Vision Sensors

Autonomous nano-UAV navigation requires accurate ego-motion estimation under stringent size, weight, power, and computing (SWaP-C) constraints, where visual sensors and LiDARs exceed payload limits, optical flow degrades in low-texture scenes, and inertial-only state estimation is susceptible to accumulated drift. While multi-zone time-of-flight (ToF) arrays provide a lightweight metric complement, 6-DoF estimation from merely 384 ranges per frame is challenged by invalid returns, anisotropic observability, and temporal computational scaling. We propose TIO-FORMER, a camera-free, optical-flow-free, and mapless range-inertial odometry framework driven by an IMU and an ultra-lightweight (15 g) payload of six orthogonal 8 x 8 ToF arrays. Our frontend pairs consecutive range grids with a bilateral gated difference, while IMU-guided cross-attention dynamically routes directional features conditioned on platform kinematics. A Streaming Causal Transformer couples an uncompressed Local KV cache with compressed Chunk-FIFO memory, maintaining bounded inference cost and memory footprint independent of flight duration. In real-flight evaluations, TIO-FORMER reduces open-loop position error by 54.4% compared to nano-UAV optical flow and by 66.4%-89.1% over learned inertial baselines. We also evaluate performance across multiple environments and robustness under severe sensing degradation. Deployed on an edge RISC-V companion computer, TIO-FORMER achieves a P95 latency of 10.466 ms and peak resident memory of 6.324 MiB (less than 5 percent system RAM), demonstrating that sparse range sensing provides practical geometric anchoring for resource-constrained micro-aerial robots. Code is available at https://github.com/Ly041021/TIO-Former.

Dynamic-vision-sensor (DVS) cameras generate events on a per-pixel basis with a $μ$s-level temporal resolution, calling for new algorithm-hardware co-design approaches compared to standard frame-based vision. While event-driven graph neural networks (EV-GNNs) emerge as a promising algorithmic solution, they raise new HW challenges by mixing dense-regular compute operations and sparse-irregular memory accesses. We present ETHEREAL, the first EV-GNN accelerator that scales to 640$\times$480 resolutions, thanks to a neighbor-parallel spline convolution engine and a 2D/3D-split memory hierarchy with a novel region-of-interest spatiotemporal caching mechanism. Measurement results demonstrate end-to-end inference with 25.6$μ$s latency and 1.7$μ$J energy per event on state-of-the-art workloads

Traditional TinyML systems for edge devices achieve high accuracy by relying on fixed-depth models that require a constant number of multiply-accumulate (MAC) operations regardless of the input complexity. This approach wastes critical resources in battery-powered Internet-of-Things (IoT) devices and limits the real-time performance of edge cyber-physical systems. Multi-exit execution schemes mitigate these issues and are widely used on high-end devices such as GPUs, but are rarely exploited on edge IoT devices because they require substantial rethinking given their strict memory and computational constraints. We address these aspects by designing and deploying, on an ultra-low-power GWT GAP9 System-on-Chip (SoC), a novel multi-exit computational scheme, demonstrating it on a MobileNetV2 convolutional neural network (CNN) for the ImageNet-100 classification task. Our approach introduces multiple exits at different CNN depths, each with a confidence-based gating mechanism that dynamically and autonomously decides whether to continue or stop inference. Comparing our multi-exit strategy to the standard MobileNetV2 on a GAP9 SoC, we show a 41% reduction in the average computational cost (from 313 MMAC to 185 MMAC), a 29% lower inference time (from 49 to 35 ms), and an energy saving of 24% (from 2.1 to 1.6 mJ per frame). All these improvements come with a ~1% loss in accuracy compared to the full-depth MobileNetV2, which achieves 80.5%. Finally, comparing our adaptable multi-exit scheme with a third-party state-of-the-art adaptive CNN, also deployed on the GAP9, we achieve more than 2x its computational efficiency, increasing it from 8.1 to 17.2 MAC/cycle.

Vision-based reinforcement learning holds strong potential for decision-making in controlled environment agriculture (CEA). However, its development is hindered by the scarcity of labelled crop images. To address this gap, LettuceVisSim, a lettuce growth simulator that generates labelled time series of crop images, was developed and validated. The simulator contains a process-based model (PBM) for shoot dry weight dynamics, a canopy layout algorithm for deriving canopy layout representations from shoot dry weight, and a Unity rendering engine for image generation. Five findings support the simulator. First, the PBM reproduced shoot dry weight under dynamic plant-density management with $\mathrm{R}^{2}=0.84$. Second, a piecewise cubic regression mapped shoot dry weight to potential projected area with $\mathrm{R}^{2}=0.94$. Third, the canopy layout representation was validated using 12 experimental datasets each having different dynamic environmental and spacing conditions. It reproduced the ground coverage ratio dynamics observed in measured images, achieving $\mathrm{R}^{2}=0.84$ when driven by measured shoot dry weight and $\mathrm{R}^{2}=0.40$ (0.76 excluding one outlier) when driven by PBM-simulated values. Fourth, the Unity rendering engine converted canopy layout representations into RGB and segmentation images at less than 10~ms. Fifth, a demonstration showed that a lighting-control policy can be learned and applied by observing only crop images that were generated with LettuceVisSim, providing a proof of concept of vision-based reinforcement learning in CEA using LettuceVisSim.

Objective assessment of Freezing of Gait (FoG) in Parkinson's disease (PD) relies predominantly on wearable Inertial Measurement Units (IMUs). While IMUs provide optimal kinematic precision, mandatory sensor attachment restricts continuous clinical deployment. Conversely, unobtrusive vision-based alternatives suffer substantial classification errors during turning-in-place tasks, where geometric self-occlusion degrades deterministic skeletal coordinates and obscures the high-frequency precursors required for FoG detection. To resolve these physical observation limits, we propose a supervised cross-modal subspace distillation framework. During optimisation, pre-trained kinematic data from IMU sensors and contextual clinical metadata act as oracles to guide a deployable visual architecture. By incorporating joint velocity and acceleration derivatives, utilising a confidence-based gating mechanism, the visual model mitigates some of the tracking errors during occlusion events. Empirical evaluations confirm this latent alignment transfers the predictive fidelity of hardware sensors directly into the visual representation, yielding $85.5\%$ accuracy, and $82.4\%$ balanced accuracy. All the while maintaining a vision only model at inference.

Driver alerting from dashcam video requires sequential decision-making under partial observability: a system must decide not only whether a scene is risky, but also when the evidence is sufficient to warn. Most existing accident anticipation models output a binary risk score, leaving ambiguous scenes to be handled by thresholding. We propose VLAlert, a vision-language alerting framework that casts warning generation as a tri-action policy over SILENT, OBSERVE, and ALERT. The OBSERVE action acts as an internal evidence-gathering decision that delays uncertain warnings and changes the next observation window, creating a lightweight perception-action loop for adaptive alerting. VLAlert uses Qwen3-VL-4B as a safety-evidence generator and pools hidden states from structured belief spans to form compact representations for danger estimation and policy prediction. We evaluate VLAlert on VLAlert-Bench, a unified per-tick benchmark from four real-world dashcam alert datasets, and further test transfer to held-out naturalistic ADAS takeover clips. On VLAlert-Bench validation, VLAlert achieves the highest deployment-oriented utility among tested baselines, with DAUS 0.4878 compared with 0.4752 for Open-BADAS, and improves AUROC, AP_tick, F1_t, and balanced accuracy from 0.610, 0.176, 0.276, and 0.581 to 0.689, 0.195, 0.297, and 0.648, respectively. On 221 held-out ADAS-TO-Critic clips, VLAlert improves R@5s from 74.2% to 88.7% and F1 from 0.585 to 0.686. These results indicate that adaptive observation and safety-focused VLM representations provide measurable gains for driver-facing alert decisions.

Dense semantic segmentation allocates computational resources uniformly across the entire image, regardless of scene complexity or task relevance. Inspired by biological vision, we investigate whether semantic understanding can be achieved more efficiently through digital foveated perception. We introduce a lightweight active-vision pipeline that combines saliency-driven fixation selection, high-resolution foveal observations, low-resolution contextual information, semantic accumulation, and adaptive computation. Beyond conventional dense prediction metrics, we use object-level evaluation to measure semantic understanding under sparse observations. On ADE20K-Object, a single foveated observation achieves 95.9% of the baseline Top-1 accuracy and 96.9% of the baseline Top-3 accuracy while requiring only 4.7% of the computational cost. At the scene level, semantic accumulation recovers 90.6% of the baseline object recall while using 58.6% of the computation. These results suggest that substantial semantic understanding can emerge from sparse observations when computation is allocated selectively, highlighting active vision as an efficient alternative to uniform dense processing and motivating evaluation protocols beyond conventional pixel-wise segmentation metrics.

