Hand

Sign language processing advances rapidly for high-resource languages such as American Sign Language (ASL), yet most of the world's sign languages lack the phonological annotations new methods require. We present the first zero-shot cross-lingual framework for handshape recognition, transferring from ASL to Catalan Sign Language (LSC). Our approach leverages the decomposition of handshapes into five phonological features -- selected fingers, flexion, spread, thumb position, and thumb contact -- shared across both languages, to decode LSC handshapes from predicted features via a composite phonological distance metric. We evaluate three architectures (MLP, SL-GCN, SHuBERT) trained on two ASL corpora (PopSign, Sem-Lex) against a 37-handshape, single-signer LSC benchmark. Zero-shot transfer proves viable once recording-format disparities are harmonized, reaching 80.0% phonological feature accuracy and 54.5% expected handshape accuracy. Phonological decomposition thus offers a bridge for extending sign language technologies to low-resource languages without any target-language video training labels.

Whole-body humanoid teleoperation commonly combines a motion-tracking policy with a separate dexterous-hand retargeter. However, independently generated commands do not explicitly preserve body-hand geometric relations, leading to mismatches in relative wrist poses and fingertip positions during bimanual interaction. We present a gated residual coordination framework that keeps both modules frozen and applies bounded corrections to their outputs. A motion-conditioned action gate allocates correction authority across joint groups, while reference-geometry-dependent reward gates emphasize relevant interaction objectives during training. To establish the nominal body controller on Agile One, we introduce multi-pose morphology calibration that jointly estimates triaxial scales and effector-local offsets, together with staged motion dataset curation for training a SONIC-based tracker. The residual policy uses human motion references, initial commands, and robot proprioception without explicit object or contact observations. In simulation, it reduces wrist and fingertip geometry errors by 39.2-56.3% over direct composition on held-out GRAB motions, while preserving whole-body tracking on AMASS, with success rates of 89.03% without residual coordination and 89.29% with it. Ablations characterize the contributions of reward gating, adaptive correction authority, and separate body and hand correction heads.

3D hand mesh reconstruction is a challenging yet essential task for downstream applications, including human-robot interaction and AR/VR. Although conventional cameras have been widely adopted for this task, methods that rely on them struggle in low-light environments and under severe motion blur. To address these limitations, event-based cameras have recently attracted attention for their high dynamic range and high temporal resolution. However, applying event cameras to egocentric hand reconstruction remains challenging because camera wearer's motion produces dense background events that obscure hand-specific signals. Although the first egocentric event-based approach mitigates this issue using hand segmentation, its binary hand mask does not distinguish between left and right hands. As a result, the model lacks instance-level hand information and predicts both hands even when only one or neither hand is present. This limitation leads to incorrect inter-hand relationships and degraded reconstruction accuracy. In this paper, we propose EventEgoHands++, a framework for event-based 3D hand mesh reconstruction from an egocentric viewpoint. The proposed method incorporates a Hand Detector that estimates instance-level bounding boxes and masks for both the left and right hands. Moreover, we introduce Adaptive Attention, which dynamically gates the attention based on these detection results to accurately learn the spatial relationship and mutual interactions between the hands. To train and evaluate our framework, we extend the synthetic N-HOT3D dataset and newly construct EEH-R, the largest real-world event-based egocentric hand dataset to date, comprising approximately 1M annotated frames captured in environments including low-light conditions. Extensive experiments on both synthetic and real datasets demonstrate that our method consistently outperforms the baselines.

Capturing hand motion and interaction forces is critical for interactive computing, VR, and high-fidelity tactile demonstrations for robot learning. We introduce a wrist-worn pressure-sensing wristband that recovers continuous full-hand pose and distributed contact force on a single wearable. The system consists of flexible capacitive sensor arrays around the wrist, which require no electrical skin contact, and a recurrent network that maps the resulting pressure signal to hand state. Our key insight is that muscle contraction and tendon displacement produce pressure patterns, which correlate strongly with hand pose and interaction force. To validate this, we collect synchronized recordings of wrist pressure, optical motion-capture hand pose, and tactile-glove interaction force, covering isolated finger motion, fingertip-force stress tests, and natural hand-object manipulation. On isolated single-user motion the wristband attains $4.6^\circ$ mean finger-joint MAE, and across four users manipulating everyday objects it estimates per-finger contact force at $R^2=0.57$, which an external pose signal brings up to $0.75$. We see the wristband as one node in a constellation of everyday wearables -- e.g. paired with an egocentric camera -- adding the contact force that vision cannot observe and taking over when the hand is occluded.

A hallmark of human dexterity is the cooperative use of fingers, where different fingers take on distinct yet coordinated roles to accomplish fine manipu- lation, such as capping a pen with the hand that holds it. We study this finger-level coordination through in-hand assembly: mating two rigid objects within a single dexterous hand, with no second arm and no fixture. We present a reinforcement learning formulation to solve this problem in a unified framework, which is driven by a goal relative pose between the two parts. Finger coordination is shaped by a function-based auxiliary reward and regularized toward a single human reference pose, while domain randomization and a fusion of historical proprioception and object observation confer robustness to occlusion-induced estimation noise. The same recipe solves three different assembly tasks (Bottle, Syringe, and Marker). Trained purely in simulation, the policies transfer zero-shot to hardware with a single camera, demonstrating robustness to state-estimation errors caused by oc- clusion. Our experiments also reveal that in-hand assembly places demands on hand morphology and can serve as a benchmark for modern robotic hand systems. Videos and code are available at https://ltbgbird.github.io/in-hand-assembly-page/.

Under ubiquitous teleoperation environments with optically challenging conditions, an interface for tele-operated grasping that combines wearability with precise decoding of hand intentions (hand pose, gestures, and grasping force) is essential. Yet, existing interfaces often fall short in meeting these demands, compromising either the diversity of multiple intentions decoding or wearability. To address this, we developed a novel Multiple Intentions Decoding Human-Machine Interface (MI-DHMI) that integrates high-throughput surface electromyography (sEMG) sensors with hand-mounted and forearm-mounted inertial measurement units (IMUs). The developed interface is supported by a unified framework for simultaneous multiple intentions decoding. By employing multimodal deep learning and hardware design with a low noise floor, the decoding framework selectively focuses on the sEMG components that are genuinely associated with finger movements. This effectively reduces decoding errors caused by sEMG variability during unconstrained upper-limb motions, thereby significantly enhancing robustness. Even under unconstrained wrist and forearm motion, the interface achieves a gesture recognition accuracy exceeding 97%, grasping force estimation with $R^2 = 0.95$, and hand pose decoding consistent with the actual hand pose, outperforming baseline devices and algorithms. Ablation studies further validate the effectiveness of the proposed decoding framework. Finally, two online experiments were conducted to validate the device, demonstrating its superior performance in high-stability tasks, including a pouring task and object grasping. The developed interface provides a new solution of a fully wearable, multiple intentions decoding system, offering effective support for ubiquitous teleoperation and contributing to the advancement of human-machine interaction research.

Egocentric video offers scalable manipulation data for embodied AI, yet recovering metric 3D hand trajectories remains challenging due to severe object occlusion and frequent out-of-sight gaps. Existing single-frame and windowed temporal regressors fail when a hand shortly leaves the frame, while recent video diffusion models (VDMs) rely on heavy, stochastic multi-step sampling as pixel-space renderers. We instead repurpose VDM into a deterministic geometry encoder. A single forward pass over the clean latent exposes scene content beyond current observations, including occluded and out-of-sight hands. We introduce ACE-Ego-Hand, an offline clip-level framework that extracts features via a Deterministic Clean-Latent Encoder and decodes them with a Bidirectional Spatiotemporal Decoder. ACE-Ego-Hand recovers continuous bimanual trajectories with metric placement and no external detector, while a Ray-Based Camera Solver supports a second configuration that requires no test-time camera intrinsics. Across five egocentric benchmarks, ACE-Ego-Hand sets a new state of the art, cutting MPJPE-p by 30% on occlusion-heavy ARCTIC and 40% on HOT3D. These gains reach 46%-61% once out-of-sight hands are included in the evaluation, offering a scalable path from everyday human video to robot manipulation data.

Convolutional Neural Networks (CNNs) capture local features efficiently but struggle with global context due to their limited receptive field. On the other hand, transformers effectively capture global dependencies through self-attention but suffer from high redundancy and computational costs. Thus, to leverage the advantages of both CNNs and transformers, we propose a unified model (UniCon-Former) that aims to provide robust and efficient performance on dynamic hand gesture recognition. The unified approach helps the model to learn both local and global features. At the beginning of each transformer stage, the convolution projections help in decreasing the dimension of the input vectors of the transformer block. This creates a pyramidal structure at each transformer stage. These features enable the UniCon-Former to reduce resource usage than vanilla transformers, making it flexible for learning multi-scale and high-resolution features, which is required in hand gesture recognition. We have performed experiments with NVGesture and Briareo datasets and achieved state-of-the-art results with fewer parameters and MACs.

