Contact-Rich Manipulation

We present PinFT, a miniature five-axis capacitive force/torque sensor designed for direct tip-level integration into tweezer-like tools. The sensor employs a compact three-PCB stack with segmented plated through-hole electrodes and a silicone elastomer dielectric, enabling five-degree-of-freedom force and torque sensing ($F_x$, $F_y$, $F_z$, $T_x$, $T_y$) through displacement of a central 2,mm-diameter stainless steel pin. The fabricated prototype was calibrated using a higher-order polynomial mapping, yielding mean absolute errors of approximately 0.23,N for forces and 2.5,mN$\cdot$m for torques, with coefficients of determination ($R^2$) exceeding 0.97 across all axes. To demonstrate practical utility, a 3D-printed tweezer integrating PinFT sensors at both tips was mounted on a parallel-jaw gripper and evaluated across three representative manipulation tasks: grasping a sub-millimeter SMD capacitor, pulling a simulated hair from a silicone substrate, and tearing a compliant silicone specimen. In all cases, per-tip force sensing reliably captured characteristic force signatures that distinguish successful manipulation from failure events -- including slip and object ejection -- using gradient-based features derived from internal grasp force and net interaction force. These results demonstrate that direct, per-tip force sensing enables standard parallel-jaw grippers to monitor and interpret fine manipulation tasks performed through a handheld tweezer.

In many real-world systems, including articulated robots and biomechanical models, rotations are defined in joint space and naturally parameterized by Euler angles with bounded ranges. Yet regressing Euler angles remains challenging, as their discontinuities and singularities often destabilize training. In this work, we revisit Euler-angle regression and show that its effectiveness depends critically on the interaction between rotation representation, regression architecture, and domain constraints. We introduce a new framework that combines range-aware Euler modeling with Kolmogorov-Arnold Networks (KAN), which replace fixed node-wise activations with learnable univariate functions on edges. We further provide theoretical analysis indicating that bounded Euler ranges motivate a near-additive structure in the regression function, which favors the additive functional form of KAN, and we confirm this trend empirically. Extensive experiments on controlled rotation regression, object pose estimation, and robotic and human inverse kinematics demonstrate consistent improvements in accuracy, convergence, and efficiency. The code will be publicly available.

Robotic manipulation tasks often require simultaneous reasoning over motion and contact forces, yet most Learning from Demonstration (LfD) methods model only spatial trajectories and neglect force interactions with the environment. This limitation reduces robustness and can lead to unsafe or inconsistent task reproduction in force-constrained settings. We propose a novel one-shot multimodal LfD framework for the segmentation, encoding, and reproduction of force-inclusive demonstrations. First, we introduce a multimodal probabilistic segmentation method that adaptively weighs spatial and force modalities over time, enabling the automatic extraction of force-aware motion primitives. Second, we extend the elastic maps representation to incorporate external force constraints during skill encoding and formulate a convex optimization procedure for learning force-consistent trajectory models. The resulting skills reproduce both motion and contact characteristics from a single demonstration while promoting safer execution by accounting for demonstrated force profiles. We validate our approach on five real-world manipulation tasks across two distinct force-sensing configurations: wrist force sensing on a UR5e with a Robotiq 2f-85 gripper and finger force sensing on a Kinova Gen3 with an Openhand Model O gripper. Experimental results demonstrate robust multimodal segmentation, accurate force-aware reproduction, and cross-platform generality.

We aim to address the challenge of teleoperating robotic arms for high-degree-of-freedom (high-DoF) manipulation tasks, which is cognitively demanding and error-prone, particularly when relying on low-bandwidth interfaces. We propose Robot Trajectron V3 (RT-V3), a probabilistic shared control framework designed for $SE(3)$ grasping tasks. RT-V3 formulates shared control as Bayesian inference by learning a prior over user intent and combining it with real-time user commands to estimate the posterior intent distribution. The prior models user intent as a distribution over future trajectories conditioned on past robot dynamics and visual scene context. The intent prior is parameterized by a transformer-based conditional generative model that reasons over point clouds and candidate grasp poses, together with a factorized translation-rotation representation that improves learning efficiency in high-dimensional action spaces. During execution, RT-V3 continuously estimates the posterior distribution over future trajectories by combining the learned intent prior with a user-command likelihood derived from the observed control input, enabling continuous intent refinement and shared assistance. Comprehensive experiments demonstrate that RT-V3 achieves high accuracy in trajectory prediction and competitive performance in reactive planning. Furthermore, real-world user studies indicate that RT-V3 significantly outperforms baseline methods in terms of success rate and efficiency, while substantially reducing the user's physical and mental workload.

Dysgraphia is a specific learning disability that is prevalent among school-age children. It affects handwriting coherence, quality, fluency, and legibility, often hindering academic achievement and early learning development. This motor coordination disorder is typically diagnosed through subjective assessments based on clinician observation, which can be timeconsuming and prone to variability. In this paper, we introduce a deep learning-based framework for objective dysgraphia detection using online handwriting data captured via digitizing tablets. The proposed framework relies on two complementary branches: the first pipeline extracts both handcrafted and embedding-based kinematic features directly from raw temporal signals, while the second leverages image-based representations of the temporal signals generated using continuous wavelet transforms (CWT) and Gramian Angular Fields (GAF). The resulting features are then fused to leverage the complementary strengths of both representations. The four representations were evaluated separately and jointly using the publicly available DiaGraMo dataset, showing that the fusion of GAF, MOMENT, and hand-crafted kinematic features outperforms each individual representation, as well as other fusion schemes. These findings highlight the potential of the complementarity of image and signal based representations for more objective dysgraphia detection.

Whole-arm manipulation involves direct contact with the environment while the robot completes a task by distributing contact across multiple links as contacts form, slide, and break. This setting breaks common implicit assumptions in many learning-based manipulation pipelines: arm configuration tightly couples motion and contact forces, contact state is partially observed under occlusion, and purely learned rollouts can become physically inconsistent under distribution shift because many multi-link contact configurations are sparsely represented in the data. To address this, we propose TACTIC (Tactile and Vision Conditioned Contact-Centric Control), a receding-horizon controller for whole-arm manipulation. TACTIC uses a contact-centric hybrid predictive model that combines RGB-D, distributed tactile sensing, and a compact 2D proximity representation. The model couples a learned, action-conditioned latent dynamics model with analytical kinematics through contact Jacobians, enabling rollouts of future contact configurations and interaction forces. TACTIC integrates these rollouts into a sampling-based MPC planner with contact-aware action sampling: contact Jacobian-based projections steer sampled action sequences toward force-modulating directions, and objectives defined over predicted proximity and interaction forces trade task progress against whole-arm force regulation. We evaluate TACTIC in simulation against state-of-the-art model-based and model-free methods, and perform ablations that isolate the contribution of each design choice. TACTIC consistently outperforms other methods. We further demonstrate real-world performance on a robot with distributed tactile sensing across three whole-arm manipulation tasks that require multi-contact trajectories: turning over and repositioning a manikin, and goal-reaching in a 3D dynamic maze. Website: https://emprise.cs.cornell.edu/tactic

Accurate dynamics modeling of Brushless DC (BLDC) motors is fundamental to high-performance robotic joint control. This paper presents a Physics-Informed Neural Network (PINN) with a deep residual (ResNet) backbone that learns a continuous-time surrogate of the full six-state BLDC motor dynamics. Given simulation time, applied three-phase voltages, and excitation parameters as inputs, the network directly predicts all motor state variables -- rotor angle, angular velocity, three-phase currents, and winding temperature -- while simultaneously satisfying the governing electromechanical and thermal ODEs through a composite physics-data loss. A curriculum scheduling strategy gradually activates the physics penalty to prevent premature convergence. Training runs are completed in under two minutes on a standard CPU. Crucially, once trained, PINN inference achieves latencies of 0.1--22, mu s per query, up to 118x faster than conventional ODE solvers, making it suitable for real-time observer and control applications.

