Lane Geometry

Work zones alter lane geometry through temporary traffic controls and closures that may be absent from on-board maps, challenging autonomous vehicle (AV) perception and planning. Generalization is also limited by scarce public datasets with structured geometric supervision. We present WorkZonePlan, a dataset comprising 149K+ synthetic and 5K+ real-world multimodal samples with 3D annotations for lane boundaries, work zone boundaries, and driving trajectory options. It also provides 76 closed-loop CARLA scenarios replayed under three weather conditions, yielding 228 Bench2Drive-format evaluation routes. We introduce WAVE (Work-zone-focused AV data generation in Virtual and rEal Environments), a semi-automated pipeline for creating the dataset, and BoundaryFormer (BF), a transformer-based model that jointly predicts lane and work zone boundary polynomials and driving trajectories. BF uses slot attention for boundary prediction. Ablations show that a separate trajectory decoder using boundary slot features substantially improves trajectory prediction over a slot-attention-only approach. Building on this finding, BF++ offers Camera and Camera+LiDAR variants with metric ground-plane encoding, typed boundary/trajectory queries, long-range point anchors, image-space curve refinement, and conservative gated LiDAR fusion. On the 211 routes common to all four models at the evaluation freeze, BF++-Camera and BF++-Camera+LiDAR achieve Driving Scores of 63.0 and 64.4, respectively, compared with 59.3 for SimLingo and 26.1 for TransFuser++ (TF++). BF++ is 40 times smaller than SimLingo and more than 10 times smaller than TF++, while achieving higher Driving Scores. These results support jointly predicting lane boundaries, work zone boundaries, and driving trajectories as a promising direction toward safer AV operation in work zones. Code and dataset: https://github.com/Nishad-Sahu/WZPlanner.

The HSI-Road dataset provides paired RGB and 25-channel NIR (600--960~nm) images with binary masks but no surface-level labels.~This paper introduces a manually labeled six-class taxonomy: Background, Asphalt, Concrete, Dirt, Water, and Grass, and an RGB-to-NIR registration pipeline with corresponding annotations. Six semantic-segmentation models (SSMs) are evaluated under four input configurations: original-resolution RGB (RGB$_{\text{ori}}$), registered low-resolution RGB (RGB$_{\text{reg}}$), NIR, and channel-stacked RGB$_{\text{reg}}$--NIR (RGBN$_{\text{stk}}$). The comparison quantifies the effect of spatial-resolution reduction on RGB, along with evaluation of NIR and RGBN$_{\text{stk}}$, with results reported using per-class and mean IoU and F1 scores. RGB$_{\text{ori}}$ achieves the highest overall performance but contains 12$\times$ more pixels than the matched-resolution inputs. At the matched 192$\times$384 resolution, RGBN$_{\text{stk}}$ outperforms NIR for all six SSMs and RGB$_{\text{reg}}$ for five of six, with the most consistent gains for the Water class. These results highlight the importance of spatial resolution while showing that NIR provides complementary information to RGB.

AI-based automated vehicle testing is challenging because a model that passes every test condition can still fail in the real world. Formal verification offers a way to directly address this gap. On a simulated highway and an arterial road we trained two small end-to-end steering networks each in CARLA, one on clear conditions alone and one on clear, fog, night and low sun. All four models were driven against a 2.19 ft lane-departure budget. Without driving again, we used bound propagation, a formal method that reads the trained weights, to compute how far steering can drift at every disturbance strength between two captured images. One calculation covers more than a campaign could drive: on the arterial it spans 133 poses, where ten intensities each would be 10^133 combinations, in minutes on one GPU. Not only did formal verification find conditions that broke the clear-trained policy without simulation testing, it provided some preliminary evidence for potential failures between the test cases. Our overall conclusion is that formal verification is a viable complement to simulation, and could be adopted as a part of verification and validation for automated driving.

Despite significant progress in odometry estimation, long-term drift remains a fundamental limitation of incremental pose integration, especially in large-scale or loop-free environments. Existing map-assisted methods can reduce drift, but often depend on dense maps, sensor-specific processing, or complex matching pipelines. We propose a lightweight open-source, odometry-agnostic correction method that aligns short trajectory segments to OpenStreetMap (OSM) lane centerlines. By formulating drift correction as a direct alignment between recent odometry and sparse lane geometry, the method enables efficient online operation without dense priors or expensive preprocessing. Experiments with LiDAR and visual odometry backends demonstrate consistent improvements, with particularly strong gains under severe drift.

Autonomous driving simulation requires diverse and scalable lane-level HD maps to support long-horizon evaluation across complex road networks. Existing approaches either rely on handcrafted or reconstructed real-world maps, which limits scalability, or generate only local road structures rather than complete HD maps. We present RoadWeaver, a coarse-to-fine framework for from-scratch generation of diverse, large-scale HD maps. RoadWeaver first synthesizes a global road layout, expands it into a connected road network, and then constructs lane-level geometry with topologically consistent lane connectivity. Experimental results show that RoadWeaver achieves a 99.8% reachability, a 10.7% dead-end ratio, and an endpoint alignment error of 0.24 m. Compared with SOTA generation methods, it reduces endpoint alignment error by 94.4% while generating complete HD maps in 1.39--3.50 s. The generated maps can be directly deployed in driving simulators, providing scalable simulation environments for future closed-loop evaluation of autonomous driving systems. The training code and an out-of-the-box implementation of RoadWeaver will be released upon acceptance.

We introduce the \emph{Safe Bicycle Network with Bounded Detours} (\emph{SBNBD}) problem, motivated by upgrading rural road networks for bicycle traffic. Given an undirected graph with safe and unsafe edges, edge lengths, upgrade costs, terminal pairs, a budget, and a detour factor $α$, the task is to upgrade unsafe edges so that each terminal pair is connected by a safe path of length at most $α$ times its shortest-path distance in the original network. We study SBNBD from a parameterized perspective. We prove strong NP-hardness on restricted graph classes, including planar graphs of treewidth two, graphs with feedback vertex set number one, and graphs of maximum degree three, and complement these lower bounds with polynomial-time algorithms for trees and graphs of maximum degree two. We show fixed-parameter tractability for the number of unsafe edges and prove matching SETH-based lower bounds, a polynomial-kernel lower bound, and W-hardness for natural parameters. Our main structural result maps any instance to an equivalent instance with $O(\mathrm{fes}+p)$ vertices and edges, where $\mathrm{fes}$ is the feedback edge number and $p$ the number of terminal pairs; this yields fixed-parameter tractability for $\mathrm{fes}+p$. Finally, we evaluate ILP-based algorithms on OpenStreetMap road networks for small German municipalities and their surroundings. The instances have small treewidth upper bounds and moderate feedback edge structure. Preprocessing based on the $\mathrm{fes}+p$ reduction and tree-decomposition-based cut generation both improve exact solving, especially on harder instances. Experiments with different detour factors show that increasing $α$ can reduce the upgraded-edge length, revealing trade-offs between upgrade cost and allowed relative detours. Overall, structural graph parameters provide a useful algorithmic lens for safe bicycle-network design.

Wearable human activity recognition (HAR) remains challenging due to the computational and energy constraints of deep learning models on resource-limited devices. Existing lightweight approaches often rely on recurrent architectures (e.g., GRU and LSTM), limiting parallelism and increasing inference latency. We propose LITEWAY, a modality-agnostic, fully convolutional framework for multichannel sensor time series that replaces recurrent temporal modeling with structured convolutional decomposition. LITEWAY combines lightweight convolutional blocks, strided temporal processing, and convolution-attention pooling to efficiently capture temporal dependencies while reducing computational complexity. We evaluate LITEWAY on 16 HAR datasets against TinyHAR, TinierHAR, and MLP-HAR. LITEWAY achieves competitive macro F1 while reducing model size by 4.06x-9.52x (Light) and 3.87x-9.07x (Full) compared with TinyHAR and TinierHAR. Deployment experiments further show energy reductions of 2.29x-3.14x (Light) and 1.46x-2.01x (Full) compared with TinierHAR and MLP-HAR, highlighting efficient fully convolutional temporal modeling for wearable HAR. The source code is publicly available at https://github.com/dominique-nshimyimana/liteway.

Simulation is crucial for developing and testing autonomous driving systems. In particular, the development of localization and control algorithms relies on an accurate vehicle dynamics simulation. However, most vehicle dynamics models are two-dimensional while real-world roads are three-dimensional. For example, effects from the three-dimensional road geometry on the Las Vegas Motor Speedway can increase the normal forces on the tires by more than 66% compared to the nominal load at standstill. As a result, even highly detailed planar vehicle dynamics models struggle to accurately reproduce the real vehicle's behavior. While solutions for three-dimensional vehicle dynamics exist, they are rarely adopted, computationally expensive, and complex. To address this issue, we present a novel method to couple planar vehicle dynamics models with real-world three-dimensional road geometry. We transform the planar vehicle state from the vehicle model's two-dimensional plane to its corresponding representation in three-dimensional space. Additionally, we calculate road-geometry-induced forces and moments and apply them to the planar vehicle model. We validate our approach using high-speed data recorded with a full-scale race car on the banked Las Vegas Motor Speedway. Furthermore, on synthetic tracks, we show that our method yields accurate results even in edge cases. Together, our results demonstrate that the gap between planar simulation and real-world three-dimensional roads can be closed without abandoning simpler planar models. To simplify adoption of our method, we provide the implementation as open-source software on github.com/TUMFTM/3d-road-geometry-coupling.