Robotic manipulation with dexterous hands is a cornerstone of Embodied AI, yet its progress is stifled by the high cost of collecting embodiment-aware teleoperation data. While abundant egocentric videos of human hands offer a scalable alternative, the profound discrepancies in appearance, articulation, and camera viewpoints between human and robotic data raise significant challenges for co-training. Though existing general image-editing models demonstrate strong capabilities, they lack necessary embodiment-specific priors to fully bridge this gap. In this work, we present HandEdit, a unified large-scale embodiment-aware image-editing dataset and benchmark specifically designed to transform human hands and arms into various dexterous robotic embodiments within egocentric frames. HandEdit comprises over 200M editing instances derived from five diverse source datasets, covering 26 distinct URDFs, including 13 hand-only and 13 hand-arm configurations. Alongside the dataset, we establish a unified benchmark protocol with two tracks: Hand-only and Hand-Arm, supporting URDF-conditioned evaluation. We conduct extensive evaluations of 11 representative image-editing baselines using a multi-dimensional metric suite, including generic similarity metrics, VLM-based judgment, and embodiment-aware metrics. HandEdit serves as a critical resource at the intersection of image editing and robotics: it advances embodiment-aware editing models while enabling scalable dexterous robotic learning from abundant human video data, paving the way for more generalizable Embodied AI.

Hand Pose Estimation (HPE) is a fundamental technology for various applications such as AR/VR and robotics. In these applications, the visibility of each hand joint in the image is crucial for assessing the reliability of estimation results under occlusion. However, most existing HPE methods output joint positions without explicitly indicating their visibility. Although some methods account for occlusion or visibility, visibility estimation has mainly been used as an auxiliary signal for improving pose estimation. To our knowledge, per-joint hand visibility estimation has not been systematically studied as a standalone task. In this work, we propose Hand Visibility Detector, a model for estimating the visibility of individual hand joints, and present the first systematic investigation of visibility estimation as an independent task. We show that leveraging the prior knowledge of HPE models pretrained on large-scale data as a backbone yields high performance in this task. We further demonstrate the utility of Hand Visibility Detector on a downstream task of 3D hand pose annotation via multi-view triangulation of 2D keypoints, showing that visibility-weighted triangulation reduces reprojection error. Our method is released as a ready-to-use package, and the code and demo are available at https://github.com/ryhara/hand_visibility_detector .

We present DIY e-HandPan, a new open-source, low-cost and customizable handpan audio and MIDI protocol interface designed for musical performance, education and research. The proposed hardware is built from inexpensive electronic components and recycled materials using widely available fabrication techniques, making it accessible to makers, educators and researchers. The instrument can be implemented on two distinct MicroController Unit (MCU): Arduino or ESP32. The microcontroller captures strike velocity to provide expressive musical performance comparable to that of an acoustic handpan. In addition to real-time audio and MIDI generation, DIY e-HandPan integrates a bi-color LED guidance system capable of displaying musical sequences from MIDI files, providing an effective learning aid for beginners and educational activities. The modular architecture allows users to easily customize the number of notes, hardware configuration and embedded software according to specific applications. We present the complete hardware design, firmware and assembly instructions and we discuss the design choices and limitations, to evaluate the system in representative educational and musical performance scenarios. All design files, source code and documentation are released under an open-source license to improve the reproducibility and encourage further developments by the open hardware community.

Methods for text-based generation of hand-object interaction (HOI) sequences primarily focus on producing smooth, physically plausible trajectories. A truly utilitarian method should additionally support variable-length generation, composite motion sequences, motion completion and infilling, and reliable termination without compromising physical plausibility. Standard diffusion models for HOI generation are typically trained only for text-to-motion generation on atomic motions and require the motion length to be specified a-priori. Autoregressive (AR) methods provide greater sequence-level flexibility, but commonly depend on discrete motion codes, which can lose contact-sensitive motion detail. To address these key limitations, we present a model performing Masked Autoregression with Diffusion for HOI generation (MAD-HOI). Our method starts by encoding hand and object motions in a continuous latent space while keeping them disentangled to maintain stream-wise control. This is followed by a masked autoregressive transformer to predict context features that condition a flow-matching head. MAD-HOI is capable of motion generation for atomic and composite articulated sequences, conditioned motion completion and infilling, as well as EOM (End of Motion) prediction from a single training objective. We provide comprehensive evaluations for these capabilities and benchmark our method on the ARCTIC and GRAB datasets. Our experiments demonstrate that our method generates more diverse and physically plausible interactions compared to other open-sourced baseline methods.

Hand positional guidance with intuitive perception is crucial for enhancing user interaction and task performance in immersive environments. However, conventional hand positional guidance methods, relying on tactile sensations, lack intuitiveness. Consequently, users require instruction on the relationship between the tactile sensation and target position of the guidance before using these methods. Additionally, the user needs training to become familiar with tactile sensations. This study presents a hand positional guidance system with intuitive perception that leverages McKibben-based surface tactile sensations directed to the shoulder and elbow. We developed a wearable fabric actuator that provides McKibben-based surface tactile sensations to induce six specific movements: elbow flexion, extension, shoulder abduction, adduction, horizontal abduction, and horizontal adduction. The effectiveness of the actuator was experimentally validated, demonstrating its high accuracy in intuitively inducing six movements. An algorithm based on the equilibrium point hypothesis and Weber-Fechner law was implemented to regulate the intensity of the tactile sensations for hand positional guidance. Furthermore, the accuracy and speed of the proposed system were compared with that of conventional guidance methods utilizing synthesized speech and vibrotactile guidance.

Humans achieve stable and adaptive grasps by seamlessly integrating visual perception and tactile feedback, a capability that remains challenging to replicate in robotic systems. Existing robotic grasping approaches predominantly rely on visual inputs and lack mechanisms for tactile-guided adaptation after contact, limiting robustness and generalization. To address this challenge, we propose a unified visuo-tactile-fusion grasping framework that integrates grasp generation, feasibility prediction, and adaptive refinement. At its core, our method introduces an efficient visuo-tactile representation that tightly fuses object geometry with tactile feedback by associating tactile signals with finger identities. This unified representation supports contact-aware grasp pose generation during planning and tactile-guided refinement after contact, enabling the system to reason about fine-grained finger-object interactions and adjust grasps dynamically. Comprehensive experiments in both simulation and real-world environments demonstrate that our approach significantly enhances grasp success rates and generalization across diverse objects.

Modern LLM coding agents such as Claude Code and OpenHands share a common inefficiency: they spend much of their token budget finding the file to patch, rather than patching it. On SWE-Bench Verified, a 30B OpenHands agent averages 23 rounds and 631K tokens per resolved issue, with many calls spent on grep, glob, and view_file during repository exploration. We introduce CodeGrep, a 14B retrieval agent trained end-to-end with GRPO to issue multi-turn parallel grep, glob, and read tool calls and return candidate files to a frozen downstream coding agent. On all 500 SWE-Bench Verified instances, CodeGrep preserves resolve rate while substantially improving efficiency: 27.0% versus 25.8% for the no-retrieval baseline, with 15% fewer rounds and 19% fewer tokens on resolved instances. Across retrievers, downstream utility follows a precision threshold: BM25 with precision 0.375 degrades the agent, Jina with precision 0.445 is neutral, and CodeGrep with precision 0.677 crosses the threshold at which retrieval begins to reduce rollout cost. To enable this study, we mine supervision from 67K open-source agent trajectories using CATM and build a Git-worktree environment for multi-turn agent RL. In our setting, applying the efficiency signal at the advantage layer rather than the reward layer reduces KL drift and translates cleanly into downstream efficiency. We will release the model, training pipeline, RL environment, and evaluation harnesses.

Hand motion carries the finest-grained information in human activity, yet the representations behind hand generation, understanding, and robot learning are overwhelmingly continuous--joint angles or MANO parameters. These are accurate but unstructured: a finger cannot be indexed or edited as a symbol, and nothing marks a pose as anatomically valid. Discrete symbolic representations supply exactly this structure, and Hand Labanotation (HL) has shown they are feasible for the hand, writing motion as a T x 40 grid of one fixed direction symbol per bone. Building on this grid, we ask the question underneath it: the anatomical unit a symbol should span--bone, finger, or whole hand. DigitCode answers it by adapting, grouping, and layering HL's alphabet along the hand's unit hierarchy within one code, cutting the symbolic representation's quantization error by three quarters. The lever is the unit, not the quantizer family: at a fixed unit, training-free and learned strong quantizers are interchangeable on reconstruction, while moving down the anatomical hierarchy is what shifts accuracy. The hierarchy also tracks what downstream tasks need. Because a finger is a genuine, enumerable unit, one per-finger token doubles as a training-free, editable handle for jobs a continuous representation cannot address--repairing malformed generated hands, and retargeting them onto robots. We release HandTok, a reproducible testbed, so hand tokenizers can be compared unit-for-unit. Project page: https://digitcode-demo.github.io.

