled physics, and compatibility with robot learning pipelines. We demonstrate its versatility across synthetic data generation and policy learning for DLO manipulation, and validate visual and physical fidelity through comparisons against real-world experiments. Notably, fine-tuning Segment Anything Model 3 (SAM3) on DeformX-generated data yields a 10.2% mAP@75 improvement in real-image wire segmentation, and a rope-swinging policy trained entirely in DeformX achieves a mean target-hitting error of 6.6 cm on a UR5e manipulator in real-world trials, highlighting its strong sim-to-real transfer capability.

Generalizing manipulation policies across robot embodiments remains difficult because standard policies entangle task reasoning with embodiment-specific motor control. We study zero-shot cross-embodiment manipulation, where a policy trained on source embodiments must be deployed on a structurally different target embodiment without additional task demonstrations. We introduce Kinematic Interaction Transfer across Embodiments (KITE), which decouples manipulation into embodiment-agnostic task reasoning and embodiment-specific motor control, connected through a learned latent representation of interaction intent based on contact patterns. Task reasoning is performed by a shared policy that predicts latent intents from source demonstrations, while motor control is performed by an intent-conditioned action decoder learned from each embodiment's kinematic model. With KITE, adaptation to a new embodiment requires only training a new action decoder using its kinematic model, without recollecting demonstration data. We evaluate KITE on three manipulation tasks spanning transfer between parallel grippers, dexterous hands, and composite embodiments. KITE consistently achieves zero-shot transfer to structurally different target embodiments, outperforming state-of-the-art baselines in transfer success and task-embodiment scope.

Co-design of legged robots with elastic elements is challenging due to the non-differentiability of contact dynamics and mechanism engagement. This paper presents SurGE, a framework that computes surrogate gradients of the design objective through a differentiable pipeline consisting of a kinodynamic single-rigid-body (Kino-SRB) model and a design-aware control policy, and injects them into CMA-ES via mean shift with cosine-annealed step decay. On a 4-DOF design space of a hopping robot with unidirectional parallel spring, SurGE achieves 6 times lower cross-seed standard deviation and 18% tighter population concentration compared to vanilla CMA-ES, while matching or improving the best objective. Hardware experiments on a 2D design subspace show that, starting from a hand-tuned initial design, SurGE reduces the design objective by 37.65% on hardware, with the improvement trend identified in simulation transferring consistently to the physical system. SurGE provides the potential to accelerate non-differentiable co-design problems in legged robots via surrogate model gradients.

Manipulation in confined environments, such as threading a manipulator through narrow apertures, remains a fundamental challenge, especially for conventional rigid robots. Hybrid rigid-soft manipulators offer promise but face two compounding planning challenges: backbone shapes feasible in free space become infeasible under environmental contact, and planning rigid and soft segments independently ignores their kinematic coupling. We present THREAD, the first diffusion-based trajectory planner for hybrid manipulation, learning a generative prior over physically realizable backbone trajectories conditioned on local environment geometry, with physics-inspired losses encoding curvature, smoothness, and collision constraints jointly across both segments. Trained in simulation, THREAD achieves 92.4% task success with 5x fewer collisions than the strongest baseline. We show cross-embodiment real-world transfer with minimal online updates, successfully threading through apertures as small as 1.3x the soft segment diameter.

The Manipulider is a buoyancy-actuated underwater robot that enables thrusterless, glide-like locomotion and attitude-based manipulation, while providing a magnetic modular interface for rapid payload swapping (e.g., a gripper or sensors). Four syringe-based buoyancy engines distributed around the body jointly regulate net buoyancy and the center of buoyancy, allowing the vehicle to maintain large tilt angles through static force balance without continuous thrust and to avoid propeller entanglement risks. We present the mechanical and electrical design, calibration procedure, and control architecture. Experiments with a gripper attached (no external payload) show a controllable buoyancy-displacement range of 40 mL per engine ({\approx}160 g total buoyancy authority), maximum statically stable tilts of 64.6° (single-engine) and 61.8° (dual-engine), and representative vertical and tilt-transition dynamics. We further demonstrate tilt regulation, controlled ascent/descent primitives, and a proof-of-concept gripper-based payload-transport sequence without thrusters.

Robot-Assisted Surgery is integral to modern minimally invasive procedures, with automation emerging as the next frontier to enhance precision and reduce surgeon fatigue. This evolution is largely impeded by the inherent kinematic inaccuracies of surgical robots, where unreliable internal sensors lead to significant control errors. While previous methods attempted to mitigate these issues through complex model-based calibration, they often suffer from high cost and limited effectiveness. This work utilises a learning-policy to actively compensate for hardware inaccuracies using closed-loop visual feedback that was trained from a teacher-student learning framework. The policy can fuse unreliable internal readings with precise external visual data, allowing it to correct for kinematic errors in real time without needing a perfect physical model. The learned policy was successfully deployed on the da Vinci Research Kit, where experiments validated the fundamental feasibility of using external vision to overcome internal sensor deficits. This research provides a foundational and reliable control methodology, paving the way for more advanced and robust surgical automation.

Long horizon, contact-rich manipulation is inherently partially observable. This is as a single visual observation rarely captures a robot's full action context, including prior attempts, interactions, or progress. Consequently, standard visuomotor policies or vision-language-action models are prone to struggle in such tasks due to a lack of memory. To address this, we introduce Compressed Action Memory Policy (CAMP) based on the insight that a robot's own action history serves as a highly informative, self-supervised signal, enabling the policy to learn a robust, compact history representation. In our approach, we train a memory module to maintain a compressed representation of past actions, forcing it to encode a latent behavioral memory of all the robot's past interactions that can then be used to better contextualize future actions. This allows our approach to implicitly track generalized task progress and learn from failed attempts without any additional supervision, or external oversight. We evaluate CAMP across four real-robot setups and two novel simulation benchmarks: Memory-T-Bench and Memory-Manip-Bench. By demonstrating substantial gains over state-of-the-art baselines, CAMP is, to our knowledge, the first policy to demonstrate substantial success on contact-rich partially observable manipulation tasks purely through learned memory.

Human motion generation has been widely studied across diverse input modalities, text, music, and video, and recent efforts have unified these into single multimodal frameworks. However, while morphological factors such as gender and body shape are known to produce distinct kinematic signatures, no existing unified framework incorporates this into generation, treating all subjects as morphologically equivalent. We present Odoriko, the first unified multimodal motion generation framework that reflects subject bio-morphological information directly in synthesized motion output. Rather than averaging over subject variation, Odoriko generates motion that is consistent with who is moving, not just what they are asked to do, across text, music, and video conditions within a single model. When explicit morphological information is unavailable, Odoriko additionally recovers subject morphology alongside motion, unifying estimation and generation in one framework. Extensive experiments across text-to-motion, music-to-dance, and video-to-motion benchmarks demonstrate that Odoriko matches or exceeds prior specialized models on standard metrics, while enabling morphology-consistent generation that no existing unified framework supports.