Keypoint tracking alone is insufficient for object interaction tasks such as sitting on a chair, wiping a board, or pushing furniture, where the robot can reach the correct pose without making meaningful physical contact with the object. We present CONTACTMIMIC, a learning framework that tracks explicit partlevel binary contact commands alongside keypoint trajectories. CONTACTMIMIC is made possible through the use of contact-following rewards and a trajectory augmentation scheme aimed at breaking the correlations between keypoint trajectories and contact labels. The resulting policy successfully decouples contact behavior from keypoint geometry, and achieves precise physical contact as well as contact-controllability (produce or suppress contact during deployment as desired). Simulation experiments across 10 diverse human-object interaction motions confirm that CONTACTMIMIC exhibits contact controllability that enables it to complete manipulation tasks without task-specific rewards, while also outperforming keypoint-only trackers on contact-relevant tasks. Ablations confirm the necessity of the proposed trajectory augmentation scheme and sim2real deployment validates contact controllability in the real world across 5 different motions. Video results are available on https://lixinyao11.github.io/contactmimic-page/.

Safe navigation in dynamic environments is challenging when system dynamics are unknown and actuator inputs are limited. Existing methods either rely on accurate models, require online optimization, or do not explicitly account for input constraints. This paper presents a real-time control framework for unknown Euler-Lagrange systems that guarantees finite-time reach-avoid-stay (FT-RAS) specifications while respecting actuator limits. We extend the spatiotemporal tube (STT) framework by incorporating input constraints into the controller design and derive offline-verifiable feasibility conditions that relate the available control authority to the tube design and uncertainty bounds. The resulting framework is approximation-free and computationally efficient, making it suitable for real-time implementation. The proposed approach is validated through simulations on a mobile robot, a quadrotor, and a spacecraft, together with hardware experiments on a mobile robot, demonstrating safe navigation while satisfying actuator constraints.

Robotic surface swabbing requires sustained interaction between a compliant tool and heterogeneous environments, where accurate estimation of tip-level contact force is critical for consistent sampling performance. However, deformable tool dynamics introduce nonlinear viscoelastic hysteresis that decouples wrist-mounted force measurements from true contact forces, while tool-integrated sensors are impractical for deployment due to sterility and disposability constraints. This paper presents a data-driven framework for contact force estimation in Deformable Tool Manipulation (DTM) that leverages proprioceptive sensing without requiring explicit physical models or permanent embedded sensing hardware at the tool tip. A recurrent architecture is first identified through a comparative evaluation of temporal models, where a compact LSTM achieves the lowest estimation error and sub-millisecond inference latency. To address generalization across unseen surfaces and tool compliance conditions, we introduce a parameter-isolated few-shot adaptation strategy that augments a frozen recurrent backbone with low-dimensional context embeddings using feature-wise linear modulation (FiLM). Experiments on a UR5e platform across nine tool-surface interaction regimes demonstrate that the proposed approach significantly improves robustness under domain shift, reducing zero-shot estimation error by up to 63% while preserving baseline performance without catastrophic forgetting. These results show that separating shared deformation-history dynamics from domain-specific conditioning enables reliable force estimation for DTM in non-stationary environments.

Long-horizon failure in world models is conventionally attributed to compounding error, a generic framing that does not distinguish what kind of error compounds. We propose a kinematic-vs-dynamic reframing: world models tend to imagine kinematically rather than dynamically. We operationalize this as the imagined Kinematic-Consistency Error, a per-step diagnostic that measures how far a rollout departs from a closed-form kinematic null, paired with a perturbation protocol that tests whether iKCE responds when physical conditions cross a regime boundary. We instantiate the diagnostic on a released DreamerV3 checkpoint trained on DMC walker-walk, where imagined iKCE runs roughly two orders of magnitude above that of matched real-physics rollouts. Across a friction sweep that crosses the gait-collapse boundary, the model's iKCE stays statistically flat even as the trained policy's reward collapses through the same range, providing the kinematic-not-dynamic signature. The diagnostic distinguishes kinematic from dynamic imagination at horizons longer than the embodiment's gait period.

Trajectory planning strongly influences tracking accuracy, actuator demand, and overall execution behavior in robotic manipulators. Classical planners such as cubic, quintic, and trapezoidal profiles are widely used for their simplicity and smoothness, yet they remain purely kinematic and ignore system dynamics and control effort during trajectory generation. As a result, nominally smooth trajectories can lead to inefficient nonlinear execution and increased corrective control action. This paper presents a control-aware optimal trajectory planning framework that explicitly incorporates manipulator dynamics and actuator effort within a finite-horizon formulation. A midpoint linearization strategy is introduced to improve approximation accuracy for large point-to-point motions. In contrast to prior comparisons, the proposed approach enables fair, isolated evaluation of trajectory generation effects under identical closed-loop nonlinear execution conditions. To this end, a unified evaluation framework is developed in which all planners are executed under identical nonlinear dynamics, controller structure, and actuator constraints. Simulations on a nonlinear simplified UR5 manipulator show that the proposed approach consistently reduces tracking error, corrective torque, and closed-loop execution cost compared to classical methods, achieving substantial reductions in actuator effort and execution cost across all evaluated scenarios, demonstrating that kinematic smoothness alone does not ensure dynamically efficient execution.

Human-like dexterous hands with multiple fingers offer human-level manipulation capabilities but remain difficult to train the control policies that can deploy on real hardware due to contact-rich physics and imperfect actuation. We present a sim-to-real reinforcement learning method that leverages dense tactile feedback combined with joint torque sensing to explicitly regulate physical interactions. To enable effective sim-to-real transfer, we introduce (i) a computationally fast tactile simulation that computes distances between dense virtual tactile units and the object via parallel forward kinematics, providing high-rate, high-resolution touch signals needed by RL; (ii) a current-to-torque calibration that eliminates the need for torque sensors on dexterous hands by mapping motor current to joint torque; and (iii) actuator dynamics modeling with randomization to account for non-ideal torque-speed effects and bridge the actuation gaps. Using an asymmetric actor-critic PPO pipeline, we train policies entirely in simulation and deploy them directly to a five-finger hand. The resulting policies demonstrate two essential human-hand skills: (1) command-based controllable grasp force tracking and (2) reorientation of objects in the hand, both of which are robustly executed without fine-tuning on the robot. By combining tactile and torque in the observation space with scalable sensing and actuation modeling, our system provides a practical solution to achieve reliable dexterous manipulation. To our knowledge, this is the first demonstration of controllable grasping on a multi-finger dexterous hand trained entirely in simulation and transferred zero-shot on real hardware.

Decoding hand kinematics from surface electromyography (EMG) is a core challenge in wearable biosignal processing with clinical relevance for prosthetic control and motor rehabilitation. Most representation learning approaches for EMG focus on discrete gesture classification, and few focus on continuous regression. We present KinEMbed, a cross-modal contrastive learning framework for hand kinematics regression that jointly trains dual encoders -- one for windowed EMG features and one for kinematic (joint angle) targets. The resulting embeddings inherit the geometric structure of the kinematic space without requiring kinematic signals at inference time. Evaluating on the NinaPro DB8 dataset that includes both able-bodied users and subjects with limb difference (N=11), KinEMbed outperforms PCA, PLS, autoencoder and contrastive (CEBRA) baselines on held-out sessions, with largest gains on the most challenging thumb degrees of articulation. We position this work as a first step toward contrastive representation learning for regression of hand kinematics from structured wearable biosignals.

As haptic interfaces integrate more seamlessly into wearables and everyday environments, they increasingly require actuators that are soft, thin, silent, and energy efficient. However, conventional motors and temperature-responsive polymers often struggle to deliver these properties due to their bulky form factors and high power consumption. High-Voltage Electrostatic Actuators (HVEAs), which generate force by applying an electric field to localized charge concentrations using high voltages and ultra-low currents, have recently emerged as a compelling alternative due to their fast, silent, and low-power operation within highly customizable and compliant form factors. This paper presents a focused review of HVEAs for haptics, examining four major classes: electrostatic switchable adhesives, dielectric elastomer actuators, soft electrohydraulic actuators, and electrokinetic pumps. For each class, we describe their mechanisms that enable haptic output; characterize their bandwidths, force densities, and spatial scalability; and evaluate their versatility for rendering cutaneous and kinesthetic feedback across wearable and world-grounded interfaces. Through this cross-technology analysis, we identify common design constraints and emerging strategies for improving ergonomics, streamlining fabrication, and integrating self-sensing. We conclude by outlining where HVEAs are uniquely positioned to advance haptic interaction and highlighting key research directions needed to translate these technologies into practical systems.