Single-image 3D hand avatar reconstruction is fundamentally ill-posed and particularly challenging due to limited visual evidence under severe self-occlusion and the complex pose-dependent deformation of highly articulated hands. Existing methods predominantly rely on implicit NeRF-style representations, whose volumetric fitting is computationally expensive and often struggles to preserve fine-grained hand details. In this work, we present OASIS, a tailored 3D Gaussian Splatting framework for single-image hand avatar reconstruction. To faithfully encode sparse image-specific appearance cues in single-view reconstruction, we construct geometry-aligned visual evidence tokens by explicitly aligning input image observations with 3D hand geometry and context-adaptively tokenizing the resulting visual evidence. Since severe self-occlusion makes the reliability of image evidence inherently visibility-dependent, we introduce a visibility-conditioned point-image attention to reliably transfer visual evidence to geometric tokens, yielding occlusion-aware Gaussian features for faithful and robust reconstruction. To further capture non-rigid deformation of articulated hands, we introduce a Feature-on-Mesh representation to enable Gaussian deformation to be guided by local surface stretching. Under this framework, we adopt a one-shot adaptation scheme that learns a shared hand prior from multi-identity training data and then fits it to a target image for target-specific reconstruction. Extensive experiments show that OASIS outperforms existing baselines in both visual fidelity and efficiency across challenging poses and in-the-wild scenarios, and further demonstrates strong versatility in downstream applications such as text-to-avatar generation and texture editing.

Gait recognition is shaped by its input representation. Silhouettes encode projected body shape, skeletons encode sparse joint coordinates, and 3D meshes encode dense surface geometry. In each case, identity-bearing articulation is observed through geometric carriers that also vary with clothing, skeletal scale, or body shape. We investigate whether gait can instead be recognized from compact articulated controls. We introduce Momentum Human Rig (MHR) pose as a gait representation, describing each frame using 184 semantically organized body and hand parameters estimated from monocular video. MHRGait groups these heterogeneous controls by anatomy, models their intra-frame coordination and temporal evolution, and produces compact body and hand descriptors. We further introduce MHRGait++, which combines MHR pose with silhouettes through modality-balanced distance fusion, preventing descriptor count from determining modality importance. Experiments on four benchmarks show that MHRGait attains the best overall performance among compared model-based methods on CCPG and SUSTech1K and transfers effectively across datasets, while its recognition network requires only 2.76M parameters and 0.69 GFLOPs for a 30-frame input. MHRGait++ consistently improves silhouette recognizers with a favorable accuracy-efficiency trade-off. These results establish rig-space articulation as an effective standalone gait representation and a complementary cue to projected body shape. Our code is available at https://github.com/duanhuiran/MHRGait.

Hand-object interaction (HOI) modeling remains challenging because it requires joint reasoning about hand articulation, object geometry, contact, semantics, and dynamics under severe visual uncertainty. Foundation models introduce transferable prior knowledge learned from large-scale cross-domain data, offering new ways to address these challenges beyond task-specific data and models. However, the rapidly growing literature remains fragmented, and existing studies typically describe these methods simply as ``using large models'' without systematically characterizing what knowledge is introduced, where it enters the HOI pipeline, or which HOI uncertainty it helps reduce. This survey presents the first systematic review of foundation-model priors for HOI. We organize the literature into six HOI tasks spanning reconstruction and generation. More importantly, we establish a taxonomy of eight foundation-model sub-priors grouped into geometric, semantic, and visual families. Geometric priors encompass shape retrieval, shape reconstruction, and spatial reconstruction; semantic priors include semantic grounding and language reasoning; and visual priors cover visual representation, image generation, and video generation. Based on this taxonomy, we systematically analyze how different priors are represented, injected, and adapted across HOI pipelines and tasks. Beyond how foundation models empower HOI, we further examine how HOI-derived knowledge is used in robot learning, including human-data pretraining, human-to-robot skill transfer, and HOI-to-robot data generation. Finally, we summarize datasets and evaluation protocols, and discuss limitations and future directions toward more generalizable HOI systems. To support long-term progress, we curate a live repository that continuously aggregates emerging methods and benchmarks.

The passive adaptability inherent in soft robotic hands affords them advantages in applications that require safe and compliant interaction. However, existing soft robotic hands often struggle to simultaneously achieve adequate output performance and easy manufacturing due to their complicated structures. In this paper, we introduce the asymmetric origami bending (AOB) pattern for generating bending motion and the asymmetric dual-chamber (ADC) design for obtaining multifunction capability. The AOB single (AOB-S) chamber and AOB dual-chamber (AOB-D) units are designed and constitute the finger and palm actuators of the proposed Origami-inspired SOft Robotic (OSOR) hand. The OSOR hand achieves bio-inspired fingers-palm motions and adequate output performance within a monolithic structure that significantly simplifies the manufacturing process. By defining the asymmetric ratio to characterize the geometric asymmetry of the unit, the analytical models of the AOB and ADC structures are proposed. The Finite Element Analysis tool for the design of AOB actuators is obtained by geometric analysis. The asymmetric origami design grants the integrated manufacturing of the OSOR hand through a Selective Laser Sintering printing process with a single thermoplastic polyurethane material. The model and simulations are validated by experimental results. Experiments show the finger and palm maximum bending motion range of 203° and 40°, respectively, with output forces of 6.3 N and 16 N. The OSOR hand is capable of pinching a piece of tissue, stably grasping water bottles with two fingers, palm-only grasping, and completing the power grasps in the taxonomy of manufacturing grasps. The compactness, performance, and easy manufacturing of the proposed hand benefit the development of the soft robotic hand with new possibilities.

This paper presents an innovative design and stability analysis of an underactuated robotic finger with spatial mobility, designed to enhance gripping dexterity in robotic hands. The finger architecture incorporates a revolute joint at its base, enabling passive spatial rotation that facilitates both cylindrical and spherical grasping. With only two phalanges per finger, the design simplifies kinematic complexity while supporting precision and enveloping grasps. Stability criteria, based on the moment at the finger base joint induced by contact forces, are introduced to ensure reliable object gripping and prevent ejection during manipulation. The study also examines a differential mechanism that distributes a single actuation torque across multiple fingers, allowing adaptive and coordinated motion. This mechanism enhances the hand's ability to grasp diverse object shapes with minimal pre-grasp adjustments, leveraging passivity for autonomous adaptation. Theoretical findings are experimentally validated using a fully mechanical prototype, demonstrating versatility in performing cylindrical, spherical, parallel, and enveloping grasps. The integration of underactuation-both within individual fingers and among multiple fingers-reduces mechanical complexity, cost, and control demands while preserving functional adaptability. This work advances the development of compliant robotic hands suitable for applications requiring dexterity and robustness, such as agricultural robotics, logistics, assistive technologies, and waste sorting. Future research will focus on automating actuation and refining control strategies to further improve grasp stability and precision, paving the way for autonomous manipulation in unstructured environments.

Hand-Object Interaction (HOI) synthesis is a cornerstone for animation production and embodied AI. Despite the strong priors of video foundation models, multi-view consistent HOI synthesis remains challenging due to complex hand motions and occlusions. We present HarmoHOI, a unified diffusion framework that jointly and harmoniously generates synchronized multi-view HOI videos and globally aligned 3D point tracks. Our core insight is that robust multi-view consistency fundamentally requires globally aligned 3D geometry and motion. To this end, we propose a Mixture of Multi-view Diffusion Transformer that co-models RGB videos and 3D point tracks. By representing point tracks as pseudo-videos, we align 3D geometric signals with the 2D latent space of foundation models, thereby minimizing the domain gap and easing adaptation of priors. To further ensure geometry consistency, we introduce Global Motion Aligning Diffusion, which refines coarse point tracks into metric-scale, globally aligned 3D trajectories. HarmoHOI enables on-the-fly co-evolution of 2D appearance and 3D motion during denoising. To overcome the scarcity of multi-view HOI data, we employ a hybrid data curriculum learning strategy that successfully transfers generic priors from single-view data to synchronized multi-view generation. Experimental results show that HarmoHOI achieves state-of-the-art performance in visual quality, motion plausibility, and multi-view geometric consistency. Project page available at https://droliven.github.io/HarmoHOI_project.

