Passive

Can an attacker turn influence over an artificial intelligence (AI) adviser into a harmful quantum error-correction update? We identify an ambiguity in passive syndrome records that obstructs recovery selection, then show how additional calibration measurements support certified recovery updates under uncertainty and drift. In an odd-distance square toric code with error-free preparation, syndrome measurements, and recovery operations, opposite coherent $X$ rotations produce identical passive syndrome-history distributions. Yet a fixed phase correction can help at one sign and harm at the other. A terminal logical measurement on known encoded calibration states supplies the missing sign information. A separate evaluator accepts an update only when calibration uncertainty and a justified drift bound certify improvement over the current recovery, without assuming that the adviser recommends correctly. In simulated advice attacks, calibration-confidence checks reject harmful proposals while retaining beneficial updates under honest advice. We derive sufficient limits on calibration age that require improvement through deployment. In matched simulations, a validated channel-specific bound retains more beneficial updates than the general bound after accounting for evaluation time, while preventing the tested harmful activations under the stated drift assumption. A separate surface-code experiment includes stochastic circuit faults and noise changing during acquisition. Deterministic controllers achieve at least as many beneficial updates with the same observations. Violating the drift assumption permits harmful acceptance in the toric experiment. The results identify information required for recovery selection, establish conditional guarantees against harmful updates, and quantify the recovery improvements forgone through conservative acceptance.

Combining aerial thrust with spring-loaded hopping makes monopedal quadcopters promising for locomotion over complex terrain, but heuristic proportional-integral-derivative (PID) tuning limits coordination between active thrust and passive contact dynamics. We present a direct estimated-state-to-motor Proximal Policy Optimization (PPO) policy that commands four motors without an explicit hopping state machine or low-level attitude PID. Its reward combines Energy-Manifold Shaping for mass-normalized vertical-energy tracking and apex-state anchoring with Efficiency Shaping, which uses a history-aware power estimator to penalize general power use, impose an additional airborne-power cost, and penalize airborne near-stationarity. In representative hardware runs, the PPO-based control stack reduced cycle-averaged measured electrical power by 30.7% and mean total normalized thrust by 49.8% relative to the tuned PID-based control stack, while retaining repeatable commanded-height hopping and more concentrated landings. These observations are consistent with improved use of passive dynamics and reduced measured electrical demand.

Passive counterweights are simple gravity compensators, but a counterweight selected from a single pose is not generally optimal for the configurations and tasks a manipulator actually executes. This paper develops a task-distribution-aware synthesis framework in which the operating distribution $ρ(q)$ enters the design explicitly. For a counterweight moment $p=m_c r_c$ with gravity torque $-gpφ(q)$, the weighted mean-square residual gravity torque has the closed-form minimizer $p^*=E_ρ[τ_gφ]/(gE_ρ[φ^2])$. If payload gravity torque is affine in payload mass, the optimum is also affine: $p^*(m_p,ρ)=p_0^*(ρ)+m_pK_p(ρ)$. For fixed static moment, added counterweight inertia is $I_c=pr_c$ while mass is $m_c=p/r_c$, so mass-radius selection is underdetermined unless physical constraints are specified. A recovered three-link manipulator is used as a case study. At $r_c=0.20$ m, zero-payload equivalent optima are 0.672 kg for uniform joint-space operation, 0.683 kg for approximately uniform task-space operation, 0.713 kg for a representative pick-and-place family, and 0.952 kg for a high-gravity-biased distribution, a change of more than 40% caused solely by the operating distribution. Nondominated fronts show that preferred mass-radius pairs depend on declared engineering bounds. A rated-torque-referenced all-joint screen increases zero-payload feasible task-space coverage from 78.1% without compensation to 93.7% for the uniform-distribution design. A lumped point-mass trajectory study gives a provisional crossover from no counterweight at very aggressive motion to stronger compensation as motion slows. These actuator and dynamic results are engineering consequence studies rather than physical validation.

Underactuated robotic hands achieve adaptive and robust grasping with a reduced number of actuators, but predicting the stable equilibrium pose of the grasped object remains a significant challenge. This paper introduces a quasi-static analytical approach to assess passive stability in underactuated multi-finger hands. A novel three-finger hand architecture integrating a differential spring-loaded slider mechanism is introduced, enabling versatile and adaptive grasping. The study focuses on how the differential mechanism influences the overall grasp behavior and analyzes the effect of object size on the stable equilibrium configurations for two canonical grasp types: cylindrical and spherical.

Passive mechanical interfaces offer a lightweight alternative to actuated manipulators for quadruped payload carrying, but their impedance directly couples the payload dynamics with the locomotion pattern. This paper analyzes how passive-arm stiffness-damping selection affects payload-carrying locomotion under different gait and payload conditions. We compare damped and underdamped passive-arm impedance configurations in simulation during flat-ground locomotion. For crawl gaits, where the support polygon remains well defined, the results show that underdamped impedance increases passive-joint oscillations and can reduce the ZMP margin with respect to the support polygon. Trot is retained as a dynamic excitation case for the passive arm, but it is not used for direct ZMP-margin stability comparison. The results are summarized in gait-payload-stiffness-damping maps, where ZMP-margin reduction is evaluated for crawl gaits and trot is retained only as a passive-arm excitation case.

Speech deepfake detectors usually emit one score per utterance, but a borderline score does not reveal why two examples differ during retrospective error analysis. We ask whether a final score can be calibrated from component fields while keeping those fields visible for inspection. We build a decision record with a passive detector score and a score from a probe applied to a marked copy. It also includes retrieval support held out of the evaluated family, a margin from a support-set profile, and raw neighbor closeness. A cross-fit calibrator combines these fields and two differences between raw scores into one final score. On matched ASVspoof development data, the calibrated record reduces equal error rate (EER) by 3.48 percentage points relative to the fixed retrieval-augmented rule. It reaches 8.43% EER, whereas a passive WavLM baseline reaches 6.71% on the same subset. The record is therefore not the strongest detector in this comparison. Its value is to retain inspectable component fields while producing one scalar score for retrospective diagnosis.

Learning-by-Demonstration (LbD) enables intuitive robot programming by capturing expert skills, which is crucial for agility in high-mix, low- volume manufacturing. This systematic literature review analyzes passive LbD for industrial assembly processes, focusing on the perception architecture and the generalization of the perceived demonstration. We specifically investigate one-shot approaches where only a single demonstration is required. The review evaluates how systems adapt to new assemblies using this limited data. We identify a shift towards object-centric perception, allowing learned primitives to be transferred to new product variants with minimal training.

Controllers that guarantee energetic passivity with respect to the pair of external force and velocity realize safe interaction between the mechanical system and its physical environment. However, solely adhering to energetic passivity constraints may impose fundamental limitations on control performance and, in some cases, prevent the successful execution of controlled tasks. In addition, external disturbances from the physical environment can drive the system energy level and states beyond operational regions, thereby undermining task performance and safety. In this paper, we study a robust time-varying semi-passive velocity field control to aim to relax the inherently conservative nature of fully passive control methods in a controlled manner. Specifically, the proposed control method guarantees passivity of the closed-loop system with respect to the force-velocity input-output pair when the energy level exceeds a predefined level, while permitting non-passive behaviors to preserve task performance otherwise. Furthermore, the energy level and the states of the closed-loop system are proved to converge to bounded domains even in the presence of unpredicted disturbances. Additionally, the proposed method also enables constraining power flow between the closed-loop system and its physical environment to enhance safety in the interaction process. Numerical simulation examples demonstrate the effectiveness of the proposed method.

