Unmanned Aerial Vehicles

Reliable terrain understanding is a prerequisite for autonomous robot navigation. Yet, the widespread RGB-based perception can fail under low illumination, shadows, and material ambiguities. In this work we propose DRIFT, a lightweight multispectral framework that combines raw spectral bands and illumination-tolerant band-ratio representations through a dual-stream residual architecture and a differential fusion branch. Band ratios attenuate multiplicative acquisition effects (illumination/sensor gains), while the differential fusion explicitly highlights discrepancies between absolute-band and ratio-derived cues, which improves the robustness to noisy or partially unreliable spectral measurements. In the paper (i) we evaluate DRIFT on a new oil-on-soil multispectral dataset acquired using a MicaSense RedEdge-P camera mounted on an Unmanned Aerial Vehicle, and (ii) we provide an additional controlled study on water-on-grass under varying illumination and thermal perturbations (hot/cold water) to analyze NIR-sensitive effects. DRIFT consistently improves over strong baselines, while remaining compatible with edge deployment.

A central challenge in image-goal UAV navigation under Global Navigation Satellite System (GNSS) denial is estimating metric distance and heading between current and goal views. Dense pairwise geometry models capture relative scene structure, but without a calibrated metric scale, they cannot directly provide reliable distance estimates for navigation. Although global scale calibration corrects the dominant scale bias, the remaining errors vary systematically with distance. In this paper, Range-Aware Scale Recovery (RASR) is proposed, which complements global scale calibration with range-aware residual correction. RASR encodes pairwise geometry extracted by a frozen Matching And Stereo 3D Reconstruction (MASt3R) backbone as a compact descriptor and separates the scale-recovery core from task-specific command calibration. On the official online evaluation of the UAVs in Multimedia 2026 PairUAV challenge, RASR achieved a total error of 0.003189, achieving a lower total error than global scale calibration alone. The results demonstrate that range-aware residual correction improves metric distance estimation beyond global scale calibration. Code and materials are available at https://github.com/lht-research/rasr-pairuav.

Object detection is a fundamental component in numerous Unmanned Aerial Vehicle (UAV) applications, yet it has long been plagued by hindrances like occlusion or target pixel scarcity. Active Object Detection (AOD) provides a novel paradigm to address these challenges via active vision, while UAV-based AOD research remains scarce due to the lack of high-quality datasets and benchmarks for algorithm development and evaluation. To fill this gap, this paper presents ATRNet-LUDO, the first large-scale real-world dataset for UAV-Ground Active Object Detection (UGAOD). It contains 121,000 multi-view panoramic multi-target aerial images and 1.21 million local single-target slices, covering 10 vehicle targets across 40 scenarios. It enables the construction of diverse training and testing environments for UAV agent interaction and active observation policy learning. Based on this dataset, we establish a comprehensive evaluation benchmark for AOD policy learning methods. Most existing AOD policies rely on Deep Reinforcement Learning (DRL) but suffer from poor generalization. Evaluations on our benchmark reveal a significant generalization gap between training and testing performance, highlighting an urgent need for solutions. To this end, we leverage the Joint Embedding Predictive Architecture (JEPA) to construct a world model that enhances state representation learning, and propose AOD-JEPA by incorporating AOD-specific prior knowledge. Extensive experiments validate its effectiveness and superiority. We hope ATRNet-LUDO and the benchmark will advance research in the UGAOD field. The dataset and code are soon available at https://github.com/Leo000ooo/LUDO_dataset.

Unmanned Aerial Vehicle (UAV) videos are widely used in traffic monitoring, urban management, and emergency rescue. However, existing UAV video perception mainly relies on box-level localization and trajectory association under predefined categories, making it difficult to simultaneously support flexible queries and fine-grained instance-level dynamic understanding in open scenarios. To this end, we introduce a new task, UAV Open-Vocabulary Video Instance Segmentation (UAV-OVVIS), which discovers targets in UAV videos according to open-vocabulary queries and outputs instance-level segmentation trajectories with globally consistent identities. Considering the scarcity of instance-level annotations in UAV scenarios, we propose AeroTrack, a training-free unified framework. AeroTrack centers on periodic open-vocabulary detection, short-segment mask propagation, and cross-segment identity unification, reusing existing visual foundation models to enable UAV-OVVIS. Based on this framework, we instantiate five AeroTrack variants and construct AeroVIS, an evaluation benchmark for UAV-OVVIS containing 9 UAV object categories and 8,279 trajectories. Experiments show that AeroTrack substantially outperforms existing general video instance segmentation methods in UAV scenarios and demonstrates strong open-vocabulary robustness and generalization. To support future research, we release AeroTrack and AeroVIS as a unified framework and benchmark for UAV-OVVIS.

GNSS-denied unmanned aerial vehicles require occasional absolute position fixes to bound the drift of visual-inertial odometry. Cross-view image retrieval can provide such fixes, but raw appearance is sensitive to season, illumination, viewpoint, map age, and sensor modality. We propose \sas, a semantic map-localization framework that represents the environment through persistent structures such as roads, buildings, waterways, railways, intersections, and field boundaries. The method combines semantic raster alignment, relational graph evidence, feature stability and geographic distinctiveness, explicit positive/contradictory/unknown observations, and integrity-aware rejection of ambiguous fixes. Unlike a broad architecture-only proposal, this paper specifies concrete weighting and decision models and reports a reproducible synthetic proof of concept. In 220 randomized retrieval trials with rotation, scale changes, partial crops, occlusion, simulated map changes, and hard semantic decoys, a global semantic descriptor achieved 58.6% Recall@1, while spatial semantic matching variants achieved 94.5-95.5%. Wilson 95% intervals separate the global descriptor from the spatial variants but overlap among the spatial variants, so the experiment supports semantic geometry rather than a definitive benefit from each proposed module. The preliminary experiment does not validate real-flight navigation; rather, it demonstrates that structured semantic geometry can discriminate locations under controlled cross-view perturbations and identifies the harder aliasing, map-aging, and rejection tests required next.

The low-altitude economy is an emerging industry with significant development potential, in which the safety of unmanned aerial vehicle (UAV) operations is a critical challenge. Particularly within complex urban topographies and human-populated environments, UAV airspace management must prioritize collision avoidance and human safety. We propose Pharos, a collaborative multi-UAV airspace management system. Pharos lies between the distributed local perception paradigm and the centralized fine-grained control paradigm. Pharos coordinates the safe parallel execution of UAVs in shared airspace while innovatively accounting for the impact of human fear. Pharos is implemented using the MAPPO algorithm due to its faster convergence and higher rewards than other typical MARL algorithms (HAPPO and HATRPO). To evaluate Pharos, we developed a 3D simulation system using real urban data. Visualization results demonstrate its effective airspace coordination capability. Regarding performance verification, Pharos reduced human fear by 52.72% compared to the benchmark Ipopt. Moreover, we designed spatial entropy as a system evaluation metric to quantify space utilization, which improved performance by 70.82% and 2.03% compared to the benchmarks Ipopt and A-star, respectively. The source code is available at an anonymized repository: https://github.com/pharos-anonymized/source-code.git.

Fog severely degrades the visibility of small unmanned aerial vehicles (UAVs) in skydominant, long-range imagery, reducing the reliability of downstream detection and tracking. This paper presents a task-driven evaluation framework that links depth-aware synthetic fog generation, image restoration, object detection, and tracking within a unified pipeline. Given the practical difficulty of collecting and annotating foggy UAV scenes, synthetic fog is generated from real clear-weather outdoor images containing UAV targets using monocular depth estimation and the atmospheric scattering model. Representative restoration methods from classical, convolutional neural network (CNN)-based, and transformer-based families are first compared, after which the selected restoration model is integrated into the downstream perception pipeline. Detection is evaluated under both clean-only and fog-inclusive training regimes using multiple detector variants, while tracking-by-detection is assessed on clean, foggy, and restored video sequences. Beyond image-level restoration metrics, the study evaluates how fog and restoration affect detection robustness and tracking performance. The results show that fog substantially degrades both detection and tracking, primarily through increased missed detections. Fog-inclusive training provides the most consistent improvement in robustness, whereas test-time restoration is most beneficial when the detector has been trained only on clean imagery. These findings show that restoration quality does not necessarily translate into proportional gains in downstream perception and therefore should be evaluated jointly with detection and tracking performance.

In this work, we study the last-meter precision navigation for UAVs, e.g., autonomously reaching a target within the final 10 meters using monocular vision. This task is challenging due to scale ambiguity, rotation discontinuities, and the need for fine-grained spatial reasoning. Existing methods often fail under large viewpoint changes or lack generalization to unseen environments. To this end, we propose DreamNav, a coarse-to-fine diffusion-refined aerial visual servoing framework. In the first coarse-estimation stage, a robust regression policy employs a trigonometric parameterization to predict rotation by jointly modeling sine and cosine components, effectively mitigating optimization instabilities caused by angular periodicity. Given this coarse estimate, the second diffusion-refined stage utilizes a pre-trained world model to simulate future visual observations for candidate actions, selecting the trajectory that minimizes visual discrepancy with the target through a process of visual imagination. To support rigorous evaluation, we contribute PairUAV, a large-scale benchmark comprising 4.8 million image pairs across 72 scenes, curated from the University-1652 dataset. Extensive experiments show DreamNav outperforms strong visual servoing and foundation model baselines in accuracy and generalization, with zero-shot transfer to unseen scenes.

