Rgb-Depth Cameras

ICP-based 3D Gaussian Splatting (3DGS) SLAM tracks in real time by registering incoming frames against map Gaussians, using each primitive's covariance for both rendering and registration. These two uses place conflicting demands on one covariance. The mapper shapes it to minimize photometric error, often flattening it against surfaces, while robust registration typically benefits from measurement uncertainty. We propose a dual-covariance parameterization. Each Gaussian keeps a single mean but holds two covariances: a rendering covariance optimized by the mapper, and a tracking covariance derived from an RGB-D sensor noise model. We further use the tracking covariances as Gaussian anchors for image corners, providing constraints in directions where depth geometry is weak. We evaluate on TUM RGB-D, ScanNet, Replica, and two outdoor sequences recorded with a RealSense D435i on wheeled and handheld platforms. We achieve robust tracking performance across multiple scenes and reduced odometry drift, while tracking at $\sim$ 60 FPS.

Current dense visual SLAM systems rely almost exclusively on 8-bit tonemapped Low Dynamic Range (LDR) inputs, limiting their robustness in extreme lighting where shadows and highlights trigger tracking drift and mapping collapse. Conversely, existing raw and High Dynamic Range (HDR) reconstruction pipelines operate strictly offline. They depend on Structure-from-Motion preprocessing and are not suited for large inter-frame motion. We present, to the best of our knowledge, the first online Gaussian SLAM framework that tracks and maps directly on single-exposure 16-bit linear HDR imagery. Our method rests on three core components: an architecture-agnostic HDR Gaussian Splatting module featuring an MLP-free logarithmic parameterization of Gaussian color features; a Reinhard range-compressed photometric objective; and structure-guided spatial gradient weighting. Combined, these components allow our approach to outperform a direct HDR adaptation of MonoGS in both trajectory and reconstruction accuracy, while rendering natively in linear scene radiance for post-rendering processing. The same formulation runs unchanged on standard 8-bit inputs, roughly halving the MonoGS baseline error. Furthermore, our HDR Gaussian module transfers seamlessly to SplaTAM, Gaussian SLAM, and DROID-W, eliminating all tracking failures these systems suffer on challenging illumination sequences. To enable this research, we introduce RawSLAM: a dataset of 10 real-world indoor sequences featuring 16-bit RAW imagery, aligned depth, IMU measurements, and external OptiTrack poses. Code and dataset will be made publicly available soon.

Conventional 3D Gaussian Splatting assumes a closed set of observations and long optimization schedules. Continual RGB-D mapping in contrast poses the problem that new observations arrive online, while previously reconstructed regions must be preserved. We present EliGSiR (Evidence-guided Load-adaptive Incremental Gaussian Splatting with Image Replay), a continual Gaussian mapper that controls how the available optimization budget is used as the reconstruction evolves. Map-Guided View Scheduling filters redundant incoming views and reconsiders retained views according to the current state of the map. Load-Adaptive Fidelity adjusts supervision resolution to the current mapping load instead of following a fixed resolution schedule. Targeted Geometry Growth separates depth supervision from Gaussian creation and adds geometric capacity only where repeated RGB-D observations indicate missing or misplaced structure. Together, these mechanisms adapt which views are optimized, how much image detail is used, and where the representation grows while mapping remains active. We evaluate EliGSiR on Replica, TUM RGB-D, ScanNet++, and real RGB-D sensor sequences, considering both the final reconstruction and the map available throughout acquisition. On TUM RGB-D fr3/long_office_household, EliGSiR reaches 21.52 dB with the same ground-truth mapping poses used by the controlled baselines, compared with 19.42 dB for SplaTAM. In the tracked-pose comparison, EliGSiR with live ORB-SLAM3 poses reaches 23.02 dB in 155.5 s, compared with 20.10 dB in 230.9 s for CaRtGS using its native tracker. We further evaluate reconstruction throughout acquisition and show how EliGSiR adaptive view scheduling, supervision fidelity, and geometry growth improve the use of the available mapping budget.

Visuomotor policies for multi-fingered dexterous manipulation are highly sensitive to camera viewpoint shifts. To achieve view invariance, recent methods increasingly rely on explicit 3D modalities like RGB-D or point clouds, which can introduce hardware dependencies, calibration requirements, and vulnerability to sensor noise during real-world deployment. In this work, we show that view-invariant control can be achieved without explicit test-time 3D sensing by encoding geometric knowledge into the visual representation during simulation. We present AnyViewDex, an asymmetric training pipeline that combines multi-view contrastive alignment with privileged 3D geometric supervision. By regressing absolute 3D object coordinates during simulated training, this auxiliary objective provides a geometric grounding signal that mitigates the spatial collapse of the globally pooled contrastive embedding. At deployment, the policy operates zero-shot using only uncalibrated monocular RGB and proprioception. We validate this approach across both reinforcement learning and student-teacher distillation. In hardware evaluation on an xArm7 with a 16-DoF LEAP Hand, AnyViewDex reaches 76.7% grasping success across eight unseen objects and six uncalibrated viewpoints (480 trials; 2,400 across all ablation conditions), indicating that geometrically grounded monocular policies transfer zero-shot without test-time depth. Project Page: https://anyviewdex.github.io/

Semantic occupancy prediction gives an embodied agent a voxel-level account of where space is free, occupied, and semantically meaningful. In RGB-D pipelines such as EmbodiedScan, the image encoder is often left as a default module, even though its features are the visual evidence later sampled into the 3D grid. We study this design choice directly. A central finding is that changing the 2D backbone improves occupancy accuracy more than several carefully designed occupancy architectures or modules. We keep the main RGB-D projection, depth branch, and occupancy head fixed, and replace only the image backbone. The compared encoders are CLIP-ResNet, CLIP-ViT, BLIP2, and DINOv2. Under the controlled setting, the measured mIoU changes substantially: DINOv2 obtains 30.55%, BLIP2 obtains 29.49%, CLIP-ViT obtains 24.33%, and CLIP-ResNet obtains 17.41%. The stronger encoders also exceed the original EmbodiedScan ResNet-50 baseline without modifying the downstream 3D fusion pipeline. Class-level results give a more detailed picture: DINOv2 is stronger on many layout and structural categories, whereas BLIP2 remains close on several object-centered classes. CLIP-ViT improves clearly over CLIP-ResNet, showing that the way CLIP features are exposed as dense tokens matters for voxel lifting. These results indicate that the image backbone is not a secondary engineering detail in embodied semantic occupancy, but a major source of variation in the final 3D prediction.

Physical AI relies on frequently-updated, latency-sensitive video stream to perceive, reason, and interact with the physical world, resulting in strict latency requirements with much higher data volumes that existing 5G networks cannot support. Goal-oriented communication (GoC) offers as a promising approach to solve this challenge by transmitting only task-relevant semantic representations. However, existing GoC frameworks were mainly evaluated in the simulations while their effectiveness has never been validated in a practical deployment of physical AI application. In this work, we develop an end-to-end GoC testbed for Physical AI, which connects a PiPER robot arm equipped with an RGB-D camera and a 5G modem to an NVIDIA Jetson AGX Orin edge server through a 5G OpenAirInterface network. We propose and implement three GoC frameworks that transmit 3D bounding boxes, 2D scene graphs, and 3D scene graphs, as three types of semantic representations, respectively. They share the common functional modules designed for closed-loop Physical AI applications, including semantic extraction, full stack 5G transmission, language model inference, digital twin validation, and robotic control. Extensive experiments on our testbed show that our GoC frameworks reduce the task completion time by up to 52.6% and improve task success probability by up to 45%, compared to the traditional framework that periodically transmits the raw image data. These results validate the practical effectiveness of our GoC framework and pave the way for efficient and reliable Physical AI applications over future 6G networks. Project website: https://sites.google.com/view/goc-physical-ai-testbed.

Recent advances in robot imitation learning have produced visuomotor policies that predict actions directly from visual observations. Yet visually similar scenes can require different actions as target position, object height, or contact geometry changes. Pretrained RGB features may map these geometrically distinct states to similar policy inputs, while simply adding depth requires the policy to learn RGB-depth correspondence from the same limited demonstrations used to learn control. We introduce StereoPatch, a patch-aligned RGB-depth representation that binds registered metric geometry directly to the RGB patches used for action prediction. On a shared 2-D patch grid, asymmetric cross-attention incorporates depth information into the corresponding RGB features before action decoding. The resulting StereoPatch Tokens provide a geometry-aware visual representation that can condition general visuomotor policies without changing their underlying learning objectives. Across six real-robot tasks, StereoPatch achieves higher closed-loop success than appearance-only, geometry-only, raw RGB-D, and late-fusion baselines. Additional experiments across three simulation suites evaluate compatibility across visuomotor policy architectures, spatial generalization, and operating limits. Results suggest that resolving control-relevant geometric ambiguity benefits from aligning depth directly with the visual features used for action prediction, rather than supplying it as an independent modality. Project page: https://aus.bot/research/stereopatch/.