Traffic data collection is dominated today by deep object detectors followed by tracking-by-detection, a pipeline that presupposes what is often missing in practice: a detector already trained on the class one wants to count. We revisit a purely geometric traffic-sensing pipeline for Single Board Computers in which detection is class-agnostic: moving objects come from background subtraction and thresholding, and counting is decided by a geometric rule on an imaginary line across the road, a software inductive loop detector. With no object model, training set or per-object trajectory, it runs faster than real time on Raspberry Pi class hardware. Two counting rules are described: a constant average speed rule, whose expected accuracy is derived analytically as about 86% under a Gaussian speed distribution, and a self-calibrating pre-calibration rule that recovers the lane geometry from blob statistics and counts edges of lane occupancy, additionally yielding per-vehicle average speed at no extra cost. Over four videos the latter counts with 83.3%-100% accuracy; in a field deployment it reaches 91% against 37.5% for a blob-tracking baseline under the same compute budget. We report the observations of that period in detail: the resolution floor below which accuracy collapses, the frame rate floor at which vehicles alias past the counting line, the gap between short curated clips and long uncontrolled footage, and the trade-off between Python (easier to tune, 100% CPU) and C++ (40% CPU, thermally viable). These are properties of the sampling geometry, not of the hardware of the time, and still constrain edge deployments. We close by arguing where motion-based, class-agnostic detection remains the right tool: open-set classes with no annotated data, tight power budgets, privacy-constrained installations, and the cold start of mining training crops to bootstrap a learned detector.

Accurate vehicle localization from monocular roadside surveillance cameras is important for intelligent transportation systems, traffic monitoring, and traffic conflict analysis. Standard approaches often estimate vehicle position from the center of the detector bounding box, which can produce large errors due to perspective distortion and parallax, especially for elevated cameras and large vehicles. This paper proposes a two-stage geometry-aware localization pipeline that estimates the projection of the vehicle footprint onto the road plane. First, vehicles are detected using a YOLO26-based detector. Second, a dedicated ResNet34 regression network predicts four corner points corresponding to the projected vehicle base. The final position is computed as the geometric center of the predicted quadrilateral. The method was trained on synthetic data generated in CARLA and fine-tuned on real-world roadside imagery from DAIR-V2X. Experiments on synthetic and real data showed clear improvements over naive bounding-box-center localization. On DAIR-V2X, the mean image-space localization error decreased from 31.77 px to 15.30 px, a 51.8% improvement, while the median error decreased to 4.29 px. Median ground-plane error for medium-range vehicles decreased from 5.52 m to 0.90 m, and for far-range vehicles from 8.67 m to 1.84 m. The results also show that contextual information surrounding the detector bounding box is important for geometric localization. The largest gains were observed for distant vehicles and geometrically challenging cases affected by strong perspective distortion and parallax.

High-quality driving data are essential for autonomous-driving systems and generative world models. However, rare and safety-critical scenarios involving adverse weather, braking under low tire--road friction, and uneven road geometry are costly and risky to collect at scale. Existing video-generation and 3D Gaussian editing methods can modify weather appearance or road geometry, but typically do not couple these edits with tire--road interaction and vehicle dynamics. As a result, an edited video may retain its original trajectory even when the modified road condition should alter braking, wheel slip, load transfer, and ego-camera motion. We present muSync-GS, a physics-synchronized framework for driving video synthesis under adverse-weather and road-elevation hazards. A precipitation-derived road-surface condition jointly controls road appearance and tire friction, while a shared road-elevation profile drives both visible road-geometry editing and axle excitation. A calibrated vehicle model predicts speed, slip ratio, normal loads, and pitch for constructing the ego-camera trajectory and synchronized physical annotations. On 12 held-out CarSim cases spanning precipitation levels, brake inputs, and road-profile parameters, the model achieves mean case-wise RMSEs of 0.0273 m/s for speed, 0.0590 degrees for pitch, 0.0101 for slip ratio, and 26.61 N for per-wheel normal load. Together with the reconstructed-scene experiments, these results show that muSync-GS accurately reproduces vehicle responses under held-out controls while synchronizing them with controllable scene edits and ego-camera motion.

A closed-set detector for autonomous driving must assign every object one of a fixed set of labels. On an object outside that set (a horse-drawn carriage, road debris, livestock on a rural road) it can only force a confident but wrong specific label or drop the object. Prior work in this series replaced the flat label set with a hierarchical taxonomy and a runtime abstraction rule, but evaluated it only on the boxes a closed detector already produces. This paper takes the layer open-world: we place taxonomic abstraction on top of class-agnostic region proposals so objects the closed detector never boxes can still be classified or flagged; we report a feasibility study of three open-world signals (class-agnostic segmentation, appearance-based out-of-distribution scoring, monocular depth) that shows why no single 2D cue suffices and how they compose; and we run the evaluation the earlier papers could not, a ground-truth leave-classes-out benchmark on real annotated objects. Holding out seven COCO classes and classifying their 235 ground-truth crops, a flat closed head emits a confident wrong specific label 100% of the time (37% of them in the wrong super-category, e.g. an animal named as a vehicle), whereas the hierarchical layer emits zero confident wrong specific labels and safely handles 94% of the objects (a correct super-category, or an explicit UNKNOWN OBSTACLE). We are explicit that this is a safety result, not a specificity one: the correct super-category is recovered only 26% of the time and the remaining 69% are conservatively flagged unknown. The contribution is an open-world perception layer that never makes a confident categorical mistake on an out-of-vocabulary object, together with an honest account of its cost.

Road network segmentation from satellite imagery remains challenging due to large geographic variation in road appearance, occlusions, and domain shifts introduced by differing resolutions and sensors. Existing models, typically trained under narrow resolution--region combinations, generalise poorly to unseen environments such as rural settings, regions with distinct road materials, or imagery from new satellite platforms, often producing broken or disconnected predictions. Adapting these models to new domains usually requires retraining or fine-tuning, which is costly and risks catastrophic forgetting. In this work, we reframe global road extraction as a continual adaptation problem rather than an architectural one. Our framework combines cross-resolution knowledge distillation across a resolution-decreasing curriculum, multi-sensor training, and topology-aware supervision, yielding a single model that generalises across $0.3-1.0$ m imagery from multiple satellite platforms across continents. On publicly available benchmarks, including City-Scale and Global-Scale, our model outperforms state-of-the-art results by up to $22$ F1 points and $15$ APLS points, while remaining the most efficient, with $3\times$ faster inference. Our results suggest that improved robustness across diverse sub-meter satellite imagery can be achieved through targeted training strategies, such as data curricula, distillation, and topology-aware losses, rather than increasingly complex architectures.

This paper introduces the edge-based contiguous p-median (ECpM) problem to partition the roads in a network into a given number of compact and contiguous territories. Two binary programming models are introduced, both of which incorporate a network distance. The first model requires an exponential number of cut set-based constraints to model contiguity; it is paired with a separation scheme that usually generates only a small number of these constraints, namely, a branch-and-cut (B&C) algorithm. The second model utilizes a polynomial number of shortest-path constraints to model contiguity and can be solved with off-the-shelf solvers. The respective solution approaches are tested on road networks with over 2,700 nodes and close to 3,400 edges, yielding models with over 9.6 million binary variables. Solving the model based on shortest path contiguity (SPC) constraints via standard branch and bound attains speedups in computational time of up to 17x relative to the cut set-based B&C implementation. In addition, the SPC constraints are demonstrated to be supervalid inequalities of the edge-based p-median (EpM) model (i.e., for which contiguity is not explicitly required), meaning that they may cut off integer-feasible solutions and some, but not all, of the optimal solutions of this simpler problem. Finally, the paper explores structural insights and connections between ECpM and the edge-based districting (EBD) problem, which enforces an additional work balance criterion. An existing model that utilizes cut set-based contiguity constraints was unable to find a feasible solution within 12 hours for any of the tested instances, while an SPC-based EBD model was able to solve most of these to optimality.