Unmanned aerial vehicle (UAV) target segmentation remains challenging due to the small size of objects, appearance variations, cluttered backgrounds, and the scarcity of densely annotated data. These factors hinder the performance and practical deployment of lightweight segmentation models in real-world UAV applications. To address this problem, this paper investigates the use of SAM3 (Segment Anything Model 3) as a pseudo-label generator for training compact segmentation networks. Specifically, two supervision paradigms are explored: (i) direct pseudo-supervision using unaltered SAM3-generated masks, and (ii) a refinement strategy that re-applies SAM3 to localized image patches for improved mask quality. Based on these paradigms, a two-stage SAM3-guided pseudo-label generation framework is proposed. In the first stage, SAM3 generates coarse masks for initial object localization. The localized regions are subsequently cropped into patches and processed by SAM3 again to generate fine masks with accurate object boundaries and discard false positives. The resulting coarse and fine masks are then used as pseudo-labels to optimize a lightweight network, termed IPS-Seg, which consists of three components: an IdentityFormer backbone for feature extraction, an Atrous Spatial Pyramid Pooling module for multi-scale context aggregation, and a PixelShuffle-based decoder for spatial resolution recovery. Extensive experiments under multiple supervision settings demonstrate the effectiveness of the proposed framework. The results show that IPS-Seg achieves a favorable trade-off between segmentation accuracy and computational efficiency while benefiting consistently from the proposed pseudo-label generation strategy. These findings highlight the potential of large-scale foundation models as annotation sources for training compact task-specific segmentation networks in low-label vision domains.

Automation in construction is essential for reducing costs and human errors in large-scale projects. We approach the construction progress monitoring from the aspect of detecting changes in construction sites. As construction buildings continue to evolve in geometry and appearance over time, change detection need to be performed from arbitrary camera viewpoints. This necessitates developing 2D Change Detection (2DCD) algorithms that operate robustly across diverse camera perspectives at construction sites. While developing and evaluating such systems is data-intensive, no open-source benchmark dataset exists at the intersection of 2D change detection and construction automation research. Data collection using Unmanned Aerial Vehicles (UAVs) is gaining its popularity in outdoor large-scale surveying. However, in active construction sites conducting drone missions equipped with high-end sensors imposes safety concerns. Flight trajectory and collected camera viewpoints can be significantly limited. To address this critical gap, we introduce iVISION-2DCD, a large-scale synthetically generated dataset from dense LiDAR point clouds with photorealistic input images and accurate ground truth annotations. Our dataset formally defines the problem of viewpoint-robust 2DCD at construction sites and captures the inherent complexities of real-world deployment. In this paper, we present our systematic methodology for synthetic data generation, developing novel view synthesis techniques to overcome bi-temporal alignment and viewpoint diversity challenges, and implementing semi-automated semantic segmentation with change label generation while preserving challenging real-world cases. Benchmark evaluations using state-of-the-art 2DCD algorithms demonstrate that iVISION-2DCD poses novel research challenges for the computer vision and robotics communities.

Vision-language-action (VLA) models open a new path toward intuitive robot control by directly linking perception, language, and action in a single end-to-end framework. Yet for UAVs, practical adoption remains difficult because existing solutions are either computationally heavy or insufficiently capable in complex environments. In this work, we propose a practical expert-distillation pipeline (Exp2VLA) for language-conditioned drone navigation. The core idea is to distill expert behavior, obtained from reinforcement learning, teleoperation, or other controllers, into training data that can be used to fine-tune compact VLA models. This allows existing control strategies to be transferred into a unified language-guided navigation model, reducing manual system integration and lowering the barrier for deploying new robot behaviors. Experiments in both sim-to-sim and simulation-in-the-loop settings across multi-object scenes show that the fine-tuned models can handle varied semantic commands and generalize to unseen target compositions. The proposed framework demonstrates how expert-policy distillation can help mechatronic systems move from specialized control modules toward more flexible and reusable robot intelligence.

Autonomous drones are rapidly transforming modern warfare and civil applications alike. This paper presents the development of an integrated intelligent drone system designed to serve as a personal assistant. Leveraging the DJI Tello drone platform, we implemented a modular architecture that integrates three core artificial intelligence functionalities: facial detection, facial recognition, and depth estimation from monocular vision. A web-based interface enables seamless drone control and real-time video monitoring, while a Python-based server processes visual data and executes inference pipelines using lightweight neural models optimized for embedded systems. Unlike existing commercial solutions, this system emphasizes accessibility, low-cost hardware, and open-source technologies. The system demonstrates robust performance in real-world conditions, including person tracking, indoor scanning, and autonomous line following using virtual sensors. This project validates the applicability of advanced AI techniques in real-time robotic systems and illustrates the feasibility of deploying them on constrained hardware, providing a foundation for future research in autonomous UAVs for military, rescue, and surveillance missions.

Many path planning algorithms have been introduced so far, but most are costly, in path cost and in processing time, in large-scale uncluttered 3D environments such as underground mining stopes explored by an unmanned aerial vehicle (UAV). Rapidly-exploring Random Tree (RRT) algorithms are popular because of their probabilistic completeness and rapidity in finding a feasible path in single-query problems. Many of the algorithms (e.g. Informed RRT*, RRT#) developed to improve RRT need considerable time to converge in large environments. Shortcutting an RRT is an old idea that has been proven to outperform RRT variants. This paper introduces a new method, RRT-Rope, that aims at finding a near-optimal solution in a drastically shorter amount of time. The proposed approach benefits from fast computation of a feasible path with an altered version of RRT-connect, and post-processes it quickly with a deterministic shortcutting technique, taking advantage of intermediate nodes added to each branch of the tree. This paper presents simulations and statistics carried out to show the efficiency of RRT-Rope, which gives better results in terms of path cost and computation time than other popular RRT variations and shortening techniques in all our simulation environments, and is up to 70% faster than the next best algorithm in a representative stope.

In environmental monitoring as well as emergency response applications such as wildfires, wind velocity measurement is essential. Quadrotor UAVs have become popular platforms for wind velocity estimation due to their maneuverability, compact size, and cost-effectiveness. Numerous studies use the Extended Kalman Filter (EKF) to estimate the wind velocity based on the quadrotor dynamic model. However, most of them use hovering quadrotors only for wind estimation, others use a near-linear trajectory to estimate near-constant velocities. Furthermore, EKF performance is constrained by its reliance on linearized approximations of the nonlinear quadrotor dynamics around current states, limiting accuracy in highly nonlinear scenarios, including windy conditions. This study proposes the use of an Unscented Kalman Filter (UKF), a nonlinear estimator to provide accurate wind estimations while maintaining the trajectory of the quadrotor UAV. The quadrotor is modeled on the Special Euclidean group SE(3) and the approach is evaluated through numerical simulations using a geometric controller to maintain quadrotor flight paths. The results indicate that as the nonlinearity of the simulation increases, the UKF consistently outperforms the EKF. This demonstrates the potential of the UKF as a reliable estimator for highly nonlinear scenarios, capable of maintaining the trajectory with minimal deviation while providing accurate wind velocity estimations.

The problem of autonomous navigation for UAV inspection remains challenging as it requires effectively navigating in close proximity to obstacles, while accounting for dynamic risk factors such as weather conditions, communication reliability, and battery autonomy. This paper introduces the MOAR path planner which addresses the complexities of evolving risks during missions. It offers real-time trajectory adaptation while concurrently optimizing safety, time, and energy. The planner employs a risk-aware cost function that integrates pre-computed cost maps, the new concepts of damage and insertion costs, and an adaptive speed planning framework. With that, the optimal path is searched in a graph using a discrete representation of the state and action spaces. The method is evaluated through simulations and real-world flight tests. The results show the capability to generate real-time trajectories spanning a broad range of evaluation metrics: around 90% of the range occupied by popular algorithms. The proposed framework contributes by enabling UAVs to navigate more autonomously and reliably in critical missions.

This paper addresses the problem of monocular metric depth estimation in aerial UAV imagery. Although recent data-driven methods have achieved remarkable progress in ground-level scenarios, models trained primarily on street-view and indoor datasets exhibit significant domain gaps when applied to aerial viewpoints. To tackle these challenges, we introduce AerialMetric, a benchmark dataset designed to evaluate and facilitate the adaptation of monocular metric depth estimation under UAV aerial viewpoints. The dataset consists of four complementary subsets collected from different sources, jointly covering real-world photogrammetry data, controlled aerial acquisition settings, photorealistic synthetic scenes, and in-the-wild Internet imagery. Totally, AerialMetric provides 52K real-world and 16K synthetic image-depth pairs with reliable metric ground truth. Based on this dataset, we conduct systematic evaluations of existing state-of-the-art models under aerial settings and investigate the impact of viewpoint, altitude, and camera parameters on metric depth prediction. In addition, by fine-tuning representative metric depth model on our dataset, we establish a comprehensive aerial benchmark and achieve state-of-the-art performance across diverse aerial imagery. Our dataset, code, and model weight are publicly available at https://kuieless.github.io/AerialMetric-ECCV2026-page/.