Render--match--PnP relocalization establishes correspondences between query image pixels and 3D map points for camera pose recovery, but their potential to support dense depth estimation is often overlooked. To exploit this geometric information, we present RIDE, which estimates dense metric depth from a robot's RGB stream. Given a metrically scaled 3D Gaussian Splatting (3DGS) model, RIDE combines sparse metric depth observations derived from PnP-RANSAC inlier correspondences with the geometric prior of a pretrained video-depth model. To handle uneven and intermittent observations, it integrates global and local depth correction with temporal memory, supporting depth estimation through short observation gaps after metric scale initialization. Trained on public RGB-D videos, RIDE is evaluated on robot sequences without fine tuning. Experiments show improved depth accuracy and temporal consistency over scale-only calibration, demonstrating how localization geometry can support both pose recovery and dense robot perception.

Autonomous 3D active mapping requires a space robot to choose where to sense while building the geometry needed for navigation. Learned occupancy completion extends spatial context beyond the current field of view, but one predicted map often serves two planning roles: it scores expected surface gain and constrains collision-free motion. Unsupported occupancy can therefore distort both where the robot looks and where it believes it can travel. We study this coupled interface in a controlled closed-loop benchmark by holding the active-mapping system fixed and varying only its planner-facing occupancy across observation-only, learned, oracle-corrected, and ground-truth conditions. Improving occupancy accuracy does not monotonically improve closed-loop coverage: across 25 starts, planning with ground-truth occupancy reaches 70% of the learned baseline's final coverage 12.7 steps earlier on average, while increasing final coverage by only 0.031. Guided by this diagnosis, we introduce an observation-gated filter that retains completion in insufficiently observed regions and suppresses predictions only after repeated frustum exposure without nearby RGB-D support. The filter improves both targeted failure-prone starts without retraining or ground truth. These results motivate online revision of planner-facing geometry during autonomous intervals between communication windows. The current study assumes benchmark RGB-D observations and sufficiently accurate pose estimates; planetary sensing conditions and accumulated localization drift remain to be evaluated.

Workspace analysis measures where a robot can place its end effector. For visually guided manipulation, reachability alone is insufficient: a kinematically reachable target may not be visible in the specific pose required to reach it. The robot must then redirect its sensing or move its body to acquire a view, turning a perception limitation into additional motion. Existing humanoids largely inherit this limitation when copying human form factors. We introduce the visible-reachable workspace (VRW), a design-stage measure that conditions visibility on feasible reaching configurations and extends it to concurrent visibility of spatially separated work regions. We apply VRW by building a 31-DoF humanoid with independently actuated RGB-D cameras. On the same robot, camera articulation increases visible-reachable coverage from 38% to 97%. With actuated camera layouts, a second camera raises pairwise coverage from 0.45 to 0.95, while a third changes it only to 0.97. In a controlled two-target reach-and-grasp benchmark, our dual-actuated design reduces mean completion time by 17% and mechanical energy by 19% relative to the same robot with its cameras fixed. Hardware experiments demonstrate simultaneous observation and manipulation of front/back and left/right target pairs without torso reorientation. The results suggest that reachability becomes a more informative design quantity for perception-driven humanoid manipulation when it is evaluated together with the sensing configurations that make the reachable space observable. We will open-source all software and the humanoid hardware design. Our website is https://generalroboticslab.com/DukeHumanoidv2

We present Voxel-Grounded Online Instance Manager (VOIM), a training-free voxel-grounded instance manager that builds open-vocabulary 3D instance maps from RGB-D or from monocular RGB alone, a regime no prior training-free system addresses. Online systems typically segment object instances and label them at first detection, committing when evidence is weakest. VOIM instead defers label and instance decisions until soft evidence from unmodified, off-the-shelf perception has accumulated per voxel across views. We show that the mapping stage, rather than the particular perception models, carries the result: across four perception configurations on ScanNet++, varying the region descriptor, the detector label prior and the mask source, the map exceeds the strongest online RGB-D system, OVO-SLAM, by between 4.8 and 11.7 mIoU. Perception is not neutral, and substituting that baseline's own descriptor family costs 4.1 of the margin, yet the baseline carries the marginally better 2D descriptor (33.7 vs. 31.5 mIoU over three scenes) and still realizes the weaker map. Under a like-for-like protocol VOIM reaches 44.07 mIoU on ScanNet++ against 32.37, winning all ten scenes and both aggregations (pooled 33.31 vs. 25.97), and the same system runs unchanged to fully monocular RGB, matching that baseline pooled on Replica (27.80 vs. 27.50). The advantage is regime-specific: under Replica's all-classes scoring, matched inputs give a split result, 28.60 vs. 27.50 pooled against 24.59 vs. 30.11 on the per-scene mean. Room scale is label-limited and building scale drift-limited. Labeling does not run in real time, dominated by per-class detection over the full vocabulary. The maps export occupancy grids and resolve free-form queries to object instances.

Robotic perception from a single viewpoint is often limited by self-occlusion and incomplete surface visibility. This paper presents DARP(Dual-Arm Robotic Perception) https://doi.org/10.21227/rmv3-be47, a calibrated dual-arm RGB-D-IR dataset for object-centered robotic perception using two independently moving eye-in-hand manipulators positioned on opposite sides of a shared tabletop workspace. Each arm carries an Intel RealSense sensor that continuously records RGB, depth, and stereo infrared data while synchronized robot joint states are logged for pose recovery. Objects are placed without fixed poses or marked locations, and the acquisition procedure performs automatic localization, cross-arm confirmation, adaptive viewpoint generation, and continuous multimodal recording. DARP contains ten unique tabletop objects and preserves the original sensor recordings, robot-state logs, object-level metadata, and calibration information required to reconstruct camera trajectories in a shared metric frame. To evaluate the geometric consistency of the acquisition, we implement a deterministic multi-view fusion pipeline that converts calibrated RGB-D observations into complementary partial point clouds and measured surface meshes without using learned or generative completion methods. Evaluation on 224 held-out RGB-D keyframes comprising 1,563,466 three-dimensional query points yields a median point-to-mesh distance of 2.13mm and an RMSE of 4.04mm, with 96.56% of points within 10~mm of the measured-surface mesh. DARP is intended as a reusable resource for multi-view reconstruction, collaborative robotic perception, multimodal fusion, active perception, and future learning-based reasoning over partial object observations.

PixelGoal navigation specifies targets directly in the agent's camera view, providing a natural interface between high-level visual reasoning and low-level navigation. Depth can lift a visible target pixel into a metric PointGoal, but this estimate becomes unreliable under occlusion or sensor noise. Moreover, a PointGoal alone does not encode traversability or feasible paths around obstacles. We present OccPlanner, a goal-aware occupancy-conditioned diffusion planner that learns complementary egocentric goal and planning-oriented 3D representations through metric target and occupancy prediction, respectively. These representations condition a diffusion trajectory module to generate target-directed, obstacle-aware trajectories. For scalable geometric supervision, we introduce L3ROcc, which converts monocular RGB navigation videos into aligned 3D occupancy and trajectory annotations. We train OccPlanner on L3ROcc-processed InternData-N1 and evaluate it in closed-loop simulation across four unseen InternScenes categories and two goal-distance ranges. Across all eight settings, OccPlanner substantially outperforms existing open-source PixelGoal approaches and achieves competitive performance against PointGoal planners with direct metric-goal inputs.

Human-to-robot (H2R) object handover is a fundamental capability for human-robot collaboration, yet progress is hindered by the scarcity of large-scale, human-centric datasets and the significant sim-to-real gap. To address these challenges, we introduce Hand2Bot, an RGB-D video dataset that provides rich contextual information such as body posture and facial expressions, specifically collected for handover scenarios with real-world noise patterns. We further propose PassGen, a generative pipeline that leverages stable video diffusion and an Intention-Aware Temporal Face Encoder to synthesize realistic handover sequences while ensuring hand-object consistency. To bridge the sim-to-real gap, we implement a morphology-based depth editing strategy that replicates realistic sensor noise found in physical depth maps. Experimental evaluations demonstrate that our framework achieves high intention identification accuracy and low false trigger rates in both ablation studies and real-world deployment on a physical robot platform. Our results confirm that training on PassGen allows for robust zero-shot transfer and earlier intention anticipation compared to traditional hand-centric baselines, effectively enabling socially aware robotic behavior in shared workspaces.