Autonomous navigation in space requires reliable terrain assessment for safe operations, especially in underground environments with limited communication, computing resources, and power budget. This paper presents a lightweight method for real-time vibration-aware traversability mapping using a Light Detecting And Ranging (LiDAR) point cloud and Inertial Measurement Unit (IMU) measurements. An initial vibration proxy is estimated from terrain geometry by applying Random sample consensus (RANSAC) to local point-cloud patches produced by a Simultaneous Localisation And Mapping (SLAM) algorithm. In parallel, the IMU provides local observations of the vibration experienced by the rover during traversal. The point-cloud-based prediction is then corrected online using Recursive Least Squares, allowing the system to adapt the geometric estimate to the measured rover response. The approach is evaluated in a lunar analogue environment, an outdoor field, and an underground mine.

Preprocessing-based defenses are the standard first-line response to adversarial attacks on edge vision systems, requiring no retraining, no architectural changes, and widely recommended as model-agnostic mitigations. Yet the foundational evaluations of these defenses were conducted on residual or Inception-class architectures, not on the depthwise-separable CNNs that dominate edge deployments. This untested assumption leaves a gap in the security evaluation literature. This paper closes that gap by evaluating six preprocessing defenses against adversarial perturbations across both architecture families. Across all perturbation levels and defenses tested, the two depthwise-separable architectures show consistently poor recovery while the residual architecture shows partial recovery; ablation results are consistent with an architectural rather than parametric explanation, though only three architectures and one attack family are evaluated. Crucially, this failure is not merely a negative result. The same output divergence that disqualifies preprocessing as a recovery mechanism reveals a detection opportunity: preprocessing consistently disrupts clean predictions while leaving adversarial predictions largely unchanged, an asymmetry that is directly measurable without retraining or architectural modification. We further show that standard image quality metrics are unreliable proxies for defense effectiveness, a methodological gap in current evaluation practice. A practitioner decision framework is provided for adversarially resilient edge vision deployment.

Cardiac magnetic resonance (CMR) imaging provides complementary information on cardiac anatomy, function, and tissue characterization across multiple sequences and views. In this work, we investigate foundation model pretraining for 2D CMR and introduce CMRVision, a CMR-specific foundation model trained using DINOv3-style self-supervised learning on a multi-center, multi-sequence cohort of 36 million CMR images. We systematically evaluate architectural and training design choices for domain-specific pretraining. CMRVision is evaluated on two downstream tasks: multi-task segmentation across cine, late gadolinium enhancement (LGE), and mapping sequences, and cine view classification. Our experiments show that CMR-specific pretraining, smaller patch sizes, and patch-level objectives consistently improve downstream performance. Across a multi-task segmentation benchmark, CMRVision achieved the strongest overall performance, outperforming prior natural-image (NI), medical-image, supervised, and CMR foundation model baselines. Improvements were modest but consistent across structures and sequences, with Dice scores ranging from 0.940-0.967 for LV and 0.855-0.905 for myocardium, and reaching 0.929 for RV, 0.920 for LA, and 0.931 for RA. The largest gains were observed for myocardium segmentation in LGE and mapping images. In a zero-shot segmentation task on unseen LGE long-axis views, the model achieved an average Dice score of 0.692, demonstrating cross-view generalization. For cine view classification, CMRVision achieved the highest average accuracy (0.906), compared to prior methods reported in the literature. These results highlight the potential of CMRVision to support robust and generalizable cardiac MRI analysis across multiple sequences and views.

Two-stage vision pipelines often place an enhancement network before a task network, on the assumption that a cleaner input produces a better output. We evaluate this in a firefighter assistance pipeline, where a dehazer precedes an edge detector that renders smoke-filled rooms as structural outlines. Both were designed for a Raspberry Pi 4, at 355K and 23K parameters, and quantized to UINT8 via TensorFlow Lite. The float dehazer reaches 18.60 dB peak signal-to-noise ratio (PSNR) on held-out real smoke against 13.60 dB unprocessed and 17.08 dB for an AOD-Net trained on the same data, and the edge detector reaches an F-measure at optimal dataset scale (ODS) of 0.738, outperforming an optimized Canny's result of 0.692. Dehazing improves edge extraction under dense smoke but degrades it on clear and lightly hazed frames, where the dehazer discards more detail than the haze obscures. We therefore run the dehazer only when a dark channel haze estimate exceeds a threshold, a 10.1 ms test that lets the pipeline save 469.6 ms on the dehazing stage. Averaged over four haze levels, gating is more accurate than either fixed decision, at 0.675 mean ODS against 0.664 for always dehazing and 0.630 for never dehazing. It reduces the mean per-frame time on the Raspberry Pi from 569 ms to 321 ms, and on clear frames increases the frame rate fivefold, from 1.8 to 9 frames per second.

Remote photoplethysmography (rPPG) enables contactless physiological measurement from facial videos, yet its subtle pulse-related variations are easily affected by illumination variation, head motion, facial blur, and region-of-interest instability. Existing methods mainly suppress interference during feature learning, while whether the learned temporal features remain affected by interference and how to further suppress such interference before rPPG estimation are rarely examined. To address this limitation, we propose PhysVR, a vision-language model guided interference-aware temporal feature refinement framework for rPPG estimation. Specifically, a physiological backbone produces global temporal features and a coarse rPPG prediction, from which signal-derived physiological reliability evidence is constructed from local temporal characteristics. In parallel, a frozen vision-language model processes sampled facial frames under an interference-oriented prompt, and an evidence head extracts visual interference evidence from the VLM output. Temporal cross-attention integrates the physiological and visual evidence with the global temporal features to construct interference-aware temporal context. Guided by this context, a shared temporal correction unit performs general refinement, while four interference-specific experts selectively suppress different interference through adaptive routing. The refined temporal features are then used for final rPPG estimation. Extensive experiments on five public benchmarks demonstrate that PhysVR consistently outperforms representative methods under both intra-dataset and cross-dataset evaluation protocols.

UAV on-board vision systems are widely used for different activities, including monitoring in no-fly zones. In this case, the vision-equipped UAV streams a video to a ground server where an operator assists its activities. The latency of video transmission has a profound impact on the effectiveness of the operator assistance. However, most techniques available for video transmission still incur significant latency costs. In this paper, we propose a graph convolutional neural network-assisted (GCN-Assisted A2C) deep reinforcement learning (DRL) system model to find the optimal pixel-correlated area of a suspicious object. We combine the Lagrangian dual form with gradient descent to prevent lack of convergence and over- and under-penalization constraint violation during latency optimization. The proposed system model sends a sub-group pixel-correlated area of the frame from the UAV to the server rather than the transmission of the whole video frame. The proposed framework utilizes the GCN model to explore hidden representations of feature-correlated groups of pixels. Moreover, the GCN supervises the A2C model, which selects a subgroup to enhance transmission latency, thus supervising the training of UAV actions in A2C. Experimental results show that GCN-assisted A2C reduces video frame transmission latency together with false detection rate in UAV vision systems over other DRL and state-of-the-art models.

This work presents a visual odometry (VO) system that leverages image edge features. Edges are spatially expressive cues commonly present across diverse environments, offering rich textural and structural information. However, existing edge-based VO methods often fail to fully exploit this potential. To this end, we introduce a novel feature representation termed \textit{organized edges}, which transforms disjoint edge pixels into sequentialized clusters, enabling more effective retention and utilization of the underlying textural and structural information. Another nice property of this formulation is that organized edges can perform edge-level association across multiple frames, enabling the establishment of a co-visibility graph. To achieve precise and efficient pose estimation, we propose a range of particularly designed tracking and joint optimization methods based on the characteristics of organized edges. For tracking, we formulate edge-wise rather than pixel-wise residuals to achieve robust and accurate inter-frame registration. For joint optimization, we introduce a novel shape-preserving edge-fitting method and an organized edge-based Bundle Adjustment (BA) approach, which decomposes the traditional BA problem into fitting and registration to preserve the structural integrity. Based on these novel techniques, we develop a complete VO system that exclusively employs organized edge features, achieving efficient tracking and precise local mapping. Extensive experiments demonstrate its accuracy and robustness in indoor environments, outperforming or achieving comparable performance to state-of-the-art methods. The source code is publicly available at https://github.com/liumingrui814/ROEVO

Reliable semi-dense matching is essential for modern geometric vision systems. Designed under a coarse-to-fine paradigm, it achieves an optimal balance between performance and computational cost. However, existing methods often struggle to provide well-quantified uncertainties, where catastrophic coarse-assignment failures are ignored, leading to truncated error distributions and severely misjudged geometric estimations. In this paper, we propose a lightweight, post-hoc overall uncertainty estimation framework that introduces a two-component calibrated Laplace mixture model with only 9 learnable parameters. The objective is to explicitly capture both the sharp local refinement noise and the broader tail of coarse-assignment failures. We introduce the Coarse-success posterior Refit (CoRe) method, a geometric refitting module that utilizes the posterior probability of coarse-assignment success as soft correspondence weights. Extensive experiments show that our method consistently improves downstream geometric accuracy across various pretrained-only matchers and robust estimators with minimal computational overhead. Our code is available at https://github.com/khoavpt/Probabilistic-matching.