Passive acoustic sensing is an attractive modality for counter-unmanned aerial system (counter-UAS) defence: it is covert, low-cost, and effective against drones with small radar cross-sections or minimal radio emissions. We present EchoHawk, an open and fully reproducible reference pipeline that detects a drone from its rotor harmonics, estimates its blade-passing frequency, and localises it with a microphone array via classical wideband beamforming (delay-and-sum, MVDR, MUSIC) and time-delay processing (GCC-PHAT, SRP-PHAT), followed by temporal tracking. We evaluate the system on a physically transparent synthetic benchmark that pits drones against hard low-frequency harmonic confusers, such as ground vehicles, and on real recorded audio. Our central methodological contribution is a documented case of session-level data leakage in a widely used public dataset: because its recordings are pre-segmented into short clips, naive clip-level splits place adjacent slices of the same continuous recording in both training and test sets, inflating reported performance. Enforcing recording-session-grouped cross-validation reduces, for example, a random-forest baseline's detection probability at a 1% false-alarm rate from 0.796 to 0.745, yielding honest numbers. All code, figures, and a synthetic data generator are released so that every result runs without any download.

Accurate localization of unmanned aerial vehicles (UAVs) is essential for applications such as structural health monitoring, especially in environments where Global Positioning System (GPS) signals are denied or unreliable, like indoor spaces, tunnels, urban canyons, or areas beneath large structures. To address this challenge, we propose Cross-Fusion, a novel method for real-time UAV localization that integrates data from a 3D Light Detection and Ranging (LiDAR) and a monocular camera. A key contribution is its cross-session fusion strategy, which integrates visual and geometric information collected from multiple agents during routine baseline surveys to improve localization consistency and map completeness. The system employs LiDAR-based odometry for motion tracking and image-based feature matching via a single red-green-blue (RGB) camera to correct drift and improve accuracy. Unlike visual-inertial systems, Cross-Fusion maintains a simple sensor setup and avoids the complexity of stereo or global shutter configurations. Experimental results demonstrate that Cross-Fusion achieves localization accuracy comparable to GPS-based methods and performs reliably in challenging feature-sparse environments.

End-to-end unmanned aerial vehicle (UAV) navigation can achieve impressive agility in simulation, yet its obstacle-avoidance behavior often degrades after deployment because the policy must tolerate simulator mismatch, sensing irregularity, and variable-rate control. These effects are especially dangerous in cluttered environments, where stale observations or short control irregularities can directly lead to collisions. We present LNN-Fly, a deployment-oriented continuous-time navigation policy for LiDAR-based UAV obstacle avoidance. The policy combines a dynamic-programming-inspired structured recurrent update, explicit conditioning on the elapsed control interval Δt, and an input-driven adaptive forgetting gate that refreshes stale latent state near hazards while preserving consistency during sustained maneuvers. It is trained with differentiable rollouts that incorporate deployment-relevant sensing and timing perturbations. In simulation, LNN-Fly improves obstacle-avoidance performance in the tested settings and shows better tolerance to reduced control frequency, sparse observations, and control-period jitter. It also transfers zero-shot from a simplified differentiable simulator to a physical quadrotor. In indoor cross-frequency real-world tests, the system achieves 100% success over 20 flights, while policy inference has a median latency of 0.514 ms on a desktop graphics processing unit (GPU) and about 2.5 ms on the onboard central processing unit (CPU), with onboard P95 latency below 30 ms.

Spatial intelligence is essential for low-altitude unmanned aerial vehicle (UAV) perception, collaboration, and navigation. However, existing UAV benchmarks often emphasize image-level recognition, single-view understanding, or narrow answer formats, leaving 3D spatial inference, multi-view collaboration, scene dynamics, and diverse task formulations insufficiently evaluated. To address these gaps, we introduce SpatialUAV, a real low-altitude UAV benchmark comprising 4,331 curated instances across 14 fine-grained task types, covering semantic discrimination, spatial relation, aerial--aerial collaboration, aerial--ground collaboration, and motion understanding. SpatialUAV organizes all samples into a unified visual-input--question--answer schema, while supporting seven input configurations and nine answer formats, including option labels, region identifiers, geometric values, cross-view correspondences, and free-form motion descriptions. To ensure reliable and grounded evaluation, our data construction pipeline integrates detector-assisted regions, depth supervision, metadata-derived rules, extensive manual annotation, blind filtering, and multi-turn human validation, together with task-specific metrics for heterogeneous outputs. Evaluating representative vision-language models across three categories, we show that current models remain far from human-level performance, with pronounced bottlenecks in cross-view association, structured grounding, geometric reasoning, and temporal viewpoint understanding. These results offer empirical guidance for advancing low-altitude UAV spatial intelligence. Code and data are available at https://github.com/Hyu-Zhang/SpatialUAV.

Large-scale point cloud maps are essential for robotics and spatial intelligence tasks. UAVs provide an efficient means for large-scale map acquisition; however, due to limited flight endurance and onboard storage, mapping a large-scale scene within a single flight remains difficult. Existing multi-session map merging methods can extend the mapping range, yet in UAV scenarios they still struggle to simultaneously suppress long-range drift and preserve local geometric accuracy. To address this issue, an uncertainty-aware multi-session point cloud map merging and coarse-to-fine optimization system is proposed. The proposed method first performs initial multi-session map merging based on a scene graph, and then incorporates RTK observations through an RTK spatiotemporal alignment module, where temporal offsets are estimated using Dynamic Time Warping (DTW), and continuous RTK constraints are recovered using Multi-Output Gaussian Processes (MOGP) under incomplete sampling and frame dropouts. On this basis, a unified uncertainty-aware factor graph is constructed, and local geometric accuracy is further improved through iterative plane-factor refinement. Experiments on real-world datasets validate the effectiveness and robustness of the proposed method. To facilitate further research and development in the community, our code and dataset will be publicly released.

Unmanned aerial vehicles (UAVs) are increasingly employed in urban inspection tasks, where reliable communication is critical but challenging due to the severe spatial channel heterogeneity. To address the issue, in this paper, we focus on the communication-aware path planning for multi-UAV tasks, and propose a channel knowledge map (CKM)-driven trajectory planning framework which integrates the channel modeling and trajectory decision-making. Specifically, we apply the diffusion model to construct a time-accumulated CKM and achieve the accurate perception with low flight overhead, which leverages the sparse observation data to reconstruct the high-fidelity global channel quality distribution. Based on the CKM, we propose a global-to-local graph attention network soft actor-critic algorithm. The graph attention network optimizes the complex combinatorial node ordering problem, generating an optimal and communication-aware sequence for the inspection targets. Subsequently, the soft actor-critic algorithm performs continuous action control to ensure the smoothness of the flight path and dynamically avoid communication attenuation areas. Simulation results demonstrate that the proposed method effectively guides UAVs through high-quality channel regions without dependence on real-time channel feedback, significantly improving both the trajectory efficiency and communication reliability.

The deployment of unmanned aerial vehicles (UAV) as open radio units (O-RUs) in 6G cellular systems presents a promising opportunity to achieve scalable and adaptive network coverage. However, optimizing UAV trajectories in dynamic and unfamiliar environments remains a critical challenge, particularly due to the need for extensive retraining in each new scenario. In this paper, we introduce a novel UAV trajectory optimization framework that integrates enhanced continual transfer learning within the O-RAN architecture. The proposed system maintains a library of pre-trained models and employs a model selection mechanism to identify and transfer knowledge from the most relevant environments, minimizing adaptation time and improving efficiency. When no sufficiently similar model is available, a fallback model empowered by continuous refinements ensures baseline performance. The framework leverages real-world city maps and ray tracing techniques to enhance learning reliability and improve trajectory planning. Simulation results demonstrate that the proposed model selection-based transfer learning approach reduces convergence time by 44% to 56% compared to retraining from scratch, and up to 40% compared to traditional transfer learning without model selection.