Aerial physical interaction represents a promising direction for next-generation unmanned aerial vehicles (UAVs), but it requires an aerial platform that can exert contact forces while maintaining stable flight. For close-proximity tasks, this translates into three coupled design requirements: multidimensional wrench generation for stable contact, compactness for maneuverability and safety in confined spaces, and reduced lateral airflow toward the target when generating horizontal force. This article presents FLOAT Drone, a fully actuated coaxial UAV with servo-driven control surfaces for close-proximity physical interaction. The coaxial dual-rotor layout provides a compact propulsion layout, while the control surfaces, immersed in the rotor downwash, generate lateral forces and moments for 6-DoF wrench generation. A force-matched computational fluid dynamics (CFD) comparison with a tilted-rotor alternative quantifies the reduction in target-facing lateral airflow. To account for nonlinear rotor--control-surface coupling in the rotor wake, a high-fidelity polynomial aerodynamic wrench model is identified from precision force measurements and embedded in a constrained nonlinear allocator for real-time wrench tracking. Comparative flight and interaction experiments show that the proposed framework improves control accuracy over linear allocation baselines, rejects ground-effect and payload disturbances, and enables close-proximity drawer push--pull manipulation through a $2~\mathrm{cm}$ handle clearance.

Employing multiple manipulators can boost efficiency and accomplish tasks that a single manipulator cannot do. However, real-time planning for multiple manipulators in a cluttered workspace still poses significant challenges for planning algorithms. This article proposes a new planning algorithm called Conflict-Based Lazy Search (CBLS) for multimanipulator planning. CBLS is built on Conflict-Based Search (CBS), an efficient multiagent pathfinding (MAPF) algorithm that has shown an order of magnitude speedup over previous approaches [1], [2]. CBS addresses MAPF by solving many single-agent pathfinding (SAPF) problems. Thus, its planning time directly depends on the efficiency of the SAPF algorithm adopted. Our CBLS algorithm enhances CBS with precomputation and lazy search. First, a lazily evaluated graph with controlled sparsity is precomputed for a single manipulator. Second, we propose the Lazy Edged-based A* (LEA*) for efficient SAPF. Since edge evaluation is the computational bottleneck of manipulator planning, LEA* uses lazy search and an edge queue to reduce the number of edge evaluations. We show that LEA* is optimally vertex efficient and has improved edge efficiency compared to A*. We apply the proposed CBLS to multi-manipulator planning problems and show its superior performance by comparing it with CBS and a sampling-based algorithm, namely, RRT-Connect.

Sampling-based motion planners have been shown to be effective for systems with complex kinodynamic constraints and high dimensionality. However, these algorithms struggle to achieve real-time performance, leading to recent efforts to parallelize planning. While GPU-accelerated planners have achieved significant speedups, existing approaches require specialized CUDA programming that limits accessibility and portability. We present Parallel Asymptotically Optimal Kinodynamic RRT (PAKR), a massively parallel kinodynamic planner leveraging JAX and the XLA compiler to achieve GPU acceleration through standard Python tooling. By combining our parallel planner with the AO-x meta-algorithm, we achieve asymptotic optimality through fast iterative replanning. We provide a theoretical analysis of probabilistic completeness, analyze the effects of batch size and branching factor on convergence, and demonstrate scalability to complex dynamics using the MuJoCo-XLA simulator. Experiments show competitive runtimes with state-of-the-art GPU planners and superior solution quality.

Compliance is essential for dexterous manipulation, yet existing solutions often rely on external tactile or force sensors that are costly, fragile, and difficult to deploy on low-cost robot hands. We propose a proprioception-driven framework that learns contact-aware compliance cues from motor current and joint states. Since motor current is closely related to actuator torque, it provides an intrinsic signal for perceiving contact force, object resistance, and grasp stability without additional sensing hardware. Rather than estimating external wrenches or commanding torque, our method predicts a compliance reference position: an ideal joint-position target for a standard PD controller whose induced position error generates appropriate grasping force. This position-based formulation is compatible with mainstream teleoperation and policy-learning pipelines, while enabling the robot to adapt interaction forces from real-time proprioceptive feedback. Thus, motor current serves not only as a force proxy but also as a learnable proprioceptive contact signal for compliance reference prediction. Experiments on multiple dexterous hands and contact-rich tasks, including fragile object handling, sustained surface contact, thin-object retrieval, and dynamic load adaptation, show stable compliant grasping, safer and more efficient teleoperation, and improved downstream policy learning without external tactile or force sensors.

Tactile perception is indispensable for contact-rich manipulation, yet integrating it into Vision-Language-Action (VLA) models often induces modality collapse, where high-bandwidth visual features overshadow sparse tactile cues. Inspired by Predictive Coding, a neural mechanism where the brain attenuates predictable inputs to prioritize surprising stimuli, we propose ResTacVLA. Rather than treating tactile data as raw input, we reformulate it as a Residual Tactile Representation capturing the discrepancy between visual priors and physical sensations. By filtering out visually predictable dynamics, this formulation transforms sparse tactile signals into dense, high-value information gain, thereby inherently resolving the bandwidth mismatch. These residuals are discretized through a Vector Quantized (VQ) bottleneck into Latent Contact Primitives that capture critical events missed by vision. Analogous to the neural surprise signal, we leverage the uncertainty of the visual prior to adaptively gate tactile integration, prioritizing residuals specifically during visually unreliable phases to explicitly prevent visual dominance. Experimental results show that ResTacVLA consistently outperforms all baselines on a diverse set of contact-rich manipulation tasks, while remaining robust to unexpected dynamic disturbances. Project page: https://awilekong.github.io/ResTacVLA/

Continuum manipulators mounted on multi-rotor UAVs enable compliant aerial manipulation, but payloads and propeller downwash amplify out-of-plane bending and twisting that degrade end-effector pose accuracy. To address this problem, we present a universal-joint-based continuum manipulator designed to improve resistance to out-of-plane deformation during aerial manipulation. The proposed design uses a tubular backbone with spring-reinforced universal joints and an integrated conduit for internal routing and fluid delivery. We evaluate the design in still air and under peak propeller downwash across varying payloads, and benchmark it against a prior Nitinol-backbone CM. Bench tests show improved resistance to out-of-plane deformation across all conditions. Under peak downwash, the proposed design reduces mean error by 2.5-4x in yaw, 2-45x in y-axis, and up to 5x in roll compared to the NiTi-backbone design. We further analyze hover stability through in-flight coupled-disturbance tests over varying payloads and actuation speeds, and demonstrate the system in water sampling, spot spraying, and object transport.

Infrastructure maintenance, contact-based inspection, and emergency response can benefit from aerial vehicles that act as a flying human hand with extreme maneuverability, manipulation, and resiliency (MMR): maneuverability to fly in arbitrary orientations to reach remote and tight locations; manipulation to point sensors, turn valves, and press tools at arbitrary orientations; resiliency to maintain accurate motion and force control despite disturbances from arbitrary directions, such as wind, ground effects, and friction. Realizing MMR on aerial vehicles requires not only omnidirectional flight; it also requires (I) vectoring of maximum thrust in any direction, to maximize capacity for contact-force application and disturbance rejection, (II) global stability, to enable control over any orientation/position, and (III) compact, standard designs that build upon platforms such as quadrotors to inherit technological know-how. No current aerial vehicle simultaneously enables I--III, due to structural and control limitations that constrain actuation. We present MorphQuad: a morphable quadrotor that enjoys MMR. Key to our approach is a hardware and control co-design: on hardware, we independently articulate each of the four rotor systems via two-axis gimbals; on control, we introduce globally-stable control, and energy-optimal thrust allocation that permits inter-rotor thrust cancellations only to avoid downwash interference and gimbal lock. With fully-onboard autonomy, MorphQuad demonstrates multi-revolution rotation while translating or hovering, for pipe inspection and target tracking (maneuverability); valve turning, perching, and object pressing and pushing with human-level strengths (manipulation); and wind rejection from any direction, even directed to a single rotor, and push-pull recovery (resiliency).