Vision-based navigation complements Global Navigation Satellite Systems, but certification demands integrity guarantees that account for faulty measurements. Previous work presented a probabilistic computer vision pipeline for runway-based pose estimation with fault detection inspired by Receiver Autonomous Integrity Monitoring. This work extends that framework by deriving protection levels, which provide probabilistic bounds on pose error that remain valid under undetected faults. We present an algorithm for computing protection levels for the nonlinear Perspective-$n$-Point problem applied to an aviation setting. The algorithm covers all six degrees of freedom of the aircraft pose (position and orientation) directly. We analyze the effect of measurement redundancy, pixel-level prediction uncertainty, and runway distance on the resulting protection levels. To make the results tangible, we demonstrate tradeoffs in the protection levels on an illustrative runway example.

Estimating volumetric mechanical properties, including Young's modulus, Poisson's ratio, and density at each voxel, is intrinsically ambiguous from vision alone, as visually similar objects may have substantially different material compositions and physical behavior. Existing approaches predict these properties independently across voxels, overlooking the piecewise-constant material structure of real objects and producing noisy or inconsistent estimates for voxels that share the same material, while lacking an explicit mechanism to resolve visual ambiguity. We introduce ViWi (Vision Meets WiFi), an object-centric framework for volumetric mechanical-property estimation. ViWi represents each object using a compact set of material slots that aggregate evidence from voxels with a shared material identity and produce coherent slot-level property predictions. To complement visual appearance, ViWi incorporates a compact RF descriptor generated through WiFi-band electromagnetic simulation using permittivity and conductivity. The RF descriptor conditions the material slots with global composition cues that may be unavailable from images, while visual features preserve voxel-level spatial localization. Across volumetric mechanical-property and mass-estimation benchmarks, ViWi improves over the prior state of the art on four of six per-voxel metrics, while its vision-only variant improves all mass-estimation metrics. These results demonstrate that combining object-centric material structure with complementary RF evidence enables more accurate and physically coherent volumetric property estimation beyond what is possible from visual appearance alone.

Low-resolution infrared (IR) array sensors represent an interesting solution for privacy-preserving human sensing in embedded systems. In this letter, we describe a smart multi-pixel IR sensor integrating a 16$\times$16 thermal MOSFET (TMOS) array and a RISC-V microcontroller extended with low-precision SIMD instructions, capable of on-device learning and continual adaptation for pose and gesture recognition tasks under tight memory and power constraints ($<$32kB on-chip memory, $\approx$1.5mW). To avoid the memory overheads of backpropagation and replay buffers, we adopt a prototype-based Nearest Class Mean (NCM) classifier in which a simple Convolutional Neural Network (CNN) encoder is trained and quantized offline, while class prototypes are stored and updated on the device in streaming mode. With experiments on two datasets, we show that this approach yields accuracy on par with a conventional classifier, with negligible latency overheads in both the classification and the prototype update ($<$0.29% considering both phases), effectively enabling online adaptation of the perception framework.

Significance. Accurate intraoperative depth perception is important for autonomous and semi-autonomous robotic laparoscopic surgery. Conventional fringe projection profilometry can achieve millimeter-scale accuracy but often requires multi-shot acquisition, digital-micromirror-device projection, and projector-camera synchronization, complicating integration into compact laparoscopic systems. Aim. To develop a synchronization-free, single-shot depth-sensing platform using a passive LED-illuminated binary mask and a VQ-VAE prior with a custom U-Net depth head. Approach. A compact projection module was coupled to one channel of a dual-channel laparoscope, while the second channel imaged the fringe-illuminated target. A Zivid 3D camera acquired reference depth for 722 paired phantom images. Zivid depth maps were reprojected into the SSLE image frame for supervised training and evaluation. The VQ-VAE encoded each input into a discrete latent representation, and a latent-space U-Net predicted depth without a separate mask-prediction branch. Results. Using a fixed train/validation/test split, the proposed model achieved an MAE of 3.70 mm, AbsRel of 0.0326, delta=1.1 accuracy of 0.962, and delta=1.1^2 accuracy of 0.970. It achieved lower MAE than the dual U-Net MaskNet + DepthNet baseline and outperformed off-the-shelf monocular depth models in MAE, AbsRel, and threshold accuracy. The pipeline operated at 26.0 Hz over 301 consecutive frames on an NVIDIA A100 GPU. Conclusions. The LED-illuminated binary-pattern platform with latent-space depth reconstruction enables synchronization-free, video-rate endoscopic depth estimation. Results demonstrate Zivid-referenced phantom reconstruction without an explicit segmentation stage, while emphasizing the importance of dataset size and SSLE-Zivid calibration accuracy.

Vision-language models (VLMs) are increasingly deployed as reasoning agents in real-world visual assessment pipelines, yet their spatial grounding remains unreliable for fine-grained, visually ambiguous targets. We study this gap in the context of automated vehicle damage assessment, where fine-grained defects such as scratches and hairline cracks occupy few pixels, produce weak gradient signal, and are easily confused with reflections and surface texture. We show that a state-of-the-art VLM (Qwen-VL) achieves strong semantic classification accuracy (87.3%) on this task but is systematically ungrounded at the spatial level: it hallucinates damage in reflective regions, misses elongated scratches entirely, and produces spatially inconsistent outputs when prompted for localization. We propose TinyDamage, a hybrid architecture that delegates spatial grounding to a dedicated multi-task segmentation model while reserving the VLM for semantic reasoning and report generation. On the segmentation side, we find that the choice of loss function has an outsized and underexplored effect on tiny-object grounding: focal loss, widely used for class imbalance, collapses tiny-damage detection to zero, while a supervised contrastive objective measurably improves damage/background separability. We integrate the segmentation model into a 7-node LangGraph agent pipeline that grounds every VLM generation step in the segmentation output, and show that this grounding reduces the report hallucination rate from 92% (text-only) and 78% (image-only) to 31% in a controlled evaluation on 100 human-verified reports. We introduce DET_l, a permissive per-category detection metric for evaluating tiny-object grounding under class imbalance, and report latency and reliability characteristics of the deployed pipeline.

Multimodal large language models (MLLMs) have advanced visual understanding and reasoning, yet their static parametric knowledge limits their ability to address knowledge-intensive and dynamically evolving open-world problems. To move beyond this limitation, multimodal deep search has emerged as a key direction for open-world information access, evolving from single-turn factual retrieval toward long-horizon, multi-turn search guided by visual evidence. However, existing methods typically confine vision to the input or answer stage, overlooking its role in intermediate reasoning, and lack designs tailored to long-horizon interaction. Consequently, visual evidence rarely drives continued retrieval, constraining both interaction depth and reasoning span. To address these limitations, we propose DeepVoyager-VL, a long-horizon multimodal deep-search framework for vision-in-the-loop search. Specifically, we construct a multimodal event graph to drive data synthesis, yielding problems with intermediate visual dependencies and long reasoning chains. We then design an agent framework for active visual acquisition and on-demand image loading. Finally, we fine-tune models on the synthesized data without reinforcement learning. Extensive experiments across ten multimodal search benchmarks demonstrate the effectiveness of our method.

We present VetClaw, an edge-cloud multimodal agentic system for early veterinary disease screening. VetClaw uses a camera module as an edge sensing device and sends captured images, together with optional symptom descriptions, to a server-hosted vision-language model for zero-shot disease classification. The system separates agent interaction from workflow orchestration: OpenClaw provides scheduling, tool access, user interaction, and notification services on the edge device, while LangGraph manages the stateful screening workflow, including input validation, image transmission, model invocation, safety checks, conditional routing, failure handling, and structured logging. This design moves beyond static image classification by enabling the system to collect visual evidence, invoke external models, apply deterministic safety rules, and generate diagnostic-support alerts. Results show that image-only VLM prediction remains limited, whereas symptom-guided and multimodal inputs improve zero-shot classification performance. Thus, VetClaw transforms a static prediction model into a coordinated, safety-aware system that can use tools, manage workflows, handle failures, and escalate uncertain cases.

Autonomous vehicles (AVs) depend on Global Navigation Satellite Systems (GNSS) for localization and navigation, making them vulnerable to spoofing attacks that can covertly redirect vehicles or induce unsafe maneuvers. In this paper, we develop the first Vision-Language Model (VLM)-based framework for GNSS spoofing detection for autonomous vehicles by fusing front-camera visual data with in-vehicle sensor readings (e.g., speed, acceleration, yaw rate) against GNSS-derived maneuvers. Our approach introduces a three-stage fine-tuning process that first grounds visual cues, and then calibrates sensor data within a shared semantic space to detect discrepancies between predicted and GNSS-derived maneuvers across three attack scenarios. We also generated an independent real-world dataset by driving an instrumented vehicle on public roads in Tuscaloosa, Alabama, equipped with time-synchronized GNSS, IMU, and camera logs to validate cross-regional generalization of our fine-tuned model on unseen data from training data. On this dataset, we then generated intelligent spoofing attacks, including trajectory mirroring with road-network snapping for wrong-turn attacks, position freezing for overshoot scenarios, and drift generation for stop attacks. On this validation dataset, the zero-shot VLMs baseline F1-score ranges from 23% to 32%, whereas our fine-tuned model achieves an F1-score ranging from 94% to 95%. Results show that our VLM-based approach correctly classified every wrong-turn and stop attacks, and attains 88%-93% accuracy for overshoot attacks. Furthermore, we introduce an adaptive inference policy that reduces VLM invocations to 14% (~86% computational reduction) and yields 65ms-73ms per 4s window. These results point to a practical, on-road layer of defense that complements signal-level integrity checks with the use of VLMs.