Autonomous exploration in unknown environments requires unmanned aerial vehicles (UAVs) to efficiently generate informative trajectories while simultaneously constructing accurate maps. Although many existing exploration methods rely on geometric information, they often lack semantic awareness, resulting in suboptimal exploration efficiency and limited environmental understanding. To address this limitation, this paper proposes a semantic-aware exploration framework that adds semantic information to a roadmap-based exploration strategy. The proposed method builds on the Dynamic Exploration Planner (DEP), which incrementally constructs a Probabilistic Roadmap (PRM), and augments this roadmap with a semantic layer. A semantic reward function is introduced to prioritize regions containing meaningful objects and structures, enabling the UAV to focus on areas with higher information value. Furthermore, the roadmap is continuously updated to support efficient frontier selection and path planning during exploration. The proposed framework is implemented in ROS Noetic and Gazebo using an RGB-D sensor for simultaneous acquisition of geometric and semantic information. Experimental results in multiple simulated environments demonstrate that the proposed approach achieves exploration coverage rates between 90% and 94% while reducing exploration time and travel distance compared with conventional geometry-based exploration methods.

UAV Vision-Language Navigation (UAV-VLN) is typically formulated as a holistic search-and-reach problem, where long-range target discovery and final target approach are optimized and evaluated jointly. This formulation makes it difficult to assess a critical capability of aerial embodied agents, namely whether a UAV can accurately ground a visible target and translate vision-language evidence into precise 3D motion once the target enters its field of view. To address this limitation, we introduce UAV-VLN-FOV, a target-visible navigation task that isolates the see-and-reach stage and enables a more diagnostic evaluation of terminal reaching ability. We further propose 3DG-VLN, a vision-language waypoint prediction framework guided by dynamic 3D direction cues to enhance fine-grained visual grounding and spatial direction alignment for precise target reaching. Specifically, 3DG-VLN adaptively processes high-resolution front-view and downward-view observations to preserve fine-grained visual and geometric details for target grounding. It also updates the target-relative direction online during closed-loop navigation, allowing the agent to maintain spatial alignment with the target and reduce accumulated direction drift. To support this task, we construct a dedicated high-resolution benchmark which contains 2,717 trajectories with target-oriented high-level instructions, high-resolution front-view and downward-view egocentric observations, and continuous 3D waypoint annotations. Experiments show that 3DG-VLN outperforms competitive UAV-VLN baselines, achieving a 13.82% improvement in success rate. Real-world trials further demonstrate the potential of 3DG-VLN for practical see-and-reach navigation. The source code and benchmark are available at https://github.com/xuefanfu/3DG-VLN.

A precise state estimate is crucial for a tight feedback control that enables agile and near-obstacle flights of UAVs. The state-of-the-art methods fuse slow pose measurements with high-frequency inertial measurements to obtain a precise state estimate. However, the inertial measurements from the IMU onboard the UAV are degraded by vibrations from spinning propellers and the precision of the estimated state suffers. We propose a novel approach based on the preintegration of accelerations obtained from motor speeds. We show that the accelerations obtained in this manner can be used for state propagation on their own to achieve better precision without including the IMU. Further, we propose a factor composed of the preintegrated motor speeds that can be directly employed in factor graph optimization frameworks. We combine our factor with LiDAR measurements into the proposed Motor Angular Speed LiDAR Odometry (MAS-LO) algorithm for precise state estimation, which we open-source. Lastly, we evaluate the estimation precision against a state-of-the-art inertial algorithm LIO-SAM to show 28% improvement in position and 65% in velocity estimation accuracy, 14% lower measurement lag, and high robustness to wrong parameter values.

Safe and efficient trajectory planning in unknown, cluttered 3D environments constitutes a critical bottleneck for deploying Unmanned Aerial Vehicles (UAVs) in real-world applications. This challenge is further exacerbated by the limited field-of-view (FOV) and sensing range of onboard sensors. Many existing methods either make simplistic assumptions about unexplored space or rely on conservative heuristics such as speed limits or fixed perception patterns, reducing efficiency and generalizing poorly across different sensor types. In this work, we propose a novel planning framework that directly integrates active perception into trajectory optimization, thereby improving safety while preserving efficiency. The perception constraints are derived from the UAV's dynamic model and formulated in the sensor coordinate frame, which enables precise handling of FOV geometry. The velocity-triggered activation mechanism enables the planner to balance perception and motion efficiency. We introduce an active perception sub-trajectory segment with parametric start-time optimization, mitigating collision risks from late obstacle detection. Our formulation enables active perception during arbitrary 3D maneuvers, extending beyond prior methods designed mainly for horizontal motion. All constraints and penalties are incorporated into a differentiable optimization problem, so the planner requires only a simple front-end global path for guidance, rather than a computationally expensive perception-aware path generator. Extensive simulations and real-world experiments demonstrate robust performance across diverse unknown environments with varying sensor configurations.

The integration of generative artificial intelligence with wireless communication and signal processing systems has opened new avenues for intelligent, data-driven decision-making in future 6G networks. This work proposes a diffusion soft actor-critic (Diffusion-SAC) approach that leverages offline reinforcement learning (RL) enhanced by denoising diffusion probabilistic models (DDPMs) to optimize trajectory and scheduling control in unmanned aerial vehicle (UAV) networks. While offline RL methods, such as conservative Q-learning (CQL), can learn from static datasets, they often struggle to generalize in low-data or dynamic conditions. To address this, we combine the robustness of CQL with the generative power of diffusion models, enabling expressive and signal-aware policy learning that generalizes beyond behavior policies. Applied to a UAV-assisted wireless network, the proposed framework minimizes transmission energy and improves fairness among devices. Simulations show that Diffusion-SAC outperforms standard offline RL baselines, achieving more stable convergence and higher rewards even with limited datasets. The method enhances data efficiency, reduces energy consumption, and increases throughput by more than 35 % compared to existing algorithms, demonstrating its potential for robust policy learning in next-generation wireless control systems.

Agentic AI can support unmanned aerial vehicle (UAV) autonomy by providing high-level recovery reasoning when local waypoint- or setpoint-based execution encounters blocked passages, repeated no-progress behavior, or mission-level ambiguity. On physical UAVs, however, remote reasoning is most useful when it is invoked selectively, since each call introduces latency, resource cost, backend uncertainty, and a need to validate the returned decision. This paper presents Persistent Mission Runtime (PMR), a UAV recovery framework that keeps the mission loop and safety-critical execution local while using an external agentic reasoner only as an on-demand recovery module. The reasoner selects from predefined recovery skills, and each returned decision is parsed, verified, safety-filtered, and mapped to local executor actions before it can affect flight. PMR introduces learned Cognitive Value of Invocation (learned-CVI), a compact admission gate that estimates when remote agentic reasoning is likely to improve near-term mission progress enough to justify its operational cost. Across a fixed 400-run Gazebo/PX4 benchmark with eight scenarios, learned-CVI raises hard/ambiguous-regime success from 5.0% under local-only autonomy to 95.0%, outperforms one-shot and periodic reasoning baselines by 20.0 and 32.5 percentage points, and reduces remote-agent calls by 16.7% and logged tokens by 29.2% relative to a manually tuned rule-based invocation baseline.

Unmanned aerial vehicles (UAVs) are increasingly used in inspection, search and rescue, environmental monitoring, and emergency response. However, most UAV applications still rely on pre-defined command sequences or task-specific pipelines, where developers manually connect perception, planning, flight control, simulation, logging, and safety modules. This limits the flexibility, reproducibility, and extensibility of autonomous aerial systems. This paper presents AerialClaw, an open-source software framework that enables UAVs to operate as decision-making aerial agents rather than merely command-following platforms. Given a natural-language mission, AerialClaw allows an LLM-based agent to understand the task, maintain context, invoke executable aerial skills, observe perception and runtime feedback, and iteratively update its decisions in a closed loop. The framework adopts a modular brain-skill-runtime architecture, combining hard skills for atomic UAV operations, Markdown-based soft skills for reusable task strategies, document-driven agent state and capability boundaries, memory-driven reflection, safety-oriented runtime validation, and platform-agnostic execution adapters. AerialClaw supports lightweight mock execution, PX4 SITL with Gazebo, and AirSim-based simulation, together with a web console, pluggable model backends, example missions, simulation assets, and staged deployment scripts. By combining standardized aerial skills, document-driven agent state, memory, and closed-loop LLM decision-making, AerialClaw provides a reproducible and extensible open-source framework for building UAV systems that can interpret missions, make decisions, execute skills, and adapt their behavior from feedback.

Unauthorized unmanned aerial vehicle (UAV) activity around airports, public venues, and other sensitive sites has made protected-airspace monitoring increasingly important. A practical sensing system must search a wide angular region, find small long-range targets, and return both bearing support and UAV-specific evidence before a restricted perimeter is breached. Existing UAV detection paths often rely on spatially organized evidence, such as body extent, silhouette, or track continuity. At long range, however, these cues become difficult to preserve and verify as the target footprint weakens and its image-plane support shrinks. EventRadar follows a complementary cue: propeller-induced temporal periodicity, which recent event-camera sensing studies have shown can reveal UAV-specific motion after appearance becomes weak. We extend this cue to kilometer-scale active sensing with an event-camera prototype. Scene-Anchored Geometry Evidence (SAGE) fuses scanning events with IMU pose to maintain a bearing-indexed scene memory, separating transient candidate support from persistent background clutter. Comb-guided Harmonic-Group Learned Iterative Shrinkage and Thresholding Algorithm (CHG) then treats each candidate as a weak high-rate timing signal and recovers phase-insensitive harmonic evidence with fixed compute. Compared with related event-camera baselines on 700-1500 m UAV event recordings, EventRadar achieves 0.990 mAP$_{.3}$ and 0.949 F1$_{.3}$, reduces FN$_{.3}$ to 0.009, and shows real-time feasibility in prototype profiling.