Currently, autonomous driving object detection models face significant data scarcity and generalization challenges when navigating complex Chinese rural traffic scenarios. To address these limitations, we propose a novel real-synthetic mixed object detection dataset tailored specifically for Chinese rural roads and systematically evaluate the performance of 13 mainstream detectors under different real-to-synthetic data ratios, thereby providing empirical evidence for model selection and data strategy design in rural autonomous driving scenarios. Our dataset combines real-world images captured in Weishi County, Henan Province, with parameterized virtual scenes generated via Unreal Engine. To accurately reflect the unique realities of rural traffic, we define a comprehensive 14-category object system encompassing region-specific elements such as electric tricycles, low-speed vehicles (LSVs), and roadside stalls. Under a unified training protocol, we systematically evaluate 13 mainstream detectors -- spanning the YOLOv5, YOLOv8, YOLO11, and YOLO26 series, as well as RT-DETR-L -- across three data configurations: an all-real baseline, a 1:0.5 real-to-virtual mix, and a 1:1 mix. Experimental results demonstrate that a moderate injection of synthetic data (1:0.5 ratio) effectively enhances detection performance, with YOLO11m achieving the highest mAP@0.5 of 0.758. However, a higher proportion of synthetic data (1:1) introduces domain shifts that offset the benefits of data scaling. While most models reliably identify distinct local vehicles, significant perceptual bottlenecks remain for long-tail, non-standard objects like stalls and railings. This research provides crucial empirical evidence and novel insights for model selection and synthetic data strategies, facilitating the practical deployment of autonomous driving perception systems in rural areas.

Traffic prediction is a core task in intelligent transportation systems, supporting applications such as adaptive signal control, route guidance, and ride-hailing dispatch. Deep learning models, including graph convolutional networks, recurrent networks, and Transformers, achieve strong results on standard benchmarks, but their architectures are designed by hand, requiring significant expert effort and producing models that often generalize poorly across cities and datasets. Neural Architecture Search (NAS) offers a systematic alternative to manual design. It automates the search over candidate architectures of deep learning models, finding designs that match the spatial-temporal structure of traffic data without manual trial and error. This survey reviews NAS methods applied to traffic prediction, organized by search strategy: gradient-based methods, evolutionary methods, and one-shot weight-sharing methods. For each category, we analyze how the search space is designed to cover spatial and temporal traffic operators, and how the search strategy balances cost against architecture quality. We also discuss open challenges, computational scalability to large road networks, manual search space design, cross-city generalization, dynamic graph structure, and the open question of NAS for spatial-temporal foundation models, and identify directions for future research.

Large-scale road surface reconstruction supports high-definition mapping, autonomous-driving perception, annotation, and simulation. Existing road-specialized optimization methods can produce high-quality road representations, but they typically require per-scene training and scene-dependent coverage design around the driving trajectory, limiting scalable reconstruction over newly collected roads. To address these limitations, we introduce RoadVGGT, a road-structure-aware feed-forward framework that reconstructs compact Gaussian road surfaces without test-time per-scene optimization. RoadVGGT uses a geometric foundation model to exploit multi-view images together with provided pose and depth observations, and predicts dense pixel-aligned Gaussian attributes through a learned Gaussian head. To make these dense predictions usable for large road surfaces, we align them into a consistent metric world coordinate system and fuse redundant Gaussians on the road-aligned XY plane through confidence-weighted grid fusion. Category-aware grouping and road--sidewalk junction protection further control fusion around vulnerable road structures. The resulting representation supports RGB and semantic bird's-eye-view maps, elevation estimation, and novel view synthesis. RoadVGGT eliminates the need for per-scene optimization in prior methods, reconstructs complete road surfaces with a compact Gaussian representation, and improves image quality, semantic mapping, and elevation accuracy. Extensive experiments demonstrate the potential of geometric foundation models for scalable feed-forward road surface reconstruction.

Time-dependent routing recognizes that the same journey can take a different time depending on when it begins. Under duration minimization, even the departure time of each vehicle becomes a decision. Exact methods for this setting exist in the literature, but researchers and practitioners have lacked a ready-to-use open solver that combines rich piecewise-linear travel times, early feasible solutions and optimality claims. KAYROS fills this gap with two modes on one checker-consistent engine: an Iterated Local Search that streams improving solutions and a Branch-Price-and-Cut method that can issue computational optimality certificates under explicit arithmetic and search assumptions. It installs with one command and has no proprietary dependency. The public MAMUT-routing store currently contains 704 KAYROS certificates under a four-solve publication protocol, which has also led to the retraction and repair of invalid earlier claims. The report presents two complementary benchmark contributions to MAMUT-routing. The first integrates Blauth2024, a benchmark from the literature whose travel times derive from measured Uber speeds, for which KAYROS provides new best-known solutions on all 40 instances. The second proposes Poryos2026, a new benchmark of 1,080 paired static and time-dependent instances built from OpenStreetMap road networks and controlled synthetic traffic. Finally, the report describes the intensive human-AI collaboration behind this work and the verification practices that kept its outputs independently verifiable.

We present a traffic-signal control interface in which a shared graph neural network assigns scores to individual traffic movements. Each junction converts these scores into its own variable-sized set of legal signal phases using a deterministic incidence matrix. Directed corridor nodes provide traffic context, while movement nodes represent controlled input-to-output paths through junctions. Typed mean aggregation produces one scalar per movement; phase definitions and signal timing remain outside the learned network. This makes graph size and junction-specific action count independent of the learned parameter shapes. PPO experiments evaluate the interface on unseen synthetic grid geometries, altered signal coverage, and five heterogeneous city graphs. The policies retained performance across unseen geometries within the synthetic grid family, while changes in signal coverage exposed sensitivity to a signal-coverage distribution shift. A single trained city-policy instance executed across all five city graphs, with heterogeneous outcomes. These results provide feasibility evidence rather than a general estimate of transfer to arbitrary road networks.

Independent sidewalk mobility is essential for blind and visually impaired pedestrians (BVIPs), yet smartphone-based assistive navigation requires perception models that distinguish walkable sidewalks from adjacent unsafe regions. This study presents a safety-oriented semantic segmentation framework for future mobile guidance. We introduce SENSATION-DS, a chest-height pedestrian-view dataset with 2,752 image-mask pairs and nine-class navigation-relevant taxonomy. External urban and sidewalk datasets were harmonized to this label space, and five segmentation architectures were evaluated using staged target-domain adaptation with mask-conditioned synthetic images and Segment Anything Model 2 (SAM2) pseudo-labels. Models were assessed using mean Intersection over Union (mIoU), road- and sidewalk-specific metrics, Road-as-Sidewalk Error Rate as a proxy false-safe measure, and Android Open Neural Network Exchange benchmarking. Synthetic augmentation generally improved segmentation accuracy, whereas SAM2 pseudo-labels more consistently reduced Road-as-Sidewalk errors. UPerNet-MobileNetV3 achieved the highest offline mIoU (0.715 +/- 0.006), while DeepLabV3Plus-MobileNetV3 achieved the lowest Road-as-Sidewalk Error Rate (0.079) and highest Android runtime at 512x384 (7.383 FPS). These results show that assistive sidewalk perception should be evaluated jointly by segmentation accuracy, proxy false-safe behavior, and smartphone deployment feasibility, while real-world benefit requires validation with BVIP users. This evaluation supports selecting models that balance accurate perception, conservative error behavior, and practical runtime.

Long-range vehicle trajectories provide important spatio-temporal evidence for traffic safety analysis, autonomous driving evaluation, and data-driven traffic management, yet continuously recovering them from fixed highway cameras remains difficult. As vehicles recede into distant road regions, perspective compression and scale decay often fragment or prematurely terminate automatic tracklets, even when their continuation remains identifiable from motion consistency across neighboring frames. We formulate this problem as recovering the far-range continuation of a vehicle trajectory from a reliable near-field tracklet. We introduce LoRFT, to our knowledge the first open benchmark dedicated to long-range vehicle trajectory reconstruction from fixed highway cameras. LoRFT comprises 22 expressway surveillance scenes, 366,109 video frames, 6,601 manually verified trajectories, 2,694,889 bounding boxes, road-geometry annotations, scene-level splits, and evaluation scripts. We further propose Map-RSTNet, a map-aware residual sequence-to-sequence model that reconstructs distant trajectories in a road-geometry-aligned state space and dynamically refreshes local road geometry during decoding. On LoRFT, Map-RSTNet reduces ADE, FDE, and 5-second RMSE by 11.0%, 15.4%, and 10.5%, respectively, relative to the strongest baseline. These results demonstrate that road-geometry-aware reconstruction can extend usable trajectory records from existing fixed-camera infrastructure. LoRFT provides a reproducible testbed for long-range vehicle trajectory reconstruction.

Vessel trajectory prediction in complex maritime environments is essential for traffic management, collision warning, route planning, and autonomous navigation. Although AIS-based learning methods have progressed rapidly, existing datasets are often released as raw message streams or irregular time series, with inconsistent sampling rates, noisy observations, heterogeneous coordinate systems, and non-unified scenario protocols. Most public AIS resources also lack structured representations of navigational lanes, waterway geometry, and navigable-region constraints, limiting reproducible, environment-aware forecasting. To address this, we introduce NaviAIS, a standardized scenario-level AIS dataset for vessel trajectory prediction. It organizes multi-vessel historical-future trajectories within unified temporal windows and local coordinate systems, and provides rasterized navigable maps, vectorized lane priors, lane graphs, and structured map representations. Compared with existing datasets, it jointly supports vectorized lanes, multi-scenario coverage, vectorized maps, open accessibility, and processed trajectories. Built on this dataset, we propose NaviLane, a hierarchical macro-action framework for map-aware prediction. NaviLane first performs trajectory-map joint encoding for a unified scene representation, then uses a discrete macro-action codebook to generate multimodal candidates coarse-to-refined. A residual refinement module improves local geometric and dynamical consistency, and a world-model-based consequence-aware evaluator ranks candidates by interaction risk and environmental feasibility. Experiments show NaviLane outperforms representative baselines in both single-modal and multimodal settings, confirming the value of structured navigational priors, hierarchical multimodal generation, and consequence-aware evaluation.