Learning-based autonomous driving (AD) systems can perform reliably in familiar conditions, yet rare distribution shifts and long-tail events remain a major source of abrupt failure. A central limitation is that most agents learn primarily from passive experience and lack mechanisms to estimate when their competence is insufficient, seek timely assistance, and convert safety-critical encounters into targeted improvement. Here we present self-aware guided exploration (SAGE), an active learning framework for post-training adaptation in AD. SAGE learns a predictive world model that generates two online intrinsic signals: fear, which estimates short-horizon predictive risk and model uncertainty, and curiosity, which measures novelty through prediction error. Curiosity adaptively calibrates the intervention threshold for fear, allowing the agent to regulate risk in a context-dependent manner. When predicted fear exceeds this adaptive threshold, the agent transfers control to an expert or fallback policy and uses the resulting takeover trajectories for focused imitation learning. In parallel, fear is integrated into policy optimization and evaluation as a safety-oriented constraint to reduce performance regressions during adaptation. We evaluate SAGE in simulated route-transfer tasks, Waymo-based logged driving scenarios, CARLA occlusion hazards, and real-world mobile robot navigation tests. Across these settings, SAGE improves robustness in novel and safety-critical scenarios, reduces safety violations, and maintains task performance comparable to strong baseline policies. These results suggest that agents can improve after initial training by estimating the limits of their competence, requesting guidance when needed, and learning selectively from rare high-value events.

Understanding large codebases is a long-horizon task for Large Language Model (LLM) agents: answering a single question can require building and running the software, tracing execution across files, and synthesizing evidence over tens of minutes. On SWE-Atlas QnA, a benchmark of long-horizon questions over production repositories, a single Claude Code agent (Opus 4.6) resolves only 32.3% of tasks. Dividing the work among agents with clean contexts mitigates this limitation. However, the subtasks of code comprehension are interdependent. One agent's findings can rewrite another's task, so agents must coordinate during execution, not only at phase boundaries. Existing multi-agent systems support such exchange only between phases, through staged handoffs or synchronized rounds. Communication and work remain mutually exclusive. A discovery made mid-execution cannot be shared until the next boundary. We present AgentRadio, an asynchronous message-passing layer that equips coding-agent harnesses with three primitives: threads, messages, and waiting for mentions. The last runs as a background task, surfacing teammates' messages without interrupting foreground work, so each agent remains passively aware of its peers and folds new findings into its ongoing task. Under a five-phase protocol of division of labor and negotiation, four agents organized by AgentRadio resolve 62.1% of tasks, 29.8 points above a single agent and above Claude Code with the newer Opus 4.8 (57.2%). Rubric-level analysis shows the gain growing with task difficulty, consistent with mid-course correction as the underlying mechanism. Our code is available at https://github.com/Coral-Protocol/AgentRadio.

LLM-agent systems can solve complex tasks through dynamic self-organization and emergent cooperation. Auditing this process is essential because plausible intermediate or final outputs can conceal incomplete or unsupported work and poorly allocated responsibility, ultimately compromising response quality. While existing approaches may record messages, tool calls, provenance, or task dependencies, an auditability gap exists as they do not jointly represent what work remains, who is responsible for it, and what evidence justifies each work-state transition. We address this auditability gap by proposing \emph{Integrated Cooperation-Obligation REpresentation} (iCORE). It creates a unified encoding $X=(G,Q,Π)$ integrating observable interactions as a cooperation graph $G$, evolving work and assignments as an obligation graph $Q$, and the audit map $Π$ linking them with verifiable properties and evidence. This iCORE representation enables the auditor to certify two complementary properties: {Work soundness}, where every active decision-relevant work assertion must have a finite justification through $G$ and $Π$; and {Agent-assignment stability}, which requires that no feasible alternative agent improve the declared contribution value for an evaluated obligation by more than $ε$. We establish local-to-global soundness and assignment-regret guarantees and a performance bound under stated conditions. iCORE is an instrumentation layer over workflows. Numerical results show that the full coupled state exactly reconstructs soundness and assignment defects in two execution modes and that, relative to passive full-state observation, iCORE-Audit yields absolute trajectory-quality improvements of $11.5\%$ and $26.4\%$ in controlled and real-LLM execution, respectively, with corresponding absolute terminal-performance improvements of $15.1\%$ and $31.0\%$.

Conventional CAPTCHAs pose puzzles that modern AI systems increasingly solve, while behavioral and cryptographic-attestation defenses carry privacy or enrollment costs. We investigate an orthogonal signal: the physical timing behavior of a client's GPU under a controlled WebGL rendering workload. Unlike WebGL fingerprinting, which hashes pixel output into a static device identifier, we measure render-timing dynamics to classify rather than identify, leaking no persistent identifier. We characterize the in-the-wild adversary with a 12-hour passive deployment (207 unsolicited requests; 86% automated; 85% of browser-claiming clients failed HTTP header-consistency checks). We then collect labeled GPU-timing samples through a single public endpoint exercised by real browsers (positive class, 13 distinct GPUs) and by keyed headless automation across a render-backend matrix (negative class). Software-rendered automation -- empirically the dominant real-world adversary -- separates from genuine GPUs by roughly 5x in mean render time. On a confound-controlled comparison (identical GPU family and browser engine, differing only in headless vs. interactive execution), headless automation on real hardware still exhibits a distinct timing signature, separating from human samples by 75-106% on frame jitter, timer-quantization ratio, and coefficient of variation. We report these as pilot-scale findings on a single GPU architecture and outline the cross-architecture collection required to establish generalization.

Autonomous flight in confined and cluttered environments is fundamentally limited by the restricted field of view (FoV) of onboard sensors. Passive self-rotation expands sensing coverage without additional sensors but introduces a tradeoff between swept-FoV refresh rate and flight performance. This letter presents a configuration-induced passively self-rotating tricopter for perception-enhanced autonomous flight. Firstly, the rear-arm configuration parameter is exploited to regulate the passive self-rotation operating point, providing an airframe-level mechanism for balancing swept-FoV refresh rate and flight performance. Secondly, a hierarchical autonomy framework integrating planning and control is developed to enable agile and robust autonomous flight under continuous passive self-rotation. For waypoint-based inspection, guide-point replanning is further used to improve task-level coverage. Extensive real-world experiments, including high-speed trajectory tracking, disturbance-rejection tests, and autonomous navigation in representative cluttered environments, demonstrate the effectiveness of the proposed approach for perception-enhanced autonomous flight.

In underwater covert cooperative missions, autonomous underwater vehicles (AUVs) often cannot rely on active sonar to continuously obtain complete information, since active sensing and frequent communications increase the risk of exposure. As a result, AUVs primarily rely on passive observation, an approach that yields incomplete local perception and limited task efficiency. Although underwater acoustic communications can mitigate this limitation through information sharing, they are simultaneously constrained by long delays, severe interference, low reliability, and the risk of covert exposure. Existing communications-oriented multi-agent reinforcement learning (MARL) studies often model communication as an ideal information flow, whereas traditional communication optimization primarily focuses on link-level performance. However, both are insufficient to characterize the actual contribution of perceptual information to cooperative tasks under realistic conditions of covert physical communications. This paper proposes a Sensed Information Value Realization Multi-Agent Reinforcement Learning (SVR-MARL) framework that leverages practical information to characterize the utility of information for cooperative tasks and learns distributed cooperative policies under realistic communication and covert constraints. Through a case study of covert multi-AUV cooperative localization and tracking, the potential of the proposed framework to improve collaborative task efficiency while reducing unnecessary communication and exposure risks is demonstrated.