This paper presents an invariant extended Kalman filtering (InEKF) approach for real-time state estimation of humanoid robots operating on non-inertial ground using only onboard proprioceptive sensing. The proposed approach estimates the robot's base position and velocity relative to the moving ground frame without requiring direct measurements of ground motion or externally mounted sensors. By exploiting kinematic constraints at the stance foot through foot-mounted IMUs, the filter accounts for ground-induced nonlinearities in the process and measurement models while remaining fully proprioceptive. The estimator is formulated to admit a right-invariant measurement model, enabling favorable error dynamics under large initial uncertainties. Observability analysis establishes conditions under which the robot's relative base position and velocity are observable with respect to the non-inertial ground frame. Experiments with the Digit humanoid robot standing and squatting atop a swaying and pitching ground showcase a 96% speedup in convergence rate and an 80% reduction in position estimate errors over existing InEKFs. Walking experiments on a uni-axially rotating ground achieve an average estimation error of less than 9 cm for an initial error of up to 1 m.

Recent advancements in Resistive Force Theory (RFT) enable approximation of ground reaction forces for locomotion in sand without the computational expense of modeling interactions with individual grains. However, these tools have been absent in 3D physics engines commonly used for robot simulation. We explore if resistive force approximations are sufficient, when integrated with standard dynamics calculations, to provide a stable substrate for a freely walking robot. To determine this, we implement 3D Granular Resistive Force Theory (3D RFT) in a physics simulation engine, MuJoCo. We verify simulations in multiple scenarios to demonstrate that key trends due to end effector shape, speed, and loading are preserved. Our implementation predicts walking distance and foot sinkage of a 12-Degree of Freedom hexapod robot within 20% of experiments in sand. While RFT has inherent approximations, the open source tool described here has potential to help develop new and improved robot designs to traverse granular media substrates.

This study presents a method for modeling diverse plant branches by iteratively estimating material parameters to support delicate branch manipulation. Branch manipulation is necessary in agricultural robotics for plant repositioning, stabilizing, and clearing visual obstructions in dense foliage. The proposed method builds a tetrahedral branch model from point-cloud data and simulates its behavior using the finite element method. Using real observed deformation data, it iteratively estimates branch parameters and then computes an optimal path with a deformation-aware motion planner to move and stabilize branches within another robot's field of view. Across 30 trials on branches with varying geometries and material properties, the proposed method reduced the deformation energy by 35.69% while increasing the path length by 8.10% on average.

We present a unified framework that turns a set of 6-DoF inspection viewpoints into a time-optimal, collision-free route for a 9-DoF robotic system. Unlike modular pipelines that fix a single inverse-kinematics (IK) configuration per viewpoint, build an all-pairs travel-time map, and then route, our method jointly optimizes the visiting order and the per-viewpoint configuration in a single global search. The three-dimensional self-motion manifold of each viewpoint is parameterized in closed form so that the pose constraint holds by construction, the rest-to-rest travel time is approximated by a closed-form admissible double-integrator surrogate, and the tour is encoded by random keys. A derivative-free optimizer (CMA-ES) minimizes a cheap penalized objective over order and configuration, after which direct-collocation trajectory optimization is applied only to the edges of the selected route to certify dynamic feasibility and torque limits, and to return exact timings. This reduces the trajectory solves from quadratic to linear in the number of viewpoints and removes the decoupling that prevents modular pipelines from being globally time-optimal. Simulations and real-robot experiments on a KUKA LBR iiwa with a 2-DoF linear stage validate feasibility, smooth execution, and reduced end-to-end inspection time relative to modular and naive distance-based baselines.

Markerless, single-RGB-D-camera motion capture provides a low-cost and non-invasive alternative to conventional marker-based systems for robot teleoperation; however, depth estimation often degrades in the presence of self-occlusion, particularly during upper-limb motion. This paper presents an Arm Kinematic Correction (AKC) method that improves depth estimation by enforcing geometric constraints based on constant arm lengths. The proposed approach reconstructs occluded joint depths by leveraging wrist positions and predefined arm lengths via a deterministic formulation based on the Pythagorean theorem, thereby avoiding the need for complex probabilistic modeling or parameter tuning. Experimental validation against a Vicon reference system demonstrates reliable performance for both static and dynamic joint motions, evaluated using root-mean-square error (RMSE) and Pearson correlation. Furthermore, motion-mapping teleoperation is successfully demonstrated in both simulated and physical robot environments. The results show that AKC enhances robustness and preserves anatomical consistency under long-duration, severe self-occlusion, even when paired with less reliable temporal filters, highlighting its practicality for real-time applications such as robot teleoperation and human-robot interaction.

Load transportation with quadruped robots is strongly affected by the dynamics of the physical interface between the robot and the load. Passive spring-based arms reduce weight and complexity compared to active manipulators, but their spring-damper dynamics can introduce oscillatory forces that degrade locomotion stability. This paper derives an extended Zero Moment Point (ZMP) formulation that includes passive payload-interface dynamics, relating stiffness, damping, and payload mass to the stability margin. The analysis shows that underdamped configurations can resonate with locomotion harmonics. Based on this insight, we augment a Single Rigid Body Dynamics model with passive subsystem dynamics and integrate it into a Model Predictive Control framework. In simulation, the proposed controller reduces stability violations by up to $10\times$, from $7.0\%$ to $0.7\%$, and increase locomotion efficiency by lowering horizontal ground reaction force effort by up to $15\%$ compared to a nominal baseline. Hardware experiments with a $2\,\mathrm{kg}$ payload show stable locomotion under pull-release disturbances where the nominal controller fails. The same model also enables end-effector tracking through passive arm dynamics without direct arm actuation.