Expert domains are trees; the Euclidean transformer is not, diluting parent-child structure exponentially at depth. The hyperbolic turn left one question unasked: not how much of a network to curve, but where curvature may touch the gradient. Placement is a law, not a knob: the same geometry on a trainable adapter collapses training (seventeen training collapses, ~220 GPU-hours), yet at the loss layer alone it trains without one -- this is HySAT (Hyperbolic Structure-Aware Training), hyperbolic losses at the loss layer only. Across six expert SLMs we constructed and deployed (Llama 3.1 and EXAONE 3.5; four adapter strategies; 18.0M-sample corpus; zero NaN over ~317K optimizer steps), a matched four-arm ablation isolates the preserved manifold invariant, and three propositions and a lemma prove why loss-only placement is stable where adapter-on-manifold is not. Four models are operationally deployed (one live, consumer-facing), two open-weight, with per-step traces and a seventeen-incident failure ledger on Zenodo (CC-BY-4.0).

Automatically generating pedestrian pathways from aerial images requires producing a connected network suitable for routing, not just detecting where sidewalks appear. Sidewalks and crossings, in contrast to roads, may be partially occluded, implicitly defined, and exhibit complex connectivity patterns. Existing segmentation-based approaches focus on labeling pixels to infer segments, but often produce disconnected or fragmentary graphs that are unreliable for navigation. We introduce TraversRL, a vision-conditioned model that iteratively grows a pathway network from an aerial image, simulating a traveler navigating the built environment. TraversRL uses an action space of short and long direction-distance segments designed to adapt to complex patterns and span occlusions, and uses a combination of graph-level and step-wise rewards to balance overall connectivity with precise edge placement. Across three visual backbones and three intersection datasets, TraversRL substantially improves buffered IoU with the ground-truth graph relative to a state-of-the-art segmentation baseline, and more than doubles metrics of connectivity. Moreover, combining global and local rewards produces cleaner graphs with fewer spurious branches while further improving overall performance. These results demonstrate that modeling pathway extraction as a sequential decision process from the perspective of a traveler, while optimizing for final graph quality with reinforcement learning, produces significantly more reliable pedestrian networks.

Lane boundary detection is a critical component in autonomous driving systems and has been rigorously studied in regular driving scenarios. However, it is less explored in vehicle racing, where the car moves at higher speeds across more extreme road geometries. To study this problem, we introduce a new dataset for 3D lane detection in racing, featuring >$250$k images from multiple camera feeds and inertial measurements taken with a Lexus LC 500 driving on a closed circuit. With this dataset, we compare various approaches to 3D lane detection and propose modifications that permit frames to be processed at rates of almost 300Hz while retaining high predictive performance in the racing application. This facilitates a multi-camera ensemble approach that is validated on hardware. We show that sensing modalities such as inertial measurements can be leveraged for pre-integration to regress road geometries over both cameras and time, yielding improvements in key metrics. Compared to methods such as BevLaneDet, adding odometry and ensemble predictions improves the F1 score by 3 points and reduces near-vehicle mean absolute errors (MAEs) by $>30 \%$. We show F1 scores $>$0.9 and lateral MAEs of $<$0.18m in vehicle deployments.

Backpropagation is the computational engine of deep learning, yet its mathematical structure is typically treated as a procedural traversal of computational graphs. We present a global operator theory of the \emph{F-adjoint} framework, which reformulates the layerwise backward recursion of an $L$-depth feedforward network into a single linear system $(I-\cB)\Xs=\bG$, where $\bG$ is a source vector. We prove that the global backward operator $\cB$ is strictly block upper-triangular and nilpotent of index at most $L$. This nilpotency guarantees the exact termination of the Neumann series solution after at most $L$ terms, revealing classical backpropagation to be mathematically equivalent to block back-substitution on an upper bidiagonal system. We formalise \emph{F-symmetry} -- the condition in which the backward pass perfectly mirrors the forward pass -- identifying orthogonal weight matrices as canonical examples. Through worked numerical examples, we demonstrate how this operator perspective exposes the single-path collapse of strictly feedforward networks and its breakdown in residual architectures. Finally, we leverage this compositional structure to rigorously derive the mechanics of residual networks (gradient highways) and transfer learning (gradient truncation). This framework elevates backpropagation from an algorithmic recipe to a global nilpotent-operator formulation.

Ride-sharing has become an essential component of modern urban transportation and has attracted significant attention across computer science, transportation, and management science. While the field spans a broad range of problems, such as driver relocation, dynamic pricing, and vehicle charging or fueling dispatch, the core challenge remains order assignment and trip bundling, which directly affect urban traffic efficiency and carbon emissions. Despite its importance, existing simulation platforms are typically tailored to specific operational studies or tightly coupled to a particular dispatch algorithm, and rarely expose a standardized, learning-friendly interface. As a result, most researchers still build customized environments from scratch, raising serious concerns about reproducibility and fair comparison, and incurring substantial redundant effort. To address this gap, we present RideGym, the first open-source, standardized Gym-style interface tailored to MARL-based order dispatch in real-world ride-sharing systems. By fully decoupling the environment from the dispatch algorithm, RideGym enables diverse learning-based and model-based methods to be developed and compared under identical, fully specified conditions. It supports efficient, large-scale city-level simulations on real road networks, and offers flexible configurations for vehicle attributes, order specifications, and automatic shortest-path routing. We validate RideGym by reproducing several baselines, and demonstrate its high efficiency, with a one-hour simulation involving thousands of vehicles and tens of thousands of orders completed within one minute across all methods. Moreover, we reveal that the choice of exploration noise can significantly affect both the performance and the relative ranking of MARL solutions, an aspect often overlooked in prior work.

Monocular 3D lane detection plays a critical role in autonomous driving, yet recovering reliable 3D geometry from a single image remains challenging due to inherent depth ambiguity. Prior methods project image features into Bird's-Eye-View (BEV) space under a flat-ground assumption, causing geometric distortion on real-world roads. Recent methods instead predict explicit height maps to capture non-planar surfaces, but still rely on sparse anchor-based regression and exploit the recovered geometry merely for spatial transformation rather than semantic understanding. To overcome these limitations, we propose HSDF-Lane, which implicitly models the road surface as a Height-aligned Signed Distance Field (HSDF) over a densely sampled 3D feature volume. Through differentiable rendering, the HSDF jointly produces an accurate height map and surface-aligned features. We further introduce Lane-aware Semantic Positional Encoding (LSPE), which injects a lane-existence prior derived from the surface-aligned features into the transformer queries, coupling geometric structure with semantic guidance. Extensive experiments on the OpenLane benchmark show that HSDF-Lane achieves state-of-the-art performance in both 3D lane detection and height map estimation.

This paper formulates frame-level freeway risk assessment as a multi-agent scene graph-level binary classification problem, where each video or trajectory frame is labeled risky if any TTC- or PET-based conflict violates a specified severity threshold. We construct a relation-aware graph per frame with vehicles as nodes and two interaction types as edges: same-lane (longitudinal) and adjacent-lane (lateral), augmented with physics-informed edge features aligned to rear-end and lane-change conflict mechanisms. Building on a structured benchmarking suite of non-graph models and graph baselines, we propose HIA-GAT, a dual-stream heterogeneous graph attention network that processes longitudinal and lateral interactions through dedicated attention pathways and fuses them via a conflict-type-aware gating mechanism with event-level gate supervision derived from SSM conflict attribution. Experiments on the NGSIM I-80 and US-101 freeway datasets across nine TTC and PET threshold configurations show that HIA-GAT achieves the best average risk-ranking performance (AUC 0.835 on I-80 and 0.867 on US-101), with the largest gains on PET-only (lane-change) settings where relational structure is essential. Beyond accuracy, the learned gate provides interpretable per-vehicle attribution of dominant conflict type, supporting actionable, real-time freeway safety monitoring. We show that graph structure is critical for modeling lateral conflict risk, while longitudinal risk can often be captured by non-relational aggregation.