This paper presents an intelligent control framework for trajectory tracking of robotic manipulators using radial basis function (RBF) neural networks for online disturbance estimation. The proposed control structure combines model-based nonlinear control with an adaptive neural approximator that compensates for parametric uncertainties, friction, and unmodeled dynamics. A Lyapunov-based adaptation law with projection guarantees boundedness of the closed-loop signals and convergence of the tracking error to a compact region. The primary objective of this work is to investigate how the choice of activation function within the RBF network influences transient behavior, steady-state accuracy, and control smoothness. The controller is implemented on a robotic manipulator. Experimental results demonstrate that although stability is preserved for all kernels, activation function selection significantly affects adaptation dynamics and practical tracking performance. These findings demonstrate that activation function selection acts as a structural design parameter in intelligent control, directly shaping adaptation dynamics and practical closed-loop performance.

Patient-specific anatomical models provide individualized context for surgical planning, image-guided intervention, and algorithm development. However, most CT-derived models are static: they preserve the body configuration captured at scan time, but cannot represent how the same anatomy would appear after patient repositioning. This limitation is especially important for radiographic imaging, where appearance depends jointly on imaging geometry and patient pose. We present a proof-of-concept for constructing a patient-specific articulated digital twin from a single full-body CT scan. The method fits a parametric human body model (SMPL) to obtain a patient-aligned kinematic scaffold, binds segmented bones and organs to an anatomy-aware rig, and retargets body-pose changes while preserving skeletal geometry. On three full-body CT subjects, the fitted scaffold achieved 15.8 $\pm$ 4.0 mm chamfer distance and 95.9 $\pm$ 1.8% skeletal enclosure. Recomposition at the acquisition pose preserved major radiographic structure, with overall SSIM of 0.872 $\pm$ 0.016 and PSNR of 18.5 $\pm$ 1.4 dB across paired DRRs. Across unseen target poses, the resulting twins enabled articulation while maintaining high skeletal enclosure (94.4 $\pm$ 0.4%). As a feasibility demonstration, we render the articulated twin as pose-dependent DRRs. These results suggest the feasibility of extending static, view-controllable CT simulation toward pose-controllable anatomical twins for future synthetic imaging and positioning studies.

The key challenge in articulated 3D object generation from a single image is accurately predicting the underlying kinematic structure. Existing methods either infer kinematic parameters directly from a static image that lacks dynamic part-level kinematic relationships, or estimate parameters from visual dynamics generated from a single image, which is prone to accumulated errors of two steps. Moreover, the limited scale and diversity of existing annotated datasets further hinder generalization to complex, real-world objects. To overcome these limitations, we propose to learn the joint distribution of visual dynamics and kinematic parameters. Recognizing that articulated objects can be formulated as dynamic systems, we propose a unified Part World Model called PWM-ArtGen. To leverage unannotated data, this model couples action diffusion and image diffusion with independent diffusion timesteps, which enables visual branch co-training. We further curate a photorealistic dataset of 19.7k part-level image pairs without kinematic annotations, to support co-training. Experiments demonstrate that PWM-ArtGen substantially outperforms existing baselines in the resting state and exhibits strong zero-shot generalization to out-of-distribution objects.

Text driven hand object interaction (HOI) generation is gaining attention for immersive applications and robotics, yet producing physically plausible interactions remains challenging. Even when individual motions appear natural, small contact errors can cause conspicuous artifacts such as floating and interpenetration. Prior methods mitigate these issues using explicit contact cues or implicit grasp priors, but typically rely on multi stage pipelines and fail to model temporally evolving contact. We present JointHOI, a single stage diffusion framework that jointly generates 3D hand object motion and dynamic, distance based contact maps from text. By treating contact as an auxiliary inner modality, joint generation enables the model to learn contact motion coupling during training. At inference, contact guided sampling enforces consistency between generated contact maps and motion implied geometry, improving temporal stability and reducing penetration and floating. Experiments on GRAB and ARCTIC demonstrate consistent improvements in text adherence and physical plausibility over prior methods.

We present a fully unsupervised Fast-Slow DSVDD detector for continuous State-of-Polarization monitoring on a deployed subsea cable. Trained without event labels, it ranks all five confirmed trawler contacts within the top 13 of 122,174 recordings and surfaces additional corroborated cable-contact events.

Robot-environment interactions in dynamic or unstructured settings are often degraded by impact shocks, vibrations, and uncertainties in contact geometry and mechanical properties. This paper proposes an interaction architecture that combines feedback-linearized hybrid position-force control with a passive compliant degree of freedom embedded at the end-effector. Unlike conventional hybrid position-force control, which relies mainly on active feedback, force sensing, and gain tuning, the proposed architecture uses a physical spring-damper interface to store and dissipate impact energy at the contact point before high-frequency shocks propagate to the actuated joints and force-control loop. The approach is evaluated in MATLAB/Simulink on a 2-DOF planar manipulator with three end-effector configurations: rigid, spring-only, and spring-damper. Results under fixed and time-varying interaction conditions show that the spring-damper configuration provides stronger attenuation of contact-induced oscillations, lower force and velocity error variance, and smoother joint-torque response. Representative reductions include 36.5% in fixed-environment tangential force-error standard deviation, 25.4% in variable-environment normal force-error standard deviation, and 41.1% in variable-environment normal velocity-error standard deviation.

We present STT-LfD, a unified Learning from Demonstration (LfD) framework that integrates motion learning with control for unknown Euler-Lagrange systems. Unlike traditional decoupled approaches that track a fixed reference, the proposed method treats demonstrations as a data-driven safety specification. Using heteroscedastic Gaussian Processes, STT-LfD learns Spatiotemporal Tubes (STTs) as an intent envelope that capture time-varying precision requirements of a task. A closed-form feedback controller then enforces these learned constraints while respecting actuator limits, without requiring explicit system identification. The approach preserves the temporal structure of demonstrations, remains computationally efficient, and avoids explicit system identification. Hardware experiments on a mobile robot and a 7-DOF manipulator show that it outperforms baselines in robustness to disturbances and computational speed.

Redundant robotic manipulators operating in constrained and human-interactive environments require accurate task-space tracking together with rigorous safety guarantees under dynamic uncertainties. Classical operational space computed torque controller (OSCTC) relies on accurate dynamic models and degrades in the presence of disturbances. In contrast, the data-driven paradigm of residual learning approximates disturbances as functions learned from full-state measurements, which are often noisy in practice, lack rigorous theoretical guarantees, and introduce additional design complexity. This paper proposes a robust OSCTC framework that integrates an extended state observer (ESO) with conformal prediction to combine model-based robustness and data-driven adaptability. The ESO estimates lumped disturbances directly in operational space without requiring full-state measurements as in residual learning, and a robust control barrier function (CBF) is constructed to enforce safety under uncertainty. However, robust CBFs require a known disturbance-variation bound to guarantee absolute safety, which often leads to conservatism in practice. To address this limitation, we further employ a sliding-window conformal prediction mechanism to estimate the bound online in a distribution-free manner, thereby achieving practical probabilistic safety guarantees. Experiments on a 7-DoF Franka Research 3 manipulator demonstrate millimeter-level tracking accuracy and real-time safe control at 1~kHz under various disturbances.

This paper presents a novel non-linear mathematical model of an articulated tractor-trailer system that can be used, in combination with receding horizon techniques, to improve the performance of path tracking tasks of articulated systems. Due to its dual steering mechanisms, this type of vehicle can be very useful in precision agriculture, particularly for seeding, spraying and harvesting in small fields. The articulated tractor-trailer system model was embedded within a non-linear model predictive controller and the trailer position was monitored. When the kinematic of the trailer was considered, the deviation of trailer's position was reduced substantially alongside not only straight paths but also in headland turns. Using the proposed mathematical model, we were able to control the trailer's position itself rather than the tractor's position. The Robot Operating System (ROS) framework and Gazebo simulator were used to perform realistic simulations examples.