Reconstructing simulation-ready digital twins of articulated objects from sensor observations remains constrained by two persistent gaps: (i) part-level geometric reconstruction is decoupled from kinematic-parameter estimation, and (ii) the recovered models often violate basic dynamic invariants such as energy conservation, leading to drift when the URDF is replayed in physics simulators. We present KinemaForge, a constraint-driven pipeline that jointly infers part-level shape, joint topology, and joint parameters from short RGB-D sequences and validates the result against an energy-consistent verifier built on differentiable rigid-body dynamics. The pipeline introduces three components: a kinematic constraint graph that encodes joint-part incidences as soft edges; a differentiable screw-axis solver that backpropagates from rendered observations through Featherstone's articulated-body algorithm to joint parameters; and an energy residual loss that penalises non-physical free responses of the reconstructed model. Across five PartNet-Mobility categories and an internal RGB-D benchmark, KinemaForge reduces the average joint-axis error from 4.52 degrees to 2.83 degrees (-37.4%) over the strongest geometric baseline (PARIS) and from 5.30 degrees to 2.83 degrees (-46.6%) over the interaction-based Ditto baseline, lowers long-horizon simulation drift by 64% (vs. PARIS) over 50 s rollouts, and yields URDFs whose closed-loop manipulation success rate improves by 14.6 percentage points over Ditto in our preliminary evaluation. Code and reconstruction data will be released upon acceptance.

Soft lattice structures are increasingly used in robotics to tailor compliance and guide deformation; however, actuation is typically introduced at the device or module level, with actuators inserted into otherwise passive architectures. In this work, we move actuator-lattice co-design to the unit-cell scale. We present an embedded pneumatic unit cell that integrates curved-strut lattice geometry with a bidirectional bellow actuator within a single monolithic element. When tessellated, the lattice functions as a distributed actuation field in which global morphology is governed by spatial actuation patterns rather than uniform pressurization. Experimental characterization of 1x1, 2x2, and 3x3 tessellations demonstrates scalable displacement and force generation with repeatable cyclic performance. Selective actuation of unit cells in a 3x3x3 array produces distinct global deformation modes, including bending and directional grasping, without altering hardware configuration. Additionally, coupling active and passive unit cells enables bending-driven crawling locomotion, demonstrating that heterogeneous tessellations can translate through asymmetric deformation. These results establish unit-cell-level actuation as a strategy for distributed morphing in lattice-based soft robots and provide a foundation for scalable, monolithic robotic architectures.

Sampling-based Model Predictive Control (SMPC) is a promising strategy for contact-rich robotic manipulation, combining gradient-free optimization with massively parallel GPU simulation. Yet, most prior work relies on simplified dynamics or remains confined to simulation. We present an MPC framework that leverages JAX for large-scale parallelization and efficient computation, coupled with the high-fidelity MuJoCo MJX simulator, and deploy it on a Franka Research 3 executing the Push-T manipulation task through a complete real-to-sim-to-real pipeline. The MTP variant with structured global sampling outperforms unimodal baselines such as CEM, MPPI, and PS across tasks that require mode switching, both in simulation and on hardware. Furthermore, we evaluate online domain randomization within the MPC sample budget, showing that contact-initiation parameters yield interpretable adaptation signals, whereas global physics parameters provide feedback that is too weak for reliable exploitation at typical replanning frequencies. These findings highlight key challenges for sampling-based MPC in contact-rich manipulation-contact sensitivity, tight compute budgets, and the difficulty of obtaining informative domain-randomization signals in real time.

Adaptation to damages and in-situ physical repairs is essential for long-term robot autonomy, yet challenging outside of narrowly defined and well-anticipated bounds. In this work we proprioceptively adapt to catastrophic damage in soft-actuated systems in under one minute. Architected materials are well equipped for adaptation: actuator failure occurs gradually rather than acutely, and damage can be described in a low-dimensional, discrete coordinate space. Surprisingly, latent damage representations plus a simple yet robust ensemble method is sufficient for adapting to unseen damage in real-time. Moreover, we identify conditions under which exponential sample complexity collapses to linear sample complexity for learned representations of architected materials, a concrete advantage over rigid components or continuum soft mechanisms. We demonstrate LEAP, our method for adaptive proprioception, via a tracing task for a 6DoF soft wrist based on Handed Shearing Auxetic (HSA) actuators. Our algorithm is able to adapt to cuts, burns, and actuator repairs, enabling simulation-free real-time adaptation that is critical for realizing the promise of soft robots outside the lab. Videos and more information are available at https://murpheylab.github.io/leap.

Real-time trajectory generation for on-orbit robotic servicing is challenging due to the nonlinear coupling between spacecraft bus motion, manipulator dynamics, visibility cone, and trajectory-level safety constraints. This paper studies learning-based warm-starting for sequential convex programming (SCP) in the terminal approach of a space manipulator toward a tumbling target. The proposed framework decomposes the problem into a system center-of-mass translational planning stage and a coupled attitude--manipulator torque-allocation stage, and applies a causal transformer warm-start to the latter, which constitutes the dominant computational bottleneck. Linear and flow matching action decoders are compared under different action-chunking and training dataset sizes, and the resulting warm-starts are evaluated under both cost-optimal and feasibility projection using SCP. Across 300 held-out scenarios, the learned warm-start reduces the second-stage SCP iteration count by up to 28% and the runtime by 23% while preserving the final control-cost distribution. When the learned warm-starts are used for nonconvex feasibility projection, they nearly halve the runtime relative to cost-optimal SCP, while avoiding the catastrophic high-cost tail behavior observed when initialized heuristically. These results indicate that sequence-model warm-starts can improve both the computational efficiency and trajectory robustness of optimization-based terminal guidance for space manipulation.

Adaptive torque prediction in dynamic exoskeleton scenarios requires expensive motion capture systems, which are infeasible in complex outdoor environments. Trajectory prediction has emerged as one of the effective approaches to address such an issue. However, the core challenges of exoskeleton trajectory prediction are twofold: establishing the mapping from multi-modal features to trajectory information; constructing the mapping from trajectory to torque. For the former, most existing methods perform only single-step prediction and neglect inter-subject trajectory variability, thereby limiting the trajectory optimization space and prediction generalization. To address this, this paper proposes a fast flow matching method that enables accurate trajectory prediction and better generalization for real-time performance, where trajectory generation errors and encoded observations are used to guide the training direction. For the second challenge, due to the high dynamics of the human-robot system and the strong coupling between perception and control, simple control methods struggle to achieve efficient assistance based on the predicted trajectory. This paper utilizes model predictive control and designs a novel optimization objective to optimize torque, ensuring the exoskeleton achieves comfortable and robust assistance. By integrating the above two components, the unified policy, denoted as ExoTraj, is developed to enable adaptive assistance in complex outdoor scenarios without high data acquisition cost. Experimental results show that compared to traditional methods, ExoTraj reduces cross-subject prediction error by 14.0% during the online phase and maintains robustness against external noise. Relative to the zero torque condition, ExoTraj decreases metabolic rate by 11.5-24.4%, heart rate by 1.7-19.5%, and peak muscle activation levels by 10.9-41.3%, respectively.