Reinforcement learning (RL) has become a prominent framework for developing driving experts in autonomous vehicles. However, most existing RL-based experts are designed to output direct control commands (e.g., throttle, steering), which suffer from a lack of interpretability, high spatial complexity in learning road geometries, and poor compatibility with modern end-to-end planning architectures. To address these limitations, we propose a novel trajectory planning architecture for RL driving experts that integrates an RL policy with a polynomial-based trajectory planner. By employing a Frenet-frame coordinate system, our method simplifies complex road geometries into a curvilinear framework, offering a structured coordinate prior that facilitates policy learning. Furthermore, we incorporate a kinematic feasibility check into the planning stage to ensure that generated trajectories remain within the vehicle's physical limits, effectively mitigating cumulative tracking errors typically found in planning-based systems. We evaluate our approach on key CARLA benchmarks, where it significantly outperforms existing state-of-the-art control-based RL experts. On the CARLA Offline Leaderboard v1 and NoCrash benchmarks, our method improves the driving score by 5% and 11%, respectively, and increases the success rate by 8% and 19%.

Numerical simulations in industrial applications often require performing numerous high-precision computations parameterized by specific experimental conditions. For instance, in vehicle body design, aerodynamic simulations are essential for evaluating the aerodynamic characteristics of various proposed body geometries. However, computational resource constraints often become a bottleneck. Therefore, achieving the desired accuracy while minimizing computational cost is crucial. To address this challenge, model reduction methods have been developed to decrease the degrees of freedom by constraining the possible states of a physical system to a lower-dimensional subspace. In particular, reduction techniques that project the system onto a nonlinear subspace using neural networks have been actively studied. Our previous research developed a reduced-order model that integrates neural-network-based model reduction with a time-evolution method, implemented as a distributed parallel training framework to process high-resolution flow field data efficiently. In this study, we extend this reduction approach by incorporating a variational autoencoder to assess its robustness in high-Reynolds-number flows around multiple vehicle bodies with varying geometries. Specifically, we evaluate the reconstruction accuracy of vortex generation across different spatial and temporal scales using a compact latent representation, with a particular focus on the flow behavior near the rear end of the vehicle body.

Text-to-image models can generate visually plausible city streets, but whether their outputs correspond to a requested road segment rather than a generic city prior remains unclear. We introduce GeoFidelity-Bench, a reference-panel benchmark for segment-conditioned geographic fidelity in street-view generation. It contains 7,117 curated Mapillary images covering 109 named OpenStreetMap road segments in 25 cities across six continents. For each generated panel, the benchmark ranks the target reference panel against panels from the nearest segment in the same city, other segments in the same city, and segments from other cities, making local discrimination rather than absolute target similarity the primary test. We evaluate six open-weight text-to-image generators under city-only, street-and-neighborhood, and GPS-augmented prompts. Adding street and neighborhood names is associated with an increase of 5.5 percentage points in top-1 retrieval accuracy over city-only prompts, with a 95% confidence interval from 3.4 to 7.7 percentage points. However, the similarity margin between the target and the nearest segment in the same city remains near zero, indicating that local names improve broad local plausibility more than exact segment identity. Prompts that keep the city fixed but use incorrect street or neighborhood names further show that only part of the gain depends on the correct local names, while appending raw GPS coordinates as ordinary text yields no statistically clear additional benefit. Held-out real-image queries successfully recover segment identity, showing that the curated references contain usable segment-level signal. GeoFidelity-Bench thus reveals a persistent gap between city- or neighborhood-plausible street-view generation and faithful generation for a specific road segment.

Predictive coding networks (PCNs) offer a biologically-plausible, local-learning alternative to back-propagation of errors (backprop). Nevertheless, they have remained largely confined to shallow architectures and evaluated on simple machine intelligence benchmarks. A central obstacle to scaling PCNs is that the learning signal decays rapidly as it propagates away from the clamped boundaries, leaving interior layers effectively unchanged. To directly counter this problem, we propose highway error propagation (HEP), a scheme that augments the free energy function underlying predictive coding (PC) by altering its neural structure with feedback matrices $V_{L\to i}$ that couple selected hidden states directly to the clamped output error. Since this coupling is linear in the hidden state, the highway pathway delivers a correction at every inference step whose magnitude is independent of depth, in contrast to vanilla PC where the output error reaches the $i$-th hidden layer with attenuation that decays exponentially in depth. This bypasses the Jacobian chain while preserving the local PC synaptic update rule. On MNIST and Fashion-MNIST, we show that HEP effectively trains MLPs of up to 128 layers with accuracy that is robust with respect to depth.

Accurate, up-to-date representations of road structures are critical for the safe operation of autonomous vehicles. Existing systems rely either on costly, maintenance-heavy high-definition (HD) maps which compromise safety when outdated, or purely sensor-based online mapping which struggles with long-range reliability and occlusion. Systems incorporating map prior information into online mapping seek to overcome drawbacks of both approaches by combining them in some way. We propose 'Driveline To HD Map' (D2HDMap), an online mapping system that injects a lightweight, non-visible driveline prior to guide the estimation of visible road structures such as lane dividers, road boundaries and crosswalks. This prior incurs less effort to create and update compared to full HD map priors used in other approaches. We also show that training with such a prior can improve generalization at inference time when no prior is available. Ablation studies conducted on the nuScenes and Argoverse 2 dataset demonstrate that models trained using a driveline prior largely retain performance even when priors are not available. On a geographically disjoint split, D2HDMap achieves 44.8 mAP, surpassing recent state-of-the-art. Additionally, noise-aware training substantially increases robustness to realistic localization error.

Online scam behavior is inherently multi-stage, and the lifecycle includes temporally ordered rails and events rather than isolated signals. Existing works analyze characteristics of scam types and rails, but they do not track scam trends across years. Moreover, the work on the relations between rails is hampered due to the lack of open-source datasets with annotations and coverage of different scam types. To address these gaps, we build a dataset to analyze the yearly trend of scam characteristics and rail paths using Reddit self-disclosure narratives from 2023 to 2025. We collect 21,304 posts from scam-related subreddits with at least one rail among identity, communication, platform, and payment for trend analysis by heuristic annotation. Then, we label 1,800 posts containing explicit or recoverable scam chains by an LLM-assisted method for scam path analysis. The method is evaluated with human annotation. Lastly, we run a topic model on the comments of the posts to analyze the community support behavior. The results reveal that scam processes are predominantly multi-rail. Across years, different scam types and rail components dominate. Different scam types vary systematically in path complexity. Reddit support behaviors have become more detailed over time. This work supports synthetic scam chain data simulation and AI-related scam risk assessment, though findings may not generalise to other platforms.

Accurate road environment modeling is fundamental to the simulation and validation of automated driving systems. However, constructing road maps in standardized formats such as ASAM OpenDRIVE from real-world sensor data remains a time-consuming and costly process. Mobile mapping LiDAR captures accurate lane-level geometry but is confined to the driven corridor, while OpenStreetMap (OSM) provides broad road network topology but lacks geometric precision at the lane level. To address this, an automated workflow is proposed to fuse LiDAR point clouds with OSM data to generate georeferenced ASAM OpenDRIVE maps of highway environments, requiring minimal manual intervention. The pipeline reconstructs mainline roads from LiDAR-derived measurements and infers ramp geometry and topology from the OSM road graph, enabling complete highway interchange modeling without full sensor coverage. Experiments demonstrate a mean lateral RMSE of 0.740 m, and the generated maps are directly usable in mainstream simulation platforms including IPG CarMaker and Esmini. These results validate the effectiveness of combining measurement-derived geometry with map-derived topology for automated OpenDRIVE digital twin generation. The project code is available at https://github.com/ftgTUGraz/opendrive-digital-twin-generator

This paper presents an implemented CARLA-VISSIM co-simulation framework for an urban corridor comprising approximately fifteen connected intersections centered on Martin Luther King Jr. Boulevard in Chattanooga, Tennessee. The system integrates CARLA 0.10.0 Unreal Engine 5 with PTV VISSIM 2026 through a bidirectional, step-synchronized interface that couples VISSIM's microscopic vehicle, pedestrian, and signal-controller logic with CARLA's high-fidelity 3D rendering. A LiDAR-derived elevation model and RoadRunner-based High Definition (HD) map provide terrain-accurate road geometry deployed consistently across both simulators. The framework incorporates explicit actor ownership, mirrored lifecycle management, coordinate reconciliation, and a latest-state-per-actor update policy, enabling stable interaction between VISSIM-controlled traffic and a CARLA-controlled ego vehicle. A corridor-scale case study demonstrates consistent traffic-signal mirroring, synchronized vehicle-pedestrian interactions, and stable mixed-authority operation under peak loads of approximately 100 vehicles and 100 pedestrians. The deployment captures the interaction of the five signalized intersections along MLK Street and their connecting upstream and downstream intersections, revealing synchronization challenges unique to multi-intersection corridors. Results indicate that this MLK-centered corridor provides an effective testbed for verifying cross-simulator consistency and that the proposed architecture supports reliable, perception-ready co-simulation for corridor-level traffic studies.