Volumetric video streaming turns privacy into a 3D, multi-view problem. Unlike ordinary video, where sensitive content can often be redacted frame by frame, RGB-D volumetric pipelines capture people, rooms, and personal objects from multiple cameras and fuse them into a shared 3D representation. A private object missed in one view, or only partially removed before fusion, can therefore reappear in the reconstructed scene. This creates a privacy challenge for 3D telepresence, education, entertainment, and immersive applications: private content should be removed before raw visual and geometric data leave the camera side, while the public part of the scene should remain useful for real-time reconstruction. Existing volumetric streaming systems mainly optimize reconstruction, data movement, and latency, while privacy-preserving vision methods are designed for single-camera, single-frame images and do not directly address calibrated multi-view RGB-D fusion. We present InViStream, a real-time "privacy-from-source" system designed for this setting. InViStream addresses three challenges in volumetric capture: private objects may appear differently across views, RGB masking alone can leave geometric privacy leakage in depth, and public/private instances of the same class must be separated consistently before cloud-side fusion. To address these challenges, InViStream combines object detection with depth-aware masking, propagates public/private decisions across calibrated views, and fuses only sanitized point clouds. We evaluate InViStream on synthetic and real RGB-D scenes, including offices, conference rooms, living rooms, and settings with multiple public and private people and objects. InViStream achieves synthetic Dice/Recall of 0.799/0.891 and real Dice/Recall of 0.792/0.908, with synthetic SSIM above 0.98 and real-time streaming above 30 FPS.

Creating photorealistic and temporally coherent animatable human avatars from RGB videos remains challenging. Current methods struggle to capture realistic cloth dynamics, producing over-smoothed appearance or severe artifacts on out-of-distribution poses. This limitation stems from a fundamental oversight: existing approaches neglect the temporal causality inherent in cloth physics, where current states emerge from previous states through temporal evolution rather than instantaneous skeletal configurations alone. Without explicit modeling of this causal structure, networks learn pose-appearance correlations instead of motion evolution, leading to poor generalization. We introduce a dual-stream autoregressive framework that explicitly models both observable geometric information and implicit internal state. The geometric stream propagates surface displacement from the previous frame, while the state stream fuses current features with historical states retrieved from a memory bank. Motion-adaptive aggregation handles spatially-varying dynamics, and adaptive regularization balances smoothness with flexibility. Experiments on challenging datasets demonstrate significant improvements in rendering quality, temporal consistency, and generalization to motion patterns beyond training distributions, validating that dual-stream temporal modeling enables realistic cloth dynamics.

This work presents a visual odometry (VO) system that leverages image edge features. Edges are spatially expressive cues commonly present across diverse environments, offering rich textural and structural information. However, existing edge-based VO methods often fail to fully exploit this potential. To this end, we introduce a novel feature representation termed \textit{organized edges}, which transforms disjoint edge pixels into sequentialized clusters, enabling more effective retention and utilization of the underlying textural and structural information. Another nice property of this formulation is that organized edges can perform edge-level association across multiple frames, enabling the establishment of a co-visibility graph. To achieve precise and efficient pose estimation, we propose a range of particularly designed tracking and joint optimization methods based on the characteristics of organized edges. For tracking, we formulate edge-wise rather than pixel-wise residuals to achieve robust and accurate inter-frame registration. For joint optimization, we introduce a novel shape-preserving edge-fitting method and an organized edge-based Bundle Adjustment (BA) approach, which decomposes the traditional BA problem into fitting and registration to preserve the structural integrity. Based on these novel techniques, we develop a complete VO system that exclusively employs organized edge features, achieving efficient tracking and precise local mapping. Extensive experiments demonstrate its accuracy and robustness in indoor environments, outperforming or achieving comparable performance to state-of-the-art methods. The source code is publicly available at https://github.com/liumingrui814/ROEVO

Understanding 3D scenes from egocentric video is fundamental for robotics and autonomous navigation, yet rapid viewpoint changes and partial occlusions make building structured representations challenging. Existing 3D tracking and scene graph construction methods primarily address explicit interactions or assume static scenes, limiting their ability to capture complex dynamics. We introduce EgoTrack3D, a modular framework that reconstructs and maintains a dynamic 3D scene representation directly from egocentric RGB video. The framework lifts 2D segmentation masks into a global 3D coordinate frame, using a point-based motion scoring mechanism alongside a voxel-based merging heuristic to associate object tracks. EgoTrack3D maintains accurate representations over time, achieving an 11% improvement in percentage of correct locations (PCL) relative to the strongest baseline on the Aria Digital Twin (ADT) dataset, while addressing the more general setting of persistent 3D tracking for both static and dynamic objects. Furthermore, to demonstrate the system's robustness under degraded conditions that simulate real-world deployment constraints, we replace dense depth maps with sparse 3D bounding box estimation and integrate interaction-guided dynamic association, enabling EgoTrack3D to maintain accurate spatial representations despite noisy observations.

We study the problem of inserting new furniture into indoor scene images. Under masked single-view 2D image-plane conditioning, however, the physical scale of the inserted furniture relative to the scene cannot be uniquely determined, making physically grounded furniture placement underdetermined from image evidence alone. We therefore reformulate the task as a combination of 3D pose inference and geometry-guided image generation, where estimating a geometrically plausible 3D placement is essential for reliable synthesis. To this end, we propose a two-stage framework. For 3D placement, we introduce GOPI, a generation-oriented 3D pose inference framework that addresses the underdetermined nature of single-view furniture insertion through data-driven iterative inference, producing geometrically plausible object placements. For image generation, we develop a geometry-guided conditioning strategy that projects the inferred 3D pose into the image plane as a pixel-aligned constraint, enforcing consistency between the synthesized image and the underlying 3D geometry. Experimental results validate the proposed framework from both 3D pose estimation and image synthesis perspectives. For 3D placement, GOPI produces poses with stronger geometric feasibility and better consistency with reference layouts than direct regression and vanilla baselines. For image synthesis, our method preserves alignment with the projected 3D geometry across different furniture scales, showing stable projection-generation alignment across the tested furniture scales.

Our primary objective is to advance video object counting in crowded scenes, aiming to robustly count all instances of a target category based on given text or visual prompts. Existing methods rely on RGB information, limiting their discriminative ability in crowded and occluded conditions. To address this, we propose a Depth-Guided Detector (DG-Det) along with a general post-processing pipeline. By integrating depth cues with multi-scale RGB-D cross-attention and explicit occlusion prediction, our method enhances spatial understanding and achieves robust detection in crowded and occluded scenes. Furthermore, we introduce a unified de-duplication framework to eliminate cross-frame redundant counting. To facilitate future research, we also release a new RGB-D Video Object Counting dataset featuring depth information and multiple object categories persequence. Extensive experiments demonstrate that our method achieves a 62.01% reduction in MAE compared to existing baselines, and also produces consistent improvements in RMSE. We provide the source code at https://github.com/streamer-AP/DG-Net and the dataset at https://huggingface.co/datasets/aerospace123/RGBD-VideoCount.

World models enable agents to perform forward rollout and planning without real-world interaction. However, their application in open-world embodied intelligence remains limited by the high cost of action annotations and the heterogeneity of action spaces across platforms. Recently, latent action models (LAMs) have alleviated this bottleneck by learning action representations directly from unlabeled human videos in a self-supervised manner. Nevertheless, most existing LAMs rely on single-view inputs and operate primarily in 2D pixel space, raising a fundamental question: can simply incorporating multi-view videos into LAM training endow the learned latent actions with 3D-aware perception? Our study shows that the answer is negative. The primary reasons lie in future-frame appearance leakage as well as inter-camera appearance discrepancies and viewpoint variations. To address these issues, we propose LAWM-3D, which introduces three tightly coupled key designs: (1) a multi-view invariant unified action tokenization scheme for learning 3D-aware latent actions; (2) a geometric alignment constraint that anchors intermediate encoder features to a pretrained 3D foundation model, thereby explicitly providing cross-view geometric correspondences; and (3) a non-injective RGB-D joint reconstruction objective that prevents shortcut learning from future-frame appearance information, forcing the LAM to focus supervision on motion cues with geometric significance. Importantly, these components are not simply stacked but are tightly coupled through a unified motivation. Built upon a two-stage paradigm of large-scale human video pretraining followed by robot fine-tuning, extensive experiments demonstrate that the proposed 3D-aware latent actions significantly improve world model performance, achieving SOTA results in generation quality, physical consistency, and generalization ability.

Humanoid robots have the potential to perform dexterous manipulation in human environments, yet acquiring diverse and generalizable skills remains costly due to expensive hardware data collection and labor-intensive annotation. Recent advances in video generative models provide a promising opportunity to synthesize rich manipulation experiences from visual observations, but transferring such imagined behaviors into executable whole-body humanoid skills remains largely unexplored. In this work, we present RoboReact, a framework that automatically synthesizes whole-body humanoid manipulation skills from a single egocentric RGB-D observation. RoboReact generates human manipulation videos, extracts geometry-preserving interaction keyframes through depth-aware 3D reconstruction, and retargets them to high-DoF humanoid platforms while preserving hand-object interaction geometry. To bridge the gap between imagined plans and physical execution, RoboReact performs online object-centric re-grounding and leverages a vision-language model-guided refinement loop to adapt skills under geometric mismatch and execution deviations. The refined skills are executed through a whole-body controller, enabling coordinated whole-body manipulation and dexterous interaction. Experiments on real humanoid robots demonstrate that RoboReact generalizes across diverse object configurations and robustly recovers from execution disturbances without requiring teleoperation or human demonstrations. These results highlight the potential of combining generative models, vision-language reasoning, and closed-loop control for scalable humanoid skill acquisition.