Humanoids deployed in human-centered environments must handle force-interactive tasks, where external contacts introduce unexpected disturbances that disrupt locomotion accuracy and stability. Existing learning-based approaches rely on broad domain randomization, task-specific force objectives, or learning-based force estimators from motion history, each of which compromises accuracy, task transferability, or out-of-distribution (OOD) robustness. We present Analytical Disturbance-Aware Policy Training (ADAPT), a framework that equips humanoid policies with a physically grounded disturbance observer. The core of ADAPT is an analytical whole-body disturbance observer that estimates residual force/torque online with the accessible robot dynamics, without requiring force/torque sensors. Fed directly into the policy, the estimated disturbances give the humanoid an explicit, physics-derived sense of external force/torque that can generalize across diverse unseen scenes. Experiments on a Unitree G1 humanoid show that ADAPT achieves accurate disturbance prediction and stronger robustness than a proprioception-only baseline under torso perturbations, standing pushes, and asymmetric hand payloads, with improved velocity tracking even on OOD disturbances. Moreover, ADAPT enables penalizing inferred disturbances at lower-body joints to encourage lighter locomotion.

This paper studies safe distributed consensus for single-integrator multi-agent systems over connected undirected graphs under simultaneous asymmetric actuator constraints and output safety constraints. Each agent is equipped with a continuously differentiable asymmetric actuator dynamics that maps a commanded control signal to the realized plant input while keeping the latter strictly inside a prescribed admissible interval. To address output safety, a barrier-coordinate transformation is introduced over a common time-varying safe interval, and a distributed synchronization law is designed in the transformed coordinates. The resulting controller integrates a graph-based coordination layer with an actuator-side tracking layer, thereby enabling simultaneous enforcement of input admissibility, forward invariance of the safe output set, and asymptotic synchronization. For compact admissible sets of initial conditions, it is shown that the closed-loop solution is complete, all signals remain bounded, the actuator inputs remain strictly within their asymmetric bounds, and the agent outputs remain inside the prescribed safe interval for all time. Moreover, the transformed synchronization errors converge exponentially to zero, and the original agent outputs asymptotically synchronize to a designer-selected admissible trajectory embedded in the common safe interval. Numerical simulations validate the proposed framework and demonstrate safe consensus under both asymmetric actuation bounds and time-varying output constraints.

Lower-limb exoskeletons require actuation systems that can provide accurate joint torque control while preserving low mass and encumbrance. Conventional architectures often rely on independently actuated joints and joint-level torque sensors, increasing system complexity and weight. This paper presents a novel differential actuation architecture for hip-knee flexion/extension, enabling cooperative torque sharing between two motors via a linear differential mapping between motor and joint. To compensate for transmission losses, a model-based friction estimation strategy is developed and experimentally implemented, allowing accurate joint torque estimation without the need for torque sensors. The proposed solution is validated on a physical prototype, demonstrating the feasibility of sensorless torque estimation in a differentially actuated hip-knee module of a lower-limb exoskeleton.

Accurate prediction of electrical power consumption is essential for energy-aware motion planning, battery management, and thermal monitoring in battery-powered humanoid robots. This letter presents a physics-based, linear-in-parameters model for the electrical power consumption of the seven-degree-of-freedom left arm of the UnitreeG1 humanoid robot. The proposed formulation combines actuator loss terms with a baseline-torque correction that captures changes in gravity-compensation load and enables accurate prediction of negative net power trajectories. Pairwise interaction terms are introduced to model power coupling during simultaneous multi-joint motion. Model parameters are identified from experimental data collected on a physical UnitreeG1 using onboard power measurements as the regression target. Across 897 trajectories covering single-joint and coordinated arm motions at multiple speed levels, the identified model achieves $R^2 = 0.933$ with an RMSE of 1.07 (W). Validation on 46 trajectories executed at previously unseen speeds yields $R^2 = 0.965$, demonstrating strong generalisation beyond the identification dataset. Analysis of the identified parameters reveals distinct power-consumption characteristics across the arm, with viscous friction dominating most joints (shoulder pitch and all three wrist joints), copper losses dominating shoulder yaw and the elbow, and shoulder roll uniquely dominated by Coulomb friction.

Dexterous grasping depends on contact regulation, not motion alone. Stable manipulation requires fingers to maintain appropriate object loading as contacts slip, deform, or become visually occluded. Existing cross-embodiment dexterous policies unify motion through retargeted hand poses or latent actions, but force feedback remains tied to each hand's sensing and actuation, limiting transfer. This work introduces a cross-embodiment force-position interface for contact-aware manipulation across heterogeneous dexterous hands. Motion intent is represented in a shared hand-pose latent, while each hand's effort signal is calibrated through system identification into physical joint torque in N.m. These torques are mapped to fingertip forces and compact per-finger load descriptors, giving the policy comparable observations of where the hand should move and how the object is loaded. Using this interface, a flow-matching visuomotor policy is trained on vision, proprioception, and calibrated contact, with structured visual masking that encourages reliance on force under grasp-relevant occlusion. The same calibrated signal drives a hybrid force-position controller for demonstration collection and execution, keeping force targets consistent across training and deployment. Experiments across structurally different hands show that calibrated contact feedback enables transferable compliant grasping, with learned primitives reusable in long-horizon manipulation pipelines.

Inverse kinematics (IK) remains a critical bottleneck for real-time robot manipulation. Classical numerical solvers achieve high geometric precision but often suffer from discontinuous branch switching and unstable behavior near kinematic singularities during closed-loop deployment. Meanwhile, learned IK approaches frequently struggle to balance spatial accuracy, motion smoothness, and real-time efficiency, particularly when trained on noisy human teleoperation data. We present \textbf{MimicIK}, a real-time generative inverse kinematics framework that learns smooth and robust joint-space motion priors from teleoperation demonstrations through conditional flow matching. Given the current joint configuration and a target end-effector pose, MimicIK predicts continuous delta-joint commands using an efficient two-step iterative refinement process based on a Minimal Iterative Policy (MIP) backbone. To enforce physical consistency, we further introduce an FK consistency loss, a differentiable forward-kinematics regularization that penalizes task-space deviations from the target pose during training. We evaluate MimicIK on a real-world 6-DOF robot dataset containing 8,848 teleoperation demonstrations. MimicIK achieves a mean position error of 4.65 mm, a 10 mm success rate of 92.01%, and a trajectory spike rate of only 7.99%. Compared with a UNet diffusion baseline, our method improves both spatial accuracy and motion smoothness while reducing inference latency from 21.66 ms to 6.74 ms. Furthermore, unlike deterministic MLP baselines that catastrophically diverge under out-of-distribution deployment, MimicIK remains stable near singular configurations and enables robust 20 Hz real-time control on deployment hardware.