Dexterous in-hand manipulation requires continuous 6D pose tracking, yet the manipulating fingers inevitably occlude the object from the camera. We study how to structure the sparse haptic signals already available on multi-fingered hands, including proprioception, proximal force/torque, and binary contact, to complement a pretrained visual pose tracker under occlusion. We propose a kinematic-aware finger-level encoder and systematically compare it against four alternative designs through three levels of evaluation: per-frame refinement, sequential open-loop tracking, and closed-loop manipulation. Our experiments reveal that (i) per-frame evaluation cannot distinguish encoder quality, while sequential tracking amplifies architectural differences by up to 15 times; (ii) the structured encoder learns task-specific cross-modal gating, using vision exclusively for translation and dedicating one attention head to haptics for rotation, without explicit supervision; and (iii) compact finger-level tokenization with 4 tokens outperforms both flat fusion and joint-level representations, which suppress vision through norm dominance. We validate that improved tracking yields higher success in a downstream reorientation task and provide qualitative real-world demonstrations. Our project page is available at https://cold-young.github.io/kine-fuse/.

Dexterous manipulation is limited not only by algorithms but by a shortage of accessible hand hardware that combines human-scale morphology, ease of manufacturing or maintenance, tactile sensing, and practical cost. Existing dexterous hands tend to optimize some of these properties at the expense of others. We present MIDAS Hand, a low-cost, open-source, human-scale dexterous hand with integrated tactile sensing for manipulation research. MIDAS Hand provides 16 total degrees of freedom (DoF) with 13 active DoF, directly driven actuation with measurably low backdrive torque, and 283 three-axis tactile taxels in a compact 700 g package with a bill of materials under 3,000 USD. Built from 3D-printed components, it assembles in under three hours while providing the strength, repeatability, and maintainability needed for repeated real-world experiments. Alongside the hardware, we release a full stack: design files, build documentation, control and tactile Python APIs, simulation models, and retargeting and teleoperation pipelines. We characterize MIDAS Hand through workspace and grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing, showing that it offers a balanced, reproducible platform for tactile dexterous manipulation and human-to-robot data collection. Project page: https://midas-hand.com

Computer-use agents are becoming capable software operators, but their interface to desktop applications is still often a brittle motor layer: they look at screenshots, predict coordinates, click, and hope that the visible state changed as intended. This collapses target grounding, action execution, and outcome verification into a single ambiguous operation. We present Tactile, an open-source tool layer that gives agents a more reliable "hands and feet" for desktop use. Tactile converts heterogeneous UI evidence--operating-system accessibility semantics, OCR-grounded text, and visual fallback regions--into action-grounded interface states: compact target candidates with source labels, roles or text, state, geometry, executable affordances, and verification cues. Agents operate through an observe-ground-act-verify loop that prefers native semantic actions when available, falls back to OCR-grounded coordinates when visible text is the best evidence, and keeps full provenance for replay and failure attribution. On macOSWorld-style tasks, adding Tactile improves Codex Success@100 from 41.1% to 50.0% overall and from 45.2% to 55.3% on accessibility-adapted tasks; a 96-task cross-agent subset shows consistent gains across Codex, Claude Code, OpenCode, and Goose. These results suggest that reliable computer use requires not only stronger models, but also a reusable execution substrate that exposes software actions as semantic, verifiable, and auditable objects rather than anonymous screen coordinates.

Hand-object interaction (HOI) recognition requires capturing both hand manipulations and object transformations. However, existing video-language models often fall into shortcuts by relying on spurious correlations among hands, objects, or environmental context, rather than reasoning from the appearance and dynamics of hands and objects themselves. To address this limitation, we propose a new learning paradigm that combines (i) hand-object masked training, which enables robust reasoning from partial hand or object observations, and (ii) an HOI-dynamics-aware decoder that explicitly learns hand- and object-centric embeddings through auxiliary predictions of their locations and semantics, enhancing sensitivity to both cues. To systematically evaluate such cue-specific reasoning, we introduce Cue-Isolated HOI (CI-HOI), a new evaluation that assesses models' ability to predict actions from hand- and object-related cues independently. To enable CI-HOI, we curate the DEHOI testbed, which separates hand- and object-related observations for disentangled HOI evaluation through inpainting. Using DEHOI, we demonstrate both quantitatively and qualitatively that our training strategy exploits hand- and object-centric information more effectively than existing models. Our approach improves over existing models on DEHOI, standard action recognition, object state recognition, and even robot manipulation action recognition, leading to more robust HOI understanding.

Autism spectrum disorder (ASD) affects over 75 million individuals worldwide, yet scalable computational methods for remote behavioral screening remain limited. This study addresses two complementary challenges in automated detection of autism-related self-stimulatory behaviors from video: (1) identifying the optimal sequence-based neural network architecture and temporal sampling rate, and (2) characterizing data augmentation strategies for training on small behavioral datasets. For the first objective, long short-term memory (LSTM) and gated recurrent unit (GRU) models were trained on pose-derived features from the Self-Stimulatory Behavior Diagnosis (SSBD) dataset at frame sampling intervals of 1, 5, 15, 30, 45, and 90 frames. Both architectures exceeded prior convolutional neural network (CNN) baselines (62-76% accuracy), with peak accuracies of 97.5% (LSTM) and 98.75% (GRU) at a sampling interval of every 15 frames. For the second objective, ten data augmentation strategies were applied to an I3D transfer learning pipeline, with an ablation study quantifying the marginal contribution of each technique. Horizontal flip achieved the highest standalone accuracy (48.78%), while exclusion of upsampling from the augmentation pipeline produced the largest performance degradation, indicating its necessity for complex behavioral video augmentation. A personalized machine learning approach, in which per-subject models were trained and tested on temporally split segments of each video, produced consistent predictions (mean loss 1.84, SD 0.79). These results provide practitioners with concrete guidance on architecture selection, sampling rate, and augmentation strategy for video-based behavioral classification in data-scarce clinical domains.

Advances in learning-based robotic manipulation, such as Vision-Language-Action (VLA) models and Video Action Models (VAMs), heavily rely on high-quality teleoperation data. Their capabilities are strictly upper-bounded by the quality of the underlying human demonstrations. Current gradient-based retargeting algorithms often converge to different local minima, resulting in jitter that affects data quality and teleoperation experience. To address this, we introduce the Sampling-Based Retargeter (SBR), a novel gradient-free retargeting method drawn from the rich literature of sampling-based control and explicitly designed for low-jitter, real-time kinematic retargeting. We evaluate SBR both in simulation and through a rigorous real-world user study involving 18 participants performing 3 complex manipulation tasks. Compared to gradient-based baselines, SBR achieved the highest overall task success rate (54.1%) while significantly reducing operator cognitive fatigue, recording the lowest NASA-TLX workload score (36.4 out of 100). Ultimately, we establish SBR as a highly effective, intuitive retargeter for dexterous manipulation, providing the community with a rigorous benchmarking methodology to guide future retargeting research.

Synthesizing hand motion that matches the full body motion and the semantic labels is a difficult task due to their high degrees of freedom and the lack of semantic labels. To cope with this issue, we propose a prior-first, condition-second framework for body-conditioned hand motion completion. Our framework first learns a generic body-hand kinematic prior from large-scale unstructured and unlabeled motion data, capturing the intrinsic coordination between global body dynamics and hand articulation. Semantic control is then introduced through lightweight adaptation on top of the frozen prior, avoiding the need to relearn kinematic structure for each control interface. Our framework centers on a streaming, autoregressive body-hand prior that generates coherent, kinematically consistent hand motion from body dynamics in real time, using structured kinematic modeling to maintain mechanical body-hand coupling. To enable practical controllability under limited supervision, we introduce semantically-layered adapters that inject conditioning signals at appropriate kinematic levels, supporting both self-supervised attribute control and weakly supervised text-driven control with only a few hours of labeled data. Extensive evaluations demonstrate that our framework improves kinematic plausibility, robustness, and controllability compared to end-to-end conditioned baselines, particularly in low-resource and cross-dataset settings. We further showcase real-time inference and an interactive authoring workflow, highlighting the applicability to production animation pipelines. Homepage: https://AIGAnimation.github.io/HandPrior/

While recent research has focused heavily on dexterous grasp pose generation, less attention has been devoted to the execution of planned grasps. Under shape and position uncertainty, open-loop execution often yields uncoordinated contacts, causing undesired in-hand object motion and even grasp failures. To address this, this paper proposes a tactile-driven model predictive controller for adaptive and delicate execution of diverse dexterous grasps. Our approach emphasizes multi-contact coordination across both approaching and grasping phases, with three key novelties: (i) coordination-aware phase separation, (ii) arm-hand coordination to compensate for position errors, and (iii) adaptive force coordination to increase contact forces in a balanced manner. An analytical model is employed to relate contact forces to robot joint motions for predictive control. Our formulation imposes no restrictions on grasp types or contact configurations and integrates seamlessly with state-of-the-art grasp pose generation methods. We validate the approach through large-scale simulations involving 15k grasps across 478 objects on three robotic hands, and real-world experiments on 8 objects. Results demonstrate that our method achieves higher grasp success rates and reduced undesired object movements.