Simultaneous localization and mapping (SLAM) based on Neural Radiance Fields (NeRF) enables dense, continuous scene reconstruction. However, existing systems operating with limited online resources struggle to simultaneously construct two types of constraints, namely, compact yet discriminative spatial constraints derived from scene representations and persistent temporal constraints derived from historical observations. To address this challenge, we propose CHOW-SLAM, a dense RGB-D SLAM framework that explicitly constructs these complementary spatial and temporal constraints. Spatially, we propose a compact parametric-hash (P-H) hybrid representation that organizes components based on planes and grids across scales in P and H branches. A unified multi-output decoder further aligns the ray termination distributions induced by TSDF and density, preserving geometry and appearance under a compact parameter budget. Temporally, we propose a complementary overlap-window strategy to prevent optimization from being dominated by short-term overlap or weakly related historical observations. Within a fixed budget, the strategy retains recent frames, selects high-overlap local frames, and introduces temporally distributed historical keyframes. Loss-aware keyframe insertion and bundle adjustment scheduling further adapt optimization to tracking quality. In addition, ORB-based tracking and geometric pose estimation are used for pose initialization, followed by neural rendering optimization to improve tracking stability. Extensive evaluations on multiple datasets demonstrate that CHOW-SLAM outperforms state-of-the-art methods in both scene reconstruction quality and camera tracking accuracy. The source code is available at https://github.com/jinjidexiaohuoban/CHOW-SLAM.

While depth sensors have the potential to complement RGB data for affordance segmentation in wearable robots, their usage seems to remain underexplored. The paper proposes two approaches: a reformulated version of hardware-aware neural architecture search, endowed with a newly designed search space to integrate depth (D) information into small-sized deep networks, and a dedicated fine-tuning approach, including a preprocessing layer to merge depth information with RGB data and make it compatible with conventional architectures. In both cases, those methods aim to generate solutions that benefit from modern (portable) hardware accelerators and overcome existing tiny-like approaches, which often fail to tackle critical scenarios due to the severe constraints set by the supporting hardware. Extensive experiments on a pair of real-world datasets demonstrate the effectiveness of the proposed method as compared with existing solutions. The approach presented in the paper generates, in most cases, solutions that identify the Pareto optimal front to balance generalization performance and hardware requirements. The paper also describes the supporting prototype, including a Jetson Nano board and a RealSense RGB-D camera. When considering the energy profile of the device, the overall system can attain real-time performances within an energy budget that is compatible with standard batteries, such as those used in smartphones.

We introduce RDVSv2, a large-scale benchmark for RGB-D video salient object detection (RGB-D VSOD) with dense frame-level annotations. Existing datasets in this emerging field are often limited in scale and annotation quality, while also relying on less geometry-consistent depth cues. To address these limitations, RDVSv2 is built from publicly accessible stereoscopic online videos and contains 249 video sequences with 29,077 annotated frames. It includes depth maps derived from stereoscopic videos, together with frame-wise salient object masks annotated with eye-tracking guidance. Compared with existing datasets, RDVSv2 is much larger in scale and covers more diverse and challenging scenarios. In addition, we establish a strong baseline for RGB-D VSOD based on Segment Anything Model 2 (SAM2). Specifically, we employ a parameter-efficient fine-tuning (PEFT) strategy to adapt the SAM2 encoder to jointly encode RGB, depth, and optical flow cues. Extensive experiments show that RDVSv2 is substantially more challenging for existing RGB-D VSOD methods. Meanwhile, the proposed baseline achieves state-of-the-art results on RDVSv2 and existing RGB-D VSOD benchmarks. We hope that RDVSv2 and the provided baseline will serve as useful resources for future research on RGB-D VSOD and related multi-modal video understanding tasks. Our dataset and code will be available at https://github.com/ltynick/RDVSv2.

Robust object 6D pose tracking is critical for robotic systems operating in dynamic and occluded scenes. Per-frame estimators are accurate but computationally expensive, while current trackers struggle with fast motion and complete occlusion due to their reliance on continuous visibility. To address these challenges, we present RRTrack, an efficient, recoverable object 6D pose tracker that enables robust tracking through fast motion and target disappearance--reappearance. RRTrack introduces a 2D--6D closed-loop tracking strategy that integrates memory-based video object segmentation (VOS) with 6D pose refinement. The 2D branch maintains target localization, and the 6D branch verifies geometric consistency before memory updates. In addition, a DINOv2-based dual-bank template matching module is developed to recover lost targets by jointly exploiting offline synthetic templates and online observation anchors while maintaining real-time efficiency. We also introduce a synthetic RGB-D benchmark comprising three robotic scenarios with fast motion and full occlusion. Experimental results on the synthetic benchmark demonstrate that RRTrack improves equal-subset mean ADD-S AR by 66.3% and ADD-S AUC by 65.7% over FoundationPose while achieving 55.2 FPS. Real-world experiments further validate the robustness of RRTrack under noisy sensing conditions. Project page: https://github.com/7kevin24/RRTrack

Real-time 6-DoF object pose tracking is essential for many robotics applications, and several approaches exist. Yet even today's approaches remain unreliable under temporary full occlusions and rapid object motions. Once tracking is lost, most methods struggle to detect the failure and recover automatically, often requiring manual re-initialization. In this paper, we address the problem of robust model-based 6-DoF tracking of unseen objects from RGB-D data, especially in scenarios with occlusion and fast motion. We propose a novel method that combines efficient learning-based keypoint matching with optimization-based alignment and introduces a novel failure detection and recovery module. Our system monitors pose reliability, detects tracking divergence or occlusions, and performs a global re-detection and pose estimation step that robustly verifies recovery candidates before resuming tracking. Our evaluation on standard tracking benchmarks and on a new dataset of occluded and fast-moving scenes shows that our method matches state-of-the-art accuracy on easy tracking sequences, maintains high tracking speed at 57.6 frames per second, and provides the most robust tracking performance under challenging conditions. Thus, we believe that our approach is a relevant step forward in robust 6-DoF object tracking from RGB-D data.

Unmanned aerial vehicle (UAV) communication is expected to support a wide range of low-altitude applications in 6G mobile networks. However, traditional statistical channel models provide limited accuracy in specific environments, while deterministic methods such as ray tracing usually rely on accurate three-dimensional environment models and involve high computational complexity. Existing multimodal channel prediction approaches mainly focus on large-scale metrics such as path loss, and remain insufficient for modeling small-scale parameters. To address these limitations, this paper proposes PanoLAMP, a Panoramic perception and vision-language model-based Low-Altitude Multipath Prediction framework. It adopts a pretrained vision-language model as the backbone and captures the propagation environment features through panoramic RGB-D observations collected at both the transmitter and receiver to predict the delay, power, azimuth angle, and zenith angle offset relative to the line-of-sight path. Experiments are conducted on a synthetic dataset containing 18,949 UAV-vehicle links across seven UAV altitudes. Experimental results show that the proposed method consistently outperforms representative baselines in both multipath parameters and statistical metrics, and demonstrates stronger generalization across different flight heights.

RGB-D semantic segmentation has achieved remarkable progress, yet most models assume that RGB and depth are always available. In practice, failures or occlusions of surveillance sensors often remove one modality. Although RGB or depth alone can contain sufficient cues, models trained only on full-modality inputs fail to exploit the remaining modality once one is missing, causing severe degradation. We tackle this issue with a simple continued-training paradigm, \emph{Condition Dropout (ConD)}, which mitigates degradation while preserving full-modality accuracy. Starting from a pretrained RGB-D model, ConD adds a second stage that randomly simulates complete, RGB-missing, and depth-missing inputs, freezes the original encoders, and trains copied encoders with zero-initialized feature injection. Experiments on NYU-Depth V2 and SUN RGB-D show that ConD improves robustness under missing modalities and even yields slight gains when modalities are complete. Our code will be made publicly available upon acceptance.

Robotic grasping requires accurate coordination between visual perception, object localization, inverse kinematics, and hand control. However, when movements planned in simulation are executed on a physical robot, the sim-to-real gap can cause small positioning errors that prevent successful grasping. In our previous work, we introduced a low-cost haptic calibration method that improved 2D reaching accuracy of the humanoid robot NICO. In this paper, we extend this approach from reaching to tabletop object grasping by adding YOLO-based object and hand detection, stereo vision-based localization using the robot's built-in low-resolution fisheye cameras, and task-specific corrections for grasp execution. Together, these components form a novel calibration-based grasping pipeline that does not require RGB-D cameras, motion capture, or external tracking systems. We also implemented a visual feedback model that aligns the robot hand with the detected object before grasping. Our results show that the fully nonlinear calibration model achieved the best performance inside the calibrated area, while the visual feedback model achieved the highest overall grasping success across the full tabletop workspace.