Dexterous interaction with articulated objects is important for household, assistive, and humanoid manipulation, where multi-finger hands can provide compliant contact patterns beyond parallel-jaw grasping. However, articulated-object manipulation differs from static-object manipulation: the target part cannot be directly actuated, and its motion must emerge through sustained physical hand--handle contact. This makes the transition from object-centric articulated generation to hand-driven dexterous hand--object interaction non-trivial, since geometric trajectory replay or open-loop execution does not model the contact dynamics required to move the articulated part. Moreover, policies trained only for task completion under fixed dynamics can overfit nominal contact loads, especially without tactile or force feedback, and may degrade when the contact load changes. To address these challenges, we present DragMesh-2, a contact-driven framework for dexterous interaction with articulated objects that extends articulated interaction from object-centric generation to hand-driven dexterous hand--object interaction, where articulated motion must arise through physical contact. We further propose PICA, a physically informed contact-aware training mechanism that injects physical signals into policy learning without tactile or force feedback, improving robustness and task success under changing contact loads. Finally, we conduct systematic evaluation across multiple damping conditions and articulated-object categories to study robustness under contact-load variation, and provide a pure-geometry dexterous interaction resource to support future loco-manipulation and humanoid hand--object interaction research. Across seven GAPartNet objects, DragMesh-2 achieves stronger robustness under contact-load variation than the compared methods while maintaining high task success across damping conditions.

Physical human-robot interaction (pHRI) in real-world settings exposes operators to fluctuating environmental conditions during contact-rich tasks. Traditional task-centric evaluations overlook the physiological burdens imposed by these stressors. Therefore, we conducted a multimodal empirical study involving contact-rich tracing tasks under 18 distinct combinations of temperature, acoustic noise, and illuminance. Synchronously, we recorded electrodermal activity (EDA), surface electromyography (sEMG), eye-tracking data, and subjective environmental comfort ratings. Evaluating these physiological signals alongside execution data revealed hidden physiological costs not captured by objective performance. The results revealed that task performance remained stable across all environmental conditions. Autonomic workload, indexed by tonic skin conductance level (SCL), increased with temperature, while physical and cognitive workload were unaffected. Perceived environmental comfort showed no significant association with tracing error or completion time. These findings reveal a compensatory mechanism where operators maintain consistent performance by increasing their physiological effort to suppress thermal discomfort. Such insight motivates the development of physiology-aware control architectures that leverage real-time physiological metrics to reduce operator workload in unstructured environments.

Safe physical human--robot interaction on floating-base robots requires interaction regulation under changing contact constraints. We develop a contact-consistent normalization in which the residual end-effector channel is represented as a linear double integrator in acceleration coordinates. Both discrete prediction matrices are independent of configuration and support mode; posture and contact enter only through task-inertia force recovery and constraints. The controller combines a constant-Hessian receding-horizon QP, an acceleration-disturbance observer, and a priority-consistent realization. Classical operational-space impedance is shown to be the unconstrained infinite-horizon limit. MuJoCo experiments on a 17-DOF biped and a Menagerie-derived Unitree G1 model evaluate sustained forces, transmitted shocks, and scheduled contact-model changes. The observer sustains near-offset-free tracking across a genuine contact-set switch and a scheduled support-mode transition, while disturbance estimation---not contact consistency alone---is the dominant source of fixed-stance accuracy; covariance inflation gives only scenario-dependent transient benefit.

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.

The recent popularity of robotics, combined with the steadily decreasing cost of robotic hardware, has lowered the entry barrier to robotics research and enabled rapid advancements in the field. One of the primary examples is the Unitree Go2 quadruped robot, which is often used by researchers in the areas of locomotion, navigation, control, and others. Many researchers use the Go2 robot in combination with techniques like imitation learning, reinforcement learning, and behavioral cloning to allow machine learning systems to take full control of the robot. At the same time, many of those techniques require demonstration data consisting of the robot's kinematics information and actions applied to the motors. Obtaining such data is difficult, requires building complex pipelines, and can take significant time. To aid in those kinds of efforts, we present Kine2Go - a dataset with 800 diverse gait kinematics trajectory motion data for the Unitree Go2 robot, derived from 40 distinct policies. Our pipeline accepts data from various quadruped morphologies and translates them to a Go2-compatible format. Then we use Reinforcement Learning to train policies following a given motion, and finally we gather data from those policies, which grants robust, perturbed kinematic data with corresponding motor-level actions.

For robots to work safely in household environments, they need to be compliant and react to torque and force feedback during contact. However, the majority of existing data collection pipelines still lack the ability to capture force and torque data for learning active compliant policies. In this paper, we present Universal Manipulation Exoskeleton (UME), an upper-limb exoskeleton that provides real-time haptic torque feedback while recording whole-arm configurations and joint torque signals for teleoperation. With transparent torque feedback, human operators can even unsheathe kinematically constrained objects while blindfolded. UME is low-cost, lightweight, and portable. Equipped with an embedded IMU, it enables teleoperation for mobile manipulation. With our proposed universal retargeting algorithm, UME can teleoperate a range of robots, including the 7DoF OpenArm, 7DoF Franka, and 6DoF X-ARM. We demonstrate that this combination of capabilities enables learning bimanual, whole-body, and active compliant policies that operate effectively in highly constrained spaces. The learned robust autonomous policies achieve high success rates across a variety of tasks, including long-horizon mobile manipulation, force-mediated box flipping, visually occluded box pushing, and space-constrained tabletop manipulation. Videos, code, and additional information can be found at https://ume-exo.github.io.

We present CORD-SLS, a real-time control method for safe deformable object manipulation, with a focus on ropes and cloth. At its core is a GPU-parallel differentiable simulator with contact smoothing which enables efficient gradient-based planning through intermittent contact. To robustly satisfy constraints under model and sensing uncertainty, we develop a real-time, GPU-parallel output-feedback robust model predictive control (MPC) algorithm that plans with this simulator. We further show that the simulator accelerates model-based RL for training neural manipulation policies. To improve real-world robustness, we use conformal prediction to calibrate visual-feedback and perception-error bounds for MPC, producing reachable tubes that enable high-probability safe control. We evaluate CORD-SLS on high-dimensional, contact-rich rope and cloth manipulation tasks in simulation and hardware, including obstacle avoidance, routing, folding, and smoothing. Across settings, CORD-SLS achieves millisecond-speed planning, exceeding baselines in safety, speed, and task success.