Conventional frame-based imaging for active stereo systems has encountered major challenges in fast-motion scenarios. However, how to design a novel paradigm for ultrafast depth sensing remains an open issue. In this paper, we propose a novel problem setting, namely active event-based stereo vision, which attempts to integrate binocular event cameras and an infrared 2D pattern projector for high-speed dense depth sensing. Technically, we first build a stereo camera prototype system and present a real-world dataset with over 21.5k spatiotemporal synchronized labels at 15 Hz, while also establishing a realistic synthetic dataset with stereo event streams and 23.8k synchronized labels at 20 Hz. Then, we propose ActiveEventNet+, a lightweight yet effective event-based stereo matching neural network that learns to generate high-quality dense disparity maps from stereo event streams with low latency. Our ActiveEventNet+ mainly involves three innovations: incorporating lightweight blocks into event-based stereo matching frameworks, designing a novel cost volume with dynamic interactions between stereo pairs, and presenting an effective temporal consistency architecture to fully use rich temporal cues in event streams. The results show that our ActiveEventNet+ outperforms state-of-the-art methods while significantly reducing computational complexity. Our solution offers superior depth sensing performance compared to conventional frame-based stereo cameras in high-speed scenes. In particular, the lightweight ActiveEventNet enables the prototype system to achieve real-time processing at speeds up to 150 FPS. We believe that this novel active event-based stereo vision paradigm can provide new insights into the design of future high-speed depth sensing camera systems. Our dataset and code can be available at https://github.com/jianing-li/active_event_based_stereo.

Virtual reality (VR) headsets (e.g., Meta Quest, Apple Vision Pro) provide a seamless user experience due to their fast, frictionless interaction with the physical world in a simulated environment. User authentication relies on biometric cues such as iris in such headsets. However, traditional iris recognition protocols may not be adequate in cases of unconstrained acquisition, which is typical of VR-based data. In this work, we examine three crucial aspects: (1) evaluating ISO/IEC 29794-6 iris quality metrics on VRBiom dataset and analyzing their limitations, (2) addressing data-specific challenges such as off-axis gaze, non-uniform illumination, and specular reflection using generative models, and (3) performing unimodal (iris, periocular) recognition and multimodal score-level fusion (iris + periocular). We observe that some metrics (e.g., margin adequacy) fail on VR-acquired data; whereas, image adjustments primarily benefit periocular recognition, and multimodal fusion lowers EER by ~11% over unimodal iris recognition performance. We will release the evaluation scripts upon acceptance for reproducibility.

In search and rescue operations, there is a period known as the "golden time" during which the probability of finding the target alive is highest. The objective of this work is to propose a new search algorithm for unmanned aerial vehicles (UAVs) with a focus on improving the detection probability and execution time. We approach this problem by first modeling target dynamics as a Markov process and the detection likelihood as a function of image quality and the observer's vision. We then employ Bayesian theory to derive a fitness function representing the probability distribution of the target's location over the search area. Finally, we introduce a new algorithm named polar coordinate-based differential evolution (PDE) to generate a UAV search path that maximizes this fitness function. The PDE algorithm utilizes polar coordinates to incorporate kinematic constraints and maneuver properties of the UAV, allowing for better exploration of the solution space. A series of simulations and comparative analyses have been conducted to evaluate the performance of the proposed algorithm. Experiments involving a real UAV have also been conducted. Results demonstrate that the PDE algorithm outperforms state-of-the-art algorithms in terms of detection probability and execution time across diverse search scenarios while remaining practical for real-world applications. The source code of the algorithm is available at https://github.com/thuhangkhuat/PDE_target_search.

Silicon-photonic (SiPh) accelerators have emerged as a promising platform for Vision Transformer (ViT) inference by performing matrix multiplications on microring-resonator (MRR) banks with high throughput and energy efficiency. Extending these platforms to support on-chip fine-tuning remains challenging because backpropagation requires large activation storage, frequent weight write-back to MRRs, and tolerance to device-level noise. We present Opto-ViT-v2, the first framework for parameter-efficient fine-tuning (PEFT) on a near-sensor SiPh ViT accelerator. Our tensorized low-rank decomposition separates pretrained optical weights from a small set of trainable electronic factors (as few as 8K parameters for ViT-Base), greatly reducing activation storage and weight updates while enabling practical on-chip training. We further introduce a gradient-accumulated sparse classifier that freezes low-importance weights through one-shot top-k gradient masking, reducing classifier training cost by about 40 percent. We also develop the first system-level noise model for photonic on-chip training, capturing the effects of MRR crosstalk, thermal drift, and laser amplitude noise during both forward and backward propagation. Calibrated using measurements from more than 200 fabricated MRR devices, the model shows that low-rank factor updates are more robust than full fine-tuning and conventional layer-wise low-rank adaptation under identical noise conditions. Experiments on VTAB-1K (19 tasks) and FGVC few-shot benchmarks demonstrate that Opto-ViT-v2 recovers within 0.3 to 0.8 percent of clean software accuracy under measured photonic noise while achieving more than 100 KFPS/W, enabling practical on-chip domain adaptation for photonic edge vision systems.

In this manuscript we release two datasets for visual sensing of tomato plants grown in commercial-like settings and acquired using a robot. The first is BUTom21 which consists of still images and manual annotations. The second is BUTom-ST21 which consists of video-based data and semi-automated annotations through AI-based methods, referred to as pseudo-labels. In both cases, we provide pixel-level labels for the ripeness of the fruit. The aim is to provide the research community a challenging set of real-world imagery to explore methods to sense and estimate the state of tomato plants and their fruit, which is an important horticultural crop. Importantly, the spatial-temporal dataset provides individual fruit count and ripeness information enabling researchers to push the boundaries of field-based phenotyping.

A surveillance camera is an image sensor whose silent physical degradation invalidates every downstream consumer of its data. In-situ integrity alarms for such vision sensors require low false-alarm rates, bounded computation, and diagnosable behavior under nuisance illumination changes. This paper studies a deliberately narrow streaming integrity monitor for two low-cost sensor-fault signatures: texture-collapsing lens occlusion and abrupt photometric scene transition. The detector compares sampled luminance and local-gradient statistics with a clean-only sliding reference, applies coarse-grid structured-light rejection and mode/rapid-brightness suppression, and emits at most one notification per tamper episode. We formalize the decision predicates and derive a consistency rule for when rapid-brightness suppression makes the scene-transition path unreachable. On 320 in-scope controlled sequences, the default state machine attains 0.800 F1 and 0.822 balanced accuracy (significantly better paired correctness than the strongest baseline, though the F1 margin is not statistically resolved); on a magnitude-swept public audit it attains the highest partial AUC under a 5% false-alarm budget, and a separate extended-stress FPR-constrained sweep reaches 0.925 recall at 0.025 false-positive rate. Public Xiph, Bremen IoT, and UHCTD diagnostics show the fixed predicates preserve low false alarms while recall concentrates inside the declared envelope (UHCTD in-scope covered recall 0.667 versus 0.016 out of scope), and a 9.09-camera-hour verified-negative public audit records zero false alarms. The method is best interpreted as an auditable sensor-health subsystem rather than a universal camera-tamper classifier.

Reliable visual data association is fundamental to visual SLAM (V-SLAM), as it directly determines the quality of the camera pose estimation and map consistency. However, the handcrafted descriptors used by most mature real-time systems degrade under illumination and viewpoint changes, while learning-based front-ends that address this weakness typically require replacing the extraction-and-matching pipeline and introduce substantial computational overhead. Descriptor enhancement offers a compromise by refining existing descriptors within their original format, yet current methods rely on simplified attention mechanisms whose limited contextual modeling constrains the achievable matching quality. To resolve this trade-off between contextual expressiveness and efficiency, we propose Desc++, a lightweight enhancement module that jointly encodes descriptor representations and keypoint geometry and aggregates spatial context through a hybrid architecture that combines order-agnostic global attention with geometry-aware sequential modeling in linear time. The enhanced descriptors retain their original dimensionality and matching interface, enabling integration into deployed V-SLAM systems without modifying the pipeline. Experiments across descriptor matching, correspondence analysis, and system-level benchmarks with four different V-SLAM systems demonstrate that Desc++ improves matching accuracy over the state-of-the-art enhancement method, translates these gains into more accurate and stable trajectory estimation, and achieves a favorable balance between accuracy and efficiency for practical integration into existing real-time V-SLAM pipelines.