Distributed swarms typically rely on either active wireless communication or passive vision, and they are frequently hindered by bandwidth constraints or environmental sensitivity. This paper proposes Infra-Swarm, a robust vision-based swarm. Each robot is equipped with a near-infrared light source and four ordinary gray-scale cameras. The Infra-Swarm system directly measures the centimeter-level 3D position of neighbors based on the position (bearing) and intensity (strength) of optical flares in the captured images. By utilizing 940 nm narrow-band filters to physically reject 99.2% of ambient light interference, the perception front-end achieves hardware-level robustness against illumination variations. Furthermore, its minimal computational overhead provides a resilient foundation for the massive scalability of robotic collectives on resource-constrained hardware.

Multi-robot localization that is accurate and consistent is imperative for downstream tasks such as planning and control. Centralized filtering approaches optimally fuse all available sensor measurements of the team. However, a centralized solution is rarely implementable due to hardware, communication, and computational constraints. Distributed approaches deploy a filter on each robot to estimate their own state and neighbours' states using inter-robot communication. This paper proposes a consistent, communication-efficient, and consensus-based distributed filtering framework that shares both preintegrated odometry and relevant shared states among communicating robots. The proposed method is validated in simulated and experimental scenarios, showing near centralized performance in accuracy, and especially in consistency, compared to the current state-of-the-art decentralized approach.

Autonomous agents promise substantial gains in speed, scale, and labor efficiency, but their failures can impose abrupt and often irreversible costs. The central challenge for agentic automation is therefore to increase the benefits of automation while bounding the consequences of failure. While databases remain central to modern computing, agents operate over a broader data environment spanning files, APIs, applications, and system state. In this talk, I will outline early work on Agentic Data Environments -- the execution substrate in which agents operate -- that both amplify agent capabilities and enforce safety guarantees. This perspective reframes data systems from passive stores of state into active substrates for safe, reliable execution.

Long-term user memory is essential for personalized conversational agents, yet many memory systems still expose memory through passive retrieval interfaces, making the model a consumer of pre-selected evidence. We introduce NapMem, a framework for learning to use long-term user memory as a structured action space rather than passively retrieved context. NapMem organizes user history into a linked multi-granularity memory pyramid, where raw conversations, typed memory records, topic tracks, and user profiles are connected through provenance relations, and exposes these levels through memory tools. The agent is trained to select memory according to the query and intermediate evidence, allowing it to inspect different memory granularities before answering. Experiments on PersonaMem-v2, LongMemEval, and LoCoMo show that a NapMem agent trained with memory-tool reinforcement learning is competitive across diverse memory-intensive tasks, while evaluations on non-memory tasks suggest that the learned policy largely preserves general reasoning and tool-use abilities. Additional analyses examine storage, inference cost, tool-use behavior, and ablations over navigation, memory granularity, and RL training. Our results suggest that long-term user memory benefits from coupling structured storage with a learned policy for using memory at the appropriate granularity.

Robot-environment interactions in dynamic or unstructured settings are often degraded by impact shocks, vibrations, and uncertainties in contact geometry and mechanical properties. This paper proposes an interaction architecture that combines feedback-linearized hybrid position-force control with a passive compliant degree of freedom embedded at the end-effector. Unlike conventional hybrid position-force control, which relies mainly on active feedback, force sensing, and gain tuning, the proposed architecture uses a physical spring-damper interface to store and dissipate impact energy at the contact point before high-frequency shocks propagate to the actuated joints and force-control loop. The approach is evaluated in MATLAB/Simulink on a 2-DOF planar manipulator with three end-effector configurations: rigid, spring-only, and spring-damper. Results under fixed and time-varying interaction conditions show that the spring-damper configuration provides stronger attenuation of contact-induced oscillations, lower force and velocity error variance, and smoother joint-torque response. Representative reductions include 36.5% in fixed-environment tangential force-error standard deviation, 25.4% in variable-environment normal force-error standard deviation, and 41.1% in variable-environment normal velocity-error standard deviation.

Mobile GUI agents increasingly face long-horizon tasks that require reading, updating, and reusing task-relevant data across pages and applications. Existing methods treat memory largely as passive storage, where past observations are accumulated and retrieved when needed. Yet retrieving a value does not reveal its current role in the workflow. The agent must still infer from accumulated records whether the value should be used now, has already been used, or must wait for a later dependency. This implicit reconstruction becomes unreliable in long trajectories with repeated values, distractors, and outdated states, causing repeated or missed operations. To address this, we propose Active Task Driving Memory (ATMem), which shifts GUI-agent memory from passive storage to an actively maintained execution state. ATMem maintains task-relevant information as a continually updated execution state that links each value to its role and current status, enabling action selection based on the current workflow state. While supervised fine-tuning enables the agent to construct ATMem, it does not teach when ATMem is beneficial. We therefore introduce STR-GRPO, an online reinforcement learning method that encourages selective use of ATMem based on its contribution to task completion. STR-GRPO contrasts memory-on and memory-off rollouts to estimate when memory use improves execution, while memory-cost-aware reward discourages costly memory usage that does not improve execution. To evaluate whether agents can complete all in-scope work while avoiding out-of-scope actions, we build a challenging mobile benchmark. From a list of near identical entries, agents must act on every entry that satisfies the instruction and reject entries that violate its constraints. We further introduce App-Level Progress and Scope-Aware F1 to measure these two dimensions separately.

Wheeled-legged robots possess both agile mobility for traversing complex terrains and high efficiency, making them suitable for long-distance transportation applications. Conventional actuated wheeled robots require specialized hardware and electrical design due to the incorporation of wheel components. We propose a novel and low-cost passive wheeled legged robot equipped with standard casters on each leg to obtain omnidirectional mobility. The control method employs an asymmetric actor-critic structure, enabling the utilization of the privileged information of the passive caster's angles and velocities. We develop a caster base posture adjustment strategy based on velocity commands, utilizing actuated joints to modify the caster base joint axis posture and thereby adjust the propulsion direction of the casters. Moreover, we implemented multiple propulsion modes to achieve varying degrees of caster twisting oscillation, converting these into propulsive force. We conducted a slalom test and mode switch experience, which shows the passive wheeled quadruped could achieve omnidirectional movement versatility, and reduce the cost of transport (COT) by up to 89.1% with respect to legged motion.

For a wheelchair user, a standard blue line on a map is often a broken promise. While platforms like OpenStreetMap (OSM) successfully capture where a path is, they frequently fail to convey how it physically feels to travel on it. This information barrier is problematic for wheelchair users. To solve this issue, we present OmniPath, a system that moves from passive mapping to proactive environmental auditing. Our framework fuses the network topology of OSM with the submeter precision of high-density aerial LiDAR (USGS 3DEP) to create a high-fidelity 3D model of the pedestrian environment. Rather than simply routing a user, our agent virtually traverses the network, analyzing the surface in 0.5 meter increments. It rigorously quantifies physical friction points specifically running slope, cross slope, and vertical discontinuities against ADA compliance standards, calculating a weighted severity score to categorize hazards from Mild'' to Critical.'' To ensure real world reliability, we validated the system against 200 physical ground truth field surveys across the National Mall using stratified random sampling. The framework demonstrated strong diagnostic reliability for high-severity hazards, achieving F1-scores of 0.60 for Severe and 0.58 for critical categories. By automating this micro-scale inspection, OmniPath identifies the ``invisible'' barriers that standard maps miss, effectively transforming a static dataset into accessibility data source that anticipates accessibility challenges before the user ever leaves home.