Humans rely on directional fingertip forces to probe and regulate contact during manipulation, yet most wearable haptic gloves render only vibration or single-axis force, leaving force direction ambiguous. Without directional cues, users must infer contact force from vision alone, often leading to over-pressing, inconsistent control, and reduced precision in robotic teleoperation. We present the N2D Haptic Glove, a multi-finger wearable device that renders planar flexion-extension fingertip forces using capstan-drive transmissions for high-transparency force feedback. Through benchtop validations and a user study involving haptic teleoperation of a robotic arm and hand, we demonstrate that compared to visual-only and single-axis haptic baselines, planar fingertip feedback significantly reduces contact force error during precise manipulation, improves trial-to-trial consistency, and enhances overall user experience in axial probing tasks. These findings establish the N2D Haptic Glove and directional finger-based haptics devices as a promising modality for contact-rich teleoperation, immersive virtual reality simulations, and robot learning from demonstrations. N2D Haptic Glove's hardware and software system will be fully open-sourced at \href{https://ucsdarclab.github.io/n2d-glove/}{this https URL}.

Contact-rich manipulation requires world models to capture complex interaction dynamics from heterogeneous visual and tactile observations, yet the representation properties that enable reliable predictive planning remain poorly understood. We present ContactWorld, a systematic study of vision-tactile representations across 12 contact-rich manipulation tasks. Through controlled evaluation within a unified world-model and planning framework, we find that representations preserving spatial structure and temporal continuity consistently support more accurate prediction and stronger planning performance. Point-cloud observations increase average success from 20.7% and 22.0% with wrist- and front-view RGB, respectively, to 32.1%. Tactile sensing provides further gains only when its representation is compatible with the visual modality, with point clouds and tactile force fields achieving the highest overall success rate of 36.1%. These advantages become more pronounced at increasing goal offsets, where prediction errors and contact uncertainty accumulate. Controlled representation studies and real-world experiments across four manipulation tasks further support these trends. Together, our results establish spatial structure, temporal continuity, and cross-modal compatibility as key principles for designing vision-tactile world models for contact-rich robotic manipulation.

Nonlinear dynamics and the strong couplings that arise between multiple effectors undermine the assumptions behind conventional, linear control allocation techniques. When flight enters regimes where nonlinear effects dominate, linear allocators exhibit reduced accuracy due to increased model mismatch, which subsequently degrades performance and robustness of the flight control system. High fidelity onboard models and black box data driven approaches can recover accuracy across the flight envelope, but respectively impose computational burdens prohibitive for real time allocation and sacrifice the interpretability required for verification and fault diagnosis. This paper addresses these limitations by learning an explicit, physics constrained analytical model of the control effectiveness mapping from representative flight data using Sparse Identification of Nonlinear Dynamics. The resulting mapping is compact, interpretable, and admits analytical derivatives, enabling efficient computation within nonlinear solvers that additionally incorporate actuator dynamics, without requiring an onboard model. An online adaptation mechanism monitors prediction residuals and refreshes the model when significant plant changes are detected, providing graceful reconfiguration under actuator failures and varying operating conditions. The methodology is evaluated on a high fidelity nonlinear benchmark aircraft across a range of aggressive maneuvers, achieving accuracy comparable to a full nonlinear onboard model while substantially reducing computational cost relative to established baselines.

Safe rehabilitation is an interaction-dynamics problem: the controller must regulate a prescribed motion while absorbing involuntary spasm, voluntary effort, actuator compliance, and model mismatch as interaction disturbances. This paper instantiates the predictive interaction-dynamics framework of the base pHRI formulation on a series-elastic-actuated knee joint. SEA feedforward reduces the gravity-compensated knee to the same constant-coefficient scalar double integrator used in the base framework, while a dynamic-residual measurement from spring deflection supplies an interaction-disturbance observation. A steady-state target converts the estimated disturbance into a cancelling input, and a finite-horizon quadratic program regulates deviations from that target under range-of-motion, torque, and velocity constraints. The evaluation is stiffness- and damping-matched so improvements cannot be attributed to higher impedance. Under a motion-opposing $15\unit{Nm}$ step, classical impedance and MPC without estimation produce about $500\unit{mrad}$ steady-state error, whereas Kalman-augmented interaction MPC reduces this to $1.17\unit{mrad}$ at 100Hz and $0.70\unit{mrad}$ at 500Hz; the 500~Hz peak is $7.27\unit{mrad}$. In 30 randomized trials, the 95th-percentile peak is $21.57\unit{mrad}$. Bounded Assist-as-Needed scheduling, a corrective-channel energy tank, inequality-constrained OSQP stress cases, direct MuJoCo execution, and a posture-clamped MyoSuite knee-slice run are implemented. The results support the SEA-knee instantiation of the interaction-dynamics framework while separating it from clinical intent recognition, full-system passivity, safety certification, hardware trials, and free-standing multi-joint validation.

Despite the success of vision-based generalist robotic policies, existing tactile-based policies remain tied to fixed embodiments and sensor setups. This is because tactile signals are highly heterogeneous across hardware, making cross-sensor generalization difficult. We present FTP-1,the first generalist foundation tactile policy pretrained to acquire transferable tactile manipulation abilities across diverse sensors and embodiments. FTP-1 supports varied tactile inputs, including image-, array-, and state-based signals, by using heterogeneous encoders to project them into unified morphology-aware latent tokens that are jointly modeled by a shared tactile Transformer expert. Pretrained on around 3,000 hours of tactile manipulation data aggregated from 26 data sources, spanning human and robot demonstrations across 21 sensors, FTP-1 learns tactile skills that transfer beyond the sensors seen during pretraining. Across downstream finetuning experiments spanning 5 hardware configurations, FTP-1 improves contact-rich manipulation on seen sensor setups by +17.2% and, surprisingly, transfers to two previously unseen tactile-sensor setups, achieving a +31% gain in success rate. FTP-1 establishes the first unified foundation baseline for tactile manipulation, providing future tactile policies with a shared model-level starting point. Pretrained models, datasets, training code and more visualization at https://ftp1-policy.github.io.