Reducing real-world trial and error has long been a central goal of decision making, and generative simulators advance this goal by modeling the evolution of future states. An even more challenging yet meaningful task is simulating how disturbance events (e.g., accidents) propagate their impacts across real-world networks. The existing approaches fall short of modeling both structured attributes and unstructured semantics of events, and capturing topological structures in simulating network event evolution. Therefore, we are motivated to propose Net-Ev$^2$ ($\underline{\textbf{Net}}$work $\underline{\textbf{Ev}}$ent $\underline{\textbf{Ev}}$olution), a novel generative simulator that jointly leverages event cues while preserving network topology in simulations. Specifically, the framework consists of two stages, namely structure-guided masked pre-training and topology-aware diffusion process, which is achieved by U-Net-like graph downsampling and upsampling during denoising. At inference time, Net-Ev$^2$ can generate simulations using natural-language event input only, with greater flexibility for practical usage. Furthermore, we introduce Net-Ev$^2$-6.5M, a multimodal benchmark of aligned event and network traffic data across four large-scale road networks, as well as a new topology-aware metric, namely JL-MMD, to evaluate topological fidelity in generated network dynamics. Extensive experiments demonstrate the state-of-the-art performance and strong generalization ability of Net-Ev$^2$. Code is made available at https://github.com/Guangyu4/Net-Ev-2.

Across contemplative, philosophical, and psychological accounts, human consciousness is often described along a similar spectrum, ranging from reactive and self-focused patterns to more integrative and coherent ones. Understanding whether language models encode such a structured, human-interpretable consciousness spectrum in representation space is important for model guidance, evaluation and alignment. In this work, we study the geometric structure and dynamics of patterns along this spectrum in transformer embedding spaces. We show that embeddings exhibit a globally organized geometry aligned with this spectrum: sentences associated with similar states cluster into locally coherent regions, forming a structured manifold. In particular, higher-level and lower-level regions exhibit convexity-like stability, while intermediate regions form a transition corridor. Dynamically, both utility-guided and geometry-only greedy trajectories consistently traverse from lower- to higher-level regions, passing through intermediate tiers, indicating that navigability is an intrinsic property of the representation space, guided but not dictated by a global directional signal. These results suggest that embedding spaces encode structured and navigable geometry aligned with a hypothesized consciousness-spectrum taxonomy, broadly inspired by recurring structural descriptions of human consciousness across contemplative traditions, philosophy, and modern psychology, providing a representation-level perspective for analyzing and guiding model behavior.

Although much is known about the physical danger of cycling situations, less is understood about the perceived danger of cycling. Furthermore, perception of danger may be filtered at a subconscious level and therefore difficult for one to self-report. To this end, these subconscious perceptions can be revealed through physiological metrics such as eye gaze. This paper explores the perceived safety of cycling in Oxford, United Kingdom and explores the ability of wearable eye tracking glasses to produce insights about the differences in perception under different environments and events. This paper finds that eye gaze patterns change between using bike lanes, car lanes and shared bus lanes, representing different cognitive challenges of each lane type. This paper presents that different intersections have significantly different eye gaze patterns which may have implications for cyclist stress. Finally, eye gaze patterns differ in the presence of events such as passes and pedestrians in the road compared to when cycling with no events. This paper draws conclusions on the benefits and limitations of using wearable eye trackers to estimate stress and cyclist workload.

Lane-level maps are critical infrastructure for autonomous driving and lane-level navigation, yet constructing and maintaining standardized lane networks for hundreds of cities remains highly labor-intensive. Recent end-to-end vectorized mapping methods can predict lane geometry and topology directly from sensor data, but they typically treat mapping specifications and traffic regulations as implicit, dataset-dependent supervision. Moreover, in complex scenes (e.g., worn or missing markings and occlusions), correct lane configurations are often under-determined by visual evidence alone, making specification violations a major source of human post-editing. We propose MapAgent, an industrial-grade agentic architecture that augments a vectorization backbone for specification-compliant lane-map production. Rather than merely adding an agent loop to map prediction, MapAgent couples backbone perception with explicit specification verification, constraint-aware reasoning, and deterministic map editing under a bounded, verification-driven Judge-Planner-Worker loop. A vision-language Judge diagnoses errors by jointly inspecting visual evidence and draft vectors, while a tool-calling Planner generates minimal corrective edits with post-edit re-validation. To remain scalable for city-scale production, MapAgent is selectively triggered only on tiles with low backbone confidence, adding modest overhead while preserving throughput. Experiments on real-world datasets show consistent gains over strong production baselines, especially in complex and long-tail scenarios. Additionally, MapAgent has been integrated into Baidu Maps, supporting lane-level map generation for over 360 cities nationwide and elevating the overall production automation to over 95%, demonstrating MapAgent's practicality and effectiveness for large-scale lane-level map generation.

Learning a single policy that reaches a goal with high geometric precision while interacting safely with nearby agents poses conflicting objectives. Precision favors commitment to a fixed geometric plan, whereas interaction requires immediate deviation when another agent intrudes, causing policies optimized for one objective to often fail at the other. We study this problem in the context of reactive autonomous parking, where multiple vehicles must reach assigned slots with sub-meter terminal accuracy while remaining responsive to neighboring vehicles throughout the maneuver. We propose CoPark, a multi-agent self-play RL approach built on a residual-policy architecture. A precomputed offline plan provides a fixed action prior, while a residual head learns the reactive corrections. The residual policy learns behaviors under self-play, where data and scripting fall short, while the fixed prior holds the slot-frame geometry that pure policies struggle to reach reliably. The key design is a partner-threat-modulated, channel-asymmetric release of the prior. A continuous threat signal shifts authority of the longitudinal channel to the residual head to enable yielding, while the lateral channel remains anchored to the precomputed reference to preserve sub-meter slot alignment. A closed-loop refinement layer corrects residual terminal error from action-grid discretization. We train our policy on six parking lots and evaluate zero-shot on our new reactive-parking benchmark spanning Dragon Lake Parking (DLP) and DeepScenario Open 3D (DSC3D). CoPark achieves ~70-85% success with only 3-6% collision rate, substantially outperforming classical, imitation-learning, and large-scale RL baselines. Importantly, the results demonstrate emergent interaction behaviors such as reverse-yielding, mid-maneuver yielding, tight-corridor passing, and queuing.

Benchmarking shortest-path algorithms is commonly based on aggregate performance over heterogeneous graph sets, which limits insight into how different search paradigms react to instance structure. We adopt an instance-landscape view of graph benchmarking by embedding graphs into a low-cost structural feature space and clustering them into regions of similar structure. Three benchmark suites are studied: weighted Erdős--Rényi graphs, random geometric (wireless) graphs, and real-world road networks. We evaluate four representative shortest-path solvers spanning uninformed exact search (Dijkstra), bidirectional exact search (bidirectional Dijkstra), heuristic-guided exact search (A$^{*}$), and deque-based strategies (DEQ). Clustering robustness is analyzed under multiple feature-selection schemes, and runtime distributions are compared across landscape regions using non-parametric tests. While generator parameters induce stable structural regions, we find that feature-space similarity does not necessarily imply performance similarity: significant runtime shifts are frequently observed even within the same landscape region. A merged-suite analysis further shows that different benchmark families occupy largely disjoint regions. These results highlight both the potential and the limits of structural landscapes for the structure-aware benchmarking of shortest-path algorithms.

As a widespread form of informal settlements, urban villages present significant challenges for sustainable urban development and governance. Precise mapping of their infrastructure is essential, however, existing remote sensing datasets primarily focus on formal urban environments, lacking fine-grained annotated data for the high-density building patterns and narrow road networks typical of urban villages. To address this gap, we introduce the \textit{DenseUIS} dataset, the first high-resolution remote sensing dataset specifically designed for building and road extraction in extremely dense urban informal settlements, covering 126 urban villages across Shenzhen and Guangzhou in China. Furthermore, we conduct a comprehensive evaluation of state-of-the-art deep learning models on this dataset. Experimental results reveal the limitations of existing methods in handling the unique morphological patterns of dense informal settlements, underscoring the need for specialized approaches. \textit{DenseUIS} therefore provides a robust benchmark for advancing fine-grained urban mapping in complex and high-density informal environments. The dataset is publicly available at https://github.com/rui-research/DenseUIS.