Tactile sensors provide critical information for contact-rich manipulation, yet tactile representations and policies remain tightly coupled to each specific sensor, limiting transferability across robots and hardware platforms. We propose TactX, a framework for learning a transferable tactile representation across sensors spanning three fundamentally different transduction modalities: resistive, magnetic, and vision-based. TactX maps heterogeneous tactile observations into a shared latent space through modality-specific encoders trained on paired contact data. Such paired interactions provide a natural alignment signal across modalities, and the encoders are jointly trained across all sensor pairs, inducing a consistent latent space for all sensor types. Our experiments show that TactX aligns tactile representations across sensors while preserving object-level contact information, as evidenced by sensor-identity prediction and object classification in the learned latent space. We evaluate TactX on four contact-rich manipulation tasks: pick-and-place, plug insertion, board wiping, and object reorientation, and show that policies trained with one sensor transfer zero-shot to physically distinct sensors through the shared latent. This improves the average success rate from 27.5% for vision-only policy to 45.9%, providing a step toward sensor-agnostic tactile manipulation.

This paper proposes a Bayesian filtering-based approach for learning the dynamics of a physical system from partial, noisy measurements. We model the system dynamics using a Lagrangian mechanics formulation. As in Lagrangian neural networks (LNNs), we parameterize the kinetic and potential energies with neural networks. The unknown external forces in the Lagrangian formulation are modeled as white Gaussian noise. The corresponding Euler--Lagrange equations then yield a continuous-time stochastic state-space model (SSM) that describes the system dynamics. The neural network parameters and system states are then jointly learned via a maximum-likelihood method using Gaussian-approximation-based Bayesian filters. The effectiveness of the proposed method is demonstrated on pendulum and Duffing oscillator examples, and its performance is compared with conventional LNNs and with approximate Bayesian filters using known system models.

Sim-to-real policy transfer -- deploying policies trained in simulation in the real world -- is a promising paradigm for scaling robot manipulation without large-scale real-world data. However, transferring simulation-trained policies remains challenging due to discrepancies in contact dynamics -- particularly in contact-rich tasks where subtle differences can alter task outcomes entirely. Because interaction between the manipulated object and the environment is mediated through contact, task success depends on accurately reproducing task-relevant contacts. Accordingly, in manipulation, contact-centric fidelity -- reproducing both the contact event sequence (when, where, and how contacts occur) and the local contact dynamics (how forces and motions evolve at each contact) -- is a necessary condition for task success. Based on this insight, we propose a contact-centric real-to-sim-to-real RL framework that uses task-relevant contact event sequences extracted from real demonstrations as the learning objective. We approximate objects as groups of primitives and optimize their contact geometry in simulation so that the resulting local contact dynamics explain the observed state transitions. The contact event sequence is automatically extracted by replaying the demonstration. This sequence serves as a structured reward signal, guiding the policy toward physically plausible contact regimes validated in reality and preventing exploitation of unrealistic simulator contacts. The signal is obtained automatically, requiring no per-task reward design. Experiments on contact-rich manipulation tasks demonstrate more stable and robust sim-to-real policy transfer compared to unconstrained RL baselines.

Visuo-Tactile policies leveraging optical tactile sensors have shown great promise in contact-rich manipulation. These sensors achieve high spatial resolution and multi-dimensional force sensing by utilizing an internal camera to monitor the deformation of their elastic gel surface, thereby indirectly inferring tactile cues. Despite their advantages, extracting fine-grained contact states necessary for contact-rich manipulation remains an open challenge. Existing methods typically use either raw images or cumulative motion fields to represent tactile cues. However, both are prone to perception ambiguity. Raw tactile images mainly capture appearance changes, while cumulative motion fields only reflect the aggregate gel deformation. Consequently, distinct fine-grained contact states can exhibit highly similar patterns, making it difficult to explicitly distinguish subtle contact variations. To address this issue, we explore the dynamic priors of tactile motion and discover that the correlation between transient and cumulative motion can explicitly distinguish fine-grained contact states. Based on this insight, we propose a motion-aware tactile representation to facilitate contact-rich manipulation. Beyond tactile representation, effective fusion of tactile and visual modalities is also critical. Most existing fusion methods either directly concatenate features from each modality or train modality-specific networks separately and fuse their outputs. However, these strategies struggle to simultaneously model cross-modal interactions and preserve modality-specific characteristics. In this work, we take advantage of the Mixture-of-Transformers architecture and propose a unified modality-aware visuo-tactile policy that captures cross-modal complementarity while maintaining modality-specific properties.

Locating a vehicle and determining its orientation in an uncertain environment is a critical challenge in autonomous vehicle navigation and path planning. To address these challenges, a vehicle estimates its pose while depending on sensor data that offer noisy measurements. These uncertainties in pose quantities are expressed mathematically as a covariance matrix. The real-time computation of the covariance matrix is critical because of the non-linearity involved in the kinematic model. The challenge is thus to evaluate the evolution of the covariance matrix of a vehicle's discretized stochastic kinematics. The purpose of this study is to obtain a near-accurate evolution of the covariance matrix of the rear-wheel bicycle kinematic model under uncertainties in wheel displacement and steering angle. We used Taylor's series to linearize the nonlinear trigonometric functions and provided closed-form expectations of random variables with the required accuracy. Our analytical findings are in good agreement with those obtained from Monte-Carlo simulations. Our contribution is probably the first detailed closed-form presentation of the covariance matrix constituents of the vehicle under evaluation, which were previously reported either incorrectly or incompletely. These findings aid in identifying the potential and constraints of the discretized kinematic model as well as its stochastic analysis. The techniques presented here are useful for the simultaneous localization and odometry self-calibration of certain mobile robots and autonomous vehicles.

Multi-robot manipulation requires jointly reasoning about contact formations, robot motions under coupled dynamics, and collision avoidance. Systematically searching over this large space is difficult and becomes increasingly intractable as the number of robots grows, the task horizon lengthens, or the scene becomes more densely cluttered. Existing approaches therefore either learn to solve the problem end-to-end via reinforcement learning or restrict planning to a simpler surrogate problem, such as planning object motions while learning short-horizon contact primitives. However, neither paradigm scales to the problem instances we target: long-horizon multi-robot manipulation in extremely dense environments. In this paper, we propose Long-horizon Adaptive Manipulation Planning (LAMP), a framework combining a generative model for manipulation with classical planning for long-horizon reasoning. We instantiate our framework with two algorithms leveraging insights from established planning techniques, A* and lazy search: LAMP-A*, which systematically searches over the coupled object-robot space, and LAMP-Lazy, a lazy planner that enables real-time replanning through deferred evaluation. Experiments in challenging simulated environments demonstrate that our approach solves complex long-horizon tasks in highly cluttered environments that prior methods cannot handle.

Continuum robots offer key advantages in navigating unstructured environments, but their safe operation requires accurate estimation of the external contact forces acting anywhere along the robot body. Estimating these forces at unknown locations is an ill-conditioned problem, particularly for multiple contacts. We propose a unified shape and force estimation framework formulated on a factor graph. By incorporating a Gaussian mixture force parameterization into a discretized probabilistic Cosserat rod model, we reduce the dimensionality of the unknown external forces and mitigate the ill-conditioning of node-wise force estimation. The framework fuses strain, tendon tension, and pose measurements to simultaneously estimate the robot's shape and external forces while accounting for modeling and sensor uncertainties. Numerical simulations demonstrate that the proposed method outperforms existing methods in terms of force location and magnitude estimation for both single and multi-contact scenarios. We further present a progressive variant that introduces basis functions on demand to estimate contact forces sequentially during a simulated confined-navigation task.

Vision-Language-Action (VLA) models demonstrate impressive reasoning over visual, semantic, and spatial task variations by leveraging large-scale vision and language pre-training. They remain, however, largely blind to contact forces, which seldom manifest clearly in visual feedback but are central to contact-rich manipulation. Tactile sensing measures these forces directly, but integrating it into VLAs is difficult: tactile data is absent from the large-scale corpora used to pre-train VLAs, so adding it as a new input modality induces a distribution shift that erodes the very pre-training that makes VLAs effective. We propose Tactile Annotation Prompting for Vision-Language-Action models (TAP-VLA), a simple framework that supplies tactile feedback through visual augmentation rather than architectural change. TAP-VLA extracts shear fields from visuo-tactile sensors and overlays them as spatially-grounded vectors onto the multi-view RGB images the policy already consumes, yielding a clear, interpretable tactile cue in the VLA's native observation space. Because the architecture is untouched, the approach requires no tactile pre-training, adds negligible compute, and stays close to the pre-training distribution. Across four contact-rich tasks, TAP-VLA succeeds on 78% of trials, compared to under 50% for vision-only fine-tuning and alternative tactile-fusion baselines -- including tasks where the baselines perform no better than chance.