Unmanned Aerial Vehicle (UAV) videos are widely used in traffic monitoring, urban management, and emergency rescue. However, existing UAV video perception mainly relies on box-level localization and trajectory association under predefined categories, making it difficult to simultaneously support flexible queries and fine-grained instance-level dynamic understanding in open scenarios. To this end, we introduce a new task, UAV Open-Vocabulary Video Instance Segmentation (UAV-OVVIS), which discovers targets in UAV videos according to open-vocabulary queries and outputs instance-level segmentation trajectories with globally consistent identities. Considering the scarcity of instance-level annotations in UAV scenarios, we propose AeroTrack, a training-free unified framework. AeroTrack centers on periodic open-vocabulary detection, short-segment mask propagation, and cross-segment identity unification, reusing existing visual foundation models to enable UAV-OVVIS. Based on this framework, we instantiate five AeroTrack variants and construct AeroVIS, an evaluation benchmark for UAV-OVVIS containing 9 UAV object categories and 8,279 trajectories. Experiments show that AeroTrack substantially outperforms existing general video instance segmentation methods in UAV scenarios and demonstrates strong open-vocabulary robustness and generalization. To support future research, we release AeroTrack and AeroVIS as a unified framework and benchmark for UAV-OVVIS.

Dynamic environments remain a fundamental challenge for visual SLAM, where unreliable observations from moving objects and rapid motion degrade state estimation accuracy. Although event cameras preserve fine-grained spatio-temporal information, most existing event-based SLAM frameworks still assume static scenes and lack approaches to estimate the reliability of features. To this end, we propose PLED-VINS, a monocular event camera-based visual-inertial SLAM framework that enables robust state estimation in dynamic environments. We propose an entropy-recency score map to characterize the temporal reliability of both point and line features based on event temporal statistics. Concurrently, geometric reliability is estimated via a unified point-line robust bundle adjustment. Building upon these, we design an adaptive weighting strategy that fuses temporal and geometric reliability, including motion-conditioned reliability modeling for line features, to suppress unreliable observations. Experimental results demonstrate that PLED-VINS improves state estimation on the evaluated dynamic sequences with moving objects.

In this paper, we present the first (to the best of our knowledge) demonstration of a low-power MCU-based edge device for Automatic License Plate Recognition (ALPR). The design leverages on a 9-core RISC-V processor, GAP8, coupled with a QVGA ultra-low-power greyscale imager. The proposed visual processing pipeline uses a multi-model inference approach based on SSDlite-MobilenetV2 for license plate detection and LPRNet for optical character recognition, reaching a 38.9% mAP score for the first task and a recognition rate of >99.13% for the latter on public datasets. On real-world data, the pipeline recognizes registration numbers when the size of LP crops is as small as 30x5 pixels. Thanks to the applied compression and optimization strategies, the multi-model inference (687 MMAC) achieves a throughput of 1.09 FPS at a power cost of 117 mW when running on GAP8. Our solution is the first MCU-class device embedding such a level of network complexity, resulting to be 73x more energy-efficient w.r.t. precedent mobile-class ALPR system featuring a Raspberry Pi3. The proposed design does not resort to any hardwired acceleration engines, thus retaining full flexibility for future algorithmic improvements.

Fast and reliable motion detection is essential for machine vision and autonomous systems operating in dynamic environments. This work integrates emerging event-based sensing with biologically structured neural computation to establish an efficient computational paradigm for visual motion detection. The proposed framework is built upon a recently developed fly-inspired neural network that emulates motion-processing circuits in the optic lobe. Owing to its feed-forward and training-free architecture, the neural model requires only a small number of interpretable parameters and is well suited for real-time implementation. Event cameras provide low-latency, low-power, and high-dynamic-range visual sensing by asynchronously transmitting brightness-change events. However, their performance can be degraded by event noise, including temporal noise and junction-leakage-induced activity, particularly under low-light conditions. Moreover, effective integration between event-based visual representations and biologically inspired neural processing remains under-explored. To address these challenges, we propose an event-driven computational framework that combines time-surface encoding for front-end event representation with a fly optic-lobe-inspired neural network for foreground motion-direction estimation. A bottom-up attention mechanism is further incorporated to suppress background motion and enhance the saliency of foreground targets. The proposed method is evaluated via real-world datasets of ground-vehicle detection and compared with a baseline frame-based model and an optimization-based approach. Experimental results demonstrate that the framework effectively combines the temporal advantages of event-driven vision with the efficiency and interpretability of bio-inspired neural processing.

Over 285 million people worldwide live with a visual impairment, for whom everyday tasks such as avoiding obstacles, locating personal belongings, recognizing familiar faces, or handling cash remain persistent obstacles to personal autonomy. Existing assistive applications are typically limited to recognizing predefined categories, depend heavily on cloud connectivity, or require dedicated hardware. We present VisionAId, an Android application that turns a commodity smartphone into a real-time visual assistant. The system integrates six on-device deep learning models (metric monocular depth estimation, instance segmentation, visual and facial embeddings, face detection, and a custom banknote detector) running entirely through ONNX Runtime, with an optional cloud large language model (Google Gemini Flash) used only for narrative scene description and automatic object labeling. A distinctive contribution is a few-shot pipeline for personal objects: the user photographs an object from several angles, and the system later locates that specific instance in the environment, guiding the user toward it with augmented-reality markers, spatial audio, and distance-proportional haptics. All feedback is multimodal (Romanian speech synthesis, voice commands, vibration). On a reference device (Samsung Galaxy S21 Ultra), INT8 quantization reduces depth latency from ~1200 ms to ~491 ms, the custom banknote detector reaches an mAP@50 of 0.986, and metric depth is calibrated to below 1 cm of error within 3 m.

Deep-learning features excel in visual matching, yet their practical value in tightly coupled visual-inertial SLAM (VI-SLAM) remains insufficiently characterized. We present DL-VINS-Factory, a unified framework that integrates learned feature extractors (ALIKED, RaCo, SuperPoint, XFeat) with either Lucas--Kanade (LK) optical-flow tracking or LightGlue (LG) descriptor matching. All front-ends share a sliding-window Ceres back-end, with optional AnyLoc DINOv2-VLAD loop closure, and 4-DoF pose-graph optimization. We benchmark the system across the four datasets covering indoor, unstructured outdoor, aggressive-motion, and visually degraded conditions. Results show that learned front-ends are viable for real-time embedded VI-SLAM, but are not universally superior to classical tracking. Relative to the corresponding GFTT+LK baseline, ALIKED+LG reduces EuRoC ATE by $5\%$ in monocular odometry and by $7\%$ in stereo with loop-closure. On NTU-VIRAL, where aggressive aerial motion increases inter-frame viewpoint change, ALIKED+LG stereo reduces loop-closed ATE by $12\%$. In Botanic Garden dataset, optical-flow tracking remains preferable, but learned keypoints still improve over the baseline GFTT, in which SuperPoint+LK reduces grayscale camera ATE by $29\%$, while RaCo+LK reduces RGB camera ATE by $38\%$. On SubT-MRS, learned front-ends display varying degree of improvement based on individual cases. With TensorRT acceleration on a Jetson AGX Orin, all valid configurations run in real time between $29$--$47$ FPS in monocular mode and $18$--$33$ FPS in stereo mode for the EuRoC and NTU-VIRAL datasets. AnyLoc further confirms roughly $2$--$7\times$ more valid loops than BRIEF+DBoW2. The implementation is open-sourced at https://github.com/limshoonkit/DL-VINS-Factory-ROS2/.

Vision-Language-Action (VLA) models have emerged as a promising paradigm for end-to-end autonomous driving. However, existing VLAs' training relies heavily on text-centric visual question answering and chain-of-thought reasoning data, which emphasizes linguistic reasoning rather than action-grounded planning. As a result, the learned representations capture semantic knowledge but lack spatial dependencies crucial for reliable trajectory prediction. We propose DriveTeach-VLA, a framework that explicitly teaches VLAs what to see and where to look. Driving-aware Vision Distillation (DVD) injects driving-specific perceptual priors into the vision encoder, while 2D Trajectory-Guided Prompts (2D-TGP) provide spatial conditioning aligned with feasible driving trajectories. Together, they form a vision-guided learning pipeline: what to see (DVD pretraining) - where to look (TGP-guided SFT) - how to act (TGP-guided GRPO). DriveTeach-VLA achieves the state-of-the-art performance on NAVSIM and nuScenes. Our code is available at: https://github.com/ShivaTeam/DriveTeach-VLA.