Accurate road segmentation from aerial imagery is fundamental to many geospatial applications. However, existing datasets often suffer from limited scene diversity, low semantic granularity, and poor structural continuity, restricting their generalization across environments. To address these challenges, we introduce WorldRoadSeg-360K, the largest and most diverse road segmentation dataset to date, comprising 366,947 high-resolution images collected from 38 countries and 223 cities across various terrains and continents. WorldRoadSeg-360K serves as a comprehensive benchmark and reveals key challenges in handling diverse and structurally complex scenes. Automated approaches often struggle to preserve road connectivity, while current interactive methods lack efficient, topology-sensitive tools for real-world road editing. To this end, we present RoadGIE, establishing a novel interactive paradigm for road extraction in remote sensing. Unlike prior point- or box-based prompting strategies, RoadGIE supports connectivity-aware prompts, including clicks and scribbles, which inherently align with the topology of road networks. To improve structural consistency and mitigate performance degradation during iterative interactions, RoadGIE integrates an expert-guided prompting strategy and adapts the skeleton-based recall loss for interactive scenarios. RoadGIE achieves state-of-the-art performance in both segmentation accuracy and topological consistency on WorldRoadSeg-360K and other benchmarks, while maintaining efficient operation with only 3.7M parameters. The code are publicly available at: https://github.com/chaineypung/RoadGIE

3D Gaussian Splatting (3DGS) has shown great potential in autonomous driving simulation and data generation, enabling photorealistic reconstruction and flexible scene manipulation. However, existing 3DGS scene editing methods have limited support for road geometry editing (e.g., inserting speed humps or sunken roads), and generally do not couple such edits with plausible vehicle-road interaction dynamics. Such editing is essential for generating training data under extreme driving scenarios or evaluating system reliability under these road irregularities. Moreover, many optimization-based methods require minutes of per-edit refinement, while existing efficient alternatives mainly focus on appearance-level or object-level manipulation rather than physics-aware road irregularity editing. To address these limitations, we propose RoVES, a Road-and-Vehicle Editing System for physics-aware 3D Gaussian editing in driving scenes. RoVES enables single-image-driven road geometry insertion and couples the edited road profile with a 4-DOF half-car vehicle dynamics model to achieve physics-aware vehicle pose correction in vertical displacement and pitch. RoVES inserts road elements in a one-shot, optimization-free pipeline (1.84s), and the full pipeline (including color transfer and vehicle-dynamics-based pose correction) completes in 6.24s; it edits dynamic vehicles via pose editing and corrects poses frame-by-frame to approximate dynamics-consistent vertical displacement and pitch responses. Experiments on the Waymo dataset show that RoVES provides practical efficiency and competitive visual consistency for physics-aware driving scene generation.

Structured road understanding of lane geometry, topology, and traffic element relationships is foundational to safe autonomous driving. While vision-language models (VLMs) offer promising semantic flexibility, they lack the geometric and relational grounding required for precise road reasoning. Conversely, traditional modular systems, e.g., HD maps and topological road graphs, provide structural precision but remain semantically rigid. To bridge this gap, we introduce the Combined Road Substrate (CRS), a graph-grounded framework that makes geometric road structure and open-vocabulary semantics jointly executable in a single representation. CRS enables the automatic generation of compositionally complex and linguistically varied question-answer pairs via recursive graph queries, augmented with a "grounding for free" mechanism that ensures logical traceability to specific map elements, and procedurally extracted chain-of-thought supervision traces. We demonstrate that state-of-the-art VLMs - including large, closed-source models - struggle significantly with structured road reasoning, yet training a small 2- or 4-billion-parameter model with as few as 20 to 80 CRS-enriched scenes yields stable gains in compositional reasoning tasks of varying depth. Analysis of model behavior via verifiable reasoning traces reveals a systematic shift in failure modes: whereas baseline models fail at relational scene understanding, CRS-trained models reduce failures to attribute recognition, suggesting that the primary bottleneck in road understanding is not model scale, but the absence of structured supervision.

We introduce Action-Inspired Generative Models (AGMs), a dual-network generative framework motivated by the observation that existing bridge-matching methods assign uniform regression weight to every stochastic transition in the transport landscape, regardless of whether a given bridge sample lies along a structurally coherent trajectory or a degenerate one. We address this by introducing a lightweight learned scalar potential $V_φ$ that scores bridge samples online and modulates the drift objective via importance weights derived through a stop-gradient barrier -- preventing adversarial feedback between the two networks whilst preserving $V_φ$'s guiding signal. Crucially, $V_φ$ comprises only $\sim$1.4% of the primary drift network's parameter count, adds no overhead to the inference graph, and requires no iterative half-bridge fitting or auxiliary stochastic differential equation (SDE) solvers: it is a plug-and-play enhancement to any bridge-matching training loop. At inference, $V_φ$ is discarded entirely, leaving standard Euler-Maruyama integration of the exponential moving average (EMA) drift. We demonstrate that selectively penalising uninformative transport paths through the learned potential yields consistent improvements in generation quality across fidelity and coverage metrics.

This paper considers fixed-wing unmanned aerial vehicle (UAV) corridors comprising a main lane, a circular loiter lane for managing traffic congestion, and transit lanes connecting the two. In particular, we address the problem of conflict-free reinsertion of UAVs from the loiter lane back into the main lane. The loiter lane contains a fixed number of equidistant virtual slots that UAVs can occupy. Reinsertion of loiter UAVs into the main lane becomes essential either due to reduced traffic in the main lane or due to a loiter UAV needing to reach its destination urgently. Given the total number of loiter slots, UAV speed limits, and the minimum safety distance, a guidance algorithm is developed to compute the required speed of a loiter UAV in the transit lane to ensure safe reinsertion. The proposed guidance and automation strategies are validated through numerical simulations.

In automated driving, crash mitigation is crucial to ensure passenger safety. Accurate avoidance requires precise knowledge of the object's position and orientation. However, sensor noise and occlusions often result in tracking and prediction uncertainties. To account for these uncertainties, estimating the Probability of Collision (POC) is a critical requirement. While Monte Carlo sampling is a common estimation technique, its high computational demand and stochastic nature often render it unsuitable for real-time applications. Analytical POC calculations are simplified by approximating vehicle geometries using circular bounds. While multi-circle approximations offer higher fidelity than a single circumscribed circle, they significantly increase computational complexity. This paper proposes a shape approximation algorithm, MoCCA, which utilizes a single circle for each vehicle, optimized to minimize the relative distance between them. MoCCA maintains a computational efficiency comparable to standard single-circle techniques while reducing over-conservatism. To address the potential underestimation of POC inherent in partial coverage, we establish an upper bound for the approximation error, demonstrating that it depends primarily on inter-vehicle distance and orientation variance. Furthermore, we introduce a safety distance margin that can be calibrated solely based on orientation variance.

Unmanned aerial vehicles (UAVs) can provide flexible traffic surveillance where fixed roadside cameras are unavailable, costly, or impractical. However, raw UAV video is difficult to use for traffic analytics because vehicle motion is observed in perspective image coordinates rather than in a stable metric road coordinate system. This paper presents a lightweight pipeline for converting monocular oblique UAV traffic video into a local metric bird's-eye-view (BEV) representation. Visible road geometry, including lane markings, road borders, and crosswalks, is used to estimate a road-plane homography from image coordinates to metric ground-plane coordinates. Vehicle observations from dataset annotations or detectors are then projected to BEV using estimated ground contact points. The resulting trajectories support estimation of vehicle direction, speed, heading, and dynamic 3D cuboids on the road plane. We evaluate the pipeline on UAVDT using ground-truth annotations to isolate calibration and geometric reconstruction from detector and tracker errors. For sequence M1401, 40 sampled frames from img000001-img000196 produce 632 metric cuboid instances across 23 tracks. Results show that road-geometry calibration can transform monocular UAV footage into interpretable traffic-camera-style analytics, including BEV tracks and synchronized 3D cuboid visualizations. They also reveal key limitations: far-field vehicles are sensitive to homography errors, manual validation is currently more reliable than fully automatic calibration, and the single-plane assumption limits performance in non-planar or ambiguous road regions. The proposed pipeline provides a practical foundation for deployable UAV traffic cameras and future real-time traffic digital-twin systems.

Highway construction workers face a high risk of serious injury or death. Image-based training materials depicting hazardous scenarios are essential for engaging safety instruction but remain scarce due to ethical and logistical barriers. This study develops and evaluates a generative AI methodology for producing synthetic visualizations of highway construction hazards from OSHA Severe Injury Report narratives. Two modes were developed: a single-pass approach yielding one image per incident, and a temporal approach producing a four-stage sequence. A sample of 75 incident records yielded 750 images, evaluated using CLIP-based semantic retrieval and expert assessment across dimensions such as educational utility, fidelity, and alignment. Single-pass images achieved 81.1% educational acceptability with fidelity and alignment scores of 4.14/5 and 4.07/5, respectively, while temporal sequences achieved 60.9% acceptability with comparable alignment (3.94/5) but lower fidelity (3.51/5). CLIP-based retrieval revealed that both modes produce images with statistically significant retrieval capabilities. This is among the first studies to leverage modern autoregressive image generation models for visualizing construction hazards from reported severe injuries and to generate temporally sequenced hazard imagery, and a new multi-dimensional evaluation framework was developed to support future research in this domain. The work enables safety trainers to pair narrative storytelling with visual learning material without photographing real-world hazards, and the framework could be applied to datasets across diverse domains, enabling synthetic image generation tailored to new application areas.