The capability to encode spatially distinct magnetization patterns within soft materials enables remote control over complex deformations. This characteristic is especially important for microfluidic platforms, where limited dynamic control of channel boundaries and laminar flow conditions usually restrict fluid transport and interactions. The present study introduces a shape-programmable magnetic soft membrane actuator as an active microchannel component that can dynamically modulate its shape under magnetic fields and therefore the microfluidic environment. The membrane is magnetically programmed using a template-based approach, which allows it to be controllably deformed in the form of a sinusoid under the influence of an external magnetic field. The membrane's integration into a microchannel converts a passive channel wall into a dynamically changeable interface, allowing active fluid manipulation and enhancing micromixing in laminar flow conditions. The proposed approach establishes a versatile platform for wirelessly controlled deformable interfaces in next-generation microfluidic and lab-on-chip systems.

Massive unstructured multimodal streams suffer from high "data entropy," impeding both efficient human knowledge acquisition and high-quality AI post-training. Existing passive annotation paradigms, heavily reliant on heuristic rules or general VLMs, are costly, monotonous, and fail to unlock the deep procedural logic embedded in raw data. We elevate data processing to a learnable capability, proposing a paradigm shift towards Agentic Data Tailoring, which actively refining and structuring data to align with diverse user and downstream intents. To overcome the data scarcity bottleneck in training such high-order capabilities, we design a two-stage pipeline grounding generative semantic synthesis in deterministic Factual Anchors, yielding a large-scale dataset spanning five core physical and digital domains. Building upon this, $\text{DataClaw}_0$-9B model synergizes Supervised Fine-Tuning (SFT) with Group Relative Policy Optimization (GRPO), achieving robust alignment with complex refinement and tailoring intents. To systematically quantify this capability, we construct $\text{DataClaw}_0$-val, the first benchmark dedicated to data refinement. Crucially, we adopt downstream post-training as the ultimate validation touchstone. Evaluations on video generation, real-world VQA, and GUI navigation confirm that $\text{DataClaw}_0$ delivers high-information-density tailored data, facilitating efficient model adaptation to new tasks under limited training data regimes. Project page: https://czjdsg.github.io/MakeAnyData

Can intelligence be measured? We propose that intelligence can be defined as the lawful amplification of rare but valid futures: a system increases the probability of outcomes that would be unlikely under passive dynamics but remain admissible under the constraints of the domain. We start with the premise that an intelligent system must model the world and its own place within it. Because the system is part of the world it models, this leads naturally to recursive self-simulation: the system represents futures in which its own actions are part of the trajectory. Our central results give a necessity statement and a conditional near-sufficiency statement connecting this architecture to a precise thermodynamic measure of lawful amplification of rare-valid futures: high rare-valid lift is impossible unless the internal simulation identifies rare-valid futures with high fidelity; conversely, when rare-valid fidelity is high and the simulation contains an effective policy, the achievable lift approaches the actuation-limited optimum. Thus recursive self-simulation is not merely a plausible feature of intelligence but, under the stated assumptions, is necessary and nearly sufficient for high thermodynamic intelligence. The resulting framework makes intelligence measurable on a universal scale, from passive matter and feedback controllers, large language models, and humans as text generators to Maxwell-demon-like information engines.

We introduce a wavelength-addressable diffractive optical network that transforms illumination wavelength into a high-dimensional control parameter for arbitrarily programmable 2D beam steering. The proposed passive architecture comprises cascaded spatially optimized diffractive layers, jointly designed using deep learning, to rapidly map distinct wavelengths to predefined/desired output angles. Unlike conventional single-layer dispersive optical elements, which are physically restricted to 1D linear mapping, this framework harnesses complex wavefront transformations to utilize the illumination wavelength as an intrinsic addressing key for arbitrary 2D beam steering, eliminating the need for mechanical scanning or electronic phase control. We numerically demonstrate wavelength-controlled beam steering across 625 wavelength channels spanning 400-750 nm, realizing a 25 x 25 array of independently addressable beam positions with subwavelength positioning accuracy and high channel fidelity. Unlike conventional gratings, which constrain wavelength routing to a linear trajectory, the proposed diffractive network performs nonlocal wavefront transformations, enabling arbitrary wavelength-to-angle mappings across a 2D field of view. We further validate the proposed framework experimentally in both the terahertz and visible spectral regimes, demonstrating wavelength-multiplexed beam steering using 3D fabricated passive diffractive layers at terahertz frequencies and phase-only spatial light modulators in the visible spectrum. This wavelength-addressable diffractive architecture establishes a compact and scalable paradigm for high-speed programmable beam steering, with potential applications in optical communications, routing, imaging, sensing, and emerging photonic information-processing systems.

Physical adversarial attacks on vision systems are typically studied through scene manipulation, such as adversarial patches or projections, where the adversary controls what the camera observes. Camera-side attacks using stickers or auxiliary optics have also been explored, but they treat attacks as image-space perturbations from designed patterns. This misses how physical imperfections interact with scene-dependent lighting and optics. We identify a threat: passive lens-side damage that is persistent yet trigger-conditioned, producing optical artifacts that bias geometric inference under particular visual conditions. We instantiate this threat through Scratch-induced Lens Adversarial Streak Hijacking SLASH, a physical-world attack caused by small scratches on a camera lens or protective cover. Scratches interact with bright light sources and specular reflections to create structured streak artifacts that distort depth cues. Since the perturbation is fixed in the optical path but triggered by the scene, it is both persistent and selective. We formulate the attack in optical space, model the scratch pattern as a trigger-conditioned optical channel, and optimize one fixed configuration across diverse viewing conditions. We evaluate SLASH on monocular depth estimation and monocular 3D object detection in digital and real-world settings. Under the fixed-scratch constraint, directional depth shifts reach up to 32% relative error for monocular depth estimation, with consistent effects on monocular 3D object detection. Physical experiments confirm transfer to real camera recordings, inducing depth shifts above the model's natural prediction baseline. These findings reveal an attack surface where benign-looking hardware imperfections act as latent, scene-triggered adversarial mechanisms, challenging assumptions about physical robustness and motivating defenses for secure vision systems.

Artificial dynamic tactile sensing requires sensitivity, robustness, and compliance, yet existing technologies face trade-offs when scaling to large-area arrays, compounded by wiring complexity and cost. Here, we report a passive distributed paradigm using deep sub-wavelength acoustic waveguides that decouples performance from structural flexibility. Elastic-membrane-capped Helmholtz resonators interconnected by spring-reinforced microtubes form an enclosed network with invariant acoustic transmission under macroscopic bending. By sparsely embedding microphones, the system achieves real-time localization (4 mm highest spatial resolution; >99% accuracy in a 4 microphones 64-node sensing array) and waveform reconstruction of low-frequency signals (<100 Hz). Fast Continuous Wavelet Transform and a lightweight neural network enable inference within 5.5 ms. We demonstrate conformable prototypes-fingertip arrays, a tactile glove, and large-area skins-detecting stimuli from single-hair contact to 5-mg particle impacts, arterial pulse waves, feather touches, and finger contact. This establishes a scalable, flexible, low-cost paradigm for next-generation human-machine interfaces.

Large language models (LLMs) have shown promise in automating scientific peer review. However, existing approaches often struggle to generate in-depth reviews supported by concrete evidence. We argue that a key limitation is the lack of flexibility to proactively investigate suspicious parts of a paper based on accumulated evidence, as human reviewers do. In this paper, we explore how to enable an LLM-based review agent to perform such proactive investigation. We find that this can be naturally formulated as a Markov Decision Process (MDP), and propose ProReviewer, a scientific peer review agent that proactively reviews a paper guided by a maintained, structured review log. The structured review log serves as a workspace for the agent to track evidence and intermediate findings collected during review. Experiments show that ProReviewer with an 8B backbone, trained by supervised fine-tuning and optimized by reinforcement learning, achieves the highest average score across five quality dimensions, outperforming prompt-based methods with much larger frontier LLMs by up to 39% and the strongest fine-tuned baseline by 16% relatively. It also attains the highest win rates against baselines in human evaluation.