Aerial Embodied Question Answering (EQA) requires Unmanned Aerial Vehicles (UAVs) to actively perceive the environment and answer natural language questions. Existing outdoor EQA systems usually stop once the target enters the UAV's field of view, leaving the fine-grained viewpoint adjustment needed for evidence-seeking questions largely unresolved. To address this issue, we introduce FG-EQA, a fine-grained active perception EQA benchmark with more than 40K simulated trajectories and 1K real-world trajectories. Drawing inspiration from the ``waggle dance'' of scout bees, which iteratively adjust their flight paths to verify target information, we propose ScoutVLA, an evidence-driven Vision-Language-Action model for outdoor EQA. To emulate this active exploration behavior, ScoutVLA features a decoupled dual-expert architecture: a vision-language expert infers the semantic intent to identify missing evidence, while an independent action expert employs high-DoF flow matching to generate continuous viewpoint-refinement trajectories. To balance the competing demands of continuous control and semantic reasoning, we devise a decoupled training strategy with a knowledge insulation mechanism that prevents the action gradients from erasing the model's multimodal reasoning ability. Extensive simulated experiments and a qualitative real-world field study both verify the superiority of ScoutVLA over the state-of-the-art baselines, demonstrating a 10.48$\boldsymbol{\times}$ higher average strict success rate and a 7.72$\boldsymbol{\times}$ higher average QA correctness.

UAV multispectral imagery naturally contains multi-angular observations due to low flight altitude and wide field-of-view imaging, which may introduce geometry-driven radiometric variability. This study proposes a geometry-aware multi-angular observation extraction workflow to quantify observation-geometry effects from a BRDF perspective. Specifically, camera intrinsics and extrinsics are refined via structure-from-motion (SFM), and homogeneous regions annotated on an orthomosaic are reprojected onto multiple raw sub-images acquired from different viewpoints. This enables joint extraction of multi-band reflectance and observation geometry parameters for the same ground targets under varying viewing directions. The extracted observations are further analyzed using band-wise polar visualization in the (VZA, RAA) domain. Results on a grassland target show clear reflectance anisotropy across ten bands, with red-edge and nearinfrared bands exhibiting 119-137% variability between maximum and minimum reflectance, indicating non-negligible observation-geometry effects on radiometric consistency.

Estimating the relative poses of multi-camera systems is a fundamental problem in computer vision, with critical applications in autonomous vehicles, mobile devices, and unmanned aerial vehicles (UAVs). However, existing solutions often suffer from high computational complexity or rely on an excessive number of point correspondences, limiting their real-world applicability. To address these limitations, we propose two efficient minimal solvers for estimating the relative poses of multi-camera systems using a novel parameterization. The first solver leverages the vertical direction prior provided by Inertial Measurement Units (IMUs), while the second utilizes the rotation axis direction prior from IMUs. Our methods require only four point correspondences and reduce the problem of multi-camera relative pose estimation to solving a univariate 6th-degree polynomial, a significant improvement over existing approaches, which typically involve 8th-degree polynomials. This reduction in computational complexity and correspondence requirements makes our solvers particularly effective when integrated into RANSAC frameworks, demonstrating strong potential for visual odometry applications. Through rigorous evaluations on synthetic data and the KITTI benchmark, our methods achieved superior computational efficiency and competitive accuracy compared to state-of-the-art algorithms.

Bearing-only target localization is a fundamental problem in optical measurement and finds extensive applications in unmanned aerial vehicle (UAV) technology. Effective trajectory planning establishes favorable observation geometries, thereby enhancing the target localization accuracy of bearing-only UAV systems. This paper proposes an trajectory optimization method for unmanned aerial vehicles (UAVs) in bearing-only target localization scenarios. By leveraging the Fisher Information Matrix (FIM), the proposed approach dynamically integrates the geometric configuration and vehicle maneuverability into the optimization framework. Specifically, we introduce a spectrally-weighted FIM objective function that provides better gradient dynamics near degenerate configurations, enabling the planner to rapidly escape from poor observation conditions. For dual-UAV scenarios, an intersection angle sine term is introduced to optimize triangulation geometry by improving the sight-line intersection angle, thereby preventing trajectory aggregation. Furthermore, we propose an improved Particle Swarm Optimization (PSO) algorithm with motion model constraints and particle normalization to ensure the physical feasibility of the trajectory and enhance the compatibility with the objective functions. Simulation results demonstrate that the proposed method reduces the median localization error by 99.21% compared to conventional FIM-based approaches in single-UAV scenarios, and achieves a 69.70% improvement for dual-UAV configurations, exhibits superior performance in long-duration bearing-only target localization of maneuverability targets at extended ranges.

Video semantic segmentation for low-altitude UAVs requires temporal consistency, yet dense optical flow introduces spatially structured noise in the planar regions that dominate aerial imagery. We propose a zero-parameter geometric gate that uses RANSAC homography inlier ratios on a $16\times16$ spatial grid to route each region to either homography or optical flow warp before fusion via Semantic Similarity Propagation. The gate requires no learned parameters -- only a median-threshold binary decision on RANSAC statistics -- adding only 211K trainable parameters (the SSP fusion layer) to a frozen backbone. On synthetic UAVid, the method achieves +4.24--4.91% mIoU improvement over base models across two architectures (SegFormer-b2 and Hiera-S+UPerNet). Mechanism diagnostics reveal that flow residuals in planar regions are spatially autocorrelated (Moran's I = 0.32, $p < 0.001$), predict boundary instability (Spearman $ρ= 0.66$), and that rigidification recovers temporal consistency from 62% to 92% (+29.5pp) in homography-valid regions.

Multimodal 3D object detection based on LiDAR and cameras has demonstrated excellent performance in ground-vehicle scenarios, but has not been explored for Unmanned Aerial Vehicle (UAV) platforms. In UAV top-down scenes, frequent groundobject occlusion dominated by tree canopies causes spatially varying and modality-dependent information degradation. Existing multimodal fusion frameworks neither explicitly model such ground-object occlusion nor embed occlusion awareness into the detection pipeline, limiting their performance in occluded UAV scenes. To address these challenges, we propose CAMF-Det, a closure-aware multimodal fusion framework for LiDAR-camera 3D object detection on UAV platforms, which derives dual-modal occlusion intensity through physics-inspired modeling and embeds them as priors throughout the detection pipeline. First, a dual-modal closure modeling module explicitly constructs occlusion intensity ground truth for both modalities offline via a Beer-Lambert-inspired formulation and building-mask correction. Second, using these ground-truth maps as supervision, a dual-modal prediction network converts the offline modeling results into online occlusion intensity predictions under single-frame inference. Third, both ground-truth and predicted occlusion intensity are injected into data augmentation, feature encoding, multimodal fusion, and detection head, enabling adaptive detection under spatially varying and modality-dependent information degradation. Experiments on two self-built UAV-based multimodal datasets, SI3D-DI and SI3D-DII, demonstrate that CAMF-Det achieves the best performance across all difficulty levels, with hard-level mAP$_{\mathrm{BEV}}$ improvements of 9.43% and 4.88% over the best competing methods, respectively. These results confirm the effectiveness of explicit occlusion prior modeling and exploitation for robust multimodal 3D detection in UAV scenes.

Unmanned Aerial Vehicle (UAV) multispectral point clouds (MPC) provide high-dimensional spatial-spectral data for sub-canopy target detection; however, their efficacy is significantly compromised by severe illumination heterogeneity caused by vegetation shadows. To address this, we propose a prior-free anomaly detection framework capable of robustly handling lighting variations. First, we formulate solar angle estimation as an inverse optimization problem. By coupling spectral indices with a ray-tracing model, this strategy achieves Prior-Free Shadow Extraction without relying on flight metadata, effectively distinguishing dark objects from true shadows. Second, to mitigate spectral distortions, we introduce an Illumination-Consistent Sparse Representation mechanism. Unlike standard reconstruction methods, we construct a background dictionary strictly from neighbors sharing the same illumination state. This constraint effectively disentangles spectral reflectance from lighting variations, ensuring that targets are represented solely by physically consistent background points. Experimental results indicate that the proposed method significantly improves the separability between anomalies and background in complex forest environments, demonstrating superior performance over state-of-the-art baselines. This framework is particularly suited for identifying camouflaged military targets, mapping fallen tree trunks, and uncovering archaeological ruins hidden beneath dense foliage.