Markerless motion capture (MMC) techniques have been widely beneficial in biomechanical analysis of human movement; however, application to complex motions of the hand lags other musculoskeletal systems. The primary goal of this study was to evaluate the performance of a biomechanical reconstruction method that implements a gradient-based optimization approach with a biomechanical model in the loop for tracking dexterous, unconstrained hand movements using MMC. Using a custom, 8-camera setup, we acquired 121 video recordings from 6 participants performing 11 different tasks that spanned 6 hand postures, 5 object manipulation tasks, and involved motion of the proximal upper limb joints. Performance of the proposed MMC pipeline was directly compared to a more commonly adopted two-stage reconstruction method that first triangulates 2D keypoints from computer vision pose estimation algorithms to 3D and then enforces biomechanical constraints by solving a constrained inverse kinematics problem. Relative performance was assessed qualitatively by visual inspection and quantitatively using a computer vision metric. Our method generated solutions for all 121 video recordings; the two-stage method did not converge for 15% of the recordings. Across the remaining videos, our method produced more biomechanically plausible hand kinematics than the two-stage method and was more robust to occlusion effects during tasks that involved objects. The relative robustness of the end-to-end method suggests that it is more effective in utilizing the available 2D digital keypoint information. Automatic and biomechanically meaningful tracking of hand kinematics during dexterous movements has the potential to support clinical evaluation, rehabilitation monitoring, and studies of human motor control.

We present HandsOnWorld, a framework for hand-controlled egocentric video generation that forgoes multi-view and marker-based motion capture, learning instead from unconstrained monocular video. Such generality is bottlenecked by the scarcity of scalable 3D hand annotations: large egocentric corpora lack finger-level labels, whereas precise hand datasets are confined to narrow, instrumented settings, limiting prior hand-controlled generators to restricted scene distributions. We instead annotate 3D hands directly on in-the-wild egocentric video through monocular reconstruction, introducing a protagonist-centered annotation pipeline that filters the reconstructions at the action-semantic, image-quality, and 3D-geometric levels to build EgoVid-Pro, a dataset of clean, protagonist-only hand trajectories spanning 103K clips and roughly 12M frames across diverse everyday scenes. To resolve the camera-hand entanglement induced by large ego-motion, we further propose the Plücker Hand Map, a 3D-aware control signal that extends Plücker-ray representations from camera rays to the hand surface, disentangling camera and hand motion at the representation level. Experiments show that \method surpasses prior hand-controlled generators in reconstruction fidelity and control accuracy, and generalizes to out-of-distribution everyday scenes beyond the laboratory datasets on which prior methods rely.

Text driven hand object interaction (HOI) generation is gaining attention for immersive applications and robotics, yet producing physically plausible interactions remains challenging. Even when individual motions appear natural, small contact errors can cause conspicuous artifacts such as floating and interpenetration. Prior methods mitigate these issues using explicit contact cues or implicit grasp priors, but typically rely on multi stage pipelines and fail to model temporally evolving contact. We present JointHOI, a single stage diffusion framework that jointly generates 3D hand object motion and dynamic, distance based contact maps from text. By treating contact as an auxiliary inner modality, joint generation enables the model to learn contact motion coupling during training. At inference, contact guided sampling enforces consistency between generated contact maps and motion implied geometry, improving temporal stability and reducing penetration and floating. Experiments on GRAB and ARCTIC demonstrate consistent improvements in text adherence and physical plausibility over prior methods.

Generating 3D hand-object interactions is essential for applications in robotics, XR, and synthetic data generation, where flexible controllability and strong generalization to diverse object geometries are required. However, existing methods rarely satisfy these requirements, limiting their practical applicability. We present DCGrasp, a distance-aware controllable grasp generation system built on a novel grasp energy term. This term computes Distance Profile, a signed distance from each hand vertex to the nearest object point, coupled with distance-aware weighting, effectively capturing the semantically similar hand-object interaction in near-contact regions while remaining invariant to object and hand identity. Given various controllable signals, DCGrasp first generates a Distance Profile based on a Diffusion Transformer, together with a corresponding candidate hand pose. We then refine the candidate pose through optimization, enforcing consistency between the optimized hand pose and the generated Distance Profile in near-contact regions. Our experiments show that DCGrasp produces high-quality, physically plausible grasps with flexible user control, generalizing to diverse object and hand shapes and scales. Our work establishes a robust and versatile pipeline for the synthesis of controllable 3D hand-object interactions.

Sign languages are compositional systems where meaning arises by combining sublexical phonological parameters, such as handshape, location, and movement. While deep learning models for Sign Language Recognition (SLR) have achieved increased performance on translation benchmarks, it remains unclear whether these models distinguish abstract phonological features or merely rely on low-level statistical correlations. This work evaluates the phonological perception of SLR models trained on American Sign Language (ASL) by probing phonological sensitivity using minimal pairs and evaluating representational alignment with human behavioral data. Our results reveal that SLR models exhibit emergent phonological sensitivity, but with clear architectural trade-offs: pose-based models are sensitive to handshape contrasts, while pixel-based models better capture location changes. Furthermore, pose-based models learn latent representations that correlate with human perceptual similarity judgments (r~0.49). These findings suggest that while SLR models exhibit emergent phonology, current training paradigms are insufficient to scale them beyond their architectural inductive biases.

Dexterous manipulation policies can solve individual skills, but composing them to perform multiple tasks with a single hand remains challenging. Adding a new task on top of an existing manipulation skill often imposes conflicting demands on overlapping fingers and contact modes, causing destructive interference between preserving an existing manipulation outcome and executing a new one. We propose DexCompose, a role-aware residual composition framework that reuses pretrained dexterous policies for multi-task manipulation through explicit finger-level action ownership. Given two pretrained full-hand policies, DexCompose first collects successful post-task states from the first skill and performs release tests over candidate finger masks to identify which fingers are necessary for maintaining the established skill state. It then trains two asymmetric residual modules: a bounded residual stabilizer for task preservation, and a context-aware residual that adapts the frozen downstream policy only within the action subspace assigned to the new task. We evaluate the framework on 16 composite dexterous manipulation tasks spanning four object-retention skills and four downstream interactions. DexCompose achieves a 77.4% average composite success rate, demonstrating that structural action ownership with dual residuals offers a promising direction for composing dexterous skills beyond conventional policy chaining.

Accurate metric-space hand pose estimation (HPE) is essential for immersive human-computer interaction and robotics. However, most existing methods predict poses in a root-relative coordinate system and cannot estimate the hand in absolute metric scale. In this work, we observe that the intrinsic proportional relationships among human hand bones encode stable anthropometric priors that implicitly correlate with the overall metric size of the hand. Leveraging this insight, we present ScaleHP, an end-to-end one-stage hand pose estimation framework that bypasses fragile extrinsic depth modules to recover the hand in metric space. ScaleHP employs a transformer-based decoder with a novel scale token to fuse multi-scale morphological and appearance features. By solving for metric coordinates through a perspective-constrained least-squares approach, we achieve high-precision pose estimation in the camera coordinate system. ScaleHP delivers state-of-the-art performance, including 35.8 CS-MPJPE on FreiHand and 4.6/5.9 PA-MPJPE on DexYCB and HO3Dv3. These results demonstrate that internal biological constraints significantly reduce relative geometry and absolute metric errors, offering a robust solution for generalized, real-world hand tracking.

Grounding deictic gestures in natural images is fundamental to AR and human-robot collaboration, providing a basis for seamless spatial interaction. While Transformer-based visual models have achieved significant progress in general object detection, their global attention mechanisms often neglect micro-geometric relationships, degrading orientation accuracy. In pointing tasks, this deficiency manifests as an inability to accurately capture the pointing ray implied by finger poses, which results in pointing drift and localization ambiguity when dealing with distant or densely packed objects. To address this, we propose VistaRef, a framework designed to explicitly enhance spatial orientation awareness. First, we develop the Local Hand Entity Modeling (LHEM) module, which incorporates hand-pose embeddings to strengthen the model's capability to capture subtle finger deviations. Second, drawing inspiration from multi-view geometry, we construct the Geometric Ray Modeling (GRM) module to transform implicit orientation information into explicit spatial geometric features, guiding feature aggregation and deep fusion via attention mechanisms. Furthermore, we introduce a novel Orientation-Consistent Alignment Loss (OCAL) to synergistically supervise hand presence and pointing consistency, ensuring that all architectural improvements collectively serve the core objective of spatial localization. Experimental results demonstrate that VistaRef significantly outperforms the baseline, achieving a 14-point absolute gain in grounding accuracy. Qualitative analysis further confirms that VistaRef effectively models the geometric correlation from hand to target, bridging the spatial perception gap inherent in traditional Transformers for complex scenarios. Code: https://github.com/lingli1724/VistaRef.