Robots in cluttered indoor spaces often fail not because they cannot generate collision-free paths, but because a fixed safety margin is mis-calibrated: conservative margins cause detours and timeouts, while permissive margins lead to near-boundary shortcuts under perception bias. Diffusion-based planners propose diverse trajectory candidates from egocentric RGB-D, yet reliable selection remains the bottleneck. We propose a context-conditioned safety critic that learns an adaptive clearance preference for ranking diffusion proposals, decomposed into three complementary terms: (i) a safety term with a clearance-budget penalty and a control-barrier-function residual for waypoint- and transition-wise safety, (ii) an efficiency term combining a smoothness penalty with a safety-gated detour-ratio penalty that avoids detours without incentivizing risky shortcuts, and (iii) a distance-constraint matching term that anchors the learned budget to realized ESDF clearances to prevent margin collapse. We train the critic with privileged ESDF geometry in simulation and distill it into a perception-only selector via a two-stage teacher-student procedure. On PointGoal navigation in HM3D and MP3D, including cross-dataset transfer, our method achieves the highest success rate (SR) and success weighted by path length (SPL) among strong diffusion, optimization, and RL baselines. Trained purely in simulation, it transfers to a Unitree G1 humanoid and navigates cluttered indoor scenes without task-specific tuning.

Egocentric devices, such as wearable front-facing cameras, provide a unique perspective for capturing the continuous interaction between a human viewer and the surrounding environment. A holistic and efficient multimodal model capable of reconstructing this 4D representation is therefore highly desirable. However, existing approaches often rely on auxiliary inputs such as pre-computed camera trajectories, treat scene perception and human ego-motion modeling as separate problems despite their strong interdependency, and suffer from slow inference time. To address these limitations, we present ReViV, the first unified framework for holistic egocentric 4D reconstruction that extracts both viewer and view dynamics from a single monocular RGB video. We formulate the task as learning the full joint probability distribution over multimodal signals, including RGB video, camera trajectory, gaze direction, full-body motion, hand motion, and depth. Powered by a Masked Generative Egocentric Transformer, ReViV operates within a single feed-forward architecture to simultaneously reconstruct the temporally consistent 4D reconstruction across the viewer and the view with fast inference speed. Extensive experiments on diverse benchmarks, including HoloAssist, HOT3D, ARCTIC, Aria Digital Twin, and TACO, demonstrate that ReViV achieves state-of-the-art accuracy and efficiency across holistic ego-body, hand, and gaze reconstruction, camera tracking, while maintaining highly competitive egocentric depth estimation without relying on heavy task-specific priors. Code and models are fully open-sourced: https://reviv4d.github.io/.

Understanding physical human-robot and human-human interactions is a challenging yet emerging topic in 3D vision. While most existing methods rely on skeleton sequences--effective in low-light and privacy-sensitive environment--they face two major challenges: 1) learning and effectively exploiting interaction cues from skeletal data, and 2) compensating for the lack of visual information absent in skeletons alone. To address these challenges, we propose skeletal token alignment and rearrangement (STAR) for human-robot and human-human interaction recognition. It learns interaction-specific skeleton features and enriches them using visual cues by aligning skeleton and RGB video representations in a shared latent space. Specifically, STAR consists of three key components. First, we design a skeleton encoder that captures fine-grained interdependencies using Entity Rearrangement (ER) and Interactive Spatiotemporal Tokens (ISTs). Second, we present Visual Interaction Encoding that introduces a Focus on Interactions (FoI) strategy to attend to spatiotemporal regions relevant to interactions in RGB videos. Finally, these representations are aligned via a contrastive learning objective, with a refinement head further refines predictions. During training, STAR leverages both skeleton and RGB video data to learn robust, discriminative interaction representations. At inference time, it operates on skeletons alone, retaining visual-informed benefits while preserving skeleton-only efficiency. Extensive experiments on Chico, HARPER, NTU Mutual 11 and 26 datasets consistently validate our approach by demonstrating superior performance over state-of-the-art methods. Our code is publicly available at https://github.com/Necolizer/STAR.

Teleoperating a robotic manipulator in industrial environments demands precision that camera-based interfaces alone struggle to deliver. The operator must align the end-effector with a target in clutter, under limited depth perception, and without colliding with the surrounding structures. This paper presents a shared-autonomy framework that assists the operator throughout this process. A single RGB-D camera captures the operator's arm motion and hand gestures without wearables, fiducials, or a calibration stage. The intended target is specified by a free-form text prompt, grounded by a vision-language model in the robot's gripper camera, and tracked across its onboard cameras by a promptable video-segmentation model, resulting in a grasp frame continuously separated from the obstacle map. Every commanded motion is executed by a GPU-accelerated model-predictive controller that enforces self- and environment-collision avoidance against an online volumetric reconstruction, while a potential field corrects the operator's reference toward the grounded target during the final approach. An autonomous mode can be gesture-triggered to complete the grasp on the same target without a separate perception pipeline. The framework is validated on a quadruped mobile manipulator. The interface achieves a positional RMSE of 59 mm relative to motion-capture ground truth, and the controller keeps the arm at least 18 cm from obstacles while the operator deliberately commands the arm into them by 6 cm. In an industrial valve manipulation and a pick-and-place task, the full framework succeeded in all trials, while ablating either the collision or the assistance module produced failures through complementary mechanisms, and autonomous execution succeeded in four of five trials per task.

We propose a splat-based 3D scene reconstruction method from RGB-D input that effectively handles extreme motion blur, a frequent challenge in low-light environments. Under dim illumination, RGB frames often suffer from severe motion blur due to extended exposure times, causing traditional camera pose estimation methods, such as COLMAP, to fail. This results in inaccurate camera pose and blurry color input, compromising the quality of 3D reconstructions. Although recent 3D reconstruction techniques like Neural Radiance Fields and Gaussian Splatting have demonstrated impressive results, they rely on accurate camera trajectory estimation, which becomes challenging under fast motion or poor lighting conditions. Furthermore, rapid camera movement and the limited field of view of depth sensors reduce point cloud overlap, limiting the effectiveness of pose estimation with the ICP algorithm. To address these issues, we introduce a method that combines camera pose estimation and image deblurring using a Gaussian Splatting framework, leveraging both 3D Gaussian splats and depth inputs for enhanced scene representation. Our method first aligns consecutive RGB-D frames through optical flow and ICP, then refines camera poses and 3D geometry by adjusting Gaussian positions for optimal depth alignment. To handle motion blur, we model camera movement during exposure and deblur images by comparing the input with a series of sharp, rendered frames. Experiments on a new RGB-D dataset with extreme motion blur show that our method outperforms existing approaches, enabling high-quality reconstructions even in challenging conditions. This approach has broad implications for 3D mapping applications in robotics, autonomous navigation, and augmented reality. Both code and dataset are publicly available on https://github.com/KAIST-VCLAB/gs-extreme-motion-blur.

This paper presents MAGiSt3R, a multi-agent 3D reconstruction framework performing reconstruction and camera tracking for monocular RGB videos at almost 10 FPS. MAGiSt3R relies on a feed-forward model from the 3R family to process RGB videos and regress local point maps, and on a merging model, MAGMA, that combines local maps at both intra-agent and inter-agent levels to obtain the final global point map. Furthermore, MAGiSt3R performs pose graph optimization to mitigate cumulative camera drift occurring along the feed-forward pipeline. We evaluate MAGiSt3R on both synthetic and real-world datasets, demonstrating its superior reconstruction and camera tracking accuracy compared to state-of-the-art approaches.

Natural language interaction provides an intuitive way for non-expert users to communicate with robotic platforms. However, transforming user requests into executable navigation actions remains a challenging task, requiring the integration of language understanding, environment perception, and autonomous navigation. This work presents a language-driven navigation framework that enables mobile robots to interpret user requests in natural language to move the robot to a destination and autonomously navigate towards it. The framework is composed of modular ROS 2 components that cooperate to transform natural language instructions into navigation actions. Given a natural language request referring to a target in the environment (e.g., "go to the mail box"), the system identifies the referenced object, estimates its position using RGB-D data, and generates a navigation goal, which is then executed through the ROS 2 Nav2 navigation stack. The ROS 2-based implementation facilitates portability across different robotic platforms, requiring only the configuration of the corresponding topics and services. The system is evaluated in both simulation and real-world scenarios using a TurtleBot3 Waffle and a Unitree Go2 robot with a RealSense camera. Experimental results show that the framework successfully interprets both direct commands and contextual requests, generates meaningful natural-language feedback, and navigates towards the desired target. These results demonstrate the feasibility of combining semantic perception and autonomous navigation to provide an intuitive human-robot interaction paradigm. Code will be released as open source upon acceptance.