Rural thematic road network construction aims to extract topological road structures from movement trajectory images of agricultural machinery. However, this task faces challenges where downsampling methods commonly used in existing studies tend to blur the sparse high-frequency road structures, and the heavy noise from dense field operations often leads to fragmented or redundant topologies in the extracted networks. To address these challenges, we propose LFINet, a Laplacian Frequency Interaction Network. The network begins with a Laplacian Multi-scale Separator (LMS) to decouple the image into low-frequency semantic contexts and high-frequency structural details. These components are then processed by the Cross-Frequency Interaction Block (CFIB) through a dual-pathway architecture in which a High-Frequency Block (HFB) refines local structures while a Spatial Transformer (ST) captures global semantics. Subsequently, a Frequency Gated Modulation (FGM) mechanism integrates the features from pathways by leveraging semantic contexts to calibrate the structural details. Finally, a Progressive Reconstruction Decoder iteratively fuses multi-scale features to ensure topological consistency. Experiments conducted on a real-world agricultural trajectories dataset from Henan Province, China, show that LFINet establishes a new state-of-the-art. Specifically, it achieves an F1-score of 92.54% and an IoU of 86.12%, surpassing the second-ranked method by 0.64% and 1.1%, respectively. This confirms its capability to effectively construct topological road networks from noisy and sparse field data.

Although intersections are the most complex parts of the roadway network, pedestrian crashes at non-intersection locations are disproportionately frequent, highlighting a serious traffic safety concern. This study investigates non-intersection crashes involving pedestrians using a crash database (2017-2021) collected from Louisiana State. As the risk of pedestrian crashes tends to vary with distance from the intersection, the research team utilized a unique framework "distance to intersection" to capture the differences in crash patterns at non-intersection locations. The study identified that around 50% of non-intersection pedestrian crashes occurred within 198 ft. of the intersection. In the next step, the collected 3,135 pedestrian crashes at non-intersection locations during the study period were subdivided into three zones: D1 zone designates crashes occurring within 150 ft. of an intersection (1,277 crashes), D2 zone designates crashes occurring within 151 ft. to 435 ft. of an intersection (1,060 crashes) and D3 zone designates crashes occurring at 435 ft. or higher from an intersection (798 crashes). To explore the complex interaction of multiple factors, an intuitive data mining technique, Association Rules Mining was used. A total of the top 60 interesting association rules (20 for each zone) were identified by the algorithm (based on lift and support measures). In addition, a total of 124 rules were explored based on Lift Increase Criterion (LIC) measure. The findings of this research provide critical insights into pedestrian crash involvement at non-intersection locations and the variation in crash patterns according to the "distance to intersection". Based on the findings, some of the targeted problem-specific countermeasures are also recommended to address the crash patterns at non-intersection locations.

Driving agents trained in one simulated town often perform poorly in a new town because the road shapes, intersections, and lane layouts can be different. This paper studies how to improve this kind of transfer in the CARLA driving simulator without giving the agent any training data from the test towns. The agent is trained only in Town05 and Town06, then evaluated directly in Town03 and Town04. To focus on road-layout differences, all experiments use the same weather and traffic settings. We propose a training method that encourages the agent to learn features that are useful across towns rather than features tied to one training town. During training, the agent is asked to predict the high-level visual meaning of future camera views and is also discouraged from relying on cues that reveal which source town the data came from. These extra learning signals are used only during training; at test time, the driving policy uses the same observation and control interface as the baseline agent. In controlled comparisons with matched DreamerV3-style world-model driving agents, the proposed method achieves the highest mean held-out success: 36.6% on Town03 with a 95% confidence interval of [30.5, 42.7] and 85.6% on Town04 with a 95% confidence interval of [84.0, 87.2], computed across five training seeds. Seed-paired tests against the strongest primary baselines show positive success-rate differences in both held-out towns. Additional experiments show that predicting future visual meaning alone or removing town-specific cues alone is not enough to match the combined method. These results suggest that combining future-scene understanding with reduced reliance on source-town-specific features can improve cross-town driving performance in this CARLA setting.

This paper addresses the Dynamic UGV-UAV Cooperative Path Planning (DUCPP) problem involving one unmanned ground vehicle (UGV) assisted by one or more unmanned aerial vehicles (UAVs) operating on an uncertain road network with potentially impassable edges. DUCPP is particularly relevant for scenarios such as disaster response, emergency supply transport, and rescue operations, where a UGV must reach a specified destination in the presence of partially unknown road conditions. To enable the UGV to travel safely and efficiently to its destination, the UAV(s) dynamically inspect edges in the environment to identify and prune damaged or impassable edges from consideration. We present multiple strategies, including a bidirectional approach, to optimize UGV-UAV cooperation for finding a safe path in an uncertain road network. Furthermore, we explore the impact of using multiple UAVs on reducing the UGV's travel time, and evaluate the associated computation time. The proposed strategies are implemented and evaluated on 100 urban road networks. The results demonstrate that the bidirectional strategy achieves the best performance in most instances, and using multiple UAVs further reduces UGV travel time at the expense of increased computation time. This paper presents a robust framework for DUCPP to achieve efficient UGV-UAV cooperation for path planning and inspection, offering practical solutions for navigation in challenging and uncertain conditions.

Localization for autonomous vehicles on highways remains under-explored compared to urban roads, and state-of-the-art methods for urban scenes degrade when directly applied to highways. We identify key challenges including environment changes under information homogeneity, heavy occlusion, degraded GNSS signals, and stringent downstream requirements on accuracy and latency. We propose a robust localization system to address highway challenges, which uses a dual-likelihood LiDAR front end that decouples 3D geometric structures and 2D road-texture cues to handle environment changes; a Control-EKF further leverages steering and acceleration commands to reduce lag and improve closed-loop behavior. An automated offline mapping and ground-truth pipeline keep maps fresh at high cadence for optimal localization performance. To catalyze progress, we release a public dataset covering both urban roads and highways while focusing on representative challenging highway clips, totaling 163 km; benchmarking is standardized using product-oriented accuracy metrics and certified ground truth. Compared to Apollo and Autoware, our system performs similarly on urban roads but shows superior robustness on challenging highway scenarios. The system has been validated by more than one million kilometers of road testing.

Mobility in urban and interurban areas, mainly by cars, is a day-to-day activity of many people. However, some of its main drawbacks are traffic jams and accidents. Newly made vehicles have pre-installed driving evaluation systems, which can prevent accidents. However, most cars on our roads do not have driver assessment systems. In this paper, we propose an approach for recognising driving styles and enabling drivers to reach safer and more efficient driving. The system consists of two physical sensors connected to a device node with a display and a speaker. An artificial neural network (ANN) is included in the node, which analyses the data from the sensors, and then recognises the driving style. When an abnormal driving pattern is detected, the speaker will play a warning message. The prototype was assembled and tested using an interurban road, in particular on a conventional road with three driving styles. The gathered data were used to train and validate the ANN. Results, in terms of accuracy, indicate that better accuracy is obtained when the velocity, position (latitude and longitude), time, and turning speed for the 3-axis are used, offering an average accuracy of 83%. If the classification is performed considering just two driving styles, normal and aggressive, then the accuracy reaches 92%. When the geo-information and time data are included, the main novelty of this paper, the classification accuracy is improved by 13%.

An adaptive structural learning method of Restricted Boltzmann Machine (RBM) and Deep Belief Network (DBN) has been developed as one of prominent deep learning models. The neuron generation-annihilation algorithm in RBM and layer generation algorithm in DBN make an optimal network structure for given input during the learning. In this paper, our model is applied to an automatic recognition method of road network system, called RoadTracer. RoadTracer can generate a road map on the ground surface from aerial photograph data. A novel method of RoadTracer using the Teacher-Student based ensemble learning model of Adaptive DBN is proposed, since the road maps contain many complicated features so that a model with high representation power to detect should be required. The experimental results showed the detection accuracy of the proposed model was improved from 40.0% to 89.0% on average in the seven major cities among the test dataset. In addition, we challenged to apply our method to the detection of available roads when landslide by natural disaster is occurred, in order to rapidly obtain a way of transportation. For fast inference, a small size of the trained model was implemented on a small embedded edge device as lightweight deep learning. We reported the detection results for the satellite image before and after the rainfall disaster in Japan. This version of the article was improved the search algorithm at the border around image.

Trajectory representation learning (TRL) aims to encode raw trajectory data into low-dimensional embeddings for downstream tasks such as travel time estimation, mobility prediction, and trajectory similarity analysis. From a behavioral perspective, a trajectory reflects a sequence of route choices within an urban environment. However, most existing TRL methods ignore this underlying decision-making process and instead treat trajectories as static, passive spatiotemporal sequences, thereby limiting the semantic richness of the learned representations. To bridge this gap, we propose CORE, a TRL framework that integrates context-aware route choice semantics into trajectory embeddings. CORE first incorporates a multi-granular Environment Perception Module, which leverages large language models (LLMs) to distill environmental semantics from point of interest (POI) distributions, thereby constructing a context-enriched road network. Building upon this backbone, CORE employs a Route Choice Encoder with a mixture-of-experts (MoE) architecture, which captures route choice patterns by jointly leveraging the context-enriched road network and navigational factors. Finally, a Transformer encoder aggregates the route-choice-aware representations into a global trajectory embedding. Extensive experiments on 4 real-world datasets across 6 downstream tasks demonstrate that CORE consistently outperforms 15 state-of-the-art TRL methods, achieving an average improvement of 9.20% over the best-performing baseline. Our code is available at https://github.com/caoji2001/CORE.