A long-standing finding in the causal learning literature is that adults struggle to identify conjunctive causal rules, where an effect requires the simultaneous presence of multiple causes, while performing better in disjunctive settings. However, most demonstrations of this conjunctive handicap'' rely on passive observation paradigms with limited evidence, where learners have no control over evidence generation. This paper asks whether this bias persists when adults are granted agency through active exploration. Using a modified blicket detector'' task, adult participants freely intervened to identify causal objects under conjunctive or disjunctive rule structures. We show that active exploration substantially improves adults' conjunctive causal reasoning, although conjunctive rules still require more tests to infer than disjunctive rules. We further compare human performance to a range of large language models in the same setting. While some state-of-the-art models approach human-level performance on hypothesis inference accuracy, they often exhibit less efficient exploration strategies and similar conjunctive-disjunctive performance gaps.

Wall shear stress (WSS) governs near-wall transport dynamics and is a key hemodynamic indicator in cardiovascular flows, yet remains difficult to infer accurately due to the need for precise computation of near-wall velocity gradients. Passive scalar fields, such as concentration or temperature, are advected by the same underlying velocity field and have the potential to uncover hidden flow physics metrics such as WSS. In this work, we demonstrate such reconstruction from spatially limited passive scalar observations using two fundamentally different inverse frameworks: a differentiable physics framework based on discrete adjoint, PDE-constrained optimization, which enforces the governing equations as hard constraints, and physics-informed neural networks (PINNs), which treat them as soft constraints. Benchmark problems include a 2D canonical backward-facing step (2D-BFS) and a 3D patient-specific stenotic coronary artery. For the 2D-BFS case, evaluated under three measurement scenarios (near-wall, far-field, and combined), PINN achieves high accuracy when near-wall data are available but fails when restricted to far-field measurements, whereas the differentiable physics approach recovers accurate WSS across all scenarios. In the 3D patient-specific case, the differentiable physics framework outperforms PINNs, yielding accurate WSS reconstruction. These results establish that measurement location and inverse formulation jointly determine reconstruction fidelity in scalar-based near-wall flow inference. The proposed framework opens a path toward estimation of near-wall hemodynamics from scalar transport data, with broader applicability to fluid flow problems where passive scalars can be observed.

With the growing prevalence of modern ubiquitous computing technologies, multi-modal tracking systems hold promise for providing timely awareness and reassurance to stakeholders such as remote family members (RFMs) of older adults, who play a central role in care coordination. However, combining heterogeneous data streams into high-level, meaningful content - such as retrospective summaries - remains challenging. While recent work has demonstrated the promise of large language models (LLMs) for interpreting multi-modal tracking data, less attention has been given to generating narrative accounts for stakeholders like RFMs, who possess rich personal knowledge of older adults and strong emotional responsibility, yet have limited visibility into their daily lives and limited capacity for caregiving. In this work, we explore how LLMs can be used to generate retrospective summaries from multi-modal tracking data for RFMs of older adults. We leveraged and customized an existing system, Vital Insight, to generate initial summaries on different dates and data availability scenarios as technology probes, and conducted interviews with 11 RFMs to gather feedback. Based on these insights, we redesigned the system into a multi-layer, multi-agent, insight-driven summary approach that builds from objective statistics and descriptions to enriched, context-aware narratives. We then compared the redesigned summaries with the initial versions through a survey with the same 11 RFMs and found significant improvements in satisfaction, perceived helpfulness, trust, and willingness to receive the summaries. We conclude by presenting design implications for AI-generated summaries for RFMs and broader contexts, emphasizing the need to support RFMs' sensemaking shift from simply presenting ''What'' data were collected, to explaining ''How'' is my loved one doing and ''Why''.

Contact-rich manipulation demands both high-level semantic reasoning and the safe regulation of high-frequency contact dynamics. While Vision-Language-Action (VLA) models provide unprecedented semantic generalization, their low-rate outputs lack the reliability required for direct plant authority in force-sensitive tasks. To bridge this semantic-to-control gap, we introduce PaCo-VLA, a passivity-shielded compliance prior that recasts the VLA interface. Rather than trusting VLAs with direct motor commands, PaCo-VLA treats network outputs as task-level compliance proposals: semantic bindings, task stages, and admittance schedules. A high-frequency, proposal-independent passivity shield governs these proposals through energy-tank accounting and boundary checks, preventing invalid, stale, or unverified model predictions from bypassing low-level contact physics. This decoupled architecture also enables causal evaluation, isolating semantic contributions from geometric shortcuts. Extensive simulated and real-world connector-insertion experiments demonstrate that PaCo-VLA achieves superior precision over unshielded VLA baselines, sustaining zero passivity violations even under adversarial compliance shifts. This framework establishes a provably sampled-passive runtime contract at the admittance port and provides a runtime interface for deploying foundation models in contact-rich domains.

While agents are increasingly spending more resources, today agent cost is mostly measured only after execution. A Budget-Aware Agent (BAGEN) should treat budget as an active control signal, rather than a passive cost metric. We first systematically define budget estimation as internal budgets (from agent computation) and external budgets (from agent actions). We then formalize budget-awareness as progressive interval estimation: at each step of a plan, an agent should predict an upper and lower bound on remaining budget, and alert when completion is unlikely. Scoring with a rollout-replay protocol, we find consistent failure patterns on four environments and five frontier agents: (1) strong agents do not necessarily have strong budget-awareness, with correlation r=0.35. (2) frontier models are consistently over-optimistic, continue spending on tasks that are unlikely to succeed, instead of alerting the user early. (3) budget-aware signal is actionable and trainable. Early stop saves 28-64% tokens on failed trajectories, and SFT+RL strengthens early stop and alert behavior. (4) precise interval calibration remains challenging, with interval coverage capping at 47% after SFT+RL. Project page: https://ragen-ai.github.io/bagen/

Robotic locomotion can become efficient when mechanisms exploit passive dynamics, compliance, and resonance rather than track prescribed trajectories. This paper formulates natural locomotion as an exchange principle for systems whose motion is mediated by environmental constraints or interactions. A motion is natural when an internal oscillator returns periodically, the body pose drifts, and the mean Propulsion--Oscillator Exchange power (POE power) vanishes over one cycle. The selected family is a Natural Locomotion Manifold (NLM). We develop the conservative realization of this principle for continuous ideal environmental constraints: the constraints do no external work, total mechanical energy is conserved, and zero mean POE power is an internal exchange with the environment-mediated propulsive channel, not external energy input. The method is a closed/open construction. The propulsive channel is first closed to reveal an effective internal oscillator, organized by scalar action-angle structure in one effective degree of freedom or by nonlinear modal sectors in several degrees of freedom. The channel is then reopened, pose is reconstructed, and accepted cycles must preserve internal recurrence and zero mean POE power. We demonstrate the principle on two ideal nonholonomic no-slip systems: a Chaplygin-sleigh / pendulum-driven car and a three-body extension. In the scalar case, POE closure is equivalent to the missing internal return condition, giving a theorem-backed computation of the NLM family. In the multi-degree case, POE closure remains necessary but must be completed by modal identity, internal return, dynamics consistency, same fixed passive architecture, and nonzero displacement. Natural locomotion becomes a design question: which passive architectures support no, one, or several certified NLM families?