Intelligent Transportation Systems deployed on highways predominantly rely on conventional RGB cameras for traffic perception and vehicle tracking. However, highway environments present unique challenges: the absence of artificial lighting infrastructure, combined with high vehicle velocities, results in severely degraded perception performance under low-light conditions. Specifically, nighttime scenarios suffer from motion blur, insufficient exposure, and poor signal-to-noise ratios, which catastrophically impair the reliability of RGB-based sensing systems. To address these limitations, we propose a novel Joint Event-RGB Adaptive Tracking (JEAT) framework. Unlike existing multi-sensor trackers constrained by rigid, hard-coded prioritization, JEAT merges asynchronous event streams and RGB frames into a unified joint data association optimization. By employing an Adaptive Extended Kalman Filter to continuously estimate measurement noise via NIS statistics, the framework dynamically weights and fuses both modalities, optimally harnessing event streams during dark or high-speed motion while leveraging RGB frames under bright or static conditions. Furthermore, given the absence of publicly available datasets tailored for event-based highway perception with diverse environmental conditions, we present SEHN, a large-scale synthetic dataset generated using the CARLA simulator. Our dataset encompasses diverse environmental conditions (daytime, nighttime, nighttime with out artificial lighting) and varying traffic densities, providing synchronized RGB imagery and event streams to facilitate multi-modal fusion research. Our code and datasets will be available at https://github.com/haidongwang96/SEHN.

Decomposing outgoing surface radiance into material and illumination during inverse rendering is essential for applications such as relighting and augmented reality, yet it is severely ill-posed since multiple combinations can result in the same observed colour. Capturing an object under multiple lighting conditions usually helps resolve this ambiguity as it constrains the optimization towards correct solutions. In this work, we explore the potential of reconstructing rigidly moving objects -- which provides observations of diverse light-surface interactions -- to resolve the material-lighting ambiguity in inverse rendering. For this purpose, we introduce a relightable approach that marries object tracking and reconstruction with inverse rendering for general rigidly moving objects. Our experimental analysis on synthetic data demonstrates that motion can be an advantage for disentangling material and lighting: the reconstructed material is significantly more accurate when the object is observed under rigid motion than when it is static. Moreover, results on RGB videos of real hand-held objects show that our pipeline preserves this advantage even under noisy real-world conditions.

Generated videos provide useful visual motion priors for robot manipulation, but their visual plausibility does not imply physical executability. A generated video usually lacks metric geometry, grasp grounding, robot kinematic feasibility, and execution-time feedback, which makes direct trajectory replay unreliable in real-world manipulation. This paper presents GenVid2Robot, a rigid-geometric consistency framework that converts generated video motion into executable real-robot manipulation trajectories. Given an initial RGB-D observation and a task instruction, GenVid2Robot samples task-relevant semantic anchors from the real first frame, tracks these anchors through generated video candidates, and verifies whether the resulting 2D motion can be explained by first-frame RGB-D anchors under a sparse relative $SE(3)$ model. In this way, generated videos are treated as uncertain visual motion hypotheses rather than direct robot demonstrations. Only geometrically consistent motion is transferred to the robot. The accepted relative motion is then applied to the real grasp-time TCP pose selected by mask-constrained grasping, producing a grasp-conditioned execution trajectory that is consistent with both the visual motion prior and the physical grasp configuration. To reduce execution mismatch caused by RGB-D noise, calibration residuals, and small contact-induced displacement, a bounded depth-compensation module corrects local depth-direction errors without assuming full online replanning. Real-robot experiments demonstrate that GenVid2Robot improves the reliability of generated-video-guided manipulation by grounding visual motion priors with sparse metric geometry, grasp constraints, robot feasibility checking, and bounded execution feedback.

Robust robotic grasping of novel objects requires datasets that simultaneously provide photorealistic RGB-D observations, physically validated grasp quality annotations, and a principled bridge between simulation and the real world, which existing datasets lack to provide jointly. \textbf{GraspIT} addresses this gap: tabletop scenes in NVIDIA Isaac Sim are annotated via a four-stage physical slip-test on parallel Franka Panda instances, producing trajectory-reachability checks and continuous quality scores beyond force-closure.Of ${\sim}$2.3M candidates, 83% pass as \emph{good} ($s{\geq}0.50$); the 17% that passed force-closure but failed the slip-test provide graded hard negatives. A Real$\leftrightarrow$Sim loop back-projects these labels onto 100 real-world scenes. The release provides ${\sim}$316k annotated RGBD frame sets across 1035 sim and 100 real scenes, with instance masks, 6-DoF poses, physical object properties, and scored 6-DoF grasps. All tools are open-source and Docker-containerized. The trajectory planning within Isaac Sim further allows streaming of high resolution demonstrations for tabletop manipulation policy learning and behavior cloning.

Embodied navigation aims to build agents that interpret multimodal goals, reason in 3D space, and reach target destinations reliably in the real world. However, progress remains constrained by the lack of scalable, high-fidelity, and physically grounded interactive environments. Although real-world scanned datasets offer visual realism, they are limited by scale. In contrast, synthetic simulators scale more easily but often exhibit large sim-to-real gaps. We introduce Image2Sim, a real-time neural simulation framework that constructs high-quality interactive environments from posed RGB-D image sequences. The central idea is to decouple 3D spatial anchoring from photorealistic observation synthesis. For scene construction, Image2Sim uses a feed-forward feature Gaussian model that lifts posed RGB-D observations into a 3D feature-Gaussian representation in a single pass. For rendering, we propose a Geometry-Aware One-Step Pixel Flow model that transforms sparse and noisy Gaussian projections into high-quality panoramic RGB-D observations. Image2Sim also serves as a fully automated embodied data engine that generates high-fidelity observations, executable actions, and diverse navigation instructions at scale. It converts large collections of videos and images into nearly 20K interactive scenes and synthesizes more than 10 million navigation training samples. Navigation models trained entirely in these neural environments achieve strong improvements on major benchmarks and transfer effectively to real-world zero-shot settings. These results suggest that scalable neural simulation can serve as a practical training substrate for embodied navigation at scale.

Quantitative 3D spatial reasoning from egocentric RGB-D video is a critical capability for next-generation wearable assistants. Yet existing benchmarks do not reflect the challenges of handling (1) natural egocentric video, (2) posed RGB-D video inputs, and (3) challenging quantitative 3D spatial reasoning Q&A. To fill this gap, we introduce R3D-Bench (Reasoning in 3D), a benchmark of 3,033 quantitative spatial reasoning questions across 15 types -- spanning multiple-choice, distance-based, and volumetric reasoning questions -- built on top of 57 egocentric video sequences from Aria Digital Twin. To set a strong baseline on this dataset, we introduce R3D, a model-agnostic spatial tool-calling framework. In contrast to existing approaches that directly embed 3D information into the model's input representation, R3D constructs a 3D scene from video using segmentation and depth-lifted object representations. It provides this information to an LLM through eight composable spatial tools. On R3D-Bench, R3D with Qwen3-VL 235B achieves 73.5% mean relative accuracy, substantially outperforming the best depth-enabled baseline (CuTR+Tools, 61.9%) and the best RGB-only baseline (Gemini 3 Flash, 46.5%).

Trading card games are increasingly played and broadcast online, yet live streams remain mostly limited to flat top-down footage of the playing area. Augmenting such streams with virtual models of the played cards would improve the viewing experience, but most existing systems rely on instrumented playing surfaces and embedded chips, which are costly and impractical for casual players and large-scale events. In this work, we present TCG-AR, a novel real-time pipeline that augments trading card games using ordinary RGB cameras alone, without any physical markers or specialized hardware. Our pipeline detects, orients, and identifies the cards on the board, renders virtual content onto each card across all views, and can additionally compose a broadcaststyle view that summarizes the game state for spectators, streaming the augmented feeds to standard broadcasting software such as OBS. To train the detection, orientation, and identification models without manual labeling, we introduce an automatic procedure that generates annotated synthetic training data from a reference set of card images. Then, we evaluate several trained models on a new manually annotated dataset with real images, analyzing performance and runtime throughput that determine real-world usability. Overall, by relying only on commodity cameras and hardware, and by open-sourcing all code, models, and datasets, this work aims to serve as a reference for real-time trading card recognition and to make real-time augmented-reality streaming accessible to the broader community of players and streamers.

We present DeWorldSG, a novel framework that generates spatio-temporally robust 3D Semantic Scene Graphs from RGB-D sequences. Existing methods often struggle to construct reliable 3D scene graphs due to unstable 3D object representations and missing relations caused by frame-wise inference. DeWorldSG addresses these issues by estimating instance-level geometric 3D Gaussian distributions through depth-guided filtering and representing each object as a probabilistic 3D node rather than a single projected point. To mitigate relational sparsity from frame-wise inference, our framework further aggregates spatiotemporal evidence across object pairs and refines relations using contextual priors derived from a world model (V-JEPA 2). Experiments on the 3DSSG and ReplicaSSG datasets demonstrate state-of-the-art (SoTA) performance in both object and predicate prediction, while producing temporally consistent scene structures. In particular, our method improves triplet recall by 77.4% and predicate recall by 23.2% over prior SoTA approaches, making it suitable for robotic manipulation and AR applications. Our code and models are open-sourced.