Rolling motion planning is challenging because rolling contact imposes nonholonomic constraints and the configuration evolves on a curved manifold. The problem becomes substantially harder in multi-contact settings, where multiple bodies roll without slip and the contact states are coupled. This paper presents a new framework for multi-contact path planning in spherical rolling robotics under no-slip constraints. We first derive a compact kinematic model for multi-sphere rolling using Montana's contact-coordinate formulation, where each contact is represented by a stacked five-state vector. Building on this model, we construct a Voronoi-based roadmap directly on the spherical contact manifold, incorporating spherical-cap obstacles and mutual-exclusion regions via on-manifold collision checking, and refine discrete graph paths using manifold-consistent log-exp smoothing. The resulting smoothed surface paths are then lifted to admissible multi-contact rolling motions through the derived Montana kinematics and validated via forward simulation. We further evaluate feasibility and path quality versus trajectory smoothness, Voronoi seed density, and computation time. The proposed framework provides a foundation for extending the method to non-spherical geometries, time-varying obstacle environments, and experimental validation on physical rolling robotic platforms.

Robots deployed in safety-critical environments must execute motions that are simultaneously robust to disturbances and provably safe from collisions. Dynamic Movement Primitives (DMPs) offer inherent stability, temporal flexibility, and efficient trajectory generalization from single demonstrations, but they lack formal safety certificates. Conversely, Hamilton-Jacobi (HJ) Reachability analysis provides a principled framework for computing worst-case safety margins and forward-invariant safe sets, but classical grid-based methods suffer from the curse of dimensionality and are impractical for real-time control. This paper introduces HJ-SafeDMP, a framework that integrates DMPs with learned HJ Reachability-based safety value functions to achieve provably safe, robust, and computationally efficient robot motion. We learn a Control Barrier Value Function (CBVF) from offline demonstration data using a model-free, finite-difference HJ recursion and deploy it as a real-time safety filter via a closed-form control law that modulates the DMP output. Unlike optimization-based CBF-QP approaches, our method achieves safety filtering without online quadratic program solves, preserving the computational efficiency of DMPs. We further incorporate an expectile-based offline learning objective that avoids querying out-of-distribution actions, and a conformal prediction calibration step that provides finite-sample probabilistic safety coverage. Experimental evaluation on a 7-DOF robot manipulator demonstrates that HJ-SafeDMP achieves formal safety guarantees with orders-of-magnitude faster execution than optimization-based baselines, while maintaining the robustness and adaptability of DMPs for human-robot interaction.

At competitive speeds and spins, a table tennis ball follows complex, counterintuitive trajectories that a robot must track and precisely counter within fractions of a second. Training a reinforcement learning policy capable of these skills is prohibitively expensive and dangerous in the real world, making high-fidelity simulation essential. Transferability of such policies, however, critically depends on how faithfully the simulation captures real-world dynamics - a requirement made even more stringent by the adversarial nature of the game, where any modeling inaccuracy becomes an exploitable weakness for the opponent. Prior state-of-the-art in robot table tennis generally focuses on a limited range of velocities and spins and fails to capture the richness of ball behaviors encountered in professional-level play. In this work, we present physics models for aerodynamic ball flight, ball-table contact, and ball-racket contact. that accurately capture the ball behavior over a vast range of speeds and spins relevant to the game. Specifically, we model drag and Magnus force coefficients as functions of Reynolds number and spin ratio in the aerodynamics equations. For the table contact model we model effects of ball buckling on the coefficient of restitution and incorporate residuals into the instantaneous point-contact models. For the racket contact model, we introduce a residual neural network component to complement coefficients related to normal and tangential coefficients of restitution as well as torsional spin damping. Evaluated on an unprecedentedly large dataset of competitive matches (277 games), the proposed models significantly reduces prediction errors (e.g., 59% median landing-position error reduction). The resulting models were used to train the RL policies for the first real-world robot table tennis AI agent capable of competing against professional players.

Neuromorphic and edge computing research has focused on reducing the inference cost of neural network controllers, yet in physical closed-loop systems the actuator can rival or exceed an efficient controller in energy. An efficient controller is therefore necessary but not sufficient, because the actuator becomes the cost worth reducing once inference no longer dominates it. Here, we introduce energy-aware learning, an approach that incorporates actuator energy directly into the reinforcement learning reward, and demonstrate it in closed-loop deep brain stimulation (DBS) for Parkinson's disease. A deep spiking Q-network, trained in a biophysical cortico-basal ganglia-thalamic circuit model, learns to suppress pathological alpha-beta oscillations by 45.2% while reducing stimulation charge by 80.0% relative to continuous DBS. Sparsity-constrained knowledge distillation compresses the policy onto the SynSense XyloAudio 3 neuromorphic processor at 0.52 mW inference power, yielding 28.1x lower energy per inference than an equivalent artificial neural network on conventional edge hardware. By co-optimizing stimulation energy and inference efficiency, the framework addresses both major power demands in implantable neuromodulation.

Athlete assessment is a critical process for tracking physical progress and identifying elite talent. However, during mass recruitment drives, traditional methods rely on manual observation, which is inherently subjective and unscalable, or basic computer vision (CV) systems limited to quantitative repetition counting. These standard approaches lack the "coaching intelligence" required to evaluate qualitative physiological markers such as form degradation, spinal articulation, and fatigue. This paper presents a novel, LLM-based hybrid agentic framework for automated, holistic athlete profiling that strictly aligns with the Sports Authority of India (SAI) assessment protocols. Orchestrated via LangGraph, our dual-pipeline architecture synthesizes the geometric precision of CV (MediaPipe) for kinematic tracking with the semantic reasoning of Vision-Language Models (Llama-4-scout). To overcome the latency and token constraints associated with multimodal video processing, we introduce a 3 X 3 "Smart Grid" temporal chunking strategy, reducing computational overhead by over 88% while preserving critical temporal continuity. To ensure data integrity and mitigate hallucination, the framework pioneers an autonomous "LLM-as-a-Judge" self-correction loop that cross-references quantitative and qualitative metrics before persistence. Finally, we implement a dual-persistence Retrieval-Augmented Generation (RAG) pipeline utilizing a vector search engine (ChromaDB). This enables coaches to bypass rigid SQL databases and perform complex semantic queries (e.g., "Identify athletes with high endurance but poor core rigidity") using natural language. Experimental results demonstrate that this multi-agent approach significantly bridges the gap between raw biometric tracking and actionable coaching insights, offering a scalable, objective solution for national talent identification.

World models can predict future physical states, but prediction accuracy alone does not explain how physical information is organized and used inside their latent dynamics. We introduce a controlled diagnostic protocol for studying event-conditioned latent physical structure in passive object-state world models. The protocol tests whether hidden representations encode event-regime information, whether event contexts reweight non-exclusive physical field readouts, and whether field-aligned representational components have functional consequences for prediction. Using a balanced controlled-generator dataset with free-motion, collision, and occlusion events, we evaluate recurrent, attention-based, and latent state-space transition models under a fixed-horizon forecasting setup. The models learn useful predictive dynamics and their hidden states support reliable event-regime readout. Event contexts systematically reweight kinematic, contact, and object-permanence field readouts: free motion is kinematic-dominant, collision combines kinematic and contact structure, and occlusion combines motion-related and object-permanence structure. Time-aligned and directional-consistency analyses further show phase-related shifts in field emphasis. Finally, fixed-horizon projection causal field effect (CFE) shows that suppressing field-aligned directions can degrade event-relevant prediction, with strongest evidence for contact-aligned structure in collision-contact windows and more qualified evidence for object-permanence-aligned structure in hard-occlusion hidden windows. These results support event-conditioned organization and fixed-horizon functional sensitivity of latent physical fields, while not implying explicit physical modules, isolated causal circuits, or context-invariant sliding-window generalization.