Small aerial robots are particularly well-suited for search and rescue in confined and hazardous environments due to their agility, low cost, and ability to traverse through cluttered spaces that are inaccessible to larger platforms. However, enabling autonomous navigation in complete darkness remains a significant challenge, because small aerial robots cannot easily accommodate perception systems that demand substantial payload, power, or computation. In this work, we present a lightweight perception approach that combines a monocular event camera, a coded aperture lens, and an infrared dot projector to enable navigation in such conditions. The projected pattern, when imaged through the coded aperture, produces depth dependent blur signatures that implicitly encode scene geometry. We train a convolutional neural network to decode these signatures into dense depth maps using only synthetic data generated from a simple planar wall setup. Despite this minimal training regime, the model generalizes zero-shot to complex real-world scenes. Our system operates in real time at 20 Hz on a NVIDIA Jetson Orin Nano, demonstrating suitability for resource-constrained platforms. We further analyze the impact of different coded aperture designs on depth estimation performance. Our approach gives high accuracy (l1 error 7.0cm) upto 2.5m range (2.80% error). These results highlight the potential of combining structured illumination, coded optics, and event-based sensing for enabling robust perception and navigation in complete darkness.

The 3GPP V2X resource allocation framework defines two entity classes -- the base station and the vehicle UE -- and four modes across LTE and NR generations. We demonstrate that this binary taxonomy is structurally incomplete. Base station-led scheduling saturates at high-density traffic nodes, producing latency-tail failures that persist even when mean packet delivery ratios approach the service-class target. UE autonomy is categorically incapable of pre-emergence warning for occluded traffic participants and insufficient for large-scope cascading environmental hazards. We propose Mode 0, a new 3GPP V2X category whose defining entity is the Roadside Computing Unit (RCU) -- an infrastructure ensemble integrating elevated sensing (Seeing), sidelink communication (Speaking), and local computational evaluation (Thinking), owned by traffic management authorities. Mode 0 defines a subfamily spectrum from Mode 0a (all-passive UEs, the guaranteed minimum) through Mode 0c (all-active UEs, the optimal target). Convergent deployment evidence from Chinese national standards (DB11/T 2329.1-2024, T/ITS 0224.1-2025), China Unicom RS-MEC infrastructure, and European and US C-V2X programs confirms that both institutional sides are converging on the roadside traffic node without a coordination standard. A fifteen-run Multi-Agent Proximal Policy Optimization (MAPPO) simulation validates the architectural family: Mode 0a in shared-pool baseline sits at the analytical symmetric-Nash coordination floor; Mode 0c with demand separation achieves strict Pareto improvement for both traffic classes (M0 PDR 0.999, M1 PDR 0.998 at $ρ_{\rm pool} \leq 1$) and lifts the worst-TTI delivery ratio from near-zero to 0.601 -- the only configuration satisfying the latency safety requirement structurally. We call for a 3GPP study item on Mode 0 within the NR-V2X sidelink enhancement work programme.

This paper presents a novel passivity-based semi-autonomous attitude control framework, with a particular focus on attitude kinematics defined on the special orthogonal group $SO(3)$. While human-robot interaction facilitates the successful execution of complex tasks, ensuring stability of human-in-the-loop systems on the $SO(3)$ manifold remains a largely unsolved challenge. We first propose a new control architecture in which a multi-robot system preserves invariance of the average information fed back to the human operator through so-called stealthy control, and the human intervention is mediated through a virtual leader, which is coupled with the robots via a passivity-based attitude synchronization law. We then rigorously prove closed-loop stability of the proposed human-in-the-loop system under the assumption that the human behaves as a passive system. To support this analysis, simulation studies are conducted to identify the human operator as a dynamical system, and to examine passivity properties of the identified model.

Passive acoustic monitoring enables continuous, non-invasive biodiversity assessment across diverse ecosystems. The scale of these datasets has driven the adoption of machine learning, with supervised approaches showing strong performance. However, supervised methods require time-resolved annotated datasets, which remain scarce, especially in complex tropical soundscapes. We present PteroSet, a curated dataset of strongly annotated Neotropical bird vocalizations recorded in Puerto Asis (Putumayo) and Pivijay (Magdalena), Colombia, between 2023 and 2025. The dataset comprises 563 recordings (73.62 h) and 15,372 time-frequency annotations, including 6,702 events identified to the species level across 168 species. We release the annotations in a COCO-inspired JSON schema that unifies audio files, taxonomic categories, and labels for machine learning workflows. Beyond providing annotated data, PteroSet serves as a realistic benchmark that highlights key characteristics of tropical soundscapes, including acoustic co-occurrence and domain shift across recording sites. We provide a deep learning baseline for binary bird detection, demonstrating PteroSet's usability and the challenges it presents.

The rise of multi-modal large language models (MLLMs) is shifting remote sensing (RS) intelligence from "see" to "action", as OpenClaw-style frameworks enable agents to autonomously operate massive RS image-processing tools for complex tasks. Existing RS agents adopt a passive selection paradigm for tool invocation, relying on either full tool registration (Flat) or retrieval-augmented generation (RAG). However, in the massive and multi-source heterogeneous RS tool ecosystem, such passive mechanisms struggle to dynamically balance "context load" and "toolset completeness" throughout task reasoning, thus exhibiting inherent limitations: full tool registration triggers context space deficits during long-horizon tasks, whereas RAG retrieval may omit critical tools in essential steps. To overcome these bottlenecks, this paper redefines tool selection by arguing that the agent should act as an active explorer within the tool space. Based on this perspective, we propose RS-Claw, a novel RS agent architecture. By leveraging Skill encapsulation technology at the tool end, this architecture hierarchically structures tool descriptions, enabling the agent to execute on-demand sequential decision-making: initially selecting relevant skill branches by reading only tool summaries, then dynamically loading detailed descriptions, and ultimately achieving precise invocation. This active paradigm not only significantly liberates the agent's context space but also effectively ensures the accurate hit rate of critical tools during long-horizon reasoning. Systematic experiments on the Earth-Bench benchmark demonstrate that RS-Claw's active exploration mechanism effectively filters semantic noise and substantially frees up reasoning space, achieving an input token compression ratio of up to 86%, and comprehensively outperforming existing Flat and RAG baselines across complex reasoning evaluations.

Haptic rendering of viscoelastic materials that exhibit creep and stress relaxation is crucial for many applications, such as medical training with realistic biological tissue models. Fractional-order viscoelastic models provide an effective means of describing intrinsically time-dependent dynamics with few parameters, as these models can naturally capture memory effects. In this study, we present analyses of passivity and rendering performance for fractional-order viscoelastic models under finite-memory discretization. We derive closed-form expressions to ensure the passivity of haptic rendering with a fractional-order (FO) standard linear solid (SLS) model based on Grunwald-Letnikov derivative under short-memory discretization. We also provide symbolic expressions for the effective stiffness and damping of such FO-SLS models. The resulting passivity conditions constitute a unified framework that generalizes previously reported results for integer-order Kelvin-Voigt, Maxwell, and SLS models, since these results are special cases of the newly derived condition. Furthermore, we provide experimental validations of the theoretical passivity bounds and human-subject evaluations of perceived realism of FO-SLS models. Overall, this study establishes a unified theoretical framework and experimental evaluations for FO viscoelastic rendering under short-memory discretization.

While experience replay is essential for data efficiency in reinforcement learning (RL), standard methods treat the replay buffer as a passive memory system, prioritizing samples based on numerical prediction errors rather than their semantic significance. This approach stands in contrast to human learning, which accelerates mastery by actively abstracting fragmented experiences into behavioral rules. To bridge this gap, we propose Neuro-Symbolic Experience Replay (NSER), a framework that transforms experience replay from a passive sample reuse mechanism into an active engine for knowledge construction. Specifically, NSER addresses the incompatibility between linguistic reasoning and numerical optimization through a novel neuro-symbolic grounding pipeline. It leverages Large Language Models (LLMs) in a zero-shot manner to induce candidate behavioral rules from accumulated trajectories, grounds these insights into differentiable first-order logic representations, and utilizes the resulting symbolic structures to dynamically reweight the replay distribution. By allowing abstract knowledge to directly shape policy optimization, NSER achieves consistent superior sample efficiency and convergence speed across reactive, rule-based, and procedural benchmarks.