Most learned dexterous grasp generators relegate contact forces to a downstream verification step, so a kinematically-plausible pose can still violate the conditions for a stable physical grasp. We address this with EquiDexFlow, an SE(3)-equivariant flow-matching model that jointly predicts wrist pose, joint angles, fingertip contacts, surface normals, and contact forces from an object point cloud. Our architecture projects contacts onto the object surface and forces into the Coulomb friction cone by construction, so placement and friction compliance hold without loss penalties. We prove end-to-end SE(3) equivariance and verify it empirically over 200 rotations, with wrist residuals below $0.04^\circ$ and exactly zero joint deviation. Trained on 8,100 force-closure grasps across 81 objects for the 16-DoF Allegro Hand, our model achieves zero friction violations, the best composite score, and the lowest wrench residual among all ablation variants. We retarget decoded fingertip contacts to a 16-DoF LEAP Hand via per-finger inverse kinematics, and our hardware-feasible refinement places every joint at least 5% inside its actuator envelope while preserving wrench balance. On the physical robot, retargeted EquiDexFlow-decoded grasps complete open-loop pick-and-hold trials on all six test objects, with every asymmetric object succeeding at both the canonical pose and a $120^\circ$ co-rotation. Videos, code, and checkpoints are available at https://equidexflow.github.io.

Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

This paper introduces a novel tactile sensor for in-hand manipulation with slip-aware control that integrates velocity, force/torque, and pressure map sensing into a single device with a deformable contact pad. To the best of our knowledge, this is the first sensor to combine these sensing modalities within a single compliant structure. The sensor features a deformable contact surface and can robustly track both flat and curved surfaces across a wide range of materials. Its performance is evaluated through a comprehensive set of experiments that highlight both its capabilities and limitations. The sensor is designed for rapid and low-cost fabrication using a combination of standard PCB manufacturing and rapid prototyping techniques.

Dexterous hands are essential for fine-grained manipulation, but their hardware designs vary substantially across embodiments. Differences in kinematics, joint definitions, and degrees of freedom make it difficult to define a shared state representation compared with parallel grippers. As a result, dexterous-hand data remains fragmented and difficult to use for joint training. In this work, we propose the Unified Dexterous Hand Model (UDHM), which maps human and robot hand states into a shared 22-DoF semantic interface. Based on UDHM, we introduce UniDexTok, a retargeting-free state tokenizer that learns embodiment-conditioned discrete tokens from standardized real joint states. UniDexTok provides a unified representation for heterogeneous dexterous hands without relying on retargeting or simulation data. Compared with the recent baseline UniHM, UniDexTok reduces MPJAE from 15.63 degrees to 0.16 degrees and MPJPE from 18.51 mm to 0.18 mm, corresponding to error reductions of 98.98% and 99.03%, respectively. These results improve reconstruction from centimeter-scale to sub-millimeter accuracy. Experiments further show that data from other embodiments improves target-embodiment reconstruction accuracy, demonstrating the benefit of cross-embodiment tokenization. UniDexTok also shows strong zero-shot and few-shot reconstruction ability when new dexterous hands are introduced.

Although the study of human trajectory anomalies is critical for advancing spatial data mining, empirical research remains severely hindered by a pervasive lack of ground-truth datasets. Despite the availability of several real-world and simulated human trajectory collections, these datasets exclusively capture normal mobility patterns and lack annotated anomalies. This specific scarcity is fundamentally driven by the inherent statistical rarity of anomalous events, precluding the feasibility of conventional observational methods. Compounding this challenge, the systematic acquisition of large-scale mobility data is strictly bottlenecked by prohibitive costs and stringent privacy regulations. To overcome these fundamental limitations and establish a reliable human trajectory anomalies dataset with annotated ground truth, we introduce a novel, end-to-end generative framework designed to synthesize realistic trajectory anomalies at scale. Our architecture bridges the gap between purely synthetic mobility data and complex real-world physical constraints by operating directly on baseline simulated trajectories. We employ Large Language Model (LLM) agents to systematically inject semantically meaningful behavioral anomalies such as irregular out-of-distribution check-ins and skipped routine visits. To ensure rigorous spatial validity, the system leverages map-constrained routing reconstruction to recalculate the physical transitions between these LLM agent-modified staypoints. Moreover, to narrow the simulation-to-reality gap, we augment the resulting trajectories with a context-aware spatial noise model, parameterized by environmental and location-specific variables, to accurately emulate heterogeneous GPS sensor degradation.

We consider the nonprehensile object transportation task known as the waiter's problem, in which a robot must move an object balanced on a tray from one location to another. In contrast to prior works on the robotic waiter's problem, which make the robot tilt a tray rigidly held by its end effector (EE), we use a tray suspended from the EE by ropes, such that it behaves like a three-dimensional pendulum. Some prior works have actuated the robot so that the EE simulates the behavior of a pendulum, because pendular motion reduces the shear forces acting on the transported objects, minimizing the sliding of rigid objects and sloshing in containers of liquid. In contrast, our use of a real hanging tray allows us to obtain the benefits of pendular motion while only actuating a 3 degree-of-freedom (DOF) mobile base, rather than requiring a full 6-DOF manipulator arm. Our experiments in simulation and on real hardware show that the hanging tray substantially reduces both sliding and sloshing compared to a static, rigidly-grasped tray. Furthermore, we integrate the hanging tray into an interactive robot waiter demonstration, which uses computer vision to identify people with a raised hand and visual servoing to steer toward them and allow them to access the tray.

Embodied world models have emerged as a pivotal paradigm for visual robotic decision-making and interactive environment simulation. However, conventional embodied frameworks rely on low-dimensional structured action vectors (e.g., joint angles and end-effector poses), which suffer from limited expressive capacity, poor generalization across diverse embodiments, and unnatural dynamic modeling for complex physical interactions. To address these limitations, this paper proposesiMac (Image as Action Control), a novel unified control paradigm that treats raw visual images as native action representations for embodied world models. Departing from traditional explicit kinematic action encoding, iMac formulates continuous visual manipulation as image-based action tokens, which inherently encapsulate spatial motion intentions, interactive geometric constraints and subtle physical dynamics. We construct a dual-branch embodied architecture consisting of an image-action encoder and a dynamic world predictor: the encoder compresses target-driven visual images into compact action embeddings, while the predictor learns environment transition rules conditioned on image actions to achieve high-fidelity future state prediction and closed-loop embodied control. Extensive experiments are conducted on public embodied manipulation benchmarks and real-world robotic scenarios. The results demonstrate that iMac outperforms vector-based action control baselines in prediction accuracy, task success rate and cross-scene generalization ability. Moreover, our image-action design eliminates the reliance on manually defined action spaces, realizing flexible and universal control for heterogeneous embodied agents. This work provides an innovative visual-action perspective for embodied world models, offering a simple yet effective paradigm for scalable robotic perception and manipulation.