Long-horizon robotic manipulation is highly sensitive to physically infeasible transitions, contact-induced disturbances, and the lack of effective self-correction during execution. Although Vision-Language-Action (VLA) models provide strong task grounding through multimodal learning, they typically generate actions in a feed-forward manner without explicitly checking physical feasibility or diagnosing execution errors online. We present PhysReflect-VLA, a plug-and-play execution-time reliability framework that augments VLA policies with physical feasibility evaluation and structured self-reflection in a closed-loop control pipeline. A Feasibility Operator evaluates whether candidate actions induce dynamically consistent state transitions; an Action Explanation Operator verifies transition coherence; and an LLM-based Reflection Module analyzes state discrepancies to generate corrective guidance for subsequent actions. A two-stage training procedure stabilizes feasibility modeling and integrates reflection into the control loop. Experiments on multi-stage, contact-rich real-world manipulation tasks show consistent improvements in stage-wise stability and overall task success compared with representative VLA baselines with an average gain of 5.4%. Ablation results further indicate that feasibility checking and reflection-based correction both contribute to improved execution robustness. These results highlight the importance of embedding physical consistency checks and online self-reflection for reliable long-horizon robotic manipulation.

Bridging abstract semantics and precise physical control remains a fundamental challenge in open-world robotic manipulation. While recent data-driven policies show promise, their reliance on isolated contact points or latent affordance embeddings lacks the rigorous kinematic constraints necessary for complex articulated objects.To overcome the limitation, we introduce RelAfford6D, a novel training-free framework centered on a Relational 6D Affordance Graph. Given a free-form instruction, our system deduces a semantic topology linking a primary interacting part to its physical anchor. By elevating these topological nodes into precise metric $SE(3)$ poses via vision foundation models, we analytically formulate downstream execution as a kinematic constraint satisfaction problem. The robot synthesizes continuous trajectories by tracking strictly defined physical manifolds (e.g., revolute or prismatic orbits). Coupled with a closed-loop tracking mechanism for dynamic replanning against disturbances, our physically grounded approach achieves superior zero-shot success rates, cross-category generalization and execution robustness in both simulation and the real world environments, outperforming existing data-driven baselines.

Humanoid motion imitation requires not only accurate perception of human kinematics but also faithful reproduction of physical interactions with the environment. However, existing pipelines rely primarily on vision-based motion capture and kinematic imitation, largely ignoring contact dynamics, leading to artifacts such as foot sliding, floor penetration, and unstable behaviors. In this work, we revisit humanoid motion imitation from the perspective of physical grounding and leverage pressure as a unified modality across perception and control. We present PressMimic, a framework that integrates pressure into the full pipeline from motion capture to humanoid control. In the perception stage, we introduce FRAPPE++, a multimodal model that fuses RGB and pressure to jointly estimate 3D pose and global motion, where pressure provides explicit contact and support constraints to resolve ambiguity in vision-based estimation. In the control stage, we propose a pressure-supervised policy (PSP) that incorporates pressure-derived signals into reinforcement learning, enabling physically consistent contact patterns during execution. We further construct MotionPRO, a large-scale dataset with synchronized RGB, pressure, and motion capture data. Experiments show that pressure improves motion estimation accuracy, trajectory consistency, and execution stability. These results demonstrate that pressure serves as an effective physical grounding signal, bridging perception and control for physically consistent humanoid motion imitation.

Motion feasibility prediction plays a central role in robotics, particularly in task and motion planning and manipulation. A major bottleneck for this problem in cluttered environments is that infeasible planning attempts by Sampling-based motion planners (SBMPs) can incur substantial computational cost. Also existing approaches for infeasibility certification are limited to low-dimensional configuration spaces and often assume simplified geometric environments represented by primitive objects with known parameters. We study the complementary problem of learning motion feasibility prediction directly from raw RGB-D observations for a 7-DOF manipulator operating in realistic cluttered scenes. We introduce the first large-scale benchmark for this setting, comprising 2.7M grasp feasibility labels over 88 scanned objects and 190 cluttered tabletop scenes. We benchmark three representative classifier families spanning MLP- based, volumetric-CNN, and point-cloud-based Transformer architectures under matched training conditions. Our best model, GRASPFC-PTX (a point-cloud transformer), achieves an AUROC of 0.996 on Novel objects while providing predictions significantly faster than SBMPs.

Robotic manipulators operating in unstructured environments face significant challenges in safely executing goal-directed tasks due to dynamic and unforeseen obstacles, while traditional methods rely on prior knowledge or fixed perception pipelines, limiting adaptability. We propose a framework for safe task execution with effective obstacle avoidance. The environment module performs real-time obstacle detection, 3D localization, and ground surface geometry estimation. It then generates a structured semantic report that includes obstacle positions, object geometry and shape, and whether obstacles lie inside, outside, or within critical interaction zones. A central coordination module manages the overall system by handling tool invocation (e.g., memory and MoveIt collision scene updates), facilitating communication between modules, and continuously monitoring task progress until completion. Furthermore, a planning module selects an appropriate motion planning algorithm, such as RRTConnect, RRT*, or BiTRRT, based on the current environment configuration and goal requirements. The trajectory generated by the planner is further analyzed and refined to ensure safe and collision-free task execution. The proposed approach is evaluated in Gazebo Classic , demonstrating robustness in dynamic scenarios.

Handheld data collection systems, such as the Universal Manipulation Interface (UMI), enable scalable data collection across diverse environments but only capture observed actions rather than the desired actions executed by a robot controller. In contrast, teleoperation captures desired actions directly, but requires a robot in-the-loop. We revisit this trade-off through the lens of action validity across task phases. We observe that handheld trajectories provide valid supervision in tolerant, free-space phases, but can be poor supervision targets for contact-sensitive phases, requiring high stiffness to minimize tracking errors, resulting in large contact forces. We study the interaction between these two supervision types for contact-rich manipulation and find that training policies that combine handheld data with a small number of targeted teleoperated demonstrations provide an effective hybrid strategy. Specifically, rather than teleoperating the entire task, we only collect partial teleoperated demonstrations for task segments where base handheld policies fail. However, naively mixing handheld and teleoperated phase-specific data yields worse performance than training on handheld data alone. To address this mismatch between observed and desired supervision, we propose Bi-modal Routing for Imitation Data via Gated Experts (BRIDGE), a mixture of diffusion policy experts that routes between specialist task phase heads conditioned on the current robot state. Notably, our approach enables task-phase specific use of desired actions during contact sensitive segments and improves success rates over handheld-only baselines by up to 36.7% across three contact-rich manipulation tasks.

Long-horizon, contact-rich complex manipulation tasks, such as seating a GPU into a PCIe slot, demand both millimeter high precision and out-of-the-box generalization to new tasks. Existing paradigms struggle to satisfy both: classical pipelines use brittle, task-specific interfaces to achieve high-precision control but require costly pipeline redesigns to adapt to new tasks, whereas monolithic end-to-end policies provide better generalization but lack high precision on complex, out-of-distribution tasks unless retrained with new data. Both paradigms share an implicit assumption: once a manipulation capability is acquired, it must be deployed as a rigid pipeline or monolithic whole, rather than being freely decomposed and recomposed. In this paper, we show that complex manipulation capabilities can emerge naturally from the composition of simple, independent behaviors. Rather than deploying a monolithic policy or a rigid pipeline, we propose CoStream, a framework orchestrating foundation models and diverse sensing modalities into multiple composable core behaviors: a semantic behavior extracting spatial constraints via foundation models; a predictive behavior forecasting trajectories by tracking keypoints in imagined videos; and a reactive behavior providing high-frequency tactile and force corrections. On a shared $SE(3)$ interface, these outputs compose by right-multiplication into a single pose command at each control step, executed by a compliant controller. We demonstrate CoStream on 8 real-world tasks spanning everyday manipulation and precision assembly, with the strongest gains in contact-rich assembly and object transfer, and show robust recovery from manual perturbations during execution. Website: https://costream-simple.github.io

Recent studies suggest that diffusion models can recover geometric structure in the data manifolds they are trained on, yet the supporting evidence has so far come mostly from natural-image data, where the underlying geometry itself is unknown. We study this question in a setting where the geometry is analytically tractable: constrained inverse kinematics (IK). Each task-space constraint defines a configuration-space manifold with known intrinsic dimension, giving direct ground truth for evaluating the geometry learned by the model. For each of the 6-DoF UR5 and 7-DoF Franka, we train a single conditional diffusion model across seven constraint families, spanning solution manifolds from discrete IK branches to self-motion manifolds. Our empirical results reveal that the intrinsic dimension recovered from the model's score function matches the analytical degrees of freedom of the corresponding constraint manifold across both robots. Moreover, linear interpolation in the latent space leads to generated solutions that remain close to the appropriate constraint manifold, indicating that the learned representation further captures geometric structure of the constraint family beyond intrinsic dimension alone. Constrained IK therefore offers a controlled setting for studying the intrinsic geometry learned by diffusion models.