Headline accuracies on the Tuebingen cause-effect pairs are routinely compared across papers even though each is measured under its authors' own protocol -- different pair subsets, weightings, model-selection, and decision rates. We argue this is the wrong comparison and run the right one: a same-hands re-evaluation in which every method is run by us on the identical 102 pairs, with one strict rule -- no tuning and a decision forced on every pair. As a clean reference point we introduce a deliberately minimal baseline: sorted-conditional compression, which feeds quantized, sorted, first-differenced data to an off-the-shelf compressor (bz2) and has zero fitted parameters. Under the common ruler the ranking differs sharply from the literature. Our baseline reaches 74.7% weighted accuracy (p = 3.7e-7); on the same 100 pairs that SLOPE is evaluated on it scores 76.0%, a 1.2-point gap below the authors' own forced-decision SLOPE (77.2%) that is well inside noise (McNemar p = 0.39). A faithful re-run of RECI lands at 70.7% -- inside the original authors' reported error bar, not the 77.5% often quoted (which we trace to a mis-copied cell). SLOPE's published 82.4% is a decided-subset figure: scoring the authors' own stored output only on the pairs its significance test chose to answer reproduces 81.7%. Under the common ruler the methods cluster in the low-to-mid 70s and the zero-parameter compressor ties the strongest of them. We document the mechanisms that inflate published figures (test-set model selection, significance-gated abstention) and contribute two further results: compression score magnitude is a model-free confounding flag (p = 2.8e-68), and a pre-registered falsification test fails in an instructive way that bounds the method's theoretical interpretation. Code, pre-registrations, and per-pair outputs are released.

As machine learning models grow more influential and opaque, algorithmic fairness and explainability are critical for ensuring accountability. However, we demonstrate that these auditing mechanisms are themselves vulnerable to subtle manipulation, camouflaging the influence of protected features. While prior work on data-agnostic attacks has exposed this vulnerability, they leave behind detectable artifacts that compromise their stealth. We introduce Targeted Identity Re-Association (TIRA) attacks, a novel family of attacks that iteratively and probabilistically manipulate a model's outputs without requiring access to the model's internals or feature representations. We formalize two algorithms: Probabilistic Micro-Shuffling (PMiS), which applies localized adjacent swaps, and Probabilistic Rank-Shift Micro-Perturbation (PRSMP), which introduces small, randomized rank shifts. We empirically demonstrate that TIRA attacks are highly effective at pushing fairness metrics towards ideal values. Crucially, TIRA attacks successfully confound SHAP-based explanations, leaving effectively zero residual attribution for protected features, a major improvement over prior work.

A-mode ultrasound (US) has emerged as a promising modality for hand and wrist motion tracking. Prior works have mainly addressed static gesture classification or regression of a few degrees of freedom (DoFs), typically relying on non-wearable systems and external computing devices, and highlight the need for strategies to ensure robustness to sensor repositioning. In this work, we propose a framework for robust whole-hand and wrist kinematic tracking via wearable A-mode US using the WULPUS platform, tackling the regression of 23 DoFs directly on the probe. First, we introduce a compact (11285 parameters) multi-output convolutional neural network combined with an incremental training strategy, which improves inter-session generalization and reduces mean absolute error by more than 17% compared to a non-incremental approach. Second, we demonstrate, for the first time, the feasibility of end-to-end hand and wrist kinematic tracking entirely on-device. We deploy the model on the WULPUS nRF52832 microcontroller, achieving 0.73 mJ per inference, 29.1 ms latency, and showing the feasibility of full operation (data acquisition, online inference, and BLE streaming of results) within 33 mW, enabling up to 36 hours of continuous use and an 88% reduction in wireless bandwidth compared to raw data transmission.

Point-cloud goals provide a direct way to specify dexterous in-hand reorientation: instead of defining an object-specific pose frame or estimating 6D pose at test time, the policy is given the desired 3D geometry of the object. Yet raw point-cloud goal conditioning is poorly conditioned for policy learning. Current and goal clouds are unordered, independently sampled, and often visibility-dependent, so their discrepancy entangles object rotation with permutation, resampling, and unstable correspondence structure. For this reason, prior point-cloud manipulation methods typically add structure outside the representation itself, such as explicit pose or relative-pose inputs, dense flow features, or distillation from privileged teachers. We close this gap by learning a rotation-aware point-cloud embedding whose Euclidean latent distance is calibrated to the SO(3) geodesic error between object orientations. The resulting representation turns current-goal comparison into a smooth control signal, allowing a model-free RL policy to act from current and goal point-cloud embeddings, proprioception, and centroid metadata, without object pose, relative pose, dense flow, or teacher-action supervision. In in-hand reorientation experiments, this interface matches privileged-state and distillation-based baselines while avoiding brittle test-time computation of structured pose or flow inputs. These results suggest that point-cloud goals become practical for this task when the representation, rather than an external module, encodes the task-relevant geometry of rotation. We also show evidence that generic visual point-cloud pretraining is insufficient for such a current-goal comparison because it discards the task-relevant state and preserves only shape features.

Human hand grasp adaptation depends mainly on the synergy between physical structure and biological feedback. Inspired by this biomechanical principle, the Safe Thumb-Index Robotic (STIR) Hand was developed as a minimal, lightweight, and low-cost two-digit prototype featuring an asymmetric thumb-index configuration. By pairing an underactuated, tendon-driven mechanical design with flexible strain gauges embedded into silicone-encapsulated soft joints, the system achieves passive grasp adaptation while establishing both internal proprioception and external perception. Unsupervised analysis was carried out on a dataset of the STIR hand grasping 20 different objects, along with an object classification task and an ablation study to highlight the contribution of the soft joint sensors. The object classification task discriminated object size, shape, and material stiffness with a high classification accuracy. In contrast to traditional industrial grippers and robotic hands, the STIR Hand demonstrates that sensorized compliant joints significantly improve overall sensitivity and ensure safe grasping, while remaining independent of additional fingertip tactile elements or external vision systems. Finally, a comparison to similar devices grasping identical objects validates the utility of the STIR Hand.

Establishing a universal benchmark for tactile representation learning in robotic manipulation remains challenging due to the diversity of tactile sensor designs, data formats, and robot embodiments. Rather than seeking to establish such, we explore a scalable and promising direction for future development: egocentric vision paired with full-hand tactile data. To this end, we introduce \textbf{HT-Bench}, a large-scale multi-task benchmark for dexterous full-hand tactile sensing, comprising 10M RGB frames and 7.8M tactile frames collected across 226 tasks. HT-Bench evaluates tactile representations from three key perspectives: whether they encode meaningful contact geometry, whether they can align tactile observations with visual information, and whether they generalize to unseen tasks. To assess these capabilities, HT-Bench includes four tasks: fine-grained tactile similarity retrieval, masked tactile inpainting, vision-to-tactile synthesis, and multimodal tactile frame prediction. We further propose \textbf{HandTouch}, a vector-quantized vision--tactile encoder that learns tactile representations through progressive spatial, cross-modal, and temporal training. Across HT-Bench, HandTouch consistently outperforms representative tactile encoder baselines, improving Recall@5 on fine-grained tactile similarity retrieval from 74.65% to 85.23%, reducing RMSE on masked tactile inpainting from 0.022 to 0.010, and increasing OOD cIoU on vision-to-tactile synthesis from 0.628 to 0.705. These results demonstrate the effectiveness of HandTouch and suggest that large-scale egocentric full-hand tactile data provides a scalable basis for evaluating and advancing tactile representation learning in dexterous manipulation.