We present LINet (Linear Integration Network), a Multi-Stream Neural Network (MSNN) for RGB-D scene classification. Current multi-modal architectures treat feature fusion as a discrete, ad-hoc event: early fusion entangles representations prematurely, late fusion isolates them until the final layer, and hybrid or attention-based methods require architectural guesswork to place intermediate fusion blocks. LINet addresses this structural compromise by maintaining three dedicated parallel streams (RGB, depth, and integration) where a novel Linear Integration Convolution (LIConv2d) operator enables continuous cross-modal learning at every layer. The integration stream receives raw filtered signals from both modality streams and combines them before the nonlinear activation threshold, conceptually inspired by somatic integration preceding the neuronal firing decision. Implementing continuous integration exposes a critical initialization pathology: Kaiming initialization of the bridging weights scrambles gradients before they reach the stream backbones, producing a failure mode that resembles overfitting but is corrupted gradient flow. A 1/N constant initialization mitigates this. We employ progressive modality dropout, a curriculum adapted to continuous fusion in which blanking probability increases from zero, preventing pathway collapse, a form of negative co-learning, by forcing robust independent stream representations. Trained from scratch on SUN RGB-D 19-class scene classification, LINet reaches 45.2% mean class accuracy at ResNet18 scale, outperforming prior from-scratch results, and rises to 49.6% with in-domain RGB-D (ScanNet) pretraining.

Accurate extrinsic calibration of inertial sensors, such as Inertial Measurement Units (IMUs) and cameras is crucial for trajectory estimation of Uncrewed Aerial Vehicles (UAVs). While numerous calibration methods have been proposed, these techniques often rely on specialized equipment, planar targets, and an initial estimate of the calibration parameters. In this research, we propose a targetless calibration method designed for UAVs equipped with IMUs and RGB-Depth (RGB-D) cameras. Our approach leverages deep-learning-based floor-segmentation to extract ground points from the depth channel of RGB-D images. Subsequently, the normal vector to these points is estimated. The known orientation of the normal to the floor segment and the gravity vector sensed in the accelerometer's frame are utilized in a robust estimation approach to estimate the extrinsic calibration parameters. We illustrate that the developed method outperforms MATLAB's Toolboxes and exhibits similar performance to Kalibr without the use of specialized checkerboard targets.

Rehabilitation exercises are essential in restoring lost physical functions of patients suffering from various diseases (e.g., Parkinson's, back pain). Carrying out these rehabilitation exercises, often prescribed by health experts, is costly, unavailable, and requires expert supervision. The availability of RGBD images and movement/position data of joints along with expert annotation of exercise data has prompted the use of automatic assessment of the quality of rehabilitation exercises, which is cost-effective and can be carried out at home. However, existing approaches do not extract relevant features, lack practical application, require expensive pre-processing, or overlook crucial features. This study proposes a transformer-based framework for point clouds to extract features and assess rehabilitation exercises by analyzing joint positions collected through RGBD data. We adapt and utilize a curve-based point-cloud feature aggregation technique to augment point-cloud information that aids model output. The transformer architecture also uses axial self-attention, recognizing important joints and their roles to assist users in performing the exercise better. The guided system outperforms existing approaches and is also practically relevant due to its small size, fast inference, and generalization on specific joints in similar exercises. We conduct our experiments on three crucial baseline datasets for rehabilitation exercises: Kimore, UI-PRMD, and IRDS.

Existing world model-based planners for visual navigation typically follow a verification-centric paradigm, decoupling goal intent from trajectory synthesis. This approach suffers from candidate dependence, heavy computational overhead, and inconsistencies between sampled actions and predicted visuals. To address these issues, we propose SWAM (Spatial-perceiving World Action Model), a task-centric joint observation-action generation framework. Given start and goal RGB observations, SWAM performs single-pass inference to simultaneously generate intermediate RGB-D sequences and corresponding action trajectories, promoting goal-consistent trajectory generation and improved spatial feasibility. While SWAM leverages depth pseudo-labels during training to internalize spatial priors, it requires only monocular RGB input at inference time. We further introduce a visual-guided action refinement module and a trajectory-scale regularization loss to enforce fine-grained alignment between motion and visual cues while stabilizing predictions across varying distances. Extensive experiments show that SWAM significantly outperforms state-of-the-art two-stage planners in success rate, trajectory accuracy, and inference efficiency, while demonstrating robust zero-shot generalization to unseen environments.

Conventional RGB cameras suffer from lighting artifacts such as flare, glare, flicker, and overexposure, leading to irrecoverable information loss that necessitates computational restoration. However, existing approaches treat these problems in isolation, failing to recover structural details completely obscured by complex spatially discrete image degradations. In this paper, we propose a novel cross-modal restoration paradigm and present DeLux, a modular proof-of-concept pipeline that leverages neuromorphic event streams as a structural prior to guide the targeted detection and inpainting of lighting artifacts in RGB video. Validation on synthetic benchmarks and real-world automotive footage demonstrates that DeLux effectively suppresses local artifacts and restores affected regions. The proposed approach outperforms existing RGB-only baselines and event-guided HDR models, achieving an average MS-SSIM of over 0.99 across all artifact types and demonstrating up to an 88% reduction in artifact severity in real-world automotive footage. The synthetic artifact generation tools and curated real-world evaluation datasets are made publicly available to foster future research on cross-modal restoration.

Modern video diffusion transformers position their tokens through RoPE on the (u,v,t) axes -- a description of the camera's sampling grid that says nothing about the 3D structure of the scene. We observe that the geometric relation between two camera rays is captured by the Plucker reciprocal product, which is bilinear in the two rays -- the same algebraic form as the dot product in Transformer attention. Building on this analogy, we propose RayPE, a positional-encoding extension that injects per-token 6D Plucker coordinates additively into the queries and keys of self-attention, with a query/key flip arrangement under which the symmetric identity configuration coincides exactly with the reciprocal product. The injection is additive, the resulting attention score decomposes into a content term, a geometry term, and two content and geometry cross-terms -- all of which our experiments find individually necessary. To make the encoding stable across video data with heterogeneous camera-translation scales (SfM, deep SLAM, metric), we further decouple ray direction from moment magnitude, gate the encoding by a learned function of the log-magnitude, and apply RMSNorm to align it with the QKNorm-normalized content branch. The full module adds less than 0.1% parameters to a pretrained video DiT, is zero-initialized to start from the pretrained weights, and improves camera controllability, cross-frame 3D consistency, and overall video quality on a four-dataset training mixture.

Camera-based monitoring systems are increasingly adopted in healthcare settings for the continuous assessment of patient movement and activities. However, their technical performance under real-world indoor conditions remains insufficiently characterised, preventing appropriate camera selection for clinical or home adoption and reproducibility. Existing validation studies typically assess either device metrological performance or algorithm accuracy in isolation, and often do not systematically account for practical deployment factors, such as lighting variability, occlusions, and camera positioning. We present two technical validation protocols: the first evaluates the metrological performance of RGB and RGB-D cameras, and the second assesses their use in supporting human pose estimation, validated using state-of-the-art pose estimators. The proposed protocols systematically assess five cameras, four RGB-D and one RGB, under controlled variations in lighting, camera height, viewing angle, and occlusion level within representative indoor scenarios. The experimental results show that metrological performance varies substantially across cameras, with depth bias at 5 m ranging from 50 mm to over 1400 mm depending on the device. For 2D pose estimation, all cameras achieve broadly comparable accuracy, with mean mAP between approximately 78% and 90% across cameras and estimators, whereas 3D reconstruction error differs markedly across devices, with MPJPE ranging from 104 mm to 365 mm, closely reflecting underlying depth-sensing quality. Environmental factors have a camera- and estimator-dependent effect on 3D performance, while camera mounting height has minimal influence within the evaluated range. This work provides evidence-based guidance for the selection and deployment of cameras in healthcare monitoring applications, addressing an important gap in current technical validation practice.

Deploying robots in unstructured real-world environments needs accurate, interactive models of the objects. Constructing these models at scale remains a critical bottleneck for robotic system integration. We present ArtiTwinSplat, a framework that automatically constructs articulated, photo-realistic digital twins of objects directly from RGB-D videos, requiring no CAD models, simulation assets, or manual annotations. Our method is built on 3D Gaussian Splatting that preserve geometric fidelity and photometric realism, coupled with an unsupervised articulation discovery pipeline that recovers part structure and joint kinematics from observed motion alone. With tracking and optimization stages our method provides stable, queryable digital twins that support real-time rendering, viewpoint control, and interactive manipulation. Unlike prior methods confined to simulation, ArtiTwinSplat operates directly on real-world observations and produces twins that are immediately usable by downstream robot planning and learning systems. This method offers a practical, scalable pathway toward digital twin construction, lowering the integration barrier for articulated object manipulation in embodied AI and human-robot collaboration contexts.