Embodied AI is a prominent research topic in both academia and industry. Current research centers on completing tasks based on explicit user instructions. However, for robots to integrate into human society, they must understand which actions are permissible and which are prohibited, even without explicit commands. We refer to the user-guided AI as passive intelligence and the unguided AI as active intelligence. This paper introduces RobotEQ, the first benchmark for active intelligence, aiming to assess whether existing models can comprehend and adhere to social norms in embodied scenarios. First, we construct RobotEQ-Data, a dataset consisting of 1,894 egocentric images, spanning 10 representative embodied categories and 56 subcategories. Through extensive manual annotation, we provide 4,944 action judgment questions and 1,157 spatial grounding questions, specifying appropriate robot actions across diverse scenarios. Furthermore, we establish RobotEQ-Bench to evaluate the performance of state-of-the-art models on this task. Experimental results demonstrate that current models still fall short in achieving reliable active intelligence, particularly in spatial grounding. Meanwhile, leveraging RAG techniques to incorporate external social norm knowledge bases can generally enhance performance. This work can facilitate the transition of robotics from user-guided passive manipulation to active social compliance.

Large Language Model (LLM)-driven conversational search is shifting information retrieval from reactive keyword matching to proactive, open-ended dialogues. In this context, Conversation Starters are widely deployed to provide personalized query recommendations that help users initiate dialogues. Conventionally, recommending these starters relies on a closed "exposure-click" loop. Yet, this feedback loop mechanism traps the system in an echo chamber where, compounded by data sparsity, it fails to capture the dynamic nature of conversational search intents shaped by the open world. As a result, the system skews towards popular but generic suggestions. In this work, we uncover an untapped paradigm shift to shatter this harmful feedback loop: harnessing user "free will" through active user expressions. Unlike traditional recommendations, conversational search empowers users to bypass menus entirely through manually typed queries. The open-world intents in active queries hold the key to breaking this loop. However, incorporating them is non-trivial: (1) there exists an inherent distribution shift between active queries and formulated starters. (2) Furthermore, the "non-ID-able" nature of open text renders traditional item-based popularity statistics ineffective for large-scale industrial streaming training. To this end, we propose Passive-Active Bridge (PA-Bridge), a novel framework that employs an adversarial distribution aligner to bridge the distributional gap between passively recommended starters and active expressions. Moreover, we introduce a semantic discretizer to enable the deployment of popularity debiasing algorithms. Online A/B tests on our platform, demonstrate that PA-Bridge significantly boosts the Feature Penetration Rate by 0.54% and User Active Days by 0.04%.

Inverse design of RF passive components from S-parameters is a high-dimensional, ill-posed problem, and prior generative approaches are limited to single-layer binary-metallization structures. This paper presents an inverse design approach that generates passive components from partial S-parameter inputs on an $8\times8$ mm board discretized at $64\times64$ pixels with sub-pixel grayscale metallization across 1-20 GHz. The framework generates two-layer copper layouts with vias, with hard physical constraints on feed locations enforced through annealed Langevin projection, flexible multi-modal conditioning on partial S-parameter specifications, port locations, dielectric properties, reference topology, and variable port placement. Candidate designs are generated in seconds, with surrogate-predicted S-parameters matching targets to within $0.77 \pm 1.28$ dB weighted mean absolute error. We validate the approach with two fabricated designs on RO4003C: a manufacturable alternative to a hairpin filter whose coupling gaps violate fabrication rules, and a combline bandpass filter designed from scratch given only target S-parameters.

Abrupt cable severance in multi-UAV slung-load transport redistributes load and changes the active constraint set, leaving limited time for fault diagnosis and reconfiguration. Existing controllers rely on coordinated force allocation, peer-state exchange, or fixed cable topology, and therefore lack a certified decentralized recovery mechanism for unannounced severance. We present a passive architecture that routes each vehicle's measured cable tension directly into its altitude thrust command, $T_i^{\mathrm{ff}}=T_i$, while a surrounding proportional-derivative, anti-swing, and projection cascade preserves local tracking feasibility. The main contribution is a conditional hybrid practical input-to-state-stability certificate that composes a slack-excursion-bounded taut-cable reduction, bounded post-severance Lyapunov jumps, inter-fault decay, and per-fault-cycle contraction $ρ\in (0,1)$ into an explicit recovery envelope under stated actuator, slack, and dwell assumptions. We validate the controller in Drake multibody simulation with five vehicles, a 10 kg payload, Kelvin-Voigt cables, Dryden wind, and single- and dual-severance schedules: the closed loop attains 0.312-0.328 m RMSE, 76.1-95.2 mm peak sag, and recovery within one payload-pendulum period. Disabling the identity inflates cruise error by 34-39% and peak sag by 3.6x-4.0x, identifying local tension feed-forward as the dominant passive recovery mechanism in the tested decentralized cascade.

We develop a physics-informed learning framework for energy-shaping control of port-Hamiltonian (pH) systems from trajectory data. The proposed approach co-learns a pH system model and an optimal energy-balancing passivity-based controller (EB-PBC) through alternating optimization with policy-aware data collection. At each iteration, the system model is refined using trajectory data collected under the current control policy, and the controller is re-optimized on the updated model. Both components are parameterized by neural networks that embed the pH dynamics and EB-PBC structure, ensuring interpretability in terms of energy interactions. The learned controller renders the closed-loop system inherently passive and provably stable, and exploits passive plant dynamics without canceling the natural potential. A dissipation regularization enforces strict energy decay during training, thereby enhancing robustness to sim-to-real gaps. The proposed framework is validated on state-regulation and swing-up tasks for planar and torsional pendulum systems.

Remote Photoplethysmography (rPPG) enables convenient non-contact physiological measurement. Existing Self-Supervised Learning (SSL) methods commonly fall into a correlation trap: they tend to learn the most dominant periodic signals in the data, such as high-energy motion or illumination noise, rather than the faint, true rPPG signal, leading to poor model generalization. To address this, we propose a new SSL paradigm, Physiological Causal Probing (PCP), which treats the latent rPPG signal as the underlying physical source and the resulting pixel chrominance variations as its visual manifestation. Its core idea is to shift from passive correlation learning to active, precise intervention: it intervenes on the video based on a proposed rPPG hypothesis, and verifies whether the post-intervention changes match physical expectations. We propose the Interv-rPPG framework to implement PCP: an rPPG extractor named PhysMambaFormer hypothesizes the rPPG signal, while a Controllable Physiological Signal Editor conducts precise chrominance-domain interventions on videos based on this hypothesis. Interv-rPPG validates the physical realism of the hypothesis through Falsifiability via Nulling' and Axiomatic Equivariance'. Our editor achieves precise editing of the rPPG signal by intervening in the low-frequency chrominance components of the video. Our method improves both in-domain and cross-domain performance on challenging datasets such as VIPL-HR and MMPD. Furthermore, it surpasses the supervised baseline in complex cross-dataset settings, while remaining competitive on clean datasets where the intervention mechanism may introduce slight residual chrominance noise. Extensive experiments, including diagnostic analysis of nuisance sensitivity, demonstrate that the PCP paradigm effectively resists motion and illumination artifacts.