Human demonstrations are a scalable data source for learning robot manipulation policies. However, common sources of human demonstration data, such as motion-capture trajectories and internet videos, capture mostly motion and appearance while missing the contact forces that are critical for force-sensitive manipulation. In this paper, we introduce ForceBand, a low-cost wrist-worn sEMG system that turns human muscle activity into force-enriched demonstrations. We first collect a 10-hour multimodal dataset containing egocentric video, sEMG, IMU, and fingertip force measurements across diverse actions and objects. Using this dataset, we pre-train an EMG2Force model that predicts per-finger forces from sEMG and IMU signals. After a short user-specific calibration, users can collect target-task demonstrations using only ForceBand and video; EMG2Force then labels these demonstrations with per-finger force traces, producing force-augmented demonstrations for robot policy learning. Experiments show that ForceBand recovers fine-grained fingertip interactions with over 50% lower force prediction error than vision-based baselines and achieves an 87% success rate on pick, squeeze, and place tasks that require object-specific force control across objects with diverse shapes, sizes, and weights. Project website: https://forceband-emg.github.io

Learning long-horizon humanoid loco-manipulation poses a dual challenge: it requires not only the robust execution of meta-skills but also their seamless, closed-loop chaining equipped with autonomous recovery. Existing approaches remain limited: explicit humanoid-object interaction representations offer precision but are notoriously difficult for high-level planning, whereas implicit skill embeddings are compact but lack the interpretability required for reliable composition. We propose \ours, a hierarchical framework centered on \textbf{contact flow (CF)}, a compact representation consisting of key body trajectories and time-series binary contact signals. Leveraging this shared interface, our low-level policy \textbf{CF-Track} learns a unified library of loco-manipulation skills, while our high-level module \textbf{CF-Gen} heuristically synthesizes future contact-flow sequences. To support this setting, we additionally collect the OmniContact dataset, a MoCap-based HOI corpus for humanoid loco-manipulation (Appendix~\ref{sec:dataset}). Together, they enable robust execution, autonomous failure recovery, and flexible composition of meta-skills for long-horizon tasks. Experiments show that OmniContact achieves $98.7\%$ success on \textit{Carry Box} and $76.5\%$ on \textit{Push-Stack Boxes}, outperforming prior baselines by average margins of $40.9\%$ in meta-skill and $66.5\%$ in skill chaining. Besides, our framework naturally integrates with VLMs for semantic task decomposition, enabling complex, semantically grounded loco-manipulation behaviors, such as arranging scattered boxes into a heart shape.

This paper investigates whether magnetic plantar sensing can be embedded directly inside the load-bearing compliant element of a low-cost semi-active prosthetic foot. We present a prototype integrating a sensorised 3D-printed lattice footplate, a servo-adjustable hydraulic damper, and a reduced-order ankle model. The damper is experimentally characterised to relate adjustment angle to damping coefficient. Controlled compression tests show tunable lattice stiffness, while cyclic normal loading shows that the embedded sensor tracks the testing-machine reference force, supporting plantar-force estimation without an external insole layer. Static-posture trials under approximately body-weight loading show that forefoot and rearfoot loading distributions are separable across four prescribed stance configurations, providing a preliminary check of the sensing pipeline. A feedforward damping schedule approximates the dorsiflexion trend of a reference ankle trajectory through early-to-mid stance, while exposing the expected limitation that a purely dissipative mechanism cannot generate active push-off. Together, these results demonstrate that sensing can be embedded inside the load-bearing compliant element of a prosthetic foot and used to drive semi-active damping.

Accurate physical parameter identification of manipulated objects is fundamental to advanced robotic manipulation and the construction of faithful digital twins. However, acquiring physically consistent inertial and frictional properties from real-world interactions remains challenging due to sensing noise, modeling errors, and limited prior knowledge. This paper presents RigPI, a systematic framework for identifying dynamic parameters of both unconstrained rigid bodies and multi-link rigid bodies during robot-object interaction. RigPI integrates vision-based semantic priors, force-torque measurements, and motion observations within a differentiable simulation pipeline. A vision-language model (VLM) provides informed initialization and a constrained search space, while gradient information from a differentiable physics simulator enables efficient and stable parameter refinement. The proposed two-stage optimization strategy alleviates sensitivity to noise and avoids physically implausible solutions. Extensive real-world experiments on objects with revolute and prismatic joints demonstrate that RigPI achieves accurate and stable parameter estimates, and successfully reproduces manipulation trajectories on a real robot with parameter-aware predictive validity. These results highlight the effectiveness and robustness of RigPI for real-world robotic system identification tasks.

Accurate extended pose estimation (orientation, velocity, and position) for IMU-instrumented articulated rigid-body systems is a key challenge in robotics and human motion analysis. The invariant extended Kalman filter (IEKF) addresses this problem for a single rigid body with convergence guarantees and consistency under unobservability, but extending these properties to articulated systems is nontrivial: inter-body pose coupling prevents a direct application, and incorporating joint kinematic constraints within the invariant framework remains an open problem. To address this gap, we introduce the relative L-extended pose, a Lie group representation for kinematic-tree systems. With one IMU per body, it yields group-affine dynamics and allows joint constraints to be expressed in invariant form. We incorporate these constraints as noise-free pseudo-measurements within an iterated IEKF (IterIEKF), thereby preserving the convergence and consistency guarantees of invariant filtering. Validated on both a UR5e robot and a human leg, the proposed IterIEKF outperforms all EKF, IterEKF, and absolute-pose IterIEKF baselines. It converges faster, exhibits lower run-to-run variability, and consistently achieves the lowest RMSE, with reductions of at least 50% compared to the second-best filter across all scenarios considered in this work.

Legged manipulators combine the mobility of legged platforms with the manipulation capability of robotic arms. However, arm-induced Center-of-Mass shifts and dynamic disturbances make the system more prone to instability under actuator failures, potentially leading to falls, task failures, or safety risks. Existing fault-tolerant control methods mainly focus on locomotion alone, leaving the coupled problem of whole-body stability and arm reachability in fault-tolerant loco-manipulation largely unaddressed. To bridge this gap, we propose FT-WBC, a fault-tolerant loco-manipulation framework for robust whole-body control of legged manipulators under actuator failures. FT-WBC adopts a decoupled upper- and lower-body policy architecture and introduces two key modules: a Fault Estimator (FE) and a Posture Adaptation Module (PAM). The FE predicts faulty joints from lower-body proprioceptive histories, while the PAM uses this fault information to adapt the base posture plan generated by the arm policy, converting potentially unstable posture requests into safe and executable base posture commands. Through this fault-aware posture adaptation mechanism, FT-WBC synthesizes compensatory gaits under actuator failures and preserves as much arm workspace as possible while maintaining whole-body stability. Simulation and real-world experiments show that FT-WBC significantly improves survival rate and workspace under weakening or locked failures, and transfers zero-shot to a real legged manipulator in the real world.

Reinforcement learning can train bimanual dexterous hands to play piano in physics simulation with high note accuracy, but for high-DoF dexterous hands, relying solely on task rewards or IK inversion often leads to unnatural postures and joint overextension. We propose \textit{Adversarial Posture Regularization (APR)}. It avoids expensive, song-aligned expert demonstration data and instead uses a small amount of casual human playing data. By matching the distribution of the posture of the policy with the human prior through an adversarial objective, APR encourages more human-like hand shapes. Meanwhile, we collect and release unstructured hand motion data of piano playing using a consumer-grade Meta Quest 3, and retarget the key motion information to the Shadow Hand. Finally, we achieve significantly better performance than prior methods on all three human-likeness metrics (cPSI, BSE, and FAC) as well as in visual quality. Project repository: https://github.com/APRProject/APRPianist.