Standard stereo VIO focuses exclusively on the benefit of metric scale via single-spectrum baselines, often overlooking the risks of spectral redundancy. This structural limitation leads to correlated failures, where both sensors simultaneously fail in degraded environments that affect their shared spectrum. Leveraging a cross-spectral system presents a complementary solution to this issue, yet the significant appearance gap between modalities renders standard matching ineffective. Existing deep learning-based matchers, while effective, introduce inference latencies that violate real-time constraints. To bridge this gap, we present an asynchronous real-time cross-spectral visual-thermal-inertial (VTI) system that temporally decouples high-latency deep matching from high-rate state estimation. Our architecture incorporates a spectral-aware weighting scheme that dynamically balances modality reliance based on photometric entropy and thermal noise, ensuring robustness against both abrupt lighting changes and thermal artifacts. Furthermore, we introduce a seamless handling mechanism for thermal Non-uniformity Correction (NUC) to maintain tracking continuity. Extensive experiments across diverse scenarios confirm that our system overcomes spectral redundancy, yielding superior accuracy in nominal daylight while ensuring robustness in visually degraded environments. We will open source our code and data: https://github.com/seungsang07/cross-spectral-stereo-inertial-odometry

Automated image recognition is increasingly used to scale ecological monitoring beyond manual annotation, yet ecologists lack evidence-based guidance on how much labelling effort reliable deployment at new sites requires. We present a decision framework quantifying the trade-off between labelling effort and recognition accuracy when transferring vision systems across marine habitats. The benchmark spans five datasets, three oceans, and three taxonomic groups (fish, corals, invertebrates), from tropical reefs in the Great Barrier Reef and French Polynesia to a temperate Danish fjord. We evaluated four recognition models (DINOv2, CLIP, ResNet-50, EfficientNet-B4) under four adaptation strategies (linear probing, LoRA, Visual Prompt Tuning, full fine-tuning) across three protocols: within-habitat transfer across 20 reef sites (240 runs), cross-dataset geographic transfer along a difficulty gradient (40 runs), and few-shot adaptation curves with 0-100 labelled samples per class (648 runs). Frozen self-supervised foundation features (DINOv2 + linear classifier, 1,538 trainable parameters) generalised to unseen reef sites at least as well as fully fine-tuned convolutional baselines four orders of magnitude larger; they learned species-diagnostic, habitat-invariant representations, whereas baselines encoded habitat-specific shortcuts that fail at new sites. As few as 10-20 labelled images per species sufficed to deploy reliable recognition at a new site, cutting annotation effort by roughly an order of magnitude. Solution. Programmes expanding to new sites can deploy reliable recognition by pairing a frozen, open foundation model (DINOv2) with a simple linear classifier and annotating only 10-20 images per species - roughly 1-4 hours per site. The framework lets programmes budget labelling effort against expected accuracy across sites, ecosystems, and platforms.

Abdominal ultrasound is indispensable for rapid, noninvasive trauma triage. However, interpreting the subtle dynamic cues embedded in continuous scanning is time-intensive and operator-dependent. Parameter-Efficient Image-to-Video Transfer Learning (PEIVTL), which efficiently adapts pre-trained image models to the video domain, notably through visual-textual alignment, offers a promising paradigm for ultrasound video analysis. Nevertheless, substantial spatiotemporal and semantic variations arising from physician-dependent scanning practices continue to limit the effectiveness and generalizability of this framework. We propose TRUST, a scan-aware PEIVTL framework that explicitly models fine-grained spatiotemporal variations to enable reliable ultrasound video understanding. First, we introduce a Cross-Frequency Collaborative Adapter (CFCA) that establishes mutual constraints between low- and high-frequency components, enhancing discriminative spatial feature extraction under heavy speckle corruption. Second, we design a Multi-Granularity Motion-Aware (MGMA) module that integrates local temporal convolutions with motion-prior-guided global self-attention, jointly capturing stable intra-view patterns and abrupt inter-view transitions to characterize complex scanning dynamics. Third, a Visual Query Semantic Aggregation (VQSA) module dynamically generates text prototypes conditioned on visual features, enabling adaptive visual-textual alignment robust to intra-class variability under diverse scanning conditions. Experiments on in-house ultrasound trauma datasets demonstrate that TRUST outperforms state-of-the-art methods by 9.63% with superior computational efficiency.

Deep neural networks (DNNs) have shown outstanding performance in visual recognition tasks within vision sensor networks; however, they are still vulnerable to adversarial manipulations and imperceptible perturbations that can lead to erroneous predictions. To address that, this paper presents AEGIS, a semantic aware and uncertainty guided adversarial detection framework designed for robust image classification in vision sensors pipelines. At its core, a SemantiGAN module functions as a multi class semantic discriminator, identifying and filtering visually inconsistent adversarial inputs before they propagate further in the pipeline. For inputs that pass this stage, a stochastic augmentation process generates test time variations, from which handcrafted instability metrics FlipScore, Prediction Inconsistency, Layerwise Cosine Similarity (early and mid layers), and Entropy are computed. These features are aggregated into a compact five dimensional vector and processed by an Evidential Deep Learning (EDL) classifier, which models output evidence using a Dirichlet distribution to yield both class predictions and calibrated uncertainty estimates. Evaluations on the Tiny ImageNet dataset across six categories clean, FGSM, PGD, patch based, functional, and geometric attacks demonstrate the effectiveness of AEGIS. The proposed framework achieves an AUROC of 92.1%, an AUPRC of 90.2%, and an accuracy of 90.7%, outperforming conventional softmax-based detectors in terms of detection performance, robustness, interpretability, and uncertainty calibration.

Tightly coupled LiDAR-visual-inertial odometry (LIVO) fuses precise geometric depth with complementary visual measurements, yet its exteroceptive sensors face independent failure modes: LiDAR degenerates when scan geometry is under-constrained, while visual measurements degrade under adverse illumination or texture absence. Existing countermeasures, including binary degeneracy detection, covariance inflation, and scene-level quality gating, operate at the modality level and leave the direction-dependent structure of the joint information matrix unaddressed. Consequently, visual residuals enter pose directions where LiDAR is well-constrained, while in deficient directions visual compensation disperses across the full state space rather than concentrating where needed. We propose SA-LIVO, a LiDAR-inertial-visual odometry system addressing these limitations through direction-selective fusion and information-efficient processing. The Subspace-Aware Information Fusion (SAIF) framework eigendecomposes the joint LiDAR-visual information matrix and applies a linear-clamp soft gate per eigendirection, attenuating degenerate directions while preserving observable ones at full strength. LiDAR and visual residuals are then jointly optimized in one InEKF loop at a shared linearization point. Since visual information contributes only where LiDAR is deficient, photometric Jacobians are assembled once before the loop and reused across iterations, avoiding the per-iteration cost of conventional iterated filters. Experiments on 29 sequences from three benchmarks (HILTI'22, New College, Oxford Spires) and concurrent-degradation scenarios show accuracy competitive with the strongest baselines and bounded drift where competing systems diverge. SA-LIVO averages 12.3 ms per frame on a laptop CPU and 26.8 ms on an embedded ARM board without GPU, with 3.6-6.3x lower peak memory. The code will be open-sourced.

This paper presents a modular training-free framework for zero-shot, language-guided robotic manipulation in semi-structured environments. The architecture bridges the gap between high-level reasoning and low-level kinematics by decomposing the vision-action pipeline into three stages: visual perception, semantic interpretation, and task execution. To overcome the spatial ambiguity and semantic hallucinations inherent in standard Vision-Language Models (VLMs), the perception module employs FastSAM and Set-of-Mark (SoM) prompting to dynamically generate grounded, alphanumeric visual anchors. The same foundation model then operates purely as a Large Language Model (LLM) to act as a semantic router, translating unconstrained human directives into verifiable, reconfigurable configurations. Finally, these configurations are dynamically parsed by a Task Orchestrator into MoveIt Task Constructor (MTC) to generate collision-free trajectories. The framework is evaluated across two zero-shot experimental setups: unconstrained open-world sequential manipulation and dense relational spatial reasoning, achieving a 62% end-to-end task success rate across both scenarios, demonstrating its capacity to reliably execute complex physical actions without domain-specific training or manual coordinate programming.

LiDAR (Light Detection and Ranging) sensors capture the surrounding environment as dense 3D point clouds by measuring the time-of-flight of emitted laser pulses, making them foundational across autonomous vehicles, robotics, and large-scale mapping. PCAP (Packet Capture) files from these sensors are the starting point of most 3D perception pipelines, yet internal packet structures, UDP (User Datagram Protocol) port conventions and encoding schemes differ enough across manufacturers that no single tool reads them all. Ouster, Velodyne, Hesai, and Livox each require their own SDK (Software Development Kit), their own environment setup, and their own conversion workflow. Supporting all four means maintaining four disconnected pipelines with no shared infrastructure. The pipeline described here takes a raw PCAP as input and handles vendor identification automatically, scoring six independent file characteristics through a weighted multi-signal approach to determine the source sensor. C++ SDKs handle Ouster and Velodyne, while Hesai and Livox rely on Python-based dpkt parsing where no open source SDK exists. From there, a single command writes output to any of five industry-standard formats. We tested on real outdoor captures. Ouster peaks at 2.08M points per second, Velodyne at 1.47M, both running through native C++ packet decoding. Hesai and Livox land at 110K and 150K respectively, where Python-layer parsing introduces overhead that compounds under sustained load. The 8-10x gap held consistently across runs. Tested on a consumer-grade i3 with 8GB RAM, no vendor configuration required

Scaling wildlife monitoring for real-world conservation deployments requires automated analysis of smart sensors that operate under severe annotation scarcity. We propose leveraging expert knowledge of species activity patterns as an annotation-free validation signal for multimodal monitoring pipelines. We operationalize agreement as the alignment of independently derived hourly activity curves both with each other and with published behavioral priors-a three-way convergence that rules out shared-data confounds and dataset-internal correlation as alternative explanations. Our vision pipeline combines zero-shot species detection via BioCLIP 2, sliced inference to handle deployment-constrained camera positioning, and geometry-based geographic localization from camera trap imagery. Our acoustic pipeline detects species vocalizations via a fine-tuned classifier. We validate the pipeline on a breeding herd of Milu deer and demonstrate that both modalities independently recover activity patterns consistent with known deer behavioral ecology with minimal manual annotation. The framework applies to species detectable in both visual and acoustic modalities for which behavioral priors are documented in the literature, suggesting a practical path toward self-validating wildlife-monitoring pipelines at conservation scale.