Autonomous UAV swarms require scalable coordination mechanisms that maintain mission performance under limited communication, environmental uncertainty, and component failures. Centralized approaches provide global coordination but suffer from communication bottlenecks and single-node vulnerabilities, whereas fully decentralized methods often lack mission-level consistency. This paper presents Layered Autonomous Edge Intelligence (LAEI), a UAV-swarm framework that combines onboard learned policies with lightweight mission-level supervision. Each UAV performs local perception, obstacle avoidance, and action selection onboard, while the supervisory layer provides adaptive goal reassignment, fault-aware recovery, and context-dependent policy guidance without directly controlling low-level actions. LAEI further incorporates recovery strategies, including dynamic reassociation, backup supervisory support, and fallback local autonomy, to maintain mission continuity under representative failure scenarios. We evaluate LAEI in simulated UAV-swarm scenarios using mission completion time, collision rate, and coverage efficiency. The results show that LAEI reduces mission completion time and improves operational efficiency while maintaining collision-aware distributed UAV-level decision-making.

Unmanned aerial vehicle (UAV) object detection requires compact detectors that retain small-object details under onboard computation and memory constraints. Repeated downsampling inlightweight networks weakens shallow spatial information, while manually adding attention orfusion modules may increase cost without stable gains. This study analyzes YOLOX-Nano underedge-deployment constraints by combining a P2 high-resolution detection branch with a quantum-inspired evolutionary algorithm (QIEA) for lightweight structure screening. The search space isdefined by lightweight priority and task specificity, and the evaluation jointly considers accuracy,floating-point operations (FLOPs), latency, memory consumption, and recall. On VisDrone, theP2 branch increases APamall by 31.10% over the YOLOX-Nano baseline. Compared with NanoDet-Plus with similar model size, YOLOX-Nano+-P2 improves APs0.ss by 17.5% and APamal by 44.9%.The QIEA-selected candidate obtains the highest Recallso, but +P2 remains the strongest AP-oriented variant after full training. Full 100-epoch verification of Random-best, GA-best, andSA/QUBO-best candidates further shows that proxy rankings do not necessarily transfer to finalAPse9s. These results support using P2 as the main small-object enhancement path and QIEA as alightweight tool for candidate screening and accuracy-cost analysis. The source code, configurationfiles, diagnostic scripts, and summarized results are available at https://github.com/Ming23233/UAV-QIEA-Edge-Detection

In this study, UAV multispectral imagery is used to segment the severity of bacterial leaf blight (BLB) in rice using convolutional neural networks (CNNs) and transformer-based models. The evaluated architectures include U-Net with a ResNet- 101 encoder, U-Net++ with EfficientNet-B3 and EfficientNetB7, DeepLabV3+, and SegFormer, all trained under a common pipeline with three input configurations (multispectral only, multispectral+NDVI, and multispectral+NDRE). Experiments are conducted using the publicly available BLB dataset with performance reported using mean IoU (mIoU), mean F1 (mF1), mean accuracy (mAcc), precision, and recall. U-Net++ with EfficientNet-B3 achieved the highest performance, with an mIoU of 97.62%. SegFormer obtained lower segmentation accuracy but comparable inference speed. Overall, the results indicate that lightweight CNN backbones remain more reliable for operational BLB monitoring while integration of vegetation indices provides small and consistent improvements. The study also highlights the value of standardised UAV datasets to compare disease mapping methods and encourages the use of CNN architectures for field implementation.

Decentralized rigid formation flocking requires a swarm of autonomous agents to maintain a predetermined geometric configuration while moving, relying solely on local sensing and communication. However, existing decentralized control methods struggle to maintain strict inter-agent distance constraints in cluttered environments, often suffering from local minima deadlocks, high frequency control oscillations, or limited flexibility during obstacle navigation, resulting in low success rate. To address these limitations, we propose Rigid Swarm Control (RSC), a decentralized control framework for large-scale rigid formation flocking. To escape local minima via robust long-term planning while ensuring short-term safety, RSC integrates finite-horizon trajectory predictions with a reactive artificial potential field (APF) safety controller within a hybrid architecture. Furthermore, to accelerate formation reassembly after obstacle traversal without interrupting task execution, RSC introduces an online leader-follower reconfiguration mechanism based on stable role exchange. Extensive evaluations in challenging cluttered environments with 25 UAVs demonstrate that RSC reliably unifies rigid formation maintenance, obstacle avoidance, and target tracking. Under strict success criteria - collision-free operation with a maximum relative edge-length error below 10%, RSC achieves an 83% success rate, significantly outperforming existing heuristic and learning-based baselines that fall below 5%.

Deep reinforcement learning has shown strong potential for enabling autonomous robots to learn complex navigational tasks. However, its practical use still depends heavily on human designed reward functions and repeated manual fine tuning, which is time consuming and does not guarantee high success in the desired task. This paper presents AgenticRL, agent guided reinforcement learning framework that increases autonomy in reward design, policy refinement, and real world deployment for unmanned aerial vehicles (UAV) navigation tasks. AgenticRL uses a multimodal generative pre-trained transformer (GPT) agent to interpret task information and visual scene observations, generate task specific reward functions, train policies using Proximal Policy Optimization (PPO) algorithm, and then act as a critic by evaluating the trained policy through diagnosis packets to generate feedback. Based on this feedback, the agent identifies failure modes and refines the reward function in a closed loop self improvement process. To further leverage the multimodal GPT agent during inference, AgenticRL uses real world images and natural language task information to automatically identify the active scenario and select the appropriate trained policy for execution. The framework is evaluated on multiple navigational tasks, including gate traversal, obstacle avoidance, wall barrier crossing with landing, trajectory following, and motion behavior learning. Experimental results show that the closed loop refinement process improves policy behavior compared with initial rewards by 71%. We also demonstrate sim-to-real transfer of the proposed framework, achieving a real world success rate of 91% and a sim-to-real accuracy of 94%.

Detecting coordination among unmanned aerial vehicle (UAV) fleets operating in shared airspace and identifying the route-lead aircraft whose navigation decisions govern fleet behavior presents a fundamental speed--accuracy trade-off: fast methods enable real-time traffic management but sacrifice detection fidelity, while accurate methods may exceed the time budget for actionable airspace deconfliction. This paper presents a game-theoretic decision framework that resolves this trade-off by formulating method selection as a two-player zero-sum game between a Monitor (selecting computational methods and parameters) and Nature (selecting the unknown traffic scenario). We construct an end-to-end pipeline from trajectory surveillance data through eight candidate detection algorithms, a Monte Carlo sensitivity analysis characterizing their stochastic performance, and finally a multi-objective optimization layer that identifies Pareto-optimal method portfolios. The minimax solution provides a robust mixed strategy with a probability distribution over methods that guarantees worst-case performance regardless of scenario uncertainty. Experimental evaluation across 200 randomized configurations spanning 5--50 aircraft demonstrates that the framework recommends distinct method portfolios depending on operational priority: Koopman Phase dominates balanced (70.6%) and speed-priority (79.7%) profiles, while CRQA emerges as primary (47.4%) when route-lead identification is prioritized. The framework achieves a guaranteed game value of 0.29--0.53 (normalized utility) across all tested preference profiles, providing the first principled, scenario-adaptive methodology for computational method selection in UTM fleet monitoring operations.

Vision-Language-Action (VLA) models offer a promising end-to-end paradigm for unmanned aerial vehicles (UAVs) to accomplish complex tasks specified by fine-grained instructions. However, standard supervised fine-tuning (SFT) suffers from data scarcity, limited generalization, and weak supervision for nuanced and complicated human intents. Reinforcement fine-tuning offers a natural way to mitigate these challenges and align policy behaviors with human intents through designable feedback, but applying it to aerial navigation remains challenging due to inefficient exploration in expansive continuous spaces. To address these challenges, we introduce an efficient reinforcement learning (RL) framework for VLA-based aerial navigation. At its core, we propose EG-GRPO (Expert-Guided Group Relative Policy Optimization) to augment online rollouts with few-shot expert data. Additionally, we design a heterogeneous pipeline enabling parallel simulation and inference, which reduces rollout time by 43.5%. Across multiple tasks specified by complex human intents, EG-GRPO improves the success rate to 2.13x that of the SFT baseline, while improving intent alignment performance by 60.9%. These results demonstrate that our framework can move aerial navigation toward precise intent-aligned flight.

A fixed-wing UAV must hold airspeed, altitude, and heading references under wind, gusts, and turbulence, channels coupled so that correcting one can degrade another. Classical autopilots stabilize the airframe well but adapt poorly when a hard crosswind meets an aggressive turn, while reinforcement-learning (RL) policies acting directly on the surfaces concentrate exploration risk at the actuator interface. We place a learned supervisor above an unchanged autopilot rather than inside it: it selects a residual from a finite, bounded action set on the commanded airspeed, altitude, and heading; the modified reference is projected into an admissible command envelope before reaching the autopilot, which stays the only actuator-facing controller. What is new is how the residual is chosen. HJB residual scores candidates with a semi-discrete value-iteration critic in the spirit of the Hamilton-Jacobi-Bellman (HJB) equation, ranks them by a no-op-relative Hamiltonian advantage, and filters them through a control-Lyapunov- and control-barrier-inspired finite-action shield that always keeps a no-op fallback. On a shared 12-state runtime holding the plant, autopilot, and actuator model fixed, so the comparison is at the package level, HJB residual lowers mean RMS path-tracking error to 44.809 m, against 338.617 m for the baseline autopilot and 88.809 m for a tabular-Q residual, an 86.77% reduction over the baseline and 49.54% over Q-learning. The gain concentrates where the baseline fails worst and comes with a measured rise in airspeed error, so no method dominates every metric. We present this autopilot-preserving residual command-supervision design and benchmark with its trade-offs reported intact.