Mixed reality applications can be designed for hand rehabilitation. Augmented reality (AR) head mounted displays (HMDs) specifically allow for ecologically valid tasks because individuals can see their real environment and interact with real objects while receiving additional cues on the HMD. While these applications rely on accurate hand pose estimation, there is a gap in investigating the influence of hand impairment or occlusion from real-object interactions on pose estimation accuracy. Further, comparisons between AR HMD predictions and state-of-the-art pose estimation methods have not been established. The current study assessed pose estimation accuracy of the HoloLens 2 HMD and state-of-the-art pose estimation algorithms (WiLoR, HaMeR, WildHands, and MediaPipe) while individuals with cervical spinal cord injury (cSCI; n = 13, Neurological Level of Injury: C3-C6; American Spinal Injury Association Impairment Scale: A-D) and 15 uninjured controls interacted with clear and opaque objects. Ground truth estimates of 3D joint positions were generated via triangulation from a multi-camera setup. Pose estimation accuracy did not differ between the cSCI and uninjured control groups suggesting that 3D joint predictions from the HoloLens 2 and pose estimation algorithms can generalize to populations with hand impairment. Further, clear objects provided a small accuracy advantage over opaque objects (0.1 mm) and predictions from both WiLoR and HaMeR were slightly more accurate than the HoloLens 2 (2 mm). Overall, these results suggest that the HoloLens 2 may be viable for hand rehabilitation applications and the dataset generated can be used to refine pose estimation methods for hand-impaired populations.

Dexterous robotic hands face a longstanding trade-off among dexterity, compactness, and affordability. Particularly, high-degree-of-freedom designs typically demand complex actuation and transmission, hindering integration into human-scale forms. To address these challenges, this work presents a compact, low-cost linkage-driven anthropomorphic hand that achieves high dexterity, structural integration, and human-hand-like functionality. The hand integrates 20 joints driven by 16 independent actuators, with all actuation, sensing, and transmission components compactly embedded within a human-hand-sized structure. The resulting prototype weighs only 320g at a total cost below USD 400. To meet these objectives, a hybrid mechanical architecture combining planar and spatial linkage mechanisms is proposed, enabling decoupled multidirectional motion, biomimetic joint synergies, and high passive load-bearing capability. The thumb further incorporates biomimetic features supporting human-like reconfiguration and opposition movements. Through the coordinated integration of these mechanisms and structural layout, the prototype achieves a highly integrated design with anthropomorphic dexterity. Experimental evaluations demonstrate that the hand achieves the maximum Kapandji score, reproduces all 33 Feix grasp types, and performs stable grasping and dexterous manipulation across a wide variety of daily objects and tools. These results validate the proposed hand as an affordable, compact, and mechanically efficient platform for dexterous manipulation, teleoperation, and robot learning in human-centered environments.

Understanding hands and the objects they interact with, both directly and through tools, is a key step for tasks ranging from action perception to 3D reconstruction and robotics. Our paper provides several contributions to the Hand-Object Interaction (HOI) understanding literature: (1) HOI-DETR, a new framework that introduces hand-object and object-object interactions to the Co-DETR architecture to produce a state-of-the-art method; (2) a comprehensive HOI evaluation suite of 4 diverse datasets, including a video benchmark derived from the HD-EPIC dataset and fresh annotations that improve the Hands23 benchmark and (3) a trained checkpoint that significantly improves the state of the art across Hands23, HOIST, FineBio, and HD-EPIC, including mAP gains of over 20 percentage points on Hands23 and FineBio. Our ablations confirm the contributions of each model component.

We present ART-Glove, an articulated tactile glove designed to capture contact-grounded dexterous demonstrations while preserving human dexterity. ART-Glove makes hand-side contact geometry explicit with 16 rigid functional surfaces covering the fingers, thumb, and palm. Twenty-two anatomically aligned joints connect these surfaces and allow them to follow human hand motion during dexterous manipulation. Encoder-based sensing tracks surface motion, while dense piezoresistive tactile sensing records contact over the same surfaces. The complete system captures synchronized 22-DoF joint measurements and 2048-taxel tactile measurements at 120 Hz. We evaluate ART-Glove across experiments on motion freedom, joint sensing, tactile sensing, and contact-rich interaction capture, demonstrating its ability to preserve human dexterity while recording contact-grounded information that can support downstream dexterous robot learning.

Robust, high-fidelity 3D hand capture, while fundamental to digital human creation, remains challenging with practical multi-view systems that balance rich photometry with the geometric ambiguities of reconstruction arising from limited viewpoint density. This paper presents an end-to-end pipeline for dynamic hand performance capture and registration, specifically designed for view-efficient setups ($\sim$20 views). We address key challenges with two primary innovations. First, to overcome reconstruction difficulties like limited view overlap and background clutter, our mask-free neural method robustly extracts detailed hand geometry and appearance from unmasked images using scene parameterization and scenario-specific density regularization. Second, addressing registration challenges such as accurately capturing non-linear skin deformations and ensuring plausible results during severe self-contact, we propose a physics-inspired framework. It aligns reconstructions to a personalized hand model by optimizing intrinsic volumetric offsets within its canonical tetrahedral mesh, alongside pose parameters. This approach, supported by robust losses and optimization, captures fine surface deformations, ensures plausible results under severe articulation and self-contact, and demonstrates strong tolerance to input noise. We demonstrate the scalability and robustness of our automated pipeline on an extensive dataset of over 12,000 sequences, from which we also derive a large-scale, high-quality synthetic 2D/3D hand dataset for training downstream tasks. This showcases its effectiveness for single hands, intricate two-hand interactions, and natural hand-object manipulations. Our method achieves state-of-the-art reconstruction fidelity in view-efficient, unmasked scenarios and highly accurate registration. Our project page are available at https://vephand.github.io/.

The growing demand for high-fidelity 4D hand-object interaction (HOI) data in embodied AI and spatial computing is currently bottlenecked by the reliance on pre-scanned object templates and physical markers. While recent methods have demonstrated promising results in reconstructing 4D hand-object interaction from videos, they are highly sensitive to initial estimates of hand and object poses. Yet, estimating these poses from images is challenging, in particular under severe occlusion which is inherent in hand-object interaction scenarios. We propose a novel system for the robust and accurate reconstruction of hands and objects from synchronized and calibrated multi-view videos without requiring any templates or markers. Our system consists of two main components with key innovations: (1) a multi-view feed-forward transformer model that aggregates cross-view geometry and temporal cues to provide a reliable, metric-consistent initialization for both poses and dense object geometry, and (2) a hand-object physics-aware Gaussian-based optimization framework to refine the initial estimates, integrating tetrahedral constraints, collision refinement, and appearance decomposition to produce physically plausible and visually accurate reconstruction. Validated on public benchmarks and an extensive internal dataset, our pipeline achieves highly robust, artifact-free reconstruction, providing an efficient foundation for automated 4D asset generation. Our project page are available at https://zyshen021.github.io/HOSTPG/.

Designing anthropomorphic robotic hands that balance functional dexterity with mechanical simplicity remains a significant challenge. Inspired by human hand synergies, this paper presents the SyLink Hand, an anthropomorphic dexterous hand that integrates biomechanical synergy principles with linkage-driven transmission mechanisms to achieve a high degree of anthropomorphism in appearance, kinematics, and functionality within a compact and cost-effective architecture. Biomechanical analysis of natural hand motions using motion capture gloves reveals strong kinematic correlations among hand joints, providing the basis for a simplified yet functional degree-of-freedom (DOF) configuration. Guided by these synergistic characteristics, optimized linkage mechanisms are employed to coordinate multiple joint motions and reproduce natural finger trajectories. A novel spherical four-bar linkage is further proposed to achieve decoupled flexion/extension (Flex/Ext) and abduction/adduction (Abd/Add) at the metacarpophalangeal joint within a compact form factor. The resulting prototype integrates 19 joints driven by 11 actuators, with a total mass of 520g and a manufacturing cost of approximately USD 400. Experimental evaluations demonstrate its human-like kinematic performance, high load-bearing capability, and versatile grasping and manipulation skills. These results validate that the synergy-inspired, linkage-based design effectively balances anthropomorphism, mechanical simplicity, and functional versatility, highlighting its potential for practical deployment in dexterity-demanding robotic applications.

Dexterous robotic hands are usually formulated as high dimensional active control systems governed by degrees of freedom, actuation, and algorithms. Human hand dexterity, however, is partly encoded in the physical architecture of bones, ligaments, tendons, aponeuroses, and intrinsic muscles. This work describes that contribution as two linked forms of structural intelligence: structural prior generation, in which wrist to finger tenodesis, FDS/FDP routing, and the dorsal extensor hood transform low dimensional posture inputs into default grasp configurations and PIP to DIP coordination; and muscle mediated modulation, in which extrinsic muscles, lumbricals, and interossei regulate MCP posture, distal stability, fingertip force paths, and contact states around that default state. Based on this framework, MCR-Bionic Hand is developed as a 1:1 musculoskeletal biomimetic hand integrating a two row eight bone wrist, cross wrist tendons, anatomical flexor routing, volar plate and collateral ligament constraints, the dorsal extensor hood, and intrinsic muscle pathways within one body. Functional demonstrations and geometric mechanical models show that wrist posture induces multi joint pre shaping, the extensor hood maps PIP posture to a coupled DIP response, and intrinsic plus pathways modulate distal stability and fingertip action direction after grasp formation. Contact rich tasks, including coin rotation, pen transfer, dorsal coin flipping, and cube manipulation, show that MCR-Bionic links low dimensional state generation with fine post contact modulation. These results suggest that anatomical biomimetics is valuable not for visual similarity, but for identifying human hand structures that perform part of control.