Autonomous UAV operations on ships require reliable vision-based relative pose estimation, yet at-sea validation is costly, weather-dependent, and risky. This paper presents a hardware-validated vision-in-the-loop framework that enables fully autonomous indoor flight while emulating photorealistic maritime environments. Rendered maritime views are processed onboard by a deep transformer-based monocular pose estimator. Delayed vision measurements are fused with high-rate IMU data using a delayed Kalman filter to provide consistent state estimates for geometric control. The system captures critical embedded effects, including perception latency, asynchronous updates, and computational constraints, that are absent in pure simulation. Autonomous takeoff, trajectory tracking, and landing experiments demonstrate stable closed-loop flight. The results establish a safe and hardware-realistic intermediate stage for developing maritime UAV autonomy prior to shipboard deployment.

Large Vision Language Models (VLMs) excel at visual question answering and semantic grounding, but their capacity for autonomous logical reasoning remains underexplored. Existing anomaly benchmarks emphasize visual errors or direct prompting rather than the physical and social common sense needed for open-world deployment. To address this, we introduce LAD-bench, a benchmark of more than 1,000 curated synthetic images with logical anomalies across four domains: Residential, Urban, Collaborative, and Nature. We further propose a Tiered Prompting Protocol based on progressive disclosure, which measures how much explicit assistance a model needs to localize and reason about a logical fault. Evaluating leading foundation models reveals substantial weaknesses: even the best achieves only 70.11% overall accuracy, showing that implicit logical fault detection remains unsolved. Crucially, models often fail to identify anomalies even after receiving explicit hints in deeper tiers. By surfacing these limitations in sequential multimodal reasoning, LAD-Bench offers a rigorous framework for advancing the safety, reliability, and cognitive alignment of autonomous visual systems. Dataset and Code: https://huggingface.co/datasets/SahasraK/LADBench

This paper presents a hybrid model-based and model-free framework for active multi-view target recognition using forward-looking sonar. A convolutional neural network (CNN) provides data-driven observation likelihoods, while Radon-based orientation estimation enables viewpoint-aware sensing without requiring angle annotations. During training, an information-gain-based reward guides a Proximal Policy Optimization (PPO) agent to learn a belief-aware viewpoint selection policy offline. At deployment, the learned policy performs real-time viewpoint selection using only CNN-based belief updates, eliminating the need for computationally expensive online POMDP tree search. Experiments on a marine-debris forward-looking sonar dataset demonstrate that the proposed approach achieves competitive recognition accuracy while reducing sensing steps and motion cost compared to model-based baselines.

Physical adversarial attacks on vision systems are typically studied through scene manipulation, such as adversarial patches or projections, where the adversary controls what the camera observes. Camera-side attacks using stickers or auxiliary optics have also been explored, but they treat attacks as image-space perturbations from designed patterns. This misses how physical imperfections interact with scene-dependent lighting and optics. We identify a threat: passive lens-side damage that is persistent yet trigger-conditioned, producing optical artifacts that bias geometric inference under particular visual conditions. We instantiate this threat through Scratch-induced Lens Adversarial Streak Hijacking SLASH, a physical-world attack caused by small scratches on a camera lens or protective cover. Scratches interact with bright light sources and specular reflections to create structured streak artifacts that distort depth cues. Since the perturbation is fixed in the optical path but triggered by the scene, it is both persistent and selective. We formulate the attack in optical space, model the scratch pattern as a trigger-conditioned optical channel, and optimize one fixed configuration across diverse viewing conditions. We evaluate SLASH on monocular depth estimation and monocular 3D object detection in digital and real-world settings. Under the fixed-scratch constraint, directional depth shifts reach up to 32% relative error for monocular depth estimation, with consistent effects on monocular 3D object detection. Physical experiments confirm transfer to real camera recordings, inducing depth shifts above the model's natural prediction baseline. These findings reveal an attack surface where benign-looking hardware imperfections act as latent, scene-triggered adversarial mechanisms, challenging assumptions about physical robustness and motivating defenses for secure vision systems.

Background and Objective: Falls among elderly people can cause serious injury and reduce quality of life. Timely prediction and detection are essential to prevent harm and support well-being. We propose a portable, low-power, battery-operated, vision-based fall prediction and detection system using HPE on an AMD Kria K26 System-on-Module (SOM). The objective is a non-intrusive, privacy-preserving system for real-time fall detection. Methods: The system uses an Intel RealSense D455 range-sensing camera connected to the K26 SOM by USB. It captures synchronized RGB and depth frames, 640 x 480 x 3 and 640 x 480 pixels, at 60 FPS. The SOM runs a three-stage pipeline with quantized YOLOX, Anchor-to-Joint (A2J), and fall-detection models. YOLOX identifies human bounding boxes from RGB frames, then discards the RGB frames to preserve privacy. A2J uses depth frames to estimate 15 joint keypoints per person. A CNN uses selected joint coordinates (x, y, z) to classify fall activity. YOLOX was trained on CrowdHuman; A2J on ITOP, MP-3DHP, UR Fall Detection, and a custom SDSU PSG dataset; and the CNN on UR Fall Detection and SDSU PSG. The design used a single-core DPU with a serial pipeline and a dual-core DPU running YOLOX and A2J with multiple threads. Results: Quantized accuracy was evaluated using IoU >= 50% for YOLOX, mAP with a 10-cm rule for A2J, and classification accuracy, (TP + TN)/(TP + TN + FP + FN), for the CNN. Accuracies were 74%, 84.13%, and 75.85%. Throughput improved from 2.5 FPS for the single-threaded pipeline to 4.5 FPS for the multi-threaded version. Conclusion: Results demonstrate the feasibility of privacy-preserving fall detection on an AMD Kria K26 edge device. On-device HPE and fall classification runs without cloud dependency, supporting elderly monitoring and assistive healthcare. Future work will improve model accuracy and speed.

Vision sensors provide a lightweight solution for spacecraft proximity operations, but monocular spacecraft 6D pose estimation remains difficult under illumination variation, specular reflection, shadowing, weak texture, and background interference. These factors make local visual evidence spatially unreliable and can destabilize pose regression. This article proposes a Precision-Aware Illumination-Disentangled Vision Transformer (PAID-ViT) for robust spacecraft pose estimation.The proposed model separates pose-relevant structure tokens from illumination-sensitive appearance tokens, estimates patch reliability before pose aggregation, and uses foreground mask supervision to preserve silhouette cues. A parameter-free geometric recovery module converts normalized crop coordinates, log-depth, and a continuous 6D rotation representation into camera-frame rotation and translation. Experiments on SPEED+ V2, the SPEED+ validation/lightbox/sunlamp evaluation configuration used in this study, suggest that PAID-ViT reduces translation error and improves robustness in the challenging sunlamp domain, while ablation studies support the complementary roles of illumination disentanglement, reliability-aware token aggregation, mask supervision, and training-side regularization.