Unmanned Aerial Vehicles (UAVs) equipped with radar sensors are deployed for target search missions in diverse environments, where targets exhibit characteristic signatures (e.g., respiration micro-motion in human search) detectable through occlusions. A fundamental challenge arises from shifts in radar statistics as the UAV moves through a dynamic and potentially non-stationary environment, rendering any fixed signal-processing strategy suboptimal; yet perception and adaptation must run onboard a resource-constrained aerial node in real time. Since no single detector performs well across all conditions, we adopt a multi-policy paradigm and formulate UAV target search as an online policy selection problem over a library of specialized detectors, with performance measured by regret, the cumulative loss gap relative to the best policy in each scene. The setting couples in-scene stochastic noise with inter-scene shifts. Whereas prior methods capture only one regime, we account for both through the Stochastically Extended Adversary (SEA) framework, without requiring oracle knowledge of scene dynamics. Because adaptation must run at the UAV, we instantiate SEA through \textsc{SEArch}, a lightweight optimistic Follow the Regularized Leader (OFTRL) selector with an adaptive learning rate, achieving regret $O(\barσ_T \sqrt{T} + \sqrt{J})$, where $\barσ_T$ captures radar measurement noise and $J$ is the number of scene transitions over the mission horizon $T$. To enable rapid adaptation under frequent scene changes, we further introduce \textsc{W-SEArch}, a windowed variant that restarts every $w$ rounds and achieves regret $O(\barσ_I \sqrt{w})$ under at most one transition per window. Experiments show up to 30% regret reduction compared to non-adaptive baselines across a range of non-stationary settings.

For low-altitude Unmanned Aerial Vehicle (UAV) autonomy, 3D spatial understanding is not merely a perception objective, but the safety interface between human instructions and physical flight. In human-scale urban airspace below 20 meters, thin geometry, occlusions, vegetation, and urban clutter define whether an aerial agent can safely enter the space ahead. However, existing UAV datasets mainly provide 2D annotations or 3D boxes, while driving-oriented occupancy benchmarks assume stable ground-level sensor rigs. Both miss the defining regime of low-altitude flight: a front-facing monocular camera observing occupied and free space from a moving aerial body with frame-wise changing 6-DoF pose and camera extrinsics. To bridge this gap, we introduce SkyShield, to the best of our knowledge the first front-view monocular semantic occupancy benchmark for urban UAV flight below 20 meters. Built on CARLA, SkyShield contains 36K front-view UAV samples across diverse urban scenes and weather conditions, pairing each image with frame-wise 6-DoF UAV pose, frame-wise dynamic camera geometry, UAV states, and front-frustum semantic occupancy labels. We further propose KAR-mIoU, a UAV-centric and dynamics-aware metric that re-weights voxel-level evaluation by kinematic reachability and time-to-collision, revealing safety-critical risks hidden by conventional mIoU. To tackle this challenging new setting, we provide SkyOcc, a geometry-first monocular baseline that integrates frame-wise UAV attitude into projection, fuses temporal occupancy features, and applies safety-prior optimization to preserve sparse collision-critical structures. Together, SkyShield, KAR-mIoU, and SkyOcc establish occupancy as a safety interface for low-altitude aerial autonomy. Code and dataset will be released publicly.

Unmanned Aerial Vehicles (UAVs) have quickly become common in various airspaces, representing a wide range of applications from recreation flying to commercial photography and package delivery. With the increasing prevalence of UAVs, it becomes critical that both manned and unmanned aircraft can detect UAVs and other flying objects from long range to effectively track movement and ensure safe operation in shared spaces. While several datasets have been introduced for drone detection, the need for expanded high-quality data persists, especially in the area of high-resolution long-range drone data. To address this, we introduce a high-resolution dataset of 102,532 long-range RGB images of drones, sampled at 5 FPS from 128 distinct video clips taken mid flight during 17 different data collection days spread over 8 months to ensure a wide variety of lighting scenarios, flight locations, and background elements. The dataset boasts comprehensive drone range information across the dataset, as well as 29,630 IR images, all paired with RGB counterparts from the base dataset. As one of the first drone detection datasets to leverage 4K image resolution and paired 640x512 IR images, our work represents a significant advancement to enable the detection of drones at long range. For access to the complete dataset, please visit https://research.coe.drexel.edu/ece/imaple/lrddv3/

Federated learning (FL) is an effective paradigm for enhancing the learning capability of edge devices while preserving data privacy. In geographically dispersed FL systems, such as sensor networks in remote areas, unmanned aerial vehicles (UAVs) can flexibly establish high-quality communication links to support parameter exchange. However, device heterogeneity and the limited battery capacity of UAVs pose significant challenges. Specifically, data heterogeneity slows convergence, while scheduling all devices for global collaboration incurs excessive communication and energy costs. To overcome these challenges, we adopt a strict separation between a globally shared backbone and permanently local personalization heads, thereby mitigating the impact of data heterogeneity. Furthermore, we propose a gradient-based scheduling strategy that jointly considers energy efficiency and learning performance. In each communication round, the backbone is updated only by the top-$α$ devices ranked by gradient $\ell_{2}$-norm, ensuring that optimization focuses on the most informative updates. Simulation results demonstrate that the proposed scheme achieves higher learning accuracy than state-of-the-art approaches while significantly reducing UAV energy consumption.

As modern air combat evolves toward beyond-visual-range (BVR) multi-aircraft cooperative engagements, autonomous decision-making for unmanned combat aerial vehicles (UCAVs) faces significant challenges due to high-dimensional state spaces, discrete action commands, and strongly adversarial dynamic environments. To overcome the limitations of existing multi-agent reinforcement learning (MARL) methods in such settings, namely insufficient exploration efficiency, low sample utilization, and poor policy generalization, we propose Adversarial Curriculum and Evolutionary-enhanced Multi-agent Proximal Policy Optimization (ACE-MAPPO), a hybrid learning framework that integrates evolutionary algorithms with MAPPO. Specifically, a genetic soft update mechanism is introduced to enhance population diversity and mitigate convergence to local optima. An evolutionary-augmented prioritized trajectory replay strategy is further employed to improve the utilization of sparse high-value samples. In addition, an adversarial evolutionary curriculum learning mechanism is designed to enable adaptive training with progressively increasing difficulty. Extensive experimental results demonstrate that the proposed method outperforms MAPPO and other baseline algorithms in terms of training stability, convergence speed, and win rate, validating its effectiveness in multi-aircraft cooperative air combat scenarios.

Autonomous landing of Unmanned Aerial Vehicles on maritime vessels is challenging due to the coupled motion of the vehicle and landing platform in open-sea conditions. This paper presents a reinforcement-learning-based approach for autonomous multirotor landing on moving maritime platforms without requiring explicit platform-state observations or estimation during deployment. The proposed method uses multirotor state measurements together with local visual features, consisting of keypoints and associated descriptors extracted from the landing surface, to predict attitude and thrust commands. These commands are tracked by a conventional low-level controller. The policy is trained in simulation using synthetic keypoints with randomly generated normalized descriptors, enabling zero-shot deployment with different local feature extractors onboard the UAV. We evaluate the method in a realistic simulator and show that it outperforms a state-of-the-art Model Predictive Control baseline under platform motions corresponding to ''Very Rough'' sea conditions. Finally, we perform extensive real-world experiments, demonstrating autonomous onboard landing using two different local feature extractors. To the best of our knowledge, this is the first approach for agile multirotor landing on maritime platforms in turbulent waters that does not rely on an explicit platform-state during deployment.

Image-Based Visual Servoing (IBVS) provides an efficient vision-guided control paradigm for unmanned aerial vehicles (UAVs) by directly regulating image-space errors. However, conventional IBVS controllers are vulnerable to two critical issues: loss of closed-loop stability near the target due to input and state constraints, and control failure caused by intermittent loss of moment-based visual features under aggressive motion. To address these challenges, this paper proposes a terminal-constraint model predictive control (TC-MPC) framework for IBVS, integrated with a Kalman filter (KF)-based state-prediction mechanism. The TC-MPC explicitly incorporates terminal-state constraints and a terminal cost into the IBVS error dynamics, ensuring recursive feasibility, improved convergence behavior, and closed-loop stability under control and state constraints. In parallel, the Kalman filter predicts the temporal evolution of image moments during short-term visual degradation, enabling the controller to preserve control continuity when moment measurements are partially unavailable. The proposed approach is validated through real-time UAV visual servoing experiments.