Conventional dynamics analysis of the human body is often constrained by the need for contact force and torque sensors and controlled laboratory environments. To address this issue, this study proposes an opticalmechanics kinematic-dynamic integrated estimation framework for multibody systems. Specifically, a constrained multibody model is established to describe the system dynamics, while image-measured kinematic quantities are used as non contact inputs for dynamic estimation. The unknown joint torque is then identified through a genetic-algorithm based optimization by minimizing the discrepancy between model-predicted and image-measured kinematic quan tities. Experimental validation on an air-bearing platform showed that the wrist joint torque estimated from image data achieved a mean absolute error of 0.46 Nm compared with sensor measurements. In the forward prediction test, the model-predicted angular velocity achieved a mean absolute error of 0.006 rad/s relative to the image-measured results. This study demonstrates the potential of combining image measurement and mechanical modeling for non-contact dynamic estimation in scenarios where direct force and torque measurement is difficult.

Vision-Language-Action (VLA) models have become a powerful framework for robotic manipulation, and recent studies have introduced tactile or force feedback into VLAs to address contact-rich tasks. However, these models are typically deployed as offline policies. When contact conditions shift from the training distribution, the policy cannot perform online adaptation, leading to problems such as inappropriate contact forces and inefficient retries. Therefore, we propose TORL-VLA, a tactile-guided online reinforcement learning framework that couples tactile feedback with policy refinement for contact-rich manipulation. Our method introduces a tactile-derived wrench-aware VLA to predict reference actions and future wrench sequences, while a lightweight online RL module is used to refine the reference actions. To stabilize learning from mixed exploratory policy-generated and human-intervention data, we introduce an intervention-censored critic that prevents post-intervention success from being wrongly credited to policy-generated actions preceding intervention. Real-robot experiments on long-horizon contact-rich tasks, including latch manipulation, coffee-cup placement, and egg handling, show that TORL-VLA improves success rates at both subtask and full-task levels, as well as time-bounded execution efficiency over strong baselines. Project page: https://torl-vla.github.io/

Generating high-quality dexterous grasps remains challenging for learning-based methods, which often depend on carefully tuned contact losses or costly contact-based test-time refinement. We present KPGrasp, a flow-matching framework that learns dexterous grasp priors from large-scale data rather than relying on contact losses or contact-based test-time refinement. KPGrasp couples an all-Euclidean 3D hand-keypoint parameterization with a simple yet scalable Transformer flow model. The parameterization avoids the drawbacks of the conventional mixed SE(3) pose and joint-angle output space, expresses grasps in the same frame as the object point cloud, and thus enables native spatial reasoning; the Transformer flow model is trained with only the standard flow-matching loss and scales effectively with data, model capacity, and batch size. Experiments demonstrate state-of-the-art performance on two simulation benchmarks. On the Dexonomy benchmark, it reaches a 76.3% grasp success rate, improving over the strongest directly comparable baseline by 47.4% while reducing penetration depth to 2.4 mm. The same model also achieves the best average performance on the DexGrasp Anything benchmark without fine-tuning. For batched inference, KPGrasp requires only 0.032 s per grasp. Finally, real-world experiments on 20 diverse objects demonstrate that the pipeline can be deployed in a real-world setup.

Force signals provide critical interaction cues for contact-rich robotic manipulation. However, existing methods mostly use force as an additional observation modality, without fully exploiting its role in modeling future interaction dynamics or guiding execution-time feedback correction. In this paper, we propose FAWAM, a force-aware world action model that incorporates force information at three levels: perception, prediction, and closed-loop execution. FAWAM first encodes historical 6-axis force/torque signals to modulate action generation, then jointly predicts future actions and end-effector wrenches to explicitly model contact evolution. It further introduces a residual correction module that uses the predicted wrench trajectory as an execution-time reference to refine actions online based on real-time force feedback. Real-world experiments across multiple contact-rich tasks show that FAWAM improves the average success rate by 36.25% over vision-only baselines and 21.25% over existing force-aware baselines, demonstrating the effectiveness of our force-aware framework for robust contact-rich manipulation.

Monopedal hopping robots are conceptually simple but highly dynamic and inherently unstable. Achieving robust 3D hopping is still difficult because ground reaction forces are available only during the short stance phase, while the robot is underactuated in flight. A key unresolved issue is how to improve flight-phase control authority. Propeller assistance provides a promising solution, but it requires careful coordination of leg-generated contact forces and propeller thrusts across stance and flight. This paper presents Pro-OMEGA2, a propeller-assisted 3D monopedal hopping robot with an active 3-RSR parallel leg and a trunk-mounted tri-rotor for auxiliary attitude regulation. To address the force coordination challenge, we propose a Hierarchical Force Allocation (HFA) framework based on a single rigid body (SRB) model. The leg generates the main stance contact wrench, while the tri-rotor provides auxiliary attitude regulation, compensating the residual attitude moment in stance and maintaining attitude during flight. Real-robot experiments in indoor and outdoor scenarios demonstrate sustained 3D hopping, including terrain transitions and impulsive push recovery, validating robustness under unmodeled contact and external disturbances.

Ground contact forces acting on the human body, are crucial for biomechanics studies or sport performance analysis. Prior methods rely on force plates or pressure mats to collect ground contact dynamics, limiting their applicability to carefully controlled settings. A more scalable solution is to estimate the dynamics directly from motion capture data. Recent approaches only roughly estimate the ground contact dynamics from the vertical distance between the body and the ground plane, which cannot capture the complex pressure distribution of all contact points. To this end, we propose GraCE -- Gravity-guided Contact Dynamics Estimation, a novel full-body contact dynamics model for human motions using a realistic influence of body mass distribution and gravity. We use the human's center of gravity to estimate the ground contacts based on its relative distance to the human body. The applied force on each contact is estimated via the product of predicted contact probabilities and the total exterior force computed from the center of mass trajectory. We outperform related work on the GroundLink dataset for ground reaction force estimation, and on the MOYO dataset for detailed contact pressure prediction. The code is published at https://github.com/cuongle1206/GraCE

This work presents a compliance-based sensor placement method for force sensing on a sensorized prostate phantom designed for Digital Rectal Examination training. The phantom combines three internal pneumatic chambers, used as intrinsic pressure sensors, with ten surface displacement markers. A finite-element simulation dataset is generated by applying external forces at sampled surface locations, from which a compliance matrix relating force inputs to pressure and displacement responses is constructed. Based on this matrix, we propose a weighted greedy selection strategy that maximizes local force reconstructability while prioritizing the clinically relevant posterior contact region and avoiding marker placement directly within the Region of Interest. Compared with a global QR-based placement strategy, the proposed method increases the mean reconstructability score in the target region by 22.5%. These results suggest that region-aware sparse sensor placement can improve force observability in soft robotic medical phantoms while maintaining a limited and practical sensing configuration.