Shared Control methods often use impedance control to track target poses in a robotic manipulator. The guidance behavior of such controllers is shaped by the used stiffness gains, which can be varying over time to achieve an adaptive guiding. When multiple target poses are tracked at the same time with varying importance, the corresponding output wrenches have to be arbitrated with weightings changing over time. In this work, we study the stabilization of both variable stiffness in impedance control as well as the arbitration of different controllers through a scaled addition of their output wrenches, reformulating both into a holistic framework. We identify passivity violations in the closed loop system and provide methods to passivate the system. The resulting approach can be used to stabilize standard impedance controllers, allowing for the development of novel and flexible shared control methods. We do not constrain the design of stiffness matrices or arbitration factors; both can be matrix-valued including off-diagonal elements and change arbitrarily over time. The proposed methods are furthermore validated in simulation as well as in real robot experiments on different systems, proving their effectiveness and showcasing different behaviors which can be utilized depending on the requirements of the shared control approach.

Always-on converter health monitoring demands sub-mW edge inference, a regime inaccessible to GPU-based physics-informed neural networks. This work separates spiking temporal processing from physics enforcement: a three-layer leaky integrate-and-fire SNN estimates passive component parameters while a differentiable ODE solver provides physics-consistent training by decoupling the ODE physics loss from the unrolled spiking loop. On an EMI-corrupted synchronous buck converter benchmark, the SNN reduces lumped resistance error from $25.8\%$ to $10.2\%$ versus a feedforward baseline, within the $\pm 10\%$ manufacturing tolerance of passive components, at a projected ${\sim}270\times$ energy reduction on neuromorphic hardware. Persistent membrane states further enable degradation tracking and event-driven fault detection via a $+5.5$ percentage-point spike-rate jump at abrupt faults. With $93\%$ spike sparsity, the architecture is suited for always-on deployment on Intel Loihi 2 or BrainChip Akida.

Embodiment is a significant keyword in recent machine learning fields. This study focused on the passive nature of the body of a biped robot to generate walking and running locomotion using model-based deep reinforcement learning. We constructed two models in a simulator, one with passive elements (e.g., springs) and the other, which is similar to general humanoids, without passive elements. The training of the model with passive elements was highly affected by the attractor of the system. This lead that although the trajectories quickly converged to limit cycles, it took a long time to obtain large rewards. However, thanks to the attractor-driven learning, the acquired locomotion was robust and energy-efficient. The results revealed that robots with passive elements could efficiently acquire high-performance locomotion by utilizing stable limit cycles generated through dynamic interaction between the body and ground. This study demonstrates the importance of implementing passive properties in the body for future embodied AI.

This article presents a deep learning-driven inverse design methodology for Doherty power amplifiers (PA) with multi-port pixelated output combiner networks. A deep convolutional neural network (CNN) is developed and trained as an electromagnetic (EM) surrogate model to accurately and rapidly predict the S-parameters of pixelated passive networks. By leveraging the CNN-based surrogate model within a blackbox Doherty framework and a genetic algorithm (GA)-based optimizer, we effectively synthesize complex Doherty combiners that enable an extended back-off efficiency range using fully symmetrical devices. As a proof of concept, we designed and fabricated two Doherty PA prototypes incorporating three-port pixelated combiners, implemented with GaN HEMT transistors. In measurements, both prototypes demonstrate a maximum drain efficiency exceeding 74% and deliver an output power surpassing 44.1 dBm at 2.75 GHz. Furthermore, a measured drain efficiency above 52% is maintained at the 9-dB back-off power level for both prototypes at the same frequency. To evaluate linearity and efficiency under realistic signal conditions, both prototypes are tested using a 20-MHz 5G new radio (NR)-like waveform exhibiting a peak-to-average power ratio (PAPR) of 9.0 dB. After applying digital predistortion (DPD), each design achieves an average power added efficiency (PAE) above 51%, while maintaining an adjacent channel leakage ratio (ACLR) better than -60.8 dBc.

Accurate process supervision remains a critical challenge for long-horizon robotic manipulation. A primary bottleneck is that current video MLLMs, trained primarily under a Supervised Fine-Tuning (SFT) paradigm, function as passive "Observers" that recognize ongoing events rather than evaluating the current state relative to the final task goal. In this paper, we introduce PRIMO R1 (Process Reasoning Induced Monitoring), a 7B framework that transforms video MLLMs into active "Critics". We leverage outcome-based Reinforcement Learning to incentivize explicit Chain-of-Thought generation for progress estimation. Furthermore, our architecture constructs a structured temporal input by explicitly anchoring the video sequence between initial and current state images. Supported by the proposed PRIMO Dataset and Benchmark, extensive experiments across diverse in-domain environments and out-of-domain real-world humanoid scenarios demonstrate that PRIMO R1 achieves state-of-the-art performance. Quantitatively, our 7B model achieves a 50% reduction in the mean absolute error of specialized reasoning baselines, demonstrating significant relative accuracy improvements over 72B-scale general MLLMs. Furthermore, PRIMO R1 exhibits strong zero-shot generalization on difficult failure detection tasks. We establish state-of-the-art performance on RoboFail benchmark with 67.0% accuracy, surpassing closed-source models like OpenAI o1 by 6.0%.

Rapid urbanization demands efficient monitoring of turbulent wind and pollutant dispersion, yet existing reconstruction and sensor placement strategies fail under realistic sparsity constraints. Here, we introduce Diff--SPORT, a diffusion-based framework that combines a generative diffusion prior with maximum a posteriori inference and Shapley-value attribution for high-fidelity flow reconstruction and optimal sensor placement. By training a diffusion prior model once over a domain, Diff--SPORT enables non-linear optimal sensor placement and near-real-time flow reconstruction from sparse measurements orders of magnitude faster than RANS or LES simulations, consistently outperforming state-of-the-art methods. The framework also extends, without algorithmic modification, to experimental passive scalar concentration dataset, a direct proxy for pollutant dispersion, measured in a 1:2400 scale water-flume model of the Beijing Haidian neighbourhood under realistic urban flow conditions. Shapley-guided sensor placement achieves up to 57% lower reconstruction error than randomly placed sensors at extreme sparsity, identifying compact and physically interpretable configurations. These results establish Diff--SPORT as a modular foundation offering a zero-shot alternative to retraining-intensive downstream strategies, supporting scalable urban flow monitoring for air quality management and resilient city design.

Selective State-Space Models (SSMs) such as Mamba have become central to long-sequence modeling. Still, their stability is poorly understood: their state-space coefficients are modulated online by a token-dependent gating signal, making the recurrence neither linear time-invariant nor classically nonlinear. We study continuous-time selective SSMs through passivity, dissipativity, and Input-to-State Stability (ISS), explicitly separating the selection signal $x(\cdot)$ from the driving input $u(\cdot)$. We obtain four results: exponential forgetting under strict dissipativity; a canonical $\mathrm{AUC}_{\mathrm{loc}}$ quadratic storage for the frozen-selection subsystem that accommodates discontinuous gating; a parametric LMI together with universal kernel constraints and "irreversible forgetting" under universal quadratic storage; and sufficient conditions for global ISS uniformly over admissible selection schedules. We then bridge to practice by deriving a sampled block LMI for the Mamba selective-scan core, which is used as a differentiable training-time regularizer. Across seven standard time-series datasets and four prediction horizons, the regularizer reduces sampled Mamba-core LMI violations by roughly $92\%$ in $28/28$ pairs at a clean-MSE cost of less than $0.018\%$. It improves internal Mamba passivity and state-norm diagnostics under injected perturbations. Our results turn classical control-theoretic tools into verifiable structural and training criteria for selective SSMs, while honestly scoping which guarantees transfer to a deep selective-scan architecture.