The detection of non-cooperative unmanned aerial vehicles (UAVs) presents significant challenges for Integrated Sensing and Communication (ISAC) systems due to the inherent limitations of single-modal perception and the competition for shared communication and sensing resources. To address these challenges, this paper proposes a novel Camera-Cooperative ISAC (CC-ISAC) framework that employs multimodal sensing to enable efficient UAV beam steering and tracking. The proposed framework employs cameras for coarse-grained airspace monitoring and utilizes ISAC for fine-grained, high-precision sensing, forming a complementary perception loop that enhances both sensing accuracy and resource efficiency. Within this framework, two key modules are developed: (1) a Vision-to-Echo Data Alignment (V2EDA) model that aligns visual and echo-domain features through cross-attention mechanisms, and (2) a Multimodal Fusion-Based Estimation (MMFE) model that integrates historical multimodal data with current observations for robust state estimation. Extensive evaluations conducted on the DeepSense 6G dataset demonstrate that the proposed framework achieves an average reduction of 71% in beam steering overhead and 1.69-11.15% in tracking overhead while maintaining high angular estimation accuracy. The CC-ISAC framework effectively mitigates resource contention between sensing and communication, enabling reliable UAV surveillance while freeing substantial system resources for additional communication tasks, thereby representing a practical advancement in ISAC system design.

This paper presents a non-contact approach for vibration-based structural damage detection using an autonomous and customized cost-effective unmanned aerial vehicle (UAV). Vibration signals are extracted from video recordings through vision-based motion tracking to identify shifts in natural frequencies indicative of structural degradation. A laboratory-scale frame structure is evaluated under healthy and simulated-damage conditions. The proposed system is validated through an experimental study involving two smartphones, a USB camera, and a custom-built low-cost UAV equipped with an onboard camera and an autonomous alignment system for operation in GPS-denied environments. The displacement time is extracted and analyzed in the frequency domain and compared to reference measurements from contact accelerometers and a finite element model. Experimental results show that all platforms successfully capture the fundamental frequency and its shift due to damage. Although the UAV exhibits slightly higher errors (up to 5.7%) due to platform-induced disturbances and sensing limitations, it reliably detects damage-induced frequency changes. Compared to commercial UAV systems, the proposed platform achieves comparable inspection performance at significantly lower cost. These results demonstrate that low-cost autonomous UAVs provide a practical, flexible, and scalable solution for structural health monitoring, particularly in scenarios where contact-based sensing is impractical. The findings also support the potential for the deployment of multiple cooperative UAVs to further enhance inspection coverage and robustness.

Unmanned aerial vehicles (UAVs) are cyber-physical systems whose attack surface spans networked avionics and on-board sensor fusion: a compromised GPS or battery module can mimic a benign mission segment and evade naive anomaly detectors. We present a leakage-free evaluation of quantum machine learning for UAV anomaly detection on the multi-sensor TLM:UAV benchmark. Three contributions support the study. (i) A group-aware temporal protocol (B2) partitions the dataset into ten contiguous TimeUS blocks and evaluates over ten seeds, eliminating the inflation produced by random stratified splits that mix neighbouring samples. (ii) A three-mode feature audit (full/loose/strict) quantifies how much accuracy stems from instantaneous physical signals versus contextual proxies (cumulative energy, battery state, GPS trajectory). (iii) A hybrid XGBoost + Data Reuploading (DRU) classifier is benchmarked against five paired non-linear controls (raw, PCA, polynomial-2, random-RBF, and an untrained DRU map) under identical budgets. The standalone DRU does not consistently match the strongest classical baseline across seeds; however, the trained-DRU hybrid is the only model whose mean F1 macro shifts upward from full to strict (+0.05), a directional signal that the per-seed standard deviations prevent from being interpreted as a statistically established difference. The trained-DRU hybrid also records the lowest mean false-alarm rate under proxy-free evaluation, subject to the inter-seed variance reported. We frame this as an incremental, reproducible quantum-enhanced hybrid benefit, and provide an open Qiskit 2.x implementation as a benchmark for cybersecurity analytics in NISQ-era aerospace systems.

Feed-forward 3D reconstruction has advanced rapidly, but current models remain unreliable in UAV photogrammetric acquisition. We argue that this failure is caused not only by appearance-domain shift, but also by UAV-specific camera-geometry variations, especially oblique views and HFOV-height ambiguity. Existing UAV datasets mainly emphasize scene diversity and provide limited coverage of camera configurations, which restricts robustness evaluation and UAV-domain adaptation. To address this gap, we introduce UAVFF3D, a geometry-aware real-synthetic benchmark for feed-forward UAV 3D reconstruction. UAVFF3D contains more than 170k real UAV images and more than 370k synthetic images rendered from high-quality textured 3D models, covering diverse HFOVs, flight altitudes, viewing directions, and acquisition patterns. It also includes a controlled HFOV-height test subset for diagnosing projection-geometry ambiguity. We further propose an evaluation protocol that jointly assesses camera-geometry estimation and dense scene reconstruction under a shared global alignment, avoiding the bias caused by separate camera and geometry alignments. Experiments on representative feed-forward reconstruction models show that UAVFF3D-based domain adaptation consistently improves camera and geometry estimation, reducing Ray Error by up to 84.2%, Pose ATE by up to 76.0%, and Chamfer Distance by up to 41.1%. In oblique scenes, adaptation reduces the oblique-nadir rotation gap by up to 90.7%. Under HFOV-height ambiguity, it improves robustness across HFOV-height configurations and yields more stable performance across HFOV settings. Incorporating camera priors further improves reconstruction under UAV-specific acquisition geometries. The dataset and evaluation code are available at https://github.com/yanxian-ll/UAVFF3D .

Semantic communication has emerged as a promising paradigm for enabling goal-oriented networking. However, most existing semantic communication solutions are tailored to one-shot tasks and optimize instantaneous performance. Hence, they cannot be used to support closed-loop dynamic systems with physical artificial intelligence (AI), in which the transmitted semantics affect not only the current inference outcome but also future control actions, state evolution, and ultimately long-horizon task performance. To address this gap, this paper investigates goal-oriented semantic communications for physical AI systems with closed-loop sensing-communication-inference-control. In particular, the problem of semantic communications is formulated as a long-term return-per-bit maximization under wireless bit-budget constraints while capturing both control efficiency and communication efficiency. To solve this problem, a novel causal information value (CIV) metric is introduced to evaluate the marginal contribution of each semantic token to the expected long-term return by transmission interventions. Then, a world-model-enabled causal digital twin (WM-CDT) framework is proposed to capture the dynamics of closed-loop physical AI systems and enable counterfactual reasoning for long-horizon imagined rollouts. Based on these imagined rollouts, an actor-critic policy is trained for long-horizon agent control with high data efficiency, while the semantic token selector is trained through CIV-per-bit evaluation. Extensive simulations on an AirSim-Sionna-based unmanned aerial vehicle (UAV) navigation simulator show that the proposed WM-CDT framework achieves significant improvement in return-per-kbit and navigation success rate compared to existing reinforcement learning solutions.

We present a highly detailed instance segmentation model for delineating individual tree crowns in natural broadleaf forests using aerial imagery acquired by unmanned aerial vehicles (UAVs). Tree crown delineation in broadleaf forests is more challenging than in other forest types due to diversity of crown shapes and the lack of clearly defined treetops. To address this issue, we developed a deep-learning-based crown segmentation model trained on high-quality annotated crown outlines. We manually delineated 18,507 crown polygons from orthomosaic images collected across seven forests in Japan by skilled annotators, and developed a model based on Mask2Former with multiple backbone architectures. The best model achieved high segmentation performance in structurally complex broadleaf forests using only RGB imagery. This performance was maintained when applied to geographically distinct forests within Japan, as well as to biologically distinct tropical rainforests in Borneo. These results demonstrate that using a large number of high-quality annotated datasets is critical for achieving detailed and generalizable crown segmentation across diverse forest ecosystems. The developed model has been integrated into DF Scanner Pro, a software that supports practical forest monitoring using UAVs, and this implementation is expected to enable a wide range of users to analyze tree-level information in broadleaf forest from UAVs.

This paper considers fixed-wing unmanned aerial vehicle (UAV) corridors comprising a main lane, a circular loiter lane for managing traffic congestion, and transit lanes connecting the two. In particular, we address the problem of conflict-free reinsertion of UAVs from the loiter lane back into the main lane. The loiter lane contains a fixed number of equidistant virtual slots that UAVs can occupy. Reinsertion of loiter UAVs into the main lane becomes essential either due to reduced traffic in the main lane or due to a loiter UAV needing to reach its destination urgently. Given the total number of loiter slots, UAV speed limits, and the minimum safety distance, a guidance algorithm is developed to compute the required speed of a loiter UAV in the transit lane to ensure safe reinsertion. The proposed guidance and automation strategies are validated through numerical simulations.