Most existing drone-based inspection systems require the drone to fly dangerously close to the target or follow complex flight paths to capture small details. In addition, drone flight is affected by disturbances and localization inaccuracies, which can cause the drone to lose sight of its supposed target when it has a narrow view. Furthermore, trajectory planning often requires prior information about the target's geometry, position, and orientation, which is not always available for non-structural targets such as trees, vehicles, or people. To address these challenges, this paper presents aerial_micro_inspection, a generic pipeline for aerial micro-inspection across different use cases. The pipeline assumes a PX4-powered drone equipped with two cameras: (i) a zoomed, gimbal-mounted inspection camera that captures fine details without requiring the drone to fly very close to the target, and (ii) a wide-field-of-view stereo navigation camera that acquires the target surface on site, estimates its range, and partitions it into smaller inspection regions. In addition, a vision-based feedback loop compensates for drone motion while the inspection camera visits small partitions of a larger surface. We evaluate the pipeline in simulation and real-world experiments, mainly in two use-case scenarios: tree inspection for detecting oak processionary caterpillars and their eggs, and greenhouse inspection of sticky traps for detecting whiteflies. The results show improved coverage robustness under drone disturbances in simulation, as well as effective detection of caterpillars and eggs and high-detail imaging of insects in real-world experiments. The pipeline is open-source, developed in ROS 2, and can be adapted to new applications by replacing the surface-segmentation and micro-target detection checkpoints. The code is available at: https://github.com/SaxionMechatronics/aerial_micro_inspection

We present Double-Helix Vision (DH), a geometry-based visual sampler that compresses 2D images into compact 1D signals using paired golden-ratio-inspired spiral trajectories. Rather than processing every pixel uniformly, DH employs two phase-shifted helices (Alpha and Beta, offset by 180 degrees) to sample the image with biologically-inspired foveation: high density at the center, sparse coverage at the periphery. At 4K resolution, DH achieves a 1,433x compression ratio (99.93% reduction) while preserving the geometric structure of the scene. The full perception pipeline -- including spatial mapping, temporal collision detection, and intra-frame structural disparity estimation -- runs in 0.52 ms at 1080p on CPU-only hardware, with no neural network dependencies. On CIFAR-10 at extreme sampling budgets (K=128 points per helix), DH achieves a +6.03% accuracy gain over uniform random sampling. A JSON-serializable Robotics API is provided, delivering sub-millisecond spatial perception reports in 2.7 KB packets. Code and benchmarks are available under the MIT License.

Standard dynamic vision sensors approximate retinal processing by detecting temporal contrast changes, offering high speed and high dynamic range. In this work, we explore whether incorporating additional biologically inspired processing stages - specifically spatial filtering and gain control - can offer advantages for certain downstream tasks such as saliency prediction. We present the first implementation of a multi-stage Silicon Retina model on the SCAMP-5 Pixel Processor Array, along with a GPU-based simulation framework. We evaluate the performance of our model on Video Intensity Reconstruction and Video Saliency Prediction. While the bio-inspired model is less effective at reconstructing absolute intensity frames, it achieves a 13% reduction in saliency prediction loss in comparison to standard DVS event representation, while reducing the event rate by approximately 47%. These experiments are obtained using a lightweight $\approx 100$k-parameter FireNet-style network, adapted from event-based reconstruction to saliency prediction. These results suggest that the silicon retina's "information distillation" mechanism can achieve a more efficient representation for downstream neural networks, particularly in bandwidth-constrained edge applications.

Smart eyewear enables unobtrusive, context-aware interaction through multimodal sensors and on-device intelligence, but is severely limited by power, memory, and compute constraints in a compact form factor. Open-hardware platforms supporting event-based vision and embedded ML at this scale are rare. This work introduces an open-source smart glasses platform for rapid prototyping of novel sensors and algorithms. Its modular design uses a flexible FPC interposer to support both event-based and frame-based cameras without full PCB redesign. A hardware-software co-designed power management system combines a configurable PMIC with event-driven wake-up via an nRF5340 coordinator, keeping the GAP9 RISC-V SoC powered down between inferences. The prototype achieves up to 11.5 hours of continuous on-device ML from a 200 mAh battery. As a demonstration, an egocentric hand gesture recognition pipeline was evaluated on the LynX dataset using polarity-separated event histograms from a Prophesee GENX320 camera. R(2+1)D achieved the best cross-subject accuracy of 83.94% (macro F1 = 0.781) under leave-two-subjects-out validation, with 78.3 ms end-to-end inference latency on the GAP9. Temporal augmentation and removal of ambiguous classes provided the largest gains (+8.9 pp). All hardware designs, firmware, and models are released open source.

Dynamic vision sensors (DVS) offer exceptional temporal resolution and dynamic range by asynchronously reporting pixel-level intensity changes. However, conventional DVS rely on a per-pixel independent triggering mechanism, ignoring the spatial integration performed by biological retinal ganglion cells (RGCs). Consequently, they lack the contrast sensitivity function (CSF) and its inherent sensitivity to mid-spatial frequencies, which inevitably leads to information incompleteness due to sub-threshold signal loss. To bridge this gap, we propose FS-DVS (Frequency-Selective Dynamic Vision Sensor), a novel paradigm that integrates a learnable spatial filter strictly preceding the event triggering process to mimic the RGC aggregation mechanism. By developing a differentiable event simulation framework, the spatial filter can be optimized end-to-end with downstream tasks. Our study reveals that starting from a delta function, the learned spatial filters spontaneously evolve into center-surround patterns that emphasize mid-frequency components, consistently aligning with human CSF. Beyond achieving substantial performance gains in object detection and action recognition, the consistent convergence to human-like CSF characteristics across different tasks underscores the universality of this mid-frequency selective mechanism. Compared to naively increasing sensor sensitivity or relying on post-processing, our paradigm achieves selective information enhancement with high noise resilience, providing a robust, biologically plausible blueprint for next-generation neuromorphic sensors.

Event-to-frame (E2F) reconstruction bridges asynchronous event streams with frame-based vision pipelines, but existing methods often face a trade-off between reconstruction quality and computational efficiency. In this work, we propose an efficient E2F framework that emphasizes causal temporal modeling and computation-aware design. The architecture adopts a recurrent encoder-decoder to incrementally aggregate event information with compact hidden states. To improve robustness under fast motion and illumination variations, a selective context fusion strategy is introduced to integrate event-driven features with prior intensity cues. Within this fusion process, a lightweight hybrid attention mechanism enhances feature selectivity without relying on heavy attention operations. Experimental results on standard benchmarks demonstrate that the proposed approach achieves competitive reconstruction performance while maintaining a favorable balance between accuracy and model complexity.

Vision-based tactile sensors (VBTS) recover high-resolution contact geometry but typically rely on opaque elastomer layers that prevent visual transparency, while RGB-D cameras provide global depth perception yet degrade significantly at close range. To address this limitation, we present TransTac, a transparent ultraviolet (UV)-encoded binocular VBTS that integrates visual observation and marker-based tactile reconstruction within a single compact device. The system employs a transparent elastomer embedded with UV-reflective markers and a prior-guided Delaunay stereo matching algorithm for robust sparse triangulation. To reliably detect densely distributed semitransparent markers, we develop a lightweight detector that enables stable localization under contact and deformation. The proposed prior-guided Delaunay matching improves correspondence robustness by approximately 21% compared with global assignment baselines while maintaining high reconstruction accuracy. In semantic evaluation, TransTac achieves up to 83.3% zero-shot recognition accuracy on tactile images, exceeding opaque tactile baselines by approximately 50 percentage points. Embedding analysis further reveals substantially stronger cross-modal alignment with natural images, with class-center similarity increasing from around 0.2 to over 0.77. Controlled near-distance experiments quantify the degradation of RGB-D depth reliability and demonstrate extended geometric coverage enabled by visuo-tactile integration. Finally, a compact prototype is implemented with an approximate hardware cost of $70.

Images composed of 2D pixel arrays are the standard input to computer vision algorithms, yet many underlying computations can be distributed across pixels. Transmitting raw, redundant, and noisy pixel data off the sensor remains inefficient, motivating a shift toward focal-plane sensor-processors that perform a significant part of the computation directly within each pixel. We envision pixels synthesizing higher-level signals locally, reducing downstream load, and providing richer inputs for higher-level vision tasks. We propose a fully parallelizable form of visual odometry and depth estimation across pixels, where sensor-processors exchange information through Gaussian Belief Propagation (GBP) to achieve consensus about camera motion and infer depth from per-pixel photometric observations and a surface normal prior. To maintain geometric stability during optimization, we introduce a keyframe-like anchoring mechanism that regulates the effective baseline between frames, enabling consistent motion and depth updates. Our method is evaluated on realistic datasets, demonstrating the feasibility of GBP-based pixel-level distributed odometry and depth estimation with keyframe anchoring on-sensor. Project Page: https://www.shinjeongkim.com/pixvod/

Ultra-high-resolution image sensors offer the potential to capture fine spatial details critical for many visual perception tasks, but acquiring and processing all pixels at full resolution is often infeasible under realistic bandwidth, latency, and power constraints. Existing approaches address this challenge through acquisition strategies such as spatial or temporal downsampling, which irrevocably discard information before task relevance can be assessed. In this work, we introduce a real-time, predictive, and task-aware foveated imaging system that operates directly at image acquisition time. Leveraging emerging dual-stream sensor architectures, our method dynamically allocates limited pixel bandwidth to task-relevant regions of interest while maintaining a low-resolution global context. We formulate foveated acquisition as a sensor attention policy-learning problem, in which past observations guide actions that determine future measurements, closing the perception-acquisition loop. Through extensive simulation across multiple perception tasks, we demonstrate that our approach achieves high task performance under strict pixel budgets and significantly outperforms relevant baselines operating at the same bandwidth. We further validate our system on a 200-megapixel dual-stream sensor, capturing real-world videos under realistic bandwidth and latency constraints, demonstrating the practical feasibility of task-driven, acquisition-time foveated imaging.