High frame-rate RGB-D videos are crucial for a variety of downstream tasks, including motion analysis, dynamic scene understanding, and 3D reconstruction. However, due to hardware and sensing constraints, practical RGB-D cameras are typically limited to low frame rates, making it difficult to capture rapid scene dynamics. Existing video interpolation methods have achieved strong performance on RGB data, but they are not readily applicable to RGB-D scenarios, where they often yield blurry boundaries, visible artifacts, and degraded geometric consistency. Furthermore, motion estimation from only two boundary frames is inherently under-constrained in complex dynamic scenes. Event cameras, by contrast, provide asynchronous measurements with ultra-high temporal resolution, offering dense motion cues. In this paper, we propose a unified multimodal framework for RGB-D video interpolation that jointly exploits RGB appearance, depth geometry, and event-based temporal cues. Specifically, it first extracts and fuses RGB, depth and event cues, then estimates bidirectional flow with motion basis refinement for RGB and Z-axial refinement for depth, and finally synthesizes the target RGB-D frame via bidirectional warping and soft blending. In addition, we construct a new RGB-D-Event dataset to alleviate the scarcity of tri-modal training data. Extensive experiments on a public benchmark and the proposed dataset demonstrate that our method achieves superior photometric fidelity for RGB interpolation and stronger geometric accuracy for depth interpolation than existing approaches.

Person re-identification (Re-ID) is a crucial task in surveillance and human behavior analysis, often used in public spaces such as transport hubs. Traditional RGB-based Re-ID methods raise privacy concerns and are highly sensitive to lighting variations and occlusion. In this paper, we propose a novel Re-ID approach that leverages depth images, which inherently obscures facial and other identifiable features, making it a privacy-preserving solution. Our method addresses the association problem between multiple views of individuals by applying the Hungarian algorithm, optimizing the matching process through minimization of the global cost across the distance matrix. We further enhance the approach by introducing temporal sequences of frames as input to a Transformer encoder architecture, which exploits both RGB and depth modalities. This architecture captures dynamic movement patterns, improving feature extraction and re-identification accuracy. Additionally, we employ batch hard triplet loss to enhance discriminative feature learning by focusing on the hardest samples. We evaluate both depth-only and RGB-D models on several top-view datasets, including TVPR2, GODPR, and BIWI RGBD-ID. Our results demonstrate that depth-only re-identification can achieve competitive performance compared to state-of-the-art methods, as measured by standard metrics such as Cumulative Matching Characteristics (CMC) and Mean Average Precision (mAP), while prioritizing privacy preservation.

Commercial greenhouse cucumber production is graded by fruit length, which drives harvest scheduling, labour allocation, and logistics. Manual measurement with thread or caliper is accurate but infeasible at commercial scale. This paper presents CucumberVision, a non-contact length estimation framework using an Intel RealSense D435 RGB-D camera. A YOLO26n instance segmentation model locates cucumbers, and SAM (ViT-B backbone) refines each detection to a pixel-precise mask. Five methods are evaluated under matched conditions: (M1) a dominant-axis skeleton scan-line baseline; (M2) PCA on the bounding-box depth point cloud; (M3) SAM mask with medial-axis skeletonisation; (M4) a hybrid keypoint-guided approach using a YOLO26-pose model predicting five anatomical landmarks (KP0--KP4) with piecewise 3D arc-length; and (M5) a novel medial arc spline method fitting a cubic spline through the 3D medial axis of the SAM mask and computing arc length by trapezoidal integration -- the first such application to elongated vegetable measurement. All methods share five-frame burst depth averaging, colour-stream intrinsic alignment, and adaptive method selection with cascading fallbacks ensuring 100% coverage. A benchmark of 48 captures across seven cucumbers in three size categories (small ~8 cm, medium ~13 cm, large ~25 cm) with thread-based ground truth establishes a significant accuracy hierarchy: M1 (MAPE 9.68%) > M2 (5.31%) > M4 (5.51%) > M3 (5.82%) > M5 (4.13%). M5 significantly outperforms all competitors at Bonferroni-corrected alpha=0.0125. A secondary contribution is identifying a 12--18% length underestimation caused by using depth-stream rather than colour-stream intrinsics after rs.align(rs.stream.color) -- an under-reported error source. The complete system is released open source and runs in real time on a single consumer-grade GPU.

Monocular and RGB-D visual-inertial SLAM systems remain susceptible to limited field of view, sensor-specific failure modes, and unreliable cross-session relocalization. To address these issues, we present GeoFlow-SLAM++, a tightly coupled multi-camera visual-inertial SLAM system that extends GeoFlow-SLAM from a single RGB-D sensor to a calibrated multi-camera rig with a unified body-centric formulation. Within this multi-camera framework, GeoFlow-SLAM++ supports two interchangeable visual front-ends: a conventional ORB front-end and a neural network feature (NN-Feature) front-end built on SuperPoint and LightGlue. The system unifies tracking, mapping, and relocalization on a shared body state, and combines multi-camera reprojection constraints, IMU pre-integration, cross-view place recognition, and dual-stream optical flow/NN-Feature tracking for robust localization. As an optional extension, the system can further incorporate cross-view-consistent pseudo-depth predictions from RGB images as auxiliary geometric constraints. We evaluate GeoFlow-SLAM++ on EuRoC, OpenLORIS, TUM, Hilti, and a self-collected handheld multi-camera dataset. Results show that the NN-Feature front-end improves robustness in appearance-challenging scenarios, the multi-camera formulation achieves competitive localization accuracy on Hilti, and the unified cross-view relocalization design reaches LiDAR-comparable performance on the handheld dataset.

Recent 3DGS-SLAM systems enable real-time operation by leveraging conventional feature matching or ICP-based tracking, thereby avoiding the heavy dense photometric optimization used in earlier approaches. However, feature matching remains prone to failure in textureless environments, while ICP-based tracking struggles in structureless or geometrically degenerate scenes due to ill-conditioned optimization. To address this issue, we propose Spectral GS-SLAM, an efficient yet robust tracking framework that integrates ICP with complementary feature-based constraints. Our method mitigates numerical instability by adaptively compensating under-constrained directions in degenerate scenarios, without interfering with the shared Gaussian representation used for mapping. We further introduce a Gaussian-aware planarity weighting mechanism that exploits the intrinsic covariance structure of 3D Gaussians to characterize scene geometry and guide information fusion. Extensive evaluations on challenging TUM RGB-D sequences demonstrate that Spectral GS-SLAM achieves real-time performance (40.14 FPS) while maintaining consistent tracking in both structureless and featureless environments. The proposed method preserves trajectory integrity in degenerate scenes while maintaining competitive performance in non-adverse conditions.

Image-based behaviour cloning leverages demonstrations captured from ubiquitous RGB cameras. However, it remains constrained by the cost of collecting diverse demos, especially for generalizing across workspace variations. We propose MirrorDuo, a reflection-based formulation that operates on image, proprioception, and full 6-DoF end-effector action tuples, generating a mirrored counterpart for each original demonstration, effectively achieving "collect one, get one for free". It can be applied as a data augmentation strategy for existing learning pipelines, such as standard behaviour cloning or diffusion policy, or as a structural prior for reflection-equivariant policy networks. By leveraging the overlap between the original and mirrored domains, MirrorDuo achieves significantly improved performance under the same data budget when demonstrations are evenly distributed across both sides of the workspace. When demonstrations are confined to one side, MirrorDuo enables efficient skill transfer to the mirrored workspace with as few as zero or five demos in the target arrangement.

We present ZeroDex, a zero-shot framework for long-horizon dexterous manipulation that grounds language instructions into executable 3D task plans from calibrated multi-view RGB images. Rather than training an end-to-end policy, our system uses a vision-language model (VLM) to produce reference-frame task grounding and primitive-level 2D keypoints, then lifts them into 3D via multi-view fusion. This lifting combines triangulation of view-wise VLM groundings with reference-view ray voting, which searches along a semantic camera ray for geometrically consistent candidates across neighboring views. The resulting 3D keypoints support both pick-and-place and tool-use: for tool-use, we retrieve an object-centric atomic action corresponding to the inferred skill category and align its stored 6D tool trajectory to the scene; for dexterous execution, we expand the lifted grasp keypoint into a task-conditioned grasp affordance region and generate feasible grasp-motion pairs with an arm-hand motion generator. Real-world experiments show improved 3D grounding accuracy and execution reliability over single-view RGB-D grounding and fine-tuned VLA baselines. We further demonstrate long-horizon manipulation through closed-loop status verification and replan, enabling zero-shot execution on unseen objects and tool-use tasks in novel scenes.