Designing anthropomorphic dexterous robotic hands remains challenging as the design space straddles morphology, actuation, and sensing properties, and performance metrics span both task-dependent and task-agnostic. Existing optimization methods are often unstructured or consider only a single performance metric, limiting systematic comparison and targeted refinement. While the design considerations of the entire hand are significant, the individual finger properties play a key role in dexterity. By developing a robotic hand platform where fingers can be modularly integrated into a full teleoperated hand, we propose that optimizing the fingers can significantly improve overall hand performance. This approach enables rapid screening of different finger-level prototypes through a number of quantitative benchmarks before their integration into the hand for task-level validation. Candidate finger designs (incorporating variations in joint, bone, skin, and sensor placement) are assessed using both mechanism-oriented and task-relevant metrics, which establish a quantitative link between component design and full hand embodiment. The framework is validated through the development of an anthropomorphic robotic hand with optimized fingers, demonstrating how these fingers enable performance improvements across tasks, including multi-object grasping and light bulb screwing.

Dexterous hands are essential for fine-grained manipulation, but their hardware designs vary substantially across embodiments. Differences in kinematics, joint definitions, and degrees of freedom make it difficult to define a shared state representation compared with parallel grippers. As a result, dexterous-hand data remains fragmented and difficult to use for joint training. In this work, we propose the Unified Dexterous Hand Model (UDHM), which maps human and robot hand states into a shared 22-DoF semantic interface. Based on UDHM, we introduce UniDexTok, a retargeting-free state tokenizer that learns embodiment-conditioned discrete tokens from standardized real joint states. UniDexTok provides a unified representation for heterogeneous dexterous hands without relying on retargeting or simulation data. Compared with the recent baseline UniHM, UniDexTok reduces MPJAE from 15.63 degrees to 0.16 degrees and MPJPE from 18.51 mm to 0.18 mm, corresponding to error reductions of 98.98% and 99.03%, respectively. These results improve reconstruction from centimeter-scale to sub-millimeter accuracy. Experiments further show that data from other embodiments improves target-embodiment reconstruction accuracy, demonstrating the benefit of cross-embodiment tokenization. UniDexTok also shows strong zero-shot and few-shot reconstruction ability when new dexterous hands are introduced.

Robotic foundation models pre-trained on human demonstration videos have shown promise, but a significant embodiment gap remains when the resulting policies are deployed on real robots. A common remedy is to fine-tune these models on robot-specific demonstrations. However, robot data collection can be prohibitively expensive and time-consuming, which is particularly acute in dexterous manipulation, e.g., teleoperating a multi-fingered hand for even a single atomic task can take days. To address this, we introduce Dexterous Point Policy, a framework that learns dexterous manipulation policies directly from human videos and requires no robot demonstrations. Our core insight is that a unified 3D keypoint representation can bridge human and robot embodiments when used for both observations and actions. Specifically, we extract 3D keypoints of task-relevant objects and human hands from raw videos, and train an autoregressive transformer over these keypoints. We observe that at the keypoint level, specifically the wrist and fingertips, human and robot behaviors closely align, enabling direct policy transfer. On a suite of real-robot tasks spanning pick-and-place and tool use, Dexterous Point Policy attains 75.0% success, whereas a state-of-the-art VLA baseline reaches only 1.0%. Furthermore, our method generalizes strongly to unseen scenarios, including multi-object environments and novel object categories.

Modern video diffusion models generate increasingly realistic and temporally coherent videos, motivating their use as candidate world simulators. Yet it remains unclear whether these models internally encode physical structure, or merely reproduce motion patterns seen during training. We study this question by probing video diffusion models along latent trajectories corresponding to real videos with known physical plausibility. To obtain such trajectories, we approximately invert the deterministic sampling process by integrating the learned velocity field backward from a clean video latent to noise, giving access to the model's intermediate states and attention maps. Using these recovered trajectories, we show that physical plausibility is linearly decodable from diffusion transformer states across IntPhys and InfLevel, reaching around 81.27% average accuracy and outperforming dedicated representation-learning baselines such as V-JEPA and VideoMAE. Surprisingly, this signal is absent from the VAE latent input and emerges inside the denoising transformer itself, despite the model not being trained with a self-supervised predictive objective. These findings suggest that physically meaningful representations can arise as a byproduct of generative denoising.

We present PHAF-Personalized Hand Avatars in a Flash, a personalized photo-realistic hand avatar which provides high quality multi-view renders from just two images (dorsal and palmar views).Unlike slow optimization-based techniques, PHAF generates fast personalized textures for real-time deployment on edge devices. Our approach combines semantic guided mesh alignment and densified texture extraction to transfer high-frequency details efficiently. A view-based inpainting network refines textures ensuring smooth, continuous appearance. PHAF generalizes to novel viewpoints and leverages a parametric hand model for accurate articulations, making it compatible with standard graphics engines. Experiments show it is comparable to existing methods in visual fidelity while drastically reducing texture generation time by 30 times, enabling practical AR/VR applications.

Human demonstrations provide strong priors for robot manipulation, yet it is non-trivial to transfer them to execute on real robots due to the kinematic gap. In dexterous manipulation, it remains challenging to track long-horizon, contact-rich sequences even in simulators: a reference-tracking policy must keep objects on their target trajectories while preserving demonstrated joint motion and contact timing. Existing approaches often rely on hand-crafted reward tuning that require per-sequence tuning and break under limited interaction budgets. We introduce ConTrack, a reinforcement learning (RL) framework that scales with tracking data. ConTrack treats object tracking as a constraint and allocates remaining control authority to motion fidelity, which allows it to adapt task--style trade-offs online using a dual-variable update. In addition, ConTrack also stabilizes long-horizon learning with an adaptive mid-trajectory reset library that reuses policy-reachable simulator states. Our qualitative and quantitative results in simulation tracking and real robot demonstrate that ConTrack improves success and object pose accuracy significantly over prior arts while preserving joint and contact fidelity. Website: https://www.lyt0112.com/projects/ConTrack.

Recent advances in 4D Human-Object Interaction (HOI) generation have enabled increasingly realistic motion synthesis, particularly for single-object manipulation. Yet current research overlooks an inherent property of human behavior: people naturally coordinate both hands and manipulate multiple objects simultaneously. To address this gap, we present Dex2HOI, a unified diffusion model for single- and two-object HOI synthesis from text. At its core, Dex2HOI employs a Dual-Stream Diffusion approach, where each object is processed in a dedicated interaction stream and coordinated through bidirectional cross-attention. To synthesize the final motion, we introduce a Motion Fusion Network integrated with novel hand-relative object representations and contact-aware conditioning applied across the whole sequence. By sampling the diffusion process autoregressively over prefix-conditioned windows, Dex2HOI generates arbitrarily long sequences at real-time speed omitting redundant test-time optimization, achieving up to x540 inference speed-up over prior state-of-the-art methods. Extensive evaluation on both single- and two-object benchmarks demonstrates state-of-the-art quantitative results, marking a step beyond conventional single-object HOI generation and toward expressive multi-object manipulation. Code and models will be released upon acceptance.

Reconstructing the motion of objects from videos is a key component for embodied AI and robot manipulation. While diverse approaches to object pose tracking have been studied, they rely heavily on strong external priors, such as depth data or 3D templates, and remain highly vulnerable to severe occlusions by hand grasps despite the use of explicit masks. In this work, we present ComPose, a 6DoF object tracking framework designed for hand-aware object pose estimation from RGB video. Rather than treating the hand purely as an occluder, our method harmonizes hand motions as a \textit{complementary cue} for object tracking. In detail, we recover a variety of object motions over time by combining object and hand cues from foundation models within a unified tracking pipeline. Here, ComPose adaptively selects informative hand joints, combines object- and hand-derived cues for motion estimation, and refines the resulting object motion using visible geometric evidence and a learned correction. We further enforce the temporal consistency over both rotation and translation, yielding stable 3D object trajectories over time without any external smoothing. Extensive experiments show that our method is accurate, efficient, and robust under severe hand occlusion and geometric ambiguity. In addition, the resulting trajectories can also effectively transfer to downstream robot manipulation by enabling robots to reconstruct human